Related
I bought the PDAir flip case for the Kaiser last week and got it in yesterday's mail. You can order it from PDAir direct -- there's also a guy on eBay selling them for $18.99.
The case is a very snug fit -- the keyboard slides into a pouch formed by the back of the case and a clear plastic keyboard cover. This works much better than the clear plastic & velcro keyboard cover their Wizard case used -- the Wizard case was pretty loose, and the Velcro doesn't hold up to repeated opening/closing.
The case cutouts (for buttons, USB jack, etc) match up pretty well once you get the Kaiser firmly seated -- that can take a bit of work since the case is so snug. These cutouts make the buttons easy to find -- especially the power button.
The only real problem with this case, IMHO, is the lack of microSD card storage -- previous PDAir cases have had at least one card storage pocket. Overall I'd give this case an 8.5 out of 10.
3waygeek said:
The case is a very snug fit -- the keyboard slides into a pouch formed by the back of the case and a clear plastic keyboard cover. This works much better than the clear plastic & velcro keyboard cover their Wizard case used -- the Wizard case was pretty loose, and the Velcro doesn't hold up to repeated opening/closing.
The case cutouts (for buttons, USB jack, etc) match up pretty well once you get the Kaiser firmly seated -- that can take a bit of work since the case is so snug. These cutouts make the buttons easy to find -- especially the power button.
Click to expand...
Click to collapse
Nice review, I'll probably get one.
The only real problem with this case, IMHO, is the lack of microSD card storage -- previous PDAir cases have had at least one card storage pocket. Overall I'd give this case an 8.5 out of 10.
Click to expand...
Click to collapse
I find an 8/16GB micro sd card enough, I put the spares in my normal money wallet.
I bought one a while back and it lasted less than a month,I was using the belt clip and the leather on the back became loose and the case became useless.!
PDA Air book type case
Bought this on ebay $15 + postage another $15 to GB
I don't use belt clips, it is a little thick and tight, may wear in. I seem to buy a whole shed load of accessories initially, see what I like, and then re-cycle the rest back onto ebay.
So far i quite like it if I'm walking about, but in the office, I tend to take it out and put it my shirt pocket (why do so many work shirts these days are less a pocket!!?)
I have both PDAir and Krusell case and to be frank, I like the PDAir more. However, beware of the screwed in belt clip as it might get loosen after some time, I dropped mine once but luckily on the carpet.
I Agree that the PDAir is a pretty good case, the belt clip post is the only part I changed. For a case that can stay on and be fully functional, and clip into a car mount, this one is hard to beat.
Here's my review and pics of my "improvements";
http://forum.xda-developers.com/showpost.php?p=1648005&postcount=136
I have since switched to the Pocket Solutions "Signature Series" flip as it's the best of all worlds for me as I can use the phone as a touch screen type and then very easily slip the phone out of the case to use the keyboard and/or show off the phone with no case. It really has the best swivel post I've ever seen;
http://forum.xda-developers.com/showpost.php?p=1790595&postcount=246
I bought the rectangular one with the free battery and it fits great and works great. The price for the whole thing was less then half the price of a battery from AT&T. Only thing is it took almost 3 wks to get.
I'm thinking about getting another one for my office.
How about this one ? Not sure how bulky it is but it looks nice.
_www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=896
RemE said:
I Agree that the PDAir is a pretty good case, the belt clip post is the only part I changed. For a case that can stay on and be fully functional, and clip into a car mount, this one is hard to beat.
Here's my review and pics of my "improvements";
http://forum.xda-developers.com/showpost.php?p=1648005&postcount=136
I have since switched to the Pocket Solutions "Signature Series" flip as it's the best of all worlds for me as I can use the phone as a touch screen type and then very easily slip the phone out of the case to use the keyboard and/or show off the phone with no case. It really has the best swivel post I've ever seen;
http://forum.xda-developers.com/showpost.php?p=1790595&postcount=246
Click to expand...
