I noticed that in CWM 3 (on gingerbread running device), when u click on wipe battery stats in CWM, Nothing happens while in old CWM's when we use to click on wipe battery stats, we get a message "battery stats wiped successfully".
So to wipe my battery stats, i found a software in android market called "battery calibration"
Just download this software from market (its free) and you will get your results.
https://market.android.com/details?id=com.nema.batterycalibration&feature=search_result
I plugged in the cable to get to 100% charge (4250mV), I clicked "Battery Calibration" then waited until it was done and unplugged the phone. Then it was at 99% wtf. What does this mean? Is my battery calibrated now or what?
Multiple posts on here full battery reads 100-97%
Battery is only calibrated after battery stats wiped battery drained and charged to 100% then phone used for two weeks .
jje
JJEgan said:
Multiple posts on here full battery reads 100-97%
Battery is only calibrated after battery stats wiped battery drained and charged to 100% then phone used for two weeks .
jje
Click to expand...
Click to collapse
Thanks for the info, man. So, now that I have calibrated with this app, I just have to drain the battery to 0% - then the phone turns off automatically - and recharge till 100%, then it's calibrated? Woah
PS: Do i have to recharge my phone while it is on or better while it is off?
Galaxy S 2.2.1 firmwares never show 100% battery life when not on charger. As soon as u unplug ur charger the level will drop to 96% or something. Reconnect ur phone to charger again and after 5 mins it ll again show 100% than again as soon as u unplug it, the level drop down to anywhere more than 96%.
just untick wait for 100% option in battery calibration software and ur battery ll be calibrated. do once ur phone is fully charged and once when ur battery level is just 1-2%
Actually its down to the modem version you run.
I ran one modem version that gave me excellent battery life (near on two days of constant use and only 50% drain. Also it STAYED at 100% for about 20 minutes after unplugging if i didnt use the phone, when i used this modem.
The problem is that to get better battery life you have to compromise on signal quality on the modem. The less battery the modem uses usually results in less signal strength, because its not using as much power to find its mast.
read #11 in "Getting the most out of your SGS" thread. That section is on why it's not good to overcharge your battery.
11. Do NOT overcharge
--Why, when, where: Almost all new batteries have an overcharging protection. This means that the protection that is built into the battery will not let it charge to 100%. This is a feature, not a bug! This will help prolong your battery life while also keeping it safe from overheating/explosion/etc. Do not try to trick it and unplug and plug again until you see 100%, just get used to the fact that you can't have 100% battery anymore and live with it, or you risk destroying your battery.
My device only goes upto 4170mV.
Anybody has the same issue?
Standart disclaimer: I am not responsible if you break things by following this guide, though I will be genuinely surprised if you do.
Credits: This fix is a combination of battery management techniques discussed in the Atrix forums + a technique that I originally found in a Milestone forum (I didn't invent it, but I am too lazy to search who originally posted it ).
This worked in fixing the problem for me (the same problem that I see many others are writing about on the forums), but I can't guarantee it will work for you.
Who should use this? (aka your battery problem symptoms are
1. Battery life on 2.3.4 is significantly worse for you than before.
2. Battery stats are jumping and showing inconsistent information.
3. Your phone loses 30%-60% just by sitting there overnight.
4. Phone idle draining 30%-60% of battery just by sitting there overnight.
5. After flashing a couple of roms, your battery stats got messed up and the phone thinks it's at 100% charge while it's not.
I personally started having battery problems after flashing a couple of roms, applying 1% battery mod and despite flashing jug6ernaut's CWM battery fix.
When I went to bed with a 100% charge, I would wake up to a 50% charge, with Phone Idle process showing up as massacring the battery. The steps below successfully fixed the problem for me.
Prerequisites:
1. Atrix on one of the rooted 2.3.4 roms (ideally,- deodexed and with unlocked CWM)
2. Wall Charger
3. jug6ernaut's CWM battery fix (put it on your SD card you will need it later!) I have also attached it to this post.
