OOOPS... I meant what is the functionality of a LOCKED Wing without a Tmobile SIM card or with a different foreign SIM card.
In case I cannot get mine unlocked in the first 90 days, can I still use the Wing for things other then making calls?
What happens if a different SIM card is put into a TMobile locked device.
Thanks!
Could someone please tell me if a Wing starts up without a SIM card in it...
If you could just try to turn it on without the SIM and tell me the results I would be very happy...
Or with a SIM other then TMobile on a locked Wing...
Just in case I have to wait for 90 days to have it unlocked from Tmobile to use in Europe.
Thank You!
Mine works. I just took the SIM out and restarted. the phone application came up and reported that the SIM was missing, but I was able to close it and access all of the other functionality.
Does that help?
qwkynuf
Yes, it helps perfectly, since now I know that I could still use the phone and wifi, etc, even before it is unlocked which might take a while.
Thank you very much!
Hi I'm new user of T-Mobile Wing. I found a thread on this forum that most of T-mobile wing don't have simlock. I get my sim card from era (polish carrier) and put inside wing. Then turned on and everything is working. It has found a service. But I still have some doubts. One is that the service name is T-mobile ( which is normal in my nokia using era because of roaming policy of my carrier) but I'm not sure if I leave USA the phone will work or not. I'm not sure how sim lock work here in USA. Should the phone report problem with other sim card when I turn it on? Or maybe it will stop working when I will come back to Poland.
From the other side when I put T-mobile sim card into my old nokia which is locked, the phone reported error "device is secured, please provide code" ( <- this is free translation from my polish)
I assume the same sittuation should appear in case of wing with era sim card, but it is my first pda and I don't know if in this case my assumptions are correct.
Thanks in advance for your answers.
yes its sim locked
you can get it unlocked so it does thru some companys try search in google.
So why right now when I put sim card from different carrier I'm able to use the phone and make calls??
yep. I've got wing registered in era without any unlocking.
huh. thats really strange. it may be some weird kind of roaming. update when you receive your phone bill? If it's kind of ridiculous, you know you need to sim unlock.
I believe that if you get a tmobile sim(prepaid or borrow one?) you can ask them to give you the simlock code and they will
I am thinking of selling my hero for round £150 because i can just not sort out the problem it has so maybe some1 with abit more knowledge will be able to sort it. It all works fine apart from the problem with the sim card which is for some reason it does not register any sim cards. The phone is unlocked and i was using a 3 sim card in for about 2 months but then all of a sudden i lost connection and then i could not reconnect with any sim card =/ i have tried different firmwares and radios but nothing seems to help. It certainly isn't barred i know that so i really duno what is up with it but would be a bargin for someone who does know. P/M if your interested
It ssems like phone has been blocked.Did you buy it from previous user? Contact him/her , or the branded supplier with imei number for their explanation.
no it use to be on contract but had a problem and came off but it hadn't been blocked by them i was using it for a while after i had come off use to work fine then it just did this. I have heard there are problems with 3 sim cards sometimes thow so wondering if it was the sim cause other sims just get stuck on the registering bit like the sim unlock hasn't worked
Just curious, but why haven't you contacted whoever you bought the phone off?
Definitely sounds to me like the handset has been barred. If you bought it as part of a contract, but then cancelled the contract early, well it makes sense for the operator to bar the handset if you didn't send it back.
Quick call to 3 (assuming that's who you bought it from) should give you an answer.
no its a tmobile i shall ring them tomorrow see what they say
Wavesecure in ROM, allowing to lock / locate / wipe your device remotely in the event of loss and be notified if the SIM is changed.
that doesn't really solve none working sims though does it ?
iv just paid for an imei check and just waiting for the result now
this phone is blocked by tmobile but not by other networks that is why it registers on tmobile but wont make calls or texts so am wondering if its something to do with the unlock code iv put in =/
I'm trying to find out if anyone has tried doing this. For some reason when I install the sim from my gophone in the HD2 it doesnt say that there is no sim present, but it also wont give me the option to unlock the phone or make a call. If I hit the phone button nothing comes up. Oh yea, Mines the T-Mobile US version >_>
does it work with a regular t-mobile sim card?
Some phones require sim unlock with original SIM carrier in it - once code is typed in then it easily recognizes other SIM cards (AT&T in your case)
I have the unlock code for my phone. I just cant get the panel that asks for it to come up.
Oh and no I cant use it with the regular card because I have to go to the local tmobile shop on monday. I was told by tmobile that some how my sim number must have been a reissued number because it was registered to someone else and now I have to go pick up a new sim card.
My AT&T card was not recognised by my 9193 at first.
I had to put it in and try several times. Pushed it way down in the slot after lightly using a pencil eraser on the contact surfaces and off it went. Hasn't missed a beat in a month.
It's odd, cant seem to get it to work .. It doesnt say there is no sim like it does when I completely take it out, but it still wont let me bring up the phone panel. I've tried wiggling it, Putting it in 50 different ways... nothing seems to work.
Hi all, I'm new here and before I tell you the problem, I appreciate all the info on these forums and the work that is put into everything. Thank you in advance.
