Database Users

[Q] Help w/CM7 sd card install on new NC

Hello, Just got a refurbished NC with version 1.2 (read forever). Works great from stock system, but I'm trying to install CM7 on SanDisk 8gb card via post directions on:
[ROM][CM7] [v1.3] Size-agnostic SD Card image and CM7 installer for SD Cards
I've tried the 2 latest stable updates 7.1.0 and 7.0.3 and everything seems to install fine with the last lines saying "all steps complete...flushing caches...shutting down"
When I restart, it goes to the last 20 or so lines of the install and shuts down again (same messages at the end...all steps etc) I've redownloaded both the green 1.3 installer image and the stable roms. When I tried a "nightly" the install stopped on a line saying "looking for file starting with update..." or something like that and it sat there until I held the power button for a looong time.
I did try searching for a solution but couldn't find one like this problem. Any ideas what I'm doing wrong or not doing? Thanks
One thought...the 8gb card doesn't show what class... it only says Sandisk Micro HC

Are you certain you are dropping the CM7 files on the root of the boot partition on the SD?

You seem to describe doing it right but we need step-by-step how you get it done in order to maybe figure out where the culprit is.
I would suggest RECREATE the bootable uSD first.
Note: redownload the image file if needed.

Thanks for replying. Here's what I've done:
formatted 8gb micro via windows 7
downloaded image installer 1.3 via xda
downloaded winimage
restored sd card from image (generic...)
I saw boot disk w/4 files
downloaded latest stable cm7 and copied directly (zipped)to boot partition on sd
inserted sd in NC
it loaded and started updating for about 60 secs like mentioned above
it automatically shut down
When I restart NC, there is a quick white screen it goes to loading and redoes the last 20-30 lines of update and shuts down again. The lines go by so quick I can't read it (or more accurately remember them)
I've redownloaded both install image and stable updates with same results. When I tried downloading a niightly, the installer stopped midway with last line saying something like...looking for file starting with update...
Any help is appreciated

I have the same device as you (refurb NC 1.2 from the recent dailysteals sale) and did the exact things that you did except use win32diskimager instead of winimage, and it installed the cm7 nightly 240 without any issues. It's only afterward that I ran into trouble, trying to install gapps (read about it here: http://forum.xda-developers.com/showthread.php?t=1332441)
same device, same procedure, different results.

You might want to re-download cm7 zip file... you can use 7-zip or winrar to "Test archive" to see if it is corrupt before copying it to the boot partition of the uSD.

Like jh mentioned, I would give win32diskimager a try, there were many reported of winimage didn't work well.
Search for the win32diskimager, older version is better for some reason, 0.15 or something. If you can't find, let me know, I'll host the file.
Again, redownload all files, make sure no hiccup in the middle of downloading process.
What you did was correct, just to let you know.

Work-around works---next question
update!
I took out the micro 2gb sandisk from my phone and tried it again doing the normal install. It works! So, next question. Can I make an image of the 2gb sd and restore it on the 8gb sd and via some procedure maximize the rest of the sd?
Any ideas why 8gb didn't work in first place? I had done a full format via windows explorer before trying the first time. Even tried formatting via NC and still no luck. The 8gb was being used in my rooted Eris phone with no problems.

By any chance you got the counterfeit one? the 8GB

not counterfeit...I think...because when fully formatted it was 7.4+ gb

Found another 8gb sandisk micro and used it. Worked perfectly. I should have tried that first and saved a whole lot of time and energy! Thanks to all that chimed in with suggestions.

hmthomas said:
Found another 8gb sandisk micro and used it. Worked perfectly. I should have tried that first and saved a whole lot of time and energy! Thanks to all that chimed in with suggestions.
Click to expand...
Click to collapse
You have to use at least a class 4 card and that still works pretty pokey. I have my nook overclocked and running on internal and it is almost as fast as a stock Atrix
Sent from my NookColor using xda premium

[Q] [CWM 3.2.0.1] can't boot from MicroSD card (Nook Color)

