Database Users

[REF] Bricked TG's problem solved - Instruction how to unBRICK

Hi all
I've just found and checked solution for many of you who BRICKED they loved TG.
I did it on TG01, dont have TG01A - so this have to be checked by owners.
I bricked my TG 5 times to be sure its working
Needed tools: http://u.115.com/file/f7fcb79872
TG software
TGTool 1.3
TG Downloader
TG drivers
TG have to be DISCONNECTED from PC!!!!
1. You need to be sure you have charged battery.
Use fried TG or some external charging solution.
2. Install TG Downloader
Before you will install application be sure that TG is NOT CONNECTED to PC.
Install Downloader and click next. Application should install TG01W drivers.
3. Prepare bin file.
tgtool -dec TG01WP_5005000176.tsw tg01.bin
3. Open Downloader as adimi (Vista)
4. Click on Browse and select tg01.bin. App will inform you about problem with version but accept.
Now connect your TG with charged battery to PC. Windows should start install drivers and new device Toshiba DL and some ports. After installatin click "Change Port" at Downloader and choose "Toshiba Download Port" and click "Download Mode". App will inform "Faild to open port" click OK and click "Downloade Mode" again. On status bar app will inform Done and LED on TG will start to be white.
Click on "Start Download" and go to make small coffe. TG's LED will start to blink on many colours and its correct.
Wait till appp restart your TG.
And you loved device is working again.
Have nice day

where is the softwares?

Found it here http://www.4shared.com/file/AK6TIAwK/TG_Downloader.html

Laserek_Poland said:
Found it here http://www.4shared.com/file/AK6TIAwK/TG_Downloader.html
Click to expand...
Click to collapse
thx!i will try and report!

yeahhhhh !!!
can someone confirm this?

anyway...i can't find the tg drivers...
where to find them?
or operation will install drivers automaticly?

Auto - install app and drivers will be installed

Great!
it works!
this is the TG01'S cable flashing method and way to saving bricked TG01S
THX,very nice!

Thank so much Laserek_Poland, but your link is invalid, please check again.

Great!!!
If this method works then can it be applied for other things?

Yeah the link is no longer valid, if possible you or FFBoy could repost the file/or complete set of files it would be great, the fear of flashing would be over for most of us

Depends what do you need.
Generally its to up broken TG.
As for SW will make my 4shared and will share

I deleted my setup and asked ff... to share application he downloaded.

ffboy2009 said:
Great!
it works!
this is the TG01'S cable flashing method and way to saving bricked TG01S
THX,very nice!
Click to expand...
Click to collapse
Hey ffboy2009, would you uploaded somewhere program because the link does not work.Thanks.

After he will update I attach it to first post

a new link would be good, cant wait to unbrick my device

seems like there are many of us brickowners waiting for that link..
plaease upload tg downloader asap.
many thanks

nekicowek said:
seems like there are many of us brickowners waiting for that link..
plaease upload tg downloader asap.
many thanks
Click to expand...
Click to collapse
Hi Laserek_Poland, can you check on your PC, looking for some file as .inf file to choose driver and send for us, many mem need your file to unbrick our Tgs phone, many thanks

Laserek_Poland said:
Found it here http://www.4shared.com/file/AK6TIAwK/TG_Downloader.html
Click to expand...
Click to collapse
Thanks for the guide. We are waiting for the link.

Laserek_Poland said:
I deleted my setup and asked ff... to share application he downloaded.
Click to expand...
Click to collapse
Where did you find it, any clue?

Xperia Won't Start after ROOTING !!

Hey GUYS please HELP ME
I have followed the Guide to root the xperia x10 in this forrum. So here is what happened. After completing step 3, it all went fine but then the thread says I have to install the Market fix for X10i users. After done that, my phone restart and it won't let me to go inside. It has a weird picture.
Anyway, can you guys please tell me to unroot or whatever to gain the access to the phone again? I tried the phone repair from PC suit to flash the x10 but it doesn't work anymore.
PLEASE HELP ME ... I swear i won't root again

use this..
mentioned in an other thread...
Forum: XPERIA X10 Android Development
Thread: Decrypted x10 roms - latest r2ba024 rom - with sin reconstructor
Entry: #2 from top (jerpelea 18th May 2010, 04:35 PM)
[sorry, but im not yallowed to post links..?!]
"
Flash Tool (can unbrick X10i with provided files)
for software update of X10a unbrick just overwrite .sin files with desired ones from post above
(+ link to tool +)
read HowTo.txt from flash tool
"
1.) download that
2.) get the DeviceID.txt file right
3.) Bjurn
=> gives you an older version, but it's working!

