I'm on (or was) Gingerbread "ota" (second leak), and trying to sbf back to 2.340.
Using 2.340 SBF, on RSD lite 4.8, I get the error:
Failed flashing process. Phone[0000]: Error getting subscriber unit checksum. Device API Error: 0xE003003F. Command: RQRCS (0xE403203F); phone connected
Also, I cannot boot into the recovery.
Please help.
Other possibly relevant info:
Windows XP
RSD LIte 4.8
Not rooted (on GB)
Battery pull, only results in loading up the bootloader again (without pressing any buttons)
Bootloader says:
BOOTLOADER
30.04
Code Corrupt
re-download the SBF file (or check the checksum). Attempt to reflash again.
Will Re-Download SBF, however I've used this SBF before successfully.
I'm also now downloading RSD 4.9 rather than 4.8.
found this: Do a battery pull...then hold the home button and power at the same time to get into recovery. Press the search button, and use the volume button to select factory reset. Let it do it's thing, and select reboot system now...after that, it should boot.
snwagner said:
found this: Do a battery pull...then hold the home button and power at the same time to get into recovery. Press the search button, and use the volume button to select factory reset. Let it do it's thing, and select reboot system now...after that, it should boot.
Click to expand...
Click to collapse
I stated in my OP, that I cannot get into recovery. I know how to, but I cannot.
UPDATE:
Did all that was stated above, and was able to SBF.
However, once the SBF got to the rebooting process, it remained in a bootloop.
I am able to get into recovery now. And I did a factory wipe.
Still in bootloop.
SUggestions?
Pull battery...hold volume up and down then power....after about 3 seconds your phone will load up a black screen with white font and other stuff( debugging mode).... then plug usb to pc....load up rsd lite and flash sbf... if bootloops simply boot into recovery and wipe data... i had the same problem as you and this is how i fixed it....
Sent from my DROIDX using XDA Premium App
mr_villagomez said:
Pull battery...hold volume up and down then power....after about 3 seconds your phone will load up a black screen with white font and other stuff( debugging mode).... then plug usb to pc....load up rsd lite and flash sbf... if bootloops simply boot into recovery and wipe data... i had the same problem as you and this is how i fixed it....
Sent from my DROIDX using XDA Premium App
Click to expand...
Click to collapse
If you read my above post, I said that I did basically exactly what you just said. Im still in bootloops.
Oh sorry i thought that person mentioned holding the power button instead of the volume buttons... did you try rebooting your pc before using rsd again? If that doesnt work maybe try uninstalling drivers and rsd then reinstalling again.
Sent from my DROIDX using XDA Premium App
ITS ALIVE!
THE SOLUTION
I factory wiped like 3-4 times and then rebooted and it worked!
doronster195 said:
ITS ALIVE!
THE SOLUTION
I factory wiped like 3-4 times and then rebooted and it worked!
Click to expand...
Click to collapse
I joined the party late. Yea cwm sometimes wipes like a dirty person. I would always recommend doing it a few times when switching roms or in your case. It can't hurt the phone and sometimes the first wipe doesn't work.
im having the same problem!!!
except im STUCK on the
home+volume up+power screen
i used the same sbf i did the first time from the leaked gb and it worked fine
and well i downloaded nightlies to get liberty on my phone, and i wasnt a big fan of the text msg layout so i tried to clockwork mod (flash) into the deoxed gb but i still had a liberty boot and i thought nothing of it so i continued on and the phone worked fine itll it said gbkeyboard failed and i couldnt do anything!
so i turned it off and when i turned it back on flashwork was on!!! so i flashed the gb leak without root (the first one) and then i wanted root so i did the sbf but this time it said fail and my screen said it was still installing so i pulled the usb and the phone still said installing
so i battery pulled and my phone said code corrupted
so i tried the sbf back x3 still getting the same fail then i got to the part im at now,
code corrupted
battery low
cannot program
i left it on the charger for like an hour and its still "low"
am i soft bricked or hard?
[btw im stuck in the mode]
piax said:
im having the same problem!!!
except im STUCK on the
home+volume up+power screen
i used the same sbf i did the first time from the leaked gb and it worked fine
and well i downloaded nightlies to get liberty on my phone, and i wasnt a big fan of the text msg layout so i tried to clockwork mod (flash) into the deoxed gb but i still had a liberty boot and i thought nothing of it so i continued on and the phone worked fine itll it said gbkeyboard failed and i couldnt do anything!
so i turned it off and when i turned it back on flashwork was on!!! so i flashed the gb leak without root (the first one) and then i wanted root so i did the sbf but this time it said fail and my screen said it was still installing so i pulled the usb and the phone still said installing
so i battery pulled and my phone said code corrupted
so i tried the sbf back x3 still getting the same fail then i got to the part im at now,
code corrupted
battery low
cannot program
i left it on the charger for like an hour and its still "low"
am i soft bricked or hard?
[btw im stuck in the mode]
Click to expand...
Click to collapse
After the FULL sbf fails do the SYSTEM only and you should be good.
piax said:
im having the same problem!!!
except im STUCK on the
home+volume up+power screen
i used the same sbf i did the first time from the leaked gb and it worked fine
and well i downloaded nightlies to get liberty on my phone, and i wasnt a big fan of the text msg layout so i tried to clockwork mod (flash) into the deoxed gb but i still had a liberty boot and i thought nothing of it so i continued on and the phone worked fine itll it said gbkeyboard failed and i couldnt do anything!
so i turned it off and when i turned it back on flashwork was on!!! so i flashed the gb leak without root (the first one) and then i wanted root so i did the sbf but this time it said fail and my screen said it was still installing so i pulled the usb and the phone still said installing
so i battery pulled and my phone said code corrupted
so i tried the sbf back x3 still getting the same fail then i got to the part im at now,
code corrupted
battery low
cannot program
i left it on the charger for like an hour and its still "low"
am i soft bricked or hard?
