I was trying to install Tiamat for my Xoom running version 3.2 as per the instructions on the following post:
http://forum.xda-developers.com/showthread.php?t=978013
I was able to install ClockworkMod, put the Tiamat 2.0 zip on my SD card, boot into recovery mode, select the ZIP file for Tiamat, and it claims to install. However, once I reboot, nothing appears to have changed. My kernel version still remains the same. Am I doing something wrong? Is there a step I am missing?
Any help would be appreciated. Thanks!
mediumgrade said:
I was trying to install Tiamat for my Xoom running version 3.2 as per the instructions on the following post:
http://forum.xda-developers.com/showthread.php?t=978013
I was able to install ClockworkMod, put the Tiamat 2.0 zip on my SD card, boot into recovery mode, select the ZIP file for Tiamat, and it claims to install. However, once I reboot, nothing appears to have changed. My kernel version still remains the same. Am I doing something wrong? Is there a step I am missing?
Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
Is your Xoom rooted?
What version of CWM recovery did you install?
You can certainly install the Tiamat Katana kernel or the Tiamat Manta Ray Rom (which also contains the kernel) but you may need some additional steps, depending on your current situation.
I am having the exact same issue, except im on 3.1 and tiamat 1.44
Everything appears to install fine, but when i boot into the system I do not see that the kernel has changed....
Do you really need an external microSDHC card to make this work? I thought the latest CWM let you install from the internal media?
HALP!
You really need a micro sdcard, and you need CWM recovery 3.2.0.0 R4c version.
Can the SDCARD have other data on it or just the ZIP file?
any will do.
Sent from my Xoom using Tapatalk
techs1200 said:
Do you really need an external microSDHC card to make this work? I thought the latest CWM let you install from the internal media?
Click to expand...
Click to collapse
I have the same question. I returned my 2 week old SGT10.1 for a Xoom yesterday, and I miss being able to flash roms from internal media.
I have CWM 4.0, it LOOKS just like the SGT version: is there a reason why I shouldn't try to flash Tiamet Manta Ray from the internal storage? Surely someone has tried...
32gb WiFi US rooted OTA 3.2, CWM 4.0.0.4
mediumgrade said:
Can the SDCARD have other data on it or just the ZIP file?
Click to expand...
Click to collapse
It can have other data on it. Just make sure you have enough room for the zip file and a nandroid backup if you plan to make one.
mediumgrade said:
I was trying to install Tiamat for my Xoom running version 3.2 as per the instructions on the following post:I I
http://forum.xda-developers.com/showthread.php?t=978013
I was able to install ClockworkMod, put the Tiamat 2.0 zip on my SD card, boot into recovery mode, select the ZIP file for Tiamat, and it claims to install. However, once I reboot, nothing appears to have changed. My kernel version still remains the same. Am I doing something wrong? Is there a step I am
Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
I had the same problem but I think I figured it out. I had been trying to flash the overclocked version. As a shot in the dark I downloaded the stock Tiamat kernel and tried the process again. BINGO! ! I was then able to overclock to 1.7 using setCPU.
Okay, I found part of the problem...
Turns out, the Xoom is mounting its internal storage at /mnt/sdcard and the actual external SD Card to /mnt/external1. From the CWM recovery, I can't seem to navigate to /mnt/external1. What should I do?
mediumgrade said:
Okay, I found part of the problem...
Turns out, the Xoom is mounting its internal storage at /mnt/sdcard and the actual external SD Card to /mnt/external1. From the CWM recovery, I can't seem to navigate to /mnt/external1. What should I do?
Click to expand...
Click to collapse
I suspect that it's your version of CWM Recovery that's to blame. If you have Version 4.0.0.x you have the wrong version...it doesn't see your external card and you can't flash. If this is the case, you must download and install the Tiamat 3.2.0.0. R4c version, available in the Development section.
okantomi said:
I suspect that it's your version of CWM Recovery that's to blame. If you have Version 4.0.0.x you have the wrong version...it doesn't see your external card and you can't flash. If this is the case, you must download and install the Tiamat 3.2.0.0. R4c version, available in the Development section.
Click to expand...
