Hey all,
Maybe someone can help me out.
Two weeks ago i installed andoid on my HTC HD2.
I used HPSL, radio 2.15.50.14, MAGLDR112 and NexusHD2-Gingerbread_V2.1_NAND. A few days ago, without any reason i got a white bootscreen and i still have it
What a did so far:
* New HSPL3, but the radio didn't connected anymore, error 270.
* A new MAGLDR, i reached 100% in a blink, but then an error 270.
* Using a SD with the original leoimg, i get a (00018003 radio fail) error after a few % and the update failed.
* task29, but again no connection. (after 5 min error 262)
* new USB drivers installed for windows 7 and i also tried it on an windows Xp computer.
So far i only reached my 4 colored screen with:
PB81100 HX-BC
SPL-2.08. HSPL 8G XE
0x05
CotullaHSPL 0x30
* The original rom was RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Last question, how can i check that the batttery is stil oke for flashing.
Anyone who has a clue what to do?
Thanks in advance.
greetz!
Rob
Mate, I think you´ve done everything. HSPL and Radio ROM versions correct etc.
Since I see more and more people reporting similar problems like you, I get the feeling that some Android builds might have some strange effects on Radio ROMs.
There are too many people with SPL and Radio ROM problems, eg. stuck in bootloader or at the white startup screen.
This didn´t happen at this pace before Android NAND.
Only 1 question though:
Did you try to flash the original ROM using RUU.exe, SSPL or LeuCustomRUU via USB, without having the SIM and the SD card inserted? In rare cases, either one or both were trouble makers...
EDIT: Second question:
What kind of SD card did you try? Bigger cards seem more problematic, too.
I used a 2 gb micro SD card to go back to the original Rom.
I didn't tried to go back to original ROM using USB, because of the connecting problems. So that i'm gonna do now. Any suggestions which to use best?
After your post i tried to the flash with (and without) the formatted sd and the simcard, unfortunatelly i didn't work.
For last your question i can say that connect your phone to PC when it is off. Then keep down "volume down" button and switch on your phone. You get 4 colored screen. On bottom you can see USB word. Let phone for minimum 1h. And you get more 50% charged battery.
After hour you can flash back to original rom or to MAGLDR and forward normally flash android nand. You dont need disconnect or switch off before flash your phone.
Hope helps.
@tictac0566
Thanks for the options!
I tried the options mentioned in question 1, the problem is the connection USB/Radio. SSPL seems to work, but after 1% again connection error.
After a few test it must be the radio.
I tried to flash only a new radio using LEOIMG, after 99% i get the same error as LEOIMG an original Rom (00018003 radio fail)
With HPSL3_PKG i also can't go back to SPL 2.08.000.
So the problem must be there.
Anyone has an idea?? Can i use another radio? If yes, than which?
Thanks!
Still no solution
Tried many things, still the radio is not working.
It could be also HPSL3, because i can't go back to spl 2.08 (or any other (h)spl with the app.
Anyone has an idea??
Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?
Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too
CrAzYiaN said:
Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?
Click to expand...
Click to collapse
Yes i did, this thread is official mine
It must be the radio or else HSPL3_PKG.
Do you have some options??
Thanks in advance!
tomar5e said:
Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too
Click to expand...
Click to collapse
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Thanks for the advice, but all the roms i tried i got a radio fail during flashing with leoimg.nbbh.
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried, but mine HD2 stays on SPL-2.08 HPSL.
I used HSPL3_PKG and HSPL2 in different but still SPL-2.08 HSPL.
Maybe there's where my problems are, but i als can be an corrupt radio.
Anyone an other way to back to SPL 2.08.000 or how to fix the radio?
Then your best bet is to flash with a goldcard
Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Yes i can get into bootloader. I have tried using MTTY task 29 to format the device then i searched on the HTC site for a compatible ROM. Turns out the only one that doesnt give a negative response when i type in my serial number is the ROM from Taiwan. Tried flashing that using the SD card method and the USB method. Sd card method hangs at 0% and i get a connection error in USB method. I have also tried the latest ROM from Dutty.
If a ROM is not compatible how do you know? Does it hang at 0% or does it finish loading and then wont boot from there.
I have even tried flashing just a radio with the same results.
kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried all different types of HSPL and even SSPL. From the bootloader screen i run the .exe from the computer and it goes through and says 'operation finished successfully'
But when i get back to the bootloader it still says the same HSPL, which is 1.66
Also to note when i power on the device i can hear a small 'click' from it. Could be much worse and be a hardware problem?
Still no solution.
Oke guys, thanks for answering my threat so far!
Still trying to get my HTC back to life.
Is it possible that my problem is in HSPL? (see attachments)
After the white screen i tried to reinstall HPSL 2, 3 and 1, but during the instal my HTC reboot (without the signal "We Hacked It"
I also tried different SD card for LEOIMG, still radio fail 00018003.
One thing i didn't tried is using a goldcard, i downloaded the app but i need a working HTC HD2 to make the card.
Anyone?
No you don't, there you go :
http://forum.xda-developers.com/showthread.php?t=874304
Goldcard is the old method to install a custom rom way before HSPL became popular
so if HSPL don't work then Goldcard wont as well but hey you can still try
I think its more of a hardware problem now since all attempts for software repair is not successful. I had the same situation as yours, white screen then radio fail, tried all solutions but still no luck
sameeeeee
i have the same problem 100%
i already try all these solution and no one is worked
however, some one told me that maybe the problem with the Flash memory of my HD2 because he already try to solve / or already solve such problem "but unfortunately he lost the tools he was used"
this tools is can check the memory and told which memory chunk is corrupted
please if any one know this tools or had it please posted it on.....
That app should be Task 29.
Related
I won't bother with the exact history of things but I'll tell you what's on the phone and what I can't get to work.
SPL-2.00. 10000 XE
Radio 2.06.50.04
ROM Leo lite 2.6 WE (21892.5.0.89)
Current ROM works until I try to do anything involving phone radio and then it just locks up. My radio is not up to date for this ROM I assume.
