I have been on this forum for 3 days going through many fixes for this problem.
NONE of them have worked.
I have been able to get into download mode, and the phone is recognized via com3 in odin.
I have re-flashed it with Eugenes no-brick version, then re-flashed it with tons of different stock and non-stock roms. It gets to various stages but does NOT work.
Any ideas or fixes will be a lifesaver!! Thanks in advance!
If you can still get into download mode and Odin recognizes your phone, flash it with these two files, they work:
http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/
DO NOT check the re-partition checkbox in odin.
why not repartition as long as you put pit file in pit field repartitoin like crazy if you like .
and repartition would be required if you coming from vodoo based kernel or if you ran anyother partiton than rfs .
Thanks for the quick response.
I tried these files again (I have tried them before) both with and without checking the re-partition box.
It boots then says Vibrant Samsung, then crashes. When I turn it back on it again crashes and turns itself off after the initial splash screen.
Any other ideas? It says that I passed in Odin
charge your phone ?
bartek25 said:
charge your phone ?
Click to expand...
Click to collapse
Hahaha ya I wish it was something so simple (maybe it is!) but it isn't that!
download this ! http://forum.xda-developers.com/showthread.php?t=734475
put JFD in to PDA
also downlaod PIT from the same lik i gave you and seriously charge your phone , and when you odin with the files i gave you from the link check rapartition . check phone efs clear and f.reset time and auto reboot .
come back report resoults if not we help more .
also by any chance u didnt play with ROM MANAGER when your wibrant was working and didnt play with repartiton while there right ?
The same crashing loop has happened with the latest advice. I checked Phone efs clear, re-partition, auto-reboot, and f.reset.time.
I used tVhe T959UJFD PDA, and the 512 Pit.
This phone has been plugged in for days I really doubt the battery is dead.
It just is a constant loop of crashing,h whether at te "off battery" logo or the vibrant splash screen.
The ONLY flash that has given me any different results is the "eugene no brick froyo" which takes me to the Android Recovery screen but does not allow me actually select any of the options.
I am starting to think there may be a hardware issue.
To be completely honest, I got this phone from a friend who had bricked it. If I can get it working then I have a galaxy on the cheap.
On the downside I have no idea what he did to brick it, and he is not tech-savvy enough to know himself.
I come from an original G1 and Cliq, so this is a tad different then I am used to.
from my point of view your phone is fried (it happends) or you are not doing something right or someone is more tech savy to help more , did you pull battery out for at least a min and let it sit and try again to boot ...
Ohhh i know whats wrong with the phone ........if your friends gave it to you broken i think good advice is ,download a program that can repartition hard drive from windows like any program that can do format of anydrive from windows i recomend PARAGON PARTITION MANAGER , find your phone while in the program and u need some skills lol for it but find the phone and click delete partiton after you do that click apply 2. after deletion and applaying the actions click on the phones formated drive in the program i recomended you and click submenu wher you will see create partiton click FAT32 apply 3. click again on the disk you created and click format . 4 done , its easy just get to hang of it
Good advice, I will work on this and get back to you later tonight.
Thanks again!
sounds like your friend bricked his phone from ROM MANAGER by creating EXT4 partion in phones memmory not on SD thats why phone cant find a drive to install the system , happend to me by my own mistake but i got it to work so if that help you You have free vibrant so try hard if not u have paper weight toy
if u dont want the phone i buy back from you for 20 bucks so i cant smash it against the wall , always want it to do that
Intim said:
The ONLY flash that has given me any different results is the "eugene no brick froyo" which takes me to the Android Recovery screen but does not allow me actually select any of the options.
Click to expand...
Click to collapse
Just so you know when you get to this point you need to make sure you had ADB set up on your pc and then plug in the phone and do adb reboot and that will boot the phone up, then you can shut it down and go into DL and flash back to stock. if you read the directions from Eugene's no brick it stated you need to do a adb reboot to get it to work, so you can fix it if your getting to the recovery of that flash.
Ok so for the paragon partition manager it does not recognize my phone's harddrive. Unsure how to fix that as it is just a wizard type program.
I have been able to recognize the phone in ADB, although I cannot push any files to the phone (access denied) and have not been able to get SU access either as I am assuming he did not have root when he bricked it.
Any ideas?
you dont need to push any files to the phone with the adb, after you flash the eugene rom and it boots into recovery you just need to load up your adb and type this
adb reboot
thats it, and it should reboot your phone and if it does boot up fine then you can flash back to stock with odin from there.
Did you perchance happen to have installed the Team Whiskey DOW kernel on this phone?
Your symptoms match the symptoms of quite a few others.
http://forum.xda-developers.com/showthread.php?p=11704550&posted=1#post11704550
http://forum.xda-developers.com/showthread.php?p=11680374#post11680374
Related
Sooooo, I may have bricked it. Any help would be appreciated.
