Database Users

Overclock on GingerXperia

Does gingerxperia support overclock by itself?
I see in cyanogenmod setting overclock option and when i change it to (for ex. 729 mhz) i go back to home screen and the return to overclock setting i see it return to default (600 mhz). Why?!!
Also SetCPU doesn't work!
Do i have to install custom kernal??
*In MiniCM-7 overclock works fine from cyanogenmod settings.

1Fawwaz said:
Does gingerxperia support overclock by itself?
I see in cyanogenmod setting overclock option and when i change it to (for ex. 729 mhz) i go back to home screen and the return to overclock setting i see it return to default (600 mhz). Why?!!
Also SetCPU doesn't work!
Do i have to install custom kernal??
*In MiniCM-7 overclock works fine from cyanogenmod settings.
Click to expand...
Click to collapse
You have to instal either the OC Module for stock kernel or any custom kernel which supports OC'ing. Are you sure it worked in MiniCM-7, except from having the ability to check the new amount of MHz?

TimeWasterNL said:
You have to instal either the OC Module for stock kernel or any custom kernel which supports OC'ing. Are you sure it worked in MiniCM-7, except from having the ability to check the new amount of MHz?
Click to expand...
Click to collapse
you mean this: Modules for stock kernel.: Flash with CWM. This package contains: AnDyX's Dualtouch for Cypress, AnDyX's smartass governor, ext3/4, X8Gesture, X8MDDI, X8UV.
but what is that "smartass governor and the x8mddi"??

1Fawwaz said:
you mean this: Modules for stock kernel.: Flash with CWM. This package contains: AnDyX's Dualtouch for Cypress, AnDyX's smartass governor, ext3/4, X8Gesture, X8MDDI, X8UV.
but what is that "smartass governor and the x8mddi"??
Click to expand...
Click to collapse
x8 mddi is a module that reduce the lag experienced by all custom roms. governor is the way the phone control the cpu. smartass governor operates by reducing ur cpu speed when the screen is off and increasing it when the screen is on.
Sent from my X8 using xda premium

1Fawwaz said:
Does gingerxperia support overclock by itself?
I see in cyanogenmod setting overclock option and when i change it to (for ex. 729 mhz) i go back to home screen and the return to overclock setting i see it return to default (600 mhz). Why?!!
Also SetCPU doesn't work!
Do i have to install custom kernal??
*In MiniCM-7 overclock works fine from cyanogenmod settings.
Click to expand...
Click to collapse
Im used before Gingerxperia v17 with stock kernel 2.6.29 and it allowed overclocking.No problems!Now i using same ROM with nAa kernel 2.6.29-nAa-08 and have no issues.Do you know when you will install custom kernel you MUST have opened bootloader!

overclock
i have 2.6.29 and i cant overclock my x8 , can anybody help me....plz

1.7 ghz kernel request

Hi, I installed the rom in my tablet hydro 4.1 jb, I wanted to know if someone could give me a flashable kernel with the ability to overclock 1.7GHz in performance. thanks in advance

There was one rom that I was using, at 1.66ghz actually makes it overheat, I don't think 1.7ghz is safe tho
http://forum.xda-developers.com/showthread.php?t=1901784
I juz flash it two days ago and it was stable but it did overheat so be careful...and u have to flash v01 first
Sent from my ST25a using xda app-developers app

i've done everything but the max oc with this rom is 1.3 ghz, i don't know why...

anthraxx90 said:
i've done everything but the max oc with this rom is 1.3 ghz, i don't know why...
Click to expand...
Click to collapse
maybe, because you did not put it in performance mode
attached is a OC kernel for 1.66ghz, do NOT use deadline I/O scheduler, its buggy, CFQ with interactive governor is the way to go !!