Click to collapse
I was able to flash without seeing the external flash card. I booted up my Xoom,
connected the USB cable from my laptop which automounts the internal storage which is what is found at the /mnt/sdcard mount point. I copied the stock CPU .zip file to the base directory. Disconnected, rebooted into recovery. Once there I chose "Install zip from sdcard". Then chose "choose zip from sdcard". Then scrolled down to the bottom of the directory listing where I found my zip file and chose that zip file. Then I chose "Yes" to install and it finished from there. FYI I am running CWM v4.0.0.4
tl_driver said:
I was able to flash without seeing the external flash card. I booted up my Xoom,
connected the USB cable from my laptop which automounts the internal storage which is what is found at the /mnt/sdcard mount point. I copied the stock CPU .zip file to the base directory. Disconnected, rebooted into recovery. Once there I chose "Install zip from sdcard". Then chose "choose zip from sdcard". Then scrolled down to the bottom of the directory listing where I found my zip file and chose that zip file. Then I chose "Yes" to install and it finished from there. FYI I am running CWM v4.0.0.4
Click to expand...
Click to collapse
It's your choice, but the developers recommend flashing from and backing up to an external sdcard. If you do a nandroid backup with your current recovery version where will the backup be stored? At mnt/sdcard, your internal storage. What if you can't boot one day and have to end up wiping all of your user data before you could restore? If you backup to the external sdcard, that wouldn't be affected by a wipe. Anyway, I guess if you don't have/can't afford an sdcard it's a way to flash from recovery, but I think that version is more for phones which have only one sdcard--external--and only have a tiny amount of internal storage.
mediumgrade said:
Okay, I found part of the problem...
Turns out, the Xoom is mounting its internal storage at /mnt/sdcard and the actual external SD Card to /mnt/external1. From the CWM recovery, I can't seem to navigate to /mnt/external1. What should I do?
Click to expand...
Click to collapse
Those are just mountpoints, they have no bearing on how they present the contents.
CWM and Tiamat just have different mountpoints to the same device, the contents are the same.
If you put a file in /mnt/external1 you will see it in CWM under /mnt/sdcard, exactly the same.
Going back to Tiamat 3.2.0.0. R4c from CWM 4.0.0.4
Hi, somehow i mistakenly update CWM to 4.0.0.4. How can I back to CWM 3.2.0.0 R4c? Any advised much appreciated.
EDIT : Sorry, managed to back to 3.2.0.0 R4c by flashing again.
okantomi said:
It's your choice, but the developers recommend flashing from and backing up to an external sdcard. If you do a nandroid backup with your current recovery version where will the backup be stored? At mnt/sdcard, your internal storage. What if you can't boot one day and have to end up wiping all of your user data before you could restore? If you backup to the external sdcard, that wouldn't be affected by a wipe. Anyway, I guess if you don't have/can't afford an sdcard it's a way to flash from recovery, but I think that version is more for phones which have only one sdcard--external--and only have a tiny amount of internal storage.
Click to expand...
Click to collapse
You make a very valid point, I guess in my excitement to update I did not think about that.. Thank you..
penjejakawan said:
Hi, somehow i mistakenly update CWM to 4.0.0.4. How can I back to CWM 3.2.0.0 R4c? Any advised much appreciated.
EDIT : Sorry, managed to back to 3.2.0.0 R4c by flashing again.
Click to expand...
Click to collapse
Would I be able to flash back to 3.2.0.0 R4c (from 4.0.0.4) even though I am already running the Tiamat kernel? I am guessing yes but I just want to be sure before I break something.
tl_driver said:
Would I be able to flash back to 3.2.0.0 R4c (from 4.0.0.4) even though I am already running the Tiamat kernel? I am guessing yes but I just want to be sure before I break something.
Click to expand...
Click to collapse
Yes, you can do it. ;^ )
Is there any way for me to change back the battery icons back to stock for tiamat manta-ray 2.0... thanks in advanced..
Sent from my Xoom using Tapatalk
you would have to look for an icon pack for the battery pictures. usually comes in a zip that you just flash in CWM. dont know if you have already but make sure you hit the thanks button for okantomi! do it now!
Related
Update fixed the SD was broken I don't exactly know why but it explains everything so thanks for all your help and sorry for not being very
clear.
Hi I'm having issues with clockworkmod.
