[Q] Nook Touch doesn't wake up - Nook Touch General

Hi booard,
I've a problem with my STR. I let it untouched for a little while (like 2 weeks) and I guess the battery emptied, as I was unable to wake it up.
I've plugged it the whole day but there is still no sign of life. I pressed the power button for 30s (which I think should be the reset to factory button) but still no luck.
Any advice? (As I live in France brigging it back to the store is not an option )
Thx in advance!

Anyone?

First sign of life : the charging LED switches from green to orange and now seems more on the orange side.
Maybe a bad electrical contact?

Ok. I encountered a similar problem, which I think was a result of me running too many apps simultaneously in the background draining too much of my battery. I tried different methods of turning it back on but unsuccessfully. I was playing around with. I tried plugging and unplugging the USB cable hooked to the computer USB port at various times, while trying to turn the device on. One time the led light would only stay green. Other time the screen changed color to some kind of weird shade of gray. I was charging it for over 3 hours without any luck of turning it back on.
Eventually I got an idea where I used the fact that the electric plugs in my country are 230V instead of 110V typical for the US. The whole idea was hooking my nook up to this extra power without using reduction, knowing the risk of burning the nook of course. So I was charging it for like 30 minutes plugged to 230V, it was still telling me to wait for it to boot up on it's own after 15 minutes, however I tried to turn it on again and voila the damn thing booted up.

Related

Flashing red led of death

Hi everyone, yesterday I took my G1 from my pocket (after using it normally for some hours) and it was turned off. I thought the battery was dead (I left it at about 20% charge) so I tried to turn it back on and surprise...no vital signs at all. The phone didn't turn on, and the led was dead. After losing half of my hair, I tried removing the battery and placing it back. Now the phone behaves like this; when I press the power button, as long as I keep it pressed the led flashes red and that's it. When I stop pressing the power button the led stops flashing. When I plug the usb cable, the led gives a solid red and stays like that forever.
Please someone tell me it's just a screwed up battery...please
Neuromansa said:
Hi everyone, yesterday I took my G1 from my pocket (after using it normally for some hours) and it was turned off. I thought the battery was dead (I left it at about 20% charge) so I tried to turn it back on and surprise...no vital signs at all. The phone didn't turn on, and the led was dead. After losing half of my hair, I tried removing the battery and placing it back. Now the phone behaves like this; when I press the power button, as long as I keep it pressed the led flashes red and that's it. When I stop pressing the power button the led stops flashing. When I plug the usb cable, the led gives a solid red and stays like that forever.
Please someone tell me it's just a screwed up battery...please
Click to expand...
Click to collapse
Probably bad battery. It is certainly worth it to at least try another battery -- they're dirt cheap anyways, or better yet, BORROW one.
* Solid green (when connected to the power adapter): The battery is fully charged.
* Solid red (when connected to the power adapter): The battery is charging.
* Flashing red: The battery is low and needs to be charged.
* Flashing green: There is a new notification.
Neuromansa said:
Hi everyone, yesterday I took my G1 from my pocket (after using it normally for some hours) and it was turned off. I thought the battery was dead (I left it at about 20% charge) so I tried to turn it back on and surprise...no vital signs at all. The phone didn't turn on, and the led was dead. After losing half of my hair, I tried removing the battery and placing it back. Now the phone behaves like this; when I press the power button, as long as I keep it pressed the led flashes red and that's it. When I stop pressing the power button the led stops flashing. When I plug the usb cable, the led gives a solid red and stays like that forever.
Please someone tell me it's just a screwed up battery...please
Click to expand...
Click to collapse
Leave it to charge for 30 minutes or so, then try to power on. should be okay
better to charge from ac power if u can
Its possible your charger could be faulty.
I have the same problem, has anyone found a solution?
Try leaving it charge for a good hour, or just go out and try a new battery, could just be dead.
Sent from my Xoom
sometimes if a battery gets to low it wont even charge... not just for phones but cameras too and so on..... iv had to do this to cell phones and cameras.... take a usb cord you dont care about and cut it and expose the red and black wires..... look for the positive on your battery and negative, usually its marked, how positive to positive and negative to negative for 30 seconds to a minute while its plugged into the computer then, pop the battery back into the phone and try to charge..... everytime iv had to do this for a freind or something of my own the battery has lasted over a year after with no problems.... just a suggestion
Thanks for the suggestions. I had already ordered a new battery and the phone boots up with it but it won't charge on or off and usb isn't recognized either. I tried wiggling the plug around to see if it was some kind of loose connection but it doesn't appear to be the case. I may take the phone apart and see if anything is loose but otherwise I'll just have to enjoy the last 30% battery of G1 time I have.