Psyloid said:
maybe, because you did not put it in performance mode
attached is a OC kernel for 1.66ghz, do NOT use deadline I/O scheduler, its buggy, CFQ with interactive governor is the way to go !!
Click to expand...
Click to collapse
Yah like what he said, need to be in performance mode to oc
Sent from my ST25a using xda app-developers app

[mini Guide]How to easily overclock Cpu and Gpu on XXLSA and XXLSC :)

Thanks to tegrak now we can easily overclock our note.
Lets Start...
1)First download Tegrak Overclock from playstore.
2)Open the app and in the main window press "Load Overclocking Module"
3)You are ready!!!!
You can easily go: (this are max frequencies, non recomended and stable)
CPU @ 1,6Ghz
Gpu @400Mhz
Lock your gpu @267Mhz
Change Governors an Io schedulers.
Undervolt
Undervolting and Gpu Oc is available only on paid version
Ps:Many thanks to altae for posting this in another thread

Great and use. Nofriils for boot at startup thank
Envoyé depuis mon GT-N7000 avec Tapatalk

Anyone tried? Does it work??
Sent from my GT-N7000 using Tapatalk 2

I try it just for game, and work fine sure

Tegrak NOT works with some kernels. For example, it doesn't works with CM kernel or any STOCK kernel. I'm using it, and I'm using HydraCore kernel. Be careful when you Overclock/Undervolt your CPU or GPU. If you reduce the voltages too much, the note will freeze.
Just to warn....
edit: i just saw the title is "on xxlsa and xxlsc". I didn't know it works with stock (or Philz) JB kernels. Could someone confirm that? Thanks

Overclocking-Undervolting is to do with care. I knew Tegrak 1 year ago... I've uninstalled it, because of easy unstability if not the correct values applied. We must read something about this before apply any value!
The best way, INMHO, to overclock, is to flash a Notecore or Hydracore OC Kernel, whose values has been adapted by developer to our Notes. And use CPU Master or SetCpu to create profiles.
To play with "volting" is an adventure...

Tegrak works on stock (philz) JB kernels. Stock vídeo player dont work if you use Tegrak. Its the only issue i have found.
KD-Rocket fusion+TSF shell+280dpi+1,6OC

You need the paid Version to clock the GPU to 400 MHz...

aftnoon2 said:
Overclocking-Undervolting is to do with care. I knew Tegrak 1 year ago... I've uninstalled it, because of easy unstability if not the correct values applied. We must read something about this before apply any value!
The best way, INMHO, to overclock, is to flash a Notecore or Hydracore OC Kernel, whose values has been adapted by developer to our Notes. And use CPU Master or SetCpu to create profiles.
To play with "volting" is an adventure...
Click to expand...
Click to collapse
Notecore or hydracore dont work on TW JB roms.
KD-Rocket fusion+TSF shell+280dpi+1,6OC

Bad-Pixel said:
Tegrak NOT works with some kernels. For example, it doesn't works with CM kernel or any STOCK kernel. I'm using it, and I'm using HydraCore kernel. Be careful when you Overclock/Undervolt your CPU or GPU. If you reduce the voltages too much, the note will freeze.
Just to warn....
edit: i just saw the title is "on xxlsa and xxlsc". I didn't know it works with stock (or Philz) JB kernels. Could someone confirm that? Thanks
Click to expand...
Click to collapse
Overclocking seems to work on xxlsc
From the man in your attic...

howard bamber said:
Overclocking seems to work on xxlsc
From the man in your attic...
Click to expand...
Click to collapse
Undervolt also? And oc/uv for gpu? Is it works also? It would be perfect!
Sent from my GT-N7000 using xda premium

I thought it was stable on jb, but it is far from it. Mine crashed and boot looped. Had to restore.
From the man in your attic...