See the problem is while trying to flash cyanogen mod I was getting the endless loop so I kept
at it until I managed to flash it. The problem is I flashed Cm6.1.0 so easy fix right? Well I thought so too until clockworkmod wouldn't find the zip. So I tried nandroid and it again couldn't find any zip so I checked the partitions menu and clockworkmod had mounted the
Sd card and the cache. So I unmounted both and still nothing so I looked at the setting's again and it remounts the cache and sometimes the Sd card. Well my problem is worsened by
the fact that the version of cyanogen mod that did flash doesn't have the market or flash.
Any help will be welcome. HTC aria.
place name here- said:
Hi I'm having issues with clockworkmod.
See the problem is while trying to flash cyanogen mod I was getting the endless loop so I kept
at it until I managed to flash it. The problem is I flashed Cm6.1.0 so easy fix right? Well I thought so too until clockworkmod wouldn't find the zip. So I tried nandroid and it again couldn't find any zip so I checked the partitions menu and clockworkmod had mounted the
Sd card and the cache. So I unmounted both and still nothing so I looked at the setting's again and it remounts the cache and sometimes the Sd card. Well my problem is worsened by
the fact that the version of cyanogen mod that did flash doesn't have the market or flash.
Any help will be welcome. HTC aria.
Click to expand...
Click to collapse
With CM 6, the Market is in the GoogleApps zip which must be installed after the ROM.
Also Flash 10.x does not run on the Aria; the CPU is not supported by Adobe.
Well clockworkmod won't find any zip not even nandroid and so my problem deepens so now can't get the market crap.
place name here- said:
Well clockworkmod won't find any zip not even nandroid and so my problem deepens so now can't get the market crap.
Click to expand...
Click to collapse
Some of your terminology in your post is very confusing. First of all, ClockworkMod will only find ZIP files that are copied to the root directory of your SD card. If you copied them to a folder on your SD card, CWM will not find them.
Second, Nandroid is a backup and restore utility and it does not use ZIP files. It creates backup folders on the SD card under /clockworkmod/backup and contains image files of the various partitions on your phone.
So what is the exact state of your phone? You stated that you have flashed CM 6.1? If you boot your phone normally, does CM 6 start up and are you able to use your phone? In order to install gapps.zip file to get the Market app, copy the gapps.zip file to the root of your SD card and see if ClockworkMod can install it. BTW, in CWM you are select "install zip from sdcard" and then "choose zip from sdcard", right?
tpbklake said:
First of all, ClockworkMod will only find ZIP files that are copied to the root directory of your SD card. If you copied them to a folder on your SD card, CWM will not find them.
Click to expand...
Click to collapse
Not true, you can install ZIP files from any directory.
drumist said:
Not true, you can install ZIP files from any directory.
Click to expand...
Click to collapse
+1. I keep all my zips in a subdirectory on my sdcard.
Sent from my cm6.1 Aria using XDA App
drumist said:
Not true, you can install ZIP files from any directory.
Click to expand...
Click to collapse
CallMeAria said:
+1. I keep all my zips in a subdirectory on my sdcard.
Sent from my cm6.1 Aria using XDA App
Click to expand...
Click to collapse
Thanks for correcting my misinformation. I guess the root location only applies to "update.zip", right?
Yup. And it actually must be named "update.zip"
Oh crap I just formated the boot partition and now my phone won't boot at all!
It still won't find any zip. What now? Is there any way to restore clockworkmod?
place name here- said:
Oh crap I just formated the boot partition and now my phone won't boot at all!
It still won't find any zip. What now? Is there any way to restore clockworkmod?
Click to expand...
Click to collapse
Mount sdcard in clockwork and transfer from PC then reboot recovery and choose the zip
Sent from my Liberty running CM7
that's my problem i can load many zip files but it won't find any of them.
it just keep's saying no files found.
place name here- said:
that's my problem i can load many zip files but it won't find any of them.
it just keep's saying no files found.
Click to expand...
Click to collapse
Are you copying the zip files from your PC to the sd card? Have you tried downloading a ROM zip file directly to your SD card using your phone's browser?
I have exactly the same problem...Clockwork will not see any .zip files....even tried mounting usb storage from cwm, it mounts and the zips are there, yet it can not find any of them when i try to find them (all are in the root of the sdcard)...any ideas?
So if you pick "choose zip from SD" you can't manually pick a zip?
