galaxy si9000 firmware update/debranding/3button download probs - Galaxy S I9000 General

Hi im looking for some info/help if anyone could ,it would be appreciated.,,.
I have a samsung galaxy si9000, its a replacement for a broken phone under gaurentee.
It came back branded with 3pay network and when i go to kies to update firmware it says im on
PDA:JP5/PHONE:JP2/CSC:JP5 (H3G)
and a new update aval. to
PDA:JVD/PHONE:JV5/CSC:JV6(H3G)
i was wanting to debrand it and as i can not get into 3button download mode, will this update enable it again and if so can i then debrand it with the new fimware on it.
i am not to experienced with mobile phones and wondered if anyone could point me in the right direction,.
your help is most appreciated
thank you for any input
john.
ps
when i try the 3botton fix with odin/abd
when i type in adb reboot download command it dont recognise the command ,also will the 3 button fix brick my phone if it is branded to a network ,.ie 3pay , myn phone is unlocked to any network ,..thanks again

glesgajohn said:
Hi im looking for some info/help if anyone could ,it would be appreciated.,,.
I have a samsung galaxy si9000, its a replacement for a broken phone under gaurentee.
It came back branded with 3pay network and when i go to kies to update firmware it says im on
PDA:JP5/PHONE:JP2/CSC:JP5 (H3G)
and a new update aval. to
PDA:JVD/PHONE:JV5/CSC:JV6(H3G)
i was wanting to debrand it and as i can not get into 3button download mode, will this update enable it again and if so can i then debrand it with the new fimware on it.
i am not to experienced with mobile phones and wondered if anyone could point me in the right direction,.
your help is most appreciated
thank you for any input
john.
ps
when i try the 3botton fix with odin/abd
when i type in adb reboot download command it dont recognise the command ,also will the 3 button fix brick my phone if it is branded to a network ,.ie 3pay , myn phone is unlocked to any network ,..thanks again
Click to expand...
Click to collapse
anyone help me out please will it abd brick fone if its branded ?

The first page has the three button download mode recovery jig stickie .
http://forum.xda-developers.com/showthread.php?t=819551
jje

JJEgan said:
The first page has the three button download mode recovery jig stickie .
http://forum.xda-developers.com/showthread.php?t=819551
jje
Click to expand...
Click to collapse
hi and thanx for reply, i seen the topic on jig stick but im no good with electronics ,will the abd way brick my phone ? as that way seems easaier for me ,thanx again

glesgajohn said:
hi and thanx for reply, i seen the topic on jig stick but im no good with electronics ,will the abd way brick my phone ? as that way seems easaier for me ,thanx again
Click to expand...
Click to collapse
anyone please !!!

i know im not a regular here and sem to come here for help,. but it seems to be the only place to seek help , i hope i never offended anyone here and would like a bit of help please , I am trying now to get back to
http://forum.xda-developers.com/showthread.php?t=785201&page=10
but it now tells me the page is not available can anyone help me out as i dont want to fook my fone ,. does the "adb reboot download" fix work or will it brick my fone and/or is ther another way to debrand it,. im not to good with solder and elctrical stuff,..please help me out here if u would ..yhanx again john

Related

Help wont connect to a network

i recently unlocked my phone and ive just put a custom firmware on my phone and now it wont connect to my network? doesent give me a signal or anything :/ someone help please?
thans
masterhoulahan said:
i recently unlocked my phone and ive just put a custom firmware on my phone and now it wont connect to my network? doesent give me a signal or anything :/ someone help please?
thans
Click to expand...
Click to collapse
A little more info would be nice
what firmware?
what steps did you take
easier for us to help
are you on 6.1 or 6.5
did you run communications setup again from settings?

After Unlock no wifi no bluetooth Please Help

Hi!
since 4 mouth I am looking for my solution but no success .
After unlock (by flashing phone) my acer S200 ,I get no WIFI in connection manager and bluetooth refuse connection (I get error when try connection).
I try all rom posted in this forum same result , I download original ROM (SFR),no success.Someone told me it is rom radio wish is damage ,Can someone help me with this magic rom? Please help me to get my acer working again,even if it is to pay.
dan0007 said:
Hi!
since 4 mouth I am looking for my solution but no success .
After unlock (by flashing phone) my acer S200 ,I get no WIFI in connection manager and bluetooth refuse connection (I get error when try connection).
I try all rom posted in this forum same result , I download original ROM (SFR),no success.Someone told me it is rom radio wish is damage ,Can someone help me with this magic rom? Please help me to get my acer working again,even if it is to pay.
Click to expand...
Click to collapse
what do you mean with " after unlock" ? Have you maybe buy a sim-locked acer netouch...
light_n_roses said:
what do you mean with " after unlock" ? Have you maybe buy a sim-locked acer netouch...
Click to expand...
Click to collapse
My phone is SFR sim locked!I unlock it by flashing . This happen after flash.Before flashing all was well. Can you help me sir ?

