[Q] Tattoo Touch screen not responding - Click General

Yesterday i found the touch screen in my tattoo not responding.I tried hard reset,flash new rom but still the same problem. I opened the case and found a connector to the display broken.Could i need to change the full display or only the connector.
Here is the Picture of the connnector in my phone
http://i52.tinypic.com/2w65g02.jpg
Is this the connector to the display or something else.Coz in a picture i found in the internet the connector is on other side...any one plz clarify this.
http://i52.tinypic.com/2lbnhgz.jpg
http://i51.tinypic.com/2zphz5g.jpg

PLEASE POST THIS TYPE PROBLEM IN HARDWARE SECTION
FOR MODERATER move this post to hardware section

yatin kumar said:
PLEASE POST THIS TYPE PROBLEM IN HARDWARE SECTION
FOR MODERATER move this post to hardware section
Click to expand...
Click to collapse
Which hardware section are you talking about, officer?

yatin kumar said:
PLEASE POST THIS TYPE PROBLEM IN HARDWARE SECTION
Click to expand...
Click to collapse
LOL wheres that then?
Anyways... sounds like you need a new digitizer. I bought one off ebay for about £12 and fitted it myself. You just need a couple of hours to do it. Heres one...
http://cgi.ebay.co.uk/ORIGINAL-HTC-...UK_Mobiles_Accessories_RL&hash=item19c0a8b6f0
When you do it, you have to glue the digitser to the screen surround if i'm not mistaken.
BTW
The connector you are looking at is the connector for the digitiser, but it folds around the back and comes out the side. You have to be very careful when fitting it.

Ihaveatattoo said:
Which hardware section are you talking about, officer?
Click to expand...
Click to collapse
Tattoo/Click Accessories section
I am trying xda site garbage free & post are at right place ( a little effort )

I think you are being a bit pedantic. A wouldn't call the digitiser an 'Accessory'. Maybe you should rename the Accesories section to 'Hardware Issues and Accesories'.

dom_b said:
LOL wheres that then?
Anyways... sounds like you need a new digitizer. I bought one off ebay for about £12 and fitted it myself. You just need a couple of hours to do it. Heres one...
http://cgi.ebay.co.uk/ORIGINAL-HTC-...UK_Mobiles_Accessories_RL&hash=item19c0a8b6f0
When you do it, you have to glue the digitser to the screen surround if i'm not mistaken.
BTW
The connector you are looking at is the connector for the digitiser, but it folds around the back and comes out the side. You have to be very careful when fitting it.
Click to expand...
Click to collapse
thanks dom_b.
i will buy it from ebay.
yatin kumar said:
PLEASE POST THIS TYPE PROBLEM IN HARDWARE SECTION
FOR MODERATER move this post to hardware section
Click to expand...
Click to collapse
Where is exactly the H/W section for tattoo..
I posted it here coz, in this section i will get fast response from other tattoo owners.

Sorry
strangre said:
Where is exactly the H/W section for tattoo..
I posted it here coz, in this section i will get fast response from other tattoo owners.
Click to expand...
Click to collapse
Sorry
It is accessories section
there id a thread LCD
http://forum.xda-developers.com/showthread.php?t=671446
your answer is posted previously
you can check

yatin kumar said:
Sorry
It is accessories section
there id a thread LCD
http://forum.xda-developers.com/showthread.php?t=671446
your answer is posted previously
you can check
Click to expand...
Click to collapse
thanKs yatin..

Related

Due to lack of interest I would like this tread closed.

Due to lack of interest I would like this tread closed.
Due to lack of interest I would like this tread closed.
Due to lack of interest I would like this tread closed.
Due to lack of interest I would like this tread closed.
Well nobody is going to pay so much for a used one when a brand new Qtek S110 (that is a magician with 128MB RAM preinstalled) goes for around $400. Better drop another $100 or you won't find anyone. Besides, try eBay - better for that kinda stuff.
Due to lack of interest I would like this tread closed.
Due to lack of interest I would like this tread closed.
Due to lack of interest I would like this tread closed.
life02 said:
still no takers?
Click to expand...
Click to collapse
hi life02,
i'm so sorry, that no one is taking this offer, that i must respond...
Well.. BTW, i was looking today at some sites and found Magician for 170 Euro. new...
So what else can we say here...
take care
buzz
Hey, can i ask where you found the phone for 170?
tjohnso1 said:
Hey, can i ask where you found the phone for 170?
Click to expand...
Click to collapse
Yes indeed. Link please???
aZooZa said:
tjohnso1 said:
Hey, can i ask where you found the phone for 170?
Click to expand...
Click to collapse
Yes indeed. Link please???
Click to expand...
Click to collapse
@ http://www.sms.at/handy_zubehoer/handyboerse/
buzz

That's new...

