hi to all
I got I5700 galaxy Spica
cant flash it
hi to all I have I5700 galaxy spica
Problem is power on and then restart on startup.
I try flashing with odin downloader but
not get flash.
Error is same as stated here
I5700 flashing problem
I can found samsung usb composite device in device manager and samsung usb modem,but cant have samsung android usb modem in modems.
phone is in download mode,kies is installed rebooted system also
How to solve plz waiting for reply thanks
to check the ROM space on phone ,good luck to you .
So I already tried reading most of the threads about this problem but sadly I wasn't able to find the answer to my problem. I just recently reformatted my computer and thought that I want to return to stock ROM for now. But when I entered download mode and plugged the cable in, Odin cannot detect the phone.
I got frustrated after trying so I restarted my phone without disconnecting the cable. When the phone booted up normally, Odin was able to detect the phone, so I tried download mode again, nothing, now I tried recovery mode, detected.
I already tried:
- Installing Kies
- Installing just the drivers
- Trying debug on/off
Also, I've been having problems with "Samsung Mobile USB Modem" "An error occurred during the installation of the device. The required section was not found in the INF." Could this be the cause of the first problem?
Yes I just made this account to ask you guys this.
try new version odin search at caliban666 thread,if im not wrong he post a new version of odin.try installing a new samsung driver at dokys thread.i hope this will help u...
Try installing the drivers again..
If possible download them again..
**rooting is new for me...and i am noob to root...**
So only the download mode that isn't detected by odin? I have the same problem before. Here, when you go into download mode but odin doesn't detect your phone, press the power button until your phone turns black and don't let it to reboot. If your phone already turns black then go into download mode again (volume down+power+home). Odin should detect it.
For your 2nd problem, here you can download the samsung usb driver pack, I also experienced that after installing kies then "an error occured blabla". Driver here: http://forum.xda-developers.com/showthread.php?p=11498043
Sent from my GT-S5360 using xda premium
No luck.
I just tried the new Odin and installed the new Samsung drivers.
It's still the same for both problems.
- can't detect phone in download mode but it can detect the phone in normal and recovery mode.
- samsung mobile USB modem error still persists
Your os must be corrupted!!! I
Sent from my GT-S5360 using xda premium
Try this...
Install drivers again...
*Dont connect ur usb now*
Now go to download.mode...
*now connect ur pc with ur phone via usb...*
.
Wait for a min...
Now press up...
...
Maybe this help
**rooting is new for me...and i am noob to root...**
AMAZING...
menewtoroot said:
Try this...
Install drivers again...
*Dont connect ur usb now*
Now go to download.mode...
*now connect ur pc with ur phone via usb...*
.
Wait for a min...
Now press up...
...
Maybe this help
**rooting is new for me...and i am noob to root...**
Click to expand...
Click to collapse
thanks for your help...your the best....now odin can detect my s6102.....KEN from PHILIPPINES
nnehk02 said:
thanks for your help...your the best....now odin can detect my s6102.....KEN from PHILIPPINES
Click to expand...
Click to collapse
well.. u can rather press it ...
anyways.. dn't thnk me.. thnk to the creator of odin... android... savie for packages... nd others... (sry if i 4gt someones name)
Hi....my phone get detected by odin wen it is switched off nd connected to p.c but not in download mode. I soft bricked my device nd really need to use odin...can any1 help...it only stops gettng detected in download mode...shows 0003 added nd ol wen switched off
sarnz said:
Hi....my phone get detected by odin wen it is switched off nd connected to p.c but not in download mode. I soft bricked my device nd really need to use odin...can any1 help...it only stops gettng detected in download mode...shows 0003 added nd ol wen switched off
Click to expand...
Click to collapse
try this - maybe work . reinstall your usb samsung driver - restart you pc/laptop - put you phone to download mod (dont continue yet) - if you on pc put you usb cable at rear port not front - then connect you usb to phone - wait 30 second - and continue you phone to download mod . if still not show - put out you usb cable from phone - off and back to download mod without usb cable - wait then connect you usb cable . im got same problem as you before - and try use another usb cable .
Sent from my GT-S5360
put your phone in download mode and connect to computer
open odin
remove battery from the phone
odin will now see the phone connected
reinsert battery
Can a member who can use Odin with their GT-S5360 connect the 5360 in "Download Mode" to their PC, open Windows Device Manager and copy / paste the Device Instance ID shown under:
+Universal Serial Bus controllers
...Composite Device
by right-clicking it, choose Properties, then Details?
On my PC, it is shown as 'Unkown Device' with the following Device Instance ID:
USB\VID_0000&PID_0000\5&2E64F456&0&1
Which is most likely not what it should be.
I want to know what it should be.
I have two Galaxy Y's (one soft-bricked, the other working fine) and both show the same ID.
BTW, I have tried every port on the back of my PC with four Samsung data cables and three third-party cables and I cannot get Windows or Odin to recognize the GT-S5360 in download mode (both phones).
