[Q] Got me some boot loops after using a specific font with Type Fresh. - myTouch 4G Q&A, Help & Troubleshooting

Alright, so last night I was fooling around with "Type Fresh," which you guys have probably heard of. It was released here... It's a font changer...
Anyway, things were going good until I tried a font named, "Joystix," which replaced quite a few of my fonts. That caused my phone to go into a crazy bootloop.
So, at this point, I do not have Clockwork Recovery. I actually have the Stock Recovery. For some strange reason, my stock recovery just takes me to a screen with a red triangle, and factory reset just shows this hard drive and a loading bar that never goes anywhere before rebooting my phone into a boot loop.
I've checked to see if ADB will work in my stock recovery, and it does, except for the fact that my phone is, "offline," which is probably not good.
Is there anyway I can get my phone to work again? I remember when I was getting bootloops and I somehow got the phone to reinstall all the correct stuff after going into the stock Volume Down+Power thing a few days ago. I don't know or remember how. Like, it was going into the whole process of giving me the choices and said, "Do you want to update?" I said yes and voila, everything is back to normal. Sadly, this isn't the case atm. :|
halp

wauterboi said:
I've checked to see if ADB will work in my stock recovery, and it does, except for the fact that my phone is, "offline," which is probably not good.
Is there anyway I can get my phone to work again? I remember when I was getting bootloops and I somehow got the phone to reinstall all the correct stuff after going into the stock Volume Down+Power thing a few days ago. I don't know or remember how. Like, it was going into the whole process of giving me the choices and said, "Do you want to update?" I said yes and voila, everything is back to normal. Sadly, this isn't the case atm. :|
halp
Click to expand...
Click to collapse
Well I've never personally used type fresh to change fonts, I've done it in other ways. Just a thought for ya, but I would recommend that if you can get adb to recognize your device (cmd: adb devices) try booting into hboot(volume down + power), and see if it recognizes it regularly that way, from there I recommend trying a program called Droid. It's a windows program that I used when I messed up re-rooting my replacement mt4g (tip: Don't try rooting when having been awake for 26 hours for no apparent reason ). It has a feature called Debug Console which fixed a bootloop, and constant force close that I somehow managed. I also suggest pulling your sdcard, getting a usb scard reader, and installing the stock recovery zip (Pdimg or something like that, I forget off hand).
That's all I can think of, hope it helps

...I finally looked at my SDCard via my brother's phone.
Every thing in my SD Card pretty much has "Font" in front of it in regards to the name.
I mean... Yahoo became FontsYahoo.
wat

Solved.
For those who were wondering, I found out that I had to rename the recovery file to the PBNASFASodhwhatever it was.

