I can not Overclocked to 825mhz my LG gt 540 - GT540 Optimus General

I can not Overclocked to 825mhz my LG gt 540
Give to download files help me !

Psinitations said:
I can not Overclocked to 825mhz my LG gt 540
Give to download files help me !
Click to expand...
Click to collapse
What ROM are you using? Stock 2.1, 1.6? On stock roms you need to modify the kernel to enable overclocking with this tool http://www.4shared.com/file/IW2zYhM1/overclock__2_.html (only on stock 2.1) After that you can use the SetCpu tool to adjust the frequency.
If the problem is that the phone freezes after setting the freq to 852mhz, then it's the phone's fault - the processor drops the frequency and restarts (don't forget to untick the SetOnBoot option in CM Options if you use a high value, otherwise the phone will be restarted with the same high freq). Mine freezes too @852, i use it on 710mhz and runs smooth

bozont91 said:
What ROM are you using? Stock 2.1, 1.6? On stock roms you need to modify the kernel to enable overclocking with this tool http://www.4shared.com/file/IW2zYhM1/overclock__2_.html (only on stock 2.1) After that you can use the SetCpu tool to adjust the frequency.
If the problem is that the phone freezes after setting the freq to 852mhz, then it's the phone's fault - the processor drops the frequency and restarts (don't forget to untick the SetOnBoot option in CM Options if you use a high value, otherwise the phone will be restarted with the same high freq). Mine freezes too @852, i use it on 710mhz and runs smooth
Click to expand...
Click to collapse
So basiclly i can just flash one of the boot.img from that folder and it will work ( for 2.1 ) wright?? or...

900mhz
My phone can run @900mhz :LG GT540 with Android 2.3.4 Cyanogen Mod 7

Psinitations said:
I can not Overclocked to 825mhz my LG gt 540
Give to download files help me !
Click to expand...
Click to collapse
I only have a 764 mhz ROM can not do better!

apaszka said:
I only have a 764 mhz ROM can not do better!
Click to expand...
Click to collapse
well max clock speed is different from phone to phone mine is 880MHz and some others can only go to about 700MHz-<800 MHz (different silicone quality, guess im lucky )

Also depends on other configurations and the ROM itself

bozont91, I'm using stock 2.1 V20A, without fastboot, recovery and changed kernel. How to use it ? Will this work for me ?

well u must have recovery to do this X(

bs828 said:
well u must have recovery to do this X(
Click to expand...
Click to collapse
No, you only need fastboot to flash a boot.img with overclock support
Sent from my GT540 using XDA Premium App

So I need flash ROM with fastboot. I have too many apps and games, maybe another time. Is there any other way to "add" a recovery to stock 2.1 without FB ?

NikoPL said:
So I need flash ROM with fastboot. I have too many apps and games, maybe another time. Is there any other way to "add" a recovery to stock 2.1 without FB ?
Click to expand...
Click to collapse
use "mybackup root" to backup ur games and its data. as for recovery i dont think so.... my friend has a x8 and it only needs them to put a file in their system to have recovery.........

NikoPL said:
So I need flash ROM with fastboot. I have too many apps and games, maybe another time. Is there any other way to "add" a recovery to stock 2.1 without FB ?
Click to expand...
Click to collapse
Yeap! You can flash a Recovery ROM via Terminal but I think you need root permissions

jhonnyx1000 said:
Yeap! You can flash a Recovery ROM via Terminal but I think you need root permissions
Click to expand...
Click to collapse
dont you need to flash a recovery kdz or something??

You need a Recovery ROM and Terminal Emulator (from the Android Market)

jhonnyx1000 said:
You need a Recovery ROM and Terminal Emulator (from the Android Market)
Click to expand...
Click to collapse
I don't think he has one

Related

Is there no way of getting Android 1.6 back????

