Database Users

AD SD Booting not working :(

Hello,
I have installed Magldr 1.3 + NANRDOID MDJ 2.6 ..
I am unable to go to the boot from ad sd option ... As in if i have to update any .zip file .. and I choose the option for ad sd boot .. it will get stuck in GO GO GO screen ..
Please help me ..
I have used task 29 and installed everything again ..
NOTE : I have installed a new sd card and updated the recover_250 file also.
Thanks ...

Have you installed a CWM 1.3 partition? You need to flash a partition from here to provide you with CWM Recovery. I know you say you have a recover_250 file, but is it the latest version?
To go to CWM you need to select the AD Recovery option not Boot AD SD.

ClydeB1 said:
Have you installed a CWM 1.3 partition? You need to flash a partition from here to provide you with CWM Recovery. I know you say you have a recover_250 file, but is it the latest version?
To go to CWM you need to select the AD Recovery option not Boot AD SD.
Click to expand...
Click to collapse
Thank you for the reply.
Yes i have installed the latest version1.3 only and I am talking about going into the option for BOOT AD SD .... I want to install another ROM ...
and when i click the BOOT AD SD option .. it will get stuck in the GO GO GO screen ...
I hope i am able to explain my situation ...

When i go to BOOT AD SD option in MAGLDR V1.13 .. it says ..
SD KERNEL OPEN FAILED

Its working now
Thank you

ajsam4u said:
Its working now
Thank you
Click to expand...
Click to collapse
how did you solve this problem because am having the same problems, pls help me out.

mikeysho said:
how did you solve this problem because am having the same problems, pls help me out.
Click to expand...
Click to collapse
If you are using magldr 1.13 with cwm 1.3 partitions you no longer go to Boot AD SD. To enter CWM you need to go to AD Recovery on magldr menu.

I had the same problem.
but now i have another problem which recovery should i take? 150 250 400???
greetz

nummrt47 said:
I had the same problem.
but now i have another problem which recovery should i take? 150 250 400???
greetz
Click to expand...
Click to collapse
This depends on what ROM you want to install using CWM. A large ROM like a Desire HD build requires more then a light ROM with only the essentials baked in. If you really aren't sure what to flash just check the guide accompanied with the ROM.

does this mean that I have to install CWM every time i want to install another ROM??

nummrt47 said:
does this mean that I have to install CWM every time i want to install another ROM??
Click to expand...
Click to collapse
Technically, no. Not unless the partition layouts for the different ROM's you are trying are different and in turn they require you to run DAF (which re-partitions your NAND storage).
If they are the same then your partition layout won't be changed and your recovery partition, which is where CWM resides, won't be affected at all when switching ROM's.

but i could also install the biggest one(400) and everything would work because I can't have a too small partition???
could that work??

[Q] Error while trying to boot into Recovery. HELP please! :(

My HTC HD2 won't boot into recovery it displays "ERROR: ERROR: Invalid boot image header"
Can't seem to solve it, help would be much appreciated...
Thanks

What exact Clockwork Mod Recovery did you flash to you're HD2? As there is two was of installing it and two ways of booting it.

I'm in the same problem, i upgraded ROM Manager from market and then reflashed recovery from rom manager, from which we can find HTC HD2 listed now, and when i entered recovery, same error appears: Invalid boot image header. Please help us. Before this upgrade, i have reflashed recovery using Desire HD listed with no problems at all.
Edit: i have to reflash selecting DESIRE HD and had to reflash the whole Hyperdroid GBX v12 build to fix it.

Yes, i have the same issure. After the upgrade to v4.0.0.6 from market and selection for recovery CwM for HD2 i was unable to boot in this partition.
I´ve tried to install all older versions 3.0.0.5 and 3.0.0.6 (new one is 3.0.2.5) but it seems, that the recovery system is now demaged.
Also the selection for recovery CwM Desire and Desire HD does not run
Please help...iam not able to flash a new system anymore without lose my data

Hi! Same here.. please help!!
PG

tberndt said:
Yes, i have the same issure. After the upgrade to v4.0.0.6 from market and selection for recovery CwM for HD2 i was unable to boot in this partition.
I´ve tried to install all older versions 3.0.0.5 and 3.0.0.6 (new one is 3.0.2.5) but it seems, that the recovery system is now demaged.
Also the selection for recovery CwM Desire and Desire HD does not run
Please help...iam not able to flash a new system anymore without lose my data
Click to expand...
Click to collapse
Try reflashing Recovery, i use 150M_recovery, then reflash your build. That should help. I think it's the only way to fix it, at least worked for me.