[Q] n4 is completely unresponsive (dead)

So this is what happened:
the phone discharged fully and i connected it to charge. then i got a flashing red led. seeing this as a bad omen i tried to turn my device on - no luck - it wasn't responding.
i unplugged the charger and plugged it back in and again the same result, then again..... and i got a solid red light. so after a few times of messing about with it , trying out a few sources of power and such i got it charging (the battery logo appeared). The charging lasted for ~30 sec and it went black.
So after that the n4 is completely unresponsive. No flashing leds no backlight on screen, NOTHING.i tried out a few chargers and cables and beside those i used a genuine n4 charger (it's 100% working - i tried to charge another device). i left it there for the whole day to charge thinking that maaaaaby the battery ran to a complete 0 and i just need to give it time, as you probably guessed it, that did nothing.
In fact, i think the phone is not charging at all. The reason i think so is because the wall charger is emitting a faint high-pitch squeal regardless of the fact that the phone is connected (it should be squealing only when it's plugged into socket and the phone is not plugged in it)
so TL DR:
n4 is completely dead, no signs of life. The things that were tried:
a handful of chargers and cables that are 100% working on other devices
trying to boot with a combination of volume buttons pressed
holding the power button for 60 sec. while plugged in
prolonged charging (~7 hours)
verbal threatening to sell the damned thing if it's a serious problem
so that's that. i should get my tools back from a friend on monday. i'll try to take it apart, maby there's a loose connector here or there or something. Any ideas what i could try before that?
Some searching around the forums wouldn't hurt. Try this for example.
kalopop said:
Some searching around the forums wouldn't hurt. Try this for example.
Click to expand...
Click to collapse
thanks for the link, that seems to be worth a shot.... i'll be able to take the phone apart on monday, that's the earliest i will be able to try it. i was wondering if there is anything i can do until then to remedy the situation. I mean i'm really getting a kick out of my old sony erricson k300 but i kinda prefer the nexus and would prefer to fix it asap.
ok i fixed it
i used a 3v source and held the contacts manually for 5 min. that returned it to the red blinking led state and after leaving it to charge for 5 min it returned to the battery icon on screen. thanks for the info again.

[Q] Nexus 7 dead?

I was on my computer when i remembered i has something written in my tablet's notes that was important. I took it out of my bag and noticed it wouldn't turn on, it was out of battery (hadn't touched it for about a week). I just plugged it in the proper asus charger and put it down and went straight back on my computer.
I decide to check on it after 2 hours thinking it would be near or fully charged. I pick it up and noticed it was on a blank back lit screen. I unplugged it and then the screen turned straight off. Wondering if it didn't charge at all i re-plugged it in. There was no google logo (rooted), instead it turn on with a lit black screen and off and repeating a few times and then small thin artifact pixels run across the screen (red, blue and yellowy colours) and then stay at a black lit screen like when i first picked it up. I had just noticed a small buzzing sound while this was happening and still does so when stuck at the screen. I'm pretty sure it was buzzing when i had found it.
I redid what i had done (unplug, replug) and watch to see if it did the same thing. It did. I tried to power it off while it was at the black screen and it did, but then it would turn back on and etc. Same if i tried to enter boot loader or any key combinations.
I've tried disconnecting the battery and reconnecting and same effect (tried it without battery attached also)
I have a feeling it is dead now and i have no other ideas (checked many forums but got nothing).
Any help would be appreciated.
yvgamer94 said:
I have a feeling it is dead now and i have no other ideas (checked many forums but got nothing).
Any help would be appreciated.
Click to expand...
Click to collapse
It's surely hardware failure, have take some humidity or something like that?
Try press power for 60 seconds, if you wont see any Google logo there's some hardware failure you need to RMA ( http://en.wikipedia.org/wiki/Return_merchandise_authorization )
found the fix
I found away to fix my nexus 7. You could be right how it might have a minor hardware fault, live in australia in the high hot tropics (high humidity). I decide just to plug it into my computer usb charger instead of the proper charger since it had a lower max amp output. Against my ear, a much fainter buzzing is still heard but this time, there was nothing. No power, no back lit black screen, just a very faint buzzing. Decided to let it sit just to see what happens. After an hour or so, i decided to press the power button and noticed there was a battery charging signal. To my delight, I'm sure it was in working order now so i powered it on and oh how relieved i was.
I determined that my device might have had a small hardware fault that made it draw to much power from the 2 amp original charger and thus why the tablet could not boot up properly (from battery depletion). Either that or my charger could be bugged to. But the thing is, since it charged to slow from the usb, i plugged in the proper charger and it worked fine. Just have to try not deplete my battery i guess.
Thanks.