I hate 2.1, i think that it performs sluggishly on my phone, sure booting might be faster but everything else is sh*t!!
I have trouble installing apps, they download from the market but don't install!!!
Switching portrait to landscape takes forever!!!
And its just not very good, and as stable as 1.6, i never had any problems with 1.6 on it!!!
Is there ANYWAY at all to get back?????
PLEASE!!!!!!
I hate my phone because of this!!!
No there isnt any way, when you were upgrading, you should have known that already.
m4nu4l said:
No there isnt any way, when you were upgrading, you should have known that already.
Click to expand...
Click to collapse
I did but i didn't know that 2.1 was going to be so problematic for me!
Try to reflash to 2.1 again, see what happens, maybe you did something wrong that it is so laggy for you.
Try to reflash your phone THEN do a hard reset. That should alleviate most of your issues including the phone being sluggish.
Hey, i fixed it. Quarx rom is so fast.
Hi
flyboyovyick said:
Hey, i fixed it. Quarx rom is so fast.
Click to expand...
Click to collapse
Is quarx ROm a English ROM?
If yes then plz provide the kdz or link to that..
Thanks in advance.
Please tell me from where did you downloaded the Quarx rom and give me more details.
h**p://rghost.net/2898235
** to tt
extract it to your desk..
run flash.cmd as admin
have fun
Why downgrade to 1.6 man ?!
1. Upgrade it from 1.6 to 2.1
2. Upgrade 2.1 to 2.1 with fastboot
3. Upgrade 2.1 with fastboot to 2.1 with fastboot and Clockwork recovery
4. Add the latest KERNEL
5. Root the phone
6. Flash it with OpenSwift4.3 (most people got problems with 4.4)
7. Download SetCPU and clock it to max 806 - stable
8. Download LauncherPro from the net... Install it and make it your Defoult launcher
9. Now you got the cheapest and best mobile on the EARTH
Im using it without any problems and its quicker and better then my friends HTC Desire !!!!!!!!!!!!!!
btw. dont install any App Killers like Advanced Task Killer or something like that cause its killing your mobile, it doesent help you out... Kills your CPU and battery a lot !
I liked 1.6 but there are few apps I wanted that required 2.1 so I went with the Black Quarx rom, great so far and everything works (afaik). Still think its a shame that the original 1.6 rom isn't available.
torq1337 said:
it doesent help you out... Kills your CPU and battery a lot !
Click to expand...
Click to collapse
It does what ??? What about Task Manager?
how to back GT540 2.3 SwiftDroid CM7 Project Mur4ik and clean 2.3.1 to 2.1 normal?
^^
flash with kdz updater or if u have backed up last version u can easyly go back to last version ROM
if you get a yrecovery rom 1.6 you can do

[Q] best ROOTED apps for the S7

hey anyone have any good ROOTED apps for the s7?
please specify if its paid or free.
z4root works fine and easy to install/use
chan143 said:
hey anyone have any good ROOTED apps for the s7?
please specify if its paid or free.
Click to expand...
Click to collapse
Titanium Backup is free or paid and lets you back up your programs and unistall the factory ones i f you want.
Root explorer lets you see and modify the system files and is free.
SetCPU is a paid app but lets you overclock or underclock. You have to have a kernel or Rom that will allow changing the CPU frequency though.
nrage23 said:
Titanium Backup is free or paid and lets you back up your programs and unistall the factory ones i f you want.
Root explorer lets you see and modify the system files and is free.
SetCPU is a paid app but lets you overclock or underclock. You have to have a kernel or Rom that will allow changing the CPU frequency though.
Click to expand...
Click to collapse
thank you, i have all of those. overclocked my S7 to about 1.2 ghz. ive gone higher but im afraid.
can someone give me step by step instructions to root my S7, either with z4 or universal... plz and thank u...
How did you overclock that much? the kernel doest support it as far as i know.
chan143 said:
thank you, i have all of those. overclocked my S7 to about 1.2 ghz. ive gone higher but im afraid.
Click to expand...
Click to collapse
how did you overclock to 1.2 GHz?
my ideos s7 comes with 1 GHz default, and setcpu does not have option to oc over 1 GHz.
use super 1 click v 1.7 if froyo or z4root if still eclair,
search here to find:
http://www.androidtablets.net/forum/huawei-ideos-s7-technical/
chan143 said:
thank you, i have all of those. overclocked my S7 to about 1.2 ghz. ive gone higher but im afraid.
Click to expand...
Click to collapse
How did u get it overclocked to 1.2ghz

