Related
MY PHONE DIED AFTER I FLUSH MY PHONE AFTER FLUSHING THIS BETA BUIL,THERE IS NO LIGHT AND I CANT CHARGE AND CANT TURN ON MY PHONE,,PLEASE HELP...
http://www.multiupload.com/1GEN8PQPMU
EDIT:wolla its working,found the solution here.just pulled out the battery 30 min and back..live on my hd2.
http://forum.xda-developers.com/showthread.php?t=596484&highlight=BRICK&page=31
I don't know how darkstone's name got into this thread, but football made it clear that you should not flash the ace build to your hd2. just re-flash the stock rom and your phone should be fine. hope this helps
The 4th line of his post said:
THIS ROM ONLY FOR COOKERS DO NOT TRY TO FLASH ON DEVICE!
I am not a dev .. let's hope they can help you. But it has been said endless number of times - first read, then read again, then several times more until every word is clear to you ... then try to flash ... on your own risk. Always.
ima take a guess and say you flashed a beta rom FOR the Desire HD on your HD2...incompatible ROM. your phone is bricked for good.
Learn to f**king read man. Im a newb and read that.
maybe not bricked for good, he shouuld be able to flash a ruu for his phone containing winmo and be good to go again, but who knows
I think he flashed a beta ROM darkstone made. It was just like any other Android build, made to launch from the sdcard. What happened exactly? You flashed it and it booted fine then just died?
yea who knows, it's nebulous. - Michael Scott
Take your battery and microsd card out and leave it for a few hours. Then plug in the battery but LEAVE THE SD CARD OUT and try booting up your phone into Windows.
Also how did you put those files on your phone since they are for the Storage Card. Did you try to copy them to your internal memory in some way?
You REALLY shouldnt try test versions unless you know what you are doing which im very sure you didnt..
Mark.
Wait... what?
OK, so you managed to get a hold of the files that I'm sharing with devs, and you somehow flash those files on to your phone (how is that even possible) ?
You must of flashed your phone using the EXE file on the first post of this thread right? If you did, then you should have not been so careless. Clearly on the first post it states that this is for developers only, this was not to be flashed.
Do not blame my files for something that you have done. Those files were not intended to be spread on this forum, however I have no problem if people do wish to post about it.
Time for you to call HTC and see if you can get a replacement...
he didnt release to the public for a reason I knew somebody was going to download it lmao
DarkStone1337 said:
Wait... what?
OK, so you managed to get a hold of the files that I'm sharing with devs, and you somehow flash those files on to your phone (how is that even possible) ?
You must of flashed your phone using the EXE file on the first post of this thread right?
Do not blame my files for something that you have done. Those files were not intended to be spread on this forum, however I have no problem if people do wish to post about it.
Time for you to call HTC and see if you can get a replacement...
Click to expand...
Click to collapse
Thats actually what i was wondering, how did he kill his phone flashing something from the SD card?
DarkStone1337 said:
Wait... what?
OK, so you managed to get a hold of the files that I'm sharing with devs, and you somehow flash those files on to your phone (how is that even possible) ?
You must of flashed your phone using the EXE file on the first post of this thread right?
Do not blame my files for something that you have done. Those files were not intended to be spread on this forum, however I have no problem if people do wish to post about it.
Time for you to call HTC and see if you can get a replacement...
Click to expand...
Click to collapse
There is a thread with a copy of your irc chat and a link to your test build. Do you want me to delete the link to the files?
Mark.
wait yea you're right. it's not a "flushable" ROM..i just downloaded the file and it's just another Android build that you put on the SD card. Not sure what the OP "flushed" but yeah, taking the SD card out and restarting the phone should do the trick. Am I missing something? Can you actually brick your phone booting android from Haret?
DarkStone1337 said:
Wait... what?
OK, so you managed to get a hold of the files that I'm sharing with devs, and you somehow flash those files on to your phone (how is that even possible) ?
You must of flashed your phone using the EXE file on the first post of this thread right? If you did, then you should have not been so careless. Clearly on the first post it states that this is for developers only, this was not to be flashed.
Do not blame my files for something that you have done. Those files were not intended to be spread on this forum, however I have no problem if people do wish to post about it.
Time for you to call HTC and see if you can get a replacement...
Click to expand...
Click to collapse
I was watching the conversation and when you posted it on linux-chat I knew somebody was going to do it....i swear lmao
mskip said:
There is a thread with a copy of your irc chat and a link to your test build. Do you want me to delete the link to the files?
Mark.
Click to expand...
Click to collapse
Nope it's fine
I don't mind links being posted, but people need to be careful with them.
There was a reason that I didn't post that link, the build was incomplete and still had issues.
Thanks though
malikadnanm said:
wait yea you're right. it's not a "flushable" ROM..i just downloaded the file and it's just another Android build that you put on the SD card. Not sure what the OP "flushed" but yeah, taking the SD card out and restarting the phone should do the trick. Am I missing something? Can you actually brick your phone booting android from Haret?
Click to expand...
Click to collapse
There is always a slight chance of messing Windows Mobile up but as long as you have HardSPL installed you can easily flash a new rom and get everything working again so nothing much to worry about.
