Related
ok..im new to the galaxy and android phones .. i bought the phone rooted..not sure all what it had but i was running i believe a different rom on the phone, 2.1 update 1 i believe, it had rom manager and clockwork recovery on it, anyway .. i tried doing the lag fix and now the phone just turns on and stays on black screen.. keys at the bottom stay lit up also.. i can get into recovery but not really seeing anything in there that is helping.. can i factory reset or something from this recovery screen? like i said im not real familiar with these phones but im good with directions so if someone can explain how to fix this that would be great! thanks!
Hi, did you try using odin to flash back to stock?
the files you need to flash are in this thread
forum.xda-developers.com/showthread.php?t=734475
Also make sure you have samsung drivers installed on your computer. Which can be located here forum.xda-developers.com/showthread.php?t=728929
A stable version of odin is in this thread
forum.xda-developers.com/showthread.php?t=790026
steps
1. you will need to download odin..open it
2.Make sure your phone is off. connect your phone via usb and get into download mode(hold the volume keys+power when screen turns black let go of power button) now you should see a yellow triangle with android icon
3.to make sure your comp recognizes the phone.. pull out usb and put it back into the phone.
4. look at the first link i posted and flash the files accordingly and you should be good to go.
ok..i will try it. unfortunately i use my phone to tether so now im back on my blackberry which is SLOW.. odin is saying like 4hrs to download..loL!
I had the same issue. It sounds like you didn't install a BusyBox version that has extfs support built in. I could swear that the lag fix option I pulled down was supposed to have it, but it didn't. If you made a nandroid backup before you tried this, you should be able to get into recovery and restore. If not, you'll have to get to download mode and Odin flash back to stock.
If your phone is hardware locked, with the state your phone is in, you SHOULD be able to do an "adb reboot download" or "adb reboot recovery" to get into those modes.
Hello XDA-devs forums,
I'm having an issue since yesterday.
I have rooted my Huawei Ideos X5, and it ran fine for a day or so.
However, when my battery ran out it shut down into a completely blue screen.
When I tried booting it again, this just showed me a blue screen as well.
Now, I fixed this issue by connecting the phone to my PC after booting it with the Vol+ and Vol- pressed.
(So you get the pink/purple screen)
However, when I opened the phone on my PC, all I saw was a "239 MB" "empty" space, and it should have ~2GB..
I placed a backup copy I saved of my "image" folder in that 239 MB storage, and it booted.
However, today I hooked it up to my PC again to see if it magically changed..
And I couldn't access the 239 MB space anymore.
When I tried fixing the issue with a reboot of the phone, that just caused it to get stuck in a booting loop.
So now I'm stuck with a phone that keeps trying to boot itself,
and I can't access it on my windows PC.
I can, however, access 4 different folders of the phone on my linux notebook.
Now, my question is: can someone with a good understanding of problems like these please help me out?
I'm getting kind of fed up with it, as I've only got the phone for 2 days now.
Thank you in advance, and thank you for taking the time to read this.
Have you tried removing the battery for 5 minutes and then putting it back in?
After this, what happens when you press VOL+ and Power?
How about if you press VOL+, VOL- and Power, without the USB cable?
Hello Katu, thank you for posting.
Regarding your questions:
Yes, I have tried to take out the battery for 5+ minutes- it didn't change anything to the situation unfortunately..
If I press VOL+ and Power at the same time, the device boots into recovery mode.
In this I have tried to format the device in order to reset it to factory defaults, but this did not help either.
When I press VOL+, VOL- and Power, the phone boots into the pink/purple screen.
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
PlanDreaM said:
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
Click to expand...
Click to collapse
Well, I used an original ROM:
U8800 V100R001C00B136(Overseas General version)
And that resulted in the boot.img being corrupted, so I can't even overwrite that anymore.
Also, this is what I see when I hit VOL+, VOL- and Power at the same time to boot into safe mode, and connect it to my PC.
img69 [dot] imageshack [dot] us/img69/244/10101191548pm.png
julle131 said:
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
Click to expand...
Click to collapse
I installed the official B136 rom, and after it rebooted, it would just hang on a black screen.
(it used to show the IDEOS or Android logo when it booted)
Hmm mine came with this Rom
U8800 V100R001C00B135SP01 ( general )
Looking at your name you're from the Netherlands ( so am I )
where did you get this 136 version from ?
I would try to put this one on it
You have to put the 'dload' folder into the root of your SD Card,
then boot into boot-loader, after that it'll automatically flash back to the stock Rom.