Trying to flash anything at all via LEOIMG microsd card does nothing but sit at the Loading.... screen with never any progress. (I have also tried this with a goldcard that somebody made me and I get the same error.) Have used both a 16gb card and a 2gb card, all formatted to fat32
I am unable to flash a new ROM or new Radio or get the SPL to allow any OEM ROM/SPL package to install via SDcard.
Trying to flash anything with the standard flasher tool and it never did anything but time out. SSPL used to work but now it does nothing but time out. I'm stuck on this ROM, can't change it and phone doesn't work.
What I would like to do is get HSPL back on it, the most current radio and the latest US T-Mobile ROM
If you can help me do this I will pay $25 for the person to help me get it off my phone. There is a chance my goldcard could have been made incorrectly, I don't know anything about them. I can pay you via PayPal or mail you a check, whatever works for you. All I can do is give you my word that I will keep my end of the deal. I'm a 44 year old family man and a department manager of a casino. I would really appreciate any help.
If I posted this in the wrong place please move it but I'm at wits end and just want my phone back to normal.
Edit: Just to be clear, the $25 reward is for getting the SPL 2.0 off of my phone and/or getting me upgraded to the latest radio so I can run the most current TmoUSA ROM properly.
the problem appears to be that you have slightly different hardware to every one else.
didnt realise you were having issues with sspl, that at least should work ok. by time out do you mean there sspl boot screen appears burt nothing else?
if so what happens if you disconnect the usb cable and plug it back in?
if it changes to usb then rerun the sspl without changing anything on the hd2
you could also try - and uninstall the windows drivers for the qualcomm cdma drivers or whatever they are called on you pc. and reconnect in boot loader to let them reinstall.
SSPL used to work, it stopped working after I flashed a newer rom to play with. When I use the SSPL it goes into the bootloader screen just fine, then I hear the USB disconnect sound and the SSPL program times out quickly with the exit button citing no connection.
I have 2 x Windows 7 64 bit computers, 1 x Windows 7 32 bit and one XP 32 bit computer. I get the same results on any of them. All after the most recent ROM upgrade.
I have not tried running SSPL from boot loader screen, did not know that was possible. Trying that now. Just need to download a known working ROM.
If that works I'll be back in the same boat as before, stuck with 2.0 SPL and 2.06 radio. I want that SPL 2.0 off my phone badly.
OK, trying SSPL from the bootloader screen got me a little further towards ROM flashing. I can see the htc on the black screen with the progress bar. It now sits at 0% with no movement indefinitely.
Going to try another ROM and see if I can get the ROM installation to actually begin.
If you still haven't tried it do this: start SSPL when you hear the USB disconnect sound remove the USB cable (either from device or PC) and then connect it again! this should allow the SSPL to enter USB mode! I've had similar problems long ago and this trick was doing the job! Not sure that it will help you but just a thought!
Newb here:
I had something similar. I installed HSPL and everything was fine thereafter. The radio wouldn't flash any other way, in fact it would disconnect like you said, or if I manualy took the phone to boot loader, it would stick at 0%.
There is a HSPL thread stickied in the ROM section and I believe it explains how to remove it if you need to "re" validate your warranty. Although reading once more it does say you need SPL 1.42 to get it to install.
Have you tried installing an official HTC ROM downlaoded from their site? This will take you back to the original SPL version 1.42...
I don't have HSPL on my phone, I have SPL 2.0 Nothing is out currently to remove a later SPL with the exception of flashing an OEM full package ROM through the sd card but that doesn't work for me.
I have tried multiple roms now using SSPL from the bootloader screen and none will move the progress bar past 0%
Still stuck. : - (
Have you tried to hard spl it? If I missed it in your post, I apologize.
Not in a long while, I should try again I guess but I was totally under the impression that HSPL will error all the time unless you have SPL 1.42 installed on the phone.
Edit: Just tried and it errors because SPL 1.42 is not on the phone, it's the only SPL that HSPL works on as far as I know.
balane have you tried installing a stock rom from your SD card? this would revert the spl back to 1.42 and allow you to then flash HSPL (I think, almost certain) but you said you cant do anything with the sd card, have you tried that? have you tried with different SD cards? also have you made sure that it is formatted to FAT32?
Another thing you could try if all else fails: MTTY, look at the MTTY thread by MystikGenius, its stickied in the rom development section, this will format your phone from which you can then try to flash from usb or sd. I would recomend trying to flash from SD which then again may revert your spl.
Im going to school now so I wont be able to help you anymore 8 or so hours, but PM me later if your still stuck.
I may be wrong but from what I read in the threads I thought it was not possible to go back to anything under 2.0 once you flash a 2.0 SPL. You can't flash back to 1.48 or 1.66. You might be able to flash the new TMOUS which is in the 2.0 SPL range.
Yes, I've tried dozens of stock roms from the sdcard, every one I could find in fact and they all hang at the Loading... screen. As stated in the op, I used two different cards both formatted to fat32. I guess I could try a third card, not sure if it's worth a try or not.
I looked at MTTY but that doesn't do a thing with SPL and my SPL is the root of my issues.
Update: I finally did find a ROM I could get flashed via SSPL. It took like 3 tries to get the progress bar going but it did get installed. I can't even recall what series of events got it to go but at least my phone turns on and works.
Still the same SPL and radio though. No change there.
bobsbbq said:
I may be wrong but from what I read in the threads I thought it was not possible to go back to anything under 2.0 once you flash a 2.0 SPL. You can't flash back to 1.48 or 1.66. You might be able to flash the new TMOUS which is in the 2.0 SPL range.
Click to expand...
Click to collapse
I could have swore I read some people who were able to get the SPL 2.0 off their phones but I could be mistaken. I'm actually ok with any SPL as long as I can sspl different ROMs. I just want to get the radio current so I can run the latest TmoUS ROM, I would totally and 100% pleased with being able to update the radio. I have found now way to flash a more current radio.
balane said:
I won't bother with the exact history of things but I'll tell you what's on the phone and what I can't get to work.
SPL-2.00. 10000 XE
Radio 2.06.50.04
ROM Leo lite 2.6 WE (21892.5.0.89)
Current ROM works until I try to do anything involving phone radio and then it just locks up. My radio is not up to date for this ROM I assume.