Hi, Thanks for your reply. I will appreciate but where is the downloading? Do you think its gonna work with my xperia? I can't even go inside the phone. Just the SONY ERICSON screen and its stuck there !

kelvin103 said:
Hi, Thanks for your reply. I will appreciate but where is the downloading? Do you think its gonna work with my xperia? I can't even go inside the phone. Just the SONY ERICSON screen and its stuck there !
Click to expand...
Click to collapse
You didn't read his reply??
Forum: XPERIA X10 Android Development
Thread: Decrypted x10 roms - latest r2ba024 rom - with sin reconstructor
Here's the direct link post #3 is where your wanting to go.
Direct link

Oh here this is the guide you'll want to fallow in rooting your phone easy as it gets with pics and everything.
Easy root

I tried them.... It requires my device ID. How can I do that when I can't go inside my phone!? So what I did was I copied the Device ID.txt when I last rooted to the X10Flash_Unbrick folder. The problem is not solved. Please check the image.

kelvin103 said:
I tried them.... It requires my device ID. How can I do that when I can't go inside my phone!? So what I did was I copied the Device ID.txt when I last rooted to the X10Flash_Unbrick folder. The problem is not solved. Please check the image.
Click to expand...
Click to collapse
You don't get your device ID from the phone you get it from your PC. Make sure you use the same USB plug everytime you connect your phone to your PC. I would download the auto device ID finder and install it as per instructions and run from step 1 again.
Also are you on a 32 bit OS or 64 bit OS, if your on a 64 bit you might be having issues with Java which requires you to install java pacs.

( Help me ) How do I install Rom And I can not run my phone

Hello .. Excuse me I do not speak English...Use Google Translate.....
My mobile does not have a system .. For I am System Format
( Stops at the word Sony Ericsson )
How do I install the ROM it and I'm in this case ?
And thank you

If you have a backup, use restore on xrecovery, if you don't, upload other ROM to your SD from other phone and install it.
I speak spanish, if you too I can help you.

If you want stock ROM (system as you called it) download SEUS from sonyericsson.com and follow instructions.

diegoxcore12 said:
If you have a backup, use restore on xrecovery, if you don't, upload other ROM to your SD from other phone and install it.
I speak spanish, if you too I can help you.
Click to expand...
Click to collapse
I can not access to the xrecovery

Dare-Devil Inside said:
If you want stock ROM (system as you called it) download SEUS from sonyericsson.com and follow instructions.
Click to expand...
Click to collapse
I try and go back. Thank you

M_A_S said:
I try and go back. Thank you
Click to expand...
Click to collapse
I tried no use

If you haven't another choice you can try this: http://forum.xda-developers.com/showthread.php?t=1011071
second step, but only if you don't have another choice I haved you same problem and I use the warranty 'cause this topic didn't exist xD

1. Download this: http://www.multiupload.com/7H4JT35B6G
2. Download ROM image:
X8 Shakira E15i_2.1.1.A.0.6_generic.ftf
3. Place ftf file in /firmwares directory of your flashtool.
4. Install drivers from /drivers directory (if your antivirus doesn't like them, disable the antivirus )
5. Prepare yourself - plug the USB cable to the computer (NOT TO THE DEVICE YET) and launch flasher.
6. Click "flash", choose your ROM from the list, wait for instructions.
7. When the instruction pops up, press and hold "back" button on your X8 and plug the cable into it. Keep holding untill you see that flashing of files has begun, then you may release it.
8. Flashing will take a while, you may observe the progress on a bottom bar. When it's finished you will be asked to plug off your device and reboot it.
9. Tadam! It's functional again! Clean installation which you may screw up again

Are you try to use Sony Ericsson US to fix you phone ????...Some times US can fix most Question, then your phone will to the first time you get it..., i think you could to have a try...good luck for u....
Sorry for my poor englis.