[btw im stuck in the mode]
Click to expand...
Click to collapse
the low battery keeps it from being able to sbf (which is good because if it dies during an sbf, you are hard bricked. Since i am too lazy to type out full instructions, here is a quote from sysadmin x's guide
IF YOUR PHONE DIES DURING SBF
How to Fix
One thing that you may notice is that when you have this error, your phone will not charge the battery and you'll only be able to see the screen turn on if its plugged into the wall. Somewhere on the screen it will say "Your Battery is Low" and "Cannot Reprogram" or something like that. The easiest way to get through this is to find a friend with a charged battery or go to your local Verizon store and see if they have a demo phone they can use to charge your battery. If you're like me though you will not be lucky in any sense like this so you will have to find the MacGyver inside of you and get a little creative. What you need for this is an old USB cord. One end must be a standard USB cable head and the other can pretty much be anything. Once you have that, follow these steps:
NOTE: I TAKE NO RESPONSIBILITY FOR DAMAGE DONE TO ANY PHONE, BATTERY, ETC. FOLLOW THESE STEPS WITH CAUTION TO AVOID RISK OF DAMAGE.
1. Take your cable and cut off one of the ends, leaving a standard USB plug at the opposite end to plug into your computer.
2. Now you need to strip about and inch of the wire off until you get to the core where you should see 4 colored wires (red, black, white, and green). The colors don't really matter and they may vary, just as long as you can see a red wire and a black wire.
3. Strip off about a quarter inch of the rubber sleeving on the red and black cables, exposing the actual metal wire.
4. Twist the metal strands of each of the wires a couple of times so that all of the wires from the black cable are together and all of the wires from the red cable are together. This is just to make sure that you don't create a short circuit.
5. Here's where it gets a little tricky. You are going to use this cable to make the phone think the battery is fully charged, when in fact you will just be powering the phone using the power from the USB port. Pull out the battery on your phone and find the 4 exposed metal slots (the battery terminals).
6. Each of the far terminals should be labeled with a plus (+) or a minus (-). What you need to do is put exposed leads on the red wire up to the positive terminal and the leads of the black wire up to the negative terminal.
7. While still holding the leads on their respective terminals, slide the battery back into place in the phone. MAKE SURE THE WIRES ARE NOT TOUCHING WHEN YOU PUT THE BATTERY INTO THE PHONE! BAD THINGS COULD HAPPEN ONCE YOU PLUG THE CORD INTO THE COMPUTER!
Note: As tested by parm289, you can skip step 7 and just use the cable to charge the battery if you'd like. He recommends allowing it to charge for 6-7 minutes before placing it back into the phone. Thanks parm!
8. Once the battery is in place and the wires are on the correct terminals but not touching each other, plug the USB cord into the computer. If all has gone as it should, the screen on your phone should come on (may have to press the power button) and the phone should be telling you that the battery charge is okay and that it is okay to program. YAY! Your phone is almost back to normal!
9. Go back up to the previous section in this post that tells you how to reflash the .sbf and follow all of the instructions there. Once that has finished flashing the .sbf to your phone, your phone should be back to working order! You will most likely have to redo the entire setup on your phone but at least your phone is no longer a fancy paperweight
Click to expand...
Click to collapse
Borrow someone's droid x battery, or their phone to charge yours. that's gonna be alot easier than trying to strip the wires down. Also, check with p3droid (team black hat) they've been working on some fancy usb cables that will charge and flash.
thats exactly what the quote said, the numbers were there in case you cant get a charged battery. a last resort besides cutting the cable, you can go to verizon and ask to borrow a show floor battery, and give em yours so you can sbf. verizon is usually pretty nice
wow!!! thanks!
...but
now rsd says flashing failed
and the phone says its still installing
=/
I know the feeling! I have tried getiing into recovery from rooted GB usually just have to battery pull but have had to SBF for the 6th time. GB is great I benchmarked 2144 with Quadrant. Glad you fixed your phone.
And to think I went to Verizon and they wanted to send it to Motorola which they warned might charge me $300...
They also look at the battery to see if there's water damage... so this means you can just get a different battery and voila no water damage...
maybe if i use a different computer???
best part in all this i lost internet connection at home for a week
-.-
FFFMMMLLL
temp on blackberry storm ='[
i DOWNGRADED!!!!|
...ideas?
Related
Hi everybody
I have Motorola Defy, but after I plug in the usb cable to defy and PC , rsd lite 4.9, 53.1. or 5.5 doesnt recognize my device..
After plug in it shows only white led and nothing more, nothing at all...
I tried every method , but unsuccessfull...
Everytime i try tu plug in, it just shows white led, nothing more, screen is black, and PC doesnt recognize it at all...
What should I do to unbrick it ???
Pls help, I'm desperate ... Thank you
PS: I tryed every method, I searched almost everywhere
When you plug it in first make sure battery full charge then load rsd lite and under settings change it to first come first serve. I had same issue and this worked.
Sent from my MB501 using Tapatalk
I'm having the same issue.hopefully it works I'll get back to you after that
Sent from my SGH-T989 using Tapatalk
Have you tried entering bootloader and then connect the phone to PC? I got RSD lite recognizing my phone this way.
yuffany said:
Have you tried entering bootloader and then connect the phone to PC? I got RSD lite recognizing my phone this way.
Click to expand...
Click to collapse
I can't power up the phone, I can't enter boot menu or even download mode, nothing, before brick: I just plug usb into phone and usb and i could flash througt rsd whatever I want to but now I plug the usb cable into a phone and PC dooesn'r recognize my defy...
