Database Users

How Can I update R150 ~?

i English very bad~ and
How Can i get R150 source to update~
now i get R149 .very smooth~....

wait and wait and wait

gut1983 said:
i English very bad~ and
How Can i get R150 source to update~
now i get R149 .very smooth~....
Click to expand...
Click to collapse
where did u get the r149 version pls

kira1511 said:
where did u get the r149 version pls
Click to expand...
Click to collapse
You Might Not Know, we all are using Release 134++ You can update to Revision r150
(The revision number is increased on bug-fixes and other patches.)
http://code.google.com/p/photon-android/source/list

15MA1L said:
You Might Not Know, we all are using Release 134++ You can update to Revision r150
(The revision number is increased on bug-fixes and other patches.)
Click to expand...
Click to collapse
thank you ,but how to update , i am new ; and i can't find how in that link

when one of the developers have posted a fix or update in the forum, you can download, try and give feedback, so that way you are always up to date, but also risk to experience the reality of the joke about Devolopment
follows: one bug fixed, but produced two new (joke, but it may happen sometimes)

for example for the r151 update , there is only code , so how can i download it and update , sorry i am noob
don't you have a tutorial on how to update?
and thx for your help

You do not need tutorial, read this thead from the beginning to the end and you will know how to update and perhaps much more
http://forum.xda-developers.com/showthread.php?t=1204203

kira1511 said:
for example for the r151 update , there is only code , so how can i download it and update , sorry i am noob
don't you have a tutorial on how to update?
and thx for your help
Click to expand...
Click to collapse
It needs to compile.
Here is already compiled r151 kernel and its modules.

DmK75 said:
It needs to compile.
Here is already compiled r151 kernel and its modules.
Click to expand...
Click to collapse
thank you very much , i update it , and it is more smooth

kira1511 said:
thank you very much , i update it , and it is more smooth
Click to expand...
Click to collapse
i also noticed seems power saving is better here

did the dev find a fix to the battery life , cause it can't use my android more then 1 day

DmK75 said:
It needs to compile.
Here is already compiled r151 kernel and its modules.
Click to expand...
Click to collapse
is this same update as munjeni's?

kiretocin said:
is this same update as munjeni's?
Click to expand...
Click to collapse
No, this kernel from googlecode sources:
http://code.google.com/p/photon-android/source/list
Munjeni updates from these sources:
https://gitorious.org/2-6-32-photon

kira1511 said:
did the dev find a fix to the battery life , cause it can't use my android more then 1 day
Click to expand...
Click to collapse
My phone after 36 hours - > battery 60% (small use - always in sleep mode, only receive call! Frequency range is from 122 to 804 mhz). I think power saving is bassed from what aplications you have installed and runing!

munjeni said:
My phone after 36 hours - > battery 60% (small use - always in sleep mode, only receive call! Frequency range is from 122 to 804 mhz). I think power saving is bassed from what aplications you have installed and runing!
Click to expand...
Click to collapse
omg , so should i turn off the wifi ? I can't use my phone more then 18 hours !

can someone please compile the new update r163 and give us the link
(i don't have linux)
and thank you again

Is there a "HowTo" somewhere how to compile the sources from code.google? Id' like to try that and lean more how it works .

michjosi said:
Is there a "HowTo" somewhere how to compile the sources from code.google? Id' like to try that and lean more how it works .
Click to expand...
Click to collapse
http://code.google.com/p/photon-android/wiki/GettingStartedWithTheKITCHEN

DmK75 said:
http://code.google.com/p/photon-android/wiki/GettingStartedWithTheKITCHEN
Click to expand...
Click to collapse
Good Job

Swiftdroid Sourcecode

Hey there everyone and especialy you mur4ik, have you already released or planning to realese Swiftdroids sourcecode ? for other developers updates ?

m4nu4l said:
Hey there everyone and especialy you mur4ik, have you already released or planning to realese Swiftdroids sourcecode ? for other developers updates ?
Click to expand...
Click to collapse
It would be good if he does. But there is other Cm7 source code for the GT540

airbus360 said:
It would be good if he does. But there is other Cm7 source code for the GT540
Click to expand...
Click to collapse
Where to download it??

airbus360 said:
But there is other Cm7 source code for the GT540
Click to expand...
Click to collapse
Yep but without Mr. Mur4ik's special fixes, if i good know.

wwenigma said:
Yep but without Mr. Mur4ik's special fixes, if i good know.
Click to expand...
Click to collapse
All you got to do is use his kernel. Check mikegapinski git or pcfighers git

Or check my new Cyanogenmod 7 thread it's in the startpost
Sent from my GT540 using Tapatalk

Twrp v2.3 for o1

here is twrp v2.3 for our o1
http://teamw.in/project/twrp2/73

x dira i think u tried so how was it

Did you tried?its working?

Am I just blind, or is there no download link?

sweetnsour said:
Am I just blind, or is there no download link?
Click to expand...
Click to collapse
tap the github thing

vikasb32 said:
Did you tried?its working?
Click to expand...
Click to collapse
actually i dont have my phone right now so ya i havent but u can
sorry i havent informed

androidisfuture said:
tap the github thing
Click to expand...
Click to collapse
Under what category is it? The only thing github related that I found is under source code
EDIT: Actually can you post the download link here?