Related

Soft brick installing GingerbreadlatinIME.zip

I just tried flashing the Gingerbreadime.zip and followed the directions to the letter and I experienced my first soft brick. The phone went into a boot loop at the mytouch screen. Luckily I was able to go into Recovery and restored the backup I had made after rooting and turning s=off. It appears to have restored okay as I still have root etc. Does anyone have any idea how or why this happened ? This zip was posted in Droid-Life and was advertised as good for all android 2.2 devices. I have never used adb but have it set up on my phone so I guess I had better get more familiar with it. I have flashed my Vibrant numerous times using Odin and Rom manager but I don't believe that there is a similar program for the Mt4g (Odin that is) I guess I have been spoiled by my Vibrant as it seems to have more options to recover with and are easier to use from what I can tell. I do love this MT4g though It is probably the best all around phone I have ever owned. Any and all info and help is greatly appreciated.:
to my knowledge there has been no gingerbread port for our device yet. Your lucky you didn't brick your device.
tenbeau said:
I just tried flashing the Gingerbreadime.zip and followed the directions to the letter and I experienced my first soft brick. The phone went into a boot loop at the mytouch screen. Luckily I was able to go into Recovery and restored the backup I had made after rooting and turning s=off. It appears to have restored okay as I still have root etc. Does anyone have any idea how or why this happened ? This zip was posted in Droid-Life and was advertised as good for all android 2.2 devices. I have never used adb but have it set up on my phone so I guess I had better get more familiar with it. I have flashed my Vibrant numerous times using Odin and Rom manager but I don't believe that there is a similar program for the Mt4g (Odin that is) I guess I have been spoiled by my Vibrant as it seems to have more options to recover with and are easier to use from what I can tell. I do love this MT4g though It is probably the best all around phone I have ever owned. Any and all info and help is greatly appreciated.:
Click to expand...
Click to collapse
There are people experiencing the same thing in the Nexus forum. Personally I would stay away from anything that is not specifically built for this phone as its a completely different OS than Vanilla or Moto Droid or etc. etc.
bobsbbq said:
to my knowledge there has been no gingerbread port for our device yet. Your lucky you didn't brick your device.
Click to expand...
Click to collapse
yes I a sure am. I trusted the Dorid-Life site and should not have. Thanks for the swift response...
setzer715 said:
There are people experiencing the same thing in the Nexus forum. Personally I would stay away from anything that is not specifically built for this phone as its a completely different OS than Vanilla or Moto Droid or etc. etc.
Click to expand...
Click to collapse
I sure intend to and I should have got on this forum before I even attempted to flash it. Right now everything seems fine except I cannot get into recovery only clockworkimode recovery. I am holding down the volume down button and pressing the power button at the same time and the device just reboots. Any ideas and what could be causing that? I am embarassed to say that my ignorance that pushed me to flash that zip is probably at the root of it. Any steps that I can take to enable me to get into stock recovery to check and make sure S=off?
Edit: Just pulled battery and sim card and than put them back in and the device went into stock recovery and s=off so I hope that all is okay and I did not create some ghosts that will show up when I attempt to flash a rom later on.
Please post questions in Q&A section.
I did the same thing. I flashed the .zip file from droid life forum and got a success message when I installed it through recovery and mine never bootlooped. I didn't get the gingerbread keyboard but it didn't bootloop either
Sent from my HTC Glacier using XDA App
tenbeau said:
I sure intend to and I should have got on this forum before I even attempted to flash it. Right now everything seems fine except I cannot get into recovery only clockworkimode recovery. I am holding down the volume down button and pressing the power button at the same time and the device just reboots. Any ideas and what could be causing that? I am embarassed to say that my ignorance that pushed me to flash that zip is probably at the root of it. Any steps that I can take to enable me to get into stock recovery to check and make sure S=off?
Edit: Just pulled battery and sim card and than put them back in and the device went into stock recovery and s=off so I hope that all is okay and I did not create some ghosts that will show up when I attempt to flash a rom later on.
Click to expand...
Click to collapse
I think you mean bootloader? You only have 1 recovery. If you flashed clockwork you no longer have stock recovery. Vol Down + Pwr gets you to bootloader or SPL where it shows S=off.
I did not flash the zip (sounds like an overkill to flash a zip for new KB). I ADB pushed both files and got a FC on multi-touch KB... oh well, I like HTC_IME better anyway
tenbeau said:
I sure intend to and I should have got on this forum before I even attempted to flash it. Right now everything seems fine except I cannot get into recovery only clockworkimode recovery. I am holding down the volume down button and pressing the power button at the same time and the device just reboots. Any ideas and what could be causing that? I am embarassed to say that my ignorance that pushed me to flash that zip is probably at the root of it. Any steps that I can take to enable me to get into stock recovery to check and make sure S=off?
Edit: Just pulled battery and sim card and than put them back in and the device went into stock recovery and s=off so I hope that all is okay and I did not create some ghosts that will show up when I attempt to flash a rom later on.
Click to expand...
Click to collapse
make sure fastboot is checked off otherwise you cant get into the bootloader. to make sure it is off go to: menu, settings, applications and uncheck fastboot. you're good to go then. to get into recovery, you can do it thru bootloader or by opening up rom manager and clicking on the "reboot to recovery" option
setzer715 said:
There are people experiencing the same thing in the Nexus forum. Personally I would stay away from anything that is not specifically built for this phone as its a completely different OS than Vanilla or Moto Droid or etc. etc.
Click to expand...
Click to collapse
the website was not specific enough. the port at the current moment is for motorola droid devices. they should have been more specific instead of saying any rooted 2.2 android phone. even if you do get it on your phone, its only going to force close every time you try and type something. thats what happened to me, so after about 24 hours i said **** it and removed it. swype in my opinion is better anyway. im trying to port the g2 swype to our phone so we can have a swype with a mic on the keyboard. oddly, ours didnt come with one.