Just white led and black screen...
djmajino said:
I can't power up the phone, I can't enter boot menu or even download mode, nothing, before brick: I just plug usb into phone and usb and i could flash througt rsd whatever I want to but now I plug the usb cable into a phone and PC dooesn'r recognize my defy...
Just white led and black screen...
Click to expand...
Click to collapse
??
Have you tried my suggestion.. I had same issue.. black screen with white lite.. you need to have full battery then plug the phone in and run rsd lite with settings on first come first serve..
if
your phone does load with a full charge then hold volume up and power button to get into the bootloader menu.. after than then plug into rsd lite..
to make things easy let us know what happens after you put a batter with full charge on it.. then we can go from there..
yes , I have full battery, I set the rds lite to option firt-come-first-serve, but nothing happend
I can't get into bootloader, I can't power the phone up, I can't get into mode... Nothing
Still the same probem, still not solved, Any idea what could be with it ??
Check the drivers
Sent from my GT-P1000 using xda premium
djmajino said:
yes , I have full battery, I set the rds lite to option firt-come-first-serve, but nothing happend
I can't get into bootloader, I can't power the phone up, I can't get into mode... Nothing
Still the same probem, still not solved, Any idea what could be with it ??
Click to expand...
Click to collapse
try these steps..
take phone battery out and wait few seconds..
then put batter back in and hold volume up and power button for few seconds.. let go of power button and then let go of volume up button..
your phone screen will still be black and no light will be lit up..
then connect usb cable to phone then to pc.. after that you load up RSD lite with the setting of first come first serve.. you should see a line in middle of window that says.. "connected" at this point your phone might display white light ..it sometimes doesn't but as long as rsd lite shows connected your fine.. at this point you should be able to run sbf files
The defy doesn't even power up when I push the power button
djmajino said:
The defy doesn't even power up when I push the power button
Click to expand...
Click to collapse
are you reading the steps??? clearly says that the screen might not light up or lights might not turn on..but thats ok..
before we do all this did you make sure your battery is fully charged?
please read my last steps carefully and try it out..i was in same boat and worked for me
dilfatx said:
are you reading the steps??? clearly says that the screen might not light up or lights might not turn on..but thats ok..
before we do all this did you make sure your battery is fully charged?
please read my last steps carefully and try it out..i was in same boat and worked for me
Click to expand...
Click to collapse
I tried McGyver hack, phone was connected, I did flash 2.51.1 UK version non carries, but nothing did,
On screen was:
SW update
In progrees
at RSD was Phone is being rebooted and PASS, but nothing on phone screen
Defy is working againg, but I was at the service
so using the MacGyver hack method enabled your computer to see your phone again?
I have the same problem (flashed wrong rom, phone bricked with just a black screen, flashed the same wrong rom again hoping for a different result, still bricked, read up on what was going wrong, came back the next day and my computer (including RSD Lite) could no longer see my Moto Defy. Next step i'm either going to have to (1)borrow another Moto Defy battery that is guaranteed fully charged (i have no way to check the amount of charge in mine while my Defy is out of action) or (2)cut up a USB cable and do the MacGyver hack.
1. Make sure your battery is charged.
2. Make sure you've all the latest drivers from Motorola's Website installed.
3. Make sure your RSD Lite version is atleast 4.9. I use v5 and had no problems till now.
4. Boot into bootloader mode.
5. Flash
If it doesn't work:
Try MacGyver hack.
In case you don't know what it is, search here in xda forums. You'll find it.
Update your drivers and do the same as above
Sent from my MB525 using xda premium
Same as above worked 4 me I needed to put on the latest gb rom the non downgrade one.
defy cm7
komakaze said:
Next step i'm either going to have to (1)borrow another Moto Defy battery that is guaranteed fully charged (i have no way to check the amount of charge in mine while my Defy is out of action) or (2)cut up a USB cable and do the MacGyver hack.
Click to expand...
Click to collapse
Option 3 is to buy a cheap standalone wall charger for the Defy battery off eBay, like this one, to keep your battery charged between attempts to flash the phone. Gotta be less risky than the McGyver hack.
Not sure if the standalone wall charger will work, seems to me that the phone doesn't actually recognise the battery, however I have no means to test this and it's just a guess.
If it does actually detect your battery level but just can't charge it then what you listed is fine.
hope for defy with only white led light turning on. This assumes that you have already have mototola drivers and RSD lite installed.
Background : I only had defy one day when I decided to flash it with miui. I bricked on the first time with bootloops. Did research and got drivers and rsd lite. managed to find three stock t mobile roms and flashed to stock Tom, then flashed miui, since then I've been switching between miui and cm7.
Problem : After a few months of use, I decided to flash stock rom to see how the battery life would be like. Bricked it the first time with bootloops. I thought I had flashed it with wrong rom because the first time I flashed back to original rom I did not delete the roms that I thought were the original roms. So after first failure I tried to flashed with the other roms I had. after the third rom it would not go into bootloader, only white led would turn on. Tried macguiver, did not work so save your usb cable, don't mess with it ain't gonna work.
Two part solution: I realized that when I plugged phone with usb I would hear the usb tone on win 7. When to device manager and saw the other device or something like that was appearing and disappearing when I would connect and disconnect phone. I clicked it and it said Motorola device or something like that, it was sensing my defy! defy drivers were wipe out due to bad flash. I had mototola drivers so I clicked on update and searched for mototola drivers on hard drive. I had rsd lite on and it recognized the defy after driver update, even though the bootloader screen was not on and just the white led was on.
decided to flash rom that have me bootloop and it flashed it but still gave me a bootloop., by the way, the update part of bootloader showed up after a while.
