Database Users

Manually install the OTA update (2.1-update1) (stock/non-rooted)

Dont see this posted before...Mods please merge with any existing thread as you see fit.
If youre like me and want to install the update RIGHT NOW, then there are instructions at:
http://androidnetwork.org/forum/viewtopic.php?f=62&t=209
Download this file:
[link removed. please follow the original link above]
Then save on to your sd card, not in any folders, and rename it update.zip (windows users just rename it update, the .zip will come by itself)
1) Turn off your phone.
2) Turn on by holding down Power and the Trackball
3)Select Bootloader (Selection instructions on the top of screen)
4)Select recovery
5)An Android-Bot will come standing next to an open box
6)Press down Power and Volume Up
7)Select apply update.zip
8) Enjoy!
Click to expand...
Click to collapse
+
Only thing differnet was that on step 5, I got the android robot standing next to an "Exclamation mark in a triangle" (caution) icon. Simply pressed Power and Volume Up and got the option to install the update. click on update.zip. The phone will restart once and you will see the android outside a box, dont press anything.
Installed fine.]
Heres a thread in the Dev section:
http://forum.xda-developers.com/showthread.php?t=627533
Test results:
-Found that the total internal (app) memory is still 196MB and RAM is still 212MB, makes sense as the kernel is still .29, Have to wait for the next update I guess.
-No problems with any existing apps. (I did an Astro backup earlier anyway). Phone works fine too. (ATT EDGE)
-Multi touch works fine in the Maps app
-Looks like the Launcher2 FC bug is fixed, I could not reproduce the bug. (does not mean I'm leaving Home++ though )
Code:
Firmware version: 2.1-update1
Baseband version: 32.24.00.22U_4.03.00.21_2
Kernel Version: 2.6.29.01117-g4bc62c2
Build Number: ERE27

Thank You! Worked perfectly!

Worked great, thanks a lot! Does anyone know where to find the full changelog of this update? I can't seem to find one for the life of me. :s Thanks.

I didn't find one either.

Signature Verification Failed
I have a rooted Nexus One but no custom ROM installed on it. I pushed the Cyanogen Browser to gain Multi-Touch before the update came out. I downloaded the correct file and changed the name to update.zip on the top level of my SD card. I go into the booloader, then go to recovery, i get the android standing next to the exclamation mark and hit the buttom combination required. I select the update through SD card option and it starts then gives me a "signature verification failed" message. Any clue as to what I could do to apply the update?

ChrisM0678 said:
I have a rooted Nexus One but no custom ROM installed on it. I pushed the Cyanogen Browser to gain Multi-Touch before the update came out. I downloaded the correct file and changed the name to update.zip on the top level of my SD card. I go into the booloader, then go to recovery, i get the android standing next to the exclamation mark and hit the buttom combination required. I select the update through SD card option and it starts then gives me a "signature verification failed" message. Any clue as to what I could do to apply the update?
Click to expand...
Click to collapse
There are many threads in the dev section dealing with rooted phones.
http://forum.xda-developers.com/forumdisplay.php?f=559
I've updated this topic title to indicate its for stock ROMS only.

I get the same error with a brand new phone.
britoso said:
There are many threads in the dev section dealing with rooted phones.
http://forum.xda-developers.com/forumdisplay.php?f=559
I've updated this topic title to indicate its for stock ROMS only.
Click to expand...
Click to collapse
You seemed to indicate that his phone was rooted because he got that error. I have the same exact error and my phone is hours old with no root. Any suggestions?
Thanks

I have the same error, I can't seem to get the update installed.

alphonz said:
I have the same error, I can't seem to get the update installed.
Click to expand...
Click to collapse
Did you get the file from http://androidnetwork.org/forum/viewtopic.php?f=62&t=209 ?
Thats the one that I used.

[Question] how to unroot/restore

Hello,
I recently bought a nexus one from Craigslist. I thought it hadn't been tampered with but it turns out that it is rooted. I read you can tell its rooted when theres an open lock underneath the nexus sign when loading it. I don't know how he rooted but its preventing me from updating to the pinch and zoom capabilities. Always get (status 7) error. So I want to unroot the phone, update it then perhaps later root it. Is there a way I can unroot it with a Mac?
Thanks for the help!
Extra info about my phone (if it makes a difference)
Firmware version
2.1
Baseband version
32.19.00.16U_4.02.02.14
Kernel version
2.6.29-gad36b87
[email protected] #1
Build Number
ERD79

It's rooted without an unlocked bootloader? I doubt that, or maybe you have the only one in existence.
You can always just flash this:
http://www.mediafire.com/file/hy2yj42my3i/gapps-passion-ERE36B-2-signed.zip
in recovery and you'll get the multitouch update.

