Related
Hello - I urgently need help with my Samsung Galaxy Tab.
I flashed a wrong PIT/PDA & what happened is:
- my Galaxy Tab does not reboot at all
- the flashlight in the back suddenly switched ON automatically
No matter how long I press the Power Button, the device switches off just for one second, and then the flashlight switches ON again - but no reboot.
I cannot get into download mode / when I try to use commands with Odin, it only says: error: device not found.
Odin does show my device ([COM:4]), it appears as: Added // only the download mode does not work!
When I tried to start SuperOneClick, trying to Unroot, it is stuck with: "Waiting for device"
Weirdly, though, my netbook does install the drivers automatically when I plug it in. Which means, my netbook can "read" the device.
Does anyone here know how I could make the extreme Hard Reset, without having to reboot?
--------------------------
If you think this post should rather go to the Developers section, please feel free to move it // I am thankful for any help
Have you tried connecting to it with ADB to see if you can reach it at this level (apart from with SuperOneClick)? Try installing the Droid Explorer application on your Windows PC and see if it will recognise your Tab. If it will you should be able to initiate a reset from the Droid Explorer UI. If it won't I would suggest that you are hard bricked and it will have to visit Samsung. Good luck!
Hello,
thank you for your advice.
adb does not detect my device ..
and, unfortunately, neither does Droid Explorer
Just find it so strange that ODIN does ..
but like you said -
I am also afraid, that this is a "hard brick" & I will go see the retailer tomorrow.
Thank you, though, for offering help.
QueenAmy said:
Hello,
thank you for your advice.
adb does not detect my device ..
and, unfortunately, neither does Droid Explorer
Just find it so strange that ODIN does ..
but like you said -
I am also afraid, that this is a "hard brick" & I will go see the retailer tomorrow.
Thank you, though, for offering help.
Click to expand...
Click to collapse
If Odin sees it, its not bricked. What image is on the LCD when Odin sees it, or is it blank?
rotohammer said:
If Odin sees it, its not bricked. What image is on the LCD when Odin sees it, or is it blank?
Click to expand...
Click to collapse
I guess the problem here is that even if Odin sees the USB device connected, if the Tab won't go into download mode then it's as good as bricked. With the SGS you can construct a USB jig with a 301k resistor between pins 4 and 5 of the micro USB to push the device into download mode if it won't respond any other way. I wonder if a similar thing would work for the Tab... Sounds like a challenge for someone who has two Tabs and doesn't mind experimenting a bit with one of them.
bdl1969 said:
I guess the problem here is that even if Odin sees the USB device connected, if the Tab won't go into download mode then it's as good as bricked. With the SGS you can construct a USB jig with a 301k resistor between pins 4 and 5 of the micro USB to push the device into download mode if it won't respond any other way. I wonder if a similar thing would work for the Tab... Sounds like a challenge for someone who has two Tabs and doesn't mind experimenting a bit with one of them.
Click to expand...
Click to collapse
lol, I'll get my cheap Chinese Tab cables this week and hack one up to test.
My guess is that Odin will only see the Tab when it is in download mode. Id try flashing it in that state and find out for sure. It sure cant hurt.
You went to your retailer?I have exactly the same problem!!
First of all - THANK YOU for having started this discussion.
Yes, I went to the retailer. My Galaxy Tab is with Samsung Technical Support now; will keep you posted.
To answer some earlier questions, yes ODIN did recognize my Tab; but the screen on the Tab remained totally black. Only this strange "flash" light on the back kept glowing.
rotohammer, if you really get to test what you mentioned before, I'd be interested to hear what happened - but, personally I would not recommend it, unless you are sure you want to risk completely ruining your dear Tab.
studio54 said:
You went to your retailer?I have exactly the same problem!!
Click to expand...
Click to collapse
I did ... and less than 2 weeks later ..
Update:
13-Jan-2011
Today noon I got a call from my retailer my Galaxy Tab was ready to be picked up & I was really lucky: my retailer said the repair would normally cost EUR 650.-
.. as I had damaged the whole mainboard ..
but as the Tab was less than 1 month old, they were so kind to do it w/in my warranty - so I did not have to pay for it.
I'm very relieved, as you can imagine.
Got my Galaxy Tab back with a brand-new mainboard, everything is working well &
I sure learned my lesson.
I will not flash the Galaxy Tab again.