Problem: ClockworkMod not booting from MicroSD card
What I'm trying to do: Dual-boot CyanogenMod 7 with the stock Nook Color with Cyanogen 7 on a MicroSD card, but without rooting the Nook Color.
What I've done so far:
1. Downloaded ClockworkMod 3.2.0.1 from download.clockworkmod.com/recoveries/recovery-clockwork-3.2.0.1-encore.img
2. Downloaded Win32DiskImager from launchpad.net/win32-image-writer/trunk/0.3/+download/win32diskimager-RELEASE-0.3-r27-binary.zip
3. Using Win32DiskImager, flashed ClockworkMod onto the MicroSD card.
4. Ejected MicroSD card.
5. Inserted MicroSD card into Nook Color (which is turned off)
6. Connected Nook Color to PC via USB cable
7. Powered on Nook Color
8. Watched as standard Nook Color boots. Nothing at all displays related to ClockworkMod.
Other troubleshooting thus far
a. I've gone back to step 3, used Windows 7 to just format the SD card to ensure it was blank, and then started with Step 3 again.
b. I've ensured the MicroSD card is set properly into the Nook Color.
c. I've tried holding down the power key on the Nook Color (no effect).
d. Searched these forums via its Search function, and searched via Google (most references use ClockworkMod 3.0.2.8, which a few posts mention does not work on the "blue dot" version of Nook Color.
Misc:
MicroSD card: SanDisk Type-2 4GB
Nook Color (the "blue-dot" version that starts with a 1GB partition for side-loading)
PC: Windows 7 64-bit, built-in SD card reader/writer
Any help or guidance would be greatly appreciated. Thank you.

Ynglaur said:
Problem: ClockworkMod not booting from MicroSD card
What I'm trying to do: Dual-boot CyanogenMod 7 with the stock Nook Color with Cyanogen 7 on a MicroSD card, but without rooting the Nook Color.
--- SNIP ---
Any help or guidance would be greatly appreciated. Thank you.
Click to expand...
Click to collapse
If all you're trying to do is setup a bootable SD card with CM7 on it, and retain the ability to also boot to the stock Nook ROM, try this:
http://forum.xda-developers.com/showthread.php?t=1000957

Based on "What I'm trying to do" and "What I've done so far", you are heading to the completely wrong direction.
A good thing is you had not been able to get into CwM Recovery, otherwise, you made a mess of your NC.
Just stop "what you've done so far" and follow the link that shumash provided above.

shumash said:
If all you're trying to do is setup a bootable SD card with CM7 on it, and retain the ability to also boot to the stock Nook ROM, try this:
http://forum.xda-developers.com/showthread.php?t=1000957
Click to expand...
Click to collapse
Agreed, you don't need clockwork mod for an SD card install. Follow the directions in my signature (adds some details that verygreen leaves out).

Installing image for CM7
I have a nook color that was purchased just a week ago and had 1.4.0 firmware on it. I had updated it to 1.4.1 before noticing that this particular firmware blocked the nook from being hacked. I had read in one of the threads how to revert back to 1.4.0, adding acclaim.zip file to the sd card would do the trick. I tried this and when my nook went to sleep, nothing. I ended up using the nook-complete-restore-1.0.1.zip with a clockworkmod recovery file and followed steps provided in other threads. Then I was stuck at the "n" screen and could not get any further. With an additional 8 Factory resets and doing the complete restore a second time I was able to get back to what I believe is factory. The difference is, out of the box I had 1.4.0 and now I have 1.3.0. I believe this is fine.
I am wanting to put CM7 with google apps on my nook. I have read a thread that suggested putting an agnostic size image file and when used, my 16gb sd card went down to >200 mb. What is a good image file to use for my card or what am I doing wrong? I am using Win32DiskImager to write my images. I have tried generic-sdcard.img for both 1.1 and 1.3 and the above still happens. I loose over 14gb of space.
I have downloaded the following to use once I have figured out what image to use. update-cm-7.1.0-encore-signed.zip for my CM7 and gapps-gb-20110828-signed.zip for my google apps.
Thanks for all the hard work that is put into making our nook experience the best!!!

dhed73 said:
[...] The difference is, out of the box I had 1.4.0 and now I have 1.3.0. I believe this is fine.
Click to expand...
Click to collapse
If you're installing CM anyhow, the version of B&N running is not important, correct.
I am wanting to put CM7 with google apps on my nook. I have read a thread that suggested putting an agnostic size image file and when used, my 16gb sd card went down to >200 mb.
Click to expand...
Click to collapse
Going by that name, you were doing a CM install to SD. If you'd completed that process, it would have made use of the rest of your SD card.
What is a good image file to use for my card or what am I doing wrong?
Click to expand...
Click to collapse
Are you trying to:
1. Root stock (doesn't sound like it)
2. Install CM to SD for dual boot
3. Install CM to eMMC
I have downloaded the following to use once I have figured out what image to use. update-cm-7.1.0-encore-signed.zip for my CM7 and gapps-gb-20110828-signed.zip for my google apps.
Click to expand...
Click to collapse
You might want to check out CM 7.2 RC0 Mirage (search here). It incorporated all of the fixes and some optimizations up through CM n253.