So I got my new sd card and figured i would go ahead and partition for future use, if needed for apps2sd, or any other reason. Instead of going through adb I thought I would save myself some time and just do it from Rom Manager.
Now most of you probably already know what happened. Being as the storage on our devices is called "sdcard" I am humbly assuming that it thought I wanted to partition THAT.
Phone wont boot. Tried factory reset, but no surprise there, it did not work. Can get into download mode and reset menu.
Do I need to flash the factory pda, phone and boot files? Will that work? Where can I get it (preferably without the bloatware and root?????)? Do I need a specific version of odin or will the same one i used for my behold 2 be ok?
Sorry if any of this is stupid, I read these forums cause I want to learn as much as possible about my phone, but have limited experience messing with it. Might try Eugene's froyo just for kicks before I go back to factory. But is this the correct route, or should i just get a replacement?
**** update to issue in post 5
Here look at this: http://forum.xda-developers.com/showthread.php?t=743875
ElahC said:
Here look at this: http://forum.xda-developers.com/showthread.php?t=743875
Click to expand...
Click to collapse
Thanks, makes sense. Download mode does not appear to be working now though, think i got into on accident trying to get to recovery mode.
Is it vol down plus power?
How do you know if you are in download mode? Once when i was in what i thought was download mode it said please wait downloading or something, big yellow characters, and when i hit menu in recovery mode it sent me to a screen with a little mailbox and an arrow coming out of it pointing to a little green android.
Which is dl mode?
ok, i got it into dl mode and when i flashed back to stock it still had a blank screen, like the post above says. But then when I tried to flash Eugene's froyo rom it froze on cach.rfs in odin and the screen on the phone went black. So after about an hour i pulled the plug and tried again, same thing, now when i go to flash back to stock, like previously, it does the same thing, freezing when odin gets to cache.rfs
Also the cell phone goes to a screen that has a cell phone and a computer and the link is broken by an exclamation point. cannot get into recovery mode from there but can get back to download mode.
Any help with all of this?
People have been saying that it could be a problem with your Operating System. Mines is Windows 7 64 - bit and when I use Odin it worked but I have experienced what you have; Odin getting stuck on cache.rfs. You can try on a Windows XP based computer to see if you have any success in that. Also you can possibly be using the wrong Odin. Try the Odin from either : http://forum.xda-developers.com/showthread.php?t=734475 , or : http://forum.xda-developers.com/showthread.php?t=740558 . When I was using Odin it would get stuck on cache.rfs but I tried a different Odin and it worked fine again. Really hope this helps and sorry for the late response.
cache.fs problem in odin
ElahC said:
People have been saying that it could be a problem with your Operating System. Mines is Windows 7 64 - bit and when I use Odin it worked but I have experienced what you have; Odin getting stuck on cache.rfs. You can try on a Windows XP based computer to see if you have any success in that. Also you can possibly be using the wrong Odin. Try the Odin from either : http://forum.xda-developers.com/showthread.php?t=734475 , or : http://forum.xda-developers.com/showthread.php?t=740558 . When I was using Odin it would get stuck on cache.rfs but I tried a different Odin and it worked fine again. Really hope this helps and sorry for the late response.
Click to expand...
Click to collapse
I FOUND A SOLUTION TO THE CACHE.RFS PROBLEM!!
http://www.fractionalphones.com/?p=121
Okay, I know there is many post about this, but none seem to answer my question or help me. I have a Vibrant and I've been searching this site along with google to help fix my phone.
I brought it off a friend so warranty won't happen since T-Mobile is being asses. My phone is suck on the black screen after it passes the big S logo. It stays black, and I get 4 lights bright on the buttons. I've reflashed my phone with Odin and it has not worked. I think it correctly as well. Com3 was on, ran the stock Vibrant with Pitt and Tar with PDA one. That had only got my phone off the complete brick that my phone had gone through, when It wouldn't even turn on.
I got the brick off and now I'm stuck with this program. I did have a one click root fix and I was trying to mess around with clock work. To help answer some questions. No, I can not boot into recovery mode. Yes I have cleaned and wipe out cache. Yes I can go into Download mode, but its pointless since odin doesn't do much for me. No I can not go into the phone since the black screen is there and no I can not flash a update file for some reason.
Saying that, I would be grateful for some help and before hand I thank anyone who comes across this even if they don't help, just for taking time to read this and maybe referring someone else to help me or even pointing me in the right direction. Thanks and once again PLZZZZZZZ HELPPPPPPPPPPPPPPPP.
No, odin is not "useless." I'm pretty positive that you applied Odin wrong.
- Check the MD5 on the files you downloaded; verify they are indeed identical.
- Search for development forum for "drivers"... theres a thread posted by TGA_Gunner. Find that thread and download the version respective to your OS (x86 or x64). This one is proven to work.
What exactly happened in Odin?
zephiK said:
No, odin is not "useless." I'm pretty positive that you applied Odin wrong.