4. Battery Calibration app from the market
5. Watchdog Lite or Full from the market
Instructions:
It's best to complete this procedure in the evening before going to bed, so you can leave it at 100% overnight and check in the morning if the drainage issue is fixed!!!
The whole procedure along with recalibration might take up to 5-6 hours!
1. Take the case off your Atrix (one of the latter steps involves taking the battery out from the phone while it's plugged in. Make sure your case won't stand in the way.)
2. Install Battery Calibration app from the market
3. Plug in your Atrix to charge while it's on, wait till it gets to a 100%
4. When the charge is 100%, open the BatteryCalibration app and lookup what the charge is in MV while at 100%. (Explanatory pic, needed number circled in red). Write it down.
My Atrix was showing ~3400MV while at 100%, which is definitely not the maximum capacity.
5. Discharge your Atrix completely until it shuts off.
A good way of doing this quickly is by turning on wifi, and a video player.
6. Without turning on the phone plug it into a wall charger and let it get to 100%
7. When it's at 100%, without unplugging it from the wall charger, take off the battery cover, and take the battery out.
Your phone will "reboot" and show a Missing Battery icon.
8. Without unplugging the phone from the wall charger or turning it on, put the battery back in and wait until the phone recognizes the battery.
9. Your battery should now be recognized by the phone, and showing a charge % significantly lower than 100%.
Mine showed only 5%. Back when I used a Milestone, it usually showed 60% after doing this.
10. Let it sit there charging for 2-3 hours.
My phone wouldn't charge past 10%, but yours might. The numbers don't matter much as the phone is definitely getting additional charge that could have been lost while flashing ROMs, etc.
11. After 2-3 hours, turn the phone on while holding the volume down button and get into CWM.
Do not disconnect it from the charger still!
12. Install jug6ernaut's CWM battery fix (even if you had it installed before), do not reboot yet.
Do not disconnect it from the charger still!
13. Wipe battery stats in CWM, reboot.
Do not disconnect it from the charger still!
14. When the phone turns on, go into BatteryCalibration app again and look up your MV numbers
- if you were like me, they should be significantly higher than before. After this whole process I had 4200MV at 100%, comparing to 3400MV before calibration.
Do not disconnect it from the charger still!
15. Before going to sleep - Install Watchdog from the market. Go into it's preferences, set CPU threshhold to 20%, check "Include phone processes", check "Monitor phone processes", check "Display all phone processes", set system CPU threshhold to 20% as well.
Do not disconnect it from the charger still!
16. Make sure your wifi and data connections are off. Now finally unplug the phone from the charger.
Go to bed, let your phone sleep too.
17. Success! Next morning check where your battery % is at and if you followed the instructions correctly / got lucky like me, your battery life should be 90% or more.
I went to bed with 98% and woke up to 94%. So, I consider this mission a success.
(Your general battery capacity should have increased, even if something still was draining the battery, you will be able to find the infringing process in WatchDog with the settings we've set up in step 15 )
That's all folks! Please report your success / lack of such here. Also, feel free to ask questions, and I along with other users with answer them according to our ability.
I will later add a section on "good practices for battery usage" with tips and tricks.
Cheers!
Attached are screenshots of my results after calibration: This was under moderate usage. Pretty damn good if you ask me.
Post-calibration methods of improving Battery Life
Updated: Post#2 will explain how to solve battery drainage problems when recalibration wasn't enough. It will also explain how battery reporting works, common practices, tips, tricks, etc.
Battery Tips / Tricks / Common Practices
Important things to know:
1. It's important to understand how battery indicator on Android works and how Android manages / reports your battery life. Please read this article:
Your Smartphone’s Battery Gauge is Lying to You (and it’s not such a bad thing)
http://phandroid.com/2010/12/25/you...is-lying-to-you-and-its-not-such-a-bad-thing/
2. Li-ion batteries used in modern smartphones don't have "charge memory". Partial charges won't hurt the battery (e.g. charging from 60% to 80% or from 10% to 50% etc). Feel free to give your phone small charges whenever you have time and need the phone to last longer.
