Hello, im SO desperate...
I rooted my Droid X a while ago, and just decided to flash a custom ROM yesterday.
I tried ApeX; worked great. Buy it reminded me of my rooted CM'd G1, so i wanted something else. I decided to try a bunch of ROMs so i could make an educated desition.
Needless to say Bootstrapper worked great.
I tried Fission, then, DarkSlide; GummyJar, Liberty 1.5 & finally, Tranquility.
I must say, the latter one is a bit too buggy for me.. For one thing, lock screen.. doesnt shoe the lock button, so you kinda just have to trust it'll unlock when you swipe your finger, and in most cases, it does... But it aint what i was looking for.
Ive decided i liked Liberty, for its easy to use GUI for customization.
Heres where the problem starts...
My device will boot into Tranquility just fine, but if i try to run recovery thru bootstrapper... uh-uh. Nothing happens, I guet stuck in the Tranquility boot screen (tranquility replaced the default M screen, as well as the animation boot, just like liberty)....
I tried using clockworkmod rom manager and i got the EXACT same results.
I tried formatting my sd card; nuttin... i read somewhere, someone said that "charging the battery to a full 100% worked for him"... it doesnt make any sense, but ive tried it.
I dont know what to do... i mean, my phone works fine, but i dont wanna get stuck with TRANQUILITY!
ive also tried unrooting and rerooting... uninstalling and reinstalling both bootstrapper and clockwork...
If i shut down and boot with the home+power pressed buttons, the phone WILL enter its recovery mode, ive already tried a "factory reset", and all i get is... THE SAME THING! Itll reset my Tranquility as if it were the first time i flashed it.
How can i flash another rom?
I read something about an SPL, but ive no idea what that is nor what to do with it.
Id appreciate your help...
Paul Suquet
First of all it is an SBF, and will get to that in a second, first try booting while holding just the volume down button with the power button. If that does not work, you may want to SBF. This is a process that erases all the data and system files and takes you back to how the phone was when it came out of the box, or 100% stock. After doing this you could root again and then install liberty. If you want a guide on how to SBF, then just Google it. There are many guides available
There is a thread here called getting into clockwork mod the hard way. You could try it before doing an sbf.
Sent from my DROIDX using XDA App
try turning ur phone off, plug it into ur charger let it do the charging animation and then turn it on, it should boot into recovery
Ok people, [SOLVED]
Good news people, i successfully recovered via Verizon's SPL.
Allow me to recap; i own a Mexican Droid X, known as Motoroi X. I rooted via one click root, and installed Fission ROM. Then i wanted to try ApeX, after that, i tried GummyJar, then Liberty, then DarkSlide, and finally Tranquility. I don't know if i did something wrong, of if this is a problem Tranquility has, but after Tranquility, bootstrapper woudn't boot to recovery... so, i wasnt able to switch roms. Tranquility booted just fine, but if i tried to boot to recovery (be it via Bootstrapper, or via ClockworkROM), i got stuck in the "tranquiliy boot screen" (not even making it into boot animation), so , i had to take the battery off, and boot regularly... Trouble is, I didnt lile Tranquilty (all my respect for all dva's but, Liberty 1.5 was my choice, and it is at the moment). I liked the easy customization it has. One of my friends decided on ApeX (he liked the idea of having a bit of Blur).
SO, what troubled me was:
(1) My phone aint from verizon. I live in Mexico City, and my carrier is called IUSACELL... my phone actually had a totally different version on it when i first got it. Ill give out the version it had from factory, to trigger search results towards this page; hence help the multiple people in mexico city who bought their Droid X device via this carrier... my Sistem Version was:
Version.3.0.15.MB810.Iusacell.en.MX
Ive attached a screenshot of what my "About Phone" looked like from stock.
Cant attach anything, due to being quite new to the forum, sorry about that.
So anyway, I, and one of my best friends (with the same phone and carrier... allow me to say, that in mexico, this phone is not commercially known as a DROID X, its called Motoroi X, buy as you can see by the version MB810, it is the exact same hardware you verizon users know).
Let me say that, my phone was able to keep all my carrier config (that is, PRL, VPNs and such). So, to all other Iusacell Motoroi X users; ROOT YOUR PHONE; AND RUN ANY ROM YOU LIKE!
(2) I heard so much about SPL, but no one could tell me what the heck that was... SO here it is, plain english; its just like doing a firmware update; or, like updating your bios... Let me call it "hardware formatting"... Just a way to get your phone TOTALLY back to stock... Now, this SPL i found, was for Verizons stock, (which had a lot more crap than Iusacell did...), but hell, it saved my @$$. Youll need an Ubuntu Live CD (i use Ubuntu as my daily OS, so... no need to do that), the SPL per se, your phone, and a micro usb cable (no, not a mini USB, we all know motorola did a trick on us and used this micro USB instead of the common mini usb... i suppose they saved some space).
Here are the complete instructions: (remember this will flash your phone, so, be sure to backup at least all the contents of your SD, and; even if there is a slight chance, remember that any of this thing COULD potentially brick your phone, i'm willing to help all i can; anyone out there, but dont hold me responsible, this worked GREAT for me, and it MIGHT not work for you).