[Q] NST False Empty Battery

I've had my NST Glowlight for roughly a year (so the warranty's run out). I haven't used it since October or so, and when I tried to charge and boot it recently, it doesn't do anything. When I plug it in, the green LED immediately turns on, and if I wiggle the charging cable a bit, it'll turn to amber, but no matter what I do, the thing won't turn on. However, the backlight will work (for as long as it's plugged in; the backlight will turn back off after about 30 seconds if I unplug it). I've taken off the back panel to have a look at the battery. It seems fine: the positive and negative terminals read ~4.10V, and like I said, the backlight works. I've also tried all of the standard reset things such as holding the power button for 20-30 seconds, holding both the power and the N button for 20-30 seconds, leaving the battery unplugged for a while then trying to charge it, trying to charge it for a long period of time (about 6-8 hours).
In any case, nothing I've tried has worked, and I'm starting to get frustrated. The other two times this has happened, I could just return it and get a new one, but now that that warranty's gone, I'd have to buy a new one, which I'm not really all that willing to do.
If anyone has any ideas or insight, I'd be very grateful. Thank you in advance.
A voltmeter on the battery with no load might be a red herring.
A 100 ohm to 1K should be enough of a load.
A Nook without a battery will refuse to boot, however it will pop up in bootloader mode for a bit.
If you just plug in a USB cable does it popup on your PC "New device found"?
This thread might be of interest: http://forum.xda-developers.com/showthread.php?t=2559915
You can probably skip to the end.

Rooted now frozen in Installing Screen. Cannot restart.