- Check the MD5 on the files you downloaded; verify they are indeed identical.
- Search for development forum for "drivers"... theres a thread posted by TGA_Gunner. Find that thread and download the version respective to your OS (x86 or x64). This one is proven to work.
What exactly happened in Odin?
Click to expand...
Click to collapse
Okay. One thing I notice when I try to put my phone into the Android system recovery it says this "
-- Movi_check start .. !!
checksum confirmation need _checksum [1301305579]
MBR _Chksum in header :4.1
MBR checksum : EC0063A432AFDBA2B104C3F0DF52FE3D
MBR Checksum Error
Movinand Checksun Confirmaton Fail
-- movi_checking done!...
# MANUAL MODE #
-- Appling Muti - CSC ...
Installing Muti - CSC "
Another thing, I hit reinstall packages and It says "
-- install from sdcard...
finding update package ...
opening update package ...
E: cant open /sdcard/update.zip
(no such file or directory)
installation aborted.
the drivers I use are the samsung Vibrant drivers for windows 7 64. I know it works because the phone before didn't come up when I didn't use the driver. It always failed and when I install it, than it read my phone. When I connect the phone to the computer, the phone does read it and on odin, it says com 3 in yellow. I than Install pitt and install tar.
The tread you sent me too, I actually went through there before. Both of those drivers didn't work but I found one for windows 7 and it started working for my computer. I could tell it works because the computer actually reads the phone and so does odin. Like I use odin right because it goes through the phone and than says pass at the end. so like WTF lol. I'm pretty sure I'm doing it right tho
Another thing. I used odin a few seconds ago, got the phone to run and it went through the green bar and a blue screen now saying reset came up. My phone than went into androids recovery mode but it started to wipe out data. When doing so, the data said wipe fail. It booted up and now back to the start. Black screen, 4 panels on the bottom lit up and nothing to do.
I'm starting to think it has to do with clockwork I did a partition in it and every since than my phone has been doing this blackscreen with 4 lights.
ANY body ?
help would def be appreciated and even donates if possible. I just need my phone to work
same thing here, know idea, odin says everything passed but still the black screen and four buttons. i also noticed that the sound and tmo splash screen are not in sync. no idea ???? help would be great!!!!!!!!!!! same errors though. also from the partion feature in clockworkmod.
i assume your on windows i don't keep up if there is a working version for mac. Anyway, make sure your update.zip is just named update DO NOT add .zip yourself or the phone for what ever reason sees .zip.zip. I would also go ahead re download your odiin files just to make sure non of them are corrupted for what ever reason.
files all check out good, i can't gain access to the phones sd, i have flashed this thing with every checked build i could find, all with the same result. the master boot record is not adding up.? still have know idea.
have you tried using this.. http://forum.xda-developers.com/showthread.php?t=740558
this work for me and was able to flash to stock..
somebody please help I'm experiencing the same problem as the OP? can somebody point me in the right direction I've been looking for hours
Instead of making us read the entire thread perhaps you could summarize your specific problem.
My initial impression goes like this.
1. Get into download
2. ODIN back to STOCK 2.1
Run odin in admin mode
Use rage against the cage
After getting back to stock Recovery 2e go ahead reroot and flash away
Sent from my SGH-T959 using XDA App
Don't know if this is still an issue, but here's how I fixed it.
http://forum.androidspin.com/showth...yo-That-does-not-Brick!-Downgrading-Is-Fine-)
Downloaded this file knowing it wouldn't work, Had ODIN flash it and got into this weird recovery screen. Just pulled the battery and then flashed back to stock using ODIN.
Helped me out.
Use 512 .pit and True Stock 2.1 from this post
http://forum.xda-developers.com/showthread.php?t=747335
And quit messing with your phone! lol
This is how i fixed mine too, my phone would go through a seemingly normal start up, but the UI would never load and it would stay on a blank screen.
Flash Eugenes373s froyo that doesnt brick. once it brings you to the recovery screen, pull the battery and once again use odin to flash back to stock. the phone should boot up now.
mnm0071980 said:
ANY body ?
help would def be appreciated and even donates if possible. I just need my phone to work
Click to expand...
Click to collapse
Hey i just encountered the same exact problem four days ago except i flash with odin it says pass but im still stuck on a black screen after the s logo my problemwas encountered by tryig flash a kernal. Please tell me that u found a solution
Guys,
I'm in need of help fast.....
Just tried to do the Froyo Upgrade and have hit an almighty problem.
Kies downloaded and went to the next stage 'Upgrade'.
It got about 5% into doing this when the bar stopped moving and the phone switched off.
It's been like this now for over 30mins..... The phone won't power up (it's still connected to the PC).
HELPPPP.
Well you get my sympathy vote! But other then that I think you know yourself what to do. You've been around... Good luck!
Yes..... Bloody Phone, Bloody Kies, Bloody Samsung.
I unplugged the phone in the end and Kies offered to do a Firmware Recovery so I thought why not give it a try.