I am wanting to install CM to SD for dual boot. I have completed the process for adding the image to my card. The problem is that, after adding the image I now have 115mb on my 16gb card. If, I go ahead and install to my SD card will the space on the card be opened up or do I have to do something else?

dhed73 said:
I am wanting to install CM to SD for dual boot. I have completed the process for adding the image to my card. The problem is that, after adding the image I now have 115mb on my 16gb card. If, I go ahead and install to my SD card will the space on the card be opened up or do I have to do something else?
Click to expand...
Click to collapse
If you're getting that 115mb number from your PC card reader on Windows, that's misleading because that's just the size of the boot partition. There are other partitions on the card that take up space and are formatted to be used by CM7. Boot into CM7 on the SD card and see how much space you've got on the /sdcard partition. It should be many gb.
To see how the card is partitioned and the sizes in Windows, get Easeus Partition Master. It's free. If the last partition (the 4th) isn't fully allocated, use Easeus to do it. Don't resize any of the other partitions until you really know what you're doing.

shumash said:
If you're getting that 115mb number from your PC card reader on Windows, that's misleading because that's just the size of the boot partition. There are other partitions on the card that take up space and are formatted to be used by CM7. Boot into CM7 on the SD card and see how much space you've got on the /sdcard partition. It should be many gb.
To see how the card is partitioned and the sizes in Windows, get Easeus Partition Master. It's free. If the last partition (the 4th) isn't fully allocated, use Easeus to do it. Don't resize any of the other partitions until you really know what you're doing.
Click to expand...
Click to collapse
I have a issue with downloading cm7 on a sd card ive followed all the steps and boot it and it downloads and restarts and seems to be working but the touch screen isnt working. My nook is version 1.3 any help would be appreciated.

lesdavid said:
I have a issue with downloading cm7 on a sd card ive followed all the steps and boot it and it downloads and restarts and seems to be working but the touch screen isnt working. My nook is version 1.3 any help would be appreciated.
Click to expand...
Click to collapse
I had the same problem when I had to restore my nook color. I ran the program, in my case the nook system restore file, a second time. After I had done this, my touch screen was back working.
---------- Post added at 07:53 PM ---------- Previous post was at 07:48 PM ----------
shumash said:
If you're getting that 115mb number from your PC card reader on Windows, that's misleading because that's just the size of the boot partition. There are other partitions on the card that take up space and are formatted to be used by CM7. Boot into CM7 on the SD card and see how much space you've got on the /sdcard partition. It should be many gb.
To see how the card is partitioned and the sizes in Windows, get Easeus Partition Master. It's free. If the last partition (the 4th) isn't fully allocated, use Easeus to do it. Don't resize any of the other partitions until you really know what you're doing.
Click to expand...
Click to collapse
shumash,
Thanks..... after downloading the easeus partition file I found that you were correct and I had 14gb left over. I had a hard time booting into recovery for the google app file but, it finally happened. I am up and running and want to thank everyone for the help.

gallahad2000 said:
Agreed, you don't need clockwork mod for an SD card install. Follow the directions in my signature (adds some details that verygreen leaves out).
Click to expand...
Click to collapse
Many thanks. The instructions in your signature worked perfectly. Just curious: is there a freeware image-making software app that doesn't expire after 30 days?

booting from sd - issues with 32gb card

Trying to prepare 32gb card for nook cm7
Using verigreen's size agnostic img
Wrote it to the card using win image writer
dropped cm7 and gapps
on boot it recognizes card, makes partitions, inflats stuff everything looks ok
on reboot it does NOT boot from sd
instead goes to nook default
exact same stuff on 8gb card works fine
what gives?

I have two nooks at this point
both may have cwm recovery - i dont know how to check
(I know how to use nook, update it etc, but not sure about this cwr thingy)
one has cm7.1 on emmc
other has nook 1.2 rom on emmc
in both of them if i insert 8/16/32gb card
1) if sd card has fresh verygreen image with update...zip and gapps..zip installer kicks in and preps sd card
2) once i reboot, it ---- does NOT ---- boot from sd card anymore
All I want is bootable sd card with cm7.1 on it so that I can give it to a friend of mine
what am I doing wrong
is there a way to force nook to boot from sd card?
I think if it finds cwr on emmc and cwr on sd, it boots from emmc or something

I use win32diskimager which I think gives more reliable results.
Also you must mount the card in a PC for writing the image using a real USB / SD adapter. Using a card media slot on the PC or using another device like a phone to mount the card are known to give problems.

mrkkk said:
I have two nooks at this point
both may have cwm recovery - i dont know how to check
(I know how to use nook, update it etc, but not sure about this cwr thingy)
one has cm7.1 on emmc
other has nook 1.2 rom on emmc
in both of them if i insert 8/16/32gb card
1) if sd card has fresh verygreen image with update...zip and gapps..zip installer kicks in and preps sd card
2) once i reboot, it ---- does NOT ---- boot from sd card anymore
All I want is bootable sd card with cm7.1 on it so that I can give it to a friend of mine
what am I doing wrong
is there a way to force nook to boot from sd card?
I think if it finds cwr on emmc and cwr on sd, it boots from emmc or something
Click to expand...
Click to collapse
Only put the CM7 zip file on it for the first boot.