Second part of solution: Please Google defy stock rom!!! googled problem and found out that the phone has a stock recovery. its the robot with the triangle exclamation mark. when you get to it you have to touch the extreme lower right hand corner of the screen to get to where you can wipe data and cache. when you start wiping data / cache you have to press on ok?? on lower left hand of the screen repeatedly until wipe is complete. then reboot and tada it boots up to stock tmo USA defy.
this is the stock rom I used : JORDN_U3_6.36.0
F Y I
if you ever try to flash a rom and it just bootloops, just go into stock recovery and wipe data and cache and you should be able to boot into android.
---------- Post added at 05:37 AM ---------- Previous post was at 05:30 AM ----------
Sorry, Google defy stock recovery!!!
Sorry if the answer is out there but I can't find it.
Here is the status of my Defy:
Tried flashing SBF with RSDlite after my recovery stopped working- install of twrp had problems- tried install new recovery- tried factory reset... and I got stuck in a bootloop.
Now RSD says "PASS", but phone wont boot. Tried taking battery out with power & volume buttons pushed, but it wont even enter that black screen bootloader.
I've tried flashing SBF again, no luck.
What can I do?
Keep trying to flash different SBF via RSD despite not getting into bootloader?
EDIT: Now not even charging light coming on even when hooked up macgyver
are you using the right kernel versions??? I flashed with a 231 version without knowing you cannot downgrade once you go higher so If I try to flash anything lower I get a error at boot or it just wont boot at all like you say. If you can try to flash the version you had on there before your problems then that would be the way to go. Or if you have tried to flash a higher version threw RSD lite then you will have to try that.
RSD lite should boot the phone for you if everything went well. I got a defy + so cant comment what SBF to flash.
notes1 said:
Sorry if the answer is out there but I can't find it.
Here is the status of my Defy:
Tried flashing SBF with RSDlite after my recovery stopped working- install of twrp had problems- tried install new recovery- tried factory reset... and I got stuck in a bootloop.
Now RSD says "PASS", but phone wont boot. Tried taking battery out with power & volume buttons pushed, but it wont even enter that black screen bootloader.
When I try turning it on the white LED (charging) turns on, but thats the only response I can get from my phone.
I've tried flashing SBF again, no luck.
What can I do?
Keep trying to flash different SBF via RSD despite not getting into bootloader?
I get black screen showing "SW UPDATE IN PROGRESS.."
But then can't start phone.
Click to expand...
Click to collapse
if you are getting no boot what so ever try flashing a fixed sbf and starting all over again? 1.Download this SBF and Flash it
2.Root your Phone
3.Download 2nd Init 1.4.2 and Install ClockworkMod Recovery
4.Download and install this Nandroid Backup << FILE DOWN, please if you happen to have this file PM me>>
5.Enter Recovery, Wipe Data/Cache
6.After wiping, turn off your phone
7.Turn it on and get immediately into Bootloader mode
8.Flash this Fixed SBF
9.Delete Data/Cache again and reboot.
go on this link to get all of the files at the bottom of page:- http://forum.xda-developers.com/showthread.php?t=1216982
i was running ICS CM9 on a froyo kernel...
or you can always try this way http://forum.xda-developers.com/showthread.php?t=1618718 ??
thanks but i've been to those threads before I posted this.
RSDlite DOES NOT recognise my phone anymore after the two failed sbf flashes, and I now cannot access bootloader.
the only sign i have that anything is working is the white charging led (and thats only on usb not on charger).
is it completely screwed???
no its never screwed. You may of ran your battery flat. Search for the method to use a old USB cable and cut the end off that plugs into a device and use the red and black wires and put the red on positive and the black on the negative of your battery terminals then slide the battery in to hold the wires in place.
When you boot the phone hold down the volume up button so it goes into bootloader. Its a matter of finding the right SBF file, You may need to flash a higher version then you where using its not ideal but if it saves you from buying another phone it will be worth it.
The highest is 231 but you have to flash 2 more SBF ontop to get it to root as you cannot root it apart from using the pre rooted SBF files.
here is a list of SBF files you surly could get one to work. http://forum.xda-developers.com/showthread.php?t=966537
It may take you a few goes but something will work, try to flash a lower version then work your way up.
tried macgyver it, got it to show up in rsd so tried flash despite not getting into bootloader. RSD says PASS, but still can't boot.
charging light isn't showing either now, but the computer recognises the usb (when battery is hooked up macgyver style) at least. so there is hope.
do I need a new battery?
no you wont need a new battery. Dont leave the cable hard wired to the battery for extended periods as its not the ideal way to charge it and it can over charge the battery.
Your phone wont charge in the state its in with the USB cable attached that is why you need to use the macqyver way.
There will be a rom that will flash. If its being a real pain then flash one with the heighest CG version, you wont be able to flash any lower then that as you cannot downgrade once you go higher.
I have a defy + so cant comment on what SBF files to try but I am sure there is one out there that will work. Also there is a red and green lens defy so you might need the right rom for the right phone.
have you read and tried the all in one defy guide?? there is a few links to SBF files in there and there is a problems bit down the bottom with a SBF and instructions to fix problems
notes1 said:
Sorry if the answer is out there but I can't find it.
Here is the status of my Defy:
Tried flashing SBF with RSDlite after my recovery stopped working- install of twrp had problems- tried install new recovery- tried factory reset... and I got stuck in a bootloop.
Now RSD says "PASS", but phone wont boot. Tried taking battery out with power & volume buttons pushed, but it wont even enter that black screen bootloader.
When I try turning it on the white LED (charging) turns on, but thats the only response I can get from my phone.
I've tried flashing SBF again, no luck.
What can I do?
Keep trying to flash different SBF via RSD despite not getting into bootloader?
I get black screen showing "SW UPDATE IN PROGRESS.."
But then can't start phone.