Please note that most of these instructions are not authored by myself, i just made a few adjustments to thm and i wanted to make them publicly available to those out there who are in the same ordeal i was:
1: Download the Ubuntu image. It's an .iso file - this means it can be burned onto a cd/dvd. Do so.
2: Once the burn is complete, reboot your computer, set your bios to boot from cd/dvd if you have to.
3: Ubuntu's Menu will appear, select "Try" to boot into the OS without altering your current setup.
4: Download the .sbf_flash utility and the proper .sbf file (note that a file that starts with a period, means to linux, that it is a hidden file. The sbf_flash I got, dont remember where i got it from but it weighs exactly 24KBs. And the .sbf file i found is called "VRZ_MB810=_2.3.34_1FF_01.sbf" weighting 445,393KBs. Dont you dare change the name of these; as Linux doesn't recognise spaces as a character, so, if you changed all the underscores to spaces, Linux' console would not be able to "see" it. If you can't find it, post a reply in this forum, ill see the way of getting it to you.
5: Flash the image onto your phone:
Turn on hard recovery mode; turn phone off; press (and keep pressing): CAMERA + VOLUME DOWN + POWER. Until it comes on. You may have to release all three, and press again power (usually the screen is "blocked").
Now youre in hard recovery mode, and the phone will recognize the computer via USB; so... CONNECT YOUR PHONE VIA USB, duh!
Place the .sbf file to a directory (e.g. Documents)
Place the sbf_flash file into the same directory
Open up a terminal window
Change to the directory that the files are in. [cd] is the command you use; so if in Documents, type [cd Documents].
Ubuntu is caps sensitive, so you need to type the capital "D". If you type "ls" (the equivalent of typing "dir" on Windows Command, or DOS) it lists all the files in the current directory you're in, so type [ls], if you see the files, you're golden.
Type [chmod +x sbf_flash] (ignore brackets) – this command makes sbf_flash an executable. If you've been rooting your phone with ADB Tools you've seen this command before.
Type [sudo ./sbf_flash [name of sbf file, starts with 'VRZ_']] (once again ignore the brackets) – this command runs the sbf_flash file. 'sudo' is the linux-y way of 'running as administrator' in Windows.
It will prompt you for your password - enter it (if your in a Live CD; password is most likely "admin", with no quotes)
Your Ubuntu machine will hard format your phone. Youre probably used to seeing your phone itself perform the installation of a ROM, this is similar. But it aint your phone directly doing it; its Ubuntu... Glorious, faithful ubuntu.
Your phone will reboot, and youll be in a Verizon Stock Rom. You WONT be in the version i described before (but that version was lost since your first Rom...) Iusacell Mexico will work flawlessly... youll still have your telephone line working, and your data plan (if applies). All you have to do now, is run bootstrapper again (this time itll work), your phone is most likely still rooted. If its not, run one click root again; and run your favorite Rom.
Ive tried all roms and decided to keep Liberty 1.5, only downside ive found is; a) camera works, but stock software seems a bit buggy, and b) NO HDMI port. My friend kept ApeX, there IS an HDMI port on ApeX, but as far as I know, youll need to install Stock (Blurry) gallery.
It is a shame HDMI can only be used for picture and video taken from the phone, viewing... I trust sooner or later, there'll be a rom (or a paid app...) able to exploit the HDMI capabilities of the Droid X.
Forum admin: is it ok to publicly plug my twitter account for spanish speaking X users to follow me if they wish to? (Sorry for asking, violated one forums code before, dont want to do it again)
suquet.paul said:
Good news people, i successfully recovered via Verizon's SPL.
Click to expand...
Click to collapse
There, i got the screenshot attached.
Great to hear its working
Related
***********Don't follow this method**************
THIS is what you want to do. This thread is an older method.
Do this at your own risk!!!....I'm by no means an expert on this. In fact it's the first time I have done this. There are probably tons of guide to doing this on the T-Mobile version but I made this to help people with the Canadian Rogers G1. So it only applies to that specific phone. This is also expecting you be using Windows (I use XP but Vista will work but I don't know where the command prompt is found....google it if it isn't in the usual spot). Also the commands would be the same using a Mac but yet again I don't know what or where the equivalent of windows command prompt would be found on a Mac.
First off you need the Android SDK which you can get from here (http://developer.android.com/sdk/1.5_r2/index.html).
Unzip the folder inside the .zip file to C:\Android so the final resulting file structure will look like C:\Android\android-sdk-windows-1.5_r2\
Now do the steps 2 and 3 found here http://developer.android.com/guide/developing/device.html
I have cut and pasted these steps here but if you are using a mac you may need to refer to the link. Actually refer to it anyways in case I missed something.
**************** Steps 2 and 3 *********************
Turn on "USB Debugging" on your device.
On the device, go to the home screen, press MENU, select Applications > Development, then enable USB debugging.
Setup your system to detect your device.
If you're developing on 32-bit Windows, you need to install the 32-bit USB driver for adb. The USB driver is included in the SDK package. To install it, follow these steps:
1.Connect your Android device via USB. When the Found New Hardware Wizard appears, you'll be asked if you'd like Windows Update to search for software. Select No, not this time and click Next.