use easeus partition software to extend the size of the boot partition to 200 MB after you flash the card with verygreens installer, but before you put cm7 and gapps on there.
I bet you it fails to write the kernel during the install because there is insufficient space - try it again without resizing and pay attention to the readout when it scrolls down the screen, you'll see.
cm7.1 + gapps is almost your whole boot partition, for me it leaves only half a megabyte of free space - that's not enough to unpack and install what's needed.

DizzyDen said:
Only put the CM7 zip file on it for the first boot.
Click to expand...
Click to collapse
hmm, that did it

mrkkk said:
hmm, that did it
Click to expand...
Click to collapse
LOL
Sorry for the OP but also happy for you that your NC is up and running.
I keep saying many times, do it one at a time.

...........

Sorry to bring this thread back but I'm having the same problem using verygreen's tutorial on my NC 1.3. However after booting the NC I get the "cyanogen mod loading..." screen shortly followed by a blank screen (Nook doesn't turn off, though). If I remove the SD card the nook starts up as it normally would.
Followed the advice of these other members (extended partition size to 16gb/16gb, haven't installed gapps either) but I still can't get it to work.
I'm using the latest nightly release of CM7 following the link on verygreen's tutorial released on 11/23. Should I use a stable version instead?
Thanks...

emak212 said:
Followed the advice of these other members (extended partition size to 16gb/16gb, haven't installed gapps either) but I still can't get it to work.
Click to expand...
Click to collapse
There's where you made your mistake. The recommendations of the others on the forum were probably to expand the partition created by verygreen's image to something like 200MB or 250MB. The scripts in the image create and format 3 other partitions in addition to the one created by verygreen's image. When you expanded it to the full size of the SD card there was no room to create the additional partitions.
I would suggest you re-apply verygreen's image, expand it to 250MB and try again.
- Aerlock

Touchscreen Problems
Hello,
I have tried doing this several times, and I get no response from the touchscreen. Everything else works perfectly, but the touchscreen won't respond.
Please help.

Update on Touchscreen Issue
CM7 works fine off the 8GB. Is there something different you have to do to get the 32 to work?

Touchscreen Issue Explained
upthepool said:
Hello,
I have tried doing this several times, and I get no response from the touchscreen. Everything else works perfectly, but the touchscreen won't respond.
Please help.
Click to expand...
Click to collapse
From: Eyeballer:
http://forum.xda-developers.com/showthread.php?t=1030227
****BRAND NEW NOOK COLORS (Dec 2011+/Jan 2012+ are now shipping with a different touchscreen/digitizer (same as used in the nook tablet). As of now this driver is not included in CM7, you are welcome to try to flash CM7, if your touchscreen is unresponsive, restore to stock or flash CM9. CM9 will work as the driver is included.***
It appears that 7.1 works, as well as the most recent nightly from Nov.

[Q] Having trouble creating bootable sd card

Hi xda, my nook won't boot up at all after I tried to restore to stock from autonooter 1.01. I read as many threads as I could and tried to make a bootable sd from leapinLar's tips page. The stock recovery with cwr and without. I used winimage and win32. With winImage I get an error "reading from file". win32 seems to write the file but it doesn't boot up the nook. When I try and open the sd with windows to see if anything is on the sd it says "not formatted would you like to format it now". I downloaded file, unzipped, then wrote to sd. I must be doing something wrong creating the sd but I can't find any info as to what. Thanks for any help

Stjpa said:
Hi xda, my nook won't boot up at all after I tried to restore to stock from autonooter 1.01. I read as many threads as I could and tried to make a bootable sd from leapinLar's tips page. The stock recovery with cwr and without. I used winimage and win32. With winImage I get an error "reading from file". win32 seems to write the file but it doesn't boot up the nook. When I try and open the sd with windows to see if anything is on the sd it says "not formatted would you like to format it now". I downloaded file, unzipped, then wrote to sd. I must be doing something wrong creating the sd but I can't find any info as to what. Thanks for any help
Click to expand...
Click to collapse
Are you unzipping the right file? You said something about with stock recovery and without. Those are not image files that can be burned. When you unzip my image zip file, you should end up with a 300MB .img file. That is what you burn with win32diskimager. And take the card out of the PC and put it back in before you try to look at it. And be sure to use an external card reader, not one built into your PC.
Sent from my Nook HD+ using Tapatalk

Thanks Leapinlar. I downloaded your nook color emmc stock recovery zip with and without the cwr. I am using external sd reader. I downloaded and tried cwm-6.0.1.2 bootable sd zip and tried that in the nook and nothing happens. Also tried the 5.5.0.4 version too. I removed the card reader and reinserted it in the pc and when I click on the drive letter it ask me if I want to format it. I used win32diskimager and it said write successful, so I put it in the nook and then plugged nook into computer with the stock usb cable and nothing happens. If I hold the power button down the pc does ding as if when you plug in an external device. I'm either trying to burn the wrong file or I'm not making the bootable. Thank you for your help.