Thank you all
May Otapetkm Thanks again

M_A_S said:
Thank you all
May Otapetkm Thanks again
Click to expand...
Click to collapse
Try to watching this video for tutorial.. for rooting your phone
http://www.youtube.com/watch?v=6AWYA1RkRhI&feature=related
to install new ROM
http://www.youtube.com/watch?v=lPV6Ue5a0Ww&feature=related
Hope this can help you

M_A_S said:
Thank you all
May Otapetkm Thanks again
Click to expand...
Click to collapse
try to use flashtool,,

[Q] Help anyone. Idiot Guide to rooting back to OS 1.6?

Hi, i have been looking through some of the rooting, flash threads on here and there is a bit too much information,lol.
Can anyone detail the basic steps, software required to roll my X10 back to the 1.6 OS?
I am still having connectivity issues when trying to use the handset in the car.
The vehicle manufactures website shows that the Xperia X10i is compatible with their factory fitted handsfree systems, but only on OS 1.6.
1. Download this and extract in any folder of your computer:megaupload.com/?d=HCWX4KO3 (The credits of this goes for its creators)
2. Open the folder that its named 1_firmware and in the fileDeviceID.txt copy yours, save and close. (This is the same as the one used on the flashtools of Bin4ry)
This is how you can get your DeviceID on Windows: (Again thanks tojimbo77)
2.1: Connect your phone to the computer on the USB port you are going to use to flash it.
2.2: Press start (or windows icon) and in the run box type regedit
2.3: Click edit>find, and type in Vid_0fce&Pid_adde. You should find "DeviceInstance". If that fails, make sure Match whole stringis un-ticked, and click find next or press f3, if that fails, tryUSB\VID_0FCE&PID_ADDE. Copy the last section of that, it should look something like "5&2888d0ff&0&1".
Note: It changes with every diffrent USB port you use....3. Download your Firmware, extract it and copy all the files on it to the 1_firmware folder. You don't have to erase anything from this folder, unless you got the message to replace a file.
4. Now run the RootX10a_v2.cmd and select step 1 and follow the instructions. If done correctly you will see a window that starts to write and write and write a lot of things. This process will take around 5 minutes, so be patient. (It is like if you were flashing your phone)
5. Turn your phone on and wait until you get the configuration screen.
6. Now connect the phone to the PC and run PC Companion or SEUS. If it shows that there is a new software for your phone, follow the instructions and update if you want.
7. Enjoy your phone on Android OS 1.6 or 2.1 with your operator
Thank you on anticipation to any help offered.
I have had a look here, but am not 100% if this is all that i need to do?
Sorry, not able to post the link, being a new user.
The one part that is not clear to me is where they say, "Open the folder that its named 1_firmware and in the fileDeviceID.txt copy yours, save and close"
What is it that im supposed to copy?

No.. no...
You need the flashtool and the 1.6 files..
I cant seem to find the 1.6 files...
Why do you need 1.6?

SE seem to have done something with the update 2.1 where the phones Bluetooth will connect to my vehicle, but only for about 40 seconds, then removes its self and then re attaches, then removes its self again and this goes on for the duration the handset is in the car with me.
The handset i have just now was a replacement for my original and came with the 2.1 OS already updated.
The original 1.6 OS that was on the phone connected to my vehicle and gave me phonebook access.
I have neither now hence why i wish to roll back to the software that is compatible with my vehicles system. 1.6 buildR1FA016 Kernel 2.6

Get your phone rooted, load Xrecovery.
and flash Wolfbreaks CM rom.
And watch the magic.

OmegaRED^ said:
Get your phone rooted, load Xrecovery.
and flash Wolfbreaks CM rom.
And watch the magic.
Click to expand...
Click to collapse
Thanks for the above, but can you break this into more simple instructions, links etc as this is way above me. I'm not totally useless, but i have never done anything like this, so it is all double dutch to me at this point in time,lol.