Trying to flash anything at all via LEOIMG microsd card does nothing but sit at the Loading.... screen with never any progress. (I have also tried this with a goldcard that somebody made me and I get the same error.) Have used both a 16gb card and a 2gb card, all formatted to fat32
I am unable to flash a new ROM or new Radio or get the SPL to allow any OEM ROM/SPL package to install via SDcard.
Trying to flash anything with the standard flasher tool and it never did anything but time out. SSPL used to work but now it does nothing but time out. I'm stuck on this ROM, can't change it and phone doesn't work.
What I would like to do is get HSPL back on it, the most current radio and the latest US T-Mobile ROM
If you can help me do this I will pay $25 for the person to help me get it off my phone. There is a chance my goldcard could have been made incorrectly, I don't know anything about them. I can pay you via PayPal or mail you a check, whatever works for you. All I can do is give you my word that I will keep my end of the deal. I'm a 44 year old family man and a department manager of a casino. I would really appreciate any help.
If I posted this in the wrong place please move it but I'm at wits end and just want my phone back to normal.
Edit: Just to be clear, the $25 reward is for getting the SPL 2.0 off of my phone and/or getting me upgraded to the latest radio so I can run the most current TmoUSA ROM properly.
Click to expand...
Click to collapse
My English is not good. But I can help you. You can refer here ( in post 18&19) and use google to translate language :
http://www.pdaviet.net/showthread.p...KHI-UP-ROM-TMOUS-BẢN-TEST-(2-07)-BẰNG-THẺ-NHỚ
I have successfully repaired (with any Goldcard ) HD2 damaged when the flash rom TMOUS with memory card . And now can flash with any rom that is the base rom from 2:07 or higher (with SSPL)
Sorry for my bad English
balane said:
I don't have HSPL on my phone, I have SPL 2.0 Nothing is out currently to remove a later SPL with the exception of flashing an OEM full package ROM through the sd card but that doesn't work for me.
I have tried multiple roms now using SSPL from the bootloader screen and none will move the progress bar past 0%
Still stuck. : - (
Click to expand...
Click to collapse
No it won't be SSPL as we know it, the HTC stock ROM you can download from their site (Google "HTC HD2 DOWNLOAD") will use it's own method of getting onto your device and will reload SPL 1.42 for you. Although apparently you may not be able to do this with SPL 2. You say you have done it with a gold card, have you tried the stock rom downloaded from HTC via USB?
Otherwise, pester bepe for when the HSPL comes out that is compatible ywith SPL 2!
ancola66 said:
My English is not good. But I can help you. You can refer here ( in post 18&19) and use google to translate language :
http://www.pdaviet.net/showthread.p...KHI-UP-ROM-TMOUS-BẢN-TEST-(2-07)-BẰNG-THẺ-NHỚ
I have successfully repaired (with any Goldcard ) HD2 damaged when the flash rom TMOUS with memory card . And now can flash with any rom that is the base rom from 2:07 or higher (with SSPL)
Sorry for my bad English
Click to expand...
Click to collapse
Will not allow me to even read the forum because I'm not a member, can you copy paste the pertinent information here please?
You can use ANY goldcard???
mwillems2 said:
No it won't be SSPL as we know it, the HTC stock ROM you can download from their site (Google "HTC HD2 DOWNLOAD") will use it's own method of getting onto your device and will reload SPL 1.42 for you. Although apparently you may not be able to do this with SPL 2. You say you have done it with a gold card, have you tried the stock rom downloaded from HTC via USB?
Click to expand...
Click to collapse
I've tried multiple OEM HTC Roms and all give the same stuck at Loading... screen. Is there a specific HTC oem ROM you can recommend I try?
balane said:
Will not allow me to even read the forum because I'm not a member, can you copy paste the pertinent information here please?
You can use ANY goldcard???
Click to expand...
Click to collapse
YES ! You can use any Goldcard. I write instructions for you but my very bad English
balane said:
I've tried multiple OEM HTC Roms and all give the same stuck at Loading... screen. Is there a specific HTC oem ROM you can recommend I try?
Click to expand...
Click to collapse
When you say oem, do you mean just the nbh with which you have tried to install using tools or the self extracting exe that HTC provide? I'm just asking cos to me, oem means it comes without all the manufacturers extras.
I've always been under the impression that the only way to downgrade an SPL was to install a complete OEM package ROM/Splash/Radio/SPL as a LEOIMG.nbh from the root of the SD card. I've tried dozens of these both from US based ROMs and abroad. None of gone past the Loading.... screen. I've tried 1.42 and above ROMs, no luck with any.
Hi every one. I had a problems with HD2, my original ROM was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another ROM, so I tride to flash a new ROM, did a Hardspl2 and now my HD is bricked, with triangle and no ROM also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of ROMs and no luck at least .... Triad also flash with original ROM via Micro SD no luck... Please help me!!!! URGENT!
prieditis said:
Hi every one. I had a problems with HD2, my original room was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another room, so I tride to flash a new room, did a Hardspl2 and now my HD is bricked, with triangle and no room also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of rooms and no luck at least .... Triad also flash with original room via Micro SD no luck... Please help me!!!! URGENT!
Click to expand...
Click to collapse
Firstly its "ROM" not "room".
What do you mean "with triangle" ??
Which HD2 do you have and which ROM did you try flashing?
Can you get into tri-color bootloader mode?
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
prieditis said:
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
Click to expand...
Click to collapse
your device is not bricked... get into bootloader and do a task 29 (LOOK IT UP)...
Then start from scratch... Magldr, then whatever ROM you want.
Can you explain me? Please step by step... Thanks in advance
prieditis said:
Can you explain me? Please step by step... Thanks in advance
Click to expand...
Click to collapse
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
prieditis said:
, my original room was with a lot of problems, it restarted without no reason and so on. ..with triangle and no room aURGENT!
Click to expand...
Click to collapse
... OK, no room = homeless!
If you can't pay rent, I'm afraid I'll have to ask you vacate the area.