Stjpa said:
Thanks Leapinlar. I downloaded your nook color emmc stock recovery zip with and without the cwr. I am using external sd reader. I downloaded and tried cwm-6.0.1.2 bootable sd zip and tried that in the nook and nothing happens. Also tried the 5.5.0.4 version too. I removed the card reader and reinserted it in the pc and when I click on the drive letter it ask me if I want to format it. I used win32diskimager and it said write successful, so I put it in the nook and then plugged nook into computer with the stock usb cable and nothing happens. If I hold the power button down the pc does ding as if when you plug in an external device. I'm either trying to burn the wrong file or I'm not making the bootable. Thank you for your help.
Click to expand...
Click to collapse
You don't say, but you are unzipping those image files before you burn them, right? Should be 300MB .img file. Other than that just look at my A10 tip in my tips thread and follow exactly.
Sent from my Nook HD+ using Tapatalk

leapinlar said:
You don't say, but you are unzipping those image files before you burn them, right? Should be 300MB .img file. Other than that just look at my A10 tip in my tips thread and follow exactly.
Sent from my Nook HD+ using Tapatalk
Click to expand...
Click to collapse
Yes I did unzip the image file before I burned it. I ended up finding a cwr zip that was for a 4 gig card, probably an older way of doing it, and that worked for some reason. I did use your stock 1.4.3 zip though and all seems well. Your tips page is great, thank you, you're very helpful now I can play around and brick it again with some other stuff.

Hey guys.
I am somewhat a noob. I bought a brand new 8gb nook color from wallmart on black friday. I heard about how you can put CM onto the sd card and boot from that without altering the device itself. I have tried for HOURS to do this. I have looked up COUNTLESS walk throughs and done everything they say, done alternations, and used different cards ranging from 2gb sandisk (class 1?) to 32 gb sandisk this is a class 4. I've used winimage and burned the image to the card, then dragged over cyanogenmod and done this task in countless different ways. Every time I shut down the nook, put in the card, then re-boot, the nook does NOT boot from the card. It boots normal, then I can actually browse the card after it boots up. I have done it EXACTLY how it says here and read tutorials so its not a question of whether or not I have followed standard proceedure. My firmware version is 1.4.3. Ive searched online to this and to no avail. My sister bought the exact same one at the exact same time and it does not boot the sd either. I have done about 8 straight hours of research on this guys, so I'm no pro but I have a basic understanding of how it works now. My questions are this:
1: Did Barns and Noble put restrictions on the newest nook color or on the newest software version? And if so is there a way around this?
and
2: If NOT, is there an alternate way/installation onto the card that I can do (such as an image pre loaded with CM etc.) that I might be able to try instead of the conventional way?
Thanks guys! Sorry for the uber long post : S

ronin8knight said:
Hey guys.
I am somewhat a noob. I bought a brand new 8gb nook color from wallmart on black friday. I heard about how you can put CM onto the sd card and boot from that without altering the device itself. I have tried for HOURS to do this. I have looked up COUNTLESS walk throughs and done everything they say, done alternations, and used different cards ranging from 2gb sandisk (class 1?) to 32 gb sandisk this is a class 4. I've used winimage and burned the image to the card, then dragged over cyanogenmod and done this task in countless different ways. Every time I shut down the nook, put in the card, then re-boot, the nook does NOT boot from the card. It boots normal, then I can actually browse the card after it boots up. I have done it EXACTLY how it says here and read tutorials so its not a question of whether or not I have followed standard proceedure. My firmware version is 1.4.3. Ive searched online to this and to no avail. My sister bought the exact same one at the exact same time and it does not boot the sd either. I have done about 8 straight hours of research on this guys, so I'm no pro but I have a basic understanding of how it works now. My questions are this:
1: Did Barns and Noble put restrictions on the newest nook color or on the newest software version? And if so is there a way around this?
and
2: If NOT, is there an alternate way/installation onto the card that I can do (such as an image pre loaded with CM etc.) that I might be able to try instead of the conventional way?
Thanks guys! Sorry for the uber long post : S
Click to expand...
Click to collapse
No nothing was done by B&N. It is how you are burning the card. It will not boot in the nook unless burned perfectly. Look at my tips thread linked in my signature and read items A9 and A10.
There not any easy was not to use a bootable recovery card. Just keep trying, using different software, different cards, different PC s, different card readers.
Sent from my Nook HD+ using Tapatalk