Only because Galaxy Tab and Galaxy i9000 are both on Froyo, it does NOT mean that you can flash the same software!
I wanted to apply the 3 button combo fix on my Galaxy Tab but apparently it does not work!
Bricked mine as well, but mine is a weird case
I bring up the weirdest case of bricking so far, i was on an official Arabic (P1000JPJK2)Firmware, and i noticed a new Arabic release on SamsungFirmware.com (P1000JPJM3) i downloaded it and downloaded the .pit file, Started Odin v1.7 and unchecked repartition, selected the PDA and the pit and started the processes, odin finished and Reseted the device and give me the green light with the word PASS, however, the my p1000 decided to reboot into download mode automatically, so i rebooted the device manually and got stock in the Samsung Logo and keeps looping. so i decided to go back to my previous Rom but it will always fail and i would have to reboot my tab and it will show the good ol' Phon-PC logos, however, odin would see it and would flash anything i want. i tried flashing various versions of rom's but they would all fail... i tried repartition checked and unchecked and nothing worked, so lastly i decided to flash the .pit file alone and that worked and got me back to where i was stuck in the Samsung logo loop and no ROM would be flashed through Odin BUT the (P1000JPJM3) but it still will not boot! and funny enough i took it to sammy's repair shop and they told me to come pick it up in a few hours but they told me that they failed to repair it and they would need to keep it till tomorrow, but they guy was not that optimistic about getting it repaired and to make things worse i couldn't get unrooted so there is a good chance that there will be no warranty... does this mean that i bricked it for good? please help me.
Hi everyone I have readed all the threads regarding flashing/hacking/fixing
first of all i have try to do this odin and with the the flash but found out it wasn't that eazy first
when i went to get my tab into downloading screen the computer can't find the dumb tab thats connected.
if you have that problem what i did.
first i disconnected the usb fromthe tab and click on setting/applications/development/ and click the usb debugging check mark it will not let you check it if you have the usb plug in (Im dumb so i found out the hard way) then installed the samsung kies ( i don't knwo if that helped or not but i just did everything that i could find to try to get this to work which was to connect the tab to the computer when the tab is on downloading mode)
now i started odin3 and it show that the yellow box showing it was connected.
started the with the normal p1 hidden pit /gt-p100/modem p1000
i was thinking yes i'm on my way but hold on it freezed on me. and just stop with a error and odin tells me it fail. but on my tab it show that its at 50%
so what i do i hard reset my tab and now the next problem
the famuse 3 icon the phone/ <!>/ computer Icon
i was oh ****. so what i did form that screen i turn on my odin and it show its still connected. so what i did was try to do the same thing again but nothing just error.
so the next thing i did was open odin and just run modem.bin file which is the modem_beni9000 file and with that i was about to get a splash screen the Samsung Tab ... and nothing else. well from there i figure ill try to finish the process. when i got the samsung tab screen i was able to get into the download screen again with power + down volum and i'm in the download screen and still the tab is connected to the computer and the odin still reconize that its connected so i ran the P1000XXJK5 and bam... i was able to get my tab back and was able to get the phone icon and working. i might be lucky that it work but if your in the same problem as what i was in i hope it help. i no expect after the 2 days of reading and trying stuff i'm no noob now still call myself noob PM if u need to ask quest ill be happy to help as much as possible ^^
hey guys is will need some help with this device im not kind of a noobie on this kind of things bcs i been working with several phones, like the veteran xperia10, galaxy ace, motoroi2, etc etc. but never with a tablet
here is what it happens a friend ask me if i can upgrade his sgt-p1010 to a newer version, honeycomb or maybe ics, i´ve read a lot of posts regarding this on how to upgrade it trough odin everything was fine until the reboot of the device, bcs by my mistake i flash a rom of the 7.7" tab and this one is a 7" only now the tab is not turning on, odin is not recognizing it, either samsung kies or the pc. buttons are not responding it wont charge and cant enter to download mode.
I REALLY NEED HELP FROM U GUYS, HOPE U CAN HELP ME
ps. srry for my english :laugh:
This kind of thing can result in the inability to boot which can only be repaired by the use of specific hardware, i.e. this could be a "hard brick". Then again, maybe it can be restored to working order by flashing it again (a "soft brick"). So the very first thing you need to know is, can it get to download mode?