1 Format SD card
2 On the SD card, create "dload" folder
3 Put the unzipped Rom into "dload" folder
4 Then boot to bootloader (pink screen)
Yes, mine came with that version as well.
However, I couldn't find it anymore and thus downloaded the version I said earlier.
Also, I did everything as you described, except step 4.
You have to boot to recovery instead of bootloader. (VOL+ and Power)
Anyways, I managed to get ClockworkMod's recovery.img on my phone,
and from there on install a custom ROM on the phone, which magically got it working again - even though it didn't work earlier.
Thank you for reading my thread and taking the time to reply to it.
My issue has been resolved.
just for the record, flashing a stock rom is different from flashing a custom rom..
the 4 steps described by Gman2oo6 is the correct way to flash a stock rom (and it is written clearly in the document that is in the stock rom zip file)
[edit]
step (1) is not a necessary step though..
Yeah, I noticed that.
What I did was format my SDcard with FAT32,
and put a custom rom (update.zip) on the SDcard.
I then booted ClockworksMod Recovery and installed the custom rom from the SDcard.
When I tried installing the stock rom, I just followed the PDF file's instructions that came with the stock rom.
hey i udated to GB 2.3.4 (official)and i didnt like the it cuz the wifif ddnt work and the bluetooth also the DATA so itryed to downgrade to 2.2.2 original official and it did the 2/2 steps intalled and when it restarted it did not want to turn on all that happened was it vibrated and thats all so i left it on like that and when the battery died i plugged it in to the AC and the LED turned on red and the touch kkeys also but not the screen so i really NEED help!
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
i tryed it
nope nothin good happened all that happens is a blank screen with nothin on ,LED is off and the touch keys are off. it justz vibrates and when i put the battery it turn the LED on to red and the touch keys turn on but then like 5 min later the LED and keys turn off
astewart said:
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
Click to expand...
Click to collapse
ok heres what i did i wanted to upgrade my phone to the newest version GB 2.3.4.So what i did was download the update and i followed the installation steps i successfully updated to Gb 2.3.4. so like i was checking how it look and the new feature but when i wanted to go on the android market i went to setting and turn on the wifi and it said Error and then i tried the Bluetooth and it said Error also so then i put my SIMs card in and i was like imma use DATA then and when i restarted my phone it had service but no HSPA+ or Edge or GPRS so like i just hatted my phone from their so then i was trying to root it but iddnt know how to do that so like i read this website and i got the UPDATE.APP or 2.2.2 AT&T did the same steps of the installation of BG 2.3.4 and it went to the process and 1/2 stepp good it passed and then 2/2 also passed it installed it and when it said Successively Installed it said Restarting and the scrren turn of and it vibrated and thats all that happened and i left it like that for the whole days and nothing happened
Do u got any idea?
When i connect it to my laptop it says installing drivers .then its says sucesfully installed drivers ready to use. so then i got to Device Manger and i check what has been installed and their it said USB Human interface device and HID-compliant device WHAT DOES THAT MEAN??
Not sure about the HID (human interface device) probably just the way windows sees the device for interfacing with it. With regards to the not booting I have read a lot of people saying that you need to factory reset and clear cache after the upgrade/downgrade. With the phone off, turn it on by long pressing volume+ and power on button till you get the blue recovery screen and from there you can reset factory/ data and also clear the cache. from what I see this should clear up the problem and start up. Please read this thread, it may help you somehow..... http://forum.xda-developers.com/showthread.php?t=1420728
Hope this helps a little
U mean Boot recovery and imma try it and thanks ill check it out
Sent from my MB300 using XDA App
all that i know is that if u customized your partition, it'll bootloop,
so go back to stock-partition ^^
How do I do that got like the steps or video?
Sent from my MB300 using XDA App
when i downgraded to 2.2.2 i installed this V100R001C00B138SP04CUSTC185D002
http://forum.xda-developers.com/showthread.php?t=1251250 got it from that link
Looks like you are not having much luck. Did you try to factory reset?
astewart said:
Looks like you are not having much luck. Did you try to factory reset?
Click to expand...
Click to collapse
well how do i do that do i need to got to the purple/pink screen or bot recovery cuz i cannot access that my phone doesn't do anything pretty much
Hi guys, recieved my phone back from T-Mobile all repaired and working again
I ran the Advanced Hack kit http://forum.xda-developers.com/showthread.php?t=1259821&highlight=ace+hack+kit, followed the instructions, it all went well, said it completed. Phone hung on T-Mobile flash screen for 15 mins. Pulled battery, powered up, hanging for another 15 mins.
Powered up into Hboot, still S-On.