ronin8knight said:
Hey guys.
I am somewhat a noob. I bought a brand new 8gb nook color from wallmart on black friday. I heard about how you can put CM onto the sd card and boot from that without altering the device itself. I have tried for HOURS to do this. I have looked up COUNTLESS walk throughs and done everything they say, done alternations, and used different cards ranging from 2gb sandisk (class 1?) to 32 gb sandisk this is a class 4. I've used winimage and burned the image to the card, then dragged over cyanogenmod and done this task in countless different ways. Every time I shut down the nook, put in the card, then re-boot, the nook does NOT boot from the card. It boots normal, then I can actually browse the card after it boots up. I have done it EXACTLY how it says here and read tutorials so its not a question of whether or not I have followed standard proceedure. My firmware version is 1.4.3. Ive searched online to this and to no avail. My sister bought the exact same one at the exact same time and it does not boot the sd either. I have done about 8 straight hours of research on this guys, so I'm no pro but I have a basic understanding of how it works now. My questions are this:
1: Did Barns and Noble put restrictions on the newest nook color or on the newest software version? And if so is there a way around this?
and
2: If NOT, is there an alternate way/installation onto the card that I can do (such as an image pre loaded with CM etc.) that I might be able to try instead of the conventional way?
Thanks guys! Sorry for the uber long post : S
Click to expand...
Click to collapse
Use win32diskimager instead and use an external card writer. The image is approximately 300mb with the Rev5 file. Then copy the CM10 and 2021011 GApps zips to SD card. Insert in Nook Color. Wait for setup to finish and shut down. Start Nook. Enjoy.

[GUIDE/TOOLS - NOW OBSOLETE] HDplus CM10/10.1 Easy Install Guide for Legacy SD

UPDATE 05/28/13 - Now that verygreen has changed his SD scheme to his new version, this guide should not be used on his ROMs dated 5/27 or newer. Use his new image and follow his new instructions. If you want to see the old instructions click on the Show Content button below.
Click to expand...
Click to collapse
Many users have had difficulty installing the HD+ CM10/10.1 ROMs using the Original/Legacy (verygreen) SD setup (especially Windows users). I have written this guide and have made some tools that should make it easier. No need for ADB or Linux. I have upgraded the CWM (clockworkmod) recovery to version 6.0.2.8 which includes larger fonts, a brighter screen and the ability to use the internal storage for installing zips and performing backups. It also uses verygreen's process from his early4 zip that aligns partitions at 2M. This guide and tools are for the Original/Legacy SD setup by verygreen, not the Hybrid. If you want the Hybrid, go here.
Setting up the SD
Begin by downloading the files you need either with stock or your PC. You will need my updated SD image file, attached below (do not use the early4 image from the verygreen thread), the CM ROM zip you want to install and the gapps zip to match it. Put the last two zips on your internal media sdcard built into the HD+. You can get the HD+ CM10 ROMs here and the HD+ CM10.1 ROMs here. You can get the gapps zips here, 20121011 for CM10 and 20130301 for CM10.1.
Extract the SD image zip and you will have a 117MB .img file. Burn that to your SD with Win32DiskImager in Windows or the dd command in Linux or OSX. The SD needs to be at least 4GB and preferably a SanDisk Class 4.
To use Win32DiskImager, find it on the web (here, it's free) and install it on your Windows PC. Open it (be sure to run it as administrator) and select the drive (device) that has your card reader with your SD inserted. Then in the image file box put the location where you have the extracted img file. Then when everything is set right, click on the write button. A warning will pop up asking if you want to proceed. When you have verified that you are going to write to the correct device, click on Yes. (One user overwrote their external USB hard drive by not verifying first.) If you get an error message about access denied, it means you are looking at the drive with Windows Explorer. Close Windows Explorer and try again. In fact, it is a good idea to close all unnecessary windows when burning, even your browser.
When burning is complete, insert the SD into the Nook and boot. It should boot to the cyanoboot logo and sit there for a little while while it creates the other partitions on the SD and formats CM10SDCARD. Then it will end up in CWM for HD+ Original SD. If it does not leave the cyanoboot logo within a reasonable time (it hangs sometimes), just touch the power key and CWM should come up. To use CWM, press the volume up/down keys to move the cursor and the n key to select an item. The power key is the back button.
Installing ROMs
You can use the "install zip from SD/choose zip from internal memory" option to flash the CM ROM you downloaded earlier to your internal memory sdcard. Then you can flash the right version of gapps to match your ROM.
When you reboot (you need to leave the SD in the slot), the CM ROM should start. You will need to register with Google to set up Play Store.
If you later want to upgrade your ROM to another build, download it to your CM10SDCARD partition using CM. Then boot to CWM and flash it.
Backing Up
This version of CWM lets you back up and restore your setup. You can even back up to internal memory. It does not back up /boot, but does back up /system, /data and /cache.
Swapping EMMC and SDCARD
Some users have installed CM to a small SD card and want their apps to use the large internal media storage to store their data. I have developed a couple of zips to swap EMMC and SDCARD when booted to CM so that internal memory is available to your apps to store their files. One zip will add the swap and one will remove it. Get them attached below.
These zips can be flashed with CWM but will only install to the Original SD with CM. I just fixed a bug in the rev0 and rev1 zips. If you already flashed rev0 or rev1, you need to flash the remove zip before you flash the rev2 fixed version. No need to boot in between.
With rev2, both SDCARD and EMMC will show internal media storage, as will both MTP folders. A new folder, ext_sdcard, will show the external SD media partition.
Updating earlier versions of CWM
Updating prior installs of the Original SD installation to this new version of CWM is easy. Just download the ramdisk zip file attached below and extract the file. Put your old SD setup in your PC and rename the ramdisk.cwm to ramdisk.cwm.bak. Then copy the new ramdisk.cwm you just extracted to the card, replacing the version that was there. Next time you boot to CWM, the 6.0.2.8 version for HD+ Original SD will be there.