mortzz said:
It's rooted without an unlocked bootloader? I doubt that, or maybe you have the only one in existence.
You can always just flash this:
http://www.mediafire.com/file/hy2yj42my3i/gapps-passion-ERE36B-2-signed.zip
in recovery and you'll get the multitouch update.
Click to expand...
Click to collapse
Dude did you not read his first post? It has an OPEN lock. There is a way you can get the update. Man

Extra info about my phone (if it makes a difference)
Firmware version
2.1
Baseband version
32.19.00.16U_4.02.02.14
Kernel version
2.6.29-gad36b87
[email protected] #1
Build Number
ERD79

change your thread title. Its seriously misleading....[HOW TO] is for threads TEACHING how and not for questions or requests.

shonanthebarbarianTP2 said:
Dude did you not read his first post? It has an OPEN lock. There is a way you can get the update. Man
Click to expand...
Click to collapse
How do I update it then? I have always gotten (status 7) error. Better yet how do I unroot it? Any ideas?

As of right now, theres no way to unroot a phone. But if I were you, id consider upgrading it to CyanogenMod (search in nexus one development for it) that enables the multi-touch capabilities.

Its not possible
The best you could do is this, http://forum.xda-developers.com/showthread.php?t=614850
But anyway, why unroot, a rooted phone is much better
How about you look around the site and see wah u can actually do with your phone now

Just look for modaco's 1.7 , download it. Put your phone into recovery by powering down then hold volume down, down while holding that down press n hold power button. A white screen should come up. Leave it be until the green lettering disappears. Then press volume down to navigate to "recovery". Once in recovery use trackball to navigate to USB toggle . Click on it via trackball. Now plug ur phone into your comp via micro USB cable. Go to "my computer" on ur comp. Double click removable disk to open ur SD card. Delete everything from ur SD. Go to where u saved modacos 1.7 drag it to your empty SD card. Now click ur track ball to disable USB connection. Unplug your phone. Go to wipe. Click on it with ur track ball. Now click wipe data. Let it do its thing. Then wipe dalvik cache. Let it do its thing. After that push volume down to get back to ur menu. Go to flash update. Click on it and click on the zip you just put on ur Sd card. Let it do its thing and you're done.

1. Download a ROM of your choice, and then load it on to your SD card in the root directory.
2. Shut the phone off.
3. Hold down the volume down button, and hit + hold the power button at the same time.
4. Continue holding until the phone boots up
5. Scroll down to recovery by hitting the volume down button once.
6. Press the power button once.
7. Scroll down with the scrollball to Wipe
8. Wipe device/factory reset
9. Wipe cache
10. Click the volume down again
11. Scroll to Flash update/zip
12. Scroll to the ROM you downloaded and loaded to your zip, and then click
13. Click the trackball again to accept.
Now, you really just have to make sure the ROM you downloaded has the pinch to zoom, which most have. I don't believe you'll lose root, but you should at least gain the features you're looking for.

Your Nexus One is unlocked, not rooted. There is difference.

Thanks everyone for the help! I ended up needing to install the Amon RA recovery image and then installed the MoDaCo ROM. Works good but I read that Cyanogen is better with better features. I think I will now install the Cyanogen ROM. Not sure what he means by updating the radio if needed though. My radio is RADIO-4.02.02.14
If anyone knows if this is ok then I would appreciate it, I will try to research and see if it's ok too.
Thanks again!

Remember to do a nandroid backup in case you either screws something up or you wish to go back to your previous Rom (saves time and headache).

As far as i know updating the radio is optional, you just download it, nandroid backup, update like a rom, and reboot, IMPORTANT ON REBOOT IT WILL GO TO A LOADING SCREEN WHERE IT UPDATES THE RADIO DO NOT TOUCH ANYTHING OR PULL BATTERY OR YOU MAY BRICK YOUR PHONE-FOR REAL. With that said after the radio loads it will take you back to recovery, then nandroid again if you want(never hurts), wipe and flash cyanogens rom then the gapps add on and then reboot and youre good to go.

I just download all the files but I noticed that the radio is a .img file
Not sure how I can install it... any suggestions?