Traukoman said:
Try reflashing Recovery, i use 150M_recovery, then reflash your build. That should help. I think it's the only way to fix it, at least worked for me.
Click to expand...
Click to collapse
Thanks
Yes, thats the problem...when i reflash with recovery_150M i lost my data, because this prepare a new partition layout.
If i do it, i have the CwM Recovery system, but no android anymore

polskiii said:
My HTC HD2 won't boot into recovery it displays "ERROR: ERROR: Invalid boot image header"
Can't seem to solve it, help would be much appreciated...
Thanks
Click to expand...
Click to collapse
Hi,
I had the same problem.I think the new ROM manager is currently only working with CLK.That's why it's screwing up our MAGLDR.
I'm going to try loading it back manually from this thread:
http://forum.xda-developers.com/showthread.php?t=987531.
I will report back.
(EDIT)
Yup ,it worked fine.
Used "magldr_recovery_3.0.2.5.zip" For MAGLDR 1.13, booting from NAND.
It updated to 3.0.2.5,then I restored a previous backup.
Everything back to normal.

Thanks malybru for this help
yes, that works fine, but i lost my data.
For the future... i have to make more backups before i update to a new version of CwM
Thorsten
(EDIT)
Nooooo....i have the same issure again.
After flashing the new recovery system and backup, i´ve installed the CwM Update from market.
The same again...
i think its an issure of CwM :-(

tberndt said:
Thanks malybru for this help
(EDIT)
Nooooo....i have the same issure again.
After flashing the new recovery system and backup, i´ve installed the CwM Update from market.
The same again...
i think its an issure of CwM :-(
Click to expand...
Click to collapse
Hi,
What "CWM UPDATE" from market did you install?

malybru said:
Hi,
What "CWM UPDATE" from market did you install?
Click to expand...
Click to collapse
I wanted the last one v4.0.0.6
I have actually the ROM Manager Premium v3.0.2.0
After your hint its the 3.0.2.5 CwM Recovery System

tberndt said:
I wanted the last one v4.0.0.6
I have actually the ROM Manager Premium v3.0.2.0
After your hint its the 3.0.2.5 CwM Recovery System
Click to expand...
Click to collapse
It's ok to go to market and type ROM manager and update it.
However,do not use the program if you have MAGLDR,because it will not work,yet.
At the moment ,it will only work if you have CLK installed.

Solved my issue.
I thank you all for your efforts, much appreciated!
A few hours after panicking i just reflashed the 400MB system partition and everything was totaly fine.
Since a day I'm running MIUI 2.3 and it is really something
Greets,
Polskiii

My issue solved.
I thank you all for your efforts, much appreciated!
A few hours after panicking i just reflashed the 400MB system partition and everything was totaly fine.
Since a day I'm running MIUI 2.3.3 and it is really something else
Greets,
Polskiii

malybru said:
It's ok to go to market and type ROM manager and update it.
However,do not use the program if you have MAGLDR,because it will not work,yet.
At the moment ,it will only work if you have CLK installed.
Click to expand...
Click to collapse
Okay, tnx...
Maybe it's the best to install clk, it's solves another problem with the directly cwm recovery ;-)

tberndt said:
Okay, tnx...
Maybe it's the best to install clk, it's solves another problem with the directly cwm recovery ;-)
Click to expand...
Click to collapse
Hi,
If you want a push in the right direction,this was the advice given to me.
http://forum.xda-developers.com/showpost.php?p=13024428&postcount=13
Good luck.

malybru said:
Hi,
If you want a push in the right direction,this was the advice given to me.
http://forum.xda-developers.com/showpost.php?p=13024428&postcount=13
Good luck.
Click to expand...
Click to collapse
Member zach.anger did a good job in that post instructing on the proper ADB commands to type in. But Icwas pointed to a very good guide by senior member arif-ali, who is one of the main developers that worked and is still working with cedesmith to get cLK perfected, which it is pretty much close to that now. Anyway he directed me to senior member stirkac's really good guide. You can find it at the link below. Thought I would share it with everyone as it is kinda barrier in the cLK thread.
http://forum.xda-developers.com/showpost.php?p=12327648&postcount=844