howard bamber said:
I thought it was stable on jb, but it is far from it. Mine crashed and boot looped. Had to restore.
From the man in your attic...
Click to expand...
Click to collapse
I don't know the reason for your crash, but maybe you undervolted too much (or your cpu simply doesn't support the OC until 1.6).
I can give you the oc/uv values i'm using everyday (all perfect, no freezes or anything else). You can try these:
(my note has cpu group B and i'm using the hydracore 7.5 maxfu, but i guess those values are okay for almost every note with cpu group b and them don't depend from the kernel you're using)
[CPU]
1400 = 1225mV
1200 = 1150mV
1000 = 1050mV
800 = 1000mV
500 = 925mV
200 = 900mV
100 = 900mV
[GPU]
400 = 1000mV (i'm using this gpu overclock since few days, but it seems to be stable enough)
267 = 900mV
160 = 850mV
[SCHEDULER]
cfq (it was "noop", but i wanted to try this "cfq")
[GOVERNOR]
pegasusq
Everything with "set on boot" ON
Temperatures are ok, even with OC on cpu and gpu. (I remember you i'm using asylumPhoenix rom)
Maybe it will not solve your issue, but you can try

We cant download from playstore in our country
Any chance to have mirror link for download tegrak app?
Sent from my GT-N7000

guys be patient, dont judge JB from their leaks
stock JB will be a better experience
once the sources are released there will be more kernels to choose from......

farzin_silver said:
We cant download from playstore in our country
Any chance to have mirror link for download tegrak app?
Sent from my GT-N7000
Click to expand...
Click to collapse
I could give you a link to download it, but you couldn't use it because you need to buy the full version. The free version is needed ony to know if your kernel is compatible with the tegrak app

Bad-Pixel said:
I could give you a link to download it, but you couldn't use it because you need to buy the full version. The free version is needed ony to know if your kernel is compatible with the tegrak app
Click to expand...
Click to collapse
You can overclock THE Cpu with the free one, too. But GPU OC is not possible, nor undervolting is...

Petros_tigra said:
Thanks to tegrak now we can easily overclock our note.
Lets Start...
1)First download Tegrak Overclock from playstore.
2)Open the app and in the main window press "Load Overclocking Module"
3)You are ready!!!!
You can easily go: (this are max frequencies, non recomended and stable)
CPU @ 1,6Ghz
Gpu @400Mhz
Lock your gpu @267Mhz
Change Governors an Io schedulers.
Undervolt
Ps:Many thanks to altae for posting this in another thread
Click to expand...
Click to collapse
You forgot to add "only in paid version"
Sent from my GT-N7000 using Xparent ICS Tapatalk 2

Have you tried the market enabler app?
Sent from my GT-N7000 using xda app-developers app

