Related
So, I can only run my phone at a MAX 1.3 GHZ without it crashing..
How can I run it at 1.26 without it crashing?
I am running Kings Kernel #11CFS
with Virus Sense Rom RC3
Is there some setting I need to chang? or use a different kernel..
why would you want too ? i would imagine that would kill the battery and make the phone very warm ?
Not all CPU's are created equal. If yours is crashing a lot at that frequency, chances are that yours will almost never run stable.
you could try using conservative scaling but it still probably wont be stable. most evo's cannot handle it.
Heat is your enemy. I suggest you try my hardware mod to really crank up the freq.
Overclocking
I just rooted my phone and I downloaded setcpu and I want to overclock it, but the max that i get is 998. And was wondering how can i get it at 1.267GHz. Im new to the android. Can someone please help.
The stock kernel does not allow over clocking, you'll have to try out a kernel from the development section, I recommend the newest Kingz.
Hey... I think this thing makes phone calls too!
1ktmeadows said:
I just rooted my phone and I downloaded setcpu and I want to overclock it, but the max that i get is 998. And was wondering how can i get it at 1.267GHz. Im new to the android. Can someone please help.
Click to expand...
Click to collapse
Download a kernel that supports OC.
I tinkered around with OC'ing a few months ago I could never get it over 10xx without crashing. I just learned to live without setcpu.
I agree with voodoo there's really no benefit, unless you like pulling the battery. I didn't notice any better performance or speed while overclocking.
nukedukem said:
Heat is your enemy. I suggest you try my hardware mod to really crank up the freq.
Click to expand...
Click to collapse
Lol... [op]is there a particular reason why you want it that high? In all honesty there is no benefit to this.
sent from my VooDoo phone...
VOODOOTRIP said:
Lol... [op]is there a particular reason why you want it that high? In all honesty there is no benefit to this.
sent from my VooDoo phone...
Click to expand...
Click to collapse
Indeedj this will cause ecen more battery drainage and additional heat that might damage the phone
Sent from the iPhone Assassin
Mine is running very stable at 1.26Ghz and great battery life. Running BakedSnack 1.8 along with kernel #6. I'm using Overclock Widget instead of SetCpu as SetCpu was causing lagging response on my EVO.
I dont need 1.26 GHZ
I just wanted to Know why my phone wasnt running stable at 1.26 even thoug it said it was capable of doing it..
Hey
nukedukem said:
Heat is your enemy. I suggest you try my hardware mod to really crank up the freq.
Click to expand...
Click to collapse
That looks pretty sweet.. is that real though?? if so what did you do?
ins0dus said:
That looks pretty sweet.. is that real though?? if so what did you do?
Click to expand...
Click to collapse
Love the cooler pic,lol. Might have to steal that one.
Sent from my PC36100 using XDA App
I always wondered when we'll start seeing little fans in our phones, or heat sinks on the back.
bender1077 said:
Click to expand...
Click to collapse
ahahahahaha
I agree with most ppl in that this phone is wicked fast as it is and its just not worth the risk/reward
HTC EVO4G A.K.A. Usain Bolt
Linpack: 34-35 MFLOPS Avg
Quadrant: 1500+
Kernel: King's #6 BFS
FPS2D: 54-55 FPS
ROM: Fresh 3.3
PRI: 1.77
I totally agree that heat is the undesired side effect of the overclocking of the Evo. I had been running mine at 1.152MHz and the noticed a couple of different colored spots on the screen especially during boot up with the bright white splash screen. This was caused by the excess heat from the CPU. I had my screen replaced due to dust under the glass and it is perfect, so no more overclocking for me.
I've been a Nexus S owner for about a month now and it's the best Android phone I've owned so far. If it had an LED notification light and better build quality it would probably be perfect in my book. Anyways, the phone has been extremely fast for me. This is also the first Android phone I've had no interest in rooting because everything works as I want it to stock.
I'm just wondering, is it worth it to root and overclock this phone? Does overclocking really improve the speed that much? Also does Voodoo really give noticeable improvements to the sound and screen?