> It needs to be compiled

https://github.com/TeamWin/Team-Win-Recovery-Project/archive/jb-wip.zip
one click download
reply soon sweetnsour

neko95 said:
> It needs to be compiled
Click to expand...
Click to collapse
androidisfuture said:
https://github.com/TeamWin/Team-Win-Recovery-Project/archive/jb-wip.zip
one click download
reply soon sweetnsour
Click to expand...
Click to collapse
Yeah, I thought it was a flashable zip
Maybe next week or so, I'll give it a shot, but no promises though since I have never compiled anything before

sweetnsour said:
Yeah, I thought it was a flashable zip
Maybe next week or so, I'll give it a shot, but no promises though since I have never compiled anything before
Click to expand...
Click to collapse
hey u can try its always first time i am also eagrr to use so start complining

I got 2.3.3.0 compiled for the p500. PM me if you'd like to test it.

cougarcougar said:
I got 2.3.3.0 compiled for the p500. PM me if you'd like to test it.
Click to expand...
Click to collapse
> if it works, you can share it and proper credits to teamwin.
Sent from my little fingers.. to your face using XDA app

neko95 said:
> if it works, you can share it and proper credits to teamwin.
Sent from my little fingers.. to your face using XDA app
Click to expand...
Click to collapse
ya u r right i just forgot

2.3.2 wouldn't restore backups, but now it's fixed in 2.3.3. It just needs a few things worked out before i release it.
Big issue is the jb api that TWRP 2.3 uses. Some older zip files like kernels or patches won't flash. You have to swap out the update-binary in those zips.

cougarcougar said:
2.3.2 wouldn't restore backups, but now it's fixed in 2.3.3. It just needs a few things worked out before i release it.
Big issue is the jb api that TWRP 2.3 uses. Some older zip files like kernels or patches won't flash. You have to swap out the update-binary in those zips.
Click to expand...
Click to collapse
> well that did turn off me, i'll stick on 2.2 if thats the case
Sent from my little fingers.. to your face using XDA app

Release it i am waiting for it.

@cougarcougar, if you are there, please check your PM. Successfully flashed TWRP 2.3 but there is a major issue with your zip file.

sweetnsour said:
@cougarcougar, if you are there, please check your PM. Successfully flashed TWRP 2.3 but there is a major issue with your zip file.
Click to expand...
Click to collapse
Can you share recovery.plz

sweetnsour said:
@cougarcougar, if you are there, please check your PM. Successfully flashed TWRP 2.3 but there is a major issue with your zip file.
Click to expand...
Click to collapse
whats the issue

FXP CM12

FXP CM12 Discussion Thread

FXP CM12 Released
Hey, guys, good news. Ubberlaggydarwin has done it again for our beloved XSP. FXP has released their first CM12 build for our XSP.
http://uploaded.net/file/ywu45pi9/from/4bbo69
Presently, we don't have any changelogs and bug list, but I'm downloading it and will inform you guys once get my hands on it.
Enjoys guys....

Hi guys anyone tried yet on a clean install bugs ?
And I cant seem to get to upload so anyone can mirror maybe media fire ?

Hello All, I'm uploading the ROM on mediafire. Once its done, I'll post the link.
The build seems to be very fluid. But the major problem is, my sim is not getting registered to the network.
Flashed Mr Steve's fix_hotspot_calls_sp_lp.zip but its not working. But on searching manual network, Its showing all the nearby networks but not getting registered even on manual selection.

FXP-cm-12-20150209-UNOFFICIAL-huashan mediafire link
mediafire link below:
https://www.mediafire.com/?h8q7otr8netie73

@Nathan rd suggested to flash baseband from stock rom and try... good a idea but my battery is drained so i cant do it for a while... can someone try that...?

soumyog said:
mediafire link below:
https://www.mediafire.com/?h8q7otr8netie73
Click to expand...
Click to collapse
I didn't try it yet but... have you tried typing su setenforce permissive on terminal, as older mrsteve555 build?
I know on gerrit selinux is permissive but...

From where did You get the original link??? I cant find any post by uberlaggy anywhere about this built...

nplezka said:
I didn't try it yet but... have you tried typing su setenforce permissive on terminal, as older mrsteve555 build?
I know on gerrit selinux is permissive but...
Click to expand...
Click to collapse
i tried that and nothing changed.... cm12 recognize sim, and nearby networks... but cant register to network...

nplezka said:
I didn't try it yet but... have you tried typing su setenforce permissive on terminal, as older mrsteve555 build?
I know on gerrit selinux is permissive but...
Click to expand...
Click to collapse
This was the last option for me, I've tried this as well, didn't work.

bharathulaganathan said:
From where did You get the original link??? I cant find any post by uberlaggy anywhere about this built...
Click to expand...
Click to collapse
+1 @Gara91 @soumyog

Gara91 said:
@Nathan rd suggested to flash baseband from stock rom and try... good a idea but my battery is drained so i cant do it for a while... can someone try that...?
Click to expand...
Click to collapse
Tried flashing the baseband by both flashtool and baseband fix. Didn't work.

