[Q] heLp me Please.. - iPAQ rw6828, XDA Atom General

suddenly last night my o2 atom can't boot and always restart if i press the power button..
anyone can't heLp me Please..
sorry for my bad engLish..
i'm indonesian,

ardiyan_ie08 said:
suddenly last night my o2 atom can't boot and always restart if i press the power button..
anyone can't heLp me Please..
sorry for my bad engLish..
i'm indonesian,
Click to expand...
Click to collapse
try to hard reset your device by way of Press and hold the power button, then use the stylus to press the soft reset button at the same time

i try to hard reset,but stiLL can't start..
the hard reset screeb appear but if i press the green n red button the phone restart again and again and aLways stuck in o2 screen..

ardiyan_ie08 said:
i try to hard reset,but stiLL can't start..
the hard reset screeb appear but if i press the green n red button the phone restart again and again and aLways stuck in o2 screen..
Click to expand...
Click to collapse
there seems to be file system needed for the startup process has been lost or erased so that cause the device to fail in louding windows me, so I think you have to reflash your device! way the way, how many versions of windows on your device...??

finaLLy my atom LIve again..
probLem soLved..
thanks to mas hakim rahman..

Related

9100 stuck in bootscreen, hard reset no go

Well I installed card export, and got some errors, after like the 2nd error my 9100 resetted itself and is stuck in the boot screen with cloads now.
A hard reset is no go, just behaves as a normal reset, and I'm pretty sure I red about this problem in another thread somewhere here, just can't seem to find it.
Anyone got an idea?
The only thing it shows now is:
IPL 1.01
SPL 1.01
GSM 1.13.10.0
OS 1.6.7.1
I am also stuck on the boot screen after my ROM update froze! Is this device now dead?!?! Please tell me there is a way to fix it!
Press and hold camera button and press resett button while you holding camera button.
now you enter bootloader (tree color screen) connect device to pc and run update you had on your device before it crached
Got it!!!
Hold down the Voice Button plus the Camera button at the same time and hit the reset button. That takes you into bootload mode. Then you will have a USB connection to the PC - not via active sync. Run one of the RUU update programs and you will be back....
At least it worked for me!
as it did for me
kjk said:
Press and hold camera button and press resett button while you holding camera button.
now you enter bootloader (tree color screen) connect device to pc and run update you had on your device before it crached
Click to expand...
Click to collapse
My soft reset button is not working. I can only reset by taking battery out of mda. What to do now? Help!

htc hera100 help

anyone know how to do hard reset to in htc hera100 to remuve code security code any idea
thx for help
where did you find it....
neptune said:
where did you find it....
Click to expand...
Click to collapse
Press the 2 function buttons (Above the Windows Button and the Ok button)
Hold them down, now use your stick to do a soft reset (While you keep these 2 buttons down) Your system will restart and you will get a message that your PDA will do a hard-reset. Once you get this message press the green Phone button. While you do this you will accept the fact that your hard disk will be formatted and the system will be reinstalled proberly.

Hard Reset problem - HELP!!

Hey guys, obviously f**kd up my K-Jam and it's crashing on boot.
I am trying to hard reset by holding the communication manager and voice dial buttons and then pressing the soft reset.
The screen comes up asking me to press the SEND button to restore to factory default or any other button to cancel. when i press the SEND button, nothinggg happens.
I am stuck, unable to boot, unable to hard reset, unable to soft reset. Need some real help on this one guys.
Thanks in advance.
Aahh, ok, its done . Dunno where i was going wrong but finally managed . Thanks anyways . This place rocks.

diamond 2 unresponsive

i installed the Ezinput from http://forum.xda-developers.com/showthread.php?t=536215 for wvga... i installed it, then it said a reset is required to finish intallation. after the reset, it went to the touch diamond 2 boot up screen, after that was over, then screen displayed nothing. its black, and usb does not respond when i connect it to the computer. any ideas? i already tried the reset using teh red button. took out the memory card, where i install the .cab, still doesnt work. any help would be greatly appreciated.
If it's totally unresponsive from boot, hard reset it. Hold Volume Down and press the "red button" to reset it. It'll go back to factory settings.
same problem here, help needed!!
i tried to restore it to the factory setting using volume down and red button but when the phone flashes it shows me this three color screen with the message "serial" on the bottom side of the screen, any ideas on what should i do???
thanks in advance...
To perform a Diamond 2 hard reset
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see a message on the screen.
alwaysrun said:
i tried to restore it to the factory setting using volume down and red button but when the phone flashes it shows me this three color screen with the message "serial" on the bottom side of the screen, any ideas on what should i do???
thanks in advance...
Click to expand...
Click to collapse
What you did is boot in "bootloader mode"; in that mode you can try to flash again the original ROM.
thanks
thanks a lot guys, your help is well appreciated, i finally managed to flash the phone bios and now trying to install the original rom, thank you again

[Q] Help cursed Logo boot infinite

Hello everyone I have a problem that is driving me crazy!
Yesterday I changed the font with my l5 (with App romtoolbox because I had already done and I had gone well so I was unsure)
instead ... I still stuck on the logo loading Lg
Can someone give me some help? Son very sad.: Pianto:: Pianto:: Pianto:[SIZE="<font><font>3</font></font>"]
thanks
Il Gerry said:
Hello everyone I have a problem that is driving me crazy!
Yesterday I changed the font with my l5 (with App romtoolbox because I had already done and I had gone well so I was unsure)
instead ... I still stuck on the logo loading Lg
Can someone give me some help? Son very sad.: Pianto:: Pianto:: Pianto:[SIZE="<font><font>3</font></font>"]
thanks
Click to expand...
Click to collapse
what rom are you using? stock or custom? you can also make a factory reset (it will erase all your data) with this combination of keys:
while the phone is off(you may want to pull out the battery) with your left hand press Vol down key and the power key at the same time untill you see your leds on then release them and press home button untill you see the lg logo then just wait for the android to work dont get panic its normal just wait and after all that your phone will reboot and thats all you will have to configure it again will all your stuff
there is video on youtube with the procedure just search hard reset l5 on youtube (i cant post outside links)
hit thanks if this post helped you out :good:
LuiizFenix said:
what rom are you using? stock or custom? you can also make a factory reset (it will erase all your data) with this combination of keys:
while the phone is off(you may want to pull out the battery) with your left hand press Vol down key and the power key at the same time untill you see your leds on then release them and press home button untill you see the lg logo then just wait for the android to work dont get panic its normal just wait and after all that your phone will reboot and thats all you will have to configure it again will all your stuff
there is video on youtube with the procedure just search hard reset l5 on youtube (i cant post outside links)
hit thanks if this post helped you out :good:
Click to expand...
Click to collapse
Hello friend meanwhile forgive my english is very bad.
Thanks for the help I solved yesterday:
KDZ gave me that error 1002W....: Good: and almost did not make me do hard reset
Fixed thank god after so much patience I went into hard reset from there then I installed V20B and the phone until the V20D.
With the same friend the next "adventure"

Categories

Resources