[KERNEL][Unofficial][Discontinued] Semaphore JB 3.0.0c with Custom Features

This is the modified version of the Semaphore kernel, JB 3.0.0c.
Since so many people were asking me for it, I've decided to share it with you guys.
Disclaimer: I will only update this kernel when I have the time. So do not ask for ETA please.
Before installing this, please take your time to read the Original OP.
This kernel contains every features that the Semaphore Kernel offers but with some additional custom features.
Features (Based on latest Semaphore)
- Linux kernel 3.0.84
- LiveOC
- Custom Voltage
- Voodoo Sound
- BLN & CM LED
- 384MB - 409MB available RAM
- Compiled with Linaro 4.7.3
- O3 optimization
- Auto brightness driver
- Touch Wake
- Vibration intensity
- Deep Idle
- USB host driver
- Governor ondemand (default)
- ondemand: sampling_down_factor tunable by momentum, smooth_ui, early_demand
- Governor conservative (module, smooth_ui)
- Governor smartassV2 (module, smooth_ui)
- Governor interactive
- Noop I/O scheduler (default)
- Deadline I/O Scheduler (module)
- Simple I/O Scheduler (module)
- ROW I/O Scheduler (module)
- CFQ Scheduler (module)
- CIFS as module
- TUN as module
- Logcat disabled (as module only)
- Standard network packet scheduler
- Kernel log buffer size 4KB (from 128KB)
- Reduced debug info
- TinyRCU
- Fast Charge support
- WiFi PM_MAX when suspend
- CWM: AROMA Filemanager
- /system/etc/init.d directory creation if not exist​
Custom Features
Swap/Zram enabled
Normal OC'd over LiveOC
1.1 - 1.4GHz
In-call Volume Hack
Voodoo Color
Entropy Tweaks
Load_freq(4*HZ+61) to avoid Loadavg Moire
arm/crypto: Add optimized AES and SHA1 routines
Backport AIO (Asynchronous IO) from Linux 3.5
Zen IO Scheduler
V(R) IO Scheduler
FIOPS IO Scheduler
IntelliDemand CPU Governor
Lulzactive CPU Governor
Wheatley CPU Governor
Linux 3.0.85
BrazilianWax CPU governor
Adaptive CPU governor
Hyper CPU governor
InteractiveX CPU governor
Lioneheart CPU governor
OnDemandX CPU governor
Lagfree CPU governor
Dynamic FSync
Massive update to IO schedulers
SLQB memory allocator
UKSM 0.1.2.2
Frandom
Plus more features to come in near future....
By installing this, you'll receive no support from Stratosk because;
This is an Unofficial Semaphore Kernel
Stratosk does not support it
So do not bug him if you have a problem with this kernel. But bug me instead!
If you guys want to see some more features added to this, feel free to tell me and I'll try my best to add them to it.
Please note that there are 3 variations:
Normal versions: for CM10 or ROMs without hugemem configuration, available RAM 384MB - 396MB
"s" versions: for Slim Bean ROM or patched ROMs with hugemem configuration, available RAM 397MB - 409MB
"vc" versions: is Voodoo Color Mod
Downloads
Normal Version (384MB - 396MB):
Unofficial_Semaphore_JB_3.0.0c​Normal Version (384MB - 396MB) with Voodoo Color:
Unofficial_Semaphore_JB_3.0.0vc_c​
S Version (397MB - 409MB):
Unofficial_Semaphore_JB_3.0.0sc​S Version (397MB - 409MB) with Voodoo Color:
Unofficial_Semaphore_JB_3.0.0s_vc_c​
Thanks to
Stratosk
kasper_h
fishears
BLOWNCO
Alberto96
And to everyone else that tested the kernel for me.
Source
Original Kernel Source
Modified Kernel Source

How to:
How to enable Swap?​
To enable Swap, you'll need to create a swap partition on you External SD card. I recommend following this guide for it. http://forum.xda-developers.com/wiki/SD_card_partitioning
1. Make sure to backup everything from your SD Card first
2. Do not reformat your SD Card while it's still in your phone, take it out and plug it to your computer through a card reader!
3. I recommend that you only create a Swap Partition around 256MB
4. Follow that guide and when you reach to Step 3, select the option "Linux Swap"
5. When you finished following that guide, plug in your SD Card to your phone and Reboot to Recovery
6. Then flash this zip Enable Swap
7. Reboot your phone and you should be good.
8. To make sure Swap is enable, go to Terminal Emulator and type "free".
9. You should see some info at the bottom about Swap.
How to Enable Zram?​
To enable Zram, go to (Settings -> Performance -> Memory management.)
Or Flash this zip Enable Zram
How to use the OC'd Steps?​
To use the OC'd Steps, use Nstools or CM Performance Settings (Settings -> Performance -> Processor -> Maximum CPU frequency.)
If the chosen Frequency setting is not sticking with Nstools or CM Performance Settings, try using CPU Control Lite or Voltage Control.
I flashed the "s" version and now 720p recording or playback is not working?​
You'll need to flash HugeMem Libs first and then you should have your 720p recording or playback working again.
How to get rid of the Green Screen Flash and get the best colour if using VC version?​
To get rid of it, I recommend using the following Voodoo Color Settings. To change them, use Voodoo Sound app (Available from the market).
Color profiles
Voodoo profile v1
Screen RGB multipliers
Red: 286xxxxxxx
Green: 333xxxxxxx
Blue: 392xxxxxxx
Screen v1 gamma hack
*Reset to 2.3.3 Then Change*
Red: -26
Green: -30
Blue: -33
Or use this gamma hack (Might get the green screen flash but with a better looking colour, thanks to aduka)
Red: -40
Green: -40
Blue: -31
*If you're still getting the green screen flash, increase the "Screen v1 gamma hack" by +4 for the red, green and blue till you stop getting the green screen flash*