I can access Clockwork recovery OK also.
Phone still hanging, so selected restore factory settings. Hangs at flash screen.
I restored my Back-up of RCMix3D (probably a bad idea, but ran out of things to try). Rebooted, hangs at T-Mobile screen again.
I'm pulling my hair out now, what can I try??
I wanted to try the Hack tool again, but it won't connect without the phone booted. Also, I tried running an RUU, again it won't run without the phone booted.
I just copied the stock T-Mobile PD98IMG to the SD card, updated, went smoothly, now won't boot at all
bumping to the top
All sorted now guys, attn1 helped me out loads last night, this guy's a genius!!
Big thanks to him for all the help, donation going his way on pay day!
Edit, a mod may as well close this
mushtafa said:
All sorted now guys, attn1 helped me out loads last night, this guy's a genius!!
Big thanks to him for all the help, donation going his way on pay day!
Edit, a mod may as well close this
Click to expand...
Click to collapse
Well,
if you talk to attn1 again, please tell him to contact me.. I'm stuck with my dhd aswell.
My problem is:
Few months ago i rooted my unbranded DHD, installed CyanogenMod 7.1, it worked perfectly fine for a couple of months, but a few days ago, my phone was on but did not respond anymore. I tried to reboot it, but it got stuck at the white screen with the HTC logo (sometimes it bootloops, other times it freezes)
I rebooted the phone with the volume down key pressed, so it would give me that menu,
scrolled down to "Recovery", i get the recovery menu from ClockworkMod, but then my volume key does not work ! i can not do whipe or anything else, the phone freezes.
I mounted the SD card in my PC, cleared it, put a rom in root of SD card and call the rom "PD98IMG.zip" and put the SD card back in my phone. I start the phone with the volume key down pressed, i get that
white screen with the menu and it then finds the .zip file.
It then reads the image, parses the image and then tries to load "NV.img" on which my phone freezes again.
I tried CyanogenMod and LeeDroid, and a stock rom. They all do the same thing, as written above.
When i connect my phone to my PC, my pc tries to install the driver, but gives me an error, saying the device is not known. I have installed both HTC Sync and the SDK. Tried it when i had only HTC Sync
installed, did not work either.
I also tried a RUU (.exe file) but this program tells me there is no device connected...
My phone is over a year old, so i have no warenty anymore, that's why i rooted it.
I can not use my touchscreen!
For days, i am trying to solve this problem, but still can not, i am really upset about that, i need your help.
Firstly, my device was D802 international and os was 4.2.2
I rooted, installed a recovery, then installed a KitKat with Twrp.
After i wanted to turn on, i realised that the touch screen was not working properly. Actually it is so bad, that you can even not enter the menu of the phone with the touchscreen.
Then i connected a mouse to phone and went to settings. Yes, it was 4.4.2.
I had to install a new rom to solve the touchscreen problem, but i couldn't, what ever i did.
With the offline procedure of Lg flash tool (in download mode), the installation stopped every time in 15% depends on a problem of usb connection.
With the online method, it said that the batery is not enough to contunie. (But it was 100%)
Than wanted to install with Twrp or cwm. I rooted, flash the recovery but can not reboot into the recovery menu of twrp or cwm. When i press reboot into recovery, it directs me to the stock recovery of the phone. (In which there is a lying android with a red triangle above it's body)
I also tried adb(from the custom recovery menu) , pc was recognizing phone but the phone was not reacting to the commands i entered from pc.
I've searced a lot in google but couldn't find a solution.
Please help. What's the problem. What can i do?
frtctf said:
I can not use my touchscreen!
For days, i am trying to solve this problem, but still can not, i am really upset about that, i need your help.
Firstly, my device was D802 international and os was 4.2.2
I rooted, installed a recovery, then installed a KitKat with Twrp.
After i wanted to turn on, i realised that the touch screen was not working properly. Actually it is so bad, that you can even not enter the menu of the phone with the touchscreen.
Then i connected a mouse to phone and went to settings. Yes, it was 4.4.2.
I had to install a new rom to solve the touchscreen problem, but i couldn't, what ever i did.
With the offline procedure of Lg flash tool (in download mode), the installation stopped every time in 15% depends on a problem of usb connection.
With the online method, it said that the batery is not enough to contunie. (But it was 100%)
Than wanted to install with Twrp or cwm. I rooted, flash the recovery but can not reboot into the recovery menu of twrp or cwm. When i press reboot into recovery, it directs me to the stock recovery of the phone. (In which there is a lying android with a red triangle above it's body)
I also tried adb(from the custom recovery menu) , pc was recognizing phone but the phone was not reacting to the commands i entered from pc.
