Related
hello
I have a problem in my motorola Atrix, buy it with the company Telcel in Mexico, upgrade to version 2.3.4 with the system 45.0.7.MB860.ORANGE.EN.FR WITH 2.6.32.9 kernel version.
the situation is as follows.
when updating the manual for Atrix of Mexico that is on the next page. is in Spanish.
w w w . jorgevenegas.com/2011/08/actualizar-motorola-atrix-de-telcel-de
unlock the file start-lite.sbf zomgunlock
throw me an error .... could not run
use file-intl-fix and it worked try1.sbf
Unlocked cell correctly
Carry out the installation of the system with the following tutorial
w w w .jorgevenegas.com/2011/08/actualizar-motorola-atrix-de-telcel-de_02
install the new 2.3.4. everything correctly.
when trying to install webtop (weptop.img) threw me the following error
"load_file: could not allocate 805306368 bytes error: can not load webtop.img"
I can not install the webtop
I have updated the system but does not start webtop that I have not installed webtop.img
sorry for my English, but use a translator to help
I hope I can help ..
EN: Are you using the 'moto-fastboot'?
--
SP: Estás usando el 'moto-fastboot', cierto?
So you cant install webtop?
I can help you in spanish...email me and/or gtalk at [email protected]
Sent from my OC'd Motorola™ Atrix®
turl1 said:
EN: Are you using the 'moto-fastboot'?
--
SP: Estás usando el 'moto-fastboot', cierto?
Click to expand...
Click to collapse
hello
yes
Aqui yo lo logre!
w w w. underground . o r g . m x/index.php?topic=27287.msg139955#msg139955
Saludos
Im not have Webtop too T.T
Sorry just wanted to know if they could help me because I am in the same situation, just follow the tutorial and achieve Jorge Venegas French ROM install 2.3.4 and my Atrix works great, the only detail is the WebTop that gives me the TT will be no charge option or any way you could use it and set it again?? thanks
Disculpen solo queria saber si podrian ayudarme dado que estoy en la misma situacion, igual segui el tutorial de Jorge Venegas y logre instalar la ROM francesa 2.3.4 y mi Atrix funciona de maravilla; el unico detalle es con el WEBTOP que no me da la opcion ni carga T.T habra alguna forma de poder usarlo y configurarlo de nuevo ??? gracias
Stop following that guys blog.... lots of mexican atrix users with problems.
I followed guides here at xda and my phone is fully functional.
Sent from my OC'd Motorola™ Atrix®
misho52 said:
Sorry just wanted to know if they could help me because I am in the same situation, just follow the tutorial and achieve Jorge Venegas French ROM install 2.3.4 and my Atrix works great, the only detail is the WebTop that gives me the TT will be no charge option or any way you could use it and set it again?? thanks
Disculpen solo queria saber si podrian ayudarme dado que estoy en la misma situacion, igual segui el tutorial de Jorge Venegas y logre instalar la ROM francesa 2.3.4 y mi Atrix funciona de maravilla; el unico detalle es con el WEBTOP que no me da la opcion ni carga T.T habra alguna forma de poder usarlo y configurarlo de nuevo ??? gracias
Click to expand...
Click to collapse
Flash Joes Webtop. Same I told ianus.
Sent from my OC'd Motorola™ Atrix®
Yep, proceed exactly as found in the dev´s forum (from XDA obviously). I highly recommend the full BELL 2.3.4 Atrix over the leaked Orange France. Been using it from a while and everything is just fine.
Look for Bell Atrix 2.3.4 Gobstopper, from NFHimself. Good luck!
---------- Post added at 08:29 AM ---------- Previous post was at 07:52 AM ----------
Hey, me again! Well bud, if you are interested I wrote a post some time ago about what I mentioned just above, of course those are posts from real dev´s, which I thank a lot! (Credits go for them as always. NFHimselh and Eval, and so on...!) And thought this could be for help for you.