[Q] stuck in boot loop; tried just about everything

I've been ROM-hopping, trying Synergy, Alliance, Myn, and several others. On the last one, MikG 2.3, I had it loaded up and working fine. I started installing apps from the Android Market. That, too, was going fine, until it suddenly rebooted in the middle of an app download/install.
It went to the white screen with HTC EVO 4G on it, and then went black, then back to the white screen, over and over.
Six hours later, I'm still stuck in the loop. To make matters worse, I accidentally lost root (I see "S-ON" at the top). So now I'm stuck without root until GB is rooted successfully, which hopefully isn't tooooo far off in the future.
But that's the least of my concerns. I would be extremely happy with a stock install of any sort at this point, but I can't get anything to load. No recovery, no ROMs, but I can get into HBOOT so I'm able to try to load any PC36IMG.zip files. The last one I tried was the "PC36IMG_SuperSonic_GB_Sprint_WWE_4.24.651.1_Radio_2.15.00.05.02_NV_2.15_release_199233_signed.zip" (renamed to just PC36IMG.zip, of course). It appears to load just fine and in the end says "Update Complete... Do you want to reboot device?"
I choose yes, it reboots... and we're back in the loop. I have no idea what to do or try at this point. Any help anyone can provide would be greatly appreciated! My next step is to take it to the Sprint store, but that's over an hour away and will have to wait till the weekend.
Thanks everyone!! If you need any more information, let me know. Believe me, I'll be monitoring this thread closely!
/Kevin
I'm sure uve heard this before and prob won't work but worth a try....try reformatting ur SD card and then flashing the file in bootliader again. Could be a corrupt SD card
Papa Smurf151 said:
I'm sure uve heard this before and prob won't work but worth a try....try reformatting ur SD card and then flashing the file in bootliader again. Could be a corrupt SD card
Click to expand...
Click to collapse
Yeah, I tried. I have several SD cards of varying sizes (4GB, 8GB, and my primary 16GB). Formatted the 4- and 8GB ones and tried from each, but no go. Thanks for the try though!
/Kevin
Reset phone to recovery (stock), choose fastboot. Plug in USB to computer.
Look for the correct ruu exe file and ruu it via exe method
trim81 said:
Reset phone to recovery (stock), choose fastboot. Plug in USB to computer.
Look for the correct ruu exe file and ruu it via exe method
Click to expand...
Click to collapse
Just did it and the process went well, said it was successful... but it's still stuck in the same loop. I'm thinking the phone is beyond repair. Thanks for trying, though. It really looked like it might work for a second.
/Kevin
what was the app?
That's what I want to know and how do you get accidentally to S-On?
Put the phone in a refrigerator ... as crazy as it sounds, it might be the infamous overheating issue.
Put in refrigerator, for about 5min
The app was "Kid Zone" (Zoodles), but I'm not blaming the app by any means. I've used it for a long time, it's highly-rated in the market, etc. I'm sure it's just a coincidence.
As far as getting back to S-ON, I think it must have been when I flashed the stock recovery. I was flashing so many things out of desperation that I can't swear to that, but I'm pretty sure that's what did it. Now that it looks like I'm heading to the Sprint store tomorrow, I guess it's a GOOD thing it's back to S-ON. Heh.
Pretty sure it's not heat-related. My phone was off all night (since it's not usable) in an air conditioned room, so it's cool to the touch. I tried the RUU process again with the same results. (I'm not sticking it in the refrigerator, because I'm afraid of activating the water-damage sensor -- I don't want any excuses from Sprint when I bring it in tomorrow!)
Appreciate the help!!
/Kevin
That sucks, but tbh, I have yet to see one case of anyone at Sprint checking a bootloader to see if a phone is S-On. MOF, I bet if it doesn't boot at all, or is a stock ROM , they wouldn't even know the difference.
HipKat said:
That sucks, but tbh, I have yet to see one case of anyone at Sprint checking a bootloader to see if a phone is S-On. MOF, I bet if it doesn't boot at all, or is a stock ROM , they wouldn't even know the difference.
Click to expand...
Click to collapse
I hear ya. I haven't run into any techs at my local stores that are knowledgeable about this kind of stuff. (I know others have, so you never know, but I have yet to see one.)
/Kevin
To conclude this: I went to the Sprint store today where they assured me they would reload the software but it would take 1.5 hours. I came back 1.5 hours later... and they handed me a new (refurb) EVO. They said they weren't able to load anything on the phone.
So, no surprise with the outcome there. I was fairly certain they were going to have to replace the EVO, and they did.
Thanks to everyone who tried to help, but it was just beyond help!
/Kevin
I had that same problem with my phone back in November. Continues boot loop. Finally, having boot loop for 8hrs, I took it to Sprint and they replaced my phone. They called it a power cycle issue. $35 new refurbished phone works well. Never had a problem since.