I went into Download mode, reconnected and Kies started the recovery procedure only for again the bar to stop moving again and it's stopped doing the recovery.
The screen on the phone remained a constant bright Yellow.
I unplugged it again and tried once more... It again stopped about a quarter way into the recovery only this time the screen has turned a constant Green.
Damn.................
The sad thing is that this reminds me so much of my sinclair zx81. 25 years later and we still have to deal with the same problems. Never sure the data gets from point A to point B.
Right.... Now I need to find the address for UK returns.
Don't have my warranty card info with me either so looks like I'll have to Google the returns.... but I'm busy as hell and have an Op to carry out soon.
If anyone comes up with it (or the link) I'll be grateful.
Bugger....
I'm probably teaching the teacher, but are you using the USB lead supplied with the phone? I tried to download some music using another lead and the download stopped halfway.
Sorry if this is too obvious.
Geryatrix said:
I'm probably teaching the teacher, but are you using the USB lead supplied with the phone? I tried to download some music using another lead and the download stopped halfway.
Sorry if this is too obvious.
Click to expand...
Click to collapse
No problem on the 'techer', any advise or assistance is better than nothing.
Yes, I used the cable supplied by Samsung... Nothing seems to sort this out.
As you are thinking of returning it, I conclude you can't get to any recovery/download mode. I don't know if Kies messed up the bootloader or keymappings but there is still the diy jig you might try. Also I have come across many devices in my day that needed repetitive flashing to get to the 100%. It would be bad if this was the case with a 2010 phone but hey its a Samsung.
sargasso said:
As you are thinking of returning it, I conclude you can't get to any recovery/download mode. I don't know if Kies messed up the bootloader or keymappings but there is still the diy jig you might try. Also I have come across many devices in my day that needed repetitive flashing to get to the 100%. It would be bad if this was the case with a 2010 phone but hey its a Samsung.
Click to expand...
Click to collapse
Well I've tried the Firmware Recovery at least a dozen time, each time it starts and stops at different parts.
I nearly got to three-quarters through when the bloody thing hung again.
No problem with the 3 Botton access and getting the Yellow Android Man on screen.. No problems connecting to Kies but as soon as you try the recovery it stops at some point during the process simply saying "An unexpected error has caused firmware upgrade to fail. Do you want to perform firmware recovery now?"....... and that came up whilst doing the firmware recovery.
Doesn't work to flash with odin either?
xExisioNx said:
Doesn't work to flash with odin either?
Click to expand...
Click to collapse
I don't want to use Odin if possible.
With that many different phones and ROMS available I don't want to end up screwing the phone totally.
Well Kies does not have a reputation to be very functional but there are two or three other tools to flash your phone. Although I am not a compulsive flasher, I did use Odin a couple of times. I am not sure exactly why you are having stage fright (referring to your other post on this matter).
Bringing it back to Eclair with a stock rom, using the rom, pit and instructions on http://www.samfirmware.com might help you to restore sanity. Once you are sure you haven't lost your phone you can then retry to use Kies.
The problem for you might be a partialy broken bootloader or incompatibility between the rom mappings and your phones current setup. Flashing a low rom might solve that. (As I understand from heimdall there are high and low packages, the low packages contain a bootloader and are more risky to flash since replacing the bootloader might truly brick your phone)
Also I read about people just flashing a pit file to force a repartition and format of the phone.
Make sure to get it fixed before op, I wouldn't want my doctor to worry about his phone, stiching me up with a pair of siccors stil in me ;D
Don't be scared of Odin. It has recovered my phone a million times
Really, the time and effort of getting a replacement when you can fix it in 2mins with odin in your own home... seems crazy.
You can flash a UK firmware if theres one available, or otherwise flash any firmware and update to UK firmware using kies reg hack, as far as i understand.
sargasso said:
Well Kies does not have a reputation to be very functional but there are two or three other tools to flash your phone. Although I am not a compulsive flasher, I did use Odin a couple of times. I am not sure exactly why you are having stage fright (referring to your other post on this matter).
Bringing it back to Eclair with a stock rom, using the rom, pit and instructions on http://www.samfirmware.com might help you to restore sanity. Once you are sure you haven't lost your phone you can then retry to use Kies.
The problem for you might be a partialy broken bootloader or incompatibility between the rom mappings and your phones current setup. Flashing a low rom might solve that. (As I understand from heimdall there are high and low packages, the low packages contain a bootloader and are more risky to flash since replacing the bootloader might truly brick your phone)
Also I read about people just flashing a pit file to force a repartition and format of the phone.
Make sure to get it fixed before op, I wouldn't want my doctor to worry about his phone, stiching me up with a pair of siccors stil in me ;D
Click to expand...
Click to collapse
Thanks... Need to find out now which is the right PIT to download.
I was on JF3.
God... if only I had more time on my hands.
Okay... got to go guys... Surgery to do.