I´ve added, as you´ll realise, some own mods to procedures due to lost capabilities, howewer, after sorting those as directed, you´ll have, as stated, a very very reliable and full-functional Mexican Atrix.
This is the link to the post, cheers! God bless my beloved tequilita, mmmm!!!!
http://forum.xda-developers.com/showpost.php?p=17617098&postcount=150
Niiiceee.
Sent from my OC'd Motorola™ Atrix®
titusxperia10 said:
Yep, proceed exactly as found in the dev´s forum (from XDA obviously). I highly recommend the full BELL 2.3.4 Atrix over the leaked Orange France. Been using it from a while and everything is just fine.
Look for Bell Atrix 2.3.4 Gobstopper, from NFHimself. Good luck!
---------- Post added at 08:29 AM ---------- Previous post was at 07:52 AM ----------
Hey, me again! Well bud, if you are interested I wrote a post some time ago about what I mentioned just above, of course those are posts from real dev´s, which I thank a lot! (Credits go for them as always. NFHimselh and Eval, and so on...!) And thought this could be for help for you.
I´ve added, as you´ll realise, some own mods to procedures due to lost capabilities, howewer, after sorting those as directed, you´ll have, as stated, a very very reliable and full-functional Mexican Atrix.
This is the link to the post, cheers! God bless my beloved tequilita, mmmm!!!!
http://forum.xda-developers.com/showpost.php?p=17617098&postcount=150
Click to expand...
Click to collapse
i used the tutorials in here, used a zip file for flashing to the att 4.5.91 with 2.3.4 , but i get no webtop option in the popup, any ideas?
(entertainment center works fine if i select it)
and i got no errors during flashing the zip file
Any update on this i have the same problem i can install the webtop by moto-fastboot but when i connect the cellphone to the dock it did not show the popup asking me for webtop or multimedia center i have only put as a clock option
Thanks for your help
carlos20h said:
Any update on this i have the same problem i can install the webtop by moto-fastboot but when i connect the cellphone to the dock it did not show the popup asking me for webtop or multimedia center i have only put as a clock option
Thanks for your help
Click to expand...
Click to collapse
i solved this using the first post instrucctions on this link
http://forum.xda-developers.com/showthread.php?t=1144119
Hello, first to ask for pardon for my language, I am Spanish and am using a translator. Queria porfavor to ask if someone me podria to send or to hang the sounds of the xperia x8 since me they all resigned, if serian so nice of the 1.6 and of 2.1. Both of alarm and of notification porfavor, thank you very much!!!!
Download stock rom and exteact it...
Sent from my X8 using XDA App
spanish: Así es, el consejo de dsaklein es lo mejor que puedes hacer. Busca la stock ROM en la sección de Development del foro, extrae el .zip y debes encontrar ahí todos los sonidos que buscas.
english: So yes, dsaklein's advice is the best you can do. Search for the stock ROM in the Development section of the forum, extract the .zip and you must find there all the sounds you want.
mmmm, if you dont have sound,its better if you try to factory reset your phone..
Exactly this where? I am new in the forum yal to be in English me entirely of nothing
Not neither nor which is neither the forum nor which the post where estan the sounds
hello?? help me please
Download stock rom from this forum and inside zip archive sound....
Sent from my XPERIA X8 using XDA App
And go to system media
Sent from my XPERIA X8 using XDA App
I sit it do not deal this where exactly in that forum?
To me to be a Spanish woman I do not understand anything of the forums and the translator does not help me to deal very much ... this where exactly the sounds? In that post? Thank you very much
Download this stock rom....http://www.mediafire.com/?q8ppcqvbrspwhyy
Open it go to system-media-sound and take what you need
Not mde stops to open the unloaded file .. all forms is it 2.1 not? I the one that needed was also that of the 1.6!
Thank you
Could you please use Google translate, because im really cant understand what you trying to say...