I have downloaded and installed / uninstalled / rebooted, etc. with the following versions of Samsung USB Driver for Mobile Phones:
1.3.1500
1.4.8
1.5.9
1.5.15
1.5.23
1.5.33
I have downloaded but cannot install version:
1.5.49
MCC InstallWizard says it "could not" install the drivers but no error message or log is given.
And for some reason, the "have disk" method of installing the drivers doesn't work either.
My PC is running XP SP3 x86, offline.
I download all files to my working phone, and transfer them to the PC.
One last thing, can someone who has USB driver version 1.5.49 installed, open Windows Services and check to see if the Samsung Connection service has started and is running?
Phone not detected on ODIN
When i connect my Grand 2 to my laptop... it is connected as MPT and showing as detected on PC... when i start ODIN. it doesnt give the yellow/blue light. The phone is also not detected on KIES (both versions). but i can copy files through windows explorer.
I have galaxy S2 and Note 3. they are both detected on odin. But Grand 2 is not.
I have installed usb drivers, reinstalled adb drivers on device manager, changed the cable. Nothing worked for grand 2.
Please help!!
Anser117 said:
When i connect my Grand 2 to my laptop... it is connected as MPT and showing as detected on PC... when i start ODIN. it doesnt give the yellow/blue light. The phone is also not detected on KIES (both versions). but i can copy files through windows explorer.
I have galaxy S2 and Note 3. they are both detected on odin. But Grand 2 is not.
I have installed usb drivers, reinstalled adb drivers on device manager, changed the cable. Nothing worked for grand 2.
Please help!!
Click to expand...
Click to collapse
m having same problem as you.
did you get any solution?
Simple solution.
kilogrip said:
Can a member who can use Odin with their GT-S5360 connect the 5360 in "Download Mode" to their PC, open Windows Device Manager and copy / paste the Device Instance ID shown under:
+Universal Serial Bus controllers
...Composite Device
by right-clicking it, choose Properties, then Details?
On my PC, it is shown as 'Unkown Device' with the following Device Instance ID:
USB\VID_0000&PID_0000\5&2E64F456&0&1
Which is most likely not what it should be.
I want to know what it should be.
I have two Galaxy Y's (one soft-bricked, the other working fine) and both show the same ID.
BTW, I have tried every port on the back of my PC with four Samsung data cables and three third-party cables and I cannot get Windows or Odin to recognize the GT-S5360 in download mode (both phones).
I have downloaded and installed / uninstalled / rebooted, etc. with the following versions of Samsung USB Driver for Mobile Phones:
1.3.1500
1.4.8
1.5.9
1.5.15
1.5.23
1.5.33
I have downloaded but cannot install version:
1.5.49
MCC InstallWizard says it "could not" install the drivers but no error message or log is given.
And for some reason, the "have disk" method of installing the drivers doesn't work either.
My PC is running XP SP3 x86, offline.
I download all files to my working phone, and transfer them to the PC.
One last thing, can someone who has USB driver version 1.5.49 installed, open Windows Services and check to see if the Samsung Connection service has started and is running?
Click to expand...
Click to collapse
Just reinstall your operating system of pc and install the drivers again. Everything will be fine.
Else try connecting it to another computer. It will WORK for 100^(1000000)%.
Hope it was helpful.
You should install full driver for SGY
I have tried to upgrade my galaxy y with cyanogen Android 4.4, when I tried to install using recovery mode my phone suddenly switched off.. And restarted. But struck in logo so I tried to reflash it but recovery mode was not showing it just struck at logo, & I even tried odin mode after several attempts it is opening download mode just once in a 20-30times, & cannot detect my phone in odin mode.. Do u guys have any suggestions??
I have tried to upgrade my galaxy y with cyanogen Android 4.4, when I tried to install using recovery mode my phone suddenly switched off.. And restarted. But struck in logo so I tried to reflash it but recovery mode was not showing it just struck at logo, & I even tried odin mode after several attempts it is opening download mode just once in a 20-30times, & cannot detect my phone in odin mode.. Do u guys have any suggestions??
yunos interface
my samsung grand 2 has "yun os interface" its not detecting by odin please help me
I just got my S4 and I wanted to connect to Kies via a usb cable at work, no wifi available. So I installed KIES and connected it and I am getting the dreaded " Reconnect device in Samsung Kies (PC Mode)" and it tells me to disable usb debugging. I have verififed that PC debugging is off and reinstalled Kies but still I get the same message. My usb mode is MTP... Any suggestions? I have tried different usb ports as well with no luck. Is anyone using Kies?
mcsephoenix said:
I just got my S4 and I wanted to connect to Kies via a usb cable at work, no wifi available. So I installed KIES and connected it and I am getting the dreaded " Reconnect device in Samsung Kies (PC Mode)" and it tells me to disable usb debugging. I have verififed that PC debugging is off and reinstalled Kies but still I get the same message. My usb mode is MTP... Any suggestions? I have tried different usb ports as well with no luck. Is anyone using Kies?
