I have unlocked 16gb and when i press the buttons i think it goes into recovey mode so can be be some help to root the device or flash gingerbread on it. Guys with locked devices what happened when you press power and volume down buttons.
Related
I notice a problem with my vol down, here is the symptoms. When i press vol down there is no immediate response, after few seconds of delate the system vol went all the way down to slient mode like I was press and hold the vol down button. I have no problem with vol up and I have no problem pressing both up and down to boot into recovery mode, but during recovery mode the vol down is still not working right. It also have the delate problem but doesn't seem to have press and hold effect while I just press it once.
I am running on Vibrant6 rom from the forum. Is this a rom/firmware problem or a hardware problem?
BTW it was fine when I bought it from ebay.
all the instruction are same.
1. press and hold the power button + volume down button at the same time.
2. when see the lg logo release them.
3. then push them again and hold (or hold only volume down button)
4. then I will enter in the recovery mod on lg g 2
but unfortunately this instruction did not working for my lg g2!
how will i do now?
i have put wrong knock code and then i need to put the backup code but unfortunately i have forgotten the code. there is no internet connection on the phone so Google recovery doesn't working. what can i do now?
still i am not able to enter recovery mod, so i am not able to hard reset
The key combinations are different for every bootloader.
If you are rooted and you installed custom recovery menu then you have JB bootloader and the key combination specified by you should work.
But if you are on stock firmware (with stock recovery menu) then you have KK bootloader and the key combination is different:
dorimanx said:
With the Kitkat update the process has changed:
Power OFF by holding long the power button till black screen!
Press and hold power and volume down until you see the LG logo then release and press and hold the volume up and volume down buttons until reset screen appears.
Click to expand...
Click to collapse
Do the instructions you said, but don't release volume, just release power button at LG logo and then press it again right away.
Sent from my LG-VS980 using XDA, powered by appyet.com
ornobohornish said:
all the instruction are same.
1. press and hold the power button + volume down button at the same time.
2. when see the lg logo release them.
3. then push them again and hold (or hold only volume down button)
4. then I will enter in the recovery mod on lg g 2
but unfortunately this instruction did not working for my lg g2!
how will i do now?
i have put wrong knock code and then i need to put the backup code but unfortunately i have forgotten the code. there is no internet connection on the phone so Google recovery doesn't working. what can i do now?
still i am not able to enter recovery mod, so i am not able to hard reset
Click to expand...
Click to collapse
that happened with me also, so here is what helped me.
hold power button and volume up button instead of volume down.
1. Sorry for noob English.
2. My S4 home broken.
3. Before i format System partition i use power menu to enter recovery mode
3. After i formar System partition i got Samsung and GT-i9500 at start up and got black screen ever
4. How i can enter to recovery mode to install new rom ?
Ignore the home button. Try pressing just Volume + and Power.
Strephon Alkhalikoi said:
Ignore the home button. Try pressing just Volume + and Power.
Click to expand...
Click to collapse
Thx bro for answer !!!
When i try pressing just Volume + and Power
My phone restart and black screen and restart and black screen TT
Flash a stock ROM through Odin. That should get you back to a running state. From there you can customize as needed. None of the key combinations need the home button to work, so you shouldn't have issues. But, you should repair that home button anyway.
if you still have a recovery then you need to let go of the buttons as soon as you see blue text at the top of the screen. if you continue holding the buttons it will try to boot the rom...
With broken home you can not enter recovery mode or download mode. Recommend replace a new home button or sell it to buy a new phone.
I dont think you need the home button. Press and hold volume up. Then press power button and release it after a few sec but keep holding volume up.
Same method applies for download mode only then with volume down.
@DSA: Next thing you know, he will have a way to reset the Knox flag.
I see a lot of people saying they cannot get into recovery mode with power+vol-up.
This is because its not that simple.
To get into recovery mode, you should reboot the phone by or while simultaneously holding the power and the volume up buttons.
But the trick is to release the power button when you see the big android logo/text while still holding the volume-up button.
Good luck!
My phone is stuck on Samsung Galaxy J7 powered by Android screen. Holding down power and volume down buttons for few seconds make the screen disappear for a moment, the phone vibrates, then it returns to the same screen again. How can I fix that? (I guess its because I chose older .img file from twrp.me/Devices/ because the newest one did nothing when I was trying to install TWRP.) I dont have enough posts to post on the developer thread so I posted here
Please help
Approx. battery right now is 65%
Edit: I cant go into recovery mode I have tried alot of times already
Well basically be sure that you're doing the recovery mode procedure right. Try holding the volume up + power button + home button simultaneously. Then let go of the power button when you see the phone logo but remain holding down the volume up + home button. Wait for a while, the recovery mode page should pop up shortly.
Try vol. Up+power+home button. When samsung logo appears go off power button only, keeping the vol. Up and home button pressed. Check if you can enter recovery mod, if not download firmware for your drvice(download the correct latest firmware for your model) in to your pc. Flash it via odin.