Arcadia310 said:
I've been a Nexus S owner for about a month now and it's the best Android phone I've owned so far. If it had an LED notification light and better build quality it would probably be perfect in my book. Anyways, the phone has been extremely fast for me. This is also the first Android phone I've had no interest in rooting because everything works as I want it to stock.
I'm just wondering, is it worth it to root and overclock this phone? Does overclocking really improve the speed that much? Also does Voodoo really give noticeable improvements to the sound and screen?
Click to expand...
Click to collapse
yes, yes, and a huge yes to voodoo sound
For me personally, my NS goes up to 1,4Ghz flawlessly and stable and in my (probably subjective) opinion, it did speed up the flicking through my large app drawer list, for example.
Basic things like browsing, texting, opening e-mails etc are pretty much the same, it's barely noticable. Probably because the stock NS is so fast and smooth, the few percents of added speed you gain by overclocking aren't really noticable.
The main thing is the battery life though, it'll drain the battery significantly and so it's up to you whether or not you want to have your phone running a tad faster but not make it through the day, or have it go normal and last the day.
I would always root your phone.
Since you mention the missing backlight notification, if you flash your kernel to say, for example, Netarchy 1.3.12, you can install a small app that's called "BLN". It turns the 4 buttons into a notification light by blinking them on notifications, works perfect.
Also, many people prefer CM7 over the stock Android because of the added functionalities; one more reason to root your phone
I haven't noticed anything about the voodoo sound/display, maybe someone else can pick in here.
Greetz
Trust me in that you will love your phone more if you do. I don't notice the change in speed but voodoo control is a must. You'll be able to adjust the colours on your screen to make your phone POP!
The badass thing about rooting it is that it fixes the notification light problem. All you have to do is flash a kernel with BLN compatibility (Nearly all of them have it) and download the BLN app from the market.
Every time you get a new notification the bottom four buttons flash on and off
Also like Simms said, you also get Voodoo colors which make the screen colors much much better then stock.
I personally don't overclock because like you said the phone is already so damn fast =)
Sent from my Nexus S
I do not overclock my CPU. I don't get any noticeable benefit from it (other than increased Quadrant scores). I tend the opposite way.... I'd rather reduce power for longer battery life, so I undervolt.
Voodoo is worth flashing a custom kernel for, in my opinion. Keep in mind you do not have to root to flash a custom kernel. You only have to unlock the bootloader with one simple command.
I know what you mean about not wanting to even root. I only rooted so I could take screenshots with Shoot Me app. But I use the stock Rom and probably always will
matt2053 said:
I do not overclock my CPU. I don't get any noticeable benefit from it (other than increased Quadrant scores). I tend the opposite way.... I'd rather reduce power for longer battery life, so I undervolt.
Voodoo is worth flashing a custom kernel for, in my opinion. Keep in mind you do not have to root to flash a custom kernel. You only have to unlock the bootloader with one simple command.
Click to expand...
Click to collapse
well, since the bootloader is unlocked, why doesn't root?! =oP
in my opinion, the bad thing in flashing things is because it is addictive, you can't stop anymore. I lived fine with stock for two months, and now i can't stay a week without flash something.
as a matter of fact, you can have voodoo sound in stock kernel, just use the pay app, and if you own a slcd version (like me), you won't need voodoo colors. So the missing and must have is BLN and that was the first reason i root this thing! =o)
and btw, for me, the device is fast enought and i really like to finish the day with my phone still alive, so i don't oc it! =o)
I have noticed that everyone seems to talk about bln but does no one like the no led app? It does well for me...just wondering because I'm new to the S but not android
alnova1 said:
I have noticed that everyone seems to talk about bln but does no one like the no led app? It does well for me...just wondering because I'm new to the S but not android
Click to expand...
Click to collapse
bln is universal (works in scld and samoled screens) and uses A LOT less battery than no led...
frutelaken said:
For me personally, my NS goes up to 1,4Ghz flawlessly and stable and in my (probably subjective) opinion, it did speed up the flicking through my large app drawer list, for example.