[Q] stuck at shut down screen after interrupting update

tl;dr: Interrupted update. cant do jack. tried acer tech support. failed
I grew bored with waiting the two minutes for my tablet to install the new update. so i stood up and hit the power button to put it to sleep like a boss. then i cam back later, the lock screen was unresponsive
i figured out be double tapping the pwr button i was able to unlock the tablet to see the powering down screen (see attachment). I can get to the setting menu, but evrytime i try to mess around in it, the window closes itself.
an interesting note is that the time is wrong, and the battery suddenly went from 100% to 15%
I called acer tech support, and with ther guidance...
pressed the reset button to no effect
powered on holding the pwr & vol- buttons down to get an error (see attachment). then the tablet turns off.
Ive dled some "update.zip" files i found online that are supposedly used to unbrick the tab... but i just got the same error picture(see attachment)
one other thing i tried was to hold the power and vol+ buttons. this cleared a chache, but had no other effect.
I am a noob at droid, but not to tech. i would like to avoid perma bricking, and im unsure about mailing this in. waiting is gay. I would like to restore it to factory settings w/o rooting it etc. as ive never done that before. but im not opposed to installing a CFW if it somes to that...
Im looking for ideas guys here guys. wtf is wrong with this thing?
Haha
Lmao "hit the power button to put it to sleep like a boss", funny ****.
Can't help you though sorry
ive been around he web, and have seen this exact series of symptoms happen to a handful of other guys... i haven figured out a solution yet, and it is looking more and more like ill be sending it in via warranty
my best guess at this point is i have corrupted a crucial system file. as to why i can do jack in the factorys recovery mode... idk. but then again, idk what the factorys recovery mode should look like or how it would function. youtube only shows CWR... which i dont have
if i believed i could anything reasonably withing my abilities, i would... but voiding the warranty on a long shot seems dumb.
still ANY ideas would be great
I too faced exactly the same problem today.. Dunno why this is happening... I am too worried now... Kindly post the solution as you find them...
Am sure calling tech-support is just waste of time..
Thanks in advance..
IM GOLDEN...
Ive reflashed to the original factory build. the problem was with the "update.zip" files i have been using. i guess they were corrupt.
multiupload<dot>com/WCT2FYLMQC
this is the file i used. I tried several from other guides, etc... a guy on another board told me to use this one. i put it on the root of my SD card, then held the power and vol- buttons until the loader had started. it took awhile, and it looked like it froze during the process...
DONT TOUCH IT
just let it do its thing, and it will reboot itself and run through the setup process like when it was new.
npena said:
IM GOLDEN...
Ive reflashed to the original factory build. the problem was with the "update.zip" files i have been using. i guess they were corrupt.
multiupload<dot>com/WCT2FYLMQC
this is the file i used. I tried several from other guides, etc... a guy on another board told me to use this one. i put it on the root of my SD card, then held the power and vol- buttons until the loader had started. it took awhile, and it looked like it froze during the process...
DONT TOUCH IT
just let it do its thing, and it will reboot itself and run through the setup process like when it was new.
Click to expand...
Click to collapse
How to put this file on the root folder when am not able to switchon the Tablet itself... and how reliable is this file??
stuck on same screen also!
My friend and i who both purchased this Acer Iconia tab are both having the same problem. We both received a message on the tablets to do the update. We both got stuck and have gone thru tech line and there is no remedy. She was able to return hers within the 15 day period; I on the other hand am a week over that so have to mail it to Acer for repair. I'm thinking this is more than a cooincidence and there is a problem more spread... Acer would neither verify or confirm....
buntzmehta said:
How to put this file on the root folder when am not able to switchon the Tablet itself... and how reliable is this file??
Click to expand...
Click to collapse
He said the root of his SDCARD. You can take out the sdcard and put it in a sd cardreader on a computer and copy the file to it then put it back in the tablet. The file worked for him so it might be worth trying. Just have patience while it is loading as some of these updates take a while to load and sometimes you may not see anything happening but it is. The more patches and roms you load on Android the more you'll learn to just leave it alone and let the updates finish. Its pretty rare for updates to be messed up. Its usually people getting anxious and clicking on stuff.
Good luck
Sent from my A501 using Tapatalk
still stuck on shutdown screen any updates?
Anyone had any luck with a fix? If not --sending it to Acer for warranty repair after the hurricane hits..Sure hope this isn't a wide spreasd Acer issue do to the new download. Wish I could just return the thing all together. Worked well while I had it a whole 3 weeks...... Thanks in advance for any information.
npena said:
IM GOLDEN...
Ive reflashed to the original factory build. the problem was with the "update.zip" files i have been using. i guess they were corrupt.
multiupload<dot>com/WCT2FYLMQC
this is the file i used. I tried several from other guides, etc... a guy on another board told me to use this one. i put it on the root of my SD card, then held the power and vol- buttons until the loader had started. it took awhile, and it looked like it froze during the process...
DONT TOUCH IT
just let it do its thing, and it will reboot itself and run through the setup process like when it was new.
Click to expand...
Click to collapse
Thanks a lot dear npena.. you are simply great.. i was very anxious initially to try your method as no other member here who face the same problem thanked or recommended your suggestion...
I tried it and it worked... I am really very thankful to you...
Cheers..
you are my hero indeed.. thank once again..
BuntZ
Friends, who face this problem you must try it... it just takes few mins b4 you can get your acer tab to work again beautifully without loosing any settings or installed apps... they remain intact...
Yay!
Glad you got it running again - had a similar problem when doing a ota update myself, was so worried I bricked the tab, went thru about 7 update.zip files until I found one that magically worked, letting me get back into the system and flash the correct rom for my region
hi! i have the same problem with my a500. I write a guide to solve this problem. Problem in firmware. here is the gude http://forum.xda-developers.com/showthread.php?t=1572622