---------- Post added at 07:48 PM ---------- Previous post was at 07:44 PM ----------
Here you go another 2.1 rom....
http://www.multiupload.com/D89ZD2ASDX
what I need is the sound of xperia 2.1. and 1.6.
but what I want is to open them because I under a winrar or zip file and I can not open in my pc.
thanks
hello? help me please!!!!!!!!!!!!
Please I need it urgently, my signal damage and do not have it either for Odin, Either would serve me, or firmware or odin
Y511 Firmware
Anfesango said:
Please I need it urgently, my signal damage and do not have it either for Odin, Either would serve me, or firmware or odin
Click to expand...
Click to collapse
I also need his Y511 firmware, right now the only firmware I can find is the China Mobile (this doent work in Colombia because China Mobile doesn´t use WCDMA) or the China Unicom firmware (this works in Clombia), but both are Chinese so they dont have any google application, not even the play store and I tried hard and couldnot install google apps.
You find those Y511 firmware (I can not post links, sorry):
China Mobile does not have WCDMA, only sd-CDMA
En español: Yo he buscado mucho el firmware para el Y511, el único que encuentro es el Chino, que se puede poner en ingles pero no trae nada de Google y me ha sido imposible instalar los productos de Google (Gapps), yo no lo usaría. De los 2 links, el de Cina Unicom es el único que funciona en Colombia. Si lo encuentra avíseme!
huawei y511
Why is there no specific page for this device huawei y511?
y511 firmware flash
noamanahmed said:
Why is there no specific page for this device huawei y511?
Click to expand...
Click to collapse
you try the russian y511-u30... it's very functional... though it might be for dual-sim y511, it functions just as good, if not much better.
i am not able to put the link because i am prevented by the admin to post it... just google "huawei y511-u30 flash firmware"...
The Russian upgrade works
mattm3t said:
you try the russian y511-u30... it's very functional... though it might be for dual-sim y511, it functions just as good, if not much better.
i am not able to put the link because i am prevented by the admin to post it... just google "huawei y511-u30 flash firmware"...
Click to expand...
Click to collapse
Hey you are right, the Russian upgrade works! I went to huaweidevice russia, searched Y511, downloaded the firmware, put it in dload folder in the SD card and used the SD card upgrade that is in the settings of the phone, thats all. Phone upgraded and no more chinese apps!
Camilo
bikebogota said:
Hey you are right, the Russian upgrade works! I went to huaweidevice russia, searched Y511, downloaded the firmware, put it in dload folder in the SD card and used the SD card upgrade that is in the settings of the phone, thats all. Phone upgraded and no more chinese apps!
Camilo
Click to expand...
Click to collapse
congratulations, that's so nice to hear. i want to add some info that you can remove the russian language too if you will root your y511.. only english will remain.
Hy everybody, first of all, I'm in italy so I have a galaxy s5 g900f with ITV csc lollipop version.
I wanna update my s5 with the new official beta firmware but I have read that is Arrived only OTA. I have tried to flash g900f BTU firmware and try to check software update but no update were found, so I ask here and I'm searching for help. Can someone who had updated g900f to the last beta firmware share a backup copy (twrp,rom toolbox) of his system and share it to me? I wanna test it in my own device, please xda help me! I only ask a system dump file or a backup copy, I think it can takes about a minute or two. Thanks a lot for all user who can help me. Keep me updated
WizardDeviZ said:
Hy everybody, first of all, I'm in italy so I have a galaxy s5 g900f with ITV csc lollipop version.
I wanna update my s5 with the new official beta firmware but I have read that is Arrived only OTA. I have tried to flash g900f BTU firmware and try to check software update but no update were found, so I ask here and I'm searching for help. Can someone who had updated g900f to the last beta firmware share a backup copy (twrp,rom toolbox) of his system and share it to me? I wanna test it in my own device, please xda help me! I only ask a system dump file or a backup copy, I think it can takes about a minute or two. Thanks a lot for all user who can help me. Keep me updated
Click to expand...
Click to collapse
For the moment there is no working version of that firmware.