3. Smartphone batteries don't like to be completely discharged or to be kept at 100% capacity for extended periods of time (this actually damages batteries over time). But worry not, the battery software prevents this from happening for you. That's why some of your phones never get to 100% or drop from 100% to 90% minutes after you disconnct the phone from a charger.
4. All batteries gradually lose a small percentage of their capacity after a certain amount of charge cycles. It's a natural part of life. It's always nice to have a spare battery or to purchase a replacement when your current battery isn't to the task anymore.
5. Don't pay much attention to the battery %, just use your phones. I know it's very tempting to track your battery usage every 15 minutes and try to find problems. Been there myself. Thing is, if you do this, you might start thinking you have problems, when you don't have any.
Bottom line - just try to use your phone and not mess with the battery unless problems become really apparent.
------------------------------------------------------------------------------
Other proven ways to improve Battery Life
If you have re-calibrated to a full capacity (4200mv) but your battery still drains terribly - follow these steps to pin point the problem.
1. Find which app / process is draining the battery.
If you get lucky, the infringing app will show up directly under the stock "Battery Usage" statistics. However, in most cases "Battery Usage" isn't very informative. Most people report that they only see "Phone Idle" consuming most of the battery without much insight into the details.
Things to do:
- install Watchdog, go to preferences, set CPU threshhold to 20% (or even lower if it's not enough), check "Include phone processes", check "Monitor phone processes", check "Display all phone processes", set system CPU threshhold to 20%(or even lower if it's not enough) as well. Run it for a couple of days.
If you start getting frequent Watchdog notifications about a certain app breaching the threshold - uninstall it, find an alternative.
- install BetterBatteryStats from here -
http://forum.xda-developers.com/showthread.php?t=1179809 run it for a couple of days and monitor apps / processes that are using up more wakelocks than they should.
Once you find the infringing app - uninstall it, if it's a process - find out if it's safe to stop / freeze before doing anything.
2. Freeze bloatware aka "stop the problem before it becomes a problem."
Unless you are running CM7, your rom is based on stock 2.3.4 and still has blur in it. Blur apps and processes might be running without you even using them and sucking out precious batter life while they are at it.
Things to do:
- Get TitaniumBackup, freeze all bloatware that is mentioned as "safe" in this thread -
http://forum.xda-developers.com/showthread.php?t=1182663
Use your phone for a couple of days afterwards and watch for improvements.
If these software tweaks aren't enough, the problem might be with your system setup. Go through these steps which should hopefully fix your setup in favor of awesome battery life:
3. Flash a custom kernel, set up battery saving profiles.
Many people have reported success with this step. Custom kernels are not just for overclocking. A custom kernel with smart profiles will definitely give definitely extend your phones operating life during the day.
Things to do:
- Get a custom kernel., the popular choice on here seems to be faux'es kernel, so I recommend it -
http://forum.xda-developers.com/showthread.php?t=1156040
Get one of the battery saving SetCpu profiles along with it. Basically, a good battery saving profile looks something like this:
- absolute minimum CPU clock with screen off (something like 275 Mhz)
- lowering CPU clock with temperature > 50C (something like ~800Mhz)
- lowering CPU clock when battery < 30% (something like ~800Mhz)
Many people reported success in using such profile for lowering "Phone Idle" drain.
4. Flash a different radio.
WARNING: Be extremely careful with this. Flashing a wrong radio is the right way to hard brick your phone.
Although some people are reporting to have fixed battery drainage by trying out a different radio, I seriously wouldn't recommend going on a flashing spree unless you know what you are doing.
My advice here: flash the latest 2.3.4 for your carrier if you haven't yet. From there on, experiment at your own risk.