Sent from my Liberty using XDA App
Found a solution:
1. Get SD card formatter from HERE
2. Plugin your phone (as USB drive), start up the application and format the card (default options selected) NOTE: backup your SD card to your PC first (obviously)
3. Unplug the phone (or put it into charge mod, whatever)
4. The phone should now try (and fail) to mount the card...go to the SD options and format the card using the phone function
The .zip files should now be visible in ClockworkMod Recovery (it worked for me and a few others as far as i know)
i have tried everything to fix my nook fist formating wont work then installing nook 1.0.1 wont install then 8 boot wont restore nook just gives me error. right now im on the n screen running 1.0.0 i think
fist formating wont work
Click to expand...
Click to collapse
You should never fist your Nook.
Seriously, you have to provide info on your setup. CM7 version, CWR version, SD or eMMC install, etc.....
Without knowing what you were initially trying to fix or what materials you have on hand, I would say make an up-to-date CWM card:
eyeballer said:
Download 1gb CWM 3.2.0.1 sdcard image from here. MD5 of .zip: 1319739d33642ed860e8044c3d55aa56. (I made this based on work in this thread. credit: to cmstlist and DizzyDen, and kevank for hosting). You really only need the 1gb image for this guide, no matter what the size of your card is. A smaller image will burn faster, and when you're done with the guide you can reformat the card anyway.
Extract the clockworkmod .img (if you can't open the file use 7zip)and burn to sdcard using win32diskimager (free) or winimage (shareware). These apps will need to be "run as administrator." If you're not sure how to do this see step 3 here. ***Some internal laptop/desktop readers will not work to do this, you may need an external USB reader if you run into problems.***
Click to expand...
Click to collapse
Then install a CWM-flashable stock zip:
Taosaur said:
Put update-nc-stock-1.3.zip (do not unzip!) on your SD card.
Insert card and power on NC.
From CWM main menu, in "mounts and storage," format system, data and cache.
From CWM main menu, "install zip from sdcard," and "choose zip from sdcard."
Choose the 1.3-keep-CWM file.
From CWM main menu, "reboot system now."
Click to expand...
Click to collapse
hey did this but get error on format.
Taosaur said:
Without knowing what you were initially trying to fix or what materials you have on hand, I would say make an up-to-date CWM card:
Then install a CWM-flashable stock zip:
Click to expand...
Click to collapse
hey thanx did this but dose not format any of them but loaded the zip file and it took it but stuck on n and tried the 8 fails boots and it always fails to restore
I'm up to the part where I browse the SD card for the ZIP file.
Clockwork claims to be showing my SD Card, but it's actually showing my XOOM's internal memory.
What can I do?
I fixed it. It appears to have been an issue with the root.
It somehow became unrooted. Using the universal method, I fixed it and now CWM sees the SD card.
you might want to change you recovery to tiamats or rogues recovery, they are more suitable for the xoom.
just download either in the .zip file and write the zip in cwm recovery.
I like rogues because it allows you to mount a usb drive.
also stay away from rom manager- great for phones but not the xoom
Good Evening Everyone,
I am opening up this thread because I am not able to use the Backup Current Rom feature in my Nook Color using ext3 or ext4 file system on my micro-sd card.
Is there any way to fix this problem without using fat32?
This is what happen:
I select Backup Current Rom
The nook restarts
Waiting for SD card to mount
Can't mount SD card...
Bye and thank you very much in advance
Nook Color using Cyanogen mod 7
ClockworkMod recovery 3.2.0.1
nookUser said:
Good Evening Everyone,
I am opening up this thread because I am not able to use the Backup Current Rom feature in my Nook Color using ext3 or ext4 file system on my micro-sd card.
Is there any way to fix this problem without using fat32?
This is what happen:
I select Backup Current Rom
The nook restarts
Waiting for SD card to mount
Can't mount SD card...
Bye and thank you very much in advance
Nook Color using Cyanogen mod 7
ClockworkMod recovery 3.2.0.1
Click to expand...
Click to collapse
This sounds like you are running CM7 off of SD... you DO NOT use CWM for SD installs.
If you are not running off of SD... then I'd make sure you have the current version of CWM (3.2.0.1) and try mounting the SD from the menu's before trying anything else.
Hi, First of all, thanks for answering to my inquiry
Yes I run CM7 on from the internal memory of the Nook Color and yes, I am running CWM (3.2.0.1).