2.Select Install from a list or specified location and click Next.
3.Select Search for the best driver in these locations. Browse to the usb_driver/x86 in the SDK package (<sdk>\usb_driver\x86).
4.Click Finish. The system should install the driver files as necessary. Your machine may require a reboot.
********************************************
Plug your USB cord into your phone and plug the USB cord into your computer.
Open a command prompt in windows by going to Start/Run and then type cmd. You should a dos like window open up. Now navigate to the directory C:\Android\android-sdk-windows-1.5_r2\tools
Type “adb devices” to confirm USB Debugging is turned on
Keep the command prompt open for later use
Get fastboot from here (http://www.htc.com/www/support/android/adp.html) and put it in the tools section of the SDK
Get these files http://drop.io/ii4t2ax and put them in the tools section of the SDK. Mount your sd card so you can copy update.zip to the root of your sd card.
Turn off your phone and then press the camera button and the power on button so it loads up to fastboot mode (or whatever it is called..lol). Once it gets to the screen with 3 androids on skateboards on the bottom you should press the “call” button to the farthest left. It should go to another screen that says “FASTBOOT USB”. If it only says “FASTBOOT” then you gotta plug in the USB cable which you should have left plugged in if ya followed the steps properly .
Now in the command prompt you need to type “fastboot boot recovery.img” don't touch your phone tile it gets to a new choice of menus in recovery mode. Once it gets there you should make a nandroid backup. I really urge you to make the backup. Make sure there is space left on your SD card.
So follow the menus and press the button combination to make the back up and once that is done press the other button combination to apply the update.zip file....Do not touch your phone at all....I'll cut and paste what Haykuro's directions were on this part to emphasize the importance of not touching anything....
(LET IT FINISH, DO NOT TOUCH ANYTHING UNTIL YOUR PHONE IS COMPLETELY IDLE. DO NOT TOUCH AFTER FIRST REBOOT (WHEN CHIP APPEARS) UNLESS YOU LIKE A BRICK. )
Mine didn't take very long but if it does still do not touch anything. Please....just don't!
Once it is done press HOME+BACK to reboot the phone out of recovery mode.
Power off your phone and then press the camera button while pressing the power on button to go back to the fastboot menu. Press the “call” button (to the farthest left remember!) so you see it say “FASTBOOT USB”. Once again...If it only says “FASTBOOT” then you gotta plug in the USB cable which you should have left plugged in if ya followed the steps properly .
In the command prompt which you should have left open for convenience you have to type “fastboot flash boot boot.img”
Then type “fastboot flash recovery recovery.img”
Then type “fastboot reboot”
At this point you basically have root but you need to change permissions on a file that need to be on the phone so everything works as your would expect with root
Turn the phone on to be on the operating system.
Type “adb root” in the command prompt to confirm you have root access
Download this file http://www.magicandroidapps.com/su.zip
Unzip the file to the tools folder of the SDK
In the command prompt type “adb remount”
Then type “adb push su /system/bin/su”
Then type “adb shell” and you should get prompted with a # symbol
Type “chown root.shell /system/bin/su” right after the # symbol
Then type “chmod 6755 /system/bin/su”
That should be it...try running the market enabler or SetCPU which you can get here http://forum.xda-developers.com/showthread.php?t=505419
If they work then you have root....currently you CANNOT use any of the custom roms because they were made for T-Mobile versions of the G1. I'm waiting for conversions of these roms myself so have fun waiting just like me. This is the first time I have ever hacked/rooted any phone so be sure to research stuff yourself...I might have things wrong. Who knows....it's all a risk just like I took when I decided to try it without having a step by step guide to read from.
Remember guys...I JUST wrote this so be sure to read it the whole way through before jumping into things. Post problems you run into here so I can fine tune it.
so you managed to root the rogers G1?? great job!! did you figure this out yourself???
no...Haykuro did this. I just took all the available information and put it in order to help others do it. It was all in this thread here http://forum.xda-developers.com/showthread.php?t=522127
Can we get a tutorial of how to flash a new rom now I really want to try out the new hero rom.
there are currently no compatible roms. Cyanogen would like to port his ROMto the rogers version but he doesn't have a rogers phone to test with. Hopefully we would not need to buy him a whole phone just to port his ROM....if he employed a bunch of testers to help him he might be able to do it. I really don't know what he requires to do this though. I'm sure we will get some compatible roms soon. Maybe some of the roms do work....pretty early in the game to know what works and what doesn't. I've personally been having a great time ever since I bought this phone just reading about it, watching things happen and tinkering with things. I can just imagine how Haykuro feels being the one to make this happen. I need a compatible ROM to go further though.
XwXDv8XwX said:
there are currently no compatible roms. Cyanogen would like to port his ROMto the rogers version but he doesn't have a rogers phone to test with. Hopefully we would not need to buy him a whole phone just to port his ROM....if he employed a bunch of testers to help him he might be able to do it. I really don't know what he requires to do this though. I'm sure we will get some compatible roms soon. Maybe some of the roms do work....pretty early in the game to know what works and what doesn't. I've personally been having a great time ever since I bought this phone just reading about it, watching things happen and tinkering with things. I can just imagine how Haykuro feels being the one to make this happen. I need a compatible ROM to go further though.