5. Disable Data and Wifi when idle either manually or with an app."
I seriously get surprised every time someone says they have a horrible battery life, when they keep an internet connection on at all times. Constant data always = battery drain.
Things to do:
- use apps like Green Power to disable data / wifi for you when you are not using it
- learn to turn off your internet connection manually
6. If all else fails - start over from scratch (read: clean install a rom).
I've heard reports of people getting better life with Froyo than GB, or that a specific custom ROM solved their problem for them. A million dollar question: if it works for you, why not use it?
Things to do:
- try a ROM without blur, like CM7
- try Ninja Speed Freak (developer and many users reported great battery life)
- if battery life is your top concern - try Froyo
------------------------------------------------------------------------------
FAQ
....coming soon...
... ask away!
Many thanks! Have pass about three days reading about the battery issues/solutions, and I was getting confused by so many info! Will try it tonight!
PS: Does the jug6ernaut's CWM battery fix works for the Orange 2.3.4 ?
eklam said:
Many thanks! Have pass about three days reading about the battery issues/solutions, and I was getting confused by so many info! Will try it tonight!
PS: Does the jug6ernaut's CWM battery fix works for the Orange 2.3.4 ?
Click to expand...
Click to collapse
Are you using stock Orange 2.3.4 rom?
If yes, your Rom might not have the battery jumping problem. You can still use this guide without the battery fix to recalibrate.
Let's wait for someone with Orange 2.3.4 to confirm if jug6ernaut's CWM battery fix can be used or not.
Indeed, I have not the battery jump issue, but I'm exprimenting some weird behavior...
like when I restart the phone, it shows about 10% higher than before. I tried this multiples times yesterday. When it was about 40%, it starts to drop suddenly, 'till it got to 18% and get back to normal decrease to 4%, 2~3 hours later...
See the images attached, the red circles are the times I rebooted it and the blue arrow is when it drops suddenly...
Question on step 4. To confirm, we shouldn't click on anything in BatteryCalibration, all that needs to be done is take note on the MV number, correct?
eklam said:
Indeed, I have not the battery jump issue, but I'm exprimenting some weird behavior...
like when I restart the phone, it shows about 10% higher than before. I tried this multiples times yesterday. When it was about 40%, it starts to drop suddenly, 'till it got to 18% and get back to normal decrease to 4%, 2~3 hours later...
See the images attached, the red circles are the times I rebooted it and the blue arrow is when it drops suddenly...
Click to expand...
Click to collapse
Did it only start doing this on 2.3.4 or you haven't checked before? Anyway, I would do the calibration to see if it changes anything.
coleburns said:
Question on step 4. To confirm, we shouldn't click on anything BatteryCalibration, all that needs to be done is take note on the MV number, correct?
Click to expand...
Click to collapse
No clicking in step 4. Just write down or remember the MV number.
Yes it just starts when updating to 2.3.4... In the first days I got the impression of lower battery level, so reading the forums I saw the restart/level change problem, and tested it
eklam said:
Yes it just starts when updating to 2.3.4... In the first days I got the impression of lower battery level, so reading the forums I saw the restart/level change problem, and tested it
Click to expand...
Click to collapse
You probably updated to 2.3.4 while not at 100% battery level, and it messed up your battery stat. So, yes, do all the steps in this guide except for jug6ernaut's battery fix part.
thanks, ill give this a shot....again.....tonight and hopefully it will fix my issue.
Screenshots of results added to post 1
Download link seems to be down...just errors out when trying to download.
Sent from my MB860 using XDA App
jarsh92 said:
Download link seems to be down...just errors out when trying to download.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Which download link? CMW_Jug6_FIXv2.zip?
I'm on a rooted stock GB and I'm having the problem where the battery usage stats are inaccurate and won't got below 90% after using it all day. This all started after I used Battery Calibration. Do you think that this would help correct the problem?
Edit: Also, would I need to complete all of the steps including the CWM part? I haven't flashed any roms yet, so I don't know if this would be necessary.