EDIT: Now not even charging light coming on.
Click to expand...
Click to collapse
Download this sbf: JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf.gz else visit here http://forum.xda-developers.com/showthread.php?t=1618718 Download the sbf files from top and see. sbf on the beginning of the page are the latest. Your phone will work. It just about flashing the correct version.
Did you wipe data and cache using stock recovery! ? Just sayin' !
Sent not from your device!
ryan8r said:
Did you wipe data and cache using stock recovery! ? Just sayin' !
Sent not from your device!
Click to expand...
Click to collapse
i did. thats when i realised things were getting bad, because it had an error...
after a failed sbf flash (i think battery died), now i can't get into stock recovery or bootloader (even when hooked up macgyver).
i'm investing $12 in a new battery, then Ill try RSD different SBFs untill one works.
Q- Does it matter if I'm not in bootloader when using RSD? rsd says 'pass' but nothing seems to change on my phone.
Q- Is it worth trying to push a new bootloader onto my phone, or is that included in SBFs?
Q- Can I hook Macgyver up a wall charger or just the computer?
Not even charging LED showing now so hoping it's just a fried battery from a wrong macgyver, and I'll flash an SBF with a new battery and it'll all be sweet
you need to be in bootloader or RSD wont see your phone
Not sure about a bootloader, the one you have should be fine. You will prob have to get the phone working to flash a new bootloader anyway. Not sure if they are in the SBF or not
You can hook up the macqyver up to the phone charger to. You shouldnt need a battery with the macqyver, You should be able to spin the battery around and use the plastic to wedge the wires into the terminals and it should still work.
I wouldnt recommend prolong use of this method as you could fry the battery or phone if done wrong or left in for extended periods. I would keep a close eye on the temp of the phone and battery.
I dont think the phone charges in bootloader at all (well at least mine didnt) I started with a battery 95% and then flashed a few SBF files and left it on thinking it was charging came back and it wouldnt show in RSD. I done the macqyver method and when I got it to work it had 6% battery so it went dead flat even though it was plugged in and white light was on.
Your battery may be fine it may just be dead flat. You will also have the same trouble with the new battery, Unless you get or have a external charger for the battery so you can charge it outside of the phone. It should also tell you if the battery is faulty.
fixed!!!!
macgyver hook up, flashed tmobile usa latest sbf, despite not having bootloader showing... and it worked!
was the 4th sbf i had tried.
so to that other bloke with the same problem, good luck, keep trying!!!
thats good to know told you it was a matter of trying to find the right SBF.
I went threw the same problem and flashed maybe 10 SBF before one worked but now it seems I can use any as long as the CG version is the same. I flashed ICS and loving it so far.
now when I can get the battery to charge i'll be happy!
otherwise i'll just carry a laptop & spliced usb cable around in my pocket so i can use my phone
glad to know RSD works even with a black screen showing no bootloader!
so the battery wont charge??? try to charge it with the macqyver method for 30 mins. But it should charge if the phone is off connecting the charger up to it, Unless you get the battery with ? in the centre. You may of stuffed your battery but try to charge it first.
I have a 12v charger that hooks up to a car battery and I can use that as a last resort only battery it wont do without a attachment is a lipo. I think it can do lion fine.
Edit: Sorry I should say if you get the battery with the ? in the centre its more to do with the software then the hardware. I have ICS 4.0.4 and could only charge to 83% I copied over many battd.bin files one worked (but got to 93%) the rest came up with the battery with ? in the centre so it wouldnt charge and when I booted it said battery was full but it was only 60%. I found a fix for it (this is for defy) it was a CM7 fix and I am using CM9 but it now charges to 100% and works fine.
You should be able to flash another version with the same CG version. if you are not sure post the link up in another thread asking for the version and people will tell you. As if your on froyo then I have no clue of there versions and what can and cant be done.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
BRICKED- No Bootloader
Same Problem with my defy
notes1 said:
Sorry if the answer is out there but I can't find it.
Here is the status of my Defy:
Tried flashing SBF with RSDlite after my recovery stopped working- install of twrp had problems- tried install new recovery- tried factory reset... and I got stuck in a bootloop.
Now RSD says "PASS", but phone wont boot. Tried taking battery out with power & volume buttons pushed, but it wont even enter that black screen bootloader.
I've tried flashing SBF again, no luck.
What can I do?
Keep trying to flash different SBF via RSD despite not getting into bootloader?
EDIT: Now not even charging light coming on even when hooked up macgyver
Click to expand...
Click to collapse
aaabro2002 said:
Same Problem with my defy
Click to expand...
Click to collapse
Flash Different SBF, because you were using low version SBF
One day my defy (which used MIUI Pikachu) didn't boot up properly. It showed me a MIUI splash screen. What I did was to go to bootloader mode and installed the CEE Nordic fixed SBF I found on the net. After flashing, the phone only gave me a motorola logo. I patiently waited for 15 minutes or so but nothing happened.
I took a research on the net and found out that I had to put my phone into stock recovery mode. But when I turned off my phone (Had to do it by a battery pull), pushed the volume down button and pushed the power button afterwards, the screen was still black.
So, what mistakes did I made, are there any ways to fix my phone without bringing it to service center. I think the problem lies in the sbf files, it's only 37mb while a "normal" sbf from droid-developers is about 200mb.
By the way, if my phone is a korean one, can I use a nordic version ?
yes you can fix it. take the battery out then put it back in after a while to make sure its off.
hold down volume up and push the power on. This will get you into bootloader, It may not show anything on the screen but if you hook up the USB cable and open RSD lite it should say its connected.
Now from here you just have to find the right SBF file to flash. This may take 1 go or 10 goes (took me about 10) till I found one that works and it booted straight away.