Download the flashtool from androxyde's thread then follow the instructions to flash the latest FW, then reboot your phone plug it in and press root on the flashtool and then reboot and install XRecovery and use it to install a custom ROM by following the directions in a ROM thread.
Just start by reading the Flashtool thread.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!

CMoney87 said:
Download the flashtool from androxyde's thread then follow the instructions to flash the latest FW, then reboot your phone plug it in and press root on the flashtool and then reboot and install XRecovery and use it to install a custom ROM by following the directions in a ROM thread.
Just start by reading the Flashtool thread.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Click to expand...
Click to collapse
Had a read at the flash tool thread and even more confused now, too much information and no understanding of what it all means.

I am looking for someone who can supply links to what i actually need to roll the phone back.
What software do i require.
Do i have to root the phone and if so, how do you do this?
I did say in the thread title an "Idiots Guide". Simple and straightforward instructions that a first timer can comprehend, similar to the text in my first post, bullet points?
Thanks.

Bonzo67 said:
I am looking for someone who can supply links to what i actually need to roll the phone back.
What software do i require.
Do i have to root the phone and if so, how do you do this?
I did say in the thread title an "Idiots Guide". Simple and straightforward instructions that a first timer can comprehend, similar to the text in my first post, bullet points?
Thanks.
Click to expand...
Click to collapse
Dude.. all the threads have the answers.
Read abit it won't kill you.

OmegaRED^ said:
Dude.. all the threads have the answers.
Read abit it won't kill you.
Click to expand...
Click to collapse
I did and it's version this and version that. So which version is it that i actually need without screwing up my phone?
Suppose i'm more looking for something along the lines of what you would get if you downloaded a torrent file, where everything is in the one folder, inc the instructions.
Anyway, hopefully problem is sorted, as i am ditching SE after 10 years of using their handsets and going to Samsung which is compatible with my vehicles factory fitted system.

Bonzo67 said:
I did and it's version this and version that. So which version is it that i actually need without screwing up my phone?
Suppose i'm more looking for something along the lines of what you would get if you downloaded a torrent file, where everything is in the one folder, inc the instructions.
Anyway, hopefully problem is sorted, as i am ditching SE after 10 years of using their handsets and going to Samsung which is compatible with my vehicles factory fitted system.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1060703

[TOOL] rkBreakout v1.2 -- HUAWEI Ascend W1 jailbreak tool

It's dangerous if you don't know what it is.
You must read every instructions in the tool carefully.
I don't guarantee that I'll answer every questions about this tool.
W1-C00 and W1-U00 are both supported. W1-U34 is not confirmed, but it should be same as W1-U00 in theory.
XP is not supported, you need Vista and above system.
Tested only on China ROM GDR 0/1/2/3, but all ROMs are compatible in theory. If something wrong, post your phone's version and ROM version.
Only universal homebrew xap will work. Anything use Samsung service won't work.
Click to expand...
Click to collapse
If you messed up everything and don't know how to fix, try this to get your phone alive.
http://forums.wpcentral.com/huawei-ascend-w1/229445-those-who-get-their-w1-market-locked-china.html
Features (part):
Interop Unlock
Xap CAPs Unlock
Camera shutter sound option
Wifi static IP option
Map2SD
MTPRoot
Sorry for my bad English in translation of this tool.
rkBreakout v1.2e Build 2014.04.07:
View attachment rkbreakout_v1.2.zip
Click to expand...
Click to collapse

Reserved

some little corrections to your translation, if you don't mind.
2. This tool may corrupt your device and void your warranty, use it at your own risk. The author has made best efforts on this tool to avoid these risks, but the author cannot be held responsible for any damages to your phone. If your device is corrupted, the author will not provide any service or guide to repair.
5. This tool is NOT a ROM-Flashing tool, so all your data is preserved after jailbreak.
Hope I could help.

is there a bootloader fix option for w1-U34(GDR1 Windmobile-Canada ) . I tried your app with both u00 and c00 options andIt shows the phone in device manager and in step 4 "Phone Connected". But in step 5 it shows waiting for phone to restart, With an error message " Image download Failed. Cookie (if Present) not Received. Could you add an option of this model too, or is there a way to change it from u34 to u00.
P.S on a sidenote Great job on the app its pretty easy to use, I do get an error when I open it runtime error '53' - File not found, after I click ok opens the app not sure if im missing something or its a problem with the app

Any Huawei apps with Interop caps are possible to install like Memory managment?