Any reason that this is now the G1 Forum (HTC Dream: G1), or was it a mistake?
Update: Poll added, let them know what you think.
Edit: At the request of someone, there is a new option "I really don't give a f*ck, xda can burn in hell for all I care", unfortunately this can't be added in the poll so post it if you want that vote.
Another edit: Also, you can now vote "Pumpkin Pie"
The third edit: "Everyone on xda is dumb because there is lead in the yellow forum paint" another request by someone.
JAguirre1231 said:
Any reason that this is now the G1 Forum (HTC Dream: G1), or was it a mistake?
Click to expand...
Click to collapse
I just noticed it too. Seems a little odd. I was so used to seeing "Dream."
drtretj said:
I just noticed it too. Seems a little odd. I was so used to seeing "Dream."
Click to expand...
Click to collapse
That's what threw me off.
edit: My post count is now palindromic.
Not suitable.
It is DREAM, nothing else.
"G1" is for retards ONLY.
Yeah it needs to be put back to "Dream", "G1" is incorrect and offensive.
G1 is a trademark of T-mobile and not the model name of the phone.
Don't see a "G1" here: http://www.htc.com/www/product.aspx
Apart from anything else, I usually get here by:
alt+d d r e down enter, which is now broken (I start in "Dream development")
and the sapphire is now called HTC Sapphire: myTouch 3G, Magic
so is mt3g's 32a or 32b cause my magic is 32b uk version no point me looking there as most roms are 32a based
I actually preferred it with the Generic (Read as NOT T-Mobile's names) names for the phones
It wasn't like that when I went to bed, and I noticed they did the same thing to the kaiser section as well, changing it to Tilt, TyTNII, yada yada yada, Kaiser.
I think it is stupid as well. It is like they just put up a huge neon sign calling all n00bs.
pjcforpres said:
It wasn't like that when I went to bed, and I noticed they did the same thing to the kaiser section as well, changing it to Tilt, TyTNII, yada yada yada, Kaiser.
I think it is stupid as well. It is like they just put up a huge neon sign calling all n00bs.
Click to expand...
Click to collapse
It wasn't like this 5 min. before I posted this thread, it is new today. Now instead of searching "Dream Android Development" to get to xda easily after a wipe I have to find the next thing that will work.
JAguirre1231 said:
It wasn't like this 5 min. before I posted this thread, it is new today. Now instead of searching "Dream Android Development" to get to xda easily after a wipe I have to find the next thing that will work.
Click to expand...
Click to collapse
it's good to know i'm not the only one perturbed by this
Who wants to round up some pitchforks? I say we go let them know what we think in the general section of this site! Why did nobody ask us first what we would think of such a change?
pjcforpres said:
Who wants to round up some pitchforks? I say we go let them know what we think in the general section of this site! Why did nobody ask us first what we would think of such a change?
Click to expand...
Click to collapse
apparently xda is not a democracy!
grandomegabosses said:
it's good to know i'm not the only one perturbed by this
Click to expand...
Click to collapse
I added a poll, I'm sure I know what the answer will be...
JAguirre1231 said:
I added a poll, I'm sure I know what the answer will be...
Click to expand...
Click to collapse
And I started a thread in the general section of the site where us pions get to go complain... how do you add a poll to a thread?
grandomegabosses said:
apparently xda is not a democracy!
Click to expand...
Click to collapse
XDA? Anarchy? No never
pjcforpres said:
And I started a thread in the general section of the site where us pions get to go complain... how do you add a poll to a thread?
Click to expand...
Click to collapse
Thread tools at the top
I agree with everyone; this change absolutely sucks. It must be part of their effort to have include non-thc phones? Hell the same phone can have the 4 different carrier names, are they going to have sections for all of them?
JAguirre1231 said:
Thread tools at the top
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=620998
Thank you good sir! I was looking all over edit post with the enthusiasm of a young puppy, yet was not finding the bone.
pjcforpres said:
http://forum.xda-developers.com/showthread.php?t=620998
Thank you good sir! I was looking all over edit post with the enthusiasm of a young puppy, yet was not finding the bone.
Click to expand...
Click to collapse
Too bad you can't edit it, I have a request from somebody to put in but can't add it. In first post if you want to vote for that
JAguirre1231 said:
Too bad you can't edit it, I have a request from somebody to put in but can't add it. In first post if you want to vote for that
Click to expand...
Click to collapse
I got it added in.