Click to expand...
Click to collapse
Sorry I dont have a better answer but try another cable if you have one. Ive seen this be the root of the issue many times.
mcsephoenix said:
I just got my S4 and I wanted to connect to Kies via a usb cable at work, no wifi available. So I installed KIES and connected it and I am getting the dreaded " Reconnect device in Samsung Kies (PC Mode)" and it tells me to disable usb debugging. I have verififed that PC debugging is off and reinstalled Kies but still I get the same message. My usb mode is MTP... Any suggestions? I have tried different usb ports as well with no luck. Is anyone using Kies?
Click to expand...
Click to collapse
when your phone is connected to your pc in devicemanager you must see: samsung android ADB interface(screenshot attached)
when not you can find the usb drivers here: http://down-load-drivers.blogspot.nl/2013/05/samsung-galaxy-s4-drivers.html
astraopcuser said:
when your phone is connected to your pc in devicemanager you must see: samsung android ADB interface(screenshot attached)
when not you can find the usb drivers here: http://down-load-drivers.blogspot.nl/2013/05/samsung-galaxy-s4-drivers.html
Click to expand...
Click to collapse
Thanks, the device currently comes up as a SAMSUNG SGH l537 I tried running the mini kies setup and the driver installation which oddly failed. Would you be able to give me the exact driver that yours is using. I cracked open that installer and the drivers are all there I should be able to force it to the right one.
mcsephoenix said:
Thanks, the device currently comes up as a SAMSUNG SGH l537 I tried running the mini kies setup and the driver installation which oddly failed. Would you be able to give me the exact driver that yours is using. I cracked open that installer and the drivers are all there I should be able to force it to the right one.
Click to expand...
Click to collapse
only the first day i bought my gti 9505 lte i updated my device via kies. after i rooted my s4, i never use kies.
After connecting my device the first time to my laptop, kies recognized my phone automaticly.
If there is an update for Kies, the program should recognize your device and install the right drivers.
Kies is only installed on my laptop for sync my wife's galaxy note 2. Her phone runs stock 4.1.2.
So normally must kies install the right drivers.Even for your device.
Regards
astraopcuser said:
only the first day i bought my gti 9505 lte i updated my device via kies. after i rooted my s4, i never use kies.
After connecting my device the first time to my laptop, kies recognized my phone automaticly.
If there is an update for Kies, the program should recognize your device and install the right drivers.
Kies is only installed on my laptop for sync my wife's galaxy note 2. Her phone runs stock 4.1.2.
So normally must kies install the right drivers.Even for your device.
Regards
Click to expand...
Click to collapse
I think having a 64bit OS in win7 might be part of the issue as well. I probably don't need kies at all but I thought it would be nice to add contacts via outlook. My contacts are all sorts of hosed up, I exported them to a csv from my atrix and imported them into outlook. The next step was to import them with Kies which I thought would be a no brainer. oh well, hopefully the kies wifi will work when i get home.
mcsephoenix said:
I think having a 64bit OS in win7 might be part of the issue as well. I probably don't need kies at all but I thought it would be nice to add contacts via outlook. My contacts are all sorts of hosed up, I exported them to a csv from my atrix and imported them into outlook. The next step was to import them with Kies which I thought would be a no brainer. oh well, hopefully the kies wifi will work when i get home.
Click to expand...
Click to collapse
My laptop runs windows 7 64 bit too. I had no issue.
Maybe you find the solution on zedomax's site: http://androidroot.org/videos.php?cat=90&sort=most_recent&time=all_time&seo_cat_name=
regards
mcsephoenix said:
I just got my S4 and I wanted to connect to Kies via a usb cable at work, no wifi available. So I installed KIES and connected it and I am getting the dreaded " Reconnect device in Samsung Kies (PC Mode)" and it tells me to disable usb debugging. I have verififed that PC debugging is off and reinstalled Kies but still I get the same message. My usb mode is MTP... Any suggestions? I have tried different usb ports as well with no luck. Is anyone using Kies?
Click to expand...
Click to collapse
All drivers where installed correctly ??? yesterday i got the same error and used w7 update to find the missing driver. Works fine now.
Still no luck, unfortunatly at work windows update is blocked so that is not an option here as far as the driver update.
After the OTA to 4.4 when i connect my S4 i9505 on an USB port windows didn't recognize the hardware and driver installation will fail.
on a clean (formatted) pc, I've installed KIES but the problem still the same.
Note: The charge battery works fine... so I guess it's a software problem, I hope
Hello everyone , my computer doesn ' t detect my samsung a5 , i tried installing kies 2 and 3 and installing samsung usb drivers but still nothing , when i plug it the phone starts charging but it doesn t show on the computer , any ideas about what i should do ?
thank you