[Q] Cant Seem to Root EL30. Need help!

Ill start this saying, yes, im a noob. I rarely post or visit unless i have problems.
But i do have experience rooting this specific phone before. But this time around its giving me a LOT of problems...
Ill start with:
Samsung Epic 4g (D700.0.5)
FM 2.3.6 (GB)
BB EL30
K 2.6.35.7
Now i will attempt to explain all the problems as well as what i have done to try to fix them and i will give as many links to the pages that i used for guidance as i can.
As i said, i have experience rooting this specific phone in the past. I ran a stock rooted ROM and everything was fine other then some glitches that i just learned to live with. But about 3 months ago i got a few more problems that have been driving me crazy so i desired to reroot.
When i power down the device, it will not turn back on just by pressing/holding the power button. Removing the battery, reinserting it, and holding the power also dose not work. I finally figured out that i have to remove the battery, replace the battery, then quickly (before the on-screen battery disappears) insert a charging cable thats connected to a power source. Then when the battery turns green (even with minimal power or full power) i can then power it on, but only when the on screen battery shows green. If i wait too long and it disappears it will not work and i have to start over from the beginning. (Removing Battery...) That was the 1st problem.
Soon after this happened (maybe 1-2 weeks) my phone started doing random shutdowns and not powering back on (i assume because it didnt have a power source connected). This would happen at anytime of the day or night, even when it was connected to a charger and actively charging. Yesterday i finally had the last of it and started researching this problem. I found that apparently some/all of the epics have this problem in time. From what i read the micro(or mini im not sure) USB port dosnt fit 100% snugly. So it causes heat. This heat causes corrosion and eventually leads to this problem. (I have never got this phone wet in the 1.5 years i have had it, i take very good care of my electronics.) Around the time this started my phone also would drain its self in about 2-3 hours, this was due to it constantly thinking i was plugging and unplugging it from a computer and requesting that i choose from the 3 options of mass storage.... Eventually the whole screen turning black with the android and the 3 buttons went away but the pop up on the notification bar continued, and as already said, it will drain the battery quickly.
NOW on to the rooting problems.
I dont remember what rom i was running originally, but following a few videos from QBKing77.
I odin'd back to EC05. This went fine no problems. (Useing odin 1.85)
I then tried to use the e4gtauto.zip file and running the "RUNFIRST.bat"
Used option A (install Root not EL13/newer)
Everything went though like it was suppose to. No errors or problems. Phone rebooted into recovery rather then to the lock screen.
Not remembering how to use recovery, i did some research, apparently the camera button is SUPPOSED to be the select button, but this did not work for me at all. After several manual reboots (pulling battery) this was the only thing i could get to (not even download mode to try to flash back to EC05 again). I did some research and found a post that said the "home" button on the front of the screen was his selector for some strange reason. This worked for me. I selected "reboot now" or something like that (the 1st option) and it rebooted into what i was thinking was a rooted rom, checked and there was no SU, or BusyBox (as said would happen in the e4gtauto).
I downloaded an su.zip and figured i would flash it with CWM (last time i installed CWM it was "purple" or 3.1.0.1)
Well it seems that my CWM is gone... i did the ever famous "3 finger salute" of Vol Down + Camera + Power and nothing except that i had to select "reboot phone" again from what i believe is stock recovery. Which booted me back into EC05.
By this time it was late at nite (2am or so) so i went to bed, over night apparently it updated and is now EL30. Thinking this was a good thing (and deff proving im not rooted) so today i tried rooting it as EL30.
Still do not have CWM seemingly.
Also would like to note, inorder for me to get to download mode, i have to take out my SD card, take out my battery, plug in the phone, and hold 1+power when the green power indicator comes on as stated above. This is the only way i can get into DownloadMode (if that helps at all)
If i could get any information on how to root from EL30 i would appreciate it greatly!!!
I will answer any questions as fast as possible, and i will provide as much information as you request when as soon as possible.
Thank you all in advance.
LATE:
Im not able to post links... so i cant give all the steps ive followed so far, I have attempted to take out all infomration already stated related to a link or video... Sorry.
I can do this for you remotely via teamviewer 7 google it and install it pm me the id and password and ill do it all for you
Oh and you used the epic touch one click root... not ours.. and el30 doesn't work on one click root.
Sent from my SPH-D700 using xda premium
As i was writing the above i thought of something. What if i do the same thing i have to do in order to get into download mode to boot into CWM.
No, this dosnt work, it brings me back into the what i believe is stock recovery. I decided to mess with the "install from sdcard" option. I tried the various .zips i have on there and they all fail a signature check.
YourLordAndMaster said:
As i was writing the above i thought of something. What if i do the same thing i have to do in order to get into download mode to boot into CWM.
No, this dosnt work, it brings me back into the what i believe is stock recovery. I decided to mess with the "install from sdcard" option. I tried the various .zips i have on there and they all fail a signature check.
Click to expand...
Click to collapse
You have the wrong recovery installed... you used the epic touch one click root... ... just go get teamviewer and ill fix it for you.
oh but now your on stock recovery because samsung has a script in the kernel to restore the stock recovery upon boot.
The rooting has been fixed.
I didnt install a CWM file apparently
and i also did a lot of bad things
Big thanks to "Big Goron" for the help he provided