Changelogs And Download Mirrors
Changelogs:
*Changes in italic are custom features*
3.0.0c (04/07/2013)
- gpu: pvr: Update to DDK [email protected]
- net: wireless: bcmdhd: Update to version 5.90.195.104
- cpufreq: ondemand: Drop early demand
- UHID built as module
- CWM: upstream updates
- new version AromaFM 1.90 (thanks to amarullz)
Changes by sUsH667 (many thanks) :
- base updated to aromafm 1.90
- deleted all languages except english
- deleted all iconsets
- deleted all fonts except roboto
- added german language
- added iconset "generic" from older aromafm-version
- added preconfigured config
- added bookmarks for often used folders: /system, /sdcard, /emmc, /sdcard/Download
- Linux 3.0.85
- BrazilianWax CPU governor
- Adaptive CPU governor
- Hyper CPU governor
- InteractiveX CPU governor
- Lioneheart CPU governor
- OnDemandX CPU governor
- Lagfree CPU governor
- V(R) IO Scheduler
- FIOPS IO Scheduler
- Remove BFQ Scheduler
- Dynamic FSync
- Massive update to IO schedulers
- SLQB memory allocator
2.9.26 (06/06/2013)
- Linux kernel 3.0.80
- ondemand: Change the calculation of frequency target
2.9.25 (14/05/2013)
- Linux kernel 3.0.78
- Auto brightness: max_lux up to 6000
2.9.23c (29/04/2013)
- Linux kernel 3.0.75
- UHID built as module
- UHID implementation (thanks to pawitp and n8r for merging it to Semaphore)
- CWM 6.0.3.1
- Updated ROW parameters (Thanks to kasper_h)
- Use XZ compression method for both Kernel and Ramdisk
- Fix Memory Leak
- More under the hood tweaks. (Check Github for more detail on commits for Apr 19, 2013)
2.9.21c (10/04/2013)
- Linux kernel 3.0.72
- binder: backport from 3.9-rc (also port some other changes to support this)
- lowmemorykiller: updates from 3.9-rc
- logger: updates from 3.9-rc
- mDNIe: suppress some debug messages (and do so minor cleanup)
- Auto brightness: calculate the average of light sensor adc values instead of normalized brightness
- Auto brightness: Intoduce max_br_threshold tunable. Over this, the brightness is updated to its max value (thanks to Necromancer3)
- Enable again android_ram_console (caused bootloops to some devices)
- Lowmemorykiller: Intoduce a white list with PIDs (up to 6) that never been killed (use: echo "PID1, PID2" > /sys/module/lowmemorykiller/parameters/w_list)
- CWM 6.0.3.0
- built with Linaro 4.7.3 201303
- add option to Semaphore Auto Brightness for parabolic function (echo 0 > /sys/devices/virtual/misc/sema_autobr/linear)
- Added frandom (much faster random number generator)
2.9.18c (02/04/2013)
- Linux kernel 3.0.71
- CWM 6.0.3.0
- built with Linaro 4.7.3 201303
- add option to Semaphore Auto Brightness for parabolic function (echo 0 > /sys/devices/virtual/misc/sema_autobr/linear)
- Zen IO Scheduler
- BFQ IO Scheduler
- IntelliDemand CPU Governor
- Lulzactive CPU Governor
- Wheatley CPU Governor
- UKSM 0.1.2.2
2.9.15c (17/03/2013)
- Linux kernel 3.0.69
- CWM 6.0.2.9
- conservative: Fix sampling_down_factor functionality
- conservative: Fix the logic in frequency decrease checking
- conservative: a minor improvement
- built with Linaro 4.7.3 201302
- remove some kernel debug messages
- KSM enabled
2.9.13c (06/03/2013)
- Linux Kernel 3.0.68
- arm/crypto: Add optimized AES and SHA1 routines
- Backport AIO (Asynchronous IO) from Linux 3.5
2.9.12c (24/02/2013)
- Linux kernel 3.0.66
- USB HID support (as module: usbhid.ko)
- ondemand: early demand feature.
- Entropy Tweaks "Should reduce some lag"; (http://lwn.net/Articles/489734/)
2.9.10c (14/02/2013)
- Linux kernel 3.0.63
- Semaphore Auto Brightness: filter sensor values for more smooth updates.
- Added 1.1GHz to 1.4Ghz OC'd Steps.
2.9.9c (08/02/2013)
- Linux kernel 3.0.62
- Ondemand: a couple of optimizations
- Auto brightness: tiny improvement
- built with Linaro 4.7.3 201301
- Voodoo Color Mod
- In-call Volume Hack
2.9.8c (06/02/2013)
- Linux kernel 3.0.60
- Semaphore Auto Brightness: use default work queue instead of a creating new one (more resource friendly). Change coding style to be Linux compliant.
- Swap/Zram enabled
- 1200Mhz OC'd added
- Initial release of the Custom Kernel of Semaphore​

