So I tried to SBF back to 2.3.340 like I done before and now I get stocked on the red M logo. When I try to go into recovery I only get to the exclamation point and pressing the search button doesn't do anything!!
What can I do?
Help please. I don't see an answer on the forums
Thanks
UPDATE: I had the system-only SBF. Found the SBF full and it worked.
Now try to figure how to install the zip files because my phone is not letting me
Venc said:
So I tried to SBF back to 2.3.340 like I done before and now I get stocked on the red M logo. When I try to go into recovery I only get to the exclamation point and pressing the search button doesn't do anything!!
What can I do?
Help please. I don't see an answer on the forums
Thanks
Click to expand...
Click to collapse
It sounds like you did the "system only" sbf.. Make sure it's the full sbf
Sent from my DROIDX using XDA App
bigshotrob22 said:
It sounds like you did the "system only" sbf.. Make sure it's the full sbf
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Hey,
Is it even out? I don't see it online
EDIT: I think I found the full SBF. I'll try it. Thanks
UPDATE: bigshotrob22 you are awesome!! Thank you it worked!!! Now I have to cancel my order for the replacement LOL
That happened to me. I SBF'd back to .340 and still had the Red M logo from the Gingerbread .595.
I was unable to get into recovery at all. I eneded up not having the phone for the day and did the SBF again when I got home, you can still access the bootloader, just not recovery (or atleast I was able to) to do the SBF back to .340.
You said you have done the SBF before..my issue with was I did not go into the factory recovery FIRST and wipe all data. I have since done three SBF's and wipe data (in stock recovery, not BOOT STRAP) first. I wiped data, DID NOT REBOOT device. Powered off, and went straight into the bootloader to SBF.
That seems to work for me now.
If it is the samething that happened to me...the wipe did not completely do its job. I make it a habit to wipe 3-4 times before doing anything.
try pushing the volume button up& down at the same time instead of search
Sent from my DROIDX using XDA App
Related
ok so i was using Liberty rom on my rooted droid 2 and decided to sbf it so and now im in bootloop. ive tryed to sbf it again, but nothing. i took it to verizon because my battery died and the dude took my phone and decided he would try and flash it but now in when the phones in flash mode it says its got bootloader 2.7. and before when i flashed it it said 2.3.2. so dones any one know how to fix it and anyone heard of 2.7 or did he think i had a droid 2 global or something?
Moved to general
ok its not 2.7, its 2.37
Can you get into recovery by holding x while turning the phone on? If you can, try wiping data/cache
Sent from my DROID2 GLOBAL using XDA App
i can but not into clockwork recovery, i get the ! triangle with the droid below, where can i go from there?
closedchannel said:
i can but not into clockwork recovery, i get the ! triangle with the droid below, where can i go from there?
Click to expand...
Click to collapse
After you get the triangle exclamation driod press the search (magnifying glass) on the keyboard to bring up the menu then use the volume keys to scroll and the camera button on the side to select. Wipe data and cache and you should be fine.
You won't be able to get into clockwork after an sbf until you re-root and re-bootstrap.
Sent from my DROID2
FIXED!!! thank you!!!
I downloaded maderstcok 340 and updated. I then did a factory reset and re-rooted using z4. I then tried to download the gummyjar rom using rom manager. My droid x is now stuck,on boot up,the pic of flashing 4 android figures and saying gummyjar
I suppose I need to flash back but dont k now how and need to flash from the .340
Can anyone give me detailed instructions on how to fix my X and how to flash
Try booting into moto recovery (hold down the menu button along with the power button, when the picture of the green android guy comes up, push the search button)
Do another wipe data/factory reset and reboot. If that doesnt work then you will need to sbf
Sent from my DROIDX using XDA App
SysAdmin-X said:
Try booting into moto recovery (hold down the menu button along with the power button, when the picture of the green android guy comes up, push the search button)
Do another wipe data/factory reset and reboot. If that doesnt work then you will need to sbf
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Exact.
Wipe your data and you should be good to go. Same thing happened to me with GJ 2.0.
if none of this works and you really messed up your phone msg me on AIM: XxMMZxX . I have files to unbrick your phone on .340 guarunteed to work!!!!!
smyers1012 said:
if none of this works and you really messed up your phone msg me on AIM: XxMMZxX . I have files to unbrick your phone on .340 guarunteed to work!!!!!