tmobile s8 boot loop-ish

hey all,
Saturday morning a wake up to my alarm on my phone (SM-G950U T-Mobile Stock since new) and turn off the alarm and proceed to check email and scroll social medias. A few minuted later phone turns off and starts boot looping. Occasionally it would boot to home screen and i could unlock it but then maybe 30 seconds later it would start boot loping again. Now it either just boot loops or boots straight to recovery . I have tried flashing current firmware in case it was corrupted and i have tried accessing it through ADB. I know for a fact USB debugging is on because I just used abd to pull wifi passwords 2 weeks ago, but when I try to [ abd devices] if comes up as unauthorized and I cannot proceed. I know everyone will suggest a factory reset, but I am hoping someone has a trick for extracting files. I dont care about most on my phone, but I would like to save the pics from my GF and I trip this past august. Apparently I didnt have my photo library set to sync to cloud -_-
thanks
-chip
update: it appears there is a pattern. it boot loops or boots to recovery (after a blue failed system update screen) 99% of the time. the 1% it boot fully and then crashes is only when battery is 0% . it for some reason is only trickle charging and isnt getting enough juice when it does boot fully to stay on . But if i leave it charging a while it will then only boot loop or boot to recovery. Strange...any way I had enough time this past boot to reauthorize usb debug.....wish me luck with adb
....nevermind. still shows up as unauthorized
chip102 said:
hey all,
Saturday morning a wake up to my alarm on my phone (SM-G950U T-Mobile Stock since new) and turn off the alarm and proceed to check email and scroll social medias. A few minuted later phone turns off and starts boot looping. Occasionally it would boot to home screen and i could unlock it but then maybe 30 seconds later it would start boot loping again. Now it either just boot loops or boots straight to recovery . I have tried flashing current firmware in case it was corrupted and i have tried accessing it through ADB. I know for a fact USB debugging is on because I just used abd to pull wifi passwords 2 weeks ago, but when I try to [ abd devices] if comes up as unauthorized and I cannot proceed. I know everyone will suggest a factory reset, but I am hoping someone has a trick for extracting files. I dont care about most on my phone, but I would like to save the pics from my GF and I trip this past august. Apparently I didnt have my photo library set to sync to cloud -_-
thanks
-chip
update: it appears there is a pattern. it boot loops or boots to recovery (after a blue failed system update screen) 99% of the time. the 1% it boot fully and then crashes is only when battery is 0% . it for some reason is only trickle charging and isnt getting enough juice when it does boot fully to stay on . But if i leave it charging a while it will then only boot loop or boot to recovery. Strange...any way I had enough time this past boot to reauthorize usb debug.....wish me luck with adb
....nevermind. still shows up as unauthorized
Click to expand...
Click to collapse
Ive had similar cases happen with older models. May be time for a battery. They will do crazy **** when the battery crashes. When you flashed stock firmware you lost adb authorisation. Need to get the system back first for that.
TheMadScientist said:
Ive had similar cases happen with older models. May be time for a battery. They will do crazy **** when the battery crashes. When you flashed stock firmware you lost adb authorisation. Need to get the system back first for that.
Click to expand...
Click to collapse
thank you very much. my battery life was greatly suffering and the USB-c port was worn pretty bad. Ill grab a new battery and hope that works.