Click to expand...
Click to collapse
Is Haykuro working with Cyanogen? Man I just want to play with the Rogers Rom. Oh well I guess I'll settle for getting rid of the Rogers crap and being able to buy stuff on the Market finally.
Yep, I made a 3.6 for the Rogers Dream. I haven't actually tested it because I don't have one, but I used Haykuro's tools to build the boot image. Let me know if it works for you guys!
Holy...where is that at? lol
My wife has gotta get her ass home with my phone damnit! lol
http://forum.xda-developers.com/showthread.php?t=518851
lol, I just finished restoring my phone too. Oh well I am downloading your files now cyanogen, here's to hoping I don't brick my phone on my first flash attempt.
Can someone point me to a guide to flash this rom to my phone?
XwXDv8XwX said:
Can someone point me to a guide to flash this rom to my phone?
Click to expand...
Click to collapse
After you have rooted, copy the file to your sdcard as "update.zip", boot into the new recovery mode, wipe your data if you are coming from the stock build, then flash the update! The first boot will take a bit longer than usual. Check my thread for a FAQ.
Just wanted to say "Thank You" I have been following the threads in the background for the better part of a week, and was hesitant to give it a shot as I am not too sharp on dealing with dos boxes. However followed it along and everything went off perfect, grabbed set CPU and installed it and works. So I guess I have root. Not really sure what I can do with root, but will look forward to browsing around and seeing what is cool.
The big thing is I want to be able to flash new roms. So I guess this is the first step in doing that. (already actively flash PPC roms on the Hermes)
Again thanks for everyones work on this.
well here it goes....it'll be the first time I ever flashed a new rom to my phone...at least I know some other people have tested this version of cyan's rom so I feel pretty safe doing this. I would just send it back and pretend I don't know what's wrong with my phone if I did brick it but things seem to be going pretty smooth so far.
I wonder if Cyanogen meant to wipe date first or after I applied the update.zip.....I figure he meant to wipe after I apply the update since the update was on the sdcard so I would not be able to apply an update I wiped off the sdcard. It's taking longer to boot up like he said so hopefully that's a good sign. I did just remember there were a few pics I would have prefered to save...lol....oh well.
XwXDv8XwX said:
I wonder if Cyanogen meant to wipe date first or after I applied the update.zip.....I figure he meant to wipe after I apply the update since the update was on the sdcard so I would not be able to apply an update I wiped off the sdcard. It's taking longer to boot up like he said so hopefully that's a good sign. I did just remember there were a few pics I would have prefered to save...lol....oh well.
Click to expand...
Click to collapse
No, you wipe before the update. Wiping doesn't erase your SD card, only the internal data partition.
Also, my ROM is a "Google" based ROM. You'll have to sacrifice the spiffy HTC dialer and Exchange support, but I include all the other HTC apps.
How's your flash going XwXDv8XwX? I tried, but was stuck on the Rogers screen for more than 10 minutes. I rebooted the phone and tried again using the "adb logcat" command to try and see what my phone is doing but as soon as it restarted I stopped getting stats. Is this like a 20-30 minute setup process perhaps?
This is taking ALOT longer than usual. It's staying at the rogers logo right now....how bad is this?
Hi I've been reading these forums for ages but only just signed up, I'm looking to root my hero (surprise) and complete newb.
Basically current build/software is 3.32.405.1 so 2.1, followed the rooting instructions exactly, then rebooted holding home and power on buttons but it just boots straight into a red triangle with exclamation mark in the middle of it, I can hold power and volume up to get a small menu with apply sdcard: update but tried that after getting frustrated and that said that the file wasn't verified.
how do I get the normal recovery screen because already have a villainrom on the sdcard.
You need to do the root process to get to the care bear, then flash villainrom on the care bear, before rebooting.
That will get you sorted
Well I rooted using universal androot, then used the teminal to input the su (press enter)
flash_image recovery /sdcard/recovery.img (press enter) part of instructions but at no point do I see the care bear :S
I have the same problem as Ejen. The phone is root i have superuser permission i do titanium backup .I put RA-hero-v1.7.0.1 with Better Terminal Emulator. When I turn off phone and press Home&Power I get a picture phone with a triangle. Does anyone have an idea how to solve this?
Yes, this is because stock rom automatically reflashes recovery with the stock one each shutdown iirc.
You need to stop this happening, but I can't remember the command. When you have root using universal androot though, you can stop it happening.
Or maybe it's too early for me. Wait till I've had a coffee or two and I'll revisit this...
Perhaps you can edit /system/etc/install-recovery.sh. A quick look trough /system didn't find anything like a shutdown script so perhaps this file is run by the android environment.
I had this same issue the other night, been searching for a fix, hopefully one appears here soon, thanks Pulser_g2, i was hoping to install your 1.5 Rom
Bloke
Ah seems I'm not the only one well at least I wasn't just being silly then, well tried it multiple times but still seem to have no success even tried the unlockr websites method with no success either.