Reviving an old HTC

Well, I'm about to buy a HTC HD2 (the t-mobile version) to repair it, (like a hobby thing), anyway, the phone seems to have the LCD broken, the digitizer seems ok (but as far as I know they aren't expensives, like U$S 15), So here are the questions:
I want to buy the LCD replacement, but I'm not sure which one (I know I have to buy the T-mobile version) but some seems to require soldering a connector, and others don't, also do I need special tools for opening the cellphone? Is there any guide on the internet that you could recommend me? and how much should I paid for the Lcd? any other advice? Thanks!
edit: I forgot the [Q] on the title.. can't edit it, sry I'm new
you can probably open it without using special tools, altough you will need T9 screw drive if im correct, here's a video of official assembly/disassembly video leaked by HTC. pocketnow[dot]com/hardware-1/official-htc-hd2-disassembly-assembly-training-videos-leaked
LCD and digitizer is glued together, theres a video there showing how to take it apart i think.
Good Luck!
YaPeL said:
Well, I'm about to buy a HTC HD2 (the t-mobile version) to repair it, (like a hobby thing), anyway, the phone seems to have the LCD broken, the digitizer seems ok (but as far as I know they aren't expensives, like U$S 15), So here are the questions:
I want to buy the LCD replacement, but I'm not sure which one (I know I have to buy the T-mobile version) but some seems to require soldering a connector, and others don't, also do I need special tools for opening the cellphone? Is there any guide on the internet that you could recommend me? and how much should I paid for the Lcd? any other advice? Thanks!
edit: I forgot the [Q] on the title.. can't edit it, sry I'm new
Click to expand...
Click to collapse
Hey there YaPeL and welcome to XDA!
Here is a link to some disassemble and reassembled videos. I found this posted by fellow member apallohadas in another thread. Wish you luck.
http://pocketnow.com/hardware-1/official-htc-hd2-disassembly-assembly-training-videos-leaked
Edite: the poster above bit me by posting the URL lol. But it seems thier effert to post it as a link failed
T-Macgnolia said:
Hey there YaPeL and welcome to XDA!
Here is a link to some disassemble and reassembled videos. I found this posted by fellow member apallohadas in another thread. Wish you luck.
Edite: the poster above bit me by posting the URL lol. But it seems thier effert to post it as a link failed
Click to expand...
Click to collapse
check the link before posting first !
backlashsid said:
check the link before posting first !
Click to expand...
Click to collapse
Yeah sorry about that. I just spent like at least twenty minutes to get that link to work and for some reason it just would not so I just copied and pasted the URL. I have never had that problem....... Aghhhhhhh. Anyway sorry again.
Well, thanks for the warm welcome! and about the price to pay for the screen + digitalizer? 80 U$S is alright? (if, it can be told) and thanks again for the info, in a few months I'll post some before and after screens
Oh, and by the way, I don't have a T-Mobile Sim card, Will I be able to unlock the phone? thanks.
T-Macgnolia said:
Hey there YaPeL and welcome to XDA!
Edite: the poster above bit me by posting the URL lol. But it seems thier effert to post it as a link failed
Click to expand...
Click to collapse
I can't post any links till i get 8 posts thats why my link didnt work, altough i did put down [dot]
jamaza said:
I can't post any links till i get 8 posts thats why my link didnt work, altough i did put down [dot]
Click to expand...
Click to collapse
Yeah I noticed after I added that that it was your first post just never did bother adding that to my post. I meant no harm or disrespect by it though. Thanks for trying to help out here as all should do when they can.

RIP HD2

I guess this is the last time i search for HD2 forums...
Just broke it while trying to replace a flax cable because of a broken proximity sensor
thanks for a great forum. now on to look for a replacement.
BTW, if someone would like to buy it for some few $$$ please PM me
kuku2004 said:
I guess this is the last time i search for HD2 forums...
Just broke it while trying to replace a flax cable because of a broken proximity sensor
thanks for a great forum. now on to look for a replacement.
BTW, if someone would like to buy it for some few $$$ please PM me
Click to expand...
Click to collapse
Why don't you try the marketplace for the sale:
http://forum.xda-developers.com/forumdisplay.php?f=476

Everyone with a Cracked Camera Lense post oyur Serials in here!