Click to collapse
Where did you bought your vent clip???
thanks
Hi all, I was wondering what kind of cases, if any you guys are using to protect your investment. Right now I'm using the standard issue belt pouch which came with my device, but it's difficult to use at best, especially on a crowded bus or train where it could easily slip one's fingers while fumbling to get it out. Your input would be most appreciated.
Krusell Orbit, it's at Amazon from SF Planet for $22. It's pretty sweet, has clear plastic KB protector, stays on when you slide the kb open, back flap lowers for camera usage, allows access to all buttons etc, even charging when its fully closed. Come with one button removable Multitap belt clip. Very nice case IMO....
JETninja said:
Krusell Orbit, it's at Amazon from SF Planet for $22. It's pretty sweet, has clear plastic KB protector, stays on when you slide the kb open, back flap lowers for camera usage, allows access to all buttons etc, even charging when its fully closed. Come with one button removable Multitap belt clip. Very nice case IMO....
Click to expand...
Click to collapse
I agree, I have a Krusell and love it! very well made...
I have recently bought the following case:
http://igonemobile.com/product.aspx?tab=3&m=613&p=15335
The only issue I had with the case was the front cover about 1/8" too low. It didn't affect the view of the screen. They wanted me to pay for the return of the item, so I guess I will just live with it. It's still not a bad case. I also got a $13 Case Logic one that also works great.
Hey guys/gals, just thought I'd share this with you. I bought this case for my Tilt and it's one of the best I've had. The phone fits perfect in this case. Snug but easy to get out. I paid $12 on ebay for it. Make sure you buy the one with the attached belt clip (like in my pic). There is another one on there that allows you to change the belt clip. I had that one too but (same perfect fit) but unless you have a thin belt, the clip will not catch the belt. I'll include one of my previous cases. This one is just a better looking case and feels real sturdy. Hope you like it.
Have you seen a case that exposes the miniUSB port? I've seen a lot of good cases, but none that will expose the miniUSB. My second option would be just to go with the Seidio Slim Ruberized case.
Kraize
Kraize92 said:
Have you seen a case that exposes the miniUSB port? I've seen a lot of good cases, but none that will expose the miniUSB. My second option would be just to go with the Seidio Slim Ruberized case.
Kraize
Click to expand...
Click to collapse
Unfortunatly no I haven't. There's a thread on here that has the Seido clip with mods on it. Looks sweet.
I recently had bought a case for my Wing (before getting the tilt) and it fits the tilt perfectly and allows access to the usb port - unfortunately it seems the ebay seller is no longer registered so I can't even get the details from the auction.
This is HTC branded and the listing was titled NEW HTC TOUCH SHADOW MOGUL VX6800 MDA OEM LEATHER CASE
Edit - Found the case, different seller and more expensive, but you can see it - http://cgi.ebay.com/OEM-Leather-Case-Pouch-for-HTC-Wing-P4350-Herald-XV6800_W0QQitemZ150268701210QQihZ005QQcategoryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I've got the Krusell Orbit leather case with multidapt and I really like it, I've tried several so far and this is the one that I'm keeping...
http://www.krusell.se/product.php?productID=2776&category=51
I've also got the Krusell CarHoldicKit adapter as well to go with it, I like being able to unclip my phone from my belt with the clip still remaining on my belt, and attach to dashboard while driving, it makes using the GPS very easy and other related accessories as well...
dampeal said:
I've also got the Krusell CarHoldicKit adapter as well to go with it, I like being able to unclip my phone from my belt with the clip still remaining on my belt, and attach to dashboard while driving, it makes using the GPS very easy and other related accessories as well...
Click to expand...
Click to collapse
It works that well? I was interested in both the orbit and carholickit (think i still have an old one), but was thinking the flap would be in the way when using it for GPS? This isn't the case?
airjer said:
It works that well? I was interested in both the orbit and carholickit (think i still have an old one), but was thinking the flap would be in the way when using it for GPS? This isn't the case?
Click to expand...
Click to collapse
The flap and GPS? No, I have my mounted like this, so when I open flap it just rests on dashboard:
If you wish you can read my full review of the Orbit HERE, lots of pictures etc included of course
dampeal said:
I've got the Krusell Orbit leather case with multidapt and I really like it, I've tried several so far and this is the one that I'm keeping...
http://www.krusell.se/product.php?productID=2776&category=51
Click to expand...