Mark.
mskip said:
There is a thread with a copy of your irc chat and a link to your test build. Do you want me to delete the link to the files?
Mark.
Click to expand...
Click to collapse
It was I who put the link, without malice, thought it could be shared, i wrote clearly that it was a BETA BUILD for devs try.
If you want, i delete de post.
i just put the beta rom on my Sd card and pressed haret,then it stuck on bootlader,i taked off battery and on nothing happent.there is no light or nothing,i try to charge but nothing happens,no sync(sory for my engl.)
he said ace beta not just an android sd sh**t it said for cookers only
Greetings people ^ First of all Hi,im new to XDA
Awesome forum btw.
My question is : I have a SE X10i branded in Spain, Vodafone ES ...on R2BA024 (i think) and i wanna unbrand it to SE X10i UK Generic R2BA020 (That way i can get the 2.1 update faster,cause vodafone will take alot i think to get it rolling around)
Will it all work perfectly? I mean,will i concur with any problems?
Thanks in advance ^^
PS : My SIM Lock is off so i think ill be able to use any SIM i got
PS2: Sorry if this has been asked already ,i just couldnt find any posts regarding this.
I'm unlocked but branded Vodafone UK, build R2BA024 and would like some help in debranding too - so I can get the 2.1 faster.
I'm not sure how to debrand and what method will work
I have however managed to get root and have superuser permission (so i'm not a complete blonde)
Any help would be greatly appreciated
tia x
P.S. Hello and welcome xtrmshadow , I hope you dont mind me piggybacking your post
Please search the forums first before opening a new thread.
Go to one of the debrand threads where they have guides.
Sent from my X10i using XDA App
Ty ^^ And no mate i dont mind =) happy my thread will help more than just me out =)
xtrmshadow said:
Ty ^^ And no mate i dont mind =) happy my thread will help more than just me out =)
Click to expand...
Click to collapse
But there are already threads out there to help you out, before you posted yours- just a friendly reminder thats all, the more threads people open the more clogged up the forum and the harder to search
Anyway here you are
http://www.esato.com/board/viewtopic.php?topic=195467
Sent from my X10i using XDA App
jayman1986 said:
But there are already threads out there to help you out, before you posted yours- just a friendly reminder thats all, the more threads people open the more clogged up the forum and the harder to search
Anyway here you are
http://www.esato.com/board/viewtopic.php?topic=195467
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Thanks you for your time and effort Jayman
I had already searched the forum and came across the same method in that link you posted but I'm unsure if it works
this method doesnt work anymore need to debrand my other x10
Click to expand...
Click to collapse
Didn't work with mine either as all the Orange browser bookmards are still there.
Click to expand...
Click to collapse
I've tried this so many times now but it's just not working.
Click to expand...
Click to collapse
im having exactly the same problem, ive debranded my phone before also but i cant get it to work right now because the file name has changed and SEUS keeps overwriting the firmware im trying to put in my X10a
Click to expand...
Click to collapse
Try this I've copied this from Synlar's post.
****
There seems to be a lot of questions regarding the steps laid out in the official thread, so here I'll try doing a STEP BY STEP guide for those who are confused with the steps.
I borrowed some stuff from the original guide, so thanks Bin4ry, jerpelea and biktor_gj for everything!
NOTE: Before you begin, you should know that this process will wipe everything off your phone. So backup your contacts, and text messages and everything on your phone! Download a free backup program from the market to make backups onto your SD card, and after you're done everything, download that program again and restore everything from SD card. Your SD card remains fine.
1) Install SEUS (Sony Ericsson Update Service).
You can get it from here: http://www.sonyericsson.com/cws/download/1/110/61/1275980198/Update_Service_Setup-2.10.6.21.exe
2) Run SEUS, follow the prompts. You don't need to update the phone through it, but get the phone ready for updating. This process should install the drivers necessary for the rooting process.
Note: I suggest you keep your USB cable attached to that USB port. Remember which USB port of your computer it's attached to, as changing USB ports can lead to a bit of confusion for the next 2 steps!
3) To check if #2 was successful, click on Start, click Run, and type: regedit
In the Registry Editor that pops up, click on Computer, press CTRL+F, and search for this: USB\Vid_0fce&Pid_adde\
After it's finished finding, on the right side you'll see DeviceInstance, then it says REG_SZ, then it says something like USB\Vid_0fce&Pid_adde\5&270d2a78&0&3
You'll need that last bit (in this example: 5&270d2a78&0&3 Yours would probably be different). This is your DeviceID (you'll need it soon!)
Note: You may have multiple of these if you plugged the USB cord into many USB ports on your computer. Each USB port will give a different DeviceID, so if you have more than one DeviceID, you'll have to choose one, and if it doesn't work (you'll find out when you reach #5!) you will have to choose another one.
Alternatively, download the file in the next step and extract it, go to the folder called 1st, and run the DeviceID.jar file. It should give your DeviceID
4) Download this:
http://filevo.com/1nlq8wryo11u.html
or from here: http://rapidshare.com/files/404363083/i_R1FA16_ft.rar.html
Extract it.
In the step1 folder, you'll see a file called DeviceID.txt
Open it up, delete whatever's there, and put YOUR DeviceID (that you found from the previous step).