If I mount the sd card from the menu settings->storage->Mount SD Card, the sd card is mounted without any problems... The problem is when I try to Backup Current Rom
I tried also to reboot manually in recovery mood and do:
mounts and storage
mount /sdcard and I get Error mounting /sdcard!
nookUser said:
This is what happen:
I select Backup Current Rom
The nook restarts
Waiting for SD card to mount
Can't mount SD card...
Nook Color using Cyanogen mod 7
ClockworkMod recovery 3.2.0.1
Click to expand...
Click to collapse
Assuming you have a good flashable CwMR 3.2.01 uSD.
Plug it into the NC, when powering up, it should be automatically booted into CwM Recovery. From there, do the Backup.
No need to mount SD card. In fact, don't know why you would do that?
votinh said:
Assuming you have a good flashable CwMR 3.2.01 uSD.
Plug it into the NC, when powering up, it should be automatically booted into CwM Recovery. From there, do the Backup.
No need to mount SD card. In fact, don't know why you would do that?
Click to expand...
Click to collapse
1- How do I know if I have a good flashable CwMR 3.2.01 uSD?
I have the one that comes with the CM7 updated to 3.2.0.1.
2- I went on ROM Manager ->Backup Current ROM but still, when I am in the recovery mode and I click on
backup and restore -> backup
I get the message Can't mount /sdcard
I have also tried to turn on the nook and enter into the recovery mode by pressing the n key but still, I get Can't mount /sdcard when I try to backup my ROM.
What do I do wrong?
P.S. In case my CwMR is not good, how do I remove it?
nookUser said:
1- How do I know if I have a good flashable CwMR 3.2.01 uSD?
I have the one that comes with the CM7 updated to 3.2.0.1.
Click to expand...
Click to collapse
Ehhhh, honestly, no clue what you're trying to say.
Anyway, let's start from scratch.
Firstly, pls let us know your current system such ROM version, where it boots from, .....
Secondly, what are you trying to do? Make a backup?
votinh said:
Firstly, pls let us know your current system such ROM version
Click to expand...
Click to collapse
The ROM version is CyanogenMod-7-11162011-NIGHTLY-encore.
I got it in download.cyanogenmod.com/?device=encore
votinh said:
where it boots from, .....
Click to expand...
Click to collapse
It boots from eMMC (I think... I installed the ROM in the Internal Memory)
votinh said:
Secondly, what are you trying to do? Make a backup?
Click to expand...
Click to collapse
I am trying to make a backup on my micro-sd that has an ext4 file system
Bye and thank you very much.
Clear!
Now, if you did install ROM into eMMC yourself, then I assume you know how to create a flashable CwMR uSD and it is good.
Assuming the flashable uSD is fresh and good.
1. Insert the uSD into NC. Power it up. It will boot into recovery AUTOMATICALLY.
2. From the CwMR menu, using volume up/down button to to Advanced, then Backup. Let it run until finishes. Theoretically, the entire backup .zip file should be around 100MB.
3. Remove the uSD off NC.
4. The backup .zip file should probably be in the "clockworkmod" folder under ROOT. Transfer it to PC or other space to save.
That's it.
There is absolutely no need dealing with "mount SD" or "ext3" or "ext4"
Hi All,
I want to root my HD nook today, if anyone can guide me to the appropriate ROM/Image/GAAPS/anything else I need will be appreciated.
I want to install the Hybrid version on my nook - my software version is 2.0.6.
I am planning to follow the instructions from http://forum.xda-developers.com/showthread.php?p=37578234 (Diogenes5 post). He provides links to which roms but don't know which ones to download.
Any other assistance will be greatly appreciated.
Thanks in advance.
bonline said:
Hi All,
I want to root my HD nook today, if anyone can guide me to the appropriate ROM/Image/GAAPS/anything else I need will be appreciated.
I want to install the Hybrid version on my nook - my software version is 2.0.6.
I am planning to follow the instructions from http://forum.xda-developers.com/showthread.php?p=37578234 (Diogenes5 post). He provides links to which roms but don't know which ones to download.
Any other assistance will be greatly appreciated.
Thanks in advance.
Click to expand...