Click to expand...
Click to collapse
Unless this guy ^^^^ works for Verizon or Moto and is holding out on the rest of the Android community... anyone can get access to the files to unbrick your phone. Check out mydroidworld for the 2.3.32 full sbf and the 2.3.34 system only sbf. If you need more help with sbf files, post back, and myself, or one of many other people are likely to help you out.
PS... to smeyers1012...unless you have "Secret files" please just offer the help in the forum... it makes it easier for everyone =) Thank you
wb1960 said:
I downloaded maderstcok 340 and updated. I then did a factory reset and re-rooted using z4. I then tried to download the gummyjar rom using rom manager. My droid x is now stuck,on boot up,the pic of flashing 4 android figures and saying gummyjar
I suppose I need to flash back but dont k now how and need to flash from the .340
Can anyone give me detailed instructions on how to fix my X and how to flash
Click to expand...
Click to collapse
If I'm reading this correctly ??
After reloading the Market programs, if you want to stick with the full "Maderstcok SBF".
You must do a full reboot BEFORE Rooting, Rom's, breathing, Or anything else.
IMHO kick the Rom manager to the side of the road , Again IMHO.
Then do what you wish.
When I use Maderstcok's SBF I bypass the market downloads so that I can then
get to the new Rom i,m really trying to get to.
Maderstcok SBf, full reboot, Root, Rom
Wouldn't it be the home key and power, not the menu one?
billymac122 said:
Wouldn't it be the home key and power, not the menu one?
Click to expand...
Click to collapse
Yes. I may have mispoke. It is the home button
Sent from my DROIDX using XDA App
I am having issues installing the SBF for 2.2. I am getting an error message about not being able to find initialization value. Did anybody run into this error and find out how to fix it.
zax10 said:
I am having issues installing the SBF for 2.2. I am getting an error message about not being able to find initialization value. Did anybody run into this error and find out how to fix it.
Click to expand...
Click to collapse
a) make sure your sbf is good.
b) what version of RSD lite are you using on what OS?
I got the sbf from the one attached to the thread. I am using rsdlite 4.5. It is the only one that would read that the bravo was connected. I am on windows 7 starter on netbook.
Sent from my X10i TripNMiUI using XDA Premium App
zax10 said:
I got the sbf from the one attached to the thread. I am using rsdlite 4.5. It is the only one that would read that the bravo was connected. I am on windows 7 starter on netbook.
Sent from my X10i TripNMiUI using XDA Premium App
Click to expand...
Click to collapse
You might could try RSD 5.0
Although, I had problems with RSD on my WIN7 Vaio also that I could never get around so I just used an XP to do the job.
I gave up with win7 netbook. Used my XP desktop and it started and finished perfectly.
Sent from my X10i TripNMiUI using XDA Premium App
I flashed the linked version via rsd and have no launcher. It started briefly then went to black. Everything works just can't initiate anything. It said it was ready to dl an update after flash so I clicked yes thinking this might be motoblur...BUT, it's waiting for offpeak hours because I cannot turn on wifi. Any thoughts on the next step?
Also, does anyone have a link to the stock 2.1 sbf just in case? I'm kinda in need of my phone right now. thx
ctcost said:
I flashed the linked version via rsd and have no launcher. It started briefly then went to black. Everything works just can't initiate anything. It said it was ready to dl an update after flash so I clicked yes thinking this might be motoblur...BUT, it's waiting for offpeak hours because I cannot turn on wifi. Any thoughts on the next step?
Also, does anyone have a link to the stock 2.1 sbf just in case? I'm kinda in need of my phone right now. thx
Click to expand...
Click to collapse
re-download the sbf in the other thread and re-flash it. it probably flashed wrong in some minor way that is messing something up.
Nahh still black. Thanks for the thought though. At least I can receive incoming calls and everything else for now. Then use the recent calls list to dial back after calling the bravo. :/
ctcost said:
Nahh still black. Thanks for the thought though. At least I can receive incoming calls and everything else for now. Then use the recent calls list to dial back after calling the bravo. :/
Click to expand...