Save the file and close notepad.
Note: Make sure there are no extra spaces or lines after/before the DeviceID. The ONLY thing that should be in the file is your DeviceID, NO SPACES/LINES (for example, only this: 5&270d2a78&0&3 [yours will probably be different])
5) Take out the USB cable from your phone (leave it plugged into your computer)
Turn your phone OFF
Open up step1.cmd (it's not inside the step1 folder, but outside it), but DON'T PRESS ANYTHING
Now we have to put the phone into flash mode. This is how you do it:
Hold the Back button on your phone, and while holding the back button, insert the USB cable into the phone.
A green light should come on the phone (like when it's charging or a missed call)
Quickly "Press any key to continue..." in the open step1.cmd window.
Let it finish what it's doing. It will say "Press any key to continue..." after it's finished. Until then, DON'T touch anything!
If you get problems in this step, refer to this post:
http://forum.xda-developers.com/showpost.php?p=6970868&postcount=3
Here's a helpful video for common java issue: http://forum.xda-developers.com/showthread.php?t=713457
After completion, this will give you a Generic X10i R1FA016 firmware (check it by pressing the left button, go to settings>about phone and at the very bottom under build number)
Keep your phone plugged into the USB.
6) Download this:
http://filevo.com/yzmh8wlyrgtz.html
or from here: http://rapidshare.com/files/404359845/ROOT_F2v2.rar.html
Extract it.
DELETE step4 folder, step5 folder, step4.cmd and step5.cmd
Now we're going to put the phone into Debugging mode:
Turn your phone on if it's not already on.
Press the left button, go to Settings>Applications>Development and check on USB debugging, press OK in the popup. Plug the USB into the phone (in case you disconnected it). You should see an exclamation mark at the very top left of the screen of the phone.
Do NOT have the SD card mounted to your computer!
Note: This next step can take a while!
Open step2.cmd, don't press anything!
On the phone, a list of buttons will come up eventually. Press the 6th option (something about update from SDcard). ONLY PRESS IT ONCE!
Leave your phone alone. Go to the washroom or eat a snack.
You'll see the progress on the phone screen, as it installs the package. Leave everything alone.
After completion, this will give you a Generic X10i R2BA023 firmware.
If you get problems, try this post: http://forum.xda-developers.com/showpost.php?p=7003121&postcount=1122
7) The phone should be on, USB plugged in, and already in USB debugging mode.
Open step3.cmd, and 'Press any key to continue'
Let it finish what it's doing, it will say 'Press any key to continue' at the end after it's finished.
After completion, this will give you ROOT! And it also installs some programs for you.
_____________________________________________________________________
Additional steps for X10a:
Download this:
http://filevo.com/okknxk23pbnr.html
or from here: http://hotfile.com/dl/52357616/84b4027/ROOT_F2v2_X10a.rar.html
Extract it.
Inside the step4 folder, there is a DeviceID.txt file. Remember you've seen this before? Copy the same one from step1 folder that you did in #4, and put it into the step4 folder.
Follow #5 (except with step4.cmd)
Next, turn the phone on (if it doesn't turn on, unplug the USB from the phone, and try turning it on again, then plug the USB back in). Put it in USB debugging mode if it's not (if you forgot how to, look back in #6)
Open step5.cmd
After it's done, press the left button on the the phone, go to Settings>About phone and under Model number it should say X10a
_____________________________________________________________________
Market Fix:
If you have an X10i, follow this: http://forum.xda-developers.com/showthread.php?t=719486
Otherwise if you have an X10a, use this file instead, but follow the same instructions as in the link above: http://rapidshare.com/files/405188255/Market-Fix-X10a.rar
_____________________________________________________________________
To delete preinstalled programs you don't want, such as Moxier:
Put phone in debugging mode if it's not already.
I recommend you unplug USB from phone so you don't end up running some file and messing your phone
Open up the step3 folder. Right-click on cleanup.cmd, and click on edit.
Whatever is there in that list of "@adb shell rm /blah/blah/blah" will get wiped off your phone. So change the list as you want. If you're unsure, REMOVE IT FROM THE LIST!
After you're done making your list of apps to remove, save the file, plug USB into phone, and run the file.
Here is a thread that says what some of the applications are, and additional ones you can add to the list, to remove from the phone: http://forum.xda-developers.com/showthread.php?t=714021
Alternatively, you can install Titanium Backup from the market (it's free!) and use that to uninstall some applications. Also, it's really great for making a backup of your stuff (you can backup more things now since you have access to more things since you now have root!)
_____________________________________________________________________
If you are experiencing difficulties, try reading through this thread, since it may already be answered: http://forum.xda-developers.com/showthread.php?t=711969
Check out this post if you are having troubles; hopefully it can clear up some common problems people may be having: http://forum.xda-developers.com/showpost.php?p=7099515&postcount=1927
I hope this step-by-step guide helps!
Sent from my X10i using XDA App
If you still have problems, try reading a recent thread by Seansmit17.
Thread titled "that was easy"
he seems to have another solution to debranding.
Sent from my X10i using XDA App
xtrmshadow said:
Will it all work perfectly? I mean,will i concur with any problems?
