I want to introducing new Tool for Backup.
More features are under development.
At the moment tested and confimed devices are only S8500.
To support S8530 or the other bada handsets, we need please feedback.
It has Beta stadium at the moment. Please visit this site for Download:
http://www.mortara.org/board/
Thank you very much mortara.
Best Regards
I thank you for the greeting Mortara tool but the tool where ...
Download please here:
http://www.mortara.org/board/
After Registration you see subforum of WaveBackup.
You can test this Tool if you wish.
Best Regards
@addfree: Thanx for the link. I have downloaded it. i will test when i will get back from my work. Thanx again.
Things are getting wonderful for wave and bada. first social hub premium and now backup tool.
Nice app, and something new after sTune (little outdated now).
Waiting for more options in mod, edit sytem files easy
and for full access too all sector in memory.
Yay, I can finally post in this section now
Thanks for posting about this adfree. Nice to see we'll have another method of getting into our phones apart from sTune. sTune was a great little tool, but sadly hasn't been updated in quite awhile.
nice job!
Does you have the apps that can run backup on Bada WaveII and can use restore on Wave II also ?
@ joolawan
At the moment under development. Beta stadium.
Generally S8500 = S8530... if sTune work for you, then also WaveBackup would do this.
But Rumours say. That on higher Firmware S8530 not more work with sTune...
NO idea. I have no S8530 to test.
If you can, please post result if sTune work with your S8530.
Thanx in advance.
Best Regards
Edit:
XXJKA for S8530 is told as incompatible with sTune... not sure, not confirmed and no idea what concrete not work...
Any news about WaveBackup ??
BC it is too quiet here
Jka version on wave II s8530 file system access and working read and write
Sent from my X10mini using XDA Premium App
Any news about WaveBackup ??
Click to expand...
Click to collapse
Latest Version is 1.0.12 with few new features and improvements.
Please look here:
http://forum.xda-developers.com/showpost.php?p=12402178&postcount=19
I will post Screenshots soon.
@ chicco
Thanx for feedback.
Best Regards
On my Wave II Filesystem downloading and browsing seems to be working perfectly.
Alas, applications module doesn't want to work, it starts listing applications but shows nothing.
My logfile:
20110410 19:07:10 () : ************** First line in Logfile.
20110410 19:07:10 () : Exe-Path:F:\Documents and Settings\Właściciel\Pulpit\TEL\WaveBackup\WaveBackup.exe
20110410 19:07:10 () : Version:1.0.12
20110410 19:07:10 () : Temp-Folder:F:\Documents and Settings\Właściciel\Pulpit\TEL\WaveBackup\Temp
20110410 19:07:10 () : Command-Line:"F:\Documents and Settings\Właściciel\Pulpit\TEL\WaveBackup\WaveBackup.exe"
20110410 19:07:10 () : Operating-System:Microsoft Windows NT 5.1.2600 Dodatek Service Pack 3
20110410 19:07:10 () : Platform:Win32NT
20110410 19:07:10 () : Advanced Mode: False
20110410 19:07:16 () : Opening connection on port COM5
20110410 19:07:16 () : ATi4:
Manufacturer: SAMSUNG ELECTRONICS CORPORATION
Model: GT-S8530
Revision: S8530CXJK3
IMEI: <erased>
+GCAP: +CGSM,+DS,+ES
OK
20110410 19:07:16 () : AT+DEVCONINFO:
+DEVCONINFO:MN(GT-S8530);VER(S8530CXJK3/S8530PLSJK4);HIDVER(S8530CXJK3/S8530PLSJK4);PRD(GT-S8530BAAPLS);SN();IMEI();PN();TZVER(20100809);CON(AT,MTP,MTP,MTP)
OK
20110410 19:07:16 () : AT+HWVER:
+HWVER:MP 0.600
OK
20110410 19:07:16 () : AT+USEDMEMORYSIZE:
+used : 85 MB
OK
20110410 19:07:18 () : AT+BATGETLEVEL:
BATGETLEVEL=5 VOLT=4087mV
OK
20110410 19:07:36 () : Get directory listing: /Osp/Applications(0, 2)
20110410 19:07:36 () : Get directory listing: /Mount/Mmc/Others/[email protected]@[email protected]@__(0, 2)
20110410 19:07:39 () : -------------- Last line in logfile.