Re: [Kernel] Unofficial Semaphore JB 2.9.8.c
Do you suggest any changes to voltages if running this at 1200?
Sent from my SGH-I897 using xda app-developers app

Re: [Kernel] Unofficial Semaphore JB 2.9.8.c
m1batt1 said:
Do you suggest any changes to voltages if running this at 1200?
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
By default I've increased the voltage for the 1200MHz step to 1350 mV to make sure it's stable for everyone else as not every phone is same. But once your phone is stable at 1200MHz, you can undervolt the voltage until you find a sweet spot.
Like on my phone, I was able to undervolt the 1200MHz to 1275 mV.
Sent from my SGH-I896 using xda app-developers app

m1batt1 said:
Do you suggest any changes to voltages if running this at 1200?
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
I UV by 50 with this kernel and devil kernel the same. Stable enough for me
Also. Nick0703. Sorry for posting in Stratosk thread regarding your kernel.
I was wondering how to make the 1200mhz stick. I tried through settings and then tried with nstools. No go on reboot.
Sky

Re: [Kernel] Unofficial Semaphore JB 2.9.8.c
SkyboneNoya said:
I UV by 50 with this kernel and devil kernel the same. Stable enough for me
Also. Nick0703. Sorry for posting in Stratosk thread regarding your kernel.
I was wondering how to make the 1200mhz stick. I tried through settings and then tried with nstools. No go on reboot.
Sky
Click to expand...
Click to collapse
Did you try saving the settings with NsTools?
Sent from my SGH-I896 using xda app-developers app

Nick0703 said:
Did you try saving the settings with NsTools?
Sent from my SGH-I896 using xda app-developers app
Click to expand...
Click to collapse
Yeah i made sure i deleted all my init.d/nstools/semaphore saves in recovery prior to installing as well.

Re: [Kernel] Unofficial Semaphore JB 2.9.8.c
SkyboneNoya said:
Yeah i made sure i deleted all my init.d/nstools/semaphore saves in recovery prior to installing as well.
Click to expand...
Click to collapse
I'll upload my NsTools settings and you can try that. I'll do it like in an hour. As right now I have some other stuff to do.
Edit: Check your PM.
Sent from my SGH-I896 using xda app-developers app

Hey Nick0703 would you be able to get screen off min 100mhz max 400mhz settings into the kernel or is it not really needed? I guess it sits at 100Mhz idle. Also, are you able to deep idle? BTW 1200 is optional but it wont stick on reboot still. Your settings disabled nstools to default.

Re: [KERNEL] Unofficial Semaphore JB 2.9.8.c
Try cpu control lite or voltage control if the settings do not stick.