Click to expand...
Click to collapse
Run steps 1-5 HERE, then run SEUS which will update you to R2BA026.
Ah o.o i finally did from here http://forum.xda-developers.com/showthread.php?t=717949&page=22 and worked perfectly for me ,im at last step7 and so far its working great...after this ima update to 026 and done ^^
Thanks for the help people =)
My Phone is working great ^^
And Damn fast now
Ty Again =) Now to wait for update 2.1 :3
xtrmshadow said:
Ah o.o i finally did from here http://forum.xda-developers.com/showthread.php?t=717949&page=22 and worked perfectly for me ,im at last step7 and so far its working great...after this ima update to 026 and done ^^
Click to expand...
Click to collapse
If you'd have stopped at step 5 and run seus you would flash straight to 026, instead of having to flash to 023 and then 026.
I've tried this method
http://www.esato.com/board/viewtopic.php?topic=195467
when I get to step 12 SE's PC Companion just re-downloads the Vodafone files again :'(
still stuck on uk 024 :'(
Same thing happens on the SEUS swap method, it doesn't attempt to download the files as they are already there so I don't get the opportunity to swap :'(
@debs ,that method doesnt work anymore mate,use the one from here : http://forum.xda-developers.com/show...717949&page=22 .
That one works,i just tried it myself.
Regards ^^
PS: Just be careful on the steps,read em carefully before doing anything,you can brick your phone doing that.
Thank you sooooo much XperiaX10iUser and xtrmshadow. Chuffed to bits now I have finally got 026 on. I did it the way you both suggested but only up to part 5, then let SEUS update me to 026.
I'm one happy bunny now
xtyx
I also read something about replacing just one file? I can't find the post anymore and don't remember the filename. I unbranded my phone months ago. But my wife has the same phone from Vodafone, but branded. If someone can tell me the name of the file and whether I can copy mine file to her phone to unbrand it?
olafski72 said:
I also read something about replacing just one file? I can't find the post anymore and don't remember the filename. I unbranded my phone months ago. But my wife has the same phone from Vodafone, but branded. If someone can tell me the name of the file and whether I can copy mine file to her phone to unbrand it?
Click to expand...
Click to collapse
No you can't exactly copy it.
Go to the debrand thread posted on first page and read through carefully then you'll see that the files are copied to a certain folder on your pc. Since you've done it before I'm sure it will come back to you if you simply reread the obstructions.
Edit:Btw the links posted by XperiaX10User and xtrmshadow are actually same post with I copy and pasted on first page. Just so you don't get confused.
Sent from my X10i using XDA App
I found it, I mean the build.prop. What if I replace her build.prop with mine? Would that work?
I know about the SEUS and then during the process replace the files etc. But that is not what I mean ;-)
Thanx again!
olafski72 said:
I found it, I mean the build.prop. What if I replace her build.prop with mine? Would that work?
I know about the SEUS and then during the process replace the files etc. But that is not what I mean ;-)
Thanx again!
Click to expand...
Click to collapse
Sadly I'm not experienced enough on this subject to answer that question, maybe pm jerplea or bin4ry?
Sent from my X10i using XDA App
Hey guys - I'm new to this forum, but I figure if anyone can help me, someone here can.
So, my bro got ahold of my phone and rooted it and installed Axura 2.2.5.9.
Since there is a newer version, I would like to throw it on and work out a few glitches and get whatever tweaks were put there.
So, how do I go about updating this thing? If anyone has the time or the patience, I would love to hear this in layman's terms.
Like:
Step 1 - download 'this file'
Step 2 - Plug phone in and drag/drop to 'folder x' on 'internal/external sd'
Etc. I came from an iPhone and all the lingo is different - like jailbreaking vs rooting. And saying "flash" instead of "load" or ROM instead of OS.
I would just like to update, but I'd liek to not be confused by all the different slang.
Thanks, anyone, for putting your 2 cents in to help a brother out.
this thread:
http://forum.xda-developers.com/showthread.php?t=849028
will answer all your questions
After you read the noob guide, feel free to PM me if you need clarification... I would also be curious to know if you think it could be improved. I wrote it trying to cater to the noob.
Just install download the rom you want on the sd (internal memory, dont save it in any folder) then boot into recovery (you should be able to do so by simply holding the power button for a second) now choose install zip from sd or sth like that and pick the rom file. The end.
Sent from my JPJPM V2 powered SGH-T959 using XDA App
full instructions easily available on the d4a site
click the link in my sig go down to vibrant section > roms> read the op
Its exactly like flashing any other rom, only difference being that you have an axuraXXXX.zip instead of ANYOTHERROM.zip
Cheers.
Just remember to backup your apps, since the new rom will wipe your phone.
To be safe, you may want to make a nandroid backup in CWR... always nice to have something to fall back on.
The guide has more detail like these steps, but yes, everyone is right in saying just download it and flash it. I think it's important to backup everything.
The Noob Guide is really well written. My problem now is I cant find the file to download!
A Rom you mean? You can find those in the development forum along with other tools you may need to run/flash it.