I must warn you, Your phone WONT! charge in this state so take the battery out when your downloading the files or not flashing it or using it as it will run the battery out fast.
If the battery runs out then you will have to search and do the macqyver method
idecaf said:
One day my defy (which used MIUI Pikachu) didn't boot up properly. It showed me a MIUI splash screen. What I did was to go to bootloader mode and installed the CEE Nordic fixed SBF I found on the net. After flashing, the phone only gave me a motorola logo. I patiently waited for 15 minutes or so but nothing happened.
I took a research on the net and found out that I had to put my phone into stock recovery mode. But when I turned off my phone (Had to do it by a battery pull), pushed the volume down button and pushed the power button afterwards, the screen was still black.
So, what mistakes did I made, are there any ways to fix my phone without bringing it to service center. I think the problem lies in the sbf files, it's only 37mb while a "normal" sbf from droid-developers is about 200mb.
By the way, if my phone is a korean one, can I use a nordic version ?
Click to expand...
Click to collapse
after flashing stock rom you have to get into stock recovery & do factory reset ^^ ph should boot up after that...
if your battery is flat/dead you need to become McGyver -=or=- get extra charged battery & repeat process
After flashing CEE nordic, T-Mobile US and UK roms, I couldn't even go to bootloader mode nor recovery mode. so this is impossible to clear date.
bootloader will not show but RSD lite will say its connected, Unless the battery is flat as it wont charge in this state.
If you hook up the macqyver method and turn the phone on holding the up button and connect the USB cable. RSD lite should say that its connected if you have done it right. It took me 3 goes to get it working but once I did it worked.
It took me 10 roms before I found one that worked. So dont give up
kelbygreen said:
bootloader will not show but RSD lite will say its connected, Unless the battery is flat as it wont charge in this state.
If you hook up the macqyver method and turn the phone on holding the up button and connect the USB cable. RSD lite should say that its connected if you have done it right. It took me 3 goes to get it working but once I did it worked.
It took me 10 roms before I found one that worked. So dont give up
Click to expand...
Click to collapse
same here. macgyver worked on about the 3rd attempt (not sure why, the wires looked connected each time), and my 3rd SBF worked... then i couldn't root, flashed another sbf, and the 5th method worked...z4root, superoneclick, doroot, droid2root, and DOOMLORD worked
but now my sdcard wont load, so i got more problems... sigh... if you have warranty just get a new phone!!!
I had cm11 (or 10, not sure) installed for about a month now (back in december) .... Went on a trip, and when coming back my phone battery ran out at the airport somehow, but i had fully charged it and i was not out all day enough for it to run out fully... I take my phone home, not really giving it much importance, and i noticed it was stuck on the bootlogo.. so i went into recovery and tried to re-flash the rom and fix it, but when i was installing the ROM again, the phone shut off randomly (i heard that happened with a certain recovery menu software sometimes, i cant remember the name)... then the phone wouldn't charge and/or turn on, and when I connect it to the pc, nothing happens other than the white led coming on.. RSD won't recognize it...
So i found out i had to charge the battery manually, and used a Universal Charger... Still, no recognition by RSD Lite...
Finally, i found a way:
1. Open RSDLite
2. Connect phone (no battery on it)
3. While holding Power + Vol Up, put the battery in
4. RSD will recognize your phone!
Problem is, it recognizes my MB525 as "S Flash OMAP0360"
And when i try to flash a .sbf i used previously to recover my phone (had bricked it before by trying to change ROMs in a sloppy manner), it seems to flash smoothly, but when it's going to reboot the phone, the progress goes up to 100% and then asks me to reboot it manually.. I read somewhere that to fix that i should take the battery out, disconnect the phone, put it back in, and make RSD recognize it like i mentioned before...... and after RSDLite says flashing is PASSED, the phone still won't turn on... I have tried at least three times and gotten the same result... Help?
The SBF i am using (because it helped me save my phone before) is:
JORLA_U3_3.4.2_107-9_SIGNED_USAJORDMR1B25TIGCOLA01E.0R_JORLAFROTIGCOL A_P009_A002_M010_HWp3_WIG146037_Service1FF.sbf
EDIT: Also, i read somewhere that when all you get is the white led (when connecting to PC) it means that your battery is not charged enough for flashing.. ?
I don't know what to do?? I read that defy's are really hard to brick... But mine got bricked out of nowhere.. wtf?
Niko. said:
I had cm11 (or 10, not sure) installed for about a month now (back in december) .... Went on a trip, and when coming back my phone battery ran out at the airport somehow, but i had fully charged it and i was not out all day enough for it to run out fully... I take my phone home, not really giving it much importance, and i noticed it was stuck on the bootlogo.. so i went into recovery and tried to re-flash the rom and fix it, but when i was installing the ROM again, the phone shut off randomly (i heard that happened with a certain recovery menu software sometimes, i cant remember the name)... then the phone wouldn't charge and/or turn on, and when I connect it to the pc, nothing happens other than the white led coming on.. RSD won't recognize it...
So i found out i had to charge the battery manually, and used a Universal Charger... Still, no recognition by RSD Lite...
Finally, i found a way:
1. Open RSDLite
2. Connect phone (no battery on it)
3. While holding Power + Vol Up, put the battery in
4. RSD will recognize your phone!
Problem is, it recognizes my MB525 as "S Flash OMAP0360"
And when i try to flash a .sbf i used previously to recover my phone (had bricked it before by trying to change ROMs in a sloppy manner), it seems to flash smoothly, but when it's going to reboot the phone, the progress goes up to 100% and then asks me to reboot it manually.. I read somewhere that to fix that i should take the battery out, disconnect the phone, put it back in, and make RSD recognize it like i mentioned before...... and after RSDLite says flashing is PASSED, the phone still won't turn on... I have tried at least three times and gotten the same result... Help?