Click to expand...
Click to collapse
Can you browse the Osp/Applications folder with the fileexplorer part of wavebackup?
how to restore the apps back to the phone after the back ups? anyone tried this thing after flashing?is it working? or only the back up thing?
Currently, WaveBackup can only be used to backup App-Settings and data. To restore these after a full flash, you have to use WaveBackup or sTune and copy the files manually to your phone. I will enable the automatic restore sometome, but currently i'm very short of free time, and this is not top priority for me.
Sorry for giving this thread a bump. What is the manual process for restoring the apps back? Which files do I need to copy?
Related
Hi there boys and girls ... for those interested ....
QC BQS Ana*lyzer 3.0
What is it ?
-----------
Let's call it the ultimate BQS / QC swiss knife and very special Crypto Tool (RSA Signature Calc can be used for any mobile):
BQS only :
----------
1. Load AMSS to extract files or useful infos
(EF81, E81C, EF91, SXG75, EF82, SF71, SL91, M7 or similiar ones)
Features :
Extract Infos from AMSS : USBID, Product.Nr., SVN, SwBuild, Mobiletype
Extract internal filesystem (mif,bar,sig etc. files)
Extract certificates
Extract all BMPs,GIFs,PNGs, JPGs
Extract AMSS signature bytes (if production key)
Show all file references used by mobile
2. Sim_Secure extraction/decryption (non-public)
3. Master-/Usercode/Unlock extraction and direct unlock (non-public)
All QC :
--------
1. Load Partition File to get overview about NAND/NOR structure
2. Make usage of QCs Diag Interface .... to do nice things
(Useful for any QC mobile in the world)
Standard Features :
-------------------
- Send standard diag commands or any hexadecimal command you want (database included)
- Read out all NVItems (range given)
(all that exist, more than QPST normally extracts)
- Backup and Restore all NVItems
- Read out and Dump Firmware in Memory (IRam)
- Read out complete EFS
- Switch to FTM Mode (or anything else you want)
- Get infos about phone ..... etc ..... a lot more functions
- Generate SimSecure Command to write to SimSecure using given file (may brick your phone when used without knowledge)
Bootloader / DownloadMode Features :
-------------------------------------
- Load any file to mobile at any address and execute (bootloader f.e.)
- Read out complete NAND Memory using bootloader (range given) with included MSM6250/A bootloader or any given bootloader
Usage : Take out battery, put in battery, press ON # to enter emergency mode, Execute Loader
or (with SL91,SF71 f.e.) enable FTM mode, Execute Loader
- Use any Download Mode or Bootloader Command to experiment
- Read application memory of newer Diag Ver 6 in Download Mode
- Show complete infos about used NAND after loading of Bootloader
Flasher Features :
-----------------
Flash any QC mobile (OBL Multiboot) with given bootloader
- Flash PBL (dangerous), QCSBL, QCSBL Header and Config Bits, Partition, OEMSBL, OEMSBL Header, AMSS, AMSS Header and EFS
3. Crypto Function :
-----------------
- Calculate CRC-30, SHA1 and MD4 of any file
- Bruteforce bytes to fit CRC-30 needed when qcsblhd_cfgdata.mbn was edited
- Decrypt any RSA-Message, including ASN-1 / SHA Signatures.
- Check firmware signature given Modulus and Exponent
4. Sim_Secure extraction/decryption (non-public)
5. Full Feature JTAG Interface (non-public)
Although it is still a bit buggy and things have to be speeded up ...
it is the successor of AMSS Analyzer .... but more reliable and even much faster
Planned in future :
-----------------
1. Bugfixes
2. Tooltips showing real addresses in graphical window
3. EFS2 Directory Browsing
4. Elimination of extracted files in amss.mbn for better understanding
5. Simple NVItems Editor
6. Porting NVM hack already working with JTAG to COM/USB
7. AMSS signature hack, Exploit for Signature (this will be a tough task)
8. Read out SMS / Addressbook via Diag Interface
NO UNLOCKING ! PLEASE DO NOT REQUEST. THIS PROJECT IS FOR EDUCATIONAL PURPOSES ONLY, NOT TO HARM COMPANIES FOR THEIR EFFORTS.