Possible fix stuck bricked hd2 radio no rsa information
Please read the whole post first sorry about the mess it is my first post thanks to everyone here on xda who came up with everything i used to do this There is guides for this xda has a lovely list of tmous roms if you are on t mobile in the us http://www.xdafil.es/index.php?path=HD2/TMOUS/
i would start with the RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip
extract the .exe file if it has one than extract the RUU_signed.nbh from the .exe file using win war or 7 zip than rename it to LEOIMG.nbh and place it on a newly formatted microsd not a microsdhc and i had problems with anything over class 4
place it in your phone and hold the volume down button and power button as loading comes up let off volume down power button will start the flash(i was only able to do complete flashes in the freezer if not it would hang or get radio errors)
i also had a tmous which did not want to flash the radio i would get an an error and rsa fail it sounds crazy but i wrapped it in plastic and stuck it in the freezer for a while before and during the flash this was the only way i could install the radio and actually see rgd information on boot screen after this first one you will have an old test rom with an old spl you cannot change to hspl from here i also was not able to go straight to 2.10, i had to step up from RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip, to RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip the same way i did the first one,hard resetting after each one and let it open windows completely to know it is working. than i believe there is an hspl3 file somewhere out there with all thanks to DarkForces Team HardSPL3 by bepe and Cotulla i will try to attach it that will work with spl 2.02 wich you should now be on now you can download your radio in the master radio thread http://forum.xda-developers.com/showthread.php?t=611787
i also just renamed the ruu_signed.nbh to LEOIMG.nbh and ran through sd i seem to have problems through usb and i was trying to be careful with the radio
once you got the radio you want you could flash the rom preferably running task 29 before or get yourself magldr to install through nand i also stuck my laptop an the freezer with the phone to get wp7 completely installed i did all this mess with a phone that had a broken screen i think there is like thermal compound over the processor to the case that is not on right and overheats when not in the operating system like a crappy old laptop with its fans full of stuff trying to install xp. and while a stock rom was being installed the usb was pulled during the radio installation i hope this helps i belive i saw one post to stick it in the freezer out of everything that i think helped the most.i also notice i have to put it in the freezer at boot too sometimes or i will get a fatal hit error i think its just over heating..... i also have an hd2 which has never been opened before that i have never had to stick in the freezer it gets flashed quite abit right now running gingerbread on normal hd2 and wp7 dual boot android 2.2 on the one i had to freeze i hope this helps i was here for weeks reading reading i was stumped cus my first hd2 and g1 were so eazy i will update this post once i stop being lazy and open the phone again to replace the goop to see if that is the problem
Thank you for reading my jumble and thanks again to all you phone heads here on xda which without you none of this would be possible and i would not have wp7 and gingerbread on my hd2 : D
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
prieditis said:
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
Click to expand...
Click to collapse
succesfull only one time, now i tried reflash an original rom once again and no results, still stucked in triangle. It's a first time when something like this happens
P.S. Sorry for my english..
spyderman33 said:
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
Click to expand...
Click to collapse
no luck at all I tried it once and have succesfull rom update, but it stucks when started with HTC logo, i tried second time and still no luck. Please help me.. all the time now also for original rom it says that this room is not for that device
original rom
you have to find the original rom shipped with your phone like here i am tmobile usa roms you have to find your carrier and country and start with one of the first ones i started with my second one RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip and i kept getting stuck screens when it was hot turn it off maby find some silica gel (lil rocks that come with everything to absorb water) wrap it in plastic and throw it in the freezer does the back of the phone get real hot during flash
i have shipped original rom, still no luck
not the newest one
you need one of the first test roms this was the only way i got mine to work i had to go from 2.02 to 2.03 to 2.05 hard resetting after each install making sure they completely went in what carrier are you and where are you
Still stuck?
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
stepthehen said:
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
Click to expand...
Click to collapse
Hi, thanks a lot. Only, SPL for original rom was 1.42000 is it ok to flash with 2.08.000 ? And why i should install MAGLDR 1.3 ? Thanks in advance,
Ok, now i dont understand anything. My original SPL was 1.42, i did Hardspl 3, after that tried flash original rom, process stuck on 96%, after that i tried once again stuck on 9% and says rom not compatible with device. And its like a hidden circle, my phone is acting like that all the time. I tried task29, tried all HSPL, also 1.4200, 1.66 and so on. Can anybody help me? my skype nick is martins.prieditis , maybe someone can assist me?
Ok now its fixed. I did a HSPL4, due to which original rom freeze on 0%, but 3.14 didnt start up on loading OS (white screen with HTC logo))or freeze on 99%. Than went back to shipped 1.42, stock room succesfylly flashed and did a SSPL_RUU. Now the only problem is that my LEO restarts when it gets hot. Any ideas how to fix it?
Thanks all for youre help (regarding my previous issue) !
Overheating??
As mrpoe stated in post 9, One of his phone had to be put in the freezer to be able to flash anything otherwise it will get hot and freeze.
Also the motherboard is most likely broken and you cannot get it to work without freezing or it will keep rebooting...
The best thing to do if you still have warranty is to Keep stock SPL and stock WM6.5 and return for warranty.
It will not function the same again.
My sincere apologies if this has been posted elsewhere (i can't find a thing and been looking all morning!).
I've ballsed up my HD2. Basically i tried to run sd card dual boot android thingy last night. Radio didn't upgrade as it should have and so anfroid didn't work either. So...today I tried downgrading SPL from 3.033 to 2.08.0000 so i could upgrade radio to be compatiable. To cut a long story short I used the downgrading post to do it and now i have upgrade rom error please try again. One positive note though....stuck on a lovely red green, blue and white screen (bootloader me thinks?) with spl showing as 2.08.0000.
Now....I thought i was slightly above average in terms of genereal public geeky know-how but this has certainly humbled me. I've been through the O SH*T I've bricked it (both me and the phone) and through dam....my wife will kill me, i'm now at denial thinking it will magically sort it self out (which it won't).
So please, apologies for the essay....can some help me out. Please go slow as I really can't do things without step my step instructions.
In a nutshell: can't get past bootlaoder and i wanna go for a poo because of it.
HELP!
Smiley
I have no idea about HD2 but most smartphones would have a recovery option in its PC software suite. Try that if all else fails.
nibras_reeza said:
I have no idea about HD2 but most smartphones would have a recovery option in its PC software suite. Try that if all else fails.