Click to collapse
You want CM10.1 by bokbokan. They are the only ones that work on his Hybrid. And get the latest.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
You want CM10.1 by bokbokan. They are the only ones that work on his Hybrid. And get the latest.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Leapinlar - This is the bokbokan thread - http://forum.xda-developers.com/showthread.php?t=2063968
Bokbokan has three sections to his post - CWM bootable image, CM10.1 CWM flashable rom, and CM10 CWM flashable ROM - so which sections files do I need? Also any recommendation for instructions using Windows?
Thanks.
bonline said:
Leapinlar - This is the bokbokan thread - http://forum.xda-developers.com/showthread.php?t=2063968
Bokbokan has three sections to his post - CWM bootable image, CM10.1 CWM flashable rom, and CM10 CWM flashable ROM - so which sections files do I need? Also any recommendation for instructions using Windows?
Thanks.
Click to expand...
Click to collapse
CM10.1 CWM flashable ROM. And use the Diogenes instructions you quoted earlier.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
CM10.1 CWM flashable ROM. And use the Diogenes instructions you quoted earlier.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Leapinlar - question - I did instructions 1-3 and the nook recognizes the SD in step 3. How do I get the rom on the SD per step 4? Can I connect the nook to the PC via the USB cable?
Additionally - what does Optional: 8) Install one of leapinlar's fixes from this post: http://forum.xda-developers.com/show...2097731&page=4
enable the tablet to do and where do I get the files and instructions if I wanted to enable this as well.
Thanks!
bonline said:
Leapinlar - question - I did instructions 1-3 and the nook recognizes the SD in step 3. How do I get the rom on the SD per step 4? Can I connect the nook to the PC via the USB cable?
Additionally - what does Optional: 8) Install one of leapinlar's fixes from this post: http://forum.xda-developers.com/show...2097731&page=4
enable the tablet to do and where do I get the files and instructions if I wanted to enable this as well.
Thanks!
Click to expand...
Click to collapse
bump
bonline said:
Leapinlar - question - I did instructions 1-3 and the nook recognizes the SD in step 3. How do I get the rom on the SD per step 4? Can I connect the nook to the PC via the USB cable?
Additionally - what does Optional: 8) Install one of leapinlar's fixes from this post: http://forum.xda-developers.com/show...2097731&page=4
enable the tablet to do and where do I get the files and instructions if I wanted to enable this as well.
Thanks!
Click to expand...
Click to collapse
You can either use stock to download the CM10.1 zip directly to the internal SD or connect the USB cable with stock booted and use the cable to copy the file from your PC to the internal SD.
Once the file is on the internal SD, you can boot to the SD again and use the "install zip from SD/choose zip from internal memory" option.
And my files are attached to the post he quoted (my HD+ Hybrid thread linked in my signature) and instructions are there to. I have a section there devoted to the HD Hybrid.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
You can either use stock to download the CM10.1 zip directly to the internal SD or connect the USB cable with stock booted and use the cable to copy the file from your PC to the internal SD.
Once the file is on the internal SD, you can boot to the SD again and use the "install zip from SD/choose zip from internal memory" option.
And my files are attached to the post he quoted (my HD+ Hybrid thread linked in my signature) and instructions are there to. I have a section there devoted to the HD Hybrid.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
I am really sorry to be so dense about this. I copied the ROM and the GAAPS to the Internal SD, I didn't put it inside any particular folder. Now when I boot the nook back up, choosing install zip from SD/Internal memory - it asks choose which zip to apply - i do not see the ROM zip and the GAAPS zip.
Did I need to extract the Flashable ROM zip and copy those files to the internal SD or the copying the entire folder is fine?
What am I missing....
bonline said:
I am really sorry to be so dense about this. I copied the ROM and the GAAPS to the Internal SD, I didn't put it inside any particular folder. Now when I boot the nook back up, choosing install zip from SD/Internal memory - it asks choose which zip to apply - i do not see the ROM zip and the GAAPS zip.
Did I need to extract the Flashable ROM zip and copy those files to the internal SD or the copying the entire folder is fine?
What am I missing....
Click to expand...
Click to collapse
I don't remember exactly how bokbokan did his CWM internal memory. You may have to look in a folder named /media.
And keep the zips intact.
Sent from my Nook HD+ running CM10 on Hybrid SD
I'll attempt to describe this to you as easy as possible, and hopefully you should have your Nook ready in minutes. It doesn't take too much effort or time; mainly waiting for install requires time, other than that it's a quick process. It's not difficult either; the more you believe it is difficult, the more it will be.