Here's a link just in case you don't know where that is
http://forum.xda-developers.com/forumdisplay.php?f=711
Yes, the ROM. I went to the daily bible thread and tried to click "Download" on the Axura subsection. It gave me an "Error 404 - file not found".
Just open one of the threads in the form link I just gave you and look for the ROM you wanted, then check the first post there for the download link.
I did that. That's when I get the Error 404.
http://forum.xda-developers.com/showthread.php?t=949372
They must have pulled that rom of the server or the host did that. Just go for another one, plenty of options out there and quite frankly Axura isn't exactly the most sought after roms around here.
Axura is truly in need of a 2.2.1 update, but seeing as though Master is happy with his Nexus, it will never be getting one. And quite frankly, Eugene's gingerclone roms, trigger, or any of the i9000 ports run much smoother to me.
Ding forget he has also gotten a thunderbolt, I thought about picking up dev on axura but I have no where near enough time to mess with it, but I agree axura is in dire need of an update to 2.2.1
This post Trigger'd by my Vibrant
THANKS GUYS
I just got Trigger and so far so good.
My only issue is that I couldnt figure out how to restore my apps in Ti. Looked like there were 0 files backed up. Oh well. One at a time.
Hi, i have been looking through some of the rooting, flash threads on here and there is a bit too much information,lol.
Can anyone detail the basic steps, software required to roll my X10 back to the 1.6 OS?
I am still having connectivity issues when trying to use the handset in the car.
The vehicle manufactures website shows that the Xperia X10i is compatible with their factory fitted handsfree systems, but only on OS 1.6.
1. Download this and extract in any folder of your computer:megaupload.com/?d=HCWX4KO3 (The credits of this goes for its creators)
2. Open the folder that its named 1_firmware and in the fileDeviceID.txt copy yours, save and close. (This is the same as the one used on the flashtools of Bin4ry)
This is how you can get your DeviceID on Windows: (Again thanks tojimbo77)
2.1: Connect your phone to the computer on the USB port you are going to use to flash it.
2.2: Press start (or windows icon) and in the run box type regedit
2.3: Click edit>find, and type in Vid_0fce&Pid_adde. You should find "DeviceInstance". If that fails, make sure Match whole stringis un-ticked, and click find next or press f3, if that fails, tryUSB\VID_0FCE&PID_ADDE. Copy the last section of that, it should look something like "5&2888d0ff&0&1".
Note: It changes with every diffrent USB port you use....3. Download your Firmware, extract it and copy all the files on it to the 1_firmware folder. You don't have to erase anything from this folder, unless you got the message to replace a file.
4. Now run the RootX10a_v2.cmd and select step 1 and follow the instructions. If done correctly you will see a window that starts to write and write and write a lot of things. This process will take around 5 minutes, so be patient. (It is like if you were flashing your phone)
5. Turn your phone on and wait until you get the configuration screen.
6. Now connect the phone to the PC and run PC Companion or SEUS. If it shows that there is a new software for your phone, follow the instructions and update if you want.
7. Enjoy your phone on Android OS 1.6 or 2.1 with your operator
Thank you on anticipation to any help offered.
I have had a look here, but am not 100% if this is all that i need to do?
Sorry, not able to post the link, being a new user.
The one part that is not clear to me is where they say, "Open the folder that its named 1_firmware and in the fileDeviceID.txt copy yours, save and close"
What is it that im supposed to copy?
No.. no...
You need the flashtool and the 1.6 files..
I cant seem to find the 1.6 files...
Why do you need 1.6?
SE seem to have done something with the update 2.1 where the phones Bluetooth will connect to my vehicle, but only for about 40 seconds, then removes its self and then re attaches, then removes its self again and this goes on for the duration the handset is in the car with me.
The handset i have just now was a replacement for my original and came with the 2.1 OS already updated.
The original 1.6 OS that was on the phone connected to my vehicle and gave me phonebook access.
I have neither now hence why i wish to roll back to the software that is compatible with my vehicles system. 1.6 buildR1FA016 Kernel 2.6
Get your phone rooted, load Xrecovery.
and flash Wolfbreaks CM rom.
And watch the magic.
OmegaRED^ said:
Get your phone rooted, load Xrecovery.
and flash Wolfbreaks CM rom.
And watch the magic.
Click to expand...
Click to collapse
Thanks for the above, but can you break this into more simple instructions, links etc as this is way above me. I'm not totally useless, but i have never done anything like this, so it is all double dutch to me at this point in time,lol.
Download the flashtool from androxyde's thread then follow the instructions to flash the latest FW, then reboot your phone plug it in and press root on the flashtool and then reboot and install XRecovery and use it to install a custom ROM by following the directions in a ROM thread.
Just start by reading the Flashtool thread.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
CMoney87 said:
Download the flashtool from androxyde's thread then follow the instructions to flash the latest FW, then reboot your phone plug it in and press root on the flashtool and then reboot and install XRecovery and use it to install a custom ROM by following the directions in a ROM thread.
Just start by reading the Flashtool thread.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Click to expand...
Click to collapse
Had a read at the flash tool thread and even more confused now, too much information and no understanding of what it all means.
I am looking for someone who can supply links to what i actually need to roll the phone back.
What software do i require.
Do i have to root the phone and if so, how do you do this?