Few weeks ago I found wife's old NST (non-glowlight model) in working order and decided to root it. Rooted it, played around with it. Wasnt too impressed, so just threw some ebooks for my kid to read while on vacation. Left it on my desk for a few weeks as I got busy with work. Today I picked it up as my son's vacation is next week and it's frozen on the "Installing... A new software update is being installed This will take a few minutes" screen.
I mean I googled for several hours, the hold the power button for 20 sec method....the hold the power and the "n" button method, I charged it, indicator light is green. I even opened it up and pulled the battery cable..... NOTHING WORKS...]
Please help. So weird...it was working fine and now frozen.
KEVIN88GT said:
Few weeks ago I found wife's old NST (non-glowlight model) in working order and decided to root it. Rooted it, played around with it. Wasnt too impressed, so just threw some ebooks for my kid to read while on vacation. Left it on my desk for a few weeks as I got busy with work. Today I picked it up as my son's vacation is next week and it's frozen on the "Installing... A new software update is being installed This will take a few minutes" screen.
I mean I googled for several hours, the hold the power button for 20 sec method....the hold the power and the "n" button method, I charged it, indicator light is green. I even opened it up and pulled the battery cable..... NOTHING WORKS...]
Please help. So weird...it was working fine and now frozen.
Click to expand...
Click to collapse
The real question is whether it is actually still on or off. What happens when you connect it to a PC via USB?
nmyshkin said:
The real question is whether it is actually still on or off. What happens when you connect it to a PC via USB?
Click to expand...
Click to collapse
Only the green charging light goes on. I do not hear the little sound it should make when making a successful USB connection.
KEVIN88GT said:
Only the green charging light goes on. I do not hear the little sound it should make when making a successful USB connection.
Click to expand...
Click to collapse
And I guess the drives don't mount successfully. Well, disconnecting the battery should certainly turn it off. If reconnecting makes it start spontaneously (should not), you could prepare a Nook Manager sdcard and insert it before reconnecting the battery. But this sort of sounds like the ability to boot is lost. Hmmm. I'll have to think about it.
unfortunately disconnecting the battery does not appear to do anything... screen continues to show that 'Installing... " screen. Hoping to get this thing figured out with someone's help
KEVIN88GT said:
unfortunately disconnecting the battery does not appear to do anything... screen continues to show that 'Installing... " screen. Hoping to get this thing figured out with someone's help
Click to expand...
Click to collapse
E-ink screens stay the same unless there is a new powered input so it could simply be off, having run the battery down completely during an update (maybe Wi-Fi was left on? That would run down the battery for sure). So if all of this happened during an OTA update, it could be really messed up
When my NST is off, plugging in the power pack turns it on. Initially the LED is green and then changes to orange as charging begins. I'm assuming nothing happens when you do the same. If the OS is scrambled from losing power during an update it may not be able to boot. You didn't say how you rooted. If you used Nook Manager you could try putting in that card and then connecting to the power pack, hoping for a boot from the SD card. If you got that far you could try a factory reset.
My power button is sometimes really cranky and a few times I've run through my entire stock of words that do not come from children's books trying to get the device to turn on. So you might try, but if it's really off the power pack should turn it on.
Edit: Take a look at this: https://forum.xda-developers.com/showthread.php?t=1813384
nmyshkin said:
E-ink screens stay the same unless there is a new powered input so it could simply be off, having run the battery down completely during an update (maybe Wi-Fi was left on? That would run down the battery for sure). So if all of this happened during an OTA update, it could be really messed up
When my NST is off, plugging in the power pack turns it on. Initially the LED is green and then changes to orange as charging begins. I'm assuming nothing happens when you do the same. If the OS is scrambled from losing power during an update it may not be able to boot. You didn't say how you rooted. If you used Nook Manager you could try putting in that card and then connecting to the power pack, hoping for a boot from the SD card. If you got that far you could try a factory reset.
My power button is sometimes really cranky and a few times I've run through my entire stock of words that do not come from children's books trying to get the device to turn on. So you might try, but if it's really off the power pack should turn it on.
Edit: Take a look at this: https://forum.xda-developers.com/showthread.php?t=1813384
Click to expand...
Click to collapse
When I plug in the power cable the light just becomes green it never (not even for a split second) turns orange. Yes, I'm rooted using nook manager. I just suck my Nook Manager SD card in the nook but nothing happens. I'm not sure what you mean by using the power button, in my original post I mentioned I tried the power button with no luck. What do you mean by power pack?
KEVIN88GT said:
When I plug in the power cable the light just becomes green it never (not even for a split second) turns orange. Yes, I'm rooted using nook manager. I just suck my Nook Manager SD card in the nook but nothing happens. I'm not sure what you mean by using the power button, in my original post I mentioned I tried the power button with no luck. What do you mean by power pack?
Click to expand...
Click to collapse
Power pack = charger.
So if the Nook is actually off, attaching the charger with the NM card inserted should make it boot. Did you try the procedure in the link above?
Just tried the procedure of unplugging the battery, holding the white power button for 30 secs, then connecting battery and connecting to charger. There is a split second orange light and then green the first time i plug it in....subsequent plugging results in always green....the issue with the frozen screen on "Installing" remains. Tried the holding x 20 secs method to promt a restart....nothing.... what else can I do?
KEVIN88GT said:
Just tried the procedure of unplugging the battery, holding the white power button for 30 secs, then connecting battery and connecting to charger. There is a split second orange light and then green the first time i plug it in....subsequent plugging results in always green....the issue with the frozen screen on "Installing" remains. Tried the holding x 20 secs method to promt a restart....nothing.... what else can I do?
Click to expand...
Click to collapse
If the battery is actually "dead" (not impossible on these old devices), the NST will not start, even if plugged in. Do you have a voltmeter of some sort to check the battery? If it's actually charged, it should show a solid voltage. If not, that may be the issue. If the battery is actually charged then there's a pretty serious issue that can't be fixed without access to the OS by ADB, or the ability to boot from the SD card. Beyond my "pay grade", at any rate, I'm sorry to say. There are batteries available online but the price may not make sense.
I don't think it's a battery issue. I had another NST with a good battery but a bad screen (lines all across screen) . I fully charged it using the bad screen reader and used the battery from it for the frozen nook... no luck.. oh well... I guess this is a paperweight now... thanks for your help everyone.

Categories

Resources