[HOWTO] Flawless bell update

WELCOME
to the WINDOWS Bell Atrix 0.37.4 update guide on how to go from 2.2.1 to 2.2.2! (without problems )
===================================================================================================================================================
WARNING
Do not attempt any of these steps if you are on an international firmware. You will probably brick your phone. This guide was made to help people who are having trouble updating from 0.37.4 to the new bell 2.2.2.
Bell users:
Please note that flashing files to your phone and modifying system contents can brick your phone. However, the method I am sharing worked flawlessly for myself and others.
Before beginning:
You need root access on your phone. If you are not sure what root access is, you shouldn't be having problems updating, because you wouldn't have modified system files. Regardless, here is a thread on how to root a bell atrix.
Guide:
Step 1:
Download Titanium Backup from android marketplace, and back up all of your apps and games. This is necessary only if you want to have an easy reinstall of most of your apps and games, as we will be wiping data off of the phone. (if you have another backup program, it should work just fine. Make sure it saves the backup to a folder that you can copy onto your computer)
Step 2:
Remove the external microsd card from your phone (if you have one). This is simply for safety purposes, as we don't want any data being wiped off of this (we don't need the microsd any time during the process).
Now, copy (or cut) all of the data from your internal storage to your computer, just in case, and we are about to wipe data off of your phone.
Step 3:
Format your phone. This can be done two different ways.
The first method is the simplest:
Menu -> Settings -> Privacy -> Factory Data Reset.
The second method (if for some reason you can't do the first) is:
Turn off your phone. Turn it back on while holding the volume down key. It will show the word FastBoot. Keep pressing the volume down key until you reach android recovery. Press the volume up key. Wait patiently. Once a little man appears, there should be a menu. If there isn't, press both the bottom left and bottom right corners of the screen simultaneously. That should bring up the menu. (give it a few tries, it takes me 8-10 lol). From this menu, press volume down until you get to wipe data, then press ok on the bottom left corner (give this a few tries too).
Step 4:
Your phone should now be acting like you just bought it. It should, upon reboot, prompt you to enter your country.. etc. Make sure you either use your existing motoblur account, or create a new one. It is just important for you to have a blur account for the update process (my phone gave me hell when I didn't have one). Do what is necessary to get your phone up and running again.
Step 5:
This is where the fun begins. Reroot your phone usinggladroot(or any other root method you know how to use). Download Superuser, install it, then download Root Checker from android marketplace to confirm root access. Whenever a Superuser popup comes up, confirm / say yes (and make sure the remember box is checked).
Once you have confirmed root access, proceed to the next step.
Step 6:
Download Tenfar's CWM recovery, and install the apk on your phone. Follow the instructions inside of the app to install recovery and enable recovery mode.
Step 7:
Download these two files, and put them in the root of your internal storage. (By root, I mean in the very first directory, ie. F:/put file here)
http://dl.dropbox.com/u/23800522/Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip
http://dl.dropbox.com/u/23800522/Blur_Version.0.37.4.MB860.BellMobility.en.CA.crc
Step 8:
We are now ready to start fixing up the phone, and preparing it for the update.
First of all, we need to make sure ADB (the program we will be using on our computer) has root access on our atrix when it is plugged into our computer via usb.
Before plugging in your atrix via usb, enable USB debugging via:
Menu-> Settings-> Applications -> Development -> Check USB Debugging.
Now plug the atrix into your computer, and set the USB connection to: None. Check to make sure USB Debugging is in your notification bar.
Download these files onto your computer if you do not have the adb files yet. Extract the files preferably into the root of your hard drive (ie C:/ ) is just makes things easier this way.
Now open up command prompt.
If it is not in the directory where the adb.exe file is, you will need to type:
cd C:/
into command prompt. This says "change directory to C:/" (or wherever you put the files, could be cd C:/Program Files/ could be anywhere. wherever you extracted them to.)
Once in this new directory, type this into command prompt and press enter:
adb devices
If a device pops up (mine said TY290380 or something like that) that means that it recognizes your atrix. That is great news. We now have to enable ADB root access on the phone.
If nothing pops up, or it says some sort of error, you are not in the directory where adb.exe is located. Navigate to the proper directory.
Now, type the following command:
adb shell
One of two things can happen here. It will either create a new line with a $, or a new like with a #.
blah blah C:/ adb shell
$
or
blah blah C:/ adb shell
#
If a $ came up, you need to prepare a command BUT DONT PRESS ENTER YET. Type in "su", but dont hit enter. Now go to your phone and unlock your screen. After you unlock your screen and can see your homepages, press enter on your keyboard doing the "su" command. Now look at your phone. A superuser request should appear. Hit yes, and make sure that "remember" is checked. If not, it is ok, as long as the su command went through on your screen. it should now show a # on your command line.
For those of you who had a # on your command line, type in shsu and hit enter, then type in su and hit enter (just to play it safe ).
We are now ready to flash the first files to our device. You can close the command window.
Step 9:
Download this file. It is the original unmodified system partitions and files (thank you NFHimself). Extract the file using winrar or 7zip.
Change your USB connection on your phone to: Mass Storage, wait a minute or so, and then put the extracted file "mmcblk0p12.bin" in your internal storage on your phone. (ie. F:/ )
Step 10:
Dismount the phone from your usb devices via windows hardware manager. Unplug your atrix from your usb. Reconnect it, and choose connection type: none. Make sure usb debugging is in your notification bar.
Now, re-open command prompt. Renavigate to the directory where your adb files are located using the "cd C:/" command (or wherever your files are). Once there, perform "adb devices". Make sure a device is there. Next, perform the command "adb shell". You should have a #. Type in shsu, hit enter, now su, hit enter (just to be sure).
Now copy this command and hit enter (you have to right click paste into cmd prompt):
dd if=/sdcard/mmcblk0p12.bin of=/dev/block/mmcblk0p12
This will begin the flashing process, which will restore all stock system partitions allowing us to update properly. However, it's not over yet .
Mine took a few mins, do not panic. Simply wait for it to say "Complete" in x amount of seconds or whatever. Your phone may crash, but it should boot up fine (if not, that is why we have installed Tenfar's CWM )
After it is complete, turn off your phone. Keep it connected to the computer.
Step 11:
Boot up your phone holding volume down. Navigate to android recovery using volume down. Volume up. Open up the menu with the bottom left bottom right press. Go to clear cache. Press OK. Now reboot your phone.
You can now update through settings and it should work properly. If not, respond in here and I will guide you a few more codes, but it should work.
The phone should now boot up, and it should be running android version 2.2.2.
Regard this thread for how to root the new bell update. Just a heads up, it wiped my internal storage and SD card, so remove and backup that stuff. Lol. But it did root.
Now reinstall your backup program, and get your phone going again!
If you have any questions or problems please post them here and I will reply ASAP, personal messages are hard to keep track of. Thanks again to NFHimself for supplying files and code.
Cheers!
PS: I just finished exams, yay!?
Please say if you notice anything misspelled, etc. Gratzi