What we need :
----------------
- Any contribution to the project is welcome.
- Donations for new hardware and software for further development of this tool.
- We need support in programming and documentation XD
Link to the project files :
------------------------
Version 3.00 Fruit Assassin (Major Release)
http://code.google.com/p/qcbqsanalyzer/downloads/list
Cya and keep on reversing,
Viper BJK
For full source, see project homepage.
If you think my tool is useful and you would like to donate some money for further development, feel free to do so :
http://viperbjk.beepworld.de/
great stuff, I admire your work, this has been used to partially unbrick a htc titan (work in progress still, as it crashes on some bit of code in init god knows why).
Hi.
New Version supports MSM7200.
Maybe take an look.
Code:
New version 3.42 out
--------------------
What's new ?
-------------
- Find public keys in HTC SPL.nb via Cryptosearch
- Added Public Keys for [B]HTC[/B] Firmware (Diamond, Kaiser, Raphael)
- Exponent bugfixes
- New RSA Decryption interface
Feedback are welcome.
Thanx.
Best Regards
Forbidden
Your client does not have permission to get URL /p/qcbqsanalyzer/downloads/list from this server.
bad link
Link to the project files :
------------------------
Version 3.00 Fruit Assassin (Major Release)
http://code.google.com/p/qcbqsanalyzer/downloads/list
Does this software works on new phones, or is there any similar software?
i wanted to change my Bootscreen on my XDA Neo , but the only way i found was not simple , it was very Complicated....
i looked at the used Programms and thought "hmm. you can make it Simplier....."
so , i wrote a nice Batch script that will do almost all steps self
FAQ:
Code:
this Toolchain will Change ALL Bootscreens of your XDA Neo , HTC Prophet , Qtek S200 etc....
(works also for HTC Wizard , please use another flasher for Wizard!)
Just Place your 3 Bitmap Files (see below for formats) in this Directory and Double click the
"Automatic.bat" , then Follow the Instructions.
FAQ:
Q:what OS supports this Toolchain?
A:
On PC: Windows XP ,Vista untested......
On the HTC: Windows Mobile 5/6/6.1
----------------------------------------------------------
Q: Supports it only G3 Devices or also G4?
A: it Supports BOTH , at the end before you flash , the
Program will ask you if you have an G3 or an G4
----------------------------------------------------------
Q: what do i need?
A: First you need the 3 Pictures (or 3 times the same)
1. the Bootscreen at Start (without SPL etc.)
2. the Bootscreen with SPL etc. Infos
3. The Bootscreen after the 2. Bootscreen
----------------------------------------------------------
Q: in Which Format?
A: all in 240x320 (Portrait) , 24Bit Bitmap (*.bmp)
----------------------------------------------------------
Q:how need the Pictures to be named?
A:
Bootscreen 1: htc.bmp
Bootscreen 2: splash.bmp
Bootscreen 3: welcomehead.bmp
----------------------------------------------------------
THX to Ar-ras for his help in Batch
THX to the XDA Developers (http://forum.xda-developers.com)
for all the Nice stuff;)
THX to HTC for Building the BEST PDAs
(c) by Willmaster
Please post ANY Failures or Ideas to make it better
if you want to post this anywhere , Post it and send me the link please to my email:
[email protected]
Download (Always the newest version):
http://www.willmaster.gulli.to/htcstuff/Bootscreen_Changer_1.0.rar
Link is dead
Could anyone refresh the link for bootscreen changer ?
link pleaseee
Hi.
EDIT: Update Info added at the end of the page.
I hope someone will be able to help me.
First I apologize if this question already exist, but I'm too tired, and I hope there won't be a lot of grammar errors.
My brother had some error with LG Optimus L7 saying "Modem crash has been occured".
But first more details.
As I said:
LG Optimus L7 is what he is using.
He have few apps installed: sofascore, avg, viber, WhatsApp - I will be able to write full list of apps later this day.
Yesterday he update it to newest version of android - "Android 4.2, Jelly Bean"
There wasn't any problem for the whole day;
And then in the morning something happened with the phone.