Click to expand...
Click to collapse
I'm not sure that would work, plus i don't think I've got the disc (had hd2 for 18months now).
It says:
HX-BC
SPL-2.08 0000 8G XE
MicroP (LED) 0x05
MicroP(TOUCH) 0x30
Tried loading standard rom from htc site but after 1% it crashes.
Crashing your phone is definitely a cure for constipation!
HELP!!! Anyone? Tried HSPL and it didn't work, still stuck at bootloader. Have a bricked it?
You flashed the stock 2.08 SPL instead of Hard SPL. That is why it will not let you load another ROM.
Wil Badger said:
You flashed the stock 2.08 SPL instead of Hard SPL. That is why it will not let you load another ROM.
Click to expand...
Click to collapse
Thanks for replying but, pardon my ignorance (i'm not very good at this stuff), how do I resolve this issue? is stock ROM the one that comes with the phone? I've ried putting different SPL through HSPL but stays at 2.08. What am I doing wrong?
thanks in advance
SMILEYSINGH said:
Thanks for replying but, pardon my ignorance (i'm not very good at this stuff), how do I resolve this issue? is stock ROM the one that comes with the phone? I've ried putting different SPL through HSPL but stays at 2.08. What am I doing wrong?
thanks in advance
Click to expand...
Click to collapse
The SPL you put on there is stock, meaning locked so you cannot flash custom ROMs.
You need to run HSPL4 again, and flash HSPL 2.08 NOT SPL-2.08 0000.
THEN you can flash whatever the hell you want
Don't flash HSPL 3.03 unless you plan to just use a 3.14 based windows mobile ROM.
just tried that and it stops half way through process and put spl 20.8 0000 on it even though i asked for HSPL. whats wrong with it? any ideas? again, i appreciate your help. is this anything to do with radio (????what is radio??? lol)
now all hspl does is not do as i say, whatever i pick whether it be 2.08 stock and 2.08 hspl (or their 3.03 counterparts) it show spl of 2.08.0000.
to be honest i just want my trusty winmo back so i can make calls, to hell with android (for the moment lol)
Is it regular or tmous?
Regular - 2.x spls arent stock for regular, only tmous uses 2.x as stock, so that may be havjng an effect, though it shouldn't,,,,,
Run hspl2 (note that's hspl2) and choose 1.66.0000
If that takes ok, then go to htc.com and find a rom that your serial allows you to download and flash it.
Tmous - get latest rom from t-mobile.com and flash that. If usb flashing doesn't take try sd card flash.
In both cases if still no luck, try goldcard, pm me an emaik address and your cid and I'll make you one.
You could also try the "chill phone in bag in fridge for half hour before flashing" trick, which if it works means you have overheating issues.
Spl - any spl ending 0000 is a factory spl andwill not allow flashing except that phones stock rom.
just pmed you, dunno if i did it right, hopefully you got it. Unfortunatley hspl2 didn't work either, still 2.08.0000 on there. Can i work with this in any way? ie can i load another rom on rather than revert back to htc rom if it easier? This all began with wanting dual boot android/winmo but its gone belly up lol, still i suppose there are ppl that have bricked phones whch are worse off.
I don't even know how to load another rom! i'm the noob of noobs!
From PM
SMILEYSINGH said:
I'm afraid that hspl2 didn't sort it out either, still shows spl 2.08 0000. Although it does say successful, when booting up it says failed and reverts back to bootloader. Should i be pressing any buttons while it boots up (i'm not - only vol down key when i need usb port to work).
Could i have a goldcard please? What is a goldcad and how do i use it? I haven't a clie as you can see. MY email is ***********.
I really appreciate your time, I understand you must be busy.
Thanks again
Smiley
Click to expand...
Click to collapse
ah i was afraid of it not working, , next i would suggest try hspl4, choosing 3.03.hspl or 3.03.0000, though again, i suspect the same thing,,, no change.
No real answer as to why it does that, i suspect a bad nand (memory) block, perhaps some memory flag that needs to be set but gets corrupted, , or something.
All i can suggest is trying hspl2,3 and 4 to try and change the spl to anything, , you have a regular hd2, so theres no problem, it should take any spl.
Goldcard is basically a magic sd card that makes the phone think it is in the factory, and lets you flash any STOCK rom from any region and carrier, and the phone will accept it as its correct rom. You can make them from any 4gb or smaller sd card, but i need teh CID (unique serial) of that sd card to send you the image which you write to the disk.
Problem is, getting the CID, , if you have another windows mobile phone you can use for 5 minutes that takes sd cards) then you are laughing, if you don't then you may be in trouble (although again, this is pretty unlikely to work if you really do have the stuck spl/radio problem, so if you cant make a goldcard dont lose any sleep)
Anyway, if you can get hold of a running winmo phone and connect it to your pc, then have a read HERE
http://samsamuel.co.uk/news.php?id=8
If you cant get hold of a winmo phone, then you will have to google on how to find sd cid without winmo phone, , , ,get ready for an evenings reading and frustration!
SMILEYSINGH said:
Can i work with this in any way? ie can i load another rom on rather than revert back to htc rom if it easier?
Click to expand...
Click to collapse
No, only stock roms will flash on 0000 spl's.
your phone, if acting normally, should always take the correct stock rom, but i have myself had issues flashing a correct stock rom when i left spl as 2.08.0000, until i downgraded to spl 1.66.0000, however the dowbgrade worked, whereas yours isnt taking.
As for which rom should always flash, go HERE and the second one down is t mo UK. If your serial gets rejected when you try to dfownload it, then its not the correct rom for that phone.
Download that, and rename teh file from filename.exe to filename.zip, then open the zip, inside is a bunch of files, one is called RUU_signed.nbh, extract that and rename it to leoimg.nbh and put it on your sd card (4gb or smaller, formatted FAT32) and reboot your phone into bootloader, where it should start to flash.
thanks for all your help.
At the moment its stuck on loading...has been for 15min, i think i'll reset it. I did manage to get it on another spl earlier this afternoon but it was 3.03 and i didn't think that was any good for me so changed it back. i'll keep trying to get a hspl on it, i take it that after that i can put any rom on it (cooked).