A system dump and a TWRP backup are available but they are of no use for the normal users because they both lack the MM bootloader.
Because of that you can't use them. You can flash the backup but when starting up the phone will enter in a bootloop.
The discussion thread for that ROM is here: http://forum.xda-developers.com/galaxy-s5/general/leaked-marshmallow-6-0-1-beta-firmware-t3312827
The developers thread is here: http://forum.xda-developers.com/galaxy-s5/development/samsung-s5-sm-g900f-6-0-1-official-t3311188
You can post everything in the first one, while the second is only used by developers for exchanging ideas/ways of fix the bootloader problem.
Have a perfect day!
AlexVat said:
For the moment there is no working version of that firmware.
A system dump and a TWRP backup are available but they are of no use for the normal users because they both lack the MM bootloader.
Because of that you can't use them. You can flash the backup but when starting up the phone will enter in a bootloop.
The discussion thread for that ROM is here: http://forum.xda-developers.com/galaxy-s5/general/leaked-marshmallow-6-0-1-beta-firmware-t3312827
The developers thread is here: http://forum.xda-developers.com/galaxy-s5/development/samsung-s5-sm-g900f-6-0-1-official-t3311188
You can post everything in the first one, while the second is only used by developers for exchanging ideas/ways of fix the bootloader problem.
Have a perfect day!
Click to expand...
Click to collapse
Sorry but cause this post is in eng i have some difficult to understand it, why when restoring the twrp backup phone cant? Twrp 3.0 can copy all system file so why cant it copy bootloader? Sorry in a Little noob
WizardDeviZ said:
Sorry but cause this post is in eng i have some difficult to understand it, why when restoring the twrp backup phone cant? Twrp 3.0 can copy all system file so why cant it copy bootloader? Sorry in a Little noob
Click to expand...
Click to collapse
OK, even if it's one of the XDA rules to use only english I will make a small exception just to clarify this.
Il bootloader puo essere archiviato dentro la file zip che si fa ma quando viene archiviato perde le sua firma originale. Fino quando non ha la firma originale non puo essere ripristinato con successo e il telefono va in bootloop. Tutti i sviluppatori provano di fare una firma per la file del bootloader ma nessuno non ha riuscito ancora. Quindi hai ragione quando dici che il backup puo avere anche il bootloader, ma perche questo non ha piu la firma originale non viene riconosciuto dal telefono chi poi va in bootloop perche non lo trova. Spero che ho spiegato bene.
ok, thanks fo the exception i have understand perfectly, have someone try to extract the ota.zip file before installing the update? thanks you a lot.
have a nice day!
:EDIT:
where can i found twrp backup so i can try to fix it? im not able with dump, sorry.
Il backup si trova sul dev thread indicato da me sopra. C'e il system dump originale. Non hanno riuscito di fare save a quello ota.zip
AlexVat said:
Il backup si trova sul dev thread indicato da me sopra. C'e il system dump originale. Non hanno riuscito di fare save a quello ota.zip
Click to expand...
Click to collapse
English remember
*Detection* said:
English remember
Click to expand...
Click to collapse
Yeah, man, I know the rules I just gave our colleague a little help on where to find what he was searching. So, have you managed to get it working in your phone? The devs thread has gone haywire with some saying it worked, others resetting, others downloading firmwares I'm still waiting for a safer and easier version for the moment.
We only can wait geiti94 making a tar or a flashable
I need latest microwear l5 firmware.. I tried contacting microwear through [email protected].. But they don't reply, it has been more than aa month.. No update coming through Fundo Pro app.. Please someone give me the firmware if you can.
Thank you
Issue l5 update
Sadman007 said:
I need latest microwear l5 firmware.. I tried contacting microwear through [email protected].. But they don't reply, it has been more than aa month.. No update coming through Fundo Pro app.. Please someone give me the firmware if you can.
Thank you
Click to expand...