Click to collapse
That's the one I've just bought... and I like it a lot. Fits really well although the slideout keyboard doesn't slide as smoothly now it's in the case.
dampeal said:
The flap and GPS? No, I have my mounted like this, so when I open flap it just rests on dashboard:
If you wish you can read my full review of the Orbit HERE, lots of pictures etc included of course
Click to expand...
Click to collapse
Thanks for the GREAT review.
I have this HTC OEM case and it's real nice and pretty cheap. Fits perfectly with the Seidio case installed on the Tilt.
I recently purchased the Seidio rubberized case/holster combo. This is an excellent product. I was looking for protection for the Tilt's body, however, wanted to access the screen. I was using the metal case from Monaco, very well built, however, twice my Tilt fell out of the case when the unit was on my belt and the latch caught on the bumper of my car and the Tilt when bouncing on the pavement. Also, my signal was very weak with the metal case, never realized this was the problem as I always used a metal case. I switched to this combo unit and I now have an extra 1-2 bars of signal regularly. Also, I like the fact the holster will hold the unit with the skin in place, faces inward, giving max protection to the screen which is easily accessed. If you want a case to protect the body of the tilt, access the screen easily, and use with a belt clip (do not have to use the clip holster), I could not imagine a better choice. I am very happy with the quality and design of the unit.
https://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSRCG8925-BK
jim131 said:
I recently purchased the Seidio rubberized case/holster combo. This is an excellent product. I was looking for protection for the Tilt's body, however, wanted to access the screen. I was using the metal case from Monaco, very well built, however, twice my Tilt fell out of the case when the unit was on my belt and the latch caught on the bumper of my car and the Tilt when bouncing on the pavement. Also, my signal was very weak with the metal case, never realized this was the problem as I always used a metal case. I switched to this combo unit and I now have an extra 1-2 bars of signal regularly. Also, I like the fact the holster will hold the unit with the skin in place, faces inward, giving max protection to the screen which is easily accessed. If you want a case to protect the body of the tilt, access the screen easily, and use with a belt clip (do not have to use the clip holster), I could not imagine a better choice. I am very happy with the quality and design of the unit.
https://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSRCG8925-BK
Click to expand...
Click to collapse
i second that one. ive gone thru metal, silicone, plastic and even leather cases for my tilt. none of which seemed to work until I went with the seidio innocase holster combo that the gentleman above me stated. its really the best case and it comes with the holster facing inward so you can have maximum protection for your phone with easy access. point blank period.
thetruth1985 said:
i second that one. ive gone thru metal, silicone, plastic and even leather cases for my tilt. none of which seemed to work until I went with the seidio innocase holster combo that the gentleman above me stated. its really the best case and it comes with the holster facing inward so you can have maximum protection for your phone with easy access. point blank period.
Click to expand...
Click to collapse
With that case do you have to face it inside, and is it really worth $50.00? Geez their high.
I already have a soft rubber case and wondering if I could get buy just buying the holster for it.
texas said:
With that case do you have to face it inside, and is it really worth $50.00? Geez their high.
I already have a soft rubber case and wondering if I could get buy just buying the holster for it.
Click to expand...
Click to collapse
not necessarily, you could face it either way and its worth it. believe me, its worth it. even though its a little pricey.
The rubberized case is good. I gave up on the holster because the clip kept getting caught and would disengage the phone causing it to fall.
I got a Palm Treo case and it fits perfectly. The Seidio case also prevents the Tilt's buttons from being accidentally pressed.
This is the best combination of all the cases I have tried.
grymicast184rc said:
I have this HTC OEM case and it's real nice and pretty cheap. Fits perfectly with the Seidio case installed on the Tilt.
Click to expand...
Click to collapse
This is the same case I have. Been very happy with it! For the person who asked... it does leave the USB port exposed.
mrschwarz said:
The rubberized case is good. I gave up on the holster because the clip kept getting caught and would disengage the phone causing it to fall.