You are the f***in man for posting this. Thumbs up to NFHimself for his contribution too!

Links
Crud, your links for the files in dropbox aren't working.

Silvercloak5098 said:
Crud, your links for the files in dropbox aren't working.
Click to expand...
Click to collapse
You sure? I clicked them both myself to make sure they work.
How don't they work?
FYI: I'm reuploading them to megaupload as we speak anyways

IrshaadH said:
You are the f***in man for posting this. Thumbs up to NFHimself for his contribution too!
Click to expand...
Click to collapse
When I got my phone to update to 2.2.2 it felt amazing.
I just wanted to spread the love

Thank you so much!! You don't know how frustrated I've been all day! The only problem I had was that my root was gone after I flashed it, but I just updated through settings and it worked flawlessly

tyrkk said:
Thank you so much!! You don't know how frustrated I've been all day! The only problem I had was that my root was gone after I flashed it, but I just updated through settings and it worked flawlessly
Click to expand...
Click to collapse
NP! Just glad you got your update.
I changed the steps so that the last step is simply updating via settings. If that doesn't work for people I will help them out in this thread with the more complicated coding way.
Cheers!

Couldn't step ten be used to revert to stock from an international sbf?
Sent from my MB860 using XDA App

Ok..quick question. You said not to install for those using any international version. I have run the Telstra sbf at one point..as well as had the Greyblur rom on. Before installing the Telstra I had made a backup using CWM, and a few days ago I had to revert to my old backup due to a rogue app. In my About phone, it tells me my System version is Blur_Vision.0.37.4MB860.BellMobility.en.CA with a Build number of OLYA_U4_0.37.4.
Would this be still safe for me to do seeing's how it seems i'm back to my "Bell sbf" or is there still going to be some Telstra files in there that could cause me some problems?

I made it through to the end of step 10 and the phone was looking good. Then when I shut off the phone and tried to go into Android Recovery, it keeps going to the triangle symbol and I have to reboot.
After a couple times of that I decided to check Android Recovery from inside the app list and it said I no longer have root access.
Any ideas what to do now??