Change Log
Change Log
05/28/13 - guide is obsolete starting with the 5/27/13 ROM
05/15/13 - removed warning, resolved
04/10/13 - added warning running CM10.1.
03/09/13 - added rev2 of the swap zip, as it failed on CM10.1
03/08/13 - added rev1 of the swap zip to fix a permissions bug.
03/07/13 - retitled thread
03/03/13 - added CM10/10.1 SDswap zips
02/27/13 - Initial posting

OP Updated

Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
For hd plus only?
Sent from my BNTV400 using xda app-developers app

Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
mrDAXpax said:
For hd plus only?
Sent from my BNTV400 using xda app-developers app
Click to expand...
Click to collapse
Yes, you can use bokbokan's hybrid image to do it the same way for the HD. And I think his standard image does it too.
Sent from my Nook HD+ running CM10 on Hybrid SD

question...
Sorry if this has been answered somewhere else but, I did this using a 32gb card and everything I running smooth. I have a 64gb card that I want to switch it out for. I know it won't be a problem doing the root and all of that again, but I was wondering if anybody knows how to change the 32gb SD card back to normal? When I stick it in my computer all it shows is the boot partition and when I try to format it, it only formats that's partition. Meaning that my 32gb card turns into a worthless 116 mb card. I've tried on windows and Ubuntu and get the same results...
So does anybody have any suggestion?

Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
startoxic said:
Sorry if this has been answered somewhere else but, I did this using a 32gb card and everything I running smooth. I have a 64gb card that I want to switch it out for. I know it won't be a problem doing the root and all of that again, but I was wondering if anybody knows how to change the 32gb SD card back to normal? When I stick it in my computer all it shows is the boot partition and when I try to format it, it only formats that's partition. Meaning that my 32gb card turns into a worthless 116 mb card. I've tried on windows and Ubuntu and get the same results...
So does anybody have any suggestion?
Click to expand...
Click to collapse
Yes, use SDFormatter free from the web. It will do it.
Sent from my Nook HD+ running CM10 on Hybrid SD

Thank you, I will try that and let you know how it works

This is probably a stupid question, but once I've got the SD card set up properly, can I then go ahead and delete the ZIP files that I've installed? Or do I need to keep them kicking around? Figure if I can free up some space, I should.

Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
stormerider said:
This is probably a stupid question, but once I've got the SD card set up properly, can I then go ahead and delete the ZIP files that I've installed? Or do I need to keep them kicking around? Figure if I can free up some space, I should.
Click to expand...
Click to collapse
You can delete them if you want, but I usually always keep them somewhere so I don't have to redownload them if I need to reflash, which very oftern I have to for various reasons. I can always delete them later if space becomes an issue.
Sent from my Nook HD+ running CM10 on Hybrid SD

leapinlar said:
You can delete them if you want, but I usually always keep them somewhere so I don't have to redownload them if I need to reflash, which very oftern I have to for various reasons. I can always delete them later if space becomes an issue.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
*nod* I meant deleting them off the SD card (should have specified). I'd be keeping them on my fileserver to ensure that I can reflash the sdcard to the same version I started with if I need to.