I did say in the thread title an "Idiots Guide". Simple and straightforward instructions that a first timer can comprehend, similar to the text in my first post, bullet points?
Thanks.
Bonzo67 said:
I am looking for someone who can supply links to what i actually need to roll the phone back.
What software do i require.
Do i have to root the phone and if so, how do you do this?
I did say in the thread title an "Idiots Guide". Simple and straightforward instructions that a first timer can comprehend, similar to the text in my first post, bullet points?
Thanks.
Click to expand...
Click to collapse
Dude.. all the threads have the answers.
Read abit it won't kill you.
OmegaRED^ said:
Dude.. all the threads have the answers.
Read abit it won't kill you.
Click to expand...
Click to collapse
I did and it's version this and version that. So which version is it that i actually need without screwing up my phone?
Suppose i'm more looking for something along the lines of what you would get if you downloaded a torrent file, where everything is in the one folder, inc the instructions.
Anyway, hopefully problem is sorted, as i am ditching SE after 10 years of using their handsets and going to Samsung which is compatible with my vehicles factory fitted system.
Bonzo67 said:
I did and it's version this and version that. So which version is it that i actually need without screwing up my phone?
Suppose i'm more looking for something along the lines of what you would get if you downloaded a torrent file, where everything is in the one folder, inc the instructions.
Anyway, hopefully problem is sorted, as i am ditching SE after 10 years of using their handsets and going to Samsung which is compatible with my vehicles factory fitted system.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1060703
Hello all, I found a method to Root and get a custom recovery on our cricket variant, no donations required! You need to find a copy of sugar qct with a username and password, I don't remember exactly where I found it but it shouldn't be too difficult to find. Then you need to let it update to the latest build, which includes the programmer for our phone. If you don't see 6055u in the list it's not up to date. From there, Hook up your phone (may need to manually put it in download mode. Press upgrade and then navigate to the install directory, look in /bin and find where it downloads all the mbm files. Replace the one that starts with an r with the TWRP recovery for 6055. You may have to overwrite it multiple times during the process. If you did it correctly you will be able to boot into TWRP, if not try again. If you don't close sugar I believe it won't overwrite the firmware files, but I haven't messed with it much. I will try to write a tool to make it easier when I have the time but I'm pretty busy. Feel free to pm me with any questions and I will help the best I can.
To get root just install supersu
F
dbgr said:
Hello all, I found a method to Root and get a custom recovery on our cricket variant, no donations required! You need to find a copy of sugar qct with a username and password, I don't remember exactly where I found it but it shouldn't be too difficult to find. Then you need to let it update to the latest build, which includes the programmer for our phone. If you don't see 6055u in the list it's not up to date. From there, Hook up your phone (may need to manually put it in download mode. Press upgrade and then navigate to the install directory, look in /bin and find where it downloads all the mbm files. Replace the one that starts with an r with the TWRP recovery for 6055. You may have to overwrite it multiple times during the process. If you did it correctly you will be able to boot into TWRP, if not try again. If you don't close sugar I believe it won't overwrite the firmware files, but I haven't messed with it much. I will try to write a tool to make it easier when I have the time but I'm pretty busy. Feel free to pm me with any questions and I will help the best I can.
To get root just install supersu
Click to expand...
Click to collapse
Did a Google search for "sugar qct" and I see a couple of million hits for "The Sugar Act"... :laugh:
Tried Root Genius, and it, of course doesn't work...
If you happen to find a link for the app or method you stated, I would be eternally grateful... My lovely wife and I upgraded our phones to the Cricket 6055U, and, since, while not an Android developer, per se, can find my way around the device without being scared off...
So, with due respect, I'd ask if you have the app or name correct?
Thanks, friend, and best respect.
--- edit ---
Oops... was premature... found it and am giving it a try... I'll post my results after I give it a shot...
http://forum.gsmhosting.com/vbb/f606/vf-895n-smart-prime-6-stock-rom-flash-tool-2033867/
This should help with setting up sugar. The only difference here is to update it and you also need a username and password that I don't have on me at the moment. It will be a few hours until I get home but I will update asap.
Edit: nevermind lol, good luck friend. You may need a decent battery percentage as well
pauljulian said:
F
Did a Google search for "sugar qct" and I see a couple of million hits for "The Sugar Act"... :laugh:
Tried Root Genius, and it, of course doesn't work...
If you happen to find a link for the app or method you stated, I would be eternally grateful... My lovely wife and I upgraded our phones to the Cricket 6055U, and, since, while not an Android developer, per se, can find my way around the device without being scared off...
So, with due respect, I'd ask if you have the app or name correct?
Thanks, friend, and best respect.
--- edit ---
Oops... was premature... found it and am giving it a try... I'll post my results after I give it a shot...
Click to expand...
Click to collapse
----- edit 2 -----
OK... apparently I'm an idiot... Running Windows 10 Pro, and the installer says it's going to install to an appropriate folder on C:\... yet, trying to find it, it really is weird.... I'm going to try on a VMWare Win 7 virtual PC, and see if I'm able to find it there, and move it to my actual C: drive...