Rickroller said:
Ok..quick question. You said not to install for those using any international version. I have run the Telstra sbf at one point..as well as had the Greyblur rom on. Before installing the Telstra I had made a backup using CWM, and a few days ago I had to revert to my old backup due to a rogue app. In my About phone, it tells me my System version is Blur_Vision.0.37.4MB860.BellMobility.en.CA with a Build number of OLYA_U4_0.37.4.
Would this be still safe for me to do seeing's how it seems i'm back to my "Bell sbf" or is there still going to be some Telstra files in there that could cause me some problems?
Click to expand...
Click to collapse
Depends on whether or not you're still on the telestra framework. If you're confident with your ability to recover from a potential brick via early usb enumeration id go for it.

bdking2 said:
I made it through to the end of step 10 and the phone was looking good. Then when I shut off the phone and tried to go into Android Recovery, it keeps going to the triangle symbol and I have to reboot.
After a couple times of that I decided to check Android Recovery from inside the app list and it said I no longer have root access.
Any ideas what to do now??
Click to expand...
Click to collapse
Edit: See my lower post first, then this one
Open up the menu in android recovery by tapping both the bottom left corner and bottom right corner of the screen at the same time.
It should show you an error if there was one.
Does the phone boot fine?
You should lose root access. When you flash the .bin it restores your bell to stock like you got it from the store. That allows you to update.
Most importantly open up the recovery menu when you see the triangle by tapping the bottom left and right corners simultaneously. Itll take a few tries.

IrshaadH said:
Couldn't step ten be used to revert to stock from an international sbf?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
No, since you are on an international framework it will probably brick your phone.
That .bin file contains the system partitions from the stock bell framework.
If you want to try go ahead but I think the odds are against you

bdking2 said:
I made it through to the end of step 10 and the phone was looking good. Then when I shut off the phone and tried to go into Android Recovery, it keeps going to the triangle symbol and I have to reboot.
After a couple times of that I decided to check Android Recovery from inside the app list and it said I no longer have root access.
Any ideas what to do now??
Click to expand...
Click to collapse
Bdking I have another idea. if you can boot up your phone, re-root it using any normal methods, then install CWM. Boot into CWM recovery mode and clear the cache from there. Then do step 11.
Chances are the update file is hanging out in your cache so when the android recovery sees that it immediately tries to install the messed up package.
Thats why you should clear cache on CWm because it wont try to install anything automatically from the cache. Then do step 11.
Hope it helps, Mag.

No my phone boots fine. And now I can get into android recovery to clear cache and have done so. But before I read your response I rooted my phone again.
Should I just restart everything?

bdking2 said:
No my phone boots fine. And now I can get into android recovery to clear cache and have done so. But before I read your response I rooted my phone again.
Should I just restart everything?
Click to expand...
Click to collapse
No you should be good to go try to update via settings.
You flashed the bin right?
If so you're good to go

I flashed the bin for sure. But wasn't sure about the process because I rooted again.

bdking2 said:
I flashed the bin for sure. But wasn't sure about the process because I rooted again.
Click to expand...
Click to collapse
Root shouldnt change anything only deodexing/webtop mod/ theming should mess it up.
If you flashed the bin go for it. Worst thing that can happen is that the update fails.
In that case, redo step 10, then do step 11.

Magnetox said:
No, since you are on an international framework it will probably brick your phone.
That .bin file contains the system partitions from the stock bell framework.
If you want to try go ahead but I think the odds are against you
Click to expand...
Click to collapse
So, there is absolutely NO WAY I can get back to the Bell framework from 2.1.1 without an actual Bell sbf?

IrshaadH said:
So, there is absolutely NO WAY I can get back to the Bell framework from 2.1.1 without an actual Bell sbf?
Click to expand...
Click to collapse
NFHimself knows a way.
But hes a master of code.
Pm him, he might be able to help you.
He was happy he got his bell 2.2.2 thoough. so im assuming it wasnt easy.

[Q] Cant get 3.1

24 hours with the tab...
I am new to the tab and i am not going to root yet. I want to use it as ASUS intends it to be, for right now.
Anyways, it came 3.0.1, and i when i ask it to update it tells me no new updates are available. Battery is fully charged, wifi signal is great.
Anything else i can do?
PS- I am saving a review until i get the update, but typing this message was at best frustrating.
Cheers!

Im trying to figure this out as well. Im planning on calling Asus today and ask for help I'll share how to do it as soon ask figure it out
Sent from my SGH-T959 using XDA App

Agnog said:
Anyways, it came 3.0.1, and i when i ask it to update it tells me no new updates are available. Battery is fully charged, wifi signal is great.
Anything else i can do?
Click to expand...
Click to collapse
Download the update manually from the Asus website, save it in your TF's internal memory, then try going to the update page and it should detect the file and allow you to install it. If it doesn't come up straightaway try rebooting your TF and try the update page again.

jonitfcfan said:
Download the update manually from the Asus website, save it in your TF's internal memory, then try going to the update page and it should detect the file and allow you to install it. If it doesn't come up straightaway try rebooting your TF and try the update page again.
Click to expand...
Click to collapse
Something isn't right because your tablet should update automatically once it gets a connection.