Click to collapse
There is no 2.1 .sbf so if the 2.2 .sbf isn't working then something is wrong. If you can, do a factory data reset and reboot and then try to flash the 2.2 .sbf. see if that works.
Thanks Mcfarmfresh. Didn't want to go that route but didn't lose anything but some texts. It got me back to factory. Will try the flash again in the am.
Ladies and gentlemen, I'm proud to announce the birth of a brand new baby FroYo. Thx again Mcfarmfresh for pushing me in that direction. With Motoblur, all I lost were apps...no biggie.
ctcost said:
Ladies and gentlemen, I'm proud to announce the birth of a brand new baby FroYo. Thx again Mcfarmfresh for pushing me in that direction. With Motoblur, all I lost were apps...no biggie.
Click to expand...
Click to collapse
Awesome! Good to hear. Glad I could help.
ctcost said:
Thanks Mcfarmfresh. Didn't want to go that route but didn't lose anything but some texts. It got me back to factory. Will try the flash again in the am.
Click to expand...
Click to collapse
HELP! I meet the same problem! How can you resolve it? Please help me!
OK I had CM7 working and then I did something stupid and bricked my phone. When I do the SBF, it goes through and then upon reboot it boot-loops. I used the SBF from the other post and am using RSD 5.0, but am not sure what else could be going wrong. I wish I could have wiped things, but when it bricked it wouldn't get to the point for me to get into recovery. I hope I didn't brick it too bad...
edit: I found a post on how to get to the recovery mode to wipe the data. If you need to wipe data after installing an sbf, press the down volume button and hold then press the power button until you see the moto symbol. after you see the exclamation point, press BOTH the up and down volume buttons together to get to the options. The last post I found was a little confusing because some people say you have to touch the bottom right of the screen, which doesn't work.
dontbejeff said:
OK I had CM7 working and then I did something stupid and bricked my phone. When I do the SBF, it goes through and then upon reboot it boot-loops. I used the SBF from the other post and am using RSD 5.0, but am not sure what else could be going wrong. I wish I could have wiped things, but when it bricked it wouldn't get to the point for me to get into recovery. I hope I didn't brick it too bad...
edit: I found a post on how to get to the recovery mode to wipe the data. If you need to wipe data after installing an sbf, press the down volume button and hold then press the power button until you see the moto symbol. after you see the exclamation point, press BOTH the up and down volume buttons together to get to the options. The last post I found was a little confusing because some people say you have to touch the bottom right of the screen, which doesn't work.
Click to expand...
Click to collapse
Did this end up working for you?
Yes it did. I am back using CM7 on my Bravo
Sent from my MB525 using XDA App
The posts relating to pushing the corner of the screen relate to Eclair, 2.1, recovery menu. Froyo, 2.2 ^ is pushing both Vol ^ and v.
I flashed to GB from stock, i went to try a fission rom, wiped data and flashed and now im stuck on M logo. Ive seen prior posts on this problem and followed instruction on loading the sbf file thru rsd lite. So i did that, it executes the whole flash process and reboots my phone and that execution goes to 100% and it tells me to power my phone up manually. Heres the problem when it rebooted my phone it got froze at logo again and i could do nothing but pull battery. So is there any thoughts or advice as to what maybe im doing wrong or another way to get my phone up and running? THANX
Also i cant boot into clockworkmod only android system recovery...is this maybe why its not working?
go into recovery and wipe data/factory reset. Then reboot.
jgraham4598 said:
go into recovery and wipe data/factory reset. Then reboot.
Click to expand...
Click to collapse
I did try that it was one of the first methods tried it didnt help...Thanks for the reply tho
Scitzo382 said:
I did try that it was one of the first methods tried it didnt help...Thanks for the reply tho
Click to expand...
Click to collapse
What version of bootloader are you on? What version of SBF are you using?
bigshotrob22 said:
What version of bootloader are you on? What version of SBF are you using?
Click to expand...
Click to collapse
Bootloader 30.04 and sbf SHADO_X6_ 2.3.34
Scitzo382 said:
Bootloader 30.04 and sbf SHADO_X6_ 2.3.34
Click to expand...