If it works, I'll be grateful for your contribution and praise you to the highest heaven! :laugh:
pauljulian said:
----- edit 2 -----
OK... apparently I'm an idiot... Running Windows 10 Pro, and the installer says it's going to install to an appropriate folder on C:\... yet, trying to find it, it really is weird.... I'm going to try on a VMWare Win 7 virtual PC, and see if I'm able to find it there, and move it to my actual C: drive...
If it works, I'll be grateful for your contribution and praise you to the highest heaven! :laugh:
Click to expand...
Click to collapse
Can't seem to get the beast to work...
If you would be so kind, would there be any way you'd be able to write up a concise step-by-step thing, if you've made it work... I've got the .chm file open on my desktop, and have spent a few hours trying to make it work to no avail.
Again, if it worked for you, your process would be welcome.
Cricket Alcatel Idol 4, 6055U
---------- Post added at 03:36 PM ---------- Previous post was at 02:40 PM ----------
pauljulian said:
Can't seem to get the beast to work...
If you would be so kind, would there be any way you'd be able to write up a concise step-by-step thing, if you've made it work... I've got the .chm file open on my desktop, and have spent a few hours trying to make it work to no avail.
Again, if it worked for you, your process would be welcome.
Cricket Alcatel Idol 4, 6055U
Click to expand...
Click to collapse
My point is that the site recommended seems to insist on Lollipop on the small beast... and there doesn't seem to be a recommendation for the .bin files, and, when installing on Win 10, it seems to install the Sugar app into some directory on my C: drive that is really not that accessible... Did it using a VMWare Win 7 32-bit virtual, and was able to access the directory, copy and paste to my regular C: drive (old Windows geek since Win 3.11... and DOS 3), and it seemed to run... (of course, running as Administrator), but it really doesn't seem to work for me... Again, I freely admit that I'm likely not doing something right, but even after some research and the included .chm file, I seem to be missing something.
Again, and begging your indulgence for seeming like a noob or a rube, but if I'm not making it happen, I rather think that the tips would be lost on someone for whom this is their first Android device...
Kinda frustrating, as, even though I've been a tech-support guy and database developer for more than 30 years, this thing has me stymied...
I found it fascinating for the *#*# command, earlier, from another noble soul, and, obviously, I also found that the device as configured says, basically... "Don't give a damn... you can turn this sucker on, but as soon as you exit this menu, I'm gonna turn it off again."
Just a little frustrating, and it seems that most of the tips and tricks elsewhere seem to be thinking that new owners of the 6055U are running Lollipop.... aaarrrgggghhh....
If it needs Lollipop to work, and if there's a relatively painless way to downgrade, and then upgrade from a ROM, I'm good with that... the Idol 3 seemed to require that, and it worked well for me, with just an evening's work. This one? Cricket seems to have had a warped sense of humor about it... I seriously dig the device, and, since my Idol 3 broke, and my lovely wife's LG G-Stylo (which was a pain in the ass, and next-to-impossible to root, and then be just perpetually stuck at the logo screen with an unfixable boot loop, if one screwed it up, and just required sending the beast back to LG, as long as one took out Cricket's warranty plan... <sigh>), we took the plunge on this one...
Not much for which I require root, but, since I spent good money on some legit apps (and lucked into a few ... ahem... not legit apps that worked for me), these things require root... I know there's a way to do it, and the Sugar app seems promising, but, mildly autistic guy that I am (and 60 years old, with a memory that doesn't work as it used to), a slimmed-down step-by-step doc would be helpful... should some noble soul put such together...
Apparently, the root method has worked for at least one member here.... But this weird old Jewish hippie doesn't see the mental diagram....
Any help would be welcome, my friends and mishpocheh... ("dear family" --- been here enough years, albeit a relatively quiet member, that y'all might as well be family... )
Hey everyone, sorry about the confusion. I installed on Windows 10 pro with no issues. As far as the page I linked you can disregard everything but the app itself. The update that downloads is marshmallow, and I've had no issues overwriting the latest version. I may have gotten sugar from a different location though, as soon as I get a chance I will do a better write up with everything. A helpful way to find the install directory would be right click on the shortcut from the start menu and click find Target / open file location. If it brings you to the folder with the shortcuts do it again and you will have the install directory. The app should be in (install dir)/tool and the downloaded updates go in (install dir)/bin under a folder that only shows up once you start the process within sugar. I will try to compile the information into a more user friendly format tonight but I can't make any promises on that.
Also just to clarify, I didn't use any chm file
I'm wondering if you could upload your version you have on your pc. I just spent the last month in jail here in Orlando fighting a case and the only proof I've got is on my phone on a phone that I deleted my videos on. I really need the videos back too get a not guilty if I gotta pay for it it's cool but I'm out on bond and all the recover videos apps require root
I got this to work last night. Typed up some instructions but didn't get them posted. They're on my PC at home and I'm at work.
Basically use the copy of sugar in the download package in this thread and then start it and let it update https://forum.xda-developers.com/android/development/recovery-vodafone-prime-tab-7-t3548560
Those are the basic instructions too except we don't need to swap out bout and use the TWRP from deckersu thread.
Once flashed it'll automatically reboot. I found you had to make sure you caught this and booted into TWRP right away don't let the phone boot. Then transfer SuperSU in TWRP and flash.