leapinlar said:
Setting up the SD
Begin by downloading the files you need either with stock or your PC. You will need my updated SD image file, attached below, the CM ROM zip you want to install and the gapps zip to match it. Put the last two zips on your internal media sdcard.
Click to expand...
Click to collapse
I'm confused by this, what are you referring to as "internal media sdcard"? I used win32 to burn the .img file, then booted into CWM...I'm clearly doing this wrong, because after that, the sdcard only has 117mb and no room to put ROMs on

Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
KamikazeChris said:
I'm confused by this, what are you referring to as "internal media sdcard"? I used win32 to burn the .img file, then booted into CWM...I'm clearly doing this wrong, because after that, the sdcard only has 117mb and no room to put ROMs on
Click to expand...
Click to collapse
You are doing it right. 117MB is what it is supposed to have. You do not put the files on that card. You put them on the HD+ (on the internal sdcard).
If you could see that it only had 117 MB, you were not booted to CWM, you were looking at the SD while it was still inserted in the PC. Booted to CWM means it is in the Nook.
When you insert the burned SD into the powered off HD+, then turn it on, it boots to CWM. That is what I mean by booting to CWM.
The internal sdcard means the storage that is built into the HD+ (that is why I call it internal). Boot to stock and download the files with it. They get put on the internal sdcard or "sdcard" as it is called. After you insert the burned card into the HD+ and boot to it, CWM has the ability to flash the zips by reading them from the internal sdcard built into the HD+.
Edit: I just clarified that in the OP. It is hard to anticipate how users will interpret your words in advance.
Sent from my Nook HD+ running CM10 on Hybrid SD

i dont seem to understand what file is supposed to amount to about 120mb. i extract "cm-10-20121231-UNOFFICIAL-ovation" and amounts to more than 200mb's but it also replaces other files.

Re: [GUIDE/TOOLS] HDplus CM10/10.1 Easy Install Guide and Tools for Original SD
droidbot1337 said:
i dont seem to understand what file is supposed to amount to about 120mb. i extract "cm-10-20121231-UNOFFICIAL-ovation" and amounts to more than 200mb's but it also replaces other files.
Click to expand...
Click to collapse
You do not extract the cm zip. You extract the image zip which is attached to the post. It is the one that is 120 MB and is the one you burn to the SD with win32diskimager.
Sent from my Nook HD+ running CM10 on Hybrid SD

leapinlar said:
You do not extract the cm zip. You extract the image zip which is attached to the post. It is the one that is 120 MB and is the one you burn to the SD with win32diskimager.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
thank you for the help. i appreciate it! i can now use my new HD+ (bought it last night) to its full potential.

I just wanted to say that I was suffering from the dreaded "Nook refuses to boot from the SD card" syndrome. I tried three different SD cards burned using four different computers, to no avail. Tried this patch? Worked perfectly. Thanks! :laugh:

SDXC cards viable for this use?
Well, that registration video was a real interesting bit compared to most forums I've ever used. Somebody put a lot of work into that.
I'm noticing a lot of emphasis on Class 4 cards. Impetuous sort that I am, I already obtained a Sandisk Ultra 64 GB microSDXC (Class 10/UHS 1) card for this project. Best Buy had a good deal and I was hoping to have a lot of room to work with and it wasn't clear what access to the internal storage would be available or best left alone. Has anyone had success or great problems with this card?
Other than that issue before attempting to execute the install, this is a very helpful thread. Much clearer than verygreen's original. That shouldn't be taken as an insult to verygreen as technical writing for those outside a project is not a skill everyone has or should have. Asking those deep within a project to shift mental gears to operate at the outsider's level can be a waste of resources and is often better delegated to a specialist. And we should be thankful for those specialists when they volunteer like this.

Epobirs said:
I'm noticing a lot of emphasis on Class 4 cards. Impetuous sort that I am, I already obtained a Sandisk Ultra 64 GB microSDXC (Class 10/UHS 1) card for this project. Best Buy had a good deal and I was hoping to have a lot of room to work with and it wasn't clear what access to the internal storage would be available or best left alone. Has anyone had success or great problems with this card?
Click to expand...
Click to collapse
Some have had good success with that card, especially if they use my Hybrid setup which uses less of the SD to operate from.

leapinlar said:
Some have had good success with that card, especially if they use my Hybrid setup which uses less of the SD to operate from.
Click to expand...
Click to collapse
It appears to be working on the first try. I'm currently syncing my app set from the Play store. It looks like this will be a huge value add for the Nook. I wouldn't have bought it if the full Android option weren't there. I just hope enough of us still buy books from B&N to keep them going.
Thanks.