I'll try my wife's touch and see if i can make a goldcard.
Thanks again, let you know what happens.
jusr reset it and spl 1.66 is on there but only flashes up for a second before a white loading scren comes up. reset it a few times after that and still no joy. htc rom won't connect to it!
its working! the sd card was still in the phone and i had put something on there this morning (think it was a radio or something which caused loading screen to occur) windows just lkoadiong now, hopefully it will work. I'm still up for android dual booth tho lol. if this all works then i think i might wait. Samsamuel, i really appreciate your help in all this!
Thanks again!
Smiley
ps anyone readinf this...if in doubt just keep trying hsdp until u can do it in ur sleep, i must have done it 50 times today
Ah yea, leaving an inage on the card,,, bet you don't make that mistake again, hehe.
I've been searching for over 20hours around the internet for any solution to the so dreadful White Screen of Death in HD2.
This is due to a Radio Rom incopatible with the device. May be called Radio Brick! Lol
Well, it's truly desperating, as no method tried works!
The phone as soon as it's turned on just shows a white screen, no letters, no nothing.
Happened when I - dumbly - flashed a incompatible radio rom...
It has happened to a lot of other good people, but no solutions yet arrived to the internet!!!
In my case, I have hspl 2.08, and can perfectly access to bootloader, but flashing anything through SD does NOT work.
WHAT I'VE TRIED:
-flashing stock rom from HTC site, but when it comes to the radio part... UPDATE FAILED!
-tried a method here in XDA that solved a case like this but nothing... when it comes to flashing the radio, it always fails
-tried downgrading HSPL to SPL or to another version of HSPL.. curiously, the process says it was sucessfull but it changes nothing.. when i go to bootloader again the version is the same, no matter what kind of version I select...weird!
-nothing flashed through RUU works because comunication fails after 5min at 0%
-task 29 - does nothing
-changing rom/radios - always gives an error in radio update
I'm really, really, REALLY desperate, and I believe i'm not the only one in this situation!
Does someone have a brilliant idea on this?
I got it working again a couple of times but then it starts freezing after 10 hours and then i get again the whitescreen..
Now its stuck at bootloader i can't get in magldrboatloader does some1 known how i get into magldr because than i can flash another rom because in boatloader i can't flash
Hello,
I also have same problem I also cannot find a solution, Hope somebody can help us.
try j-tagging your devices !!
also it may be a hardware issue !!
good luck !!
Are you sure flashing through SD isn't working? Format the SD card new as FAT not as FAT32. And try to rename the the nbh file with into LEOIMG.NBH . Flash through a SD not a SDHC. Try this things, if they aren't working maybe j-tagging fix it.
Brain in a Nutshell said:
Are you sure flashing through SD isn't working? Format the SD card new as FAT not as FAT32. And try to rename the the nbh file with into LEOIMG.NBH . Flash through a SD not a SDHC. Try this things, if they aren't working maybe j-tagging fix it.
Click to expand...
Click to collapse
Can you send some tutorials. Because i dont know were to start and how..
I saw many people have this problem but there is no clear solution how they fixed it because they didnt gave feedback that it worked. Does some1 know how to fix this. [Desperate]
Slagers said:
I saw many people have this problem but there is no clear solution how they fixed it because they didnt gave feedback that it worked. Does some1 know how to fix this. [Desperate]
Click to expand...
Click to collapse
you'll have to try flashing your device again and again !?
but i think j tagging is the best option for this problem !! !!
you can go to the original htc store if you have not flashed hspl !!
(flashing hspl voids warranty !) !! also try to stock spl to 1.42.0000 by using hspl2 !!! http://forum.xda-developers.com/showthread.php?t=611433
if the bootloader screen (the three color screen) show 1.42.0000 spl then u can show it to the official htc stores !!
else
contact a local repair shop and try to jtag !!
may help !!
good luck !! !
So there is no fix i can do at home like flashing a specific rom or something else?
if the bootloader screen (the three color screen) show 1.42.0000 spl
Click to expand...
Click to collapse
Or 1.66.0000 or 3.03.0000
The best thing you can do is update the kernel version. I haven't had a WSOD for more than half of year.
The only kernel I've had this problem with was a rafpigna kernel on a sense rom. It was a build made in the first trimester of this year.
SPL-2.08. HSPL
I can flash it back to the normal rom from windows mobile. But i want a android version maybe some1 know a good rom and radio thats stays good?
nemuro said:
The best thing you can do is update the kernel version. I haven't had a WSOD for more than half of year.
The only kernel I've had this problem with was a rafpigna kernel on a sense rom. It was a build made in the first trimester of this year.
Click to expand...
Click to collapse
What kernel version you use now? and what rom and radio? So i can do the same things you did.
Can you put the link were you downloaded the kernel and rom and radio please. Thanks in advance nemuro!
You have all information in his signature.
Radio 2.12.50.02.2
ROM Redux2
Kernel Tytung (Redux2 have Tytung 12.4 by default)
how about hardware reset with pressing 3 keys at the same time?
Let me explain whats happing me all the time:
First my phone freezed up all the time and after a couple of weeks I got the [wsod] I can boot into bootloader (3 color screen) there I can flash it back to the original stock (WiMo6.5)
But I want android for my whatsapp and I like android. So I put maglder 1.13 on my phone. Then I tried android NAND flashing this worked but afther 10 hours my phone is off and I got the [wsod] again. I flashed my radio first to 2.15 but didnt help I tried this 2 times.
Yesterday I flashed my hd2 I followed a guide for android sd flashing I put the radio 2.12 on my phone and a old rom. I flashed it with haregt.exe it worked for 10 hours again then boom [wsod]
Im realy desperate, have some1 fixed this problem by himself already?
Did you try to run winmo for a few days? If you have problems even with stock OS most probably is hardware issue. If everything is OK running winmo then try fresh install (task29, radio, magldr, predefined recovery,ROM) of this ROM:
http://forum.xda-developers.com/showthread.php?t=1395049
For me works perfect.HD2 EU Radio 2.15.50.14
Petricanu said:
Did you try to run winmo for a few days? If you have problems even with stock OS most probably is hardware issue. If everything is OK running winmo then try fresh install (task29, radio, magldr, predefined recovery,ROM) of this ROM:
http://forum.xda-developers.com/showthread.php?t=1395049
For me works perfect.HD2 EU Radio 2.15.50.14
Click to expand...