Suhaib10 said:
is there a bootloader fix option for w1-U34(GDR1 Windmobile-Canada ) . I tried your app with both u00 and c00 options andIt shows the phone in device manager and in step 4 "Phone Connected". But in step 5 it shows waiting for phone to restart, With an error message " Image download Failed. Cookie (if Present) not Received. Could you add an option of this model too, or is there a way to change it from u34 to u00.
P.S on a sidenote Great job on the app its pretty easy to use, I do get an error when I open it runtime error '53' - File not found, after I click ok opens the app not sure if im missing something or its a problem with the app
Click to expand...
Click to collapse
Currently W1-U34 is not supported because partition struct is unknow.
Runtime error is a small bug, fixed, thanks.
djtonka said:
Any Huawei apps with Interop caps are possible to install like Memory managment?
Click to expand...
Click to collapse
No, Storage Manage need driver by Huawei. AFAIK only Russian ROM has driver support it.

You should details this jailbreak, most users do not know what expect after it. Anything new on menu, visible an partition hided before or Interop etc

djtonka said:
You should details this jailbreak, most users do not know what expect after it. Anything new on menu, visible an partition hided before or Interop etc
Click to expand...
Click to collapse
It's fun for users that finding new stuff by themselves. Actually only a little things have been changed after jailbreak.

Doing now 2nd time and have perform HR again due to stocking on black screen after booting and your logo.

reker said:
Currently W1-U34 is not supported because partition struct is unknown.
.
Click to expand...
Click to collapse
well if there is anything I can do to help u find out, let me know ill be more than happy to help.
also is there a way to backup my current rom (stock).

Suhaib10 said:
well if there is anything I can do to help u find out, let me know ill be more than happy to help.
also is there a way to backup my current rom (stock).
Click to expand...
Click to collapse
Post 'About' on your phone, I need hardware and cpu model
W1-U34_1030.5614.46900.20900.USA-Channel.rar:
http://pan.baidu.com/s/1o6LkhN8

Reker is samething wrong with it, always got black screen while after booting and Huawei logo. Only after HR the phone is booting properly but is nothing missing after it?

djtonka said:
Reker is samething wrong with it, always got black screen while after booting and Huawei logo. Only after HR the phone is booting properly but is nothing missing after it?
Click to expand...
Click to collapse
My mistake, an old test file was used in tool. I'll corret this in 30minutes
Edit:
Fixed, try again

Won't even start

djtonka said:
Won't even start
Click to expand...
Click to collapse
You mean the tool? I tried it's OK on my computer. Maybe upload problem? I use my server as a proxy to pack and upload.
I've packed again and reuploaded it

it is working like a charm now

reker said:
Post 'About' on your phone, I need hardware and cpu model
W1-U34_1030.5614.46900.20900.USA-Channel.rar:
http://pan.baidu.com/s/1o6LkhN8
Click to expand...
Click to collapse
Here you go even attached other stuff from HWdiag
I'll try that out that rom . Thanks

Suhaib10 said:
Here you go even attached other stuff from HWdiag
I'll try that out that rom . Thanks
Click to expand...
Click to collapse
U34 should be same as U00. You can try change a computer or reinstall QPST/Driver first. Some people said that 'cookie not present error could be fixed by using a winxp/another qpst windows driver'

reker said:
U34 should be same as U00. You can try change a computer or reinstall QPST/Driver first. Some people said that 'cookie not present error could be fixed by using a winxp/another qpst windows driver'
Click to expand...
Click to collapse
that could be the problem cause I was trying on Win 8 and it auto found the drivers didn't need to install them. I'll try it on XP later today.

Suhaib10 said:
that could be the problem cause I was trying on Win 8 and it auto found the drivers didn't need to install them. I'll try it on XP later today.
Click to expand...
Click to collapse
The driver should be installed manually, do not use the driver system auto provided.
Don't try XP, the tool do not support it