Does anyone have the band configuration files (from /system/etc/motorola/bp_nvm_default/) for a stock AT&T Flipout? I am not able to reflash the AT&T firmware and the european configuration files are not working with T-Mobile's network.
jayjech said:
Does anyone have the band configuration files (from /system/etc/motorola/bp_nvm_default/) for a stock AT&T Flipout? I am not able to reflash the AT&T firmware and the european configuration files are not working with T-Mobile's network.
Click to expand...
Click to collapse
Here are band files from my AT&T Flipout
Hope this help
http://www.mediafire.com/?i8g2232dujrwrzi
I have a D802 Hong Kong version. In the secret menu (3845#*802#) i have found this: LGD802AT-00-V10C-HKG-XX-NOV-30-2013
Now, I would like to use the 4g connection in my country (Italy, carrier TIM) but the 4g option is not avaible in "network mode". After a test with another G2 (italian version and same carrier), I can say that the connection don't switch automatically on 4g but keeps the H+ one. So i think is necessary a modification.
Solutions?
Is it necessary to flash an europe radio? or something else? I'd like to keep the stock rom Lg but is not a fundamental.
Baseband: M8974A - AAAANAZM - 1.0.190036
Kernel: 3.4.0
Build: JDQ39B
I have the g2 for two days. I know it very little. I do not have much knowledge about it. Some good soul can explain to me how to do?
I need your help!
Did you verify that the device has the correct radio bands for the lte on that carrier?
x714x said:
Did you verify that the device has the correct radio bands for the lte on that carrier?
Click to expand...
Click to collapse
I don't know how to check! On the box of g2: gsm 850/900/1800/1900; wcdma 850/900/1900/2100; LTE 2100(B1)/1800(B3)/2600(B7)/900(B8)/800(B20).
My carrier is Tim but i don't kwow which band uses.
In secret menu/LTE Band section: avaible band 1,2,3,4,5,7,8,17,20,40. No one is selected.
Can i flash V10E firmware for Italy on V10C firmware for honk kong (actually on my device)?
Flashing different firmware wont help. Its either your apn is wrong or you didnt enable lte correctly. I checked and TIM uses 1800 (band 3) lte which your phone should work with.
x714x said:
Flashing different firmware wont help. Its either your apn is wrong or you didnt enable lte correctly. I checked and TIM uses 1800 (band 3) lte which your phone should work with.
Click to expand...
Click to collapse
maybe i should enable "band 3" in LTE setting in secret menu.
Hi,
I've a similar question and I hope someone could help me: I've a G2 phone using the D80210e-ESA-XX firmware.
In the product specifications, supported LTE frequency bands are 900/1800/2100/2600/850. I know that in Italy working frequency bands are 800/1800/2600. Now, my phone does not support 800 MHz: do you think is possible to upload a different firmware (IT or EUR ones) on my phone? With one of these firmware, does the device will work at 800 MHz?
Thank you so much.
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
Hi @zacharias99, are you using the LTE in Italy?
@sunshonic, I didn't understand if your LTE works in Italy using the secret menu. Is it working?
Thank you
madner81 said:
Hi @zacharias99, are you using the LTE in Italy?
@sunshonic, I didn't understand if your LTE works in Italy using the secret menu. Is it working?
Thank you
Click to expand...
Click to collapse
No no i am using the LTE in Greece!!!
But LTE is LOCKED in Korean firmware!!!
In older Korean Firmware you could activate LTE from secret menu but in newer version this option has been removed!
The only solution in my case was to flash a european (or in your case italian) Firmware and everything worked like it should
zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
Same here, restored to stock eu/nordic. Using HK G2 in Norway. No issues with 4G now
Sent from my LG-D802 using Tapatalk
Does your country offer 4G networks? I'm in Kenya n any 4G device I ship in shows 4G even though we dont have it yet
Sent from my HTC One using XDA Premium 4 mobile app
popsi said:
Same here, restored to stock eu/nordic. Using HK G2 in Norway. No issues with 4G now
Click to expand...
Click to collapse
@popsi, @zacharias99 did you follow a specific procedure to upload the european firmware. I'm not so sure to perform it cause some month ago I've bricked an old Motorola (I don't remember the exact model) using simply a firmware of a different country. The result was a brick cause two firmware did not use the same way to allocate the memory...
madner81 said:
@popsi, @zacharias99 did you follow a specific procedure to upload the european firmware. I'm not so sure to perform it cause some month ago I've bricked an old Motorola (I don't remember the exact model) using simply a firmware of a different country. The result was a brick cause two firmware did not use the same way to allocate the memory...
Click to expand...
