[Q] Need Help With Recovery - Droid X General

So this is what happened...
I was helping my buddy install a Rom on his Droid X, and after wiping everything and installing the rom, i rebooted the phone and it got stuck on the "M" screen.
So i figured i would go into recovery and either restore a back-uped session or just wipe everything and reboot again.
But in recovery, he doesnt have an option to restore sessions or anything. and when i try to wipe data and clear cache partitions, he still gets stuck at the "M" screen when i reboot.
Also, in recovery, it gives me a message that says,
"E:cant open /cache/recovery/command"
and after googling this and looking for solutions, none have helped. It says try pulling battery for 5 minutes, or deleting the "update.zip" file (which i cant because i cant boot the phone up), and even pulling the SD card (which doesnt make sense, but nonetheless didnt work anyway).
Any help would be appreciated. I feel real bad for putting his phone on a soft brick haha so please help a brotha out.
Thanks in advance

ejeetguy said:
So this is what happened...
I was helping my buddy install a Rom on his Droid X, and after wiping everything and installing the rom, i rebooted the phone and it got stuck on the "M" screen.
So i figured i would go into recovery and either restore a back-uped session or just wipe everything and reboot again.
But in recovery, he doesnt have an option to restore sessions or anything. and when i try to wipe data and clear cache partitions, he still gets stuck at the "M" screen when i reboot.
Also, in recovery, it gives me a message that says,
"E:cant open /cache/recovery/command"
and after googling this and looking for solutions, none have helped. It says try pulling battery for 5 minutes, or deleting the "update.zip" file (which i cant because i cant boot the phone up), and even pulling the SD card (which doesnt make sense, but nonetheless didnt work anyway).
Any help would be appreciated. I feel real bad for putting his phone on a soft brick haha so please help a brotha out.
Thanks in advance
Click to expand...
Click to collapse
What ROM? What was the Android version before hand? At this point it's not going to matter, you're going to need to SBF (factory restore). Check google for guides, or look @ the site in my signature.

Yeah, seems from you described you got your hands on a bad file; maybe the file didn't get downloaded completely. In any case, your best bet is to sbf your phone (restoring to stock using software). There is a ton of info on that, do you shouldn't have a problem on how to do that. If you need help or direction, please let us know.
Sent from my DROIDX using XDA Premium App

you have encountered my one gripe about my X. You can't get to recovery if you get stuck in a boot loop.
Your only option is to sbf back to stock and go again. I just had this happen today while I was at work. I decided I want to run Apex 2.0 alpha 3 and messed up. I was stuck at work all day without my toy.

im having the exact same problem and i tried to sdf back to stock using rsd lite as explained in another section and it goes thru the whole process reboots itself, says 100% done and tells me to "power up this phone" only i cant because when it rebooted it got stuck on the M screen ands stays there and i cant power it up.....Any suggestions appreciated THANX