Click to collapse
Oke im trying stock rom for a few days, I keep this thread updated if it worked or failed.
Slagers said:
Oke im trying stock rom for a few days, I keep this thread updated if it worked or failed.
Click to expand...
Click to collapse
So, it means WINMOB is working all days ok?
If no, what is the issues with WINMOB?
Taco123 said:
So, it means WINMOB is working all days ok?
If no, what is the issues with WINMOB?
Click to expand...
Click to collapse
No I cant install WinMo anymore still white screen of death if im back from work Im gona try to install WinMo again on my HD2 hopefully this time with more luck
I go into bootloader than install a stock rom from htc site than installed till 100% than I get an error that the image file is incorrupt?
Any ideas?
Hello people, I have been going through threads and threads regarding similar problems, but having tried and failed with so many strategies, I will have to bother you all.
So the thing is I was using a CM Jellytime MOD (data on ext) in my HD2, and having frequent hangs and freezes that I thought were linked to LCD malfunction, so I ordered a new screen and digitizer to see if I could save the device. Unluckily, just before these arrived, the HD2 suffered one final freeze, after which every soft reset would give the white blank screen and nothing else. I thought that maybe I should task29 the device and re install the ROM. The bootloader can be still accessed and I re-flashed HSPL with no problems.
But I cannot get to Magldr, as you can imagine, as there is no way to go through the white blank screen. Every time I try to re-flash either the radio (2.15.50.xx), Magldr, or even task29, I get "update errors", and no changes. I tried both using the specific utilities or the NANDtoolkit, to no avail.
I even tried MTTY, which seemed to go well, but did not bring any changes to the situation. It is still the same.
This is my bootloader screen:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
CotullaHSPL 0x05
0x30
Any other info that you think may help I will post it ASAP.
I have read that maybe the NAND has finally died, but I'm not sure and would not abandon the cause without some feedback. Can someone help with this? I will greatly appreciate, I live in Argentina and I don't think I will be able to get another smartphone (I got this one from a good friend who bought himself another one) right now, or ever
If I'm lucky I may be able to sell the LCD and touchscreen replacement, ha.
Thank you all!
pd: sorry if I posted in the wrong thread but I was really confused with the whole subforum arrangement. I moderate a forum and I am aware of how painful it is to start moving threads around.
@leandrox :i recommend removing the sd-card if present, flashing hspl 2.08 again.
Then, flash radio 2.15.50 (even if you tried before, try again now). if that was successful, reflashing magldr should be the success.
Or else...
Also, try putting your hd2 in a freezer, sometimes there may be overheating problems from what i used to see
gilbert32 said:
@leandrox :i recommend removing the sd-card if present, flashing hspl 2.08 again.
Then, flash radio 2.15.50 (even if you tried before, try again now). if that was successful, reflashing magldr should be the success.
Or else...
Also, try putting your hd2 in a freezer, sometimes there may be overheating problems from what i used to see
Click to expand...
Click to collapse
Hello @Gilbert, thanks for helping with this.
I have tried each flash with the SD and the SIM out, as I have read around about both interfering with flashing. So I guess that's not the problem.
I will try the "pre-cooling method" and tell you how it goes.
Is there any chance I should remove HSPL before re-flashing it? Also, does the battery charge while connected in bootloader mode? Because I am afraid I will finally run out of power througout the try and error processes.
Thanks again.
leandrox said:
Hello @Gilbert, thanks for helping with this.
I have tried each flash with the SD and the SIM out, as I have read around about both interfering with flashing. So I guess that's not the problem.
I will try the "pre-cooling method" and tell you how it goes.
Is there any chance I should remove HSPL before re-flashing it? Also, does the battery charge while connected in bootloader mode? Because I am afraid I will finally run out of power througout the try and error processes.
Thanks again.
Click to expand...
Click to collapse
not sure about removing hspl... you can try that tho. as for battery, you're probably right. there's a possibility it runs out of power.
did you try flashing stock rom from sd or usb? (emphasizing on sd method)
gilbert32 said:
did you try flashing stock rom from sd or usb? (emphasizing on sd method)
Click to expand...
Click to collapse
I guess that would be the next wise step (and I'll do it with the right pre-cooling in the freezer).
Correct me if I'm wrong:
- I need a FAT32 (?) formatted SD.
- Then copy the official nbh to the root of the SD, renamed as "leoimg.nbh". (still looking for the correct download; maybe here o here?)
- Enter bootloader screen, with the SD on. After a little while, it should read "loadng" and the flashing can begin.
After this, hopefully, has worked, I should be able to:
- Reflash HSPL 2.08
- Reflash latest radio if needed.
- Reflash Magldr and Clk
- Install new Android ROM
... but I'm looking way ahead my actual hopes
EDIT: I could not download the ROM from any of the quoted sites. Maybe someone can indicate to me the right ROM from this list: http://shipped-roms.com/index.php?category=windows mobile&model=Leo
My model is the 576 RAM one.
leandrox said:
I guess that would be the next wise step (and I'll do it with the right pre-cooling in the freezer).
Correct me if I'm wrong:
- I need a FAT32 (?) formatted SD.
- Then copy the official nbh to the root of the SD, renamed as "leoimg.nbh". (still looking for the correct download; maybe here o here?)
- Enter bootloader screen, with the SD on. After a little while, it should read "loadng" and the flashing can begin.
After this, hopefully, has worked, I should be able to:
- Reflash HSPL 2.08
- Reflash latest radio if needed.
- Reflash Magldr and Clk
- Install new Android ROM
... but I'm looking way ahead my actual hopes
Click to expand...
Click to collapse
Correct. don't forget that the sd should be between 1 and 8 gb in size (that's what i remember, larger sizes could do weird stuff)
gilbert32 said:
Correct. don't forget that the sd should be between 1 and 8 gb in size (that's what i remember, larger sizes could do weird stuff)
Click to expand...