I'll do the Odin later.
To save me time searching could someone please post below the relevant links I need to get Odin and the procedure....
Cheers.
When you flashed did you remove your sim card? I had that same problem with ki es. Removed the sim card and redid the flash and it continued on it's way.
How this helps.
Sent from my GT-I9000M
Well, if you have an account at samfirmware you can use this link http://www.samfirmware.com/WEBPROTECT-i9000.htm.
Make sure before you do anything to check your phone model is the one I linked to. Making a backup of your efs directory is not possible anymore but normally that should be done also. As a precaution I always remove my external sd card and sim card before flashing and - as you know - have the battery loaded to the max.
It might be an idea to skip jf3 and go to JM8 with a 512 pit and repartition on. This because it seems to be the recommended way of doing things at samfirmware as preparation for the flashing of current froyo releases.
I have never had problems with their way of doing things but opinions differ.
[EDIT]
I downloaded their JF3 package to see if there was a pit file included as there is some discussion what PIT file to use 512 vs 513. The package contains no information on that. It does however contain the word LOW in one of the filenames ...
Beards said:
Okay... got to go guys... Surgery to do.
I'll do the Odin later.
To save me time searching could someone please post below the relevant links I need to get Odin and the procedure....
Cheers.
Click to expand...
Click to collapse
I don't think you need to use a pit, odin should use the information from the phone assuming partitions remain intact. I've flashed a dozen times without one. If you do use one then use 512.
First off, get into recovery try and clear, reset what you can. Remove the sim and external SD as a precaution. Then back to download mode without the phone usb connected.
Grab the JPO firmware > http://www.multiupload.com/MX8XW7BG24
Grab odin 1.3 > http://www.megaupload.com/?d=MADK0XTB
Extract the firmware somewhere, open odin then select JPO_JPO_U_JPP.tar as PDA. Leave everything un-ticked except reboot. Plug the phone into your PC make sure Kies is not running and the battery is charged. In odin you should see a yellow window under ID:COM with a COM port open. If you do hit start, if all goes well a green bar will move across until the phone reboots. Leave it to do its thing at the big S (I usually unplug USB by now, to avoid problems) wait upto 10mins first time. If it hangs try a reset and cache clear and reformat SD. That's all I do, worked with all the firmwares I've downloaded from Samsung's FUD server.
The PIT files are templates for partition information so Odin can manage the size of the internal device partitions. Your standard device should already be on 512 layout, the other PIT's were development hacks. Like I said you shouldn't really need to repartition, but if you do > http://www.multiupload.com/I5WICSBFJ1
Fornowagain said:
I don't think you need to use a pit, odin should use the information from the phone assuming partitions remain intact. I've flashed a dozen times without one. If you do use one then use 512.
First off, get into recovery try and clear, reset what you can. Remove the sim and external SD as a precaution. Then back to download mode without the phone usb connected.
Grab the JPO firmware > http://www.multiupload.com/MX8XW7BG24
Grab odin 1.3 > http://www.megaupload.com/?d=MADK0XTB
Extract the firmware somewhere, open odin then select JPO_JPO_U_JPP.tar as PDA. Leave everything un-ticked except reboot. Plug the phone into your PC make sure Kies is not running and the battery is charged. In odin you should see a yellow window under ID:COM with a COM port open. If you do hit start, if all goes well a green bar will move across until the phone reboots. Leave it to do its thing at the big S (I usually unplug USB by now, to avoid problems) wait upto 10mins first time. If it hangs try a reset and cache clear and reformat SD. That's all I do, worked with all the firmwares I've downloaded from Samsung's FUD server.
The PIT files are templates for partition information so Odin can manage the size of the internal device partitions. Your standard device should already be on 512 layout, the other PIT's were development hacks. Like I said you shouldn't really need to repartition, but if you do > http://www.multiupload.com/I5WICSBFJ1
Click to expand...
Click to collapse
Surgery postponed until tonight so I have some free time.....
Okay, I got Odin 1.3 & JPO Firmware.
I loaded the JPO into Odin (in the PDA section).
Next I put the SGS into Download Mode and connected via USB and sure enough the ID:COM came up yellow with COM7 so I hit Start.
The green line went so far across under KERNAL but just as it was about to finish that box the SGS screen changed to a solid Blue screen and nothing further is happening in Odin.
Any advice??
Odd never seen that before, maybe your root problem. Should have rebooted automatically once the progress bar reached the end assuming you had the reboot option selected. Try a manual reboot, hold the power button down until it restarts. My next step would be the repartition and try again, load the PIT file (as PIT). Same flash procedure as before just using the 512 PIT, reset it all and try again.
ok i recently got a european open to all networks samsung galaxy tab,
now i decided to install a custom rom last night with horrible results, my phone is now stuck on the samsung boot screen and will not load properly,
here are the steps i took that ended me up in this mess,
i installed rom manager from android market,
then installed clockwork mod from inside rom manager, following the exact steps i was given but heres where i think i went wrong,
at some point it asked u back up everything onto an sd card, now i thought i had an sd inside it already but i didnt and thats what i think caused all the trouble,
i backed up all my files anyway onto the internal memory b4 goin into recovery mode, after completely wiping the phone as it saids u shud do, i then proceeded to load the modaco rom that i had installed into the "download" section of my memory and thats where it said the exact following words....