Ari Alif has released the ultimate Magldr Recovery solution for this issue, her it is:
http://forum.xda-developers.com/showthread.php?t=987531&page=44

malybru said:
Hi,
What "CWM UPDATE" from market did you install?
Click to expand...
Click to collapse
The same exact thing happened to me with both of my HD2s, I quickly figured that there is an issue. So the solution was to to ref lash everything and reload a previous backup.
Go here and follow each one accordingly for MAGLDR or cLK:
http://forum.xda-developers.com/showthread.php?t=933951
Clean Install MAGLDR:
1. Task 29
2. Flash Radio(2.15 Recommended)
3. MAGLDR 1.13
4. MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5)
5. Install TyphooN CyanogenMod 7 .zip with CWM
Clean Install cLK:
Follow Charmacas's tutorial
[email protected]

Nand kernel open failed

Someone help me please...I was trying a different Kernel to try something out which didnt work. So when I went to reinstall my original Kernel i'm getting a Nand kernel open failed message. As far as I know Im doing everything correct as Ive always done when installing zips.
1. power down
2. on Clockwork choose opt 8(ad recovery)
3. I choose install zip from sd card
4. I choose my zip
5. After the zip installs I rebbot then i get this message on my mgldr screen.
Can somneone tell me what mightve went wrong...im fraking out. Im running Coredroid 1.6 and trying to re-install my rafipgna 1.9

Mods please delete. Fix Found...

what was the fix?

bx10r said:
Mods please delete. Fix Found...
Click to expand...
Click to collapse
I have exactly the same problem. What was the fix please?

nand kernel open failed
you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android

musashiz said:
you are probably putting the 'clk' version of the rom in your storage card for installation. you need the 'magdlr' version of the rom for clockwork mod to correctly install android
Click to expand...
Click to collapse
Wow I cant believe this worked. You have 2 recoveries, MAGLDR and CLK. So one would think you use the CLK rom with the CLK recovery, and the MAG rom with the MAG recover.
NOPE!!
You use MAG rom on CLK recovery. Jesus christ I spent 3 hours on this.

[Q] please help regurding the clock work mod recovery

Hello every one. im using hyperdroid cm7 rom, i just flashed it two weeks ago with the MAGLDR 1.13 and the clock work mod v1.3_150MB but now im having a problem with clock work mod recovery and that is when i try to load the clock work mod recovery it says "invalid image" something like that and it dosent load the clock work mod recovery and goes back to the MAGLDR1.13 menu so how i should deal with it should i re-flash the clock work mod 1.3_150mb recovery? and if i do this will i have any problem with the rom or will lose any thing? please help me and thanks in advance to all.....

Wow 40 views not a single reply i think i asked a wrong question....

I would reinstall CWM. Be sure to install the CWM recommended by the Rom's chef as they can be different partition size. You should not loose your data by reflashing CWM. I believe the partition you are looking for 150M. Here is a link: http://www.multiupload.com/41E9UMRO45

Yea re flashing cwm will wipe all the nand partitions because they are all re created empty. If you have been using an ext partition you can save the contents of that, I.e your installed apps, , and if the rom you were on put the whole data part there you can maybe save your data too, tho I suspect you will have to bite the bullet and start from scratch.

samsamuel said:
Yea re flashing cwm will wipe all the nand partitions because they are all re created empty. If you have been using an ext partition you can save the contents of that, I.e your installed apps, , and if the rom you were on put the whole data part there you can maybe save your data too, tho I suspect you will have to bite the bullet and start from scratch.
Click to expand...
Click to collapse
sam thx but my question i dont have an ext partition for the apps so if i re flash the 150 partition of cwm will i lose roms data and will i have to reinstall the rom again? and by doing this is there any chance bricking the hd2? what should i do please recomand.

michdj00 said:
I would reinstall CWM. Be sure to install the CWM recommended by the Rom's chef as they can be different partition size. You should not loose your data by reflashing CWM. I believe the partition you are looking for 150M. Here is a link.....
michdj ya i was recommended to use the 150 partition but im afraid to reflashing it what if i lose all the rom data and brick my hd2.....
Click to expand...
Click to collapse

I do not really understand your problem...
Why do you go into CWM if you already loaded the ROM and using it successfully?
What do you want to do??
To get to CWM, go to Magldr select option 5 I believe (Recovery) press GREEN (call) button and you'll get CWM menu.
Does that answer your question?

