[Q] HD2 Standby of Death HELP? - HD2 General

I just took a backup with sprite backup of my hd2, due to it had a problem with the microUSB contacts. It worked fine.
I just got a new replacement device, same rom, just seems to be a different display(The old one just got a point matrix with a huge distance between and some lines through it, the new one got this, but additionally a smaller point matrix not reaching the outer border of the screen), a less powerful vibration and lower quality bottombar buttons(Seems to be an improvement by htc xD).
I made a hard reset of the device, inserted my sd/sim and ran my backup as level 3. First thing I noticed that the orange led does not blink once a while to indicate that the network is available.
Everything seems to be fine, except that the device seems to freeze if it is longer in standby. I press a button to wake up, just the bottombar light goes on and shuts off after a while. If I try this some more times the bottombar stops from going on and the phone seems to be off. Its like off, except you are unable to turn it on .
If I try to phone it, I get the usally waiting tone on my phone but the hd2 does nothing.

If htc sense is disabled it works fine
lets try to fix it!

Sounds as if your replacement unit might be a bricked unit, too.
But, let´s not hope the worst... I can think of other possible things: Did you try the same ROM without using the backup for a couple of hours? Are both the SD card and the SIM card fine?

Its only happening with the backup. Its htc sense.
Is there any cab that reinstalls htc sense?

The only way to re-install Sense is by flashing a ROM, there is no cab.

That would make my backup useless. Is there any way to exclude the manilla files from the backup. A list of files would be enough :-/
So fixed it by restoring everything except all files in the windows dir. Then I copied over all files in the windows dir i needed .

Related

Phone reset itself! Any idea why?

I have an O2 XDA2. I just took the phone out of my jacket pocket to find that it wanted me to calibrate the screen. It went on to take me through the whole set-up wizard and then I found that all my data and installed programs had been lost
I'm guessing the phone decided it wanted to reset itself!
Does anyone have any idea why this might have happened so I can avoid it happening again?
The phone had plenty of battery power (approx 80%). It had plenty of space space (approx 28MB). I hadn't recently installed any software although I did uninstall Pocket Money on the weekend. I also created an IMAP email account then but I've had no problem with the phone since then until now.
Any ideas? Thanks very much
would prob be a good idear if you stated the rom version you are using
Sorry, It's 1.60.00 WWE
I have never upgraded it as I haven't the first idea how or what the implications are.
the latest officail rom is 1.72
if you get that from their site you will not get warrenty issues
when i used 1.66 i had lockups from time to time
after i got 1.72
i havent had any issues
I don't really feel comfortable upgrading it as I haven't the first idea what to do.
How do you normally reset a device? Is it something I could have done by accident?
there is a little hole in the buttom of it in the right corner if you press that using something thin like the stylus while you press the on button
then it hardreset
but there is software which let you do it as well
the upgrade is really pretty simpel
Thanks very much. I know the reset button, I use that every now and again. There's no way I could have pressed it and the on switch by accident given tha the phone was in an otherwise empty jacket pocket.
Oh well, I guess my phone just had enough of life. I'll look into upgrading the ROM when I feel a bit more adventurous
Fabulous...My phone has again decided to reset itself out of the blue.
I have no idea why it does this but it's a pain in the rear. Has anyone seen this before? Does anyone know if there's anything I can do to prevent it? (other than upgrading to the Universal when it comes out!!)
And it's happened again...seems to happen approximately once a month.
Has this spontaneous hard reset issue not happened to anyone else?
I suffered this audacious curse only to find that by removing my 1gig sd card remedied the problem.
I'm wondering if the sd card draws too much power/resources or whether I have a dodgy sd card.
Either way, without it I'm flying. I pop it in when I need to use my TomTom and as it's on charge in the car cradle it doesnt matter about resource usage etc.
So, try removing your sd card and see what goes
SD cards seem to be causing all sorts of problems. I kept getting the eternal spinning timer when copy, paste or deleting files, if the card was inserted. Did a soft reset today to be met with the calibration screen as from a hard reset. Such fun isnt it. :roll:
Hi Guys
Thanks very much for your comments. Unfortunately it isn't the cause as I have had my SD slot empty for a while now (my SD card is in my new car radio/MP3 player )
I'm starting to think that after 15 months my XDA2 has decided that it's had enough of the world. My colleague told me that it's seeking revenge as it's heard me salivate over its younger sister (the Universal).
As you say having the phone hard reset itself is a whole lot of fun!
I have the Sprite Back Up programe so all is not lost - it creates an exe file on the SD card that you locate and select thus restoring everything just how it was before it was lost
one can also just have activesync do an inc backup at each sync
and if the device hardresets one can connect as guest and restore the backup from ones normal profile
The nice thing about the Sprite software is that you can restore when you're out and about unlike the active sync method which means you need your pc close by