I'll start from the beginning; and you go can go from there.
1. Download the latest ROM for your Nook HD (this is a hummingbird variation) from: http://forum.xda-developers.com/showthread.php?t=2063968
The latest version is, as of today (CTRL + F in your browser, then paste the first line of the following quote to find it easily):
cm-10.1-20130418-UNOFFICIAL-hummingbird *** NEWEST ***
MD5: 26dcb32d40fdcf7779ac0d34843c4404
Click to expand...
Click to collapse
2. Now you need to download the latest ClockWorkMod Recovery for your Nook (to install the ROM). Once you download it, you must also download the latest update file. Download CWM & the Update from: http://forum.xda-developers.com/showthread.php?t=2097731
The latest version of CWM + the update, as of today:
sdcard-cwm-hummingbird-hybridv2.zip
Click to expand...
Click to collapse
update-20130221.zip
Click to expand...
Click to collapse
Download both these from the link on step two (above; in this paragraph).
3. You optionally can install Gapps too; which I would recommend to access all of Google Services, including the Play Store. So download it from here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
4. Let's get started! First, if you have a Windows machine, download WinDiskReader32 (click). This is to burn the CWM .img to your SD card. Now plug in your SD card into your PC. Extract the CWM files, it was downloaded in step 2. You should have a single file with the extension .img. Load up WinDiskImager, select the CWM file, and also select the drive which your SD card is inserted into. Make sure you do not overwrite any other drive (i.e. C drive), as you will wipe out your whole PC OS. Then hit the "Write" button on WinDiskImager. Your SD card will now have CWM installed (and your SD will be partitioned. This is fine, and you should only see around ~160MB on your SD card; again this is perfectly normal).
5. After burning CWM to your SD card, extract the update file (also downloaded in step two) directly into your SD card. So basically, extract the update file into your SD card, and it will ask if you want to overwrite any existing files, confirm this.
6. Connect your Nook to your PC, whilst on the stock B&N ROM and in MTP mode (if you don't know what MTP is, most likely you haven't changed it, so your can ignore it). Once plugged in. Transfer the ROM file you downloaded in step 1, and Gapps which you downloaded in step 3 to your Nook's "Internal Storage". Transfer the ROM & Gapps (DO NOT EXTRACT THESE FILES, JUST COPY THEM TO YOUR SD CARD) to your Nook HD's internal storage via PC. Once fully transferred, move onto the next step.
7. Turn your Nook off. Eject your SD card from your PC. Place the SD card into your Nook. Turn on your device. At this point, your Nook will constantly restart as it sets up your SD card (don't touch it at this point, let it do it's thing). After a while, you should be booted into CWM. This is when the process of setting up the SD card has been complete.
8. In CWM, select "install .zip from SD card", then select "install .zip from internal sd card". Locate and install the ROM. This may take some time. Once complete, locate and install the Gapps file.
9. This isn't mentioned in the original setup, or anywhere else, but I would recommend that you fix the permission of your Nook HD now, as a fresh install before you proceed to use it. Go to this thread: http://forum.xda-developers.com/showthread.php?t=2233688 and start from Section 5 on the link, once done, return to this thread, then move onto the next step here.
10. Optionally (if you don't want to install, skip to step 11), now you can install a patch by leapinlar. For example, if you boot into CyanogenMod, you cannot use your internal storage. You can only use your SD card. However, if you would like to use your internal storage when in CyanogenMod, install this fix by leapinlar:
NookHD-HDplus-Hybrid-SDSwap-for CM10-10.1-rev2-(03.09.13).zip
Click to expand...
Click to collapse
From: http://forum.xda-developers.com/showthread.php?p=38153094#post38153094 If you install this fix, your internal storage will be used instead of your SD card (this is a bonus for those who are using 2GB SD cards, since they're limited on storage). After this fix, all your apps and everything will treat the internal storage as it's default native storage space.
11. Go to the root menu on ClockWorkMod Recovery, and select "reboot system now". Your tablet will now reboot into CyanogenMod perfectly.
You are good to go. All the best.
leapinlar said:
I don't remember exactly how bokbokan did his CWM internal memory. You may have to look in a folder named /media.