Turn it off, if it's switched on, and charge it for a couple of hours,say four hours. Use the original charger connected to mains. It doesn't matter if it shows anything, or nothing on the screen, let it charge. This is to make sure flashing it won't fail because it doesn't hold a charge.
Now connect it to the PC with the original USB cable. Then after making sure it's switched off, switch it on by pressing the On/Off button, while simultaneously the Volume UP switch. Press them both at the same time, and keep them pressed! If you're lucky you'll get the yellow graphic with the download text. A phone symbol, an !, and a PC symbol is fine too. Even if it doesn't show anything, you may be in download mode, so install the right drivers, and hopefully Odin or Heimdall will recognise is, and will allow you to flash the right ROM.
well i already let it charge for all night long and nothing happens after i perfomed the flashing the screen was totally in black but it doesnt shoes anything i mean the tab was turned on, then apparently batterie dies and after that is not charging. already tried with the heimdall thing but it says that device is not connected.
I think that this is going to be a HARD BRICK
so do u thhink there is another way to solve it?????
or it will be necessary the JTAG stuff???? bcs i dont want to try that it seems that is very difficult to me bcs i dont know nothing about hardware jejejeje
You have installed the Heimdall driver? It's called zadig.exe. Then you have to go to download mode and connect the Tab to the PC with the USB cable. Then Heimdall hopefully will detect the Tab.
If there's no way software will revive the Tab, it's hard bricked and will need hardware to get it working again. There's this guy mobiletechvideos.com who will repair any kind of brick. Basically he uses the JTAG on the board of the Tab and a special box to flash the right ROM to the Tab, even when it's dead. Some here have tried the service, and they say he's quite reliable. Another way is to modify your Tab with Adam Outler's Unbrickable Mod. It's brilliant, you can't soft brick your Tab after that, but it involves soldering very small components on the board of the Tab. The mobiletechvideos guy can do it for you I believe.
Well, I guess you just got a hardbrick .
The only way to fix this problem is go to SAMSUNG SERVICE CENTER.
Sent from my GT-P1000 using xda app-developers app
I too have a focus that is stuck in a loop at the Samsung logo. I bought it like that thinking I might be able to resurrect it as another toy. I have had lots of experience with Samsung, HTC and Sony droid phones, this would be the first WP.
It is a I917R on Rogers, there is no hardware revision under battery. I am assuming it is V1.3 as I have only seen software for the that version posted. I do not know how the phone got to its present state. They just said it happened during normal use?
I can get to both download mode and factory reset. I have flashed the stock rogers files without errors, but I never get the screen connecting to pc. The phone just restarts after successfully flashing, only to reboot continuously. I have been able to install MAGLDR and flashed every v1.3 ROM i could download. All without errors, just the same outcome they all just keep displaying Samung logo and then reboot. Only thing I noticed is that when I flash MAGLDR and custom ROMs it takes the phone longer to reboot.
I never get the connect to pc if I hold camera and power, nor do I ever get that screen when I flash a ROM.
Not sure if situation is similar... I am puzzled?
Your situation is very similar with other folks' here, unfortunately. It's not clear what causes it and there's no solution as of yet. For some, re-flashing worked. For others, a new battery. Most are stuck on loop...
When you connect the phone to USB when in download mode, what do you get?
When I boot to download mode I can flash Rom with WP7. I get to the yellow triangle download mode and flashes ok, no errors. Just noticed that it never goes to connect to pc mode.
Same with when I format, no connect to pc mode.
Nothing I try seems to help.
blackangel21 said:
When I boot to download mode I can flash Rom with WP7. I get to the yellow triangle download mode and flashes ok, no errors. Just noticed that it never goes to connect to pc mode.
Same with when I format, no connect to pc mode.
Nothing I try seems to help.
Click to expand...
Click to collapse
I see. What messages do you get when you connect the phone to the PC via USB, in either mode?
No messages, just shows up as Samsung USB composite device, Samsung mobile modem and Samsung mobile modem diagnostic serial port in download mode.
In magldr it shows up add Microsoft USB sync.
The only thing I forgot to mention was that when I flash with WP7 it finished without error in 90 seconds, but on the phone it says it will take 10 minutes.
Not sure what more I can add...
You could try different downloaders. Please see this thread for 7.41 downloader, maybe that helps?
Tried both, same outcome... No errors, just keeps rebooting... No Connect to PC message.