If anyone knows thanks
Right... Are you on 1.5 or 2.1 just now?
Could someone (preferably the most tech savvy here) if you're on 2.1, try http://forum.xda-developers.com/showthread.php?t=726118 and see if that works.
I'm trying to work out what's going on here...
P
I'm 2.1 and had been using your other guide to root my phone but embarrasingly got stuck at stage 2 whilst trying to set up ADB (my knowledge of cmd is very limited to the point I only know the command tree ), saw the guide on XDA and thought that looks really simple so tried that instead, then tried unlockr method when XDA's didn't work now given up and asked for help
Ejen said:
I'm 2.1 and had been using your other guide to root my phone but embarrasingly got stuck at stage 2 whilst trying to set up ADB (my knowledge of cmd is very limited to the point I only know the command tree ), saw the guide on XDA and thought that looks really simple so tried that instead, then tried unlockr method when XDA's didn't work now given up and asked for help
Click to expand...
Click to collapse
Ok,... So how far did you get on setting up adb http://www.villainrom.co.uk/forum/s...de-Setting-up-ADB-and-how-to-use-it.-(Windows) ?
I had done up to part 4 using ADB, opened up cmd prompt I couldn't seem to push stuff to the SD card and was unsure what I did wrong.
When checking the USB works part 3, I used the link chose part 2, HTC sync users > ADB I couldn't find android_winusb when updating the driver software. I'm probably missing something or being silly now but I don't know
Ejen said:
I had done up to part 4 using ADB, opened up cmd prompt I couldn't seem to push stuff to the SD card and was unsure what I did wrong.
When checking the USB works part 3, I used the link chose part 2, HTC sync users > ADB I couldn't find android_winusb when updating the driver software. I'm probably missing something or being silly now but I don't know
Click to expand...
Click to collapse
Type adb devices, and if you see your phone's serial number, then you don't need to worry about drivers. Remember to "cd" into the correct folder first.
I'll try that but CD did nothing I'm running windows 7 and it sticks on C:\users\username Can't go back
Ejen said:
I'll try that but CD did nothing I'm running windows 7 and it sticks on C:\users\username Can't go back
Click to expand...
Click to collapse
Where have you downloaded your Android SDK too?
for example > "cd c:\SDK\tools"
pulser_g2 said:
Right... Are you on 1.5 or 2.1 just now?
Could someone (preferably the most tech savvy here) if you're on 2.1, try VillainROM Roots 2.1 and see if that works.
I'm trying to work out what's going on here...
P
Click to expand...
Click to collapse
I guess that is already on the phone RA-hero-v1.7.0.1 as you said stock rom automatically reflashes recovery. I suppose that the method VillainROM Roots 2.1contains RA-hero-v1.6.2.img. What will then happen with recovery if i try to do again root with VillainROM Roots 2.1?
When you try that method, you get the phone booted into patched recovery, at which point you take a nandroid backup and flash a custom ROM.
this prevents the recovery being lost. Just try it
I'm not at home and can not install ADB and run runindos.bat. I have on SD card recovery and FroydVillain 1.5. That's why I tried this method.Next week I'll be home and if someone does not fix the problem i will try the method you suggested me.
Can I try to put again recovery with Better Terminal Emulator, maybe recovery was corrupted ....
i went through the same thing!!
Ejen said:
Hi I've been reading these forums for ages but only just signed up, I'm looking to root my hero (surprise) and complete newb.
Basically current build/software is 3.32.405.1 so 2.1, followed the rooting instructions exactly, then rebooted holding home and power on buttons but it just boots straight into a red triangle with exclamation mark in the middle of it, I can hold power and volume up to get a small menu with apply sdcard: update but tried that after getting frustrated and that said that the file wasn't verified.
how do I get the normal recovery screen because already have a villainrom on the sdcard.
Click to expand...
Click to collapse
helloo!! i apologise if i am interupting or butting in whilst your in the middle of other solutions... i just saw the title and jump right in. i went through the exact same thing just 2 weeks ago!! unfortunately for me there was no successful forums or websites at the time... it sounded like a simple problem, with no simple solution.
this may not be what you where looking for, but its a very quick easy method that definately worth a try.
so... am i right in saying you have the official OTA HTC android 2.1 update?? and you now want to get this rooted?? and have you also tried rooting using the two common methods, the "one click root" and the "unrevoked" one? thats wat i did and i kept being stuck at the same red triangle and exclamation mark.
those methods (and countless others) will not work with the official htc hero android 2.1. (as far as i know) what you will need to do is downgrade the phones software. check htc's website and look for the older RUU and using the computer get your hero back to android 1.5. (under no circumstance should you upgrade your 1.5 android to the 2.1 android via HTC's OTA update... its only going the remove the root access!!!! - always reject it)
then continue to root as per the numerous rooting guides. done? now, obviously you will want to flash an android 2.1 rom. if you want to keep to htc's original 2.1, you can search for this in the forums under 'development'. or go ahead and flash the custom roms (villianrom).
thats exactly how i did it. im not entirely sure if this is the info you are after... but reply back and ill be happy to answer any query - big or small. (i should warn you, im no expert - but this forum is filled with the earths most powerful brains - u should have an answer in no time!!)