---------- Post added at 11:29 AM ---------- Previous post was at 11:23 AM ----------
Asadullah said:
I'm wondering if you could upload your version you have on your pc. I just spent the last month in jail here in Orlando fighting a case and the only proof I've got is on my phone on a phone that I deleted my videos on. I really need the videos back too get a not guilty if I gotta pay for it it's cool but I'm out on bond an ind all the recover videos apps require root
Click to expand...
Click to collapse
FYI this root method wipes your phone so I don't know if this will help your situation or not.
In sugar there is an option to not wipe, it's under session settings or something to that effect
dbgr said:
In sugar there is an option to not wipe, it's under session settings or something to that effect
Click to expand...
Click to collapse
Wish I had noticed that!! Oh well, stoked to have root and it's good to start fresh. Got Xposed installed today and finally got that annoying charging light turned off. Working on getting wifi tetherng working. Then if I can figure out how to get the dialer to be friends with Google voice this phone will have all its annoyance fixed
Thanks so much for figuring this out and sharing!!
dbgr said:
In sugar there is an option to not wipe, it's under session settings or something to that effect
Click to expand...
Click to collapse
Appreciate the help
woodi5359 said:
https://forum.xda-developers.com/android/development/recovery-vodafone-prime-tab-7-t3548560.
Click to expand...
Click to collapse
Thank you for finding this thread, it is the same one I found but I couldn't remember where it was the other day when I started this thread. Hopefully this will help the people who have been having issues, although I will admit a more painless method would be preferable. I'm currently working on modifying a dirtycow exploit to simply flash the recovery and reboot into twrp, if I get it to work I will zip it all up and post it here.
woodi5359 said:
Wish I had noticed that!! Oh well, stoked to have root and it's good to start fresh. Got Xposed installed today and finally got that annoying charging light turned off. Working on getting wifi tetherng working. Then if I can figure out how to get the dialer to be friends with Google voice this phone will have all its annoyance fixed
Thanks so much for figuring this out and sharing!!
Click to expand...
Click to collapse
I got wifi tethering working I did a lot of things but I believe that did it was adding net.tethering.noprovisioning=true to my build.prop then I went into system/app and changed serviceentitlement.apk into serviceentitlement.oat using es file Explorer
Asadullah said:
I got wifi tethering working I did a lot of things but I believe that did it was adding net.tethering.noprovisioning=true to my build.prop then I went into system/app and changed serviceentitlement.apk into serviceentitlement.oat using es file Explorer
Click to expand...
Click to collapse
I just tested this and it indeed does work. Great find friend!
Asadullah said:
I got wifi tethering working I did a lot of things but I believe that did it was adding net.tethering.noprovisioning=true to my build.prop then I went into system/app and changed serviceentitlement.apk into serviceentitlement.oat using es file Explorer
Click to expand...
Click to collapse
Thanks for figuring this out!!! I'd been messing with it for a few days. The renaming the apk to .oat was the piece I was missing. That and a reboot got it working!!
dbgr said:
Hello all, I found a method to Root and get a custom recovery on our cricket variant, no donations required! You need to find a copy of sugar qct with a username and password, I don't remember exactly where I found it but it shouldn't be too difficult to find. Then you need to let it update to the latest build, which includes the programmer for our phone. If you don't see 6055u in the list it's not up to date. From there, Hook up your phone (may need to manually put it in download mode. Press upgrade and then navigate to the install directory, look in /bin and find where it downloads all the mbm files. Replace the one that starts with an r with the TWRP recovery for 6055. You may have to overwrite it multiple times during the process. If you did it correctly you will be able to boot into TWRP, if not try again. If you don't close sugar I believe it won't overwrite the firmware files, but I haven't messed with it much. I will try to write a tool to make it easier when I have the time but I'm pretty busy. Feel free to pm me with any questions and I will help the best I can.
To get root just install supersu
Click to expand...
Click to collapse
so im getting ready to purchase this device so there is root and twrp for it or no
Dude, did you read the thread at all? I don't mind helping but you gotta do your part. Yes there is TWRP and Root
dbgr said:
Hello all, I found a method to Root and get a custom recovery on our cricket variant, no donations required! You need to find a copy of sugar qct with a username and password, I don't remember exactly where I found it but it shouldn't be too difficult to find. Then you need to let it update to the latest build, which includes the programmer for our phone. If you don't see 6055u in the list it's not up to date. From there, Hook up your phone (may need to manually put it in download mode. Press upgrade and then navigate to the install directory, look in /bin and find where it downloads all the mbm files. Replace the one that starts with an r with the TWRP recovery for 6055. You may have to overwrite it multiple times during the process. If you did it correctly you will be able to boot into TWRP, if not try again. If you don't close sugar I believe it won't overwrite the firmware files, but I haven't messed with it much. I will try to write a tool to make it easier when I have the time but I'm pretty busy. Feel free to pm me with any questions and I will help the best I can.
To get root just install supersu
Click to expand...
Click to collapse
do you hold volume down when it reboots
link22534 said:
do you hold volume down when it reboots
Click to expand...
Click to collapse
It's volume up and power