And keep the zips intact.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
It is in Media - so I installed the ROM but my fat fingers clicked something else before I can wipe cache etc. I still need to install GAAPS and your files.
How do I get back to the menu structure that enables me to clear cashe and install from internal sd?
bonline said:
It is in Media - so I installed the ROM but my fat fingers clicked something else before I can wipe cache etc. I still need to install GAAPS and your files.
How do I get back to the menu structure that enables me to clear cashe and install from internal sd?
Click to expand...
Click to collapse
the power key is the back key.
Sent from my Nook HD+ running CM10 on Hybrid SD
bonline said:
How do I get back to the menu structure that enables me to clear cashe and install from internal sd?
Click to expand...
Click to collapse
Power Button: To go up one menu, for example if you go into "Advanced", to return to the original menu, you simple press the power key.
Volume Up/Down: These two keys are for navigation purposes, allowing you to scroll up or down the menu respectively. Use these keys to highlight your option.
Home/'n' Button: This is to select the current option, for example, if you're currently hovered over "Reboot system now", and press the 'n' key, your tablet would reboot.
Use the power button.
leapinlar said:
the power key is the back key.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
It installed CM, but I didn't Wipe cache and dalvik and then install GAAPS and then wipe cache and dalvik etc.
My Nook boots up into CM but now I want to get back into the menu that will enable me to wipe cache and install GAAPS etc.
bonline said:
It installed CM, but I didn't Wipe cache and dalvik and then install GAAPS and then wipe cache and dalvik etc.
My Nook boots up into CM but now I want to get back into the menu that will enable me to wipe cache and install GAAPS etc.
Click to expand...
Click to collapse
You mean once you have left CWM and booted to CM10, how do you get back to CWM recovery? Reboot and hold the n key. A boot menu will pop up. Follow the directions there to get to CWM recovery.
Sent from my Nook HD+ running CM10 on Hybrid SD
bonline said:
It installed CM, but I didn't Wipe cache and dalvik and then install GAAPS and then wipe cache and dalvik etc.
My Nook boots up into CM but now I want to get back into the menu that will enable me to wipe cache and install GAAPS etc.
Click to expand...
Click to collapse
Since you wiped it after installing Gapps, there's no need to do it again; as it won't make a difference. But if you want to, simply boot into recovery.
On a Nook HD, to boot into the recovery. Turn off your Nook, and using the boot menu select CWM. Or, if you prefer, follow the guide here from Step 3 to 5: http://forum.xda-developers.com/showthread.php?t=2233688
bonline said:
It installed CM, but I didn't Wipe cache and dalvik and then install GAAPS and then wipe cache and dalvik etc.
My Nook boots up into CM but now I want to get back into the menu that will enable me to wipe cache and install GAAPS etc.
Click to expand...
Click to collapse
HiddenG said:
Since you wiped it after installing Gapps, there's no need to do it again; as it won't make a difference. But if you want to, simply boot into recovery.
On a Nook HD, to boot into the recovery. Turn off your Nook, and using the boot menu select CWM. Or, if you prefer, follow the guide here from Step 3 to 5: http://forum.xda-developers.com/showthread.php?t=2233688
Click to expand...
Click to collapse
Thanks Leapinlar and HiddenG for all the help I was able to get it to work for me! Quick question, how do I get it to boot into stock and visaversa?
bonline said:
Its hanging at 99%
Click to expand...
Click to collapse
What is hanging at 99%? Stock? You should not be booting to stock, you should be booting to SD and selecting CWM recovery in the boot menu.
Sent from my Nook HD+ running CM10 on Hybrid SD
bonline said:
Thanks Leapinlar and HiddenG for all the help I was able to get it to work for me! Quick question, how do I get it to boot into stock and visaversa?
Click to expand...
Click to collapse
Use the boot menu to get to stock. To get to CM10 from rooted stock, install an app from Play Store named Quick Boot by Sirius Applications. You can use that to tell it to reboot. If you do not have stock rooted, you must power off and back on.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Use the boot menu to get to stock. To get to CM10 from rooted stock, install an app from Play Store named Quick Boot by Sirius Applications. You can use that to tell it to reboot. If you do not have stock rooted, you must power off and back on.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
I downloaded the app - when I go into bootloader from the app, the nook reboots and hangs at 99%.
I do believe I rooted the nook and installed CM10 because I was able to go to play store and download the app.