I think you an install the update manually.
1)Download the firmware from Asus, unzip it and put the contents for the ASUS/Updates/ folder on the root directory of the external SD card. Rename it to EP101_SDUPDATE.zip
2) Boot into recovery - hold volume down, press power button. Your TF will turn on and say it's going to blow up in 5 secs. Press volume up within 5 secs. Don't delay because you could wipe your data if you press volume up too late.
3) get some popcorn and watch the magic happen. Afterwards, it will reboot, you'll see a progress bar to indicate that it is flashing. Then it should boot into sweet honeycomb.
4) Delete or rename the EP101_SDUPDATE.zip for something else, or else it will flash every time you go to stock recovery.
Edit: I think the firmware has to match your current build, i.E., US, TW, WW. Check your build info to be sure.

gee one said:
I think you an install the update manually.
1)Download the firmware from Asus, unzip it and put the contents for the ASUS/Updates/ folder on the root directory of the external SD card. Rename it to EP101_SDUPDATE.zip
2) Boot into recovery - hold volume down, press power button. Your TF will turn on and say it's going to blow up in 5 secs. Press volume up within 5 secs. Don't delay because you could wipe your data if you press volume up too late.
3) get some popcorn and watch the magic happen. Afterwards, it will reboot, you'll see a progress bar to indicate that it is flashing. Then it should boot into sweet honeycomb.
4) Delete or rename the EP101_SDUPDATE.zip for something else, or else it will flash every time you go to stock recovery.
Edit: I think the firmware has to match your current build, i.E., US, TW, WW. Check your build info to be sure.
Click to expand...
Click to collapse
I am following your instructions and all I am getting is the Android with the exclamation mark symbol when I reboot from recovery.

Agnog said:
I am following your instructions and all I am getting is the Android with the exclamation mark symbol when I reboot from recovery.
Click to expand...
Click to collapse
Nevermind, I got it. I was being dumb.
3.1 goodness.

Agnog said:
Nevermind, I got it. I was being dumb.
3.1 goodness.
Click to expand...
Click to collapse
What you do to get it to work im having the same issue with the exclamation mark symbol.........
EDIT
....ok i took a shot and did EXACTLY (read carefully) what was in the directions... i removed all the folders that were part of the udpate ( ASUS\UPDATE) I put the .zip on the root of the sdmicro... this contradicts what the SOP says to do with the manual update but hey it works ...thanks
EDIT EDIT
This should be added to the STICKIY as a way to update!!

gremmie said:
What you do to get it to work im having the same issue with the exclamation mark symbol.........
EDIT
....ok i took a shot and did EXACTLY (read carefully) what was in the directions... i removed all the folders that were part of the udpate ( ASUS\UPDATE) I put the .zip on the root of the sdmicro... this contradicts what the SOP says to do with the manual update but hey it works ...thanks
EDIT EDIT
This should be added to the STICKIY as a way to update!!
Click to expand...
Click to collapse
Agreed. I misunderstood the directions at first - my fault for being a noob. I ended up using the full SD slot on my dock, but the math was the same.
HUGE thanks to gee one.