Basic things like browsing, texting, opening e-mails etc are pretty much the same, it's barely noticable. Probably because the stock NS is so fast and smooth, the few percents of added speed you gain by overclocking aren't really noticable.
The main thing is the battery life though, it'll drain the battery significantly and so it's up to you whether or not you want to have your phone running a tad faster but not make it through the day, or have it go normal and last the day.
I would always root your phone.
Since you mention the missing backlight notification, if you flash your kernel to say, for example, Netarchy 1.3.12, you can install a small app that's called "BLN". It turns the 4 buttons into a notification light by blinking them on notifications, works perfect.
Also, many people prefer CM7 over the stock Android because of the added functionalities; one more reason to root your phone
I haven't noticed anything about the voodoo sound/display, maybe someone else can pick in here.
Greetz
Click to expand...
Click to collapse
what is your setup to OC to 1.4? Currently I am running the I9020A at 1200 mhz on stock 2.3.4 with netarchy kernel, latest stable version. slightly over volted. however, it still freezes when i play videos with moboplayer. I havent been able to find a stable OC @ 1.4. It will reset and freeze overnight when idle
anyone else's input is welcome
thiagodark said:
bln is universal (works in scld and samoled screens) and uses A LOT less battery than no led...
Click to expand...
Click to collapse
This is truth. No LED does drain the battery quite a bit if you aren't able to dismiss a notification right away. That really hurt me a few times which is why after a few weeks I switched to BLN and haven't looked back.
Mudblood69 said:
what is your setup to OC to 1.4? Currently I am running the I9020A at 1200 mhz on stock 2.3.4 with netarchy kernel, latest stable version. slightly over volted. however, it still freezes when i play videos with moboplayer. I havent been able to find a stable OC @ 1.4. It will reset and freeze overnight when idle
anyone else's input is welcome
Click to expand...
Click to collapse
For my Phone i've never been able to handle 1.4 ever. I run mine at 1.3 and have no issues. Going to 1.4 makes my phone lock up. Every phone is different it seems.
For the record I'm running CM7 7.0.3 and Netarchy BFS 1.3.4.
Sent from my Nexus S using XDA Premium App
I was running Netarchy 1.3.0.2 BFS a few weeks ago. Without doing anything fancy, I could overclock to 1,4 using setCPU and it ran smoothly. I9023, GRI40 and CM7.
But, that kernel version doesn't support BLN so I had to upgrade and I chose the Netarchy 1.3.0.12 CFS and I have to admit (I just tested), I get lock-ups and reboots using 1,4 now.
Many people say it's device related, but I'm convinced the kernel has a lot to do with it as well. I don't know if BFS is the reason or not, it never ran stable on my device (even on stock speeds) and I'm much more satisfied with CFS's stability, but I think that's personal as well
Greetz
1.4 my phone just locks up.
1.2 and 1.3 are about the same for me: random reboots several times a day, with minimal if any noticeable improvement in performance in day to day activities.
Sent from my Nexus S using XDA App
I recently tried overclocking. I found that my phone can barely handle 1.2Ghz. Forget 1.4Ghz. I tried 1.1Ghz and it seemed stable enough but I didn't see any real world benefit from it. Right now I've settled on netarchy 1.3.4 bfs and cyanogen nightlies running at stock clock 1Ghz. Phone is stable, responsive, battery life seems good and voodoo sound is great.
Sent from my Nexus S using XDA Premium App
Trying overclocking now. Phone seems to handle even 1.4 pretty decently. Not noticing any problems. 3393 on Quadrant, nice and peppy. I don't know if the draw on batter life is really worth it. I'll probably drop back down to 1.2 max 400 min. That seems to be a sweet spot.
Running OpenSoju 0.2.6 with the included netarchy kernel.
Hello all!
Just upgraded my wife from the MyTouch 3G Slide to the G2 as she has to have a keyboard and we were on our 5th replacement Slide. So, as she is not the geek that I am, she will not be constantly flashing new ROMs and such. However, I am going to at least install the latest CM and I am looking for kernel suggestions. I already have root, s-off, new hboot, and all that, I'm just waiting for CM7 to finish downloading.
