[Q] Bricked Tab? - Galaxy Tab General

Verizon Tab here.
Finally decided to try installing KhasMek's K-leanMod v2 rom.
I started by installing the bootstrap app from the market as per the instructions. The app rebooted the tab. It backed up everything. It said everything was successfull. After that I rebooted in download mode (power +volume down mode)
I then flashed the rom I downloaded from the thread. When I rebooted it just stuck on the samsung logo. I let it sit for 20 minutes and nothing happened. I decided to try to reflash to see if that would work but now I can't get back into download mode. Interestingly I can get into download mode when it is plugged into the wall, but when its connected to the computer it does not work...
Any suggestions?
Thanks
EDIT: It finally decided to connect to the computer and I flashed the CWM, did a factory reset and then flashed the custom rom and it started working again. I think it might have been due to low battery (it was at 3% when it finally came to)? Anyways just glad I dont have an expensive paperweight.

Just discovered a new problem...
When I have the tab plugged into the wall, it wont turn on. It just sits frozen at the battery charge screen. When I unplug it and power it on all is well.
Any idea what that could be?

Related

[Q] Bricked Phone, can't get into recovery or download mode

Got Clockwork installed, and put Noobnl's 1.1.1a ROM on this afternoon. Immediately had a couple of times I had to pull the battery. Well, I plugged the phone into my PC to try another ROM, and the screen blacked out. Yanked the battery, and it's suck on the "SAMSUNG" opening screen. Can't get into Recovery, can't get into Download mode.
suggestions?
Edit: gotta take the SD card out.
Edit2: Successfully flashed to DI18, Odin was all happy. Still can't get past the "SAMSUNG" though.
let the phone sit untouched for 45 minutes, and tried again.. started up.
Weird.
yea if you can get to samsung screen then its not bricked

Charging issues (solved)

purchased a new Galaxy S4, from sprint.
rooted using auto-root and installed teamwin recovery. all good. kept using the phone flawlessly for three days.
was going to flash CM10.2 through the recovery when i noticed the big button in the CyanogenMod home advertising the installer.
since this phone is compatible, then decided to try that.
CM11 installed right away and worked great, charged the phone, took a couple pictures, great.
then an update was requested to the ROM, so i installed it.
that update resets all my settings, so i started downloading all my apps and applying the settings again.
when the phone was around 18% of charge, i plugged the phone and nothing happened.
tried another phone with stock android in the same charger and everything went well fine so, i turned off the
SGS4 and plugged it again.
it vibrated once, (like it was about to start charging) but nothing happened. a few seconds later, it vibrated again, and that went on and on...
turned back on the phone in recovery, i noticed that TeamWin was replaced by ClockWorkMod recovery.
wiped Dalvik, cache and did a factory reset. turned phone back off and plugged the charger.
now it vibrates once, the screen lights up, a drained battery shows up and nothing happens, (just like it froze there).
the phone is not taking charge and its dead jim. doesn't have enough charge to power on.
havent tried anything else.
any clues or workarounds?
please and thanks.
EDIT: downgraded to CM10.2.1 and installed chronic kernel for CM10.2, problem solved.

[Q] Sudden shutdown, phone won't boot.

I had just finished flashing and configuring crash rom v19, when my phone suddenly powered off.
Now it's not the first time I flash a new rom to my note 3 by any means, but this is a first.
Now my phone won't power on if not plugged in, and even then it powers on for less than a second, long enough to see the battery charging picture or the note 3 logo.
Recovery won't boot, but download mode works flawlessly, I pulled out odin3 with the stock ROM for my sm-n9005, checked the regin was right and everything, and after flashing using odin all I got was my phone rebooting over and over again trying to access recovery, then it booted no problem to the samsung logo, played the tune and even showed me my lockscreen for a second, and it's back to rebooting itself every 3 seconds.
Anybody have any idea what I'm facing here?
Edit: First thing tomorrow morning I'm going to take it to a store to try a new battery
@E-Chan42.
You can try this out.
I am not sure will this fix your problem.
First, charge your phone for 3 hours. Second, hard reset your phone then flash Stock firmware using ODIN.
amk19 said:
@E-Chan42.
You can try this out.
I am not sure will this fix your problem.
First, charge your phone for 3 hours. Second, hard reset your phone then flash Stock firmware using ODIN.
Click to expand...
Click to collapse
I've had my phone plugged in for a short while, but since it keeps vibrating, showing an empty battery picture turning off, vibrating and so on every second I'm not sure charging will actually difference to my issue, still thanks for the input and I'll give it a try.
Ohm....
Then I guess it must be a Battery issue.
Give it a shot. Let's see if that works.
Took it in to my retailer and samsung guy restored the original ROM with Odin just as I did, when it didn't work he sent it off under garantee, thanks for your help! I'll update when I get a word back!