Click to collapse
My friend i don't really know where in this forum the instructions for flashing a new stock firmware are... (I am also new in this community)
And i flashed it with Greek instructions so my link won't help you and i don't want to post some link i haven't tested by myself...
Sorry i hope you can understand!
At moment i have no time, but if I would be you I would search in the G2 Section for instructions!
They must definitely be somewhere!
Did you subscribe for LTE with your carrier?
Sent from my LG-D802 using Tapatalk
zacharias99 said:
I also had the D802 with Korean firmware!
Even though the phone itself supports LTE the Korean firmware doesn't!
I flashed the EU version and everything worked fine afterwards!!!
Click to expand...
Click to collapse
@zacharias99, I've checked that 4G can be enabled using the secret menu
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
as in the post http://forum.xda-developers.com/showthread.php?t=2494751
At the moment it doesn't seem to work for me, probably because my sim still has not been enabled for 4g.
Have you ever enabled this option (with the previous korean firmware, I mean)?
@zacharias99, @popsi: the new european firmware allows to navigate over the 800MHz frequency band for you?
Thank you
madner81 said:
@zacharias99, I've checked that 4G can be enabled using the secret menu
1. Go to LTE-Only
2. Modem Settings
3. RAT Selection
4. Select GSM / WCDMA / LTE auto
as in the post http://forum.xda-developers.com/showthread.php?t=2494751
At the moment it doesn't seem to work for me, probably because my sim still has not been enabled for 4g.
Have you ever enabled this option (with the previous korean firmware, I mean)?
@zacharias99, @popsi: the new european firmware allows to navigate over the 800MHz frequency band for you?
Thank you
Click to expand...
Click to collapse
Hi,
the procedure using the secret menu definitively works on my D80210e-ESA-XX, but I need to re-select it after every reboot.
Does anybody know how to make it permanent or how to automate this selection on boot (maybe using Tasker or something similar)?
zacharias99 said:
No no i am using the LTE in Greece!!!
But LTE is LOCKED in Korean firmware!!!
In older Korean Firmware you could activate LTE from secret menu but in newer version this option has been removed!
The only solution in my case was to flash a european (or in your case italian) Firmware and everything worked like it should
Click to expand...
Click to collapse
by flash, did you mean flash kdz of different region?
gpkumaran said:
by flash, did you mean flash kdz of different region?
Click to expand...
Click to collapse
yes exactly!
I flashed the European .kdz file!
I have an international G2 D802.. We, in india have certain operators in Band 40 LTE.. Is it possible to activate Band 40 in D802 by flashing D802T kdz in D802??? Kindly Help..
Hello, I have a Sim unlocked bell Canada note 3 and an planning to rent/borrow a NTT Docomo Sim card from a friend in Japan for use while on a trip in Japan.
I have a stock firmware and modem and am wondering if I can flash another modem to gain access to the NTT Docomo spectrums because right now as is my phone will only be and to access the UMTS 2100 spectrum.
Technical info
Bell Canada stock note3
LTE: 700/850/AWS/1900/2100/2600
HSPA/UMTS: 850/1900/2100/AWS
NTT Docomo spectrum
LTE: 1700/1500/800/2000
UMTS: 2100/800
If any of my facts are incorrect please advise.
Thank you.
Bell Canada Note 3. Stock Rooted 4.3
I think what I'm wondering most is I'd modern hardware is what locks frequencies or if it's all software and ask it takes is installing student drivers?
Bell Canada Note 3. Stock Rooted 4.3
nickzan said:
I think what I'm wondering most is I'd modern hardware is what locks frequencies or if it's all software and ask it takes is installing student drivers?
Bell Canada Note 3. Stock Rooted 4.3
Click to expand...
Click to collapse
SM-N9005 variants have completely same hardware but different software (firmware)
so if u have problem with modem u should flash another rom that 1. compatible with ur device (for N9005) 2. compatible with region.
:good:
nickzan said:
Hello, I have a Sim unlocked bell Canada note 3 and an planning to rent/borrow a NTT Docomo Sim card from a friend in Japan for use while on a trip in Japan.
I have a stock firmware and modem and am wondering if I can flash another modem to gain access to the NTT Docomo spectrums because right now as is my phone will only be and to access the UMTS 2100 spectrum.
Technical info
Bell Canada stock note3
LTE: 700/850/AWS/1900/2100/2600
HSPA/UMTS: 850/1900/2100/AWS
NTT Docomo spectrum
LTE: 1700/1500/800/2000
UMTS: 2100/800
If any of my facts are incorrect please advise.
Thank you.
Bell Canada Note 3. Stock Rooted 4.3
Click to expand...