Checking /system...
E: failed to mount /system (invalid argument)
/system may be rfs. checking...
checking /date...
checking /database...
checking /cache...
filesystems need to be converted to ext4.
a backup and restore will now take place.
if anything goes wrong, your backup will be named before-ext4-convert-1297008631. try restoring it incase of error.
E:failed to mount /sdcrard (no such file or directory)
now i've tried restoring it and backing it up but all it repeats is the same thing, i know i messed up but now all i want to know is how can i fix it?
please any help would be much appreciated.
KingofXings said:
ok i recently got a european open to all networks samsung galaxy tab,
now i decided to install a custom rom last night with horrible results, my phone is now stuck on the samsung boot screen and will not load properly,
[..]
now i've tried restoring it and backing it up but all it repeats is the same thing, i know i messed up but now all i want to know is how can i fix it?
please any help would be much appreciated.
Click to expand...
Click to collapse
A brandnew start from scratch with Odin and repartioning with the rom from Rotohammer JMIv1.0 or v2.0 wouldt be my advice. You need the pit-file as well. Can be found on his server.
Heppieboeddah said:
A brandnew start from scratch with Odin and repartioning with the rom from Rotohammer JMIv1.0 or v2.0 wouldt be my advice. You need the pit-file as well. Can be found on his server.
Click to expand...
Click to collapse
ok ive downloaded odin v4.03, downloaded the original samsung firmware version P1000XWJJ3.rar from this website and downloaded the european P1_EUR.pit file also but i'll be honest i'm very new to the android world and dont have a clue what to do from here, how do i repartion the rotohammer rom?
i know i'm gonna sound stupid but if u could please explain it step by step i would be very grateful, thank you
Read the following thread that explains how to flash Rotohammer JMI ROM
http://forum.xda-developers.com/showthread.php?t=939360
Give it a good read and then ask if you have any questions before you start the process again.
KingofXings said:
ok ive downloaded odin v4.03, downloaded the original samsung firmware version P1000XWJJ3.rar from this website and downloaded the european P1_EUR.pit file also but i'll be honest i'm very new to the android world and dont have a clue what to do from here, how do i repartion the rotohammer rom?
i know i'm gonna sound stupid but if u could please explain it step by step i would be very grateful, thank you
Click to expand...
Click to collapse
First extract the P1000XWJJ3.rar. You shouldt be left with a single tar-file?! If so
Well if you have the right files. Start Odin. On the left you see the option 'repartion', tick that box. On the left you see pit. Tick that box and load the pit-file. Tick the box PDA and load the tar.file you extracted.
Start the tablet in download modus and attach it to youre pc. You shouldt see on top left a yellow box. Then just press start in Odin
beware that all on yore tablet will be deleted.
here is a very good guide with pictures.
http://leemn.wordpress.com/2011/01/25/galaxy-tab-flashing-a-new-rom-rotohammer-jme/
Heppieboeddah said:
First extract the P1000XWJJ3.rar. You shouldt be left with a single tar-file?! If so
Well if you have the right files. Start Odin. On the left you see the option 'repartion', tick that box. On the left you see pit. Tick that box and load the pit-file. Tick the box PDA and load the tar.file you extracted.
Start the tablet in download modus and attach it to youre pc. You shouldt see on top left a yellow box. Then just press start in Odin
beware that all on yore tablet will be deleted.
here is a very good guide with pictures.
......ok i followed the steps from above which was to install the Roto JMI Pre-Rooted Firmware v2 it got me pass the boot screen and everything on the tab works except it wont let me make phone calls, everything else works but it picks up no network and when i enter into settings it wont even let me access it?? almost like this is a wifi only rom ive installed??
what do i do from here to get it back to a phone?
Click to expand...
Click to collapse
KingofXings; said:
......ok i followed the steps from above which was to install the Roto JMI Pre-Rooted Firmware v2 it got me pass the boot screen and everything on the tab works except it wont let me make phone calls, everything else works but it picks up no network and when i enter into settings it wont even let me access it?? almost like this is a wifi only rom ive installed??
what do i do from here to get it back to a phone?
Click to expand...
Click to collapse
Ok great. at least you got it working again....
Now you need to flash the baseband-modem that you can find in the download link below. Flash it in Odin. Uncheck repartion. Check 'phone' and load the modemfile you downloaded. Its a tar.file. Leave it as it is. Then press start and the baseband will be installed.