Problems with 8525

A few days ago, I bought an 8525 phone off my friend for $25. He told me that he only used the phone for a month, so it was practically brand new. I have been tinkering with it for the past couple days, using Wifi to download games and things, and it has been fine. The phone worked, texting worked, everything was perfect.
About two days ago, I accidentally dropped it about a foot onto wet asphalt. The battery fell out and the touch screen got a few drops on it, but I dried it all off, turned on the phone and tested everything; no problems from dropping it.
At some point later that night, the phone started having problems. It would randomly freeze every few minutes while in use, and I would have to take out the battery to reset it. Some buttons on the touch screen wouldn't respond at times, but then work later (the buttons next to volume, service and wifi or whatever). Then my texting and phone service stopped working. I couldn't get service anywhere that I walked, and the Settings button wouldn't work. I also tried to reconfigure the connection, but that didn't help.
I came home and found the phone I had previously, and I put the SIM card into it to see if that was the problem, which it is not. The old phone works fine with the SIM.
I don't know what the problem is, but there are a few things that may have caused it to happen:
-dropped it in rain
-plugged USB into a laptop that only turns on, but does nothing else
-maybe got virus from browsing internet on Wifi
-overheating (there was a point where the back was really hot after sitting on the USB)
-games/applications installed messing with system
Those are some examples of what I've done with the phone, but that's it.
Here is device info:
-Hermes 8525
-Windows Mobile 6 Pro
-CE OS 5.2.1948 (Build 18548.0.7.0)
-Processor: SC32442-400MHz
-ROM Version: Schap's 4.31
-ROM Date: 10/03/07
Sorry if I haven't provided enough information on the problem, I'm new to all of this stuff, but I hope somebody can help.
Actually, my problem has changed.
I attempted to put a new ROM on, and it seems I did something wrong. When I turn on my phone, it does the boot animation, and then the screen turns white and doesn't do anything else. I attempted to hard-reboot, but nothing happened.
I went into My Computer on my desktop, and the folder 'Mobile Device' showed up. I clicked inside of it, and apparently my entire OS is gone off the phone. How do I install a new OS?
I hope you had Hard SPL V7 installed or you will need to find your shipped stock rom.
If you did, great.
1. Format 2Gb or less sd card FAT32. Copy .nbh file of rom onto it and rename to hermimg.nbh.
2. Insert sd card into Hermes and boot into bootloader.
3. If you did everything right then follow onscreen instructions.
If you didn't & can't find your shipped stock rom, you are now the proud owner of a Hermes paperweight....
Instead of taking the battery out, there is a reset hole on the bottom near the IR port. Push in with your stylus.
I have the "No GSM" text showing up when I turn on the phone, and then it goes to the white screen. I tried to do the mtty.exe thing, but I couldn't figure out how to use the program.
I was going to try the fix that uses Visual Studio and Windows Embedded, but I'm pretty sure my phone doesn't have kitl (which I need to do that).
Most of the fixes suggested require using ActiveSync to connect to the phone, however, my ActiveSync doesn't connect. It knows the phone is there, but it can't connect, which disables me from updating the ROM.
When I attempt to flash a ROM, it says that the current ROM image on the phone is ' ' (just an empty space) and it asks if I want to update to the newer ROM image. It gets to the point where the progress bar appears on my phones screen, but as soon as it hits 1%, the whole thing fails and I get an error on the computer saying it could not connect.
Currently, I am attempting the method to fix the white screen by removing the battery for 20 minutes, and then I'm going to try the method that says to remove the battery and put it back in multiple times to fix the 'No GSM', but I'm pretty sure I messed the radio up.
@ultramag69 - I have an SD card, but I don't have a port or anything small enough on my computer to insert it. What should I do to do what you said?
Buy an adaptor, should only be a few bucks...
SD method is the easiest way to fix the problem BUT as was said earlier , you need Hard SPL V7 on your Hermes 1st.
You could also try putting your Hermes into bootloader, attaching it to the USB and flashing that way. Just make sure that "Allow USB Connections" has been unticked in Activesync on the PC.
At least you might be able to install Hard SPL V7 that way...