The SBF i am using (because it helped me save my phone before) is:
JORLA_U3_3.4.2_107-9_SIGNED_USAJORDMR1B25TIGCOLA01E.0R_JORLAFROTIGCOL A_P009_A002_M010_HWp3_WIG146037_Service1FF.sbf
EDIT: Also, i read somewhere that when all you get is the white led (when connecting to PC) it means that your battery is not charged enough for flashing.. ?
I don't know what to do?? I read that defy's are really hard to brick... But mine got bricked out of nowhere.. wtf?
Click to expand...
Click to collapse
Hey there. Well, if it's still flashable it ain't bricked. I've got my other one to not be recognized (broken bootloader), which is beyond usual repair. So, did you you flash some random SBF before the rescue one you're trying out now? There's a problem with previously flashed GingerBread or Defy+ SBF images. So it would be good to know, what was the SBF running before trying "JORLA_U3_3.4.2_107-9". Also according to http://sbf.droid-developers.org/phone.php?device=27 that is 2.2.1 and there's also a "Android 2.2.2 Blur_Version.34.4.802.MB525.Latam.en.01". Tried that as well?
Anyhow, if the phone is seen by RSDlite it actually powers on and is recoverable. If the screen is just staying black, then you probably tried a downgrade from a Gingerbread SBF and didn't watch out for the BL-version.
If it's a BL-version problem then this might help. Also there is a guide to unbrick. And yes, keep an eye out for the battery level. Best would be an external charger, as the phone does not charge. McGyver way should still work though.
If it shows a LED and is seen over USb, it's not dead (yet)
Also look out for section "Common Problems/Questions" here.
htto said:
Hey there. Well, if it's still flashable it ain't bricked. I've got my other one to not be recognized (broken bootloader), which is beyond usual repair. So, did you you flash some random SBF before the rescue one you're trying out now? There's a problem with previously flashed GingerBread or Defy+ SBF images. So it would be good to know, what was the SBF running before trying "JORLA_U3_3.4.2_107-9". Also according to http://sbf.droid-developers.org/phone.php?device=27 that is 2.2.1 and there's also a "Android 2.2.2 Blur_Version.34.4.802.MB525.Latam.en.01". Tried that as well?
Anyhow, if the phone is seen by RSDlite it actually powers on and is recoverable. If the screen is just staying black, then you probably tried a downgrade from a Gingerbread SBF and didn't watch out for the BL-version.
If it's a BL-version problem then this might help. Also there is a guide to unbrick. And yes, keep an eye out for the battery level. Best would be an external charger, as the phone does not charge. McGyver way should still work though.
If it shows a LED and is seen over USb, it's not dead (yet)
Also look out for section "Common Problems/Questions" here.
Click to expand...
Click to collapse
No, i have not flashed other SBF's ever... only CM roms but i did it through the phone itself, in recovery mode.. I'll try the 2.2.2 one you told me about and see how that works out!
EDIT: No luck, the phone stays at a black screen.. it wont even reboot when RSD is done flashing.. i have to take the battery out and put it in bootloader again for RSD to say it PASSED the flashing
Niko. said:
No, i have not flashed other SBF's ever... only CM roms but i did it through the phone itself, in recovery mode.. I'll try the 2.2.2 one you told me about and see how that works out!
EDIT: No luck, the phone stays at a black screen.. it wont even reboot when RSD is done flashing.. i have to take the battery out and put it in bootloader again for RSD to say it PASSED the flashing
Click to expand...
Click to collapse
Too bad Anyway, did you try 8. from here, that is
"
If you get " Please manually power up this phone " in RSD Lite pull battery out > put your battery back > reboot into stock recovery by holding Power button and Vol- button > Choose Wipe data/cache > Choose Reboot system now
"? Also holding Power and Vol-Down while inserting battery is said to work.
I wonder if there is an SBF that also flashes cache and userdata partitions...
Nope, it just stays black-screened.... It only works if i do VOL-UP for bootloader mode, but that doesnt help
Umm, as a shot into the blue: Did you try to reinstall the Defy drivers from Motorola? It seems that missing those hinder RSD lite from detecting the Phone as MB52x and instead just show the Processor identification, i.e. "S Flash OMAP3630"
Try dfp 231. The processor identification is correct( rsdlite has been set up properly).
Sent from my MB526 using Tapatalk
thekguy said:
Try dfp 231. The processor identification is correct( rsdlite has been set up properly).
Click to expand...
Click to collapse
Yeah, it worked also for the defy in this thread.
And just for reference the original thread with the hinted SBF:in post #4
"
WIIII i have successfull unbriked my defy with this rom
defyplus_u3_4.5.1-134_dfp-231_cn_sign_ucadefyemarab1b50aa009.0r_pds03c_usajr dngibrird15_p015_a030_service1ff.sbf.gz
"
Basically had the same BL7-problem.
htto said:
Yeah, it worked also for the defy in this thread.
And just for reference the original thread with the hinted SBF:in post #4
"
WIIII i have successfull unbriked my defy with this rom
defyplus_u3_4.5.1-134_dfp-231_cn_sign_ucadefyemarab1b50aa009.0r_pds03c_usajr dngibrird15_p015_a030_service1ff.sbf.gz
"
Basically had the same BL7-problem.
Click to expand...
Click to collapse
wtf, the phone flashed correctly and everything but the screen won't turn on.... The computer recognizes it as MB526 now, and i can touch the home button and stuff and it will vibrate like it used to when it worked... i can also make the ringtones play using the moto portal page... Everything works (except for calls) other than the fact that i still have a black screen... the screen just wont turn on... Also it said it had very little internal memory compared to what it had before (had at least 2 gb i think.. now not even one)
I had sent the phone over to fix, and they told me it was unfixable... Is it possible that the guy (it wasnt an official company) who "tried to fix it" simply took parts out of it ? -_- (if he had taken parts out of it im guessing the phone wouldnt turn on at all..?)