Click to collapse
I believe that's the system only. You need the full sbf file
Sent from my DROIDX using XDA App
I replied to your post in the other post... anyway, yes you need to try wiping (multiple times) and then if that doesn't work, SBF, you can find SBF downloads on site in my sig.
bigshotrob22 said:
I believe that's the system only. You need the full sbf file
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
o If you have already flashed 2.3.32, and/or have 30.04 bootloader: 2.3.34 SYSTEM ONLY SBF:
• DIRECT LINK TO SBF: http://www.megaupload.com/?d=OXK9Q1ZG
i was going by that in SystmeAdmin-X's noob to droid x post sice i had 30.04 i used system only....will it be safe to do the full 2.3.32
snwagner said:
I replied to your post in the other post... anyway, yes you need to try wiping (multiple times) and then if that doesn't work, SBF, you can find SBF downloads on site in my sig.
Click to expand...
Click to collapse
Yes im new to forums this my first posts i realized after the fact that i should started a new thread so did....thanx for the replies i have tried several wipes and tried sbf with rsd lite. i used 2.3.34 since i have 30.04 boot loader and i still got stuck at M logo...should i do full file 2.3.32 with 30.04 bootloader?
Scitzo382 said:
Yes im new to forums this my first posts i realized after the fact that i should started a new thread so did....thanx for the replies i have tried several wipes and tried sbf with rsd lite. i used 2.3.34 since i have 30.04 boot loader and i still got stuck at M logo...should i do full file 2.3.32 with 30.04 bootloader?
Click to expand...
Click to collapse
You need to full sbf in order for your phone to work. The system only wil not work if you came from GB.
Sent from my DROIDX using XDA App
bigshotrob22 said:
You need to full sbf in order for your phone to work. The system only wil not work if you came from GB.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
OK thank you i will try that right now and post results
Thanks a million times over to Bigshotrob22 and snwagner, The full file worked like a charm u guys are awesome thanks for the support i got my baby back
Scitzo382 said:
Thanks a million times over to Bigshotrob22 and snwagner, The full file worked like a charm u guys are awesome thanks for the support i got my baby back
Click to expand...
Click to collapse
No problem...For future reference if your on froyo and you do the system only sbf it will work. The reason why you had to do the full sbf is because GB changes the stock recovery and other files I can't remember off the top of my head.
Sent from my DROIDX using XDA App
I think i bricked my Droid X. i was running Rubix Focused and tryed to flash GingerAle 3.0 and now it just sits at the moto "M" logo. i can get into the recovery by pulling the battery but even after a wipe and a recovery it still just sits. did i brick it, and if so how can i fix it? please help, reletivly new to flashing roms.
P.S. I'll love you forever if i can fix it =)
now i think i really did it. I tried running a recovery image from a few days ago and now i cant get back into the recovery menu...
Sounds Like SBF Time
Sounds like SBF is going to be your friend here, if you don't know how, head to
http://forum.xda-developers.com/showpost.php?p=11118819&postcount=2
and look for "SBF: What is it, and what does it do?!?"
OK, so i SBFed the phone, got all the way through it, got to the phone is rebooting and it just sits at the Moto "M" again. did i SBF wrong or what?
EDIT: I can get into the stock recovery... sort of. i can get to the ! with the droid next to it but nothing happens when i push the search button.
hmm, I know GB doesnt use the search button to pass that, try using vol UP+DOWN at the same time. perhaps the stock recovery isn't modified from SBF?
Woot that worked. got into recovery. wiped data and tryed a reboot, got stuck at logo again. should i try flashing back to the Rubix focused i had before?
Edit: it now boots into <3e> recovery and i get the e: signature verification failed instillation aborted when i try to install Rubix or Gingerale.
You can't install a custom roms from stock recovery
Sent from my DROIDX using XDA Premium App
try doing a full wipe data/cache a couple of times. that usually works for me
Sent from my DROIDX using the XDA mobile application powered by Tapatalk
YAY
Fixed it!!! yay!! I had to flash the full SBF file, not just the system one. thanks for the help guys
thats ur best bet. full sbf
Sent from my DROIDX using the XDA mobile application powered by Tapatalk