I got a Palm Treo case and it fits perfectly. The Seidio case also prevents the Tilt's buttons from being accidentally pressed.
This is the best combination of all the cases I have tried.
Click to expand...
Click to collapse
what holster were u using
GuySparkz said:
what holster were u using
Click to expand...
Click to collapse
I bought the Seidio case and holster combo kit.
Has anybody purchased the Seidio Innocase Surface case?? Could you post some pictures?? I'm debating if I want it or not, but one picture on their website really doesn't show how thick it really is on the phone. Also looking at opinions if you have it on your Touch Pro/FUZE. Thanx.
I should be ordering the case this week. I'll let you know.
RallyPunx said:
Has anybody purchased the Seidio Innocase Surface case?? Could you post some pictures?? I'm debating if I want it or not, but one picture on their website really doesn't show how thick it really is on the phone. Also looking at opinions if you have it on your Touch Pro/FUZE. Thanx.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=461936
That thread has links to the Seidio site, which has pictures of the case from different angles.
More specifically...if you go through this link and "mouse over" the picture of the case, it'll magnify the area:
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HTFE-BK
If you actually click on the picture, it will take you to this page, which has a few different angles.
http://www.seidioonline.com/PhotoGallery.asp?ProductCode=CSR2HTFE-BK
I saw those pictures on the website, but you can't really see the area around the screen very much to see how deep the screen is with the case on. I don't use the stylus much and I think if the case is too thick, I will have trouble hitting the corner buttons (start, calendar, contacts) with my finger. Any thoughts?
D3TH METAL said:
I should be ordering the case this week. I'll let you know.
Click to expand...
Click to collapse
Please also let us know how well this case works for you. There is a similar type of case for $10 on ebay which causes a phone lockup due to improper fit around the screen:
http://forum.xda-developers.com/showthread.php?t=459761
The problem rears its ugly face usually after a couple days of use...
I'd be willing to pay 3x for a case that actually works!
thanks!
jknuckey said:
Please also let us know how well this case works for you. There is a similar type of case for $10 on ebay which causes a phone lockup due to improper fit around the screen:
http://forum.xda-developers.com/showthread.php?t=459761
The problem rears its ugly face usually after a couple days of use...
I'd be willing to pay 3x for a case that actually works!
thanks!
Click to expand...
Click to collapse
I honestly don't see how any of these cases would work better than the ebay one. I had the BG one which actually is worse than the ebay unit. The ebay unit I have has been fine for more than a few days. It has to do with the flush screen of the FUZE so any excessive pressure against the screen would render the screen inoperable over time. BUT without the pressure/tension, there would be play once the upper piece is snapped on.
There isn't really much room to do this due to the flush screen IMHO.
I bought a similiar case from Brando. It is clear plastic instead of black. It works well and there was another thread about it here. It just blocks the PTT button on the Fuze. Ive used it for a month and it works fine, no screen problems. Only problem for me is one of the tabs came off, but it still stays on nice and sturdy. Its adds quite some thickness to this already thick phone.
I switched to the Innocase w/ holster about 1 week ago from the Body Glove 2-pc Snap Case. I like both:
The Body Glove is built like a Brick S--- House, has a very nice non-slip finish that actually matches a resident wallpaper. The phone is very safe in this case however, its a pocket carry, no belt clip.
The Innocase is half the thickness of the Body Glove. It fits like 2nd skin and has a silky feel and seems to be a bit slippery. The holster at 1st glace scared me. Thought the phone would pop out but I have found after a week of use, its just fine and very handy. The clip that holds the phone is spring loaded and can be locked to keep the phone from being removed if needed. The only problem I see is for those of you who wish to holster your phone and listen to music with a wired connection. The Headphone jack is slightly obscured by the Lock clip of the holster. Nothing a Dremel tool couldn't fix very quickly.
As stated, I like them both but use the Innocase as my daily protection. If I find myself exposed to rougher conditions, my choice is the Brick S--- House case from Body Glove. Both fit like second skin.