Then you have to set-up the APN from youre telecom-provider and you will be up and running.....
http://forum.xda-developers.com/showpost.php?p=11148313&postcount=129
Heppieboeddah said:
Ok great. at least you got it working again....
Now you need to flash the baseband-modem that you can find in the download link below. Flash it in Odin. Uncheck repartion. Check 'phone' and load the modemfile you downloaded. Its a tar.file. Leave it as it is. Then press start and the baseband will be installed.
Then you have to set-up the APN from youre telecom-provider and you will be up and running.....
ok i downloaded the p100-radio-xxjmf.tar file and followed the instructions u gave but it failed and said this message...
<ID:0/004> set up connection.
<ID:0/004> cant open the serial (COM) port.
OSM All threads completed ( succeeded 0/ failed 1)
i dont understand why it would say that, could it be cos the .tar is xxjmf and the Rom by roto uses jmi? u think u could help? thanks again honestly, you've been a life saver.
Click to expand...
Click to collapse
Ok i just changed the usb ports and it works perfectly, the phone is back online and i didnt even have to fiddle with the apn settings, 3G just works fine,
thank you so much for ur help, i couldnt of done any of this without u, if ur ever around in north west london, u got a drink on me lol
KingofXings said:
Ok i just changed the usb ports and it works perfectly, the phone is back online and i didnt even have to fiddle with the apn settings, 3G just works fine,
thank you so much for ur help, i couldnt of done any of this without u, if ur ever around in north west london, u got a drink on me lol
Click to expand...
Click to collapse
Good to read youre up and running again...
Cheers....
Heppieboeddah said:
Good to read youre up and running again...
Cheers....
Click to expand...
Click to collapse
Hey mate, seems I am in a similar predicament here. Just 2 days back I flashed my Tab to Roto JMI v2 from a stock Asian firmware (DDJK3 I suppose) due to a bad Modaco flash that went really bad. Wiped off my data from god knows what areas. Now I am facing an issue that I am not able to understand or solve.
I was using Titanium Backup to remove a system app without Chuck Norris mode, which meant I had to reboot device and it would delete it OS level and say reboot to system. But once I click on reboot system an Exclamation mark just comes across the screen and NOW I CAN'T BOOT INTO my system. neither to i see the options it was earlier showing me upon Pwer + Vol Key up. The only option left for me is to reflash it using Odin.
Any Ideas mate? Reflashing again and again is not the solution right?
Thanks & Cheers!
sahildeswal said:
Hey mate, seems I am in a similar predicament here. Just 2 days back I flashed my Tab to Roto JMI v2 from a stock Asian firmware (DDJK3 I suppose) due to a bad Modaco flash that went really bad. Wiped off my data from god knows what areas. Now I am facing an issue that I am not able to understand or solve.
I was using Titanium Backup to remove a system app without Chuck Norris mode, which meant I had to reboot device and it would delete it OS level and say reboot to system. But once I click on reboot system an Exclamation mark just comes across the screen and NOW I CAN'T BOOT INTO my system. neither to i see the options it was earlier showing me upon Pwer + Vol Key up. The only option left for me is to reflash it using Odin.
Any Ideas mate? Reflashing again and again is not the solution right?
Thanks & Cheers!
Click to expand...
Click to collapse
Well, first of all. Removing system app ad hoc is not really clever to do. But you cant get into the recovery so you are able to clear cache and do a factory-reset? Volume-up+Power on and holding the volume-upbutton untill you get into the recovery?
If not you have to reflash from scratch with Odin. Use the pit/file and check repartion.
Hi Guys,
Been sent over here as you're the "bees knees" at fixing problems.
I have a Galaxy S which I rooted with Z4root and had the OCL lagfix also.
Was on 2.2 but updated via KIES to 2.2.1 yesterday ( sorry can't remember the last letters).
Phone now sits in boot loop, so tried reflashing stock firmware via Odin3. Phone WILL go into download mode, and WILL accept .PIT files and .TAR files. Odin says successful, but when phone boots, the Galaxy S screen comes up, then recovery screen with the following message
E:Can't mount/dev/block/st110 (invalid argument)
E;copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions,
copy default media content failed.
Trouble is the phone won't boot so can't get to UI menu to format
Is this bricked big time or is it repairable? I presume the default media is the whole workings of the phone?
I have only limited knowledge of these things, and shouldn't have played with it in the first place.
Just need to know if I ought to claim for a new one on my house insurance?
Thanks
Do you have your stock jpy firmware already downloaded?
Follow the directions in the block 2 section.
http://forum.xda-developers.com/showthread.php?t=818556
presume you did not unroot or disable lagfix .
two different file systems is why it broke .
You need 3 button download mode + stock Firmware + odin
Flash stock firmware .
Or take the phone to Samsung and hope repaired under warranty .
http://forum.xda-developers.com/showthread.php?t=723596
http://forum.xda-developers.com/showthread.php?t=810686
http://forum.xda-developers.com/showthread.php?t=939752
jje
This one is easy to fix so don't panic.