I've searced a lot in google but couldn't find a solution.
Please help. What's the problem. What can i do?
Click to expand...
Click to collapse
You could try this. It worked for me, although, i had a different issue. My phone was not rebooting into recovery due to the "Secure Bootloader Error". Nevertheless, it installed cwm on my phone and i could boot into it. So, you can try it. It may or may not work
http://forum.xda-developers.com/showthread.php?t=2500441
Good luck !
EDIT:
UPDATED POST AT THE BOTTOM!
Hey guys,
flashed czechops CM 10.2 a while ago everything was running fine.
On Saturday i decided to let the battery drain completely to do a full recharge. That`s when the Problems started.
After booting the Phone up i was stuck in a Bootloop with the Cyanogenmod Logo turning around and around and around and so on.
Okay i thought let`s reboot and see what happens.
Still the same.
I then booted into recovery by holding the x button on the keyboard and power and then when the androind in the triangle showed up using vol + and vol - to get into recovery.
I then deleted the cache and rebooted again (No full wipe to factory default trying to avoid that).
After that the phone turned on saying Android is getting updated Updating Package x of y.
After its done its now stuck in Apps getting started.
After i found out to get to the Bootmenu i decided to check the Recovery Menu there.
I can choose between Motorola Stock Recovery (the normal one i already was on)
and Team Win Recovery.
So i choose Team Win Recovery and thought okay since its not working im gonna install the Update of czechops 10.2
Installing itself worked fine. But now im stuck in the same loops.
Currently im goind a Backup of the System with the Team Win Recovery in the hope i wont loose the data even if what im trying to avoid a full factory wipe.
What kinda poped in my eyes when i started the recovery was that it said E: Unable to locate '/boot' partition for backup.
Could this be the problem which is stopping the phone from booting correctly?
And if so how can i fix it?
Hope anyone can help me,
Kind Regards,
Invi
I had te same problem before doing a clean install.
I don't know why but, if you install the android 10.0 tezet and from there start the gapps, creating a account and installing your apps, you do not have problems to install the 10.2.
Good luck.
Sent from my A953 using xda app-developers app
jonasgitz said:
I had te same problem before doing a clean install.
I don't know why but, if you install the android 10.0 tezet and from there start the gapps, creating a account and installing your apps, you do not have problems to install the 10.2.
Good luck.
Sent from my A953 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the heads up jonas.
Unfortunately its too late its seems. My Milestone is just a stone now it seems.
After trying to install 10.2 12.03.14 and that not working correct after doing a full factory wipe i decided to install cm 11 from czechop.
Unfortunately it seems it failed.
My milestone just boots up and stops at the First Logo. No lights. No chance to get in any recovery mode except the normal one.
Bootloader was working some time but stopped cause the Battery is almost empty.
The Problem is i cant even load the Phone anymore cause as soon as i put it on a charger it boots up and wont get enough battery power to live for a few minutes.
So the only thing left working is the normal Android 3e Recovery. Hope i can do anything from there.
Don't give up.
Your problem it's normal, you fisrt need a global battery charger to recharge your battery.
After it, go to boot recovery, you must turn on the milestone holding " volume down + camera" or "volume up + camera", than you need to uses the RSD Lite to reflash your milestone 2.
Normaly, when do you came from another room, you stay in boot loop, so you need to entery in Miestone recovery, "x + volume down" than after it you do a factory reset. It will boot normaly after that.
To go to boot recovery, you must turn on.
Try harder.
(Guys, lets try to help a little)
Sorry about my poor english
I wont. Already ordered an global battery charger yesterday. In the mail from the store delivery is 7-10 Weekdays.
Good thing i have a second cellphone which i can use in the meantime.
i had a similar scenario
Invisan said:
Thanks for the heads up jonas.
Unfortunately its too late its seems. My Milestone is just a stone now it seems.
After trying to install 10.2 12.03.14 and that not working correct after doing a full factory wipe i decided to install cm 11 from czechop.
Unfortunately it seems it failed.
My milestone just boots up and stops at the First Logo. No lights. No chance to get in any recovery mode except the normal one.
Bootloader was working some time but stopped cause the Battery is almost empty.
The Problem is i cant even load the Phone anymore cause as soon as i put it on a charger it boots up and wont get enough battery power to live for a few minutes.
So the only thing left working is the normal Android 3e Recovery. Hope i can do anything from there.
Click to expand...