ThickG said:
I'm on a rooted stock GB and I'm having the problem where the battery usage stats are inaccurate and won't got below 90% after using it all day. This all started after I used Battery Calibration. Do you think that this would help correct the problem?
Edit: Also, would I need to complete all of the steps including the CWM part? I haven't flashed any roms yet, so I don't know if this would be necessary.
Click to expand...
Click to collapse
Seems like you used Battery Calibration while not at 100% charge and your battery stats got messed up.
The reason I recommend using CWM is because the battery stats file is created on each boot. So, with my instructions you can charge the phone to 100% while it's off and wipe the messed up stats before it boots.
You can try using my instructions, without the CWM part, except you need to wipe your battery stats with Battery Calibration app after step 4.
lol i left pandora on since this morning and its only at 67%. ugh, when i wanna force drain the battery it goes slow as hell but when i wanna conserve battery live for usage it drains quick. hahaha.
I just flashed navalynt's πCrust rom fully charged, cleared stats through cwm, booted and now i'm close to 3days.
dictoresno said:
lol i left pandora on since this morning and its only at 67%. ugh, when i wanna force drain the battery it goes slow as hell but when i wanna conserve battery live for usage it drains quick. hahaha.
Click to expand...
Click to collapse
lol yes. I used video playback to drain mine. But if it's really a PITA, you can always just leave it till tomorrow to discharge naturally.
Jonous said:
I just flashed navalynt's πCrust rom fully charged, cleared stats through cwm, booted and now i'm close to 3days.
Click to expand...
Click to collapse
Yep, that's why flashing only when at 100% charge always pays off.
I get the same results by booting to CWM, wiping battery stats, rebooting, starting Battery Calibration, plugging phone into wall charger, charging to 100% (4197mv for me), and then calibrating with Battery Calibration. I start this process at any battery percentage, and have been doing this for a long time now. I have never had to deplete my battery until my phone shuts off, and get great battery life.
Beamed from WinBorg 4G via XDA Premium
CaelanT said:
I get the same results by booting to CWM, wiping battery stats, rebooting, starting Battery Calibration, plugging phone into wall charger, charging to 100% (4197mv for me), and then calibrating with Battery Calibration. I start this process at any battery percentage, and have been doing this for a long time now. I have never had to deplete my battery until my phone shuts off, and get great battery life.
Beamed from WinBorg 4G via XDA Premium
Click to expand...
Click to collapse
After the calibration I had 4200mv, so it seems like you are doing things right in regards to the battery.
"Taking the battery out and putting it back in" trick works wonders though in restoring battery life to maximum state (if you had it decrease for some reason). I've tested it multiple times even back when I had the Milestone.
This happens when battery level is below like 30% on my HTC Evo. I am using a customized ROM (Supersense). Whenever the battery reaches 30% remaining, it doesn't drop. However, if I use the phone for a while and restart it, the battery shows only 10%. Clearly, some of the battery management program does not work properly. Is it a bug related to battery itself (hardware) or ROM (software)? Anyway to fix this?
You could try charging your phone up fully then go into recovery and delete the battery stats(Under Advanced in CWM), unplug your phone and use it until it discharges fully and shuts off. Finally, recharge the phone fully again once it has died. I believe this will calibrate the software that monitors your battery or something like that. You can find more specific instructions on the net if you want. Some people like to bump charge and everything else to try to get it perfect but I never found the need to go to that extreme.
Evo_Shift said:
You could try charging your phone up fully then go into recovery and delete the battery stats(Under Advanced in CWM), unplug your phone and use it until it discharges fully and shuts off. Finally, recharge the phone fully again once it has died. I believe this will calibrate the software that monitors your battery or something like that. You can find more specific instructions on the net if you want. Some people like to bump charge and everything else to try to get it perfect but I never found the need to go to that extreme.
Click to expand...