And this message was on the phone - And since the picture I had taken with another phone is little doubled I hope I will write what does the error says correctly :
-----------------------------------------------------------------------------------------------------
Modem crash has been occured
Please do following action
Capture this screen
Get ramdump file from "OPBT" (I think) - Memory Debug App Tool
Send email to (I think it says) [email protected]
-----------------------------------------------------------------------------------------------------
ERR crash log report, Version 2. - Does this mean that there was also another crash......if yes, did phone restart itself then.....and is it possible to restart itself.
Error in file NV (I think), line 0
Time of crash.... some time - 3 a.m.
Now it says something I can't read.....
Build ID: PF00-M722FA-V20a-MAR-08-2013-XX - something like this.
REX-TOB ptr: 0x2?4f6300 ?-means something
tCD: task_name: DOO
Register values from nex (I think) core:
And now there is ~15 more or less "errors" which I can't read, but they say this I think:
ARM_SWC_R0 : 0x0A0A0A0A
ARM_SWC_R0 : 0x000000000
.........
ARM_SWC_R10 or RT0 : can't read.
ARM_SWC_R10 or RT0 : can't read.
ARM_SWC_R12 or RT2 : can't read.
More likely it is R12 and R10.
........
What else I can read:
ARM_JVH_SPSR : 0x00000000
....... - means that Error repeat itself or I can't read it so I can't write it
And it is possible that SWC is actually SVC
Above is on the left column, and this is on the right one:
ARM_SVC_R1 : 0x00000000
ARM_SVC_R3 : 0x00000000
ARM_SVC_R5 : 0x00000000
ARM_SVC_R7 : 0x00000000
ARM_SVC_R9 : 0x00000000
ARM_SVC_R11 : 0x00000000
ARM_SVC_CP (I think) : 0x00000000
.........
ARM_CPSR : 0x00000000
Click to expand...
Click to collapse
Also - the battery drained a lot, from 70% (12:30 am - 8 a.m.) to 10%, even more.
Also, it is a new Phone, 1 week old, so it is still under warranty if this is some bigger problem.
Thank You for your help, hope someone knows what could be the problem, any advice appreciated.
Should we worry about this.
EDIT: Update Info:
It seems that "we" needed to "restart" the phone after we update it. (Since the phone restarted itself after the update we didn't think about that then)
And that Notice we didn't saw anywhere till yesterday on some forum.
After that day, after phone crash error has appeared - ALL works perfectly since then.
All improvements by Update you can really notice, especially about battery, battery drain is a lot slower with this new update.
So, I could say that the problem is solved. If one day repeat itself, I will be back.
Thank YOU!
Best Regards
today i tried to root a friends l5 (e612)
i also unlocked the boot loader and installed cwm....
but on switching it on it is now giving me timely reboots even in recovery mode.
please help me.....
i even tried flashing the stock rom via KLDZ.. but it is not even opening in download mode..
please give me a video tutorial on how to do it ...
also is there cm10 for this device as the e610 cm10 gave me status 7 error
please reply asap!!!
thanking you in anticipation !
Well first of all, the bootloop means you took the wrong bootloader, you probably took the one from e610.
So how to go into dowload mode so you can run kdz updater probably?
1. Remove battery
2. Hold both volume buttons.
3. Connect your phone to usb cable.
Sent from my LG-E610 using xda app-developers app
it did help but norw i am getting errors flashing the flie via kdz updater
pandorasmindabhi said:
it did help but norw i am getting errors flashing the flie via kdz updater
Click to expand...
Click to collapse
Please post your errors here.
---------- Post added at 05:19 PM ---------- Previous post was at 05:15 PM ----------
Also check out this article for status 7 errors: http://forum.xda-developers.com/showthread.php?t=1884746 (kinda old, but may still work)
Maybe that will fix it.
[R&D Test Tools Log File]
20:39:50 : Launching SW update
20:39:50 : Unpacking KDZ
20:40:58 : KDZ file extraced
20:41:30 : Files were extracted.
20:41:30 : LGMobileDL Load.
20:41:30 : Port = -1
20:41:30 : Connecting to phone
20:41:40 : Check Phone mode = 2
20:41:58 : Phone type check.......