So, I have a locked Rogers branded X10a, and I was unable to get the SIM unlock pin. So, I got the network unlock code, but whatever sim I put in, the screen always reads "no sim card" in the phone and then the activating screen loads and continues to load forever. Under settings (without a sim in the phone), there is the option for sim unlock pin, but that is the code that I am unable to get after numerous tries on different sites.
How can I get to the screen to enter the sim network unlock code if the phone in not recognizing any sim cards that I put in? Btw, I'm using AT&T. Any help would be greatly appreciated. Sorry for the length of this post and thank you.
I had similar issue my w580i. I had it after putting the unlocking code it stop recoganising SIM, havn't solution till now
Did you try using a different Rogers sim?
I don't have a rogers SIM, only AT&T. I bought the phone locked and just figured I would be able to get an unlock code like all the other phones I've had before, but no dice.
Check your pm
Sent from my X10a using XDA App
I just tried to put in my deactivated Rogers SIM card from long time ago, and I am also getting "No SIM Card" ... Not sure if your problem has anything to do with Rogers Wireless used to be "Rogers AT&T" before
If you have any friends has SIM card from different carriers, try to put those in and see if you experience "No SIM Card" issue.
Regards
Mabye it does.. I'll try and find someone with a Tmobile sim I guess.. thanks for the advice though..
Please keep me updated on this, I'm trying to unlock my X10, I got the code from cellunlock.net through the manufacturer and keeps telling me after I enter the code that it was unsuccessful.
I still can't unlock my phone either but I'm not sure about the SIM unlock code you're talking about. Are you talking about the IMEI? or the actual code that's used to unlock the phone? I've tried Mobileincanada.com but they couldn't unlock my phone and gave me a refund and I'm still waiting for this dealer on ebay. Good luck dude, keep us posted
junkk29 said:
I still can't unlock my phone either but I'm not sure about the SIM unlock code you're talking about. Are you talking about the IMEI? or the actual code that's used to unlock the phone? I've tried Mobileincanada.com but they couldn't unlock my phone and gave me a refund and I'm still waiting for this dealer on ebay. Good luck dude, keep us posted
Click to expand...
Click to collapse
Got an unlock code, www.cellunlock.net
Make sure to pick the Sony Ericsson Manufacturer code it's 34.99 but well worth it. It works now.
the manufacturer unlock code is the one I got, but I just don't get the option to put it in because the phone doesn't recognize the AT&T sims that I've put into it...
Jikenda said:
the manufacturer unlock code is the one I got, but I just don't get the option to put it in because the phone doesn't recognize the AT&T sims that I've put into it...
Click to expand...
Click to collapse
How old are the sim cards? If they are old, get new ones. Also, try re-installing the firmware through seus and then putting in your sim card. I never had that issue, I just had a hard time finding the code.
I had a real old one from cingular, but then I just went to AT&T and got a brand new one, but same issue. I'll try updating and see if that helps, but will the phone update without a valid sim inserted?
Jikenda said:
Hi all, I'm new here and before I tell you the problem, I appreciate all the info on these forums and the work that is put into everything. Thank you in advance.
So, I have a locked Rogers branded X10a, and I was unable to get the SIM unlock pin. So, I got the network unlock code, but whatever sim I put in, the screen always reads "no sim card" in the phone and then the activating screen loads and continues to load forever. Under settings (without a sim in the phone), there is the option for sim unlock pin, but that is the code that I am unable to get after numerous tries on different sites.
How can I get to the screen to enter the sim network unlock code if the phone in not recognizing any sim cards that I put in? Btw, I'm using AT&T. Any help would be greatly appreciated. Sorry for the length of this post and thank you.
Click to expand...
Click to collapse
I had that same problem. Call AT&T or go to your AT&T account online and get the PUK number. Also, did you call AT&T and told them you have a new phone? They need your phone's new IMEI number.
RumpleStealthSkin said:
I had that same problem. Call AT&T or go to your AT&T account online and get the PUK number. Also, did you call AT&T and told them you have a new phone? They need your phone's new IMEI number.
Click to expand...
Click to collapse
I'm sorry, what is the PUK number for and also, why does AT&T need my IMEI number? I mean, the phone is still locked to rogers right now regardless, right?
Lots of noob questions, sorry.
Also, i already spoke to AT&T, Rogers and Sony Ericsson about the issue, but none of them are any help of course. The PUK did nothing for me either. I feel like I am running out of options here...
welcome to the club
http://forum.xda-developers.com/showthread.php?t=717414&highlight=phone+stuck
so far no solution
So, I tried repairing through PC Companion and then I also ran the update and go the newest firmware installed now, but still same problem. Phone does not recognize the AT&T when inserted and therefore, no option to enter the network unlock code. Any others have any luck/make any progress??
wow... i guess i'm in the club as well. I just got back from the Rogers store and they wouldn't let me replace the phone anymore. I've bought the manufacturer's code which is suppose to work 100% but it didn't...so desperate
Sorry to hear that...
You said the code you got didn't work? In what way? did you try to get a refund by providing video evidence?
On a side note, does anyone know how to access a keypad on the x10 that enables you to imput the left arrow, *, * left arrow method to input the code? I realize I need to have a valid rogers sim inserted in order for this to work, but I do not see how to input the arrow keys. Any suggestions? As I've said, I'm new to android and to a device with no physical keyboard, so maybe this is very simple...
thanks and good luck to others in the same spot as me right now..