Probably bricked LG G2 running SlimSaber

So basically this rom is awesome but it had only one problem. When I plugged my phone in the charger while it was turned off, it bootlooped until I restarted with the cable off. It was no big deal and nothing bad ever came out of it.
Yesterday my batter ran out while I was asleep and when I woke up it was already turned off. I, absentmindly, tried to turn it on, LG Logo, off again. Did it one more time, nothing happened, realized it's out of battery. Plugged in charger, try to turn it off/on, usual bootloop happens. Say ok and proceed with what I always did, phone gets past LG Logo, goes into SlimLP boot animation and for the first it has just stayed there. No restarts, just endless loading. Longest i Left it on to load was about 45 minutes. Never got back on.
Apart from that, I think that for some reason my recovery got uninstalled somehow, by itself, a few weeks ago. I only noticed this because before, when I wanted to get into recovery, I pressed the usual buttons and it went straight into TWRP. Now the same buttons take me to the "Factory reset screen". I know that everyone says to just go ahead and press power, but I am afraid, since I am not sure if TWRP is still functioning. This happened to me another time on the same phone, and when I confirmed the factory reset, it factory resetted.
My problem here is that I want to get my music and photos. I'm only able to enter that factory reset screen and download mode. Can I "flash" twrp safely from download mode? Should I use Flash Tool 2014 and Normal flash(which says it keeps the data) a stock g2 rom? Can I mount my phone to the computer in download mode to copy my files? I want the most risk-free approach.
Thanks in advance.
giorgos123 said:
So basically this rom is awesome but it had only one problem. When I plugged my phone in the charger while it was turned off, it bootlooped until I restarted with the cable off. It was no big deal and nothing bad ever came out of it.
Yesterday my batter ran out while I was asleep and when I woke up it was already turned off. I, absentmindly, tried to turn it on, LG Logo, off again. Did it one more time, nothing happened, realized it's out of battery. Plugged in charger, try to turn it off/on, usual bootloop happens. Say ok and proceed with what I always did, phone gets past LG Logo, goes into SlimLP boot animation and for the first it has just stayed there. No restarts, just endless loading. Longest i Left it on to load was about 45 minutes. Never got back on.
Apart from that, I think that for some reason my recovery got uninstalled somehow, by itself, a few weeks ago. I only noticed this because before, when I wanted to get into recovery, I pressed the usual buttons and it went straight into TWRP. Now the same buttons take me to the "Factory reset screen". I know that everyone says to just go ahead and press power, but I am afraid, since I am not sure if TWRP is still functioning. This happened to me another time on the same phone, and when I confirmed the factory reset, it factory resetted.
My problem here is that I want to get my music and photos. I'm only able to enter that factory reset screen and download mode. Can I "flash" twrp safely from download mode? Should I use Flash Tool 2014 and Normal flash(which says it keeps the data) a stock g2 rom? Can I mount my phone to the computer in download mode to copy my files? I want the most risk-free approach.
Thanks in advance.
Click to expand...
Click to collapse
Hi, first If you can enter download mode I think you can flash kdz (Kitkat) file to stock using Flash Tool 2014. But I had this problem once and the keep data flashing didn't work (stucked at 50%), I ended up flashed it with other option (erased all data).
2. You can try the "Factory reset" nice and easy.
I think you can't see files on the device unless you enter Twrp.
It's wise to backup your phone on the computer montly or so, thank you.
I went ahead and nuked my download mode using the SRK tools. Then got access to fastboot, through which I booted to twrp and then I could move my files. All's fine, flashed my ROM again and it's going better than ever.