Root & Install CM7 on Mytouch 3G Slide 2.2.1

Rooting & Flashing To Stock 2.1
1. Download the files below
2. Copy "ESPRIMG.zip" to the root of your sd card on your phone
3. Extract "Super-Click 2.3.1" & "Mt3s Rooter" to their own folders on your computer
4. Navigate to settings on your phone. Select "Connect to Pc", choose "Charge Only"
5. Navigate to "Applications" then select "Devolpment" and make sure "USB Debugging" is on
6. Run the .exe files within each of the folders (Run .exe as Admin if your using Vista/Win7)
7. In SuperOneClick, select "Shell Root", wait for it to finish rooting
8. In the mt3gs rooter program, click on "Root Me"
You will need to turn on the phones WIFI within 30 seconds so be quick and then wait for it to restart.
9. Once your phone is rebooted it should be in BOOTLOADER Mode. Press volume down to select fastboot (If it doesnt show fastboot then select Bootloader and it will then show the menu with fastboot).
Once fastboot is highlighted, press the power button once.
It will check for ESPRIMG.zip and should show a progress bar in the top right.
After waiting a while it will ask you if you want to update, press volume up.
When it is finished it will ask to reboot, press volume up to do so. (If phone says on Mytouch circle for too long just take out the battery and restart)
If you want to put CM7 on your phone do instructions below.
Installing CM7 with Google Apps
1. Rename "update-cm-7.0.3-Slide-signed.zip" to "update.zip"
3. Copy "Update" & "gapps-gb-20110613-signed" to the root of your phone
4. Turn your phone off. Once off press and hold the volume down and power button at the same time.
5. It will look for the ESPRIMG again, after its done you will see the menu. Highlight "Recovery" and press the power button
6. A Red Triangle screen will show. Press volume up and power, then select "Wipe data/factory reset" then done do the same with "Wipe cache partition
7. After all that you will select "Apply sdcard:update.zip"
8. Select reboot system now
9. Once phone is restarted go into the app drawer and open ROM Manager.
10. Scroll down and select "Download Rom" then select install and then select the option it shows. It should say that Clockwork Mod installed.
11. Now select "Install Rom from SD Card" and select "gapps-gb-20110613-signed" and press OK twice.
It will reboot and show it installing.
Once done it will reboot again and your done. (Btw it will have you sign in and such)
DOWNLOAD THESE FILES:
SuperOneClick 2.3.1-
http://depositfiles.com/files/n0dcxce3t
Mt3s Rooter-
http://depositfiles.com/files/hn8tn6141
or
http://www.mediafire.com/?7yq3wo5yl3odz4k
HTC Espresso Stock Rom (ESPRIMG for 2.1 stock rom)-
http://www.4shared.com/file/OsmF_ZD7/ESPRIMG.html
CM7 Rom for Mytouch 3G Slide-
http://download.cyanogenmod.com/get/update-cm-7.0.3-Slide-signed.zip
Google Apps-
http://cmw.22aaf3.com/gapps/gapps-gb-20110613-signed.zip
----------------------------------------------------------------------------
MyTouch 3G Slide Drivers (These Might Help With Failed ADB Connectivity)
http://secure.htc.com/US/support/t-mobile-mytouch-3g-slide/downloads/
http://developer.android.com/sdk/win-usb.html
I pieced this together so I don't take full cred. I know this works because I did it to my phone as I typed it
If this works make sure to post it. Also remember to give thanks. This was not easy to figure out.

problem
what if it says cannot roll back bootloader while espring is updated it says bypassed

It bypasses normally

Why not use ClockWorkMod recovery as update.zip and use that to flash roms and things from there?

Just didn't wanna do it that way

thank you so much for posting this i have been trying to gain root ever since i got my phone which was last year thank you

I cant flash update.zip it keeps saying cant mount sd and when i reboot it says i dont have an sd card i need help im stuck with 2.1 and cant load a rom

not working
Didnt work for me.
superoneclick worked saying i had temporary adb root, then i would run mts rooter and it seems like that when the cmd prompt comes up that it doesnt work.
on the first part it said
"cd: can't cd to /sqlite_stmt_journals"
then after I turn wifi on and the cmd prompt goes again I get:
"./exploid not found" and " secretlol not found"
any help?

one small hiccup
Used these instructions to root a friend's phone last night. There was one deviation we had to deal with:
5. It will look for the ESPRIMG again, after its done you will see the menu. Highlight "Recovery" and press the power button
Click to expand...
Click to collapse
While we could see the menu the phone only gave us the choice to run update (YES) or reboot (NO). Recovery was inaccessible. We ran the update (with the bootloader bypassed) then when asked to reboot we chose (NO) and then could select RECOVERY and follow the steps above.
Yes, we did repeat the UPDATE.ZIP process but this time it did not skip Bootloader. Soon CM7 was up and running.
Hope this helps and thanks for the great instructions.

i need some help my says i dont have sd card when it boots up .Also it wont let me apply the update.zip .it says cant mount /dev/block/mmcblk0
cant find /sdcard/update.zip
Ive already reloaded ESPRIMG aboput 15 times im stuck with a useless phone please help
Also my pc wont recognize my phone so i cant use adb or anything

angelo420 said:
I cant flash update.zip it keeps saying cant mount sd and when i reboot it says i dont have an sd card i need help im stuck with 2.1 and cant load a rom
Click to expand...
Click to collapse
Some sd cards work better than others. Sandisk with a little 4 work great. Try to reformat it with a pc and I think it needs to be Fat32
jasonftfw said:
Didnt work for me.
superoneclick worked saying i had temporary adb root, then i would run mts rooter and it seems like that when the cmd prompt comes up that it doesnt work.
on the first part it said
"cd: can't cd to /sqlite_stmt_journals"
then after I turn wifi on and the cmd prompt goes again I get:
"./exploid not found" and " secretlol not found"
any help?
Click to expand...
Click to collapse
Your pc is not detecting your phone. Try installing HTC Sync from the Mytouch 3Gs support page. Also make sure to run it as an administrator while being logged in on a admin account

I actually rooted mine while placing the phone in SYNC Mode after removing the sync program and pressing back button on phone to have it stop looking for SYNC...Just remove SYNC program from the computer not the drivers for the phone to be recognized.