Im having the same problem. And i can see many other people who are having the same issue also. So i think its time to dump those phones, not worth a penny. The one i have in here was actually working, i followed all the directions in order to flash it. And still the phone got stuck into that bootloop. Its ridiculous from what i can see. I think ive read once you put that SDmini in it the phone will use it for the OS. But the one i had was working actually without it, i could turn it off as many times as i wanted and nothing happened. But if i tried a factory reset data would stay and diagnosis mode wasnt working. So i decided to flash it. Big, huge mistake! Hope you have better luck than i did. Because im dumping this one....
Same problem here, ive checked a couple of threads and no solution so far
Initially i was able to get into Recovery Mode and was trap in Boot Loop but when i Flash a Rom from Dorky's with ODin 3 Even Boot Loop Goes away nothing appears except Black screen but can get into Download Mode
so tried another time with Odin 1.875 with some other Rom Odin first detected it and the when process Starts it gives error failed i restart process and nothing happens i took off the battery and replaced it and tried to get into Download Mode but nothing Happens:crying::crying::crying:
Galaxy Y s5360
Please help, u can help!!
xhizors111 said:
Initially i was able to get into Recovery Mode and was trap in Boot Loop but when i Flash a Rom from Dorky's with ODin 3 Even Boot Loop Goes away nothing appears except Black screen but can get into Download Mode
so tried another time with Odin 1.875 with some other Rom Odin first detected it and the when process Starts it gives error failed i restart process and nothing happens i took off the battery and replaced it and tried to get into Download Mode but nothing Happens:crying::crying::crying:
Galaxy Y s5360
Please help, u can help!!
Click to expand...
Click to collapse
Start calm.
All you need is a cool mind now.
Search for the USB JIGGS available on xda and see if someone from your area has it. You can then take help from that person. If not then just go to service center, tell them that it stuck like this while doing software update and act like you no nothing about rooting our flashing. That will do.
A Hero Can Be Anyone. GENERAL HELP THREAD
Is is still repairable
Bruce Wayne said:
Start calm.
All you need is a cool mind now.
Search for the USB JIGGS available on xda and see if someone from your area has it. You can then take help from that person. If not then just go to service center, tell them that it stuck like this while doing software update and act like you no nothing about rooting our flashing. That will do.
A Hero Can Be Anyone. GENERAL HELP THREAD
Click to expand...
Click to collapse
I am not thinking to use a jigg as even after i get into Download mode incase after jigg i would definately make situation more worse
is it repairable, when i connect it with Cable i can see it is searching for drivers so its not completely gone i guess,
will service center guys will able to repair it??
xhizors111 said:
I am not thinking to use a jigg as even after i get into Download mode incase after jigg i would definately make situation more worse
is it repairable, when i connect it with Cable i can see it is searching for drivers so its not completely gone i guess,
will service center guys will able to repair it??
Click to expand...
Click to collapse
Yes, offcouse.
Just let them be unaware of you knowing about root/cwm etc. just act dumb. If they get to know your warranty is already void, they will charge you money for repairing it.
Follow what bruce says..
Tell them u got an update in kies nd this happened
** rooting is new for me,
nd i am a noob to root....**
They said Board is damaged
They are saying board is damaged!
price to repair it is more than its second hand value in market
i took it from their and brought it home
i remember before giving them when i connect usb cable to it unknown device found is detected but now its not even showing that
i am developer guy so not a completely noob
i want to repair it not to replace its body parts
can someone help
please!
Please anyone!!
or do refer any book!
xhizors111 said:
They are saying board is damaged!
price to repair it is more than its second hand value in market
i took it from their and brought it home
i remember before giving them when i connect usb cable to it unknown device found is detected but now its not even showing that
i am developer guy so not a completely noob
i want to repair it not to replace its body parts
can someone help
please!
Click to expand...
Click to collapse
The last 'n' only hope left is this:-
Install ur phone specific driver on pc.
1. Take out battery, sim & sd card.
2. Open odin.exe on pc.
3. After this, connect the phone via USB cable to PC(yes! without battery,sim & sd card)
4. Press the download mode combo keys.
5. While keep pressing all those keys, insert the battery now.
6. Now, odin should detect ur phone so that u may get it updated with stock firmware.
And if this also doesn't work, then bro u might have lost it at all
Sent Via XDA™ Premium