CyanogenMod 7 crashes

well i don't know why this mod won't work for me..
i've tried a few of the nightlies and now the rc1, and it just kills my phone.
it installs all fine, and if i dont touch the phone its ok.. but as soon as i start to try and do anything on the phone... open the menu, or apps screen anything... after about 5secs the phone just crashes and restarts.
Flash the 4.1 kernel
You can flash 4.1 kernel from jacob thread.or instal setcpu and reduce the max freq abit
subwars said:
well i don't know why this mod won't work for me..
i've tried a few of the nightlies and now the rc1, and it just kills my phone.
it installs all fine, and if i dont touch the phone its ok.. but as soon as i start to try and do anything on the phone... open the menu, or apps screen anything... after about 5secs the phone just crashes and restarts.
Click to expand...
Click to collapse
Sent from my HTC Wildfire using XDA App
thanks Michealtbh the 4.1 defiantly worked.... from what i saw on the thread about it, is the cm7 mods (4.2?) kernal natively putting the clock at 768, cause mine does crash at that 748 seems stable. but run at 729 to be safe
Funnnny, yes that probably would of worked too by the looks of it... only problem is i couldn't get it to stay alive long enough to even install it
question.. with 4.1 installed and setcpu all up and going running at 729.. could i then now reinstall the original 4.2? kernal ???? is it better or just leave it alone?

[ROM] B160 - New OC Kernel, Root, Wifi-tether

I take no responsibility for any harm that comes to your phone as a result of applying this mod.
Rom based on Official B160.
Features
Kernel from genolokar (available here), see note 1 below for overclocking info.
Rooted and latest SuperUser
Native froyo wifi tethering
WyContacts 1.2 and XDA Dialer 30.1 (turn to silence, blacklist, many other features)
CM 6.1 Email app and wallpapers
Launcher Pro 0.8.5
Some build.prop tweaks
Same enhancements that are claimed for B160 (better call quality, better wireless, better camera)
Installation will not format /data or remove apps from /cust. For some roms (unicom in particular) this will cause problems due to some incompatibilities, and will require a factory reset to function correctly.
BIG THANKS to genokolar for creating the new kernel
Requirements
Clockworkmod recovery (available here)
Should be compatible with all rom and cust versions, though as stated some will require a factory reset. Please post your findings.
Downloads
Complete rom with all fixes and 1.5Ghz kernel: http://www.multiupload.com/0HR8W3BMUR (updated 15/5/11)
Update with all fixes and 1.5GHz kernel http://www.multiupload.com/OISOHEHTDP
1.8Ghz Kernel (use above download to revert to 1.5GHz kernel): http://www.multiupload.com/T7C4N0Q1CQ
Installation
Copy update.zip to your sdcard
Boot to clockworkmod recovery
(Optional) Perform a full backup [see note 2]. After backing up reboot recovery (in the advanced menu)
Apply update from sdcard
After update is compete wipe dalvik cache (in the advanced menu)
Reboot to system. First boot will be slow as it rebuilds the dalvik cache so be patient, successive boots will be back to normal.
(Optional) If everything is fine delete the backup from step 3 and if you like do another backup
Notes
By default the kernel is set to the default cpu governor and clock speed. If you would like to overclock I suggest using setcpu (available here)
Be aware that after applying this you won't be able to restore the full backup unless you either revert to the original rom, or change the boot image. The purpose of the backup is instead to have a backup of /data just in case something goes wrong.
Not good with CUSTC205D001 Finland Elisa, swype force closes constantly
That's a shame, can you try deleting libswypecore.so from /system/lib ?
Great rom. My phone has no problems with 1.5ghz launcher pro is an awesome inclusion I l love the sideways home screen.
Sent from my IDEOS X5 using XDA App
When first boot takes over 30min what do you recommend?
EDIT: Power Cycle did the trick. I did a batterystats wipe and fixed permissons before first boot maybe thats why it hanged. I upgraded from general to stockwells 136 and then this.
Thanks for this great ROM!
The only thing I noticed is that the camera has bad colors. Can somone confirm?
Thanks!
Sent from my IDEOS X5 using Tapatalk
Colors are fine here
Sent from my u8800
Hmm, will try a new installation ....
Sent from my IDEOS X5 using Tapatalk
what when it reboots always?
Market appears to be broken now.
Edit - Looks like it had more to do with my crappy internet situation at the time than anything else. Market is working.
rikobiff said:
Hmm, will try a new installation ....
Sent from my IDEOS X5 using Tapatalk
Click to expand...
Click to collapse
Noop, must go back to stock...
it often freezes now.
which cpu Frequenz is the best?
Sent from my u8800 using XDA App
levibuko said:
it often freezes now.
which cpu Frequenz is the best?
Sent from my u8800 using XDA App
Click to expand...
Click to collapse
I use stock with smartass governor.
levibuko said:
it often freezes now.
which cpu Frequenz is the best?
Sent from my u8800 using XDA App
Click to expand...
Click to collapse
Mine was freezing when running at 1500, tuned it down to 1200 and working like a charm so far
My phone won't sleep after flashing this... Did a backup before flashing, but a restore won't help. Suggestions?
How do I go back to stock ROM?
blup1 said:
My phone won't sleep after flashing this... Did a backup before flashing, but a restore won't help. Suggestions?
How do I go back to stock ROM?
Click to expand...
Click to collapse
Did you try a factory reset?
Working Great, Thanks
camera wrong color
rikobiff said:
Thanks for this great ROM!
The only thing I noticed is that the camera has bad colors. Can somone confirm?
Thanks!
Sent from my IDEOS X5 using Tapatalk
Click to expand...
Click to collapse
same camera problem here, will a factory reset fix it,thx
wmi543 said:
same camera problem here, will a factory reset fix it,thx
Click to expand...
Click to collapse
Sorry, looks like I included the wrong camera libs. This should fix things up.
http://www.multiupload.com/T0VX44J523
stockwell said:
Sorry, looks like I included the wrong camera libs. This should fix things up.
http://www.multiupload.com/T0VX44J523
Click to expand...
Click to collapse
What's the procedure we should use for updating?