Your pc is not detecting your phone. Try installing HTC Sync from the Mytouch 3Gs support page. Also make sure to run it as an administrator while being logged in on a admin account
Click to expand...
Click to collapse
I downloaded the htc sync software from htc dot com /us/support/t-mobile-mytouch-3g-slide/downloads/ (xda's settings stop me from submitting a link as this is my first post), I then tried to rerun the SuperOneClick and it failed saying "ADB server is incorrect version" or something similar. I copied the ADB.exe from the HTC Sync app directory into the SuperOneClick, and wham bam it worked. Of course the MT3Rooter failed with the same error, so I repeated the copy and I had root.
Thanks for your help everyone, it is very appreciated by this sorta geek.
PS: As a software geek and a 42 year old jerk, it hurts my heart that XDA has to run such nasty anti-spam settings just to keep crap off this forum. Ends up penalizing the users with good intentions. I totally see why it has to be done, and I support the effort, just is sad that it has to be this way.

how do you achieve s-off though? does downgrading, also downgrade your bootloader?
the goldcard app is not working, the site is down to generate keys.

Insanityrains: I have two stupid questions. Is there something I'm missing here? You don't have consecutive numbers for your instructions. Should I follow them in the order you have posted or in the order of the numbers?
Dumb question 2: Where is the download link for the ESPRIMG.zip file?
Thanks for your instructions! I hope it works for me.
UPDATE
I followed the steps to the letter. It worked seamlessly. Thanks insanityrains for putting all this together and the developer who actually figured this out!! However, few things I had to learn by doing it over and over again:
The first part worked awesome! (i.e. rooting and installing 2.1). It will keep saying there were errors and stuff but keep doing what insanityrains says to do.
The second part (installing CM7 with google apps was the hurdle for me): Follow his numbering in post #1 (once again, I'm refering to the second part) to understand what I'm saying below.
Before you begin, you don't need the ESPRIMG file anymore once you have rooted and installed 2.1 (the first part). So delete that file from the root of your SD card. By doing this, you can skip the annoying wait as it tries to reinstall 2.1 on your phone. Now for the two mistakes I did.
1. The first step was a silly mistake, but very much possible for someone to commit. Just rename the file "update" and dont add ".zip" like I did. Everytime I try installing the ROM it kept saying "cannot locate update.zip". I was scratching my head for a few times before I realized the mistake
2. Step #5. It will search for the ESPRIMG file and it is not going to find that. Select "recovery" then
For noobs, dont freak out while doing it. It was scary for me to root the phone. But once I did it fine, it was fun!

so in order to install roms you have to rename them to update zips?

anybody even here anymore?
theres too many outdated rooting guides on here. i already know i cannot achieve s-off now that we accepted the OTA. i already tried to root and it went fine but the clockwork recovery will not work. also when i boot into the 2.1 rom that i downgraded to i see there is no superuser app but it appears i am rooted because most root apps work minus wireless tether. i just want root and to run a semi stock non cm7 type rooted rom. is this possible with s-on or not?
if so can someone point me in the right direction please?

Worked!!!
Thanks insanityrains. Followed the steps and it worked. I would echo comments re: Menu choice for "Recovery" (see updates with fezmonger and ganjagarn).
Again - thanks!

fixxxer2008 said:
anybody even here anymore?
theres too many outdated rooting guides on here. i already know i cannot achieve s-off now that we accepted the OTA. i already tried to root and it went fine but the clockwork recovery will not work. also when i boot into the 2.1 rom that i downgraded to i see there is no superuser app but it appears i am rooted because most root apps work minus wireless tether. i just want root and to run a semi stock non cm7 type rooted rom. is this possible with s-on or not?
if so can someone point me in the right direction please?
Click to expand...
Click to collapse
I thought someone on here said that you could use clockwork mod but you probably have to put it in, i can't help since I rooted my phone with the original method that was much easier.
Have you tried installing rom manager and letting it flash clockworkmod recovery?

jacewt said:
I thought someone on here said that you could use clockwork mod but you probably have to put it in, i can't help since I rooted my phone with the original method that was much easier.
Have you tried installing rom manager and letting it flash clockworkmod recovery?
Click to expand...
Click to collapse
i was working on it for a client, i gave up. thanks anyways.