Ok so the OEM tmobile gel and plastic cases for the G2 are totally worthless. I've never seen a case made of such low quality and they want like 20 - 30 bucks for them.
i was curious to see if anyone bought anything good off ebay or elsewhere?
cheers
Refer to the Accessories section in the G2 sub section of this forum. You will find bunch of cases.
Im using a G1 foam sleeve, fits perfectly
Sent from my HTC Vision using XDA App
How can you say the T-mo gel is worthless? IMO, its the only one worth the money, and its only $16. It fits perfect, it feels good, and it protects GREAT.
Sent from my T-Mobile G2 using XDA App
I have both the gel case and the Bodyglove snap-on case.
I switch between them as the mood strikes me, but I'm somewhat more fond of the bodyglove case. The gel case adds somewhat more size to the phone and has a tendency to pull money/receipts/etc. along when I take it out of my pocket.
The bodyglove case is smaller, lighter, and allows access to the physical device buttons, whereas the gel case covers them and I find it sometimes difficult to hit the volume buttons, and exceedingly difficult to use the camera focus half-press.
I have the Protective Hard cover. Its a all clear plastic case with kickstand. It looks really nice and is a pain to take off.
papeshfoo said:
How can you say the T-mo gel is worthless? IMO, its the only one worth the money, and its only $16. It fits perfect, it feels good, and it protects GREAT.
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
it just looks and feels cheaper than dirt. not worth 5 bucks in my opinion. i've just seen cheap cases for other phones and they feel and look by far better than the tmo one.
I run mine naked.
kgold708 said:
I run mine naked.
Click to expand...
Click to collapse
LOL!
I have the Body Glove case. I like that it keeps it from slipping out of my hand or off the dash.
I have the t-mo gel case (the thicker $18 one) and I love it. I work next to a cell phone accessory kiosk and none of the other cases even come close to the protection AND quality of the t-mo one. Yeah it sucks when you need to pull it out of your pocket, but that can be said of any gel case.
I use the Maya case from Proporta. It's just a nice leather sleeve with a soft microfiber-like interior. I don't like having an actual case around my phone, but like to have it in the sleeve in my pocket to protect it from scratches and drops.
There is a nice body glove case w/out a clip and has a kinda disco pattern on it. Not bulky at all for being BG.
Sent from my T-Mobile G2 using XDA App
v8pwrdz28 said:
Im using a G1 foam sleeve, fits perfectly
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
+1
Picked one up on Ebay for $4 shipped and it fits great. Nice sleeve to protect the phone when its in my pockets from scratches. With a Skinomi screen protector on the screen, I know my phone is well protected.
I've got the Tmo metallic dark purple snap-on hard shell case. The stores were having (are still maybe?) a sale on accessories. I love the color more than I thought I would and it's definitely very good quality in my opinion. That being said, I wish it was a rubberized finish similar to the back battery cover of the G1, but I'll order a shell case like that soon.
I also made a "holder" for my G2 out of a Moleskine Memo Pocket (I left one pocket for my ID, credit cards, etc and cut the rest out carefully with an exacto knife then padded the interior with micro-suede). I just slip the phone in and it's protected from any other stuff rattling around in my purse. Or I can just add my ID and necessities for a quick carry-all.
I have both the bodyglove and the $16 case. The bodyglove case which protects the back half of the phone is great. But, the other front half of the case's frame is too thin and not durable. If you remove the case about once a day, the snaps will give out or just not catch anymore. Also the cutout to the camera makes it impossible for me to fit my finger in and focus the picture before taking it.(hold half way down to focus). The $16 case is perfect for me. There are no cut outs to the volume toggle or camera button so it allows you to apply slight force to focus then a full press of the button to take a picture. Also the bottom base of the front half wraps around the keypad for a more secure fit.
Take a look at this video I made, fast forward to 4:06 where I did a quick rant of the bodyglove case. Linked below. You'll see the sides of the case started to spread apart and peel off. The $16 which I've had on longer than the bodyglove does not give me any of those problems.
http://www.youtube.com/watch?v=WfDdDWttzRI