I have an HTC Hero. I ran the simple root method and got Carebare response.
I too have read numerous threads in the forum here and elsewhere but can't seem to get past the USB section.
adb says no device
I can use HTC Sync to sync data to the phone.
The SDK is installed and I have previously used it to capture screen shots of my device.
If I try to run one of the RUU executables, it fails with a [114: USB Error] (number may be wrong but the message is right.
I can mount the SD card and copy files to/from it.
I am running Windows 7 Home Premium 64bit on a Quad Core AMD CPU.
If I do the Home/Power thing, I get the same red triangle as described in the 1st message of this thread.
Fwiw, I have successfully and repeated loaded ROM's on my previous phone (HTC S621) so I am not a complete newb (but i am newb to Android).
What am I missing? This shouldn't be this hard (at least from what I've seen posted anyway)
Hi there,
I had been umming and arring about rooting and installing a new ROM one of my familys HTC Heroes for some time now and finally after reading lots of "How to's" on lots of different forums I decided to take the plunge and give it a go using the guide on here.
Both my wifes phone and my sons phone are sim unlocked Orange HTC Heros running 2.1-Update 1.
Rooting it was easy. One press of a button and I was there. Its pretty much worked OK and I have sucessfully made three backups of the wifes Hero.
My main query and this is the bit I have not really been able to find much info about despite spending a day trawling through the forums looking for similar queries is this:
Having flashed my recovery image file, the first time I reboot I can get into the recovery mode just fine. From here I can make a backup of the current ROM after which the Hero reboots and goes back into the OS as it should.
If I then shut it down and reboot using the HOME key + POWER option It does not go into the recovery mode. I get the screen with an image of the phone next to a red triangle with an exclamation mark in it.
Using the advice from various forums whilst searching for further advice / hints I have left the phone for up to half an hour but it stays on this screen. The only way to get it out of this screen it to pull the battery.
If I then boot up the phone and reflash the recovery image, I can then get into the recovery mode once again but for ONE BOOT ONLY.
I have tried AmonRA Revcovery v1.7.01. and also the Clockwork Recovery 2.5.0.7 images and both produce the same results. I have tried flashing the images via ROM Manager and also via Android Terminal Emulator
My question is this: Do I have to flash the recovery image EVERY time I want to open the recovery mode or is there something I have missed? At present I have held back from installing a new ROM in case I go past a point of no return where I brick the phone. Neither my wife or son would be too pleased despite my son wanting a better ROM on his.
Apologies for writing "War and Peace" but I wanted to make sure I had covered all I could and hope this is a) not a query already posted elswhere which I have missed b)posted in the right place. Apologies to any forum mods if its not.
Regards
Rhinestone.
hmm look on the unlokr.com or something like that. They use some simple passes and it's the way i did it. the on;y difference is that my phone wasn't blocked on a carrier...
1.there is a program that roots the hero's rom
2.after that i recommend installing clockwork recovery mode (it doesn't need signed zips)
3.if you don't feel safe doing this, i recommend to stop... I know that the 2.1 rom is boring but you can end up with a bricked phone after this...
The official 2.1 update has a script that reflashes the stock recovery every time the phone is shut down.
Hunt about for a modified 2.1 rom, all of them have had that script removed. I'm not a huge fan of sense now, but when I did use it, I found villainrom to be a good 2.1 sense rom.
TheReverend210 said:
The official 2.1 update has a script that reflashes the stock recovery every time the phone is shut down.
Hunt about for a modified 2.1 rom, all of them have had that script removed. I'm not a huge fan of sense now, but when I did use it, I found villainrom to be a good 2.1 sense rom.
Click to expand...
Click to collapse
This, just flash a custom ROM and it will stick.
Hello,
Problem might be with rooting, possible it has not been rooted completely or anything messed up. You can try this for rooting.
http://unrevoked.com/
If you are sure its rooted completely, then check out Superuser apps, if its there, and you are rooted, if not then download terminal emulator and type "su" command, if its doesnt display any error then its rooted.
Other then this,
problem might be with the recovery images you are flashing, download droid explorer its a window application, its has an option of flashing recovery with one click, simply choose recovery image & flash it, clockmod recovery or amonr any of this you can get in xda.
Since you can't see, let me tell you. I was trying to flash to Apex 2.0.0 and I KNEW better than to have both RC3 & RC4 on the SD card, yet I left them there anyway. Needless to say...I flashed the wrong one. Am I embarrased? Yes. Do I feel stupid? Yes I do. Will I KNOW better than to do something yet do it anyway? You can bet the farm I will not. That said, here is what my stupidity has created: The computer (HP 32bit XP SP3) no longer recognizes my phone, nor does my phone recognize my computer. I do not have the PC/WM Sync/Mass Storage Device/Charge Only options. I cannot get Z4mod to root or install CWR. The stock recovery gives me file signature errors on EVERYTHING I have tried, though with the state my phone is in, that may be normal. Can somebody tell me how to SBF back to a workable state? My boyfriend would really like his phone back. (Think he's worried I may mod it, lol). ~E .