Get into stock recovery and wipe
Sent from my DROIDX using Tapatalk

Related

Booting into clockwork recovery

I don't know how I did it, but everyone else is trying to boot into Clockwork Recovery mode successfully...and the whole pull the battery mode doesn't work 100% of the time...buuuut...I CANT STOP!
I can't stop booting into Clockwork. Every time I turn my phone on, it boots into the Clockwork Recovery, without fault. I've rebooted almost 30 times now and every time its done the same thing. Once it reboots into recovery, it will allow me to reboot the phone and then it boots normally. I really want to fix it, its annoying. The phone still works without any issues, its just really annoying that I have to sit there and watch it boot up to get it to the actual phone.
I don't want to unroot and start over with it all because I've made so many small changes to the phone and made it my own.
Sooo, pleeeeeeeeeease anyone with any info or fixes; let me know!
Mine did that too so I flashed the SBF and started over from scratch. I am afraid to try the D2 Bootstrap again for that reason. For now I can live with it. Did you find a fix yet?
How does this work?
When your device boots up, there is a init.rc script in your boot image that runs various components found in /system. The Droid X recovery bootstrap mimics the "logwrapper" binary. The hijacker then looks for "/data/.recovery_mode", and if it finds it, it unmounts /system to prevent android from starting. It then starts up recovery instead.
That's from Koush's site. Have you tried to delete the .recover_mode file if it clears it up? If you do try may you please post back?
Worked for me! Thanks for that!
Apparently it only happens randomly to some people. My roommate has a Droid2 and his never did it....weird.
kwheel596 said:
Worked for me! Thanks for that!
Apparently it only happens randomly to some people. My roommate has a Droid2 and his never did it....weird.
Click to expand...
Click to collapse
Glad it worked. It happened to me too and I just used the sbf file to restore everything. Did you use any mount adb commands before you had that problem?
To be honest I have no idea, I've had android phones for a while so I was just flying through the commands and don't remember what was typed
Unable to remove "ClockworkMod Recovery"
[/QUOTE]That's from Koush's site. Have you tried to delete the .recover_mode file if it clears it up? If you do try may you please post back?[/QUOTE]
So, I looked throughout my sd card, and have been unable to find any ".recover_mode" file.. I still get the ClockworkMod Recover screen EVERY time I reboot my device.. I have rooted and unrooted multiple times to try and figure out this problem, as well as searched through this website for answers.. I am not finding any.. HELP!?
Ultimately, I would like to just restore my phone to factory so I can pass it on to a friend..
Thanks in advance for everyone's help!
Chenoaem
Im not able to get into recovery at all... even after flashing recovery using rom manager... and the koush flash doesn't work either. When I try to boot into recovery, it just shows the yellow triangle and the ! and the android icon.....what can i do to get around this? The device is rooted using z4root..... thx!
enkrypt3d said:
Im not able to get into recovery at all... even after flashing recovery using rom manager... and the koush flash doesn't work either. When I try to boot into recovery, it just shows the yellow triangle and the ! and the android icon.....what can i do to get around this? The device is rooted using z4root..... thx!
Click to expand...
Click to collapse
nevermind... forgot to hit the search key! doh!

[Q] Droid 2 bootloop, need help.

Hello all,
I am Conmanx360. I am not usually one to ask for help, and I kinda provide my own answers. But I am completely stumped at this point. My droid 2 is stuck in a bootloop after installing a new rom (I installed it weirdly, and now it won't start. It's stuck in the boot animation, and won't go further) . I've tried powering it on to see if it boots back into clockwork recovery, and I'm getting nothing. Now I remember from my droid 1 that I could sbf, but I'm not finding anything on how to get droid 2 into the flashing interface. Quick replies if you can.
Thanks,
Conman.
P.S: I checked out the other threads, and while they had info, it wasn't what I needed.
Well, I may have just fixed this myself. Way I did it was to go into the stock bootloader (power+x on startup) . Press the physical search button on the keyboard. Then do a wipe of the data and cache. This helped fix mine, I'm not so sure about everyone elses.
I have the same exact problem, like literally the same exact one. I switched from a D1 too and everything was so much easier and simpler. If you get a solution to your problem please send me a message. I'll do the same.
Did you try to wipe data and cache?
Conmanx360 said:
Did you try to wipe data and cache?
Click to expand...
Click to collapse
Yes, but now it'll take me to the android home screen and it'll stay on for about 5 seconds with the theme i downloaded and then boot loop again.
You need to sbf as i posted in your original topic last night.

[Q] Droid 2 on load screen

I rooted my Droid 2 and all went well. Then I tried to load the Epic Unleashed 2.5 rom and now I get to the load screen after the Motorola logo and it just keeps trying to load over and over accomplishing nothing. Is there anything that I can do to fix this? Any help please. Thanks all.
Did you bootstrap and make a backup? If not, time for an sbf.
Try wiping data/cache. Worth a shot before going straight to SBF.
True, try wiping first. And make sure you do that before any flash in the future.
I did use bootstrap and I also did do a backup. I also tried a wipe data factory reset. I tried to wipe the cache, but at the bottom it said,
E:Can't open /cache/recovery/command
Any ideas?
mike3702 said:
At the bottom it said,
E:Can't open /cache/recovery/command
Any ideas?
Click to expand...
Click to collapse
It always says that it's not a problem. Are you able to boot up all the way?
It doesn't boot up all the way. It goes through the moto screen then into the rom start up screen then starts to loop.
Sent from my Droid using XDA App
Can you get back into Clockwork Recovery?
If you do a battery pull or shutdown your phone completely. Then plug it into the wall(while it's still off). Then power it on (even if it's on the battery screen). Now you should be in Clockwork and you can proceed to restore a backup.
If that doesn't work then I think you'll have to re flash your phone with the sbf. You can use this method HERE to do that. Hopefully you don't have to.
I'll try that thanks. Hopefully that will work.
Sent from my Droid
That didn't work. Thanks for the help.
Any other ideas before flashing?
The only thing I can think of is trying it again before flashing. Or doing some battery pulls and trying to get in that way but I think the plugging in method works a lot better and a higher percentage of the time.
If you do end up flashing make sure you read about the versions if you have the OTA update to 2.3.2 then you have to use the 2.3.2 sbf. If you don't have it then it's ok to use the regular 2.2.0 or if you want the update you can use the 2.3.2 and you'll be at the same place just with the update installed. Then you'll have to reroot and then install the bootstrap and then the ROM you want.
Thanks you've been alot of help. I appreciate all the help. Oh yeah just wondering when I enter the codes is it the first code then enter then the second then enter or is it enter the first code then the second then enter? Thanks again.