20:41:59 : _DetachDLL Call
20:41:59 : _DetachDLL Call End
20:41:59 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LGE612AT-00-V10d-IND-XXX-NOV-14-2012+0.dz
20:41:59 : Param : moduleDir =
20:41:59 : Param : waitTime = 0
20:41:59 : Param : UsbHighSpeed = 1
20:41:59 : Param : PhoneMode = 2
20:41:59 : Param : BinVersion = V10D_00
20:41:59 : Param : AuthMark = 0
20:41:59 : Call fn_StartUpgrade
20:42:00 : CDMA: wParam = 206, lParam = 0
20:42:00 : Model Dll Msg Not Found(206, 0)
this is what i get
Is it a. Dz file or. Kdz file which you are trying to update?
Because you need a .Kdz file and i think you're trying to update a .Dz file...
Download the correct kdz file from here http://lg-phone-firmware.com/index.php?id_mod=12
Sent from my LG-E610 using xda app-developers app
Dev-Dat you are right.
Look at his path: C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LGE612AT-00-V10d-IND-XXX-NOV-14-2012+0.dz
Got sucessful after rebooting pc...
Thnks.
Sent from my GT-S5360 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=2186161
For my tutorial about rooting and everything.
Sent from my LG-E610 using xda app-developers app
same problem
pandorasmindabhi said:
today i tried to root a friends l5 (e612)
i also unlocked the boot loader and installed cwm....
but on switching it on it is now giving me timely reboots even in recovery mode.
please help me.....
i even tried flashing the stock rom via KLDZ.. but it is not even opening in download mode..
please give me a video tutorial on how to do it ...
also is there cm10 for this device as the e610 cm10 gave me status 7 error
please reply asap!!!
thanking you in anticipation !
Click to expand...
Click to collapse
hey too have a same problem, please help me out...how to bring it at least to its original state
problem solved
pandorasmindabhi said:
today i tried to root a friends l5 (e612)
i also unlocked the boot loader and installed cwm....
but on switching it on it is now giving me timely reboots even in recovery mode.
please help me.....
i even tried flashing the stock rom via KLDZ.. but it is not even opening in download mode..
please give me a video tutorial on how to do it ...
also is there cm10 for this device as the e610 cm10 gave me status 7 error
please reply asap!!!
thanking you in anticipation !
Click to expand...
Click to collapse
hay man i have soved the rebooting problem
and brought my lg e612 to original state...:laugh::good: and now its working fyn you want any help???
www[dot]dzgsm[dot]com/vb/threads/15253-lg-optimus-l5-e61-e612-e617.html
forum[dot]gsmhosting[dot]com/vbb/f799/how-convert-formula-kdz-octoplus-box-1785600/
[dot] = .
Hi
Hopefully someone can help me with a problem. I have purchased a shop returned Zenpad 10 from a local auction. The pad works perfectly and came with the box and looks brand new. Stupidly, the first thing I did was perform a factory reset, not knowing anything about FRP. Now I can't set the pad up with my details as it wants to know the previous google account details. I have no way of getting these details. I have tried everything I can find on the net to no avail. Quickshortcut maker with Google account manager will not work, I just get error. Have installed TWRP and wiped everything and flashed the stock ROM again but I still get the same problem.
Android version 7.0
Any ideas? Thanks in advance
Colin
I'm in the same boat as you. Which model do you have? None of the old FRP bypass techniques work on my p00c. I can get to the desktop, settings and chrome but I cannot access Developer Options nor will it allow me to open a new window when I try to add a new password via GAM. Any help out out there?
looking for solution for same model asus zenpad 3S 10 (Z500M) P027..
Try this. Worked for me!
youtu.be/7Krbv71bGyU
Task Starting ADB Interface... OK
Model : P00I
Manufacturer : asus
Platform : msm8952
CPU Arch : arm64-v8a
Android Serial : G7NPCX003659A8X
Security Patch : 2016-11-01
Connection : mtp,adb
Timezone : Asia/Saigon
Android Version : 7.0
Android SDK : 24
Build : NRD90M.VZW_P00I-V5.1.0-20161124
Build Date : Thu Nov 24 14:58:46 CST 2016
IMEI : 359819070059142
Device Name : P00I
Product Name : VZW_P00I
CP : 101901_16.1.0_160804
Checking permission... no root
Removing FRP... OK
UNLOCKTOOL 2021.11.29.0
Elapsed time : 6 seconds