Nathan rd said:
+1 @Gara91 @soumyog
Click to expand...
Click to collapse
Uberlaggy is Brinly Taylor, and he has been working on CM12 for our XSP. He's a member of FXP. So what's the conclusion???!!!
http://forum.xda-developers.com/showthread.php?t=2599650&page=273
The links have been removed.
Waiting for 10+ thanks to be eligible for posting in Development threads.

deleted

@Gara91 @soumyog could u guys take a logcat for the Sim. Do one on first boot. And then let's see one during automatic and manual search(registering included).

soumyog said:
Uberlaggy is Brinly Taylor, and he has been working on CM12 for our XSP. He's a member of FXP. So what's the conclusion???!!!
http://forum.xda-developers.com/showthread.php?t=2599650&page=273
The links have been removed.
Waiting for 10+ thanks to be eligible for posting in Development threads.
Click to expand...
Click to collapse
Don't do that. Devs create dev threads not you.

soumyog said:
mediafire link below:
https://www.mediafire.com/?h8q7otr8netie73
Click to expand...
Click to collapse
Have you tested it yet? If yes, then what is your experience like so far? Are there any noticeable bugs?

it's pretty smooth, and a lot new features added, like cm theme engine and all that stuff, but still couldn't figure out a way to get mobile network working.

Dark Passenger said:
@Gara91 @soumyog could u guys take a logcat for the Sim. Do one on first boot. And then let's see one during automatic and manual search(registering included).
Click to expand...
Click to collapse
never done this before (logcat) is there any tutorial???
edit: will learn how, and than post here...

Hey guys, do you know if we need to flash Gapps, or do they come within the FXP cm12 zip ???

How to install Cyanogenmod 12.1 on SM-G531H?

I'm compiled Cyanogenmod 12.1. It is starts, but stuck on Cyanogen boot logo. Maybe something missing? What can I do to start Cyanogenmod?

eyeless95 said:
I'm compiled Cyanogenmod 12.1. It is starts, but stuck on Cyanogen boot logo. Maybe something missing? What can I do to start Cyanogenmod?
Click to expand...
Click to collapse
Share logcat.
Via adb : adb logcat > logcat.txt , where logcat.txt - file with log

WinKarbik said:
Share logcat.
Via adb : adb logcat > logcat.txt , where logcat.txt - file with log
Click to expand...
Click to collapse
Now it is starting and working, but still doesn't work wi-fi, sound, modem, doesn't mounting internal and external storage...can you help me with it?

eyeless95 said:
Now it is starting and working, but still doesn't work wi-fi, sound, modem, doesn't mounting internal and external storage...can you help me with it?
Click to expand...
Click to collapse
I ll try help if you will share your device tree and logcat.

WinKarbik said:
I ll try help if you will share your device tree and logcat.
Click to expand...
Click to collapse
Okey, tommorow I will share device tree and logs

What about G530H ?
Can u port it to G530H XD

Soki99 said:
What about G530H ?
Can u port it to G530H XD
Click to expand...
Click to collapse
G530H is build on another platform, there's no way to porting, only build from sources.

eyeless95 said:
I'm compiled Cyanogenmod 12.1. It is starts, but stuck on Cyanogen boot logo. Maybe something missing? What can I do to start Cyanogenmod?
Click to expand...
Click to collapse
Try to recompile using this device tree it should be more complete then yours in github
https://github.com/Tonygris/android_device_samsung_grandprimeve3g

fedoud32 said:
Try to recompile using this device tree it should be more complete then yours in github
https://github.com/Tonygris/android_device_samsung_grandprimeve3g
Click to expand...
Click to collapse
It is the same device tree, but I'm delete all unused. Cyanogenmod is working, but still with few bugs.

eyeless95 said:
It is the same device tree, but I'm delete all unused. Cyanogenmod is working, but still with few bugs.
Click to expand...
Click to collapse
Do you need testers? i can help you testing the rom. I hope you can complete the port

hadesluisk said:
Do you need testers? i can help you testing the rom. I hope you can complete the port
Click to expand...
Click to collapse
Soon i will upload it. But there is one problem, it is TWRP Recovery backup, if flash only zip it is doesn't start.

eyeless95 said:
Soon i will upload it. But there is one problem, it is TWRP Recovery backup, if flash only zip it is doesn't start.
Click to expand...
Click to collapse
And how do you start it? i'll be waiting to try it

hadesluisk said:
And how do you start it? i'll be waiting to try it
Click to expand...
Click to collapse
Seriosly, I don't know) But after my experements maybe i broke something...but I think I will fix it, but now only backup.
P.S.: I don't need testers, I need developers, someone who will help me to fix issues.

hadesluisk said:
i'll be waiting to try it
Click to expand...
Click to collapse
http://forum.xda-developers.com/gra...2-1-samsung-galaxy-grand-prime-g531h-t3305519 here is a topic with Cyanogenmod.