Click to collapse
Download "battery left" from the market and it will recalibrate your battery. Also yes, I would reset battery stats as well but battery left will actually recalibrate it. Battery stats is how long the phone has been on, what's using the most battery, etc. Correct me if I'm wrong.
Just boot into recovery and wipe battery stats.
I had this problem once.
All I did was download "Battery Left" as VICODAN said and I flashed this zip that I got from somewhere on this site but I forget where. I had to change the updater-script and the binary but either way it works on our Shift. Charge to 100% and flash this, then with Battery Left install use the phone till it dies and after that, you should be golden.
battery calibration
U can try the app battery calibration also in the market. If you're rooted.
*Since we're talking about batteries.
I wish our phones would beep or set off an alarm when charged to 100%.
I was keeping battery calibration just for that, it has that option but only worked maybe 1 out of 20 times the alarm went off.
trsix said:
U can try the app battery calibration also in the market. If you're rooted.
*Since we're talking about batteries.
I wish our phones would beep or set off an alarm when charged to 100%.
I was keeping battery calibration just for that, it has that option but only worked maybe 1 out of 20 times the alarm went off.
Click to expand...
Click to collapse
Love the app, so when i got to sleep or I am going to calibrate, I just open the calibration app throw it on charge, it beeps I hit calibrate unplug and done. That way I don't have to open the app when It's 100% or with early morning fuzzy eyes and fingers that don't work right
Sent from My Team Supreme/MikSupreme Shift
ctzw said:
This happens when battery level is below like 30% on my HTC Evo. I am using a customized ROM (Supersense). Whenever the battery reaches 30% remaining, it doesn't drop. However, if I use the phone for a while and restart it, the battery shows only 10%. Clearly, some of the battery management program does not work properly. Is it a bug related to battery itself (hardware) or ROM (software)? Anyway to fix this?
Click to expand...
Click to collapse
Wrong forum...you state that you have a Evo, this forum is for Evo Shift.
Sent from my PG06100 using xda premium
Hey guys,
today my phone just didn't show any other battery capacity than 50%. I had it on my car dash charger for multiple hours. This evening it still turned off and showed the "Battery too low" screen, so I assume it did not charge.
First, TWRP also showed 50% and a very long weird number as CPU (top left), then it stopped showing anything about the battery
After I turned it off and tried to charge it, it crashed in the bootlogo and rebooted.
Any ideas what to do? I already reflashed the firmware.
Best regards
Colin
I have this problem too
Just use it till it gets fully drained then charge it?fully
Currently encountering the same issue with my OP5 now and when I consulted a tech regarding this one, he informed me that it may be a possible motherboard or battery issue. Will have my OP repaired by early January and hoping that it's only a battery issue(fingers crossed).
TheColin21 said:
Hey guys,
today my phone just didn't show any other battery capacity than 50%. I had it on my car dash charger for multiple hours. This evening it still turned off and showed the "Battery too low" screen, so I assume it did not charge.
First, TWRP also showed 50% and a very long weird number as CPU (top left), then it stopped showing anything about the battery
After I turned it off and tried to charge it, it crashed in the bootlogo and rebooted.
Any ideas what to do? I already reflashed the firmware.
Best regards
Colin
Click to expand...
Click to collapse
Shivanshpro said:
Just use it till it gets fully drained then charge itfully
Click to expand...
Click to collapse
Looks like you drained the battery too much and the battery chip got confused. Or worse, one of the cells died. This doesn't just happen to OP5, but to all batteries.
There are a few options:
Replace the battery: https://www.ifixit.com/Guide/OnePlus+5+Battery++Replacement/103028
Turn off the phone, then charge it fully while off. Then slowly drain the battery again, in a way where the phone isn't sleeping so Android can gather battery statistics.
If above didn't work, then do above method, but also clear battery statistics in TWRP, or the recovery of your choice.
There's the option of putting it in a vacuum sealed bag, and putting it in the freezer. Google for details, and do's & dont's.
Hope this helps!
Did you get the issue fixed? Currently I'm also having the same problem