Recovery is option 8.
I assume the issue was created be cause you tried ROM Manager with MAGLDR, it will mess up your phone. (use ROM Manager only with cLK Bootloader)

thanks
Tester30 said:
I do not really understand your problem...
Why do you go into CWM if you already loaded the ROM and using it successfully?
What do you want to do??
To get to CWM, go to Magldr select option 5 I believe (Recovery) press GREEN (call) button and you'll get CWM menu.
Does that answer your question?
Click to expand...
Click to collapse
tester30 basically i needed to update a fix for the rom and it has to be done by loading into the cwm so when i got the fix from the rom thread i tried to load the cwm and i face the problem....

thanks
Marvlesz said:
Recovery is option 8.
I assume the issue was created be cause you tried ROM Manager with MAGLDR, it will mess up your phone. (use ROM Manager only with cLK Bootloader)
Click to expand...
Click to collapse
Marvlesz i think u r very right actually i did a the "fix permission" in the rom manager and also pressed "backup rom" in the rom manager menu.I did it because in the rom manager it sayas clearly that backup using clock work mode so i thought of doing that what should i do now please help me out

sandb said:
Marvlesz i think u r very right actually i did a the "fix permission" in the rom manager and also pressed "backup rom" in the rom manager menu.I did it because in the rom manager it sayas clearly that backup using clock work mode so i thought of doing that what should i do now please help me out
Click to expand...
Click to collapse
it would be better you flashed mgldr and cwm partition and install the rom again.

mutil said:
it would be better you flashed mgldr and cwm partition and install the rom again.
Click to expand...
Click to collapse
i guess i have to do it.thanks for the info multi.

[Q]Magldr. Intall An android ROM over an other Android ROM

Hello, i have htc hd2 and i already intallled this ROM:
http://forum.xda-developers.com/showthread.php?t=1209474
Now, i want to update this ROM to this one:
http://forum.xda-developers.com/showthread.php?t=1662881
But i dont know how, i have magldr installed on my device, 2.08 spl and the proper radio. I dont really know if i first have to uninstall the current android i have(i dont know how either) or if i just flash it on top of it. Another question i have is how to flash a rom that comes on a zip file from magldr. Because i installed the android that i currently have with an .exe that came inside the rom i downloaded.
Thanks, i hope i can get this solved asap.

You don't need to uninstall your current ROM, but you have to install CWM first with the correct partition size. After that, boot into cwm by selecting option "8. AD Recovery" and then "install zip from sdcard" and choose the ROM you downloaded as a .zip .. and you should be good to go.
If you need elaboration, you can follow this tut: http://forum.xda-developers.com/showpost.php?p=16528026&postcount=7
Keep in mind you have to modify "Step 8" & "Step 10" according to your ROM.

Also, if you installed your first rom using daf.exe some time ago there's a good chance you don't have magldr 1.13.
You can tell by looking at the magldr menu screen at the top, or by looking at option 8,, if option 8 ISN'T "ad recovery" then you need to upgrade magldr. (Well, technically you don't, but its way easier if you do)

Marvlesz said:
You don't need to uninstall your current ROM, but you have to install CWM first with the correct partition size. After that, boot into cwm by selecting option "8. AD Recovery" and then "install zip from sdcard" and choose the ROM you downloaded as a .zip .. and you should be good to go.
If you need elaboration, you can follow this tut: http://forum.xda-developers.com/showpost.php?p=16528026&postcount=7
Keep in mind you have to modify "Step 8" & "Step 10" according to your ROM.
Click to expand...
Click to collapse
I installed my previous rom with daf.exe. I have to install CWM now, i have magdlr 1.13, so i can do it. But i read this:
"WARNING MESSAGES:
GOING FROM A DAF FLASHED ROM TO A RECOVERY FLASHED ROM WILL WIPE ALL DATA
IF YOU FLASH ANOTHER ROM USING DAF, RECOVERY WILL NO LONGER WORK CORRECTLY, YOU WILL NEED TO REFLASH RECOVERY"
I didnt understand what it meant with "wipe all data". Is there any chance to brake my device?
Thanks

It just means that the apps and data on your current ROM will be deleted (SD card will not be affected). You can use an app like Titanium Backup to backup your apps and app data then restore them after flashing a new ROM.

I already flashed the rom succesfully, thanks for the help

flashed but reboot failed
Flash was successfull, but first reboot failed. Phone shows the cyanoGen mod figure with an arrow turning around it for ages.
Any ideas how to make it working?
bocacapo123 said:
I already flashed the rom succesfully, thanks for the help
Click to expand...
Click to collapse

keep_touch said:
Flash was successfull, but first reboot failed. Phone shows the cyanoGen mod figure with an arrow turning around it for ages.
Any ideas how to make it working?
Click to expand...
Click to collapse
Make sure you setup your partition perfectly as the OP said for your ROM,if u new on this just grabed HD2 Toolkit,try to start all over again.
but if you have settle up your partition perfectly try to go to recovery wipe cache,than wipe dalvik cache and reboot,see if this working,good luck
Long Live HD2,Long Live Rock'n Roll!!