chip102 said:
thank you very much. my battery life was greatly suffering and the USB-c port was worn pretty bad. Ill grab a new battery and hope that works.
Click to expand...
Click to collapse
Cheapest fix in my opinion. I saw another thread a guy dropped his. Now detects 9008 how to fix. More than likely a phone wont just not boot. Or lose programming unless a hardware issue. So if it was just running and quit. Not modding stuff really. More likely than not its gonna be some form of software. But hardware.
TheMadScientist said:
Cheapest fix in my opinion. I saw another thread a guy dropped his. Now detects 9008 how to fix. More than likely a phone wont just not boot. Or lose programming unless a hardware issue. So if it was just running and quit. Not modding stuff really. More likely than not its gonna be some form of software. But hardware.
Click to expand...
Click to collapse
Replaced Daughter board and battery. No improvement :/ bummer
the only time i can get it back into recovery is after a "successful" flash with odin. by successful i mean that it says it worked but it just continues to boot loop or boots to recovery. attached is a picture of the info i get in recovery every time. hope someone can shed some light in the issue. im using my old phone so i dont feel pressured to call the data a loss and try a factory reset just yet....my old phone is a POS though
chip102 said:
the only time i can get it back into recovery is after a "successful" flash with odin. by successful i mean that it says it worked but it just continues to boot loop or boots to recovery. attached is a picture of the info i get in recovery every time. hope someone can shed some light in the issue. im using my old phone so i dont feel pressured to call the data a loss and try a factory reset just yet....my old phone is a POS though
Click to expand...
Click to collapse
Yea some one tried to root it using the edl safestrap thread. Only wsy to fix it is filled the steps and reflash jrkruses pie rom. One of my mother boards are in the same state. That's the only way dm verity fails. Is his rom method.
There's some easy to flash a cache wipe in Odin but I hadn't found it yet. I have 2 mother boards and one is identical. I flash this stock and lose download or recovery. but the errors you show are only from doing that edl safestrap
Ill be honest..i have no idea what you are talking about. Ive messed with the software with previous devices and never heard of safe strap. This one has been bone stock since I got it from Tmobile and i haven't attempt to flash anything until i had this issue. never tried to root it
TheMadScientist said:
Yea some one tried to root it using the edl safestrap thread. Only wsy to fix it is filled the steps and reflash jrkruses pie rom. One of my mother boards are in the same state. That's the only way dm verity fails. Is his rom method.
There's some easy to flash a cache wipe in Odin but I hadn't found it yet. I have 2 mother boards and one is identical. I flash this stock and lose download or recovery. but the errors you show are only from doing that edl safestrap
Click to expand...
Click to collapse
chip102 said:
Ill be honest..i have no idea what you are talking about. Ive messed with the software with previous devices and never heard of safe strap. This one has been bone stock since I got it from Tmobile and i haven't attempt to flash anything until i had this issue. never tried to root it
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s8/development/root-t3904613. This thread can help you at least get pie back up and running. I wouldn't mess with no more. I haven't had much luck with mine. But I did get it booting again

Categories

Resources