Click to collapse
I have the same problem my watch is stuck in 0.0.4 version
floplop said:
I have the same problem my watch is stuck in 0.0.4 version
Click to expand...
Click to collapse
if I have the firmware file than I could have installed the firmware manually with nrf connect app
floplop said:
I have the same problem my watch is stuck in 0.0.4 version
Click to expand...
Click to collapse
contact me I managed to manually upgrade
did you have the firmware?
andimachrif said:
did you have the firmware?
Click to expand...
Click to collapse
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Hello,
My watch stands in dfu mode after upgrading a firmware that not worked.
Can someone send me a firmware a the way to flash it manually ?
Thanks
Envoyé de mon Pixel 3 XL en utilisant Tapatalk
Sadman007 said:
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Click to expand...
Click to collapse
Can I ask you to submit a firmware file? When updating by Fundo application the smartwatch died.
Could you tell us where to get the firmware file?
---------- Post added at 07:03 PM ---------- Previous post was at 07:00 PM ----------
I think that when we ask for help, it is so that they can provide us with a solution, and not to indicate that they have solved it and not to share the file or the solution, it is not ethical; not in this thread but in everyone. Thank you
Solución al error de actualización del firmware del MicroWear L5
Si te dio error al actualizar el firmware desde el fundo, instala nrf connect ejecuta y busca el dispositivo dfutarg, pulsa en Connect y luego la opción dfu, software packet Zip, busca en tu móvil en la memoria interna la carpeta fundo\frw y verás un archivo fundo.zip y enviar, a esperar y suerte.
jeyviman said:
Si te dio error al actualizar el firmware desde el fundo, instala nrf connect ejecuta y busca el dispositivo dfutarg, pulsa en Connect y luego la opción dfu, software packet Zip, busca en tu móvil en la memoria interna la carpeta fundo\frw y verás un archivo fundo.zip y enviar, a esperar y suerte.
Click to expand...
Click to collapse
Thank you very much.
Worked fine for me.
Sadman007 said:
contact me I managed to manually upgrade
Click to expand...
Click to collapse
Pm sent
Hi, Could soumebody say me where can i found : fundo\frw fundo.zip ?
Hello, I also have a Microwear L5 but with version 0.0.6.
Is there a newer one? if yes can someone help me please?
Thank u in advance.
Newer version
etimarques said:
Hello, I also have a Microwear L5 but with version 0.0.6.
Is there a newer one? if yes can someone help me please?
Thank u in advance.
Click to expand...
Click to collapse
Hi etimarques,
The latest firmware is v0.1.2 now. If you install the newest FunDo Pro app from Google Play, you can look for the newest firmware from this app and install it. It stores in the Fundo.zip file, what is mentioned above.
I don't know, whether in your case the titles in the smart watch for every page appear in English or Chinese. I had v0.0.6 firmware when I've bought it, and that time the titles appeared in English. After upgrading the firmware, they became Chinese. Update only if this is fine for you.
P.S.: If you have the v0.0.6 firmware, and the titles are English, could you upload your firmware? I would prefer those titles in English.
Hello..
Is it possible to have the firmware..
I am facing the same problem..
Thanks in advance..
Hello jest w stanie pomóc mi, mój l5 po aktualizacji umarł. Proszę o podanie jego po kolei mam wgrać oprogramowanie.
Sadman007 said:
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Click to expand...
Click to collapse
can u please send me this file with firmware?
Old firmware
Hi all,
Not sure if i'm too late on this.
When I first got my L5 9-12months ago or so, it came with 0.0.6 and I got about 6weeks of use for the first three charges.
I updated to 0.1.2 (later to 0.1.3) but I can still consistently only get about a week from a charge now.
I highly doubt this is battery related, as it came exactly as I updated -and after a few months of use prior.
Can anyone PM me the original firmware 0.0.6 if they still have it, or a link to where I can find it pls?
I'm seeing a lot of "i have it", so I'm hoping someone still does.
I'd just like to rule the firmware out of the equation.
Thanks all.