Black Screen / Indicator Lights On - No Response

Hi,
So I have an UnBranded Rogers X10a Phone
I have been having issues where the phone will freeze up go black screen (but you can see the backlight is on) and the two indicator lights come on. They go on and off with the power button being pressed. The only way to get the phone re-working is by battery pulling... I am running the Stock Home screen,
no taskkillers, and just Beautiful Widgets (Which has been force closing alot)
I have attempted a few factory resets including the Memory card but still running into the same issue...
Any Suggestions?
Try removing the widgets...
-------------------------------------
Sent via the XDA Tapatalk App
SEUS reflashing???
Thanx for the Suggestions
Hey Guys,
Thanks for the suggestions - I have tried removing the widgets, and a complete re-flash from SESU - Still no luck...
Hey, had to create an account just to answer your queries...
If you mean by the phone not able to 'wake up' from its sleep mode, I experienced the same thing for the past one month...
For my case, I started one saturday with my phone acting this way when I did a reboot after a full charge.
Same as your phone, mine suddenly couldn't wake up from its sleep. I thought is was just an ordinary freeze, so I took out the battery to reboot it once more.
After that, the problem didn't do away. With an attempted phonecall which triggered the proximity sensor to deactivate the screen display, the screen couldn't come back after ending the call. So the suspicion of lags or freezings were ruled out.
The phone was basically working, just that the display wouldn't appear. This was supported by the fact that the LED lights between the hard keys were still functioning, and the faint backlight on the screen hows that the phone is indeed working.
But the unlock screen just wouldn't show up.
So, without a choice, I sent it for servicing.
First attempt, the phone had a 'software upgrade' (just reinstallation of the software). Didn't help.
2nd attempt, the technicians replaced the receiver hardware. Didn't work either.
3rd attempt, they did another software upgrade (I have absolutely no idea why they tried that again since it didn't work on the first time).
4th attempt, they replaced the whole motherboard, and I got it back last night.
And you know what? The problem didn't go away. But I didn't send it back for servicing, since replacing the motherboard IS already a very last possible solution, as my X10 is as good as a new phone.
So obviously it's the user's problem.
So I did abit of testing on my own.
With the microsd card taken out, the phone was perfectly ok. I spammed the power button to stress-test the screen. No problem. But when I re-inserted my 16gb card, the sickening problem was back.
So I suspected it might be the card that's faulty. Naturally, I tried it with my 8gb card which came bundled with the phone. No problem. Until I moved my files into it.
Narrowing it down, obviously it's the contents that is affecting the phone.
So I did a step-by-step trial:
I removed the video folder, cos I have quite a number of movies inside. So I thought it's the sheer sizes of the files which is lagging the phone out.
Wrong.
Next, I removed the music files.
BINGO.
Phone was working fine. And to make sure, I put the videos back. Screen responding nicely.
To enact my theory, I just dragged and dropped my 1600+ wmas into the music folder.
Voila! Case closed. 20 hours have gone, and that idiotic problem never resurfaced.
So... What actually happened???
Well, as I recall, this whole escapade happened after I used Media Go to transfer my music to my phone.
And Media Go acts like iTunes - it sorts the files into different folders categorized by the artiste names. So essentially, almost a thousand of folders were created in the microsd card.
I guess it's the immense number of folders that's making the phone try to read from the folders, thus lagging it and preventing it to work before the screen goes back to sleep.
For me, cutting the number of folders helped.
Hope my method works for you too =)
And pardon my long-windedness (+_+)
Thanks loneLEE for making an account here & telling us about all that. It may help for many who have or will have such kind of problem Thanks
Thank You Soo Much
Lonnee Thank you so much for you information on that! I was going BONKERS. I had figured it was to do with the Media Card, as soon as I would remove it - the phone would work fine...
I almost had them swap out the phone as I was going STIR CRAZY trying to figure out what was going on!
It's good to know that I am not the only one...