Click to collapse
hi, I had a similar situation to that earlier today, in that I got to the situation where on boot up I got the Motorola logo then nothing else (I was trying to install C.M. 11 from 10.2 but when it went to install got a message E;// error - verification signature installation aborted), after major panic thinking I'd bricked my milestone, I tried starting the phone in bootloader mode (press camera, volume up and power buttons at the same time) which gives a black screen saying boot loader 70.13 and towards the bottom says boot menu, connect USB, then on your pc find program MOTOROLA SOFTWARE UPDATER (hope you've got it) open the program, it'll say connect a device plug your phone in and let it do it's stuff, takes about an hour (charge your battery using a desktop battery charger beforehand) and your phone will be returned to the stock Motorola rom but at least your phone isn't a brick and you can always start again trying cyanogenmod.
hope this helps
mark13_2001 said:
hi, I had a similar situation to that earlier today, in that I got to the situation where on boot up I got the Motorola logo then nothing else (I was trying to install C.M. 11 from 10.2 but when it went to install got a message E;// error - verification signature installation aborted), after major panic thinking I'd bricked my milestone, I tried starting the phone in bootloader mode (press camera, volume up and power buttons at the same time) which gives a black screen saying boot loader 70.13 and towards the bottom says boot menu, connect USB, then on your pc find program MOTOROLA SOFTWARE UPDATER (hope you've got it) open the program, it'll say connect a device plug your phone in and let it do it's stuff, takes about an hour (charge your battery using a desktop battery charger beforehand) and your phone will be returned to the stock Motorola rom but at least your phone isn't a brick and you can always start again trying cyanogenmod.
hope this helps
Click to expand...
Click to collapse
So i downloaded Motorola Software Updater and RSD Lite + Motorola Device Manager newest Version
Unfortunately my Milestone seems not to be recognized by either Software updater nor RSD Lite.
In the Device Manager S Flash OMAP3630 shows up and is recognized.
Im running Windows 8.1 x64 and on a second Computer Windows 7 x64
What tool can i use ander Linux? Maybe the Phone will be recognized there.
EDIT:
K found it. Doing it with Linux at the Moment. Its working.
Only need to Root it then and after that flash my old Files and hope they are working.
At least i have an old Backup i made from Tezet before going up to 10.2 which i made with Clockworkmod
Hope it will work and not be broken like the one i made with Team Win Recovery.
Anyone knows how i can change stuff in a Team Win Backup?
Invisan said:
So i downloaded Motorola Software Updater and RSD Lite + Motorola Device Manager newest Version
Unfortunately my Milestone seems not to be recognized by either Software updater nor RSD Lite.
In the Device Manager S Flash OMAP3630 shows up and is recognized.
Im running Windows 8.1 x64 and on a second Computer Windows 7 x64
What tool can i use ander Linux? Maybe the Phone will be recognized there.
EDIT:
K found it. Doing it with Linux at the Moment. Its working.
Only need to Root it then and after that flash my old Files and hope they are working.
At least i have an old Backup i made from Tezet before going up to 10.2 which i made with Clockworkmod
Hope it will work and not be broken like the one i made with Team Win Recovery.
Anyone knows how i can change stuff in a Team Win Backup?
Click to expand...
Click to collapse
I did find it took a long time for the Motorola software updater (about 20 mins) to detect my milestone 2 (I'm using windows7 x64), I'm thinking the mistake I made when trying to upgrade to CM 11 was I didn't wipe data/cache before trying to install it
mark13_2001 said:
I did find it took a long time for the Motorola software updater (about 20 mins) to detect my milestone 2 (I'm using windows7 x64), I'm thinking the mistake I made when trying to upgrade to CM 11 was I didn't wipe data/cache before trying to install it
Click to expand...
Click to collapse
Hi mark,
well Windows popped up saying N/A
when it should show new Software.
It also couldnt recognize my Cellphone correctly it seemed.
But i flashed it with Linux anyways.
Flashing to tezet`s 10 worked also like a charm
and i could install my Backup i made in december before
updating to czechops 10.2.
Guess after i know what to do now i will try to update to cm11 now.
Invisan said:
Hi mark,
well Windows popped up saying N/A
when it should show new Software.
It also couldnt recognize my Cellphone correctly it seemed.
But i flashed it with Linux anyways.
Flashing to tezet`s 10 worked also like a charm
and i could install my Backup i made in december before
updating to czechops 10.2.
Guess after i know what to do now i will try to update to cm11 now.
Click to expand...
Click to collapse
let us know how you get on as I'm tempted to try again (I do like how CM10 gets rid of all the un-necessary apps but gives you control of all the system parameters) but want to step up to CM11 without having the same problem as before.