I started using Android with the G1 and constantly updating Radios, as well as ROMs and I currently use a Samsung Vibrant running a TeamWhiskey ROM. It's stable as anything, I like the theme, and CM7 still has some broken stuff on the Vibrant. I'm glad to see that Eugene recently picked up a G2 as he made some bad ass kernels and ROMs for the Vibrant.
So, let's here those kernel recommendations and why you recommend them.
Thanks!
Well am currently using mexdroidmod and their kernel is pretty awesome because its fast and stable. My best advice is to test the diffrent kernel and read through the tread, see what people say about it. All the kernels I have tried are all awesome so you should try them
Sent from my HTC Vision using XDA Premium App
pershoot's kernel. great batt life and OCing
Umaro's kernel has been rock solid for me and has tons of features as well. You can OC all the way to 1.9 Ghz if you so please and it has smartass.
well considering your wife isn't much of a techie.. i say you should go with pershoots kernel because he's always releasing updates and i've never had a problem with any of them. the battery life is excellent if you use the right radio (.17 and .30 have been good to me), but you need to experiment with this though. the phone runs beautifully, just make sure you use superwipe+ to format/wipe so you don't end up with gps issues like many people have had, good luck!
I've run umaro, eugene, pershoot, flippy, pyro, etc etc... aaand I've decided that the provided kernel is pretty much good to go. yeah, there are some little trinkety things with a few of the above kernels that the standard CM7 kernel doesn't support... but honestly, they're worthless to a user who just wants to turn the phone on and have it work.
set her up with the stock kernel @ 245-1017 (I haven't found a reason yet to ditch the ondemand governor, it seems to work best with CM7) and a vanilla gingerbread launcher and she'll be blown away.. that's my $.02
Like said above, CM kernel is great. I've tried most or even all available kernels for CM and finaly decided to stick with original one. It's stable and supports OC (up to 1.5GHz) "out of box", so really, I see no single reason to use the other ones.
Sent from my HTC Vision using XDA App
AllWin said:
Like said above, CM kernel is great. I've tried most or even all available kernels for CM and finaly decided to stick with original one. It's stable and supports OC (up to 1.5GHz) "out of box", so really, I see no single reason to use the other ones.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I'm also thinking about changing the kernal, but only for smartass. Does smartass offer that much of an increase on battery life or anything else? Also, when you OC, do you use SetCPU or just CyanogenMod Settings?
slapshot30 said:
I'm also thinking about changing the kernal, but only for smartass. Does smartass offer that much of an increase on battery life or anything else? Also, when you OC, do you use SetCPU or just CyanogenMod Settings?
Click to expand...
Click to collapse
not at all pooping on any of the guys who swear by smartass/other governors, but the change in battery life is almost unnoticable for me.. the change in performance however can be pretty apparent.
here's my problem with "battery saving" governors:
in order to save battery, these governors are supposed to be more intelligent about which frequencies they select once a task is called... well, that's all well and dandy, but the problem is that the majority of battery-hogging apps (ie streaming music/video, gaming, browsing for a long time, being on the phone, etc) are still going to be battery hogs with or without a fancy governor. the governor isn't capable of making an app that needs a lot of processing power run well at a lower frequency, it can only try to be more selective about which frequencies it uses in order to attempt to save battery life.
additionally, most people use their phones like this: phone is idle (ie screen off), and a call arrives. call ends, phone is back to idle. texting a few people, back to idle. playing a game for 15 minutes, back to idle.
is it really logical to assume that these short bursts of activity are going to benefit at all from a fancy shmancy governor? I doubt it.
I still swear by ondemand or interactive (both work well for me) thru built-in settings if possible (ie cyanogen performance settings). second choice would be setcpu with no profiles (unless you're overclocking heavily, then you should at least have a temp warning profile). at this point, screen-off profiles don't do a damn bit of good, because pretty much every kernel we have for the vision is going to scale down during inactivity.
After the release of Clemsyn's 1.6 GHz Kernel for CM7 based ROMs last night, I immediately switched to it just to see.