SkyboneNoya said:
Hey Nick0703 would you be able to get screen off min 100mhz max 400mhz settings into the kernel or is it not really needed? I guess it sits at 100Mhz idle. Also, are you able to deep idle? BTW 1200 is optional but it wont stick on reboot still. Your settings disabled nstools to default.
Click to expand...
Click to collapse
I could add the screen off min 100mhz - max 400mhz to the kernel but I don't think you'll see any difference from it. But I compile a test version with that option and see if there is any difference. And yes, I'm able to deep idle. Deep idle works fine with my phone but keep in mind that not all the captivates are the same.
And for the 1200MHz, try using CPU Control Lite or Voltage Control just like sephhi stated.

Thanks guys. Good looking app but it didn't work. Not sure why. Always able to set to 1200 on devil kernel 4.1.2

Re: [KERNEL] Unofficial Semaphore JB 2.9.8.c
Version 2.9.9sc has been compiled. But it will need to go through testing first as the kernel configuration file had some few changes.
I'll need 2 people to test it. If anyone is interested, send me a PM.
Sent from my SGH-I896 using xda app-developers app

Re: [KERNEL] Unofficial Semaphore JB 2.9.8.c
Nick0703 said:
Version 2.9.9sc has been compiled. But it will need to go through testing first as the kernel configuration file had some few changes.
I'll need 2 people to test it. If anyone is interested, send me a PM.
Sent from my SGH-I896 using xda app-developers app
Click to expand...
Click to collapse
I do believe your kernel has given me better battery life! Excellent work sir!
Sent from my SGH-I897 using xda app-developers app

Version 2.9.9c uploaded.
Enjoy!

Re: [KERNEL] Unofficial Semaphore JB 2.9.9c
Great stuff Nick! Zram and 1200 smooth as butter! I'm too lazy to make a swap partition. LOL!
Sent from a heavily modded Cappy from parts unknown. Slimbean/Semaphore. FTW.

Re: [KERNEL] Unofficial Semaphore JB 2.9.9c
mrsubway said:
Great stuff Nick! Zram and 1200 smooth as butter! I'm too lazy to make a swap partition. LOL!
Sent from a heavily modded Cappy from parts unknown. Slimbean/Semaphore. FTW.
Click to expand...
Click to collapse
Thanks man! And lol making a swap partition won't take you more than 5 mins.
Sent from my SGH-I897 using xda app-developers app

Perfect. Got it to stick 1200mhz! What boot loaders do you use Nick0703? I'm wondering if i9000 loaders would help with deep idle.
Would suck if it's just my phone.

Re: [KERNEL] Unofficial Semaphore JB 2.9.9c
SkyboneNoya said:
Perfect. Got it to stick 1200mhz! What boot loaders do you use Nick0703? I'm wondering if i9000 loaders would help with deep idle.
Would suck if it's just my phone.
Click to expand...
Click to collapse
Congrats man! And I'm using stock Rogers Gingerbread Bootloaders. You could give the I9000 Bootloaders a try but I wouldn't risk it if I were you.
Sent from my SGH-I897 using xda app-developers app

[KERNEL] Izer Kernel [23 FEB][CANCRO]

Izer Kernel​
Based on LAOS 14.1 Kernel Source.
CPU Governors: smartmax_eps, zzmoove, alucard, elementalx, interactive, conservative, ondemand, performance, lionheart, smartmax, intelliactive, intellidemand, wheatley, pegasusq, ondemandplus, yankactive, impulse, nightmare
CPU Hotplug: MPDecision, IntelliPlug, Alucard Hotplug, MSM, bricked
I/O Scheduler: noop, deadline, row, cfq, fiops, bfq, zen, sio, sioplus, vr
TCP congestion algorithms: westwood, reno, bic, cubic, highspeed, hybla, htcp, vegas, veno, scalable, lp,
Adreno Idler
Intelli Thermal
Faux Sound
KCAL
FRandom
USB fast charge
Vibration Control
CRC control
ARCH power
Powersuspend
Simple GPU Algorithm
Wakelock controls
Enabled ZRAM & Zcache
SeLinux: Enforcing
And some patches.
Big thanks to every author of the commits used.
XDA:DevDB Information
[KERNEL][CANCRO] Izer Kernel , Kernel for the Xiaomi Mi 3/4
Contributors
Shivam Kumar Jha, linuxxx
Source Code: https://github.com/ShivamKumarJha/android_kernel_xiaomi_cancro/commits/n
Version Information
Status: Stable
Created 2016-01-30
Last Updated 2017-02-08