Max CPU 1,5GHz CANT CHANGE

what the hell guyz, i got 1,5GHz and when i apply my settings it's automatically changing back to 1,5...
HELP
@edit,
now i have 1497600 ! why is it happening? i'm playing GTA: San Andreas
Paviano said:
what the hell guyz, i got 1,5GHz and when i apply my settings it's automatically changing back to 1,5...
HELP
@edit,
now i have 1497600 ! why is it happening? i'm playing GTA: San Andreas
Click to expand...
Click to collapse
Check if u have any other app which sets the cpu. Or maybe power safe mode enabled?
I had this issue running synapse and set cpu.
Power Saver Enabled. Check it out.
no, i checked and save mode is off and i don't have any other app which controls my cpu i think. i deleted rom toolbox pro and still was changing, now i'm on stock kernel and i don't know yet if it still touches my settings or not. i was using lean kernel 2.5.1 anyway, now stock nd6
Paviano said:
what the hell guyz, i got 1,5GHz and when i apply my settings it's automatically changing back to 1,5...
HELP
@edit,
now i have 1497600 ! why is it happening? i'm playing GTA: San Andreas
Click to expand...
Click to collapse
Yea i'm having the same problem. My cpu is limited to 1.48 Ghz after i switched between a few kernels for the past few days. I'll do clean rom reflash when i got time
Rosli59564 said:
Yea i'm having the same problem. My cpu is limited to 1.48 Ghz after i switched between a few kernels for the past few days. I'll do clean rom reflash when i got time
Click to expand...
Click to collapse
tried doing wipe dalvik cache and just wipe cache in CWM?
Paviano said:
tried doing wipe dalvik cache and just wipe cache in CWM?
Click to expand...
Click to collapse
I did everytime i flash a kernel but now it's just locked up at that speed.
Rom reflash should get rid of it.:good:
Rosli59564 said:
I did everytime i flash a kernel but now it's just locked up at that speed.
Rom reflash should get rid of it.:good:
Click to expand...
Click to collapse
i flashed stock kernel and as far as now it's working. i will try testing GTA:SA again if it changes and how is it working too
okay, so the problem is here again... unfortunately. i'm gonna flash new rom again, stock deodexed like in my signature but i don't know if it is worth flashing custom kernels or just stay on stock.
Paviano said:
okay, so the problem is here again... unfortunately. i'm gonna flash new rom again, stock deodexed like in my signature but i don't know if it is worth flashing custom kernels or just stay on stock.
Click to expand...
Click to collapse
Do what u prefer. The CPU lock should not be from custom kernel. I tried most of the kernels especially lk. Can u put all root related apps in one window and make a screen shot?
Edit. Rom flash does not necessarily get rid of the issue when restoring I had and sometimes still have the CPU lock when playing around with kernels and settings.

Categories

Resources