Put it in boot loader and then use rsd lite to sbf back to what you want
push camera volume and power at start. When screen flickers let all three go and you should be in factory bootloader. There you can get your puter to recognize through rsd lite
I have done everything possible to my droid x I don't think it can be messed up
HellllOOooOoOo!!
Ok, here goes. First off, I searched. A lot. There is so much conflicting information and opinions out there. I hate to annoy you pros with noob-ness but I have to. Sorry!
Here is the quick version:
Friend gave me an Atrix 4G. He is big on experimenting, rooting, custom ROMs and all that. I am not. At all. I want to use it on t-mobile. I DO get a signal and can text. MMS doesn't work and motoblur wont let me set up an account. This results in no access to email other then Gmail. Basically, I want to bring the phone back to its original (or close as possible) state. Hopefully, that will solve some of my issues.
-Android Version
2.3.4
-Unlocked
-Rooted
-Build Number
olympus_hktw-userdebug 2.3.4 4.5.2A-5_OLH-3110614 test-keys
-Clockwork recovery mod installed (if that matters)
I am not THAT tech savvy but can follow instructions well. I've already been messing around but cant seem to get RSD Lite to actually flash properly. I dont care for customs ROMS, hacking and tinkering. I just want this phone to work as well as possible.
Can anyone give me some personal assistance? Please? Step by step would be great. I'll be refreshing this page often in hopes of responses.
Vul said:
HellllOOooOoOo!!
Ok, here goes. First off, I searched. A lot. There is so much conflicting information and opinions out there. I hate to annoy you pros with noob-ness but I have to. Sorry!
Here is the quick version:
Friend gave me an Atrix 4G. He is big on experimenting, rooting, custom ROMs and all that. I am not. At all. I want to use it on t-mobile. I DO get a signal and can text. MMS doesn't work and motoblur wont let me set up an account. This results in no access to email other then Gmail. Basically, I want to bring the phone back to its original (or close as possible) state. Hopefully, that will solve some of my issues.
-Android Version
2.3.4
-Unlocked
-Rooted
-Build Number
olympus_hktw-userdebug 2.3.4 4.5.2A-5_OLH-3110614 test-keys
-Clockwork recovery mod installed (if that matters)
I am not THAT tech savvy but can follow instructions well. I've already been messing around but cant seem to get RSD Lite to actually flash properly. I dont care for customs ROMS, hacking and tinkering. I just want this phone to work as well as possible.
Can anyone give me some personal assistance? Please? Step by step would be great. I'll be refreshing this page often in hopes of responses.
Click to expand...
Click to collapse
It sounds like you need to set up a proper T-Mobile APN. (you have a T-Mobile SIM card currently installed?)
If you can get on Wifi, try to go the the Play store and download Tweakker or other APN utilities that enter the APN for your based on your carrier.
co.ag.2005 said:
It sounds like you need to set up a proper T-Mobile APN. (you have a T-Mobile SIM card currently installed?)
Click to expand...
Click to collapse
Yes. I have a t-mobile SIM card installed. My concern is what the previous owner may have done and whatever ROM is loaded on this phone. Can I somehow bring it back to stock or get a super stable, close to stock as possible ROM first and then start addressing the quirks I have?
Is this an AT&T branded phone? I'm not sure if getting back to stock is necessary, and if you do get back to stock, you might be SIM locked to AT&T (I could be wrong however). If you want to flash a fresh, stock ROM but still be rooted, SIM unlocked, etc., find a 2.3.6 Fruitcake in this forum or try NottachTrix 4G ROM.
however, I'd wait till others weighed in before doing anything. Honestly, I'd try getting your APN (download Tweakker app and walk through the steps) going now and if that solves your issue, your ROM might be working fine for you... my $0.02
oh, and welcome to XDA!
Vul said:
Yes. I have a t-mobile SIM card installed. My concern is what the previous owner may have done and whatever ROM is loaded on this phone. Can I somehow bring it back to stock or get a super stable, close to stock as possible ROM first and then start addressing the quirks I have?
Click to expand...
Click to collapse
1. Download the fruitcake .zip you want (webtop also, if you want it)
2. Do a full wipe with fastboot (search if you're unsure how to)
3. Boot into recovery and flash the .zip you downloaded from step 1
4. Reboot and you're done
This will put you back to stock. I can't remember if fruitcakes are pre-rooted, but if not you can easily root again.
Alright, now we're getting somewhere.
co.ag
The phone itself says "unlocked" upon startup. I got the network unlock code direct from AT&T because at first the phone wouldn't even recognize my t-mo SIM. Phone is now network unlocked.
Ghost
gonna search now for fruitcake and see what thats all about. Do I need webtop?
Then going to get fastboot. Guess I dont need RSD Lite anymore?
Im doing this because I dont know what the previous owner has done and would like a clean slate. Kind of like changing the oil on a used car you buy, even if the PO says it was done.
Ok so,
I found fastboot with recovery tool and the .exe files within the ZIP dont do anything.