Phone Keep restarting

Hi, I'm having a big problem with my device, I've bought the European version and didn't touch the ROM or radio for a cool 3 months, but I often update to the latest Cookie HT, and lots of different apps. Then it got a weird behavior that if I use the device and it got a little hot it would restart by itself and after the restart got stuck on the white logo screen. It would happen often when plugged and Activesynced to my computer.
I lived with this situation for the past month but now I had enough, I've updated the radio to the latest I could find, and the ROM to Energy with Cookie HT.
Now it's worse, I can't get it to stable on the Home screen, I can see it but can't play with anything, stuck...
And BTW when it get stuck the bottom of the phone is quite hot, even if I left it for quite some time.
Edit : The Sense UI isn't loading and it actually a good bug, cause the device is running smoothly even on ActiveSync. It feels like the CHT is to blame, at least the latest one to date.
Edit 2 : Sorry, I was wrong, now it got stuck during SPB backup restoring connected to ActiveSync.
Edit 3, Sorry 2 : I've let it cool, turned it on and somehow the CHT is back and working wonderfully, this is weirder then I thought.
Edit 4 : I've managed to run Android 2.1 Desire and it was running good until it got a little warm and then froze. I'm beginning to suspect this is a hardware issue.
I realy need help feaguring this one out.
I've replaced a couple of Radio versions and this device keep jamming up, it's now unusable. I need to get it relaxed and cold before I try to turn it on again.
Can it be that the ROM is responsible ? should I go back to the stock with no mod at all (it would KILL me though).
I'm frastrated and thinking of selling the phone if anyone would buy this piece of crap.
i am in the same boat mate.
mine is going back to htc tomorrow.
In the end i removed everything and took the rom/radio back to stock still the 'heat' issue exists.
It has been like this on test for nearly two weeks if i try to run the youtube app the phone switches off anything more intense and it hard resets itself.
I have learnt that if you leave it too cool down battery out etc it will switch back on and if you do nothing but make phone calls it will be ok?
Having read alot it appears this issue happens if the device goes over a certain temp. For example folks have been moaning about the phone switching off if used in a car whilst charging running sat nav.
I advise you to contact htc as i have done.
you may have already done this, but did you do a task 29 before flashing the rom (task 29 wipes the phone and gives you a clean base to start from). Also delete the application data on your mem card(important). If your phone wont boot you can enter the bootloader by removing batt and holding vol down as soon as you you put the batt back in,This will put you onto bootloader screen ( if you have hspl installed?) from here you can do task 29 and reflash your chosen rom. Oh and make sure you have required radio for the rom you choose. hope this is of some help thought id try
Just wanted to update that HTC took an effort and accepted my unwarranted device for fixing. They replaced the board and sent it back on their expense. The device now is working flawlessly !
Thanks to HTC for a GREAT customer service and support !!!

[Q] G-Sensor Problem

Hi experts,
I recently installed the LEO "Stock" NAND Android ROM from DFT to my HTC HD2. I have the famous G-Sensor Problem. My phone is working perfectly when it is upside down (no black screen on making/ending a phone call and proximity sensor working). I tried calibrating upside down, but no success.
Further investigating, I found bm150.usr solution but:
- Installed "File Expert"
- I made a backup of existing bm150.usr
- I copied the new bm150usr overwriting the old one.
- Restarted. No success.
Further reading, found that I need to delete .txt files under data/misc, however I can't see anything under data/misc.
I have SuperUser installed, how can I use it?
What is rooting?
What is mounting?
I have been trying almost 3 hours, please help!
Thanks...
Ok I downloaded and installed prj_build_v0.3.2. The G-Sensor is calibrating properly. I can see the data/misc folder, so I applied bm150.usr. However during a call, whenever I turn the phone facing UP the screen goes black and turn the phone downwards (facing the ground) the screen gets back! This is really driving me crazy... Is it a hardware fault?
I've been searching for this problem about a month now, flashing at least 10 ROMs, radios etc, with no success. I found this video googling which describes exactly my problem:
http://www.youtube.com/watch?v=vCloMmboCl8
Another example:
http://www.youtube.com/watch?v=49-LdNvM4Pw
I like my phone running Android. Fits my expectations, visual style, performance, sync with Outlook etc. But, it's really hard to use the phone like this when I call a bank or similar, struggling to dial the next extension. My choices are either go outside to sunlight or dial upside down people staring me like a cow...
Right now, I am using Typhoon CM7 ROM from this thread:
http://forum.xda-developers.com/showthread.php?t=933951
which is a very nice ROM especially with the sound enhancement. Congratulations on the developer! But, my problem still continues...
Please can somebody help me. I'm really frustrated with this problem.
(I wish I could post this message to the right thread. But I'm rookie without 10 messages )

Categories

Resources