[Q] MyTouch 4g: Multiple problems... PLEASE help.

Okay, I've searched and searched and no one seems to have the specific problem that I'm having with my phone, so I'm taking to the forums myself. I've been rooting since the G1, I know how to adb push things, I have used google and multiple forums to try to fix this problem. So here goes, anyone that can help I thank you in advance.
1-My phone, like some other MT4G users, reboots itself each time it's plugged in. Initially I thought this was because I was using a Kindle cord to plug it into the pc, so I bought an MT4G usb cable from tmobile, and still it boot loops (just the first white screen for maybe 4 seconds, then black then again and again). The only way to charge it is to let it start boot looping, take the battery out, turn it on, and if I'm lucky enough that it begins to boot up correctly I plug it in mid boot. If I wait til it's fulled loaded it just starts rebooting again.
2-It will not at all from any angle go into Recovery mode. If I try to go to recovery from Rom Manager, or from the screen you get when holding power and lower volume key or by flashing a rom through Rom Manager, it just boot loops just like mentioned above, until I pull the battery for a while (it is currently sitting next to me with the battery out) and then put it back in.
3-If by chance it's on, and plugged into the computer, it is not at all recognized. Ever. While it's booting up my computer finds something, but doesn't know what it is, and doesn't allow me to view any folders on the SD card. Yes I've installed the HTC drivers file. I've adb'ed things to this phone before, now it says device not found. I don't know when it stopped being recognized...
4-I've even tried to fastboot something over to it, but to no avail, still not found.
If I try to do a factory reset, it boot loops. If I sneeze it boot loops.... I don't know what to do, and if I trade it in under warranty, I have to reset it to stock rom, or they're going to charge me for a new phone. Any ideas!?
I have Cyanogen mod 7 on here.
have you tried a fastboot wipe? or have you tried to reboot to recovery from adb?
First, I don't trust using the actual ROM Manager app to do the flashing/installing.
Since you've been flashing since the G1 days why not use Clockwork Recovery? Just go into recovery and do the necessary wipes.
So I suggest to do a complete full wipe in Clockwork, meaning wipe data, cache, and dalvik cache. Install the newest CM nightly (Which is working wonderfully BTW) and see if your problems still persists.
Edit: I didn't realize you tried to enter recovery, oops. But yeah try what the buy above me said. Try re-installing the latest CWM recovery, if that still fails then try heading into there via ADB.
mackster248 said:
First, I don't trust using the actual ROM Manager app to do the flashing/installing.
Since you've been flashing since the G1 days why not use Clockwork Recovery? Just go into recovery and do the necessary wipes.
So I suggest to do a complete full wipe in Clockwork, meaning wipe data, cache, and dalvik cache. Install the newest CM nightly (Which is working wonderfully BTW) and see if your problems still persists.
Click to expand...
Click to collapse
I second that, flashing ROMs from ROM Manager a terrible idea.
Well...if all else fails and if you are really thinking about returning it and still under warranty...few seconds in the microwave method should work just fine. They wont be able to see that its rooted if the phone wouldn't turn on, would they???
glimmer of hope...
So by the grace of god I did get it flashed back to unrooted, stock 2.2 by putting it as pd15img.zip on my sd card and going into bootloader. Once that was done I thought I would be out of the woods... I even plugged it in last night and no boot loop!! but this morning I unpllugged it (and I'm using a tmobile cable for the phone attached to my pc) and here it sits, next to me again with the battery out of it because everytime I try to turn it on (for over 40 minutes now) it boot loops to that stupid white screen (that is honestly driving me insane at this point). I know that it isn't rooted (because I dl'ed rom manager and it won't let me do anything without being rooted) so do we think that I'm safe to go to the store today to request a new one be sent? Thoughts? And thanks for the help thus far!
yeah I would send that back
Bad emmc chip? I'm sorry man, that's a terrible story.
Sent from my HTC Glacier using XDA App

Stuck in the CW recovery screen, tried everything.