Download this ROM and extract (Odin 1.7 and 512.pit are included), then do as follows:
-Start Odin and load 512.pit, don't connect the phone yet.
-Make sure "Re-Partition" is checked, don't change anything else.
-Load PDA.tar.md5 as PDA, MODEM.tar.md5 as PHONE and CSC.tar.md5 as CSC.
-Put your Phone on download mode and connect it, start flashing.
When flashing is done, the phone will enter recovery mode, if it get stuck at the same error, simply do a wipe/factory reset and reboot the phone, the phone shall boot normally then.
Link: http://www.multiupload.com/PZNPALHVDW
Good luck.
electrotune1200 said:
Do you have your stock jpy firmware already downloaded?
Follow the directions in the block 2 section.
http://forum.xda-developers.com/showthread.php?t=818556
Click to expand...
Click to collapse
Tried all that, loads it but phone won't boot up properly cos it can't write media to internal partition E
[Ramad] said:
This one is easy to fix so don't panic.
Download this ROM and extract (Odin 1.7 and 512.pit are included), then do as follows:
-Start Odin and load 512.pit, don't connect the phone yet.
-Make sure "Re-Partition" is checked, don't change anything else.
-Load PDA.tar.md5 as PDA, MODEM.tar.md5 as PHONE and CSC.tar.md5 as CSC.
-Put your Phone on download mode and connect it, start flashing.
When flashing is done, the phone will enter recovery mode, if it get stuck at the same error, simply do a wipe/factory reset and reboot the phone, the phone shall boot normally then.
Good luck.
Click to expand...
Click to collapse
Thanks for this. Got that file, using Odin and it gets as far as saying "Do not turn off Target" and it has been on that for approx 15 mins now. Is that too long?
tojjer said:
Thanks for this. Got that file, using Odin and it gets as far as saying "Do not turn off Target" and it has been on that for approx 15 mins now. Is that too long?
Click to expand...
Click to collapse
Yes, that is too long. Unplug the cable and take out the battery for 2 min. then put on download mode before you connect the phone and flash again.
When you unplug it now an error will appear, don't worry about it, just take out the battery for 2 min. and you shall be able to enter download mode again.
[Ramad] said:
Yes, that is too long. Unplug the cable and take out the battery for 2 min. then put on download mode before you connect the phone and flash again.
When you unplug it now an error will appear, don't worry about it, just take out the battery for 2 min. and you shall be able to enter download mode again.
Click to expand...
Click to collapse
You are one clever fella, don't know how to thank you enough.
It worked by doing that, and now it's back to stock I presume?
Is it safe for me to root again to use things like setcpu and lagfix?
Again, I can't thank you enough. My wife was in her element nagging me that I'd just cost us a lot of money !!
Tojj
tojjer said:
You are one clever fella, don't know how to thank you enough.
It worked by doing that, and now it's back to stock I presume?
Is it safe for me to root again to use things like setcpu and lagfix?
Again, I can't thank you enough. My wife was in her element nagging me that I'd just cost us a lot of money !!
Tojj
Click to expand...
Click to collapse
You are welcome, yes, it's back to semi-stock now.
In phone dialer enter the following : *#272*your_imei_number_here#
Put the phone IMEI-number in the code above and see if your CSC is XEU, if it's XEU then you are at stock, if not then choose XEU and hit "Install", the phone should reboot and reset and you will be fully at stock.
Root with SuperOneclick: http://forum.xda-developers.com/showthread.php?t=803682 Use 1.5 after enabling USB-debugging mode , and reboot, newer ones tends to hit or miss.
I think that you might need to try using the phone without a lagfix, if you can't live without it then try voodoo http://forum.xda-developers.com/showthread.php?t=774500 which uses EXT4 filesystem, it's way more secure than EXT2 that you were using, and it has a nice audio fix.
You will be good anyway...tell your wife that it's not easy to kill a Galaxy S, unless you use a hammer ofcourse.
I think she'll be saving the hammer for me !!
Hope it doesn't matter which 1.5, gonna try 1.5.5.
I'll take your advice on trying it without lagfix for a while, see how it goes.
Sorry to be a pain, but doesn't Froyo have apps2sd built in, cos at the moment it seems to be saving them to my phones internal memory, not internal/external sdcards?
The applications are always saved to a partition called /data , it's 2GB in size.
The internal SD-card is divided as 2GB /data and 6GB /sdcard.
some applications can be moved to the internal/external SD-cards, you can check that under Settings>Applications>Manage applications and choose an application, if the button "Move to SD card" is highlighted then the application can be moved/run from the SD-card.
Thanks, that explains it.
Phone was a little laggy at first but seems to have speeded up after a reboot.
I'll leave you alone now ( for a while at least )
Thanks again, you've been really helpful, and hopefully shut my Mrs up for a while
And that takes some doin, believe me !!