What can i do to turn the screen on??
EDIT: i flashed DEFYPLUS_U3_4.5.1-134_DFP-231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf
I couldnt find the one you posted there so i did the central europe one...
Niko. said:
wtf, the phone flashed correctly and everything but the screen won't turn on.... The computer recognizes it as MB526 now, and i can touch the home button and stuff and it will vibrate like it used to when it worked... i can also make the ringtones play using the moto portal page... Everything works (except for calls) other than the fact that i still have a black screen... the screen just wont turn on... Also it said it had very little internal memory compared to what it had before (had at least 2 gb i think.. now not even one)
I had sent the phone over to fix, and they told me it was unfixable... Is it possible that the guy (it wasnt an official company) who "tried to fix it" simply took parts out of it ? -_- (if he had taken parts out of it im guessing the phone wouldnt turn on at all..?)
What can i do to turn the screen on??
EDIT: i flashed DEFYPLUS_U3_4.5.1-134_DFP-231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf
I couldnt find the one you posted there so i did the central europe one...
Click to expand...
Click to collapse
Umm, according to this thread it is supposed to be this one.
The GR vs CN maybe doesn't make a difference, but maybe the P022_A022 vs. P015_A030?
Doesn't a working phone portal allow for somehow to get logs/adb etc?
(Motorola defy MB525) Well, deciding to upgrade from quarx's android 4.2 to 4.4 I went and gave the whole flashing method a try again but I made a mistake on a couple areas and I was stuck in bootloader or the motorola logo appearing on and off over and over. That was because my battery was near death or pretty much dead, so I used the mcgyver method to flash it while it was being charged which 'worked'. It did the usual 'SW update in progress' and the sbf flashed, but after the phone just went to a blank screen (as if it were off) and no longer turns on or goes anywhere. Holding the power button and/or pressing the volume buttons does nothing. I cannot access bootloader or recovery or even get the phone to display. If I connect my defy to my computer, the white led charge light comes on briefly then goes away when the cable is fully connected. Thats the only thing that makes me think my phone isn't totally broke but, I cannot flash anything with RSD Lite again, it does not detect my phone as pressing the 'start' button does nothing.
I even went and bought one of the universal battle chargers thinking my battery just needed to be charged, but even after a full charge the phone has been no different. I'm at a loss, Is my cable the issue? Is my defy just busted? I really need some advice...
Anyone have any ideas? I uploaded a video to youtube showing the problem I have a bit better.
https://www.youtube.com/watch?v=Q25klbN9kWE
The same thing happens whether I have the battery inserted or no. Its very confusing.
Try to charge the battery with another defy or with an adapter, I think that has no charge
I already charged it with a universal charger (http://www.amazon.com/gp/product/B002XY5F6A/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1) But was no different. Wouldn't this have worked? It gave me the green LED (full charge) after I left it connected for a while
If mcgyver cable is made properly, and you can't enter bl, you may have bricked your device
Sent from my MB526 using Tapatalk
thekguy said:
If mcgyver cable is made properly, and you can't enter bl, you may have bricked your device
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
I thought even if a defy is bricked you can at least get into bootloader. Can I unbrick it then?
You should be able to get into bl even then, but since you cannot, for some odd reason, there is no alternate method left
The brief white led glow seems to indicate a damaged bl, as when the internal eMMC is wiped completely
Sent from my MB526 using Tapatalk
Motorola defy is not booting
Hi can any one help me on this.
I rooted my defy and upgraded to jelly bean. It was working fine for a year and after that I found issue. So I tried to upgrade to kitkat cwm11, however it didnt work. So, did a factory reset and when i tried upgrading again, it threw an error saying, unable to mount sd card and unable to clear cache and data. After this I couldnt clear any settings or upgrade anything. Tried with different SD card and it didnt work as well. Finally, phone is not booting and when I tried to go to recovery option it doesnt work, even default motorola recovery doesnt work. My phone is not detecting in computer as well. Phone stays dead on moto logo. Please tell me how to upgrade the phone.
thekguy said:
You should be able to get into bl even then, but since you cannot, for some odd reason, there is no alternate method left
The brief white led glow seems to indicate a damaged bl, as when the internal eMMC is wiped completely
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
Alright, I guess my defy is toasted :/ Thank you for the information.
gokul_eee09 said:
Hi can any one help me on this.
I rooted my defy and upgraded to jelly bean. It was working fine for a year and after that I found issue. So I tried to upgrade to kitkat cwm11, however it didnt work. So, did a factory reset and when i tried upgrading again, it threw an error saying, unable to mount sd card and unable to clear cache and data. After this I couldnt clear any settings or upgrade anything. Tried with different SD card and it didnt work as well. Finally, phone is not booting and when I tried to go to recovery option it doesnt work, even default motorola recovery doesnt work. My phone is not detecting in computer as well. Phone stays dead on moto logo. Please tell me how to upgrade the phone.
Click to expand...
Click to collapse
Open a new thread
(Sorry double post) Wow, progress!!!
I tried the mcgyver method one last time and upon connecting the second usb cable I heard the windows chime that tells a new device has connected, but still nothing on screen. On a whim I launched RSD lite and tried flashing an SBF which did work! Halfway through the flashing process the screen came on giving me the 'SW Update in progress', though after the flash I'm back at bootloader, Did the flash work? I tried flashing another sbf but same deal, just back at bootloader. Is there a certain sbf I should use?? Please help if you can I'm getting there!
Dfp 231
Sent from my MB526 using Tapatalk