I searched everywhere, but can't find the same problem as mine. I am stuck in the CW recovery screen, after rebooting times after times.
I have been updating the CM9 nightly for a while, didn't have any problem. But when I tried to flash 02-17 nightly, I messed up and in the middle of the install (flash), I hold the power forcing to reboot. Now, it keeps going loop back to the CW recovery screen every time I tried to reboot.
--
I tried to reinstall the whole thing with the boot-able sdcard, but didn't work. please help! someone?
I tried to wipe, reformatted the system, data, cash, boot. Still stack at the cw recovery screen. Help...
I love my nook and have a road trip coming up. It will be nice to watch a kid movie to keep the kids entertained.
Had you flashed CmWR into eMMC?
Check the ROM information on /dev/block/mmcblk0p2.... this sounds a LOT like the problem 12paq had...
http://forum.xda-developers.com/showthread.php?t=1495913
@Dizzyden, thanks for the tip.
I did repartition to 1g/5g awhile back. I am not sure where to start. 12paq tried many things, which one was the solution? Your rombackup.zip?
Many thanks....
@votinh
what do you mean? I am not using the N&O apps or OS. Pure CM9, therefore I guess it is flashed in eMMC. If not, please advice.
DizzyDen said:
Check the ROM information on /dev/block/mmcblk0p2.... this sounds a LOT like the problem 12paq had...
http://forum.xda-developers.com/showthread.php?t=1495913
Click to expand...
Click to collapse
how can I check this"Check the ROM information on /dev/block/mmcblk0p2"?
please advice.
I tried to adb shell the nook, but not devices found? please help.
Finally, with the help from the good people of this forum, I was able to restore back to B&N, and reflash CM9 from there.
Thank to you all.
Yesterday my nook color was working great. Today I turned the screen on and it hung. Now I'm having the above problem with it hanging at clockwork recovery.
I've got CM7.1 stable on there running from emmc.
can't get adb to recognize the device since it is in cwr... how did you do it?
chilimac02 said:
can't get adb to recognize the device since it is in cwr... how did you do it?
Click to expand...
Click to collapse
Install the google drivers for adb... if you are in CWR adb is enabled... just have to get the drivers loaded on your computer.
try this:
http://forum.xda-developers.com/showthread.php?t=958748
dumper1234 said:
I searched everywhere, but can't find the same problem as mine. I am stuck in the CW recovery screen, after rebooting times after times.
I have been updating the CM9 nightly for a while, didn't have any problem. But when I tried to flash 02-17 nightly, I messed up and in the middle of the install (flash), I hold the power forcing to reboot. Now, it keeps going loop back to the CW recovery screen every time I tried to reboot.
--
I tried to reinstall the whole thing with the boot-able sdcard, but didn't work. please help! someone?
I tried to wipe, reformatted the system, data, cash, boot. Still stack at the cw recovery screen. Help...
I love my nook and have a road trip coming up. It will be nice to watch a kid movie to keep the kids entertained.
Click to expand...
Click to collapse
It may be that your "boot to recovery" flag is set, and if so, it will always boot to that until it is cleared. When the cyanogenmod logo comes up hold the n button until the boot menu comes up. Then choose boot to emmc. If it works, go to ROM Manager and flash a new CWM Recovery to emmc.
Welcome to the nightmare I lived last week. Don't worry I woke up, was able to fully recover and forget the dream ever occurred.
I to tried to reformat to 1gb/5gb and ended up in the same boot loop.. If you are in the same spot I was, your boot partition got wiped out. And you may notice EMMC is gone.
After much searching I came across a file... Looking....Looking...Looking...
..........................Ah yes here it is. Here is what worked for me.
1. Boot to recovery (Should be easy at this point)
2. Format System, Data, and Cache.
3. Install the attached Zip file. (RecoveryFix.zip), this should recreate the Boot partition and fix the EMMC.
4. Reboot to recovery
5. Install favorite Rom or restore from backup.
6. Reboot to test.
Again this is what finally worked for me, and I went through a lot of trial and error to get there. I am guessing at your situation being exactly the same as mine.
PS. Ignore my since of humor if you need to.

Categories

Resources