After one click odin stuk in at&t screen

I worked like this guide : http://forum.xda-developers.com/showthread.php?t=734871
then i get bootscreen of at&t and i can't get even to download mode.. can anyone please help me ? i lost
you need a usb jig to force your phone get in to download mode. You can search ebay to buy one,
Shilobeidani:
Please stop making a new thread for every challenge you need to tackle. This makes it impossible to give you help and can be treated as spamming.
Start by reading General STICKY
http://forum.xda-developers.com/showthread.php?p=20057736
Thanks bro i understand , i got so much problems ..

Help with flashing/unlocking SG4 I9505

Hello I recently bought an Galaxy S4 that is locked to an swedish operator and I am trying to unlock it by using the methods in
the SG4 unlocking guide on the forum. However I am having the problem that each time when i try to do the *#0011# and tap BACK and then TAP 1 nothing happens. So I started searching and found that my modem is to new and thats the problem why I cant acess the service mode menu.
My phone is new and it has not been rooted or anything I am currently on I9505XXUBMEA wich I´ve been told is to new modem to be able to acess the Service mode menu. So what I want to do is to try flash to an older modem and see if I can reach the menu to be able to unlock my phone.
The problem however is that I have been searching a lot and can´t find any info if i can just flash my current XXUBMEA modem to an older modem without doing any damages to the phone? Should I use the odin program to do so?
I really appriciate all the help that you guys can provide.
Best regards from Sweden
IvanTutic said:
Hello I recently bought an Galaxy S4 that is locked to an swedish operator and I am trying to unlock it by using the methods in
the SG4 unlocking guide on the forum. However I am having the problem that each time when i try to do the *#0011# and tap BACK and then TAP 1 nothing happens. So I started searching and found that my modem is to new and thats the problem why I cant acess the service mode menu.
My phone is new and it has not been rooted or anything I am currently on I9505XXUBMEA wich I´ve been told is to new modem to be able to acess the Service mode menu. So what I want to do is to try flash to an older modem and see if I can reach the menu to be able to unlock my phone.
The problem however is that I have been searching a lot and can´t find any info if i can just flash my current XXUBMEA modem to an older modem without doing any damages to the phone? Should I use the odin program to do so?
I really appriciate all the help that you guys can provide.
Best regards from Sweden
Click to expand...
Click to collapse
step 1 go to the right forum http://forum.xda-developers.com/forumdisplay.php?f=2162
I thought I was in the right section, dont really understand in wich category i should place the thread in but if any moderator sees this please move it to the right one.
Guys please help me, can I just flash back to an older modem like XXUAME2 by using the PDA function in ODIN ?

my note 3

I'm from Egypt , hello everyone :
I bought that note 3 with a good IMEI code and this version n9005xxudmj7
it keeps getting me the msg not registered on network and I have tried several networks but the same issue it keeps getting me kicked out of the network and I search for network and choose it then it cuts agian even during calls ??
pls answer me ASAP PLS .
mohammedlolo said:
I'm from Egypt , hello everyone :
I bought that note 3 with a good IMEI code and this version n9005xxudmj7
it keeps getting me the msg not registered on network and I have tried several networks but the same issue it keeps getting me kicked out of the network and I search for network and choose it then it cuts agian even during calls ??
pls answer me ASAP PLS .
Click to expand...
Click to collapse
Try another SIM Card, if you can make calls and it keeps kicking you off then it may be faulty.
thanks
radicalisto said:
Try another SIM Card, if you can make calls and it keeps kicking you off then it may be faulty.
Click to expand...
Click to collapse
i tried another one I even tried three different networks !!
and can any one help me pls to know my CSC cuz egypt is not included !!
Type *#1234# into your dial pad and post the results.
hey
there u go
thank u for helping me
AP:N9005XXUDMJ7
CP:N9005XXUDMJ7
CSC:N9005PHHNDMJ4
mohammedlolo said:
there u go
thank u for helping me
AP:N9005XXUDMJ7
CP:N9005XXUDMJ7
CSC:N9005PHHNDMJ4
Click to expand...
Click to collapse
Cannot find your CSC region,not sure why! however.. You have maybe a couple options, Reflash a new MJ7 ROM - If your phone is UNBRANDED you can try a generic Firmware.
OR
Can factory reset, wipe data and see if it fixes it.
OR
It's possible (and this actually might be the issue) that there is a hardware malfunction...
last thiing
radicalisto said:
Cannot find your CSC region,not sure why! however.. You have maybe a couple options, Reflash a new MJ7 ROM - If your phone is UNBRANDED you can try a generic Firmware.
OR
Can factory reset, wipe data and see if it fixes it.
OR
It's possible (and this actually might be the issue) that there is a hardware malfunction...
Click to expand...
Click to collapse
can u pls tell me the method to re flash my mobile ??
thank yooou
You must read on flashing guides and be 100% sure you have read and learnt everything.
I could post a How To here, but if you got stuck or made a mistake you'd have to ask here again and maybe no one would respond for a while and you would be stuck. So it's a lot easier if you try to find for yourself so you can learn it, and maybe one day teach someone else how to fix :good:
EDIT: I am not being rude by not helping, just I am trying to fix my device also after Hard brick
appreciate
can u just give me a link to my rom and I will flash it with oden ?? pls I need this
Here is the firmware files, check which one you need and flash via ODIN in PDA slot.

Categories

Resources