Hi All, i created this thread regarding to this thread: http://forum.xda-developers.com/showthread.php?p=40803795#post40803795
Could you all of you who that unfortunate enough to have the cracked lense on the camera post your Serial Number in here? What region your in also. . . Then we can determine if its batch related etc etc. And maybe then something could be done about it. . .
I wont post my serials as it has not happened to me. But please do, it may help some of you out. . .
MODS: Maybe you could make this into a Sticky as it now is becoming more common.
dobknobby said:
Hi All, i created this thread regarding to this thread: http://forum.xda-developers.com/showthread.php?p=40803795#post40803795
Could you all of you who that unfortunate enough to have the cracked lense on the camera post your Serial Number in here? What region your in also. . . Then we can determine if its batch related etc etc. And maybe then something could be done about it. . .
I wont post my serials as it has not happened to me. But please do, it may help some of you out. . .
MODS: Maybe you could make this into a Sticky as it now is becoming more common.
Click to expand...
Click to collapse
FA34CW--------
Quit dropping your phone's people
Lol only one person...I would have to say either odd one that broke and bad handling only one post# fail
Sent from my HTC EVO 3D X515m using xda app-developers app
gemini002 said:
Lol only one person...I would have to say either odd one that broke and bad handling only one post# fail
Sent from my HTC EVO 3D X515m using xda app-developers app
Click to expand...
Click to collapse
God da*nit! This was a useful thread and 2 people just had to go and troll it. Can a moderator please delete my post along with those other 2?
This thread actually serves a purpose. If we can determine which batch of phone are affected we can possibly help HTC fix the problem.
Sent from my HTC One
Dude no offense but clearly this is not. Quality issue or there would b more than one post..maybe it was a freak accident and one left the factory but I'm sure that others just handled their phones badly otherwise there would b more posts sorry man common sense
Sent from my HTC EVO 3D X515m using xda app-developers app
TEKtheMAESTRO said:
FA34CW--------
Click to expand...
Click to collapse
Congratulations for having the only other post in this thread without spelling or grammatical errors :good:
Education? Anyone heard of it?
Thread fail.
This thread is useless. You cant pinpoint a broken camera on batch numbers. Its not the same or as widespead as the gap issue. ITS COMPLETELY RANDOM
Blame it on your mail carrier if you have to place blame. Maybe you should try to get the ups or fedex unique warehouse number that handled your box?
Its just as useless as trying to pinpoint a batch number lol...
compact_bijou said:
Congratulations for having the only other post in this thread without spelling or grammatical errors :good:
Education? Anyone heard of it?
Click to expand...
Click to collapse
Most people just do a quick post on this forum when doing so from a phone..auto text sometimes maybe the cause , being in a rush or english might not be their first language don't be so anal...
On this matter I strongly believe it was poor handling or someone leaned the glass on a rough hard surface maybe a key while the phone is in ones pocket..close this thread pointless
Sent from my HTC One using xda app-developers app
actually if some of you bothered to read, this is a spinoff thread from a previous one thats ALL about random users with lenses that cracked out of nowhere. Ill sum it up for you. Theres about 15 of us thus far...and all of us happen to have the same batch number except for one. All of us have the FA34 batch. man, this site has a lot more idiots than I thought.
FA34 covers an entire month's worth of production from that factory. You've narrowed it down to April! Yay!
If the thread that you reference already contains all the information you are reposting here, then there is no need for this thread.
TEKtheMAESTRO said:
man, this site has a lot more idiots than I thought.
Click to expand...
Click to collapse
Infested mate, infested.
NxNW said:
FA34 covers an entire month's worth of production from that factory. You've narrowed it down to April! Yay!
If the thread that you reference already contains all the information you are reposting here, then there is no need for this thread.
Click to expand...
Click to collapse
Concur about this thread, but the affected phones were FA34CW, IIRC.
Wow this has turned into a trolling thread,
Yes this thread is now useless and now should possibly be closed...
BUT... when i created this thread last month, there were alot of disputes about the camera lens, and nobody was posting serials etc etc... so i thought it may be useful...
Aslo, why does one have to pick up on peoples spelling or gramma? Some people could really take that to offence.. ever heard of stupid predictive text? Dyslexia? not just a bad education man!
I can see the reason for this thread, but it has been ruined. It is obvious from the other thread that a decent number of people on xda have a broken camera cover. It's a real issue, not people mistreating their phones. I mean how the hell do you break the lense cover anyway? Maybe if you're really unlucky and don't use a case... But with a case on?
Anyway, the other thread is going much better than this one.
Sent from my HTC One using xda app-developers app
SH34EW
FA34EW
How long do I have before my flame retardant suit is ineffective?
Hahahaha... Both you guys found the correct thread for this already. But thanks for bumping this superfluous thread anyway!
I heard from another website that the cracking is caused by the expansion of the aluminum when it gets hot.

Categories

Resources