But before that I was running Faux123 1.3 GHz.
I'm keeping the Clemsyn kernel for now, simply because I can. My phone can run it with little difficulty thus far and I have a profile to lower the max freq when the CPU gets to a certain temperature. I think I went with about 65 Celsisus.
Before I switched back to CM7 (or rather Neutrino) I was using Wet Dream. I OCed to 1.45 then in attempt to compensate for only half decent webtop performance.
But now I really only do it because I can. Whenever possible, my phone is on the lapdock since I like to HDMI mirror. Battery is not a concern since the lapdock charges the phone and I pretty much always keep the lapdock charger on hand in my bag.
I just thought it would be an interesting subject for the community to discuss as I'm sure it's something that a number of us haven't even thought of and I bet a good number of us fall into the because I can or bragging rights category.
Specific instances of problems OCing helped with in x app or y app might make someone else want to OC whereas someone who doesn't OC might persuade a user like myself to drop it for amazing battery ETC.
Sent from my MB860 using Tapatalk
Why I DO OC.
Right now I have my Atrix OC'ed at 1.45. I'm currently running Alien ROM Build #4.
The CPU has never gotten past ~55ยบ C.
I also have 2 profiles set
1 for Screen off - 800 MHz max.
1 for Battery< 10% -216 MHz max.
This paired with Alien ROM and LP has left me with a buttery smooth experience.
Is the 1.6 OC kernel worth giving a shot? Or does it make the CPU run excessively hot?
EDIT: I didn't really address battery life. I don't notice a huge decrease in battery life, I'm a pretty heavy user- SMS, Web, Video streaming, Facebook, Twitter. Over all OC'ing is definitely worth it to me.
I like to keep mine overclocked because it seems snapier. I use faux 1.45 and its great. Ive noticed clem's likes to make my phone very hot when running video or games and has actually shut my phone down due to heat. If I run clems I like to drop the overclock with setcpu to around 1.3 so it doesnt shut down but seems to get way hotter than faux's. Anything over 1.5 is just going to cause damage to peoples phones and IMO it should not be used so lightly.
I'm OC'd to 1.45ghz I do it for performance and those random times I need to benchmark I want to try 1.5-6 but I can't seem to get them to boot with the ICS mod2 cm7 so till cm9 or neutrino ill just float about with what I have
Sent from my Atrix-4G, stock 2.3.4 (rooted)
No need for 1.6 IMO.
1.3 is plenty for the Atrix. Even Faux 1.0 is fine. Its a phone, not a PC.
Sent from my HTC Inspire 4G using XDA App
I dunno...my webtop configuration may want to take exception to that statement
troycarpenter said:
I dunno...my webtop configuration may want to take exception to that statement
Click to expand...
Click to collapse
+ 1
Sent from my Atrix 4G using Tapatalk
i honestly haven't been able to really tell a difference between 1.0 and 1.3GHz in most of my applications. it definitely doesn't help with system slowdown due to live wallpapers, which is a disappointment.
troycarpenter said:
I dunno...my webtop configuration may want to take exception to that statement
Click to expand...
Click to collapse
Haha, I was in that boat before I switched to HDMI mirroring coupled with VNC or Splashtop (when applicable) from experience, I can tell why Webtop users want OC. You can turn your phone into such a useful computer, and then it falls flat on its face because the inner-workings aren't streamlined. The extra power DOES help in that situation.
But in my actual experience, I haven't seen many realworld benefits past 1.2.
Especially since 1.6 kept eventually shutting down on me after about an hour (assuming there is the same issue as in Clemsyn 1.5, setting your max to a lower frequency than 1.6 won't stick so my temperature profile wouldn't actually work)
My "because I can" mindset is going to leave me stuck on 1.45 though most likely. I keep it maxed at 1.2(or is it 1.1? I'm not using the kernel right now) and then have a profile to ramp it up to 1.45 when it's on the charger (aka my lapdock)
I don't think it is quite the same for Blur based ROMs, but on CM7 1.0 seems perfectly adequate for the Atrix. Even at it's stock speed, it is snappy.