DOWNLOAD:
AndroidFileHost
CHANGELOG:
Known Issues:
CM kernel source bugs (if any)

Great was waiting for this since I tried your ROM RR....!
I have one request that if possible please add KCAL controls also..

Thanks! Giving it a shot!

palgaurav00196 said:
Great was waiting for this since I tried your ROM RR....!
I have one request that if possible please add KCAL controls also..
Click to expand...
Click to collapse
will do

Thank you for this kernel!

After switching to custom kernel, I just now re installed on your Temasek ROM.
And I still can't change the maximum CPU frequency.
I like to keep my frequency at 1.5 GHz max to decrease heating problems.

Me_Ashish_ said:
After switching to custom kernel, I just now re installed on your Temasek ROM.
And I still can't change the maximum CPU frequency.
I like to keep my frequency at 1.5 GHz max to decrease heating problems.
Click to expand...
Click to collapse
yes because no changes in source.., it's a bug., hopefully it'l be fixed in future update(s)

Wifi broke after flashing on Beanstalk.
Any quick workaround for the time being?
Edit.
Suggest me a Gov and I/O Sched for balanced performance and battery. Thanks

Shivam Kumar Jha said:
yes because no changes in source.., it's a bug., hopefully it'l be fixed in future update(s)
Click to expand...
Click to collapse
OK. Plus the Vainglory game performance is laggy at maximum frequency too.
Issue is mostly with stock CM kernels, doesn't happen with almost any custom kernel in general. I can play the game smoothly at 1.5 GHz frequency.
The frequency and gaming lag issue keeps me away from using CM ROMs unless there is a good custom kernel to fix issues.
Will be looking forward to a improved build :good:

Slow charging!
it's a great job you have done. currently using your kernel. everything working fine except the very Slow Charging problem.
Please add support to the MIUI 7.0 marshmallow rom also thank you

I got random freeze with the kernel. I had plan to upload kmsg before but I installed custom kernel and left it. Although the custom kernel I installed itself already has freeze issues. And reinstalling this kernel again there is a freeze.
I have attached kmsg before installing custom kernel. Had to rename extension to docx to upload here.
BTW in temasek ROM. FM Radio on every boot asks root permission. And it doesn't remembers whether I said yes or no despite checking the check box of CM root permission. And whether I choose Yes or No. I get toast message afterwards that selinux set to permissive.

Support to the MIUI 7.0 marshmallow rom please

Very nice kernel! Excellent job! Please add miui support

Does it support MIUI KK?

Any plan to add oc ?

any update soon ? Thanks

bhaskar_j_borah said:
it's a great job you have done. currently using your kernel. everything working fine except the very Slow Charging problem.
Please add support to the MIUI 7.0 marshmallow rom also thank you
Click to expand...
Click to collapse
did you enable fast charging via kernel adiutor?
harris123424 said:
Support to the MIUI 7.0 marshmallow rom please
Click to expand...
Click to collapse
will do, but it will take time..
BIOLorenz said:
Very nice kernel! Excellent job! Please add miui support
Click to expand...
Click to collapse
thanks, i will
Prince Chandela said:
Does it support MIUI KK?
Click to expand...
Click to collapse
no i guess, based on cm13 kernel source
eroneko said:
Any plan to add oc ?
Click to expand...
Click to collapse
yupp, I will both CPU & GPU
marko94 said:
any update soon ? Thanks
Click to expand...
Click to collapse
sunday/saturday

Best kernel ! Using your kernel on CM13, everything works fine except pocket wake-ups, hope you add support s2w.

is possible to use with last MM Ivan Rom?