The fruitcake ZIP file I downloaded according to your link, I'm not sure what to do with that. lol
Help?
**am I supposed to be saving these files to the phone itself? If so, where? Internal storage? SD card?
Vul said:
Alright, now we're getting somewhere.
co.ag
The phone itself says "unlocked" upon startup. I got the network unlock code direct from AT&T because at first the phone wouldn't even recognize my t-mo SIM. Phone is now network unlocked.
Ghost
gonna search now for fruitcake and see what thats all about. Do I need webtop?
Then going to get fastboot. Guess I dont need RSD Lite anymore?
Im doing this because I dont know what the previous owner has done and would like a clean slate. Kind of like changing the oil on a used car you buy, even if the PO says it was done.
Click to expand...
Click to collapse
that "unlocked" bit on start up means your bootloader is unlocked, doesn't have anything to do with the SIM card. All this means is that you can flash a ROM since the phone is "unlocked"
Vul said:
Ok so,
I found fastboot with recovery tool and the .exe files within the ZIP dont do anything.
The fruitcake ZIP file I downloaded according to your link, I'm not sure what to do with that. lol
Help?
**am I supposed to be saving these files to the phone itself? If so, where? Internal storage? SD card?
Click to expand...
Click to collapse
the fruitcake .zip goes on your internal sdcard. BUT, before you start doing anything, please go through the stickied threads in this section and read up on how to flash ROMs to your phone. This will include how to wipe your phone using the fastboot commands and how to flash the fruitcake .zip.
start here, read this post
http://forum.xda-developers.com/showthread.php?t=1154600
then follow guides to
"HOW TO INSTALL FRUITCAKES ON 2.3.4 (GREAT SBF/RSD ALTERNATIVE!!!)"
and
"ROMs & Kernels:
FYI:
Before installing any ROM or Kernel I suggest you do the following to help prevent error, boot-loops, etc. Also, it's a good idea to flash a new ROM or Kernel on a fully charged device:
1) Download which ever ROM or Kernel you plan on flashing and have the .zip on your device ready to flash.
2) Backup your apps (not system data), contacts, etc. Also consider making a CWM backup of your device, just in case.
3) Boot into CWM Recovery
4) Wipe Dalvik Cache (under advanced in CWM)
5) Wipe Cache Partition
6) Wipe data/factory reset
6a) If you're using ROM Manager/CWM you will need to reboot the device after step 5, and upon reboot enter fastboot mode and enter the command: "fastboot -w" or "moto-fastboot -w" if you prefer using moto-fastboot. Then type "fastboot reboot" and upon reboot make sure to enter Android Recovery again, so that you can flash the ROM/Kernel.
7) Install .zip from SD Card (choose the .zip you wish to install)
8) If you installing a radio, theme, kernel, etc. on top of a ROM, I would suggest redoing the whole wipe process again between flashes.
9) Reboot the Device
- If you get a boot loop, try entering Android recovery and re-wiping the chace and data, and perhaps try reflashing the ROM/Kernel. Or if you made a CWM backup, you can always restore that."
Vul said:
Ok so,
I found fastboot with recovery tool and the .exe files within the ZIP dont do anything.
The fruitcake ZIP file I downloaded according to your link, I'm not sure what to do with that. lol
Help?
Click to expand...
Click to collapse
Ok, sorry I wasn't that detailed in my other post and assumed you were on your phone (my bad). First things first, read the N00b guide.
1. Anytime you download CWM .zips, put them on the root of your phone's sdcard. You'll need them there in order access them from recovery. ( note: sdcard=internal sd card & sdcard-ext=external sd card for blur ROMS )
2. Fastboot commands are executed from the command line. Open a command prompt and navigate to the directory containing fastboot.exe in order to use it. The Noob guide should have links to all the fastboot commands you'll need.
3. With the Atrix's unlocked BL, holding Volume Down when turning the phone on will bring up a series of bootmodes to choose from. This is how you get into fastboot, recovery, RSD, etc. Navigate through the choices with Volume Down. Select one by pressing Volume Up. You should only ever really need Fastboot and Android Recovery.
4. CWM is used to flash .zips (ROMS, kernels, apps) while in recovery mode. Use romracer's to make things easier on yourself later.
Read through the N00b guide and this will all make perfect sense.
I have no idea what Im doing. I think because this phone has been tampered with so much already, it's making it extra tough to work with.
I managed to install CM7. Its the only ZIP file that actually seemed to take. I still dont understand fastboot , in the sense that I don;t know when Im supposed to see a command prompt. Also, now, CM7 is asking me to upgrade to premium and I have to pay for it. There doesnt seem to be a free way of installing it so that I can sync all my info through my google account. Ugh. Im not cut out for this but Ive been screwing with this literally since 730 this morning.
**CM7 with google apps packet installed. So far, so good. Im happy with this considering its pretty close to stock gingerbread, kinda like my G2. Now, Im hopefully done messing around. Would be nice if they release a solution for the fingerprint scanner or if I can get my gmail to auto sync but at least I can stop obsessing for the time being. Great help guys, thanks so much!!!!