Sm-g900f (uk) galaxy s5 - arrgghhhhh

Can anyone PLEASE help??
My partner opted to do a suggested update on her S5, but didn't notice the wifi was off. The phone seemed to have done the update, but shortly after it rebooted itself, then again, then again. The frequency of reboot got quicker and quicker and now it loops between the Galaxy S5 splash screen and the SAMSUNG logo, but doesn't go any further.
I managed to boot the phone into reset mode, cleared the cache and then did a factory reset, but that did nothing to prevent the boot loop.
I then downloaded Odin (ver 10.3.7) and what I believed to be the correct firmware (G900FXXS1CPLV_G900FVFR1CPJ1_G900FXXU1CPIW_HOME.tar.md5).
Having checked the battery was charged, I followed the instructions of connecting the phone via USB, loading the md5 in the AP, checking Auto Reboot and F-Set time in the options and clicking the Odin Start button. I had removed the battery, replaced it and then booted it into the update mode (Power, Home, Volume Down, then volume up) with the screen confirming I was in the right place (....do not unplug.... etc).
The file loaded, (green bar at top of the Odin window on my PC) and Odin reported success. I then disconnected the phone, booted in recovery mode, reset the cache and then did a clear data, factory reset.
The same symptoms prevail, STUCK IN BOOT LOOP!!!!
The only thing different is that if I plug it into the USB on my PC, after a while the phone tries to turn itself on and goes into either a boot loop or freezes on the Galaxy S5 Splash screen or the SAMSUNG Logo.
I am charging another battery (just in case that is in some way to blame) and will try again to replace the firmware, but could I be missing something, do I need to do anything with PIT (I thought this was all taken care of by Odin using the MD5 file) or is there some other test I can perform that will show if the phone is fried???
MANY THANKS for looking!
ur going correct, try to reflash it again through odin and dont disconnect phone until it boots into system, it is taking some good time, so just wait and dont do anything this time like clearing anything or restoring. i hope ull get success.
THANKS - but...
Thanks Rayzen, I will try the whole thing again, but I think there is something more to this than a firmware fault!
There and gone again
OK, so on the 4th attempt I got the phone to take the firmware using Odin, it reported success and the phone rebooted itself (several times) and eventually appeared to boot to a new factory reset.
I put in a SIM card and entered my email and google account details and left it charging over night. This morning when I tried to use it, the screen froze and then it rebooted itself. Hey presto, the phone is back to square one with a boot loop.
ANYONE (please) got any suggestions?
THANKS
No one??
same here, same symptoms, same feeling.
when flash gone right... i feel lucky.. but for half hour only, rebooted and angain in boot loop.
I cannot even boot in recovery. flashed TWRP. from 5 boots in recovery only 1 success.
When trying to wipe phone in TWRP - it hangs.
still trying to install some other (custom) rom. still no success.
hope never dies
same things happened here! now cant get samsung galaxy s5 to boot...............
Are you sure your using right firmware? as it took me a few versions before it booted last time this happened?
Could any please confirm what is the right firmware for samsung galaxy s5 900F
It took another 6 or 7 attempts, left it over night and was about to trash it when it booted.
I then received a 'software update available' message and tried installing it. First attempt put the phone back into boot loop so I reflashed it again using Odin.
That worked immediately the over the network software update installed and now phone is 100%
Very frustrating but I got there!
glad you fixed it! ive tried three different firmwares and still nothing.
trying this one atm
G900FXXU1ANE2_G900FEVR1AND1_G900FXXU1ANE2_HOME.tar
oh and how long do they take to boot when there are sitting at the samsung glowing screen?>
I'm in UK and used what (I had to guess) was the best firmware.
I'll let you know which version it was when I get home tonight.
BUT I had all the problems with a single version and it eventually came good.
I read somewhere that overwriting a different core (from specific providers) with generic firmware, could lead to a world of pain until it gets full replaced... not sure if that's a good description (or has any fact to it) but it seemed to be re-loading and re-loading and re........ for ages, finally cracked it.
well mines booted now!but getting constant errors about samsung push!
If it'still booted, you'very made progress!
Push issues are mentioned elsewhere and can (eventually be sorted) but if you have a booted phone you should be able to get an over the air software update installed from the service provider....?!

Categories

Resources