Click to collapse
Thanks Gilbert! now I have work for this evening. Tomorrow morning I'll let you know how it went.
But I could not download the ROM from any of the two sites I quoted above. Maybe you can help me choose the right ROM from this list: http://forum.xda-developers.com/showpost.php?p=46839373&postcount=837
My model is the 576 RAM one.
leandrox said:
Thanks Gilbert! now I have work for this evening. Tomorrow morning I'll let you know how it went.
But I could not download the ROM from any of the two sites I quoted above. Maybe you can help me choose the right ROM from this list: http://forum.xda-developers.com/showpost.php?p=46839373&postcount=837
My model is the 576 RAM one.
Click to expand...
Click to collapse
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe this is the one i used IIRC
Ok @Gilbert, here's the update. No good news so far.
I tried flasing the mentioned official ROM from SD card and I get the "Update terminate / Update failed" message when installing. I also tried with a custom RUU but I got the same message.
I have been reading this thread where some guy apparently had the same problem and fixed it:
"After that I made a new goldcard using Duttys Leo Sense 2.5 Multi-Lang. "
http://forum.xda-developers.com/showpost.php?p=5384679&postcount=68
but I cannot understand what this actually means. I downloaded the mentioned Dutty ROM but it is a cab file that I don't know how to flash to the HD2.
I still have a tiny hope that the phone may actually come back to life. Again, thanks a lot for helping!
leandrox said:
Ok @Gilbert, here's the update. No good news so far.
I tried flasing the mentioned official ROM from SD card and I get the "Update terminate / Update failed" message when installing. I also tried with a custom RUU but I got the same message.
I have been reading this thread where some guy apparently had the same problem and fixed it:
"After that I made a new goldcard using Duttys Leo Sense 2.5 Multi-Lang. "
http://forum.xda-developers.com/showpost.php?p=5384679&postcount=68
but I cannot understand what this actually means. I downloaded the mentioned Dutty ROM but it is a cab file that I don't know how to flash to the HD2.
I still have a tiny hope that the phone may actually come back to life. Again, thanks a lot for helping!
Click to expand...
Click to collapse
then, try making a goldcard, and flashing a stock .nbh
for info about creating a goldcard, you should google it, i did recently and it was a bit harder then first time i did it (3 years ago)
gilbert32 said:
then, try making a goldcard, and flashing a stock .nbh
for info about creating a goldcard, you should google it, i did recently and it was a bit harder then first time i did it (3 years ago)
Click to expand...
Click to collapse
OK. Back to work then.
I will follow this tutorial. But I see I need an ActiveSync/MobileDeviceCenter connection. I don't think you can do that when you have no OS on the phone, right? Can I do this while in the bootloader?
Should I take any additional precautions attempting the process from W8-x64?
EDIT: It seems I need another phone to put the microSD on so I can get the correct CID with RevSkills (apparently you need the device to be connected through the MobileDeviceCenter or it fails). Then I may be able to ask someone else to get me a goldcard for said CID.
leandrox said:
OK. Back to work then.
I will follow this tutorial. But I see I need an ActiveSync/MobileDeviceCenter connection. I don't think you can do that when you have no OS on the phone, right? Can I do this while in the bootloader?
Should I take any additional precautions attempting the process from W8-x64?
EDIT: It seems I need another phone to put the microSD on so I can get the correct CID with RevSkills (apparently you need the device to be connected through the MobileDeviceCenter or it fails). Then I may be able to ask someone else to get me a goldcard for said CID.
Click to expand...
Click to collapse
I remember there being tutorials for making a goldcard, that need to have a microSD adapter only, no other device, and others that tell you how to get cid from an android phone.that doesn't require PSAS like in the tutorial you're following
gilbert32 said:
I remember there being tutorials for making a goldcard, that need to have a microSD adapter only, no other device, and others that tell you how to get cid from an android phone.that doesn't require PSAS like in the tutorial you're following
Click to expand...
Click to collapse
I got an adapter I can put in my old PDA and get the microSD CID. @Gilbert, can you prepare Goldcard images? In the tutorial there are some users mentioned that are supposed to do it, can you recommend any of them so I can ask them for it? Thanks in advance
leandrox said:
I got an adapter I can put in my old PDA and get the microSD CID. @Gilbert, can you prepare Goldcard images? In the tutorial there are some users mentioned that are supposed to do it, can you recommend any of them so I can ask them for it? Thanks in advance
Click to expand...
Click to collapse
making goldcard is easy...
i remember getting cid and writing it reversed to http://huygens.hoxnet.com/goldcard.html (choose reversed cid iirc), downloading goldcard.img, opening sd with some hex editor (hxd i recommend) and writing goldcard.img content to it
you should read the tutorials available online, as what i said could be a lot wrong
gilbert32 said:
making goldcard is easy...
i remember getting cid and writing it reversed to http://huygens.hoxnet.com/goldcard.html (choose reversed cid iirc), downloading goldcard.img, opening sd with some hex editor (hxd i recommend) and writing goldcard.img content to it
you should read the tutorials available online, as what i said could be a lot wrong
Click to expand...
Click to collapse
I have tried to flash the phone with the Goldcard through this method. I am wondering wether I should expect something different after the bootloader starts, because I just get to the same point as I did when trying to flash it without the Goldcard, and getting the same failed "update terminate / update fail" message. Maybe I did not prepare the Goldcard well. Or maybe the phone mainboard ROM/NAND is simply ruined :crying:
I have to assume that the radio must be bricked. From what I read, this is the only thing that can actually brick your device when you still can get to the tricolored bootloader. Everytime I try to flash a ROM, it fails while flashing the Radio, so there has to be a hardware problem that prevents it. I still wonder how that happened.
I was running JellyTime, and then all of the sudden the phone froze and then just didn't turn on again (blank white screen). Can overheating ruin the NAND or ROM? Should I consider this battle as lost? I am so disappointed...
I read about one user who concluded that all you can do is flash a ROM with no radio, and keep the phone only as an Android device (no phone use). He told me I should get a dev or cooker to cook a radio-less ROM so I can do that. Does anyone know if there's a ROM like this I could use?