Sent from my MB860 using Tapatalk
I dont overclock. I used to be at 1.3ghz, but I didnt see a big enough difference to keep it. At least on CM7, the Atrix is plenty fast on stock speed.
I overclock, but I wait for thoroughly tested kernels before doing so. Right now I'm with faux's v023r @ 1.3 Ghz. I'll try Clemsyn's after its second or third "redesign" or bugfix.
I stick to optimal battery life kernels rather than performance (faux 123 0.2.3 being the one I'm currently on and most likely will be for the foreseeable future)
Also I can't imagine performance possibly getting any quicker or running programs any faster than they already are on the atrix.
Honestly, I never understood why people oc their phone, especially the Atrix. I mean the phone is already fast being that it is 1Ghz dual core. Plus from what I have seen, the Atrix overheats like crazy with the stock frequency so why would you want to increase that even more, so it explodes? I use my phone to mostly play 3D games and I have never encountered any lag or low fps whenever I play games.
Atrix_Owner said:
Honestly, I never understood why people oc their phone, especially the Atrix. I mean the phone is already fast being that it is 1Ghz dual core. Plus from what I have seen, the Atrix overheats like crazy with the stock frequency so why would you want to increase that even more, so it explodes? I use my phone to mostly play 3D games and I have never encountered any lag or low fps whenever I play games.
Click to expand...
Click to collapse
Quote for truth
The Atrix is plenty fast already. I can understand if you OC a HTC Magic, or a Hero; but there's no real need to do so on the Atrix.
Idk I see a difference on any launcher when I flip through pages and through apps. 1.3 or 1.45. But I def notice the difference in snappyness.
Sent from my MB860 using xda premium
95% of the time I overclock I do it for getting awesome benchmark scores that I can admire. 5% of the time I do it when playing 3D games like Fruit Ninja, It seems a lot smoother to me. But I hardly ever do it because it sucks the battery down so fast, so usually I'm at 1ghz. Also it's just kind of cool to see the the potential the phone has when overclocking.
i used faux's kernel to overclock to 1.3 for a few months but i didnt really see any difference except when i run quadrant or how my phone got hotter than stock when under load. another thing that annoyed me with faux's kernel was constantly losing widgets on reboot. i use two batteries so i reboot pretty often.
I used faux 23r 1.4GHz with setCPU profiles.
Profiles clamped speed to 1ghz at cpu temp of 50degc and 800mhz at 60degc.
Most noticeable difference was in k9 mail, indexing and searching were slightly improved.
I ran it so I would get a short boost if the cpu was cold.
Matthew
Sent from my MB860 using XDA App
Hey
On my old and feeble Hero I had to OC, if I wanted it to run fine, however I never felt the need to OC my Atrix. it has so much juice in it without OC, making it useless to squeeze the battery for the extra 0.2-0.5 GHz. Moreover, since we have no real ICS, our CPU runs freely and waste energy for nothing, so OC it will just make it run ever faster for nothing (In Hebrew there is a saying- running full throttle on neutral ).
I used to run Faux123 1.0Ghz kernel just to UV the device, but since I flashed weekly 6 I use the stock kernel, and it runs great, no overheating, and extremely stable (What cannot be said on UV kernels...)
The only time i oc is when using webtop, that extra speed makes a difference. The rest of the its running at 1ghz and seems plenty
Sent from my MB860 using xda premium
I recently flashed the newest Trinity Kernel on my Nexus 7. I still have the stock ROM. I tried to tweak the CPU settings with ROM Toolbox and the most I can overclock is 1400mhz. Why can't I overclock to 1600? Is it because of the stock ROM? I'm looking into Glazed Jelly Bean as a custom ROM but I'm not sure I want or need to use a custom ROM at this point.
Any suggestions?
Because he dropped the Max. You probably flashed A111 correct? That's a TSVZ meaning it is slightly over clocked and undervolted kernel meant for battery not for performance.