Click to collapse
I am not entirely convinced that is a good idea - modem files are now notoriously difficult to write with Odin on Qualcomm devices. You should also look into the US threads where I believe there are sensible bounties for making one model of phone to work on the frequency of some other carrier, and none of those being claimed should suggest things are far from simple.
Hey guys -
So like many of you, I reflashed my two Yotas to the latest RU Lollipop and was wondering if there was another radio firmware file that might wake up the AT&T US LTE bands. Any thoughts? Has anyone tried flashing the different radios to see if you can get a 4G LTE signal stateside?
Thanks,
Rootdude
what upload/download speed do you have now?
YotaDevicesRussia said:
what upload/download speed do you have now?
Click to expand...
Click to collapse
I have HSPA+ on AT&T . Can you help us with US modem firmware for LTE?
ivanupolo said:
I have HSPA+ on AT&T . Can you help us with US modem firmware for LTE?
Click to expand...
Click to collapse
HSPA+ can be sometimes very good - 3-15Mb/s - what is your speed at the moment? can you check through speedtest.net ?
At&t firmware
I have around 3.5 mbs to download and 0.6 uploaf. Too small comparing local 4G. So, can you help us?
I do not think you can change that easily, there's a thread talking about changing Radio Bands but the conclusion I got from the reading is that it does not work, at least with current "user" knowledge, YD206 is from China or HongKong, and some of those LTE Bands can work in Europe, not so much on the USA, the bands that USA telephone companies are very different than Europe or Asia, and as such YD206 IS NOT compatible with USA LTE bands. UMTS can have much higher upload speed than the ones you posted, so it might be your network problem, don't know if they are any better in LTE over your region.
Should be possible
Qualcomm 8974 supports all LTE bands. We just need proper modem firmware for US bands. Method in those threads definitely doesn't work since Qualcomm introduced some hidden filters inside firmware
BTW, there is lte_prefferedband file in the modem folder of Yota EFS. Does anyone know how to edit it?
That might be a anti-tampered code against our NV changes
Ok, I found out. For AT&T we need qcn file from Yotaphone 2, model 205. I don't know it such thing exist on the market but this reference says that it might be compatible with At&T.
https://www.frequencycheck.com/models/A1JaO/yota-yotaphone-2-yd205
ivanupolo said:
Ok, I found out. For AT&T we need qcn file from Yotaphone 2, model 205. I don't know it such thing exist on the market but this reference says that it might be compatible with At&T.
https://www.frequencycheck.com/models/A1JaO/yota-yotaphone-2-yd205
Click to expand...
Click to collapse
interesting thing is that YD205 model was never launched, so it doesn't exist at all, unfortunately. The inquiries about future developments of this model were negative...
Hi everyone, I search a solution on my problem for days and I didn’t find the solution. I ask for your wises advices…
I’ve got a Samsung G892U on T-Mobile, but I’m living in France. The G892USQS5BSE4. I need the WCDMA B8 900MHz which is blocked by the T Mobile Firmware. I followed the advices of T Mobile forum https://support.t-mobile.com/message/684694#684694
But I wasn’t successful to change the CSC to another carrier. I tried to search for custom rom but apparently with my bootloader 5, I’m stuck.
https://forum.xda-developers.com/galaxy-s8/development/root-partcyborgrom-galaxy-s8-active-t3747788
Apparently, I can do a Cross-Flashing to ATT without root and with Odin. But I didn’t find any ATT firmware link…
Could you please help me to do a cross-flashing and get the bands free ?
Can you tell me if there is a bounty for a custom rom G892USQS5BSE4 or equivalent ?
Thanks by advance
Cross flashing
Ok I continue my investigation:
I found a rom ATT G892AUCU5CSF8. I can't post the link due to post restriction but I will later.
At least I manage to find a V5 Bootloader as mine.
AP_G892AUCU5CSF8_CL16246491_QB24403100_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar.md5
BL_G892AUCU5CSF8_CL16246491_QB24403100_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_G892AUCU5CSF8_CP13055467_CL16246491_QB24403100_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_ATT_G892AATT5CSF8_CL16246491_QB24403100_REV00_user_low_ship_MULTI_CERT.tar.md5
I tried a basic install of the rom G892A on my G892U with Odin. Waht a surprise, I get a message secure check fail: pit
Do you have any tips to do this cross-flashing ?
Regards
hello did you manage to free the bands?
I live in Spain and I need to release the 900mhz 3g and 800mhz 4g (b20) bases
tusraul said:
hello did you manage to free the bands?
I live in Spain and I need to release the 900mhz 3g and 800mhz 4g (b20) bases
Click to expand...
Click to collapse
Hello ! I'm also need to get the bands free ! Did u succeed?