Sent from my Nexus 7 using Xparent White Tapatalk 2
U2Bono269 said:
I recently flashed the newest Trinity Kernel on my Nexus 7. I still have the stock ROM. I tried to tweak the CPU settings with ROM Toolbox and the most I can overclock is 1400mhz. Why can't I overclock to 1600? Is it because of the stock ROM? I'm looking into Glazed Jelly Bean as a custom ROM but I'm not sure I want or need to use a custom ROM at this point.
Any suggestions?
Click to expand...
Click to collapse
try a96, its one of my faves. it has a max of 1700mhz http://goo.gl/mLUCZ
Mildly on topic question ... do you notice any imporvments with overclocking? My first experience with overclocking as on my Hero, and then Galaxy S1, but this N7 just feels so fast i cant see overclocking making it any smoother? lol
thanks
myke66 said:
Mildly on topic question ... do you notice any imporvments with overclocking? My first experience with overclocking as on my Hero, and then Galaxy S1, but this N7 just feels so fast i cant see overclocking making it any smoother? lol
thanks
Click to expand...
Click to collapse
yes. its noticeable, but not like on the older devices.
simms22 said:
yes. its noticeable, but not like on the older devices.
Click to expand...
Click to collapse
Nice, ill have to look into rooting sometime soon.
Ok, I got the a96 and I've flashed it...
Is there a detailed changelog for each version? The a111 said it was a 1600mhz kernel so I don't understand why it was dropped down to 1400. That's where my confusion was.
I did notice some increase in speed at 1400. I was having some stuttering issues with Dead Trigger and Minecraft PE, and they were less with the 1400. I've got it running at 1600 now but I don't know what it will do to the battery or how well it will perform. I'll find out later. I've run through the battery pretty quickly today, but I was tinkering with it A LOT so it's not accurate.
What kind of tweaks could I do using Rom Toolbox that would help me maximize my battery while overclocking to 1.6?
Dont over clock.. i dont even see a need to. I use the ondemand gov which stutters a little but using interactive clears that up. Also using the CFQ IO as it is the stock IO used. Its stock so its gotta be good . Also you should turn F-Sync off that helps quite a bit. Also you could toggle auto hotplug and make it only run two cores while gaming and then turn it back on when finished so that way it will hotplug cores as it sees necessary. You could also up the voltages a little bit, some CPU's dont like the lower voltage and that will cause stuttering and glitching just up them by 25mV and see if it clears if not try another 25mV.
I will try those things, but I really want to play with overclocking and learn what happens. This is my first Android device so I'm experimenting and playing around.
But I have one more question...I've overclocked to 1.5...I found 1.6 to be the same as 1.5. But it seems that after an hour or so, it resets to 1.3. in ROMToolbox. Why is this?
Don't use rom toolbox. Use the Trinity app. It sticks just fine for me. Besides you support the dev to make better kernels.
Sent From My Toro+ via White Tapatalk
simms22 said:
try a96, its one of my faves. it has a max of 1700mhz http://goo.gl/mLUCZ
Click to expand...
Click to collapse
i **** my pants a little when it says "system succesfully corrupted, please freak out now"
MRsf27 said:
i **** my pants a little when it says "system succesfully corrupted, please freak out now"
Click to expand...
Click to collapse
Lol its a joke... its the updater-script you can make it say anything... :laugh:
MRsf27 said:
i **** my pants a little when it says "system succesfully corrupted, please freak out now"
Click to expand...
Click to collapse
ha!
youre not the first
Overclocking past 1.4 Ghz doesn't result in any major usability improvements. I've gone up to 1.7 Ghz and the only thing it does is make my tablet really warm and unstable. All you really need for improving system performance is I/O tweaks to speed up app and page loading, and a little bit of GPU overclocking to help with the transitional effects.
and, to be honest, depending which trinity kernel im using, im using either 1100 or 1150mhz mostly. on a111 im using 1100mhz and on a96 i used 1150mhz. with those speeds everything is still fast but a bit better on battery
Overclocking
If you want a little more information about the the overclocking if you havent already you might want to check out http://forum.xda-developers.com/showthread.php?t=1788759 its the official thread of the trinity kernel for grouper.