Database Users

Can't access to bootloader !!

Hi all !
I can't enter the bootloader screen (screen with blue, green and red stripes) by pressing the volDown key after a soft reset. The phone simply boot on the rom and don't let me see the desired screen.
Is someone can help me to retrieve access to the bootloader screen ?
Radio 2.10.50.8
ROM EnergyRom GTX [13th may 2010]

it shuold be as simple as holding down vol key when powering it on...like you are doing.

u really shutted it fully down and powered on again? or just softreseted via software?

I have tested the two solutions ... I also turn off the device for one day and turn it on pressing the volDown key ... the result was the device booting normally !

Fl3eK said:
I have tested the two solutions ... I also turn off the device for one day and turn it on pressing the volDown key ... the result was the device booting normally !
Click to expand...
Click to collapse
mmh.. and if u want to hard reset ur phone? i mean.. when u press both, volume up and down at the start.. does atleast the hardreset screen appear?

No It change nothing ... I really can't access this screen anymore. I try also to upgrade to HSPL 2.X but the issue persists

Oo thats weird.. for what do u need the screen anyway?
i would flash a new rom maybe.. so the prob could be solved that way, but i really dont know if that will help >.<

try it with the battery cover off to get a better press
power off
press and hold and keep holding vol down
press and release power KEEP PRESSING VOL DOWN
only release vol once three colored screen shows.

samsamuel, I flash my HD2 more and more but since I test the radio 2.10.50.XX, the device just boot normaly and it not let me enter the bootloader screen (I keep the volDown key during booting after turn on the device like you said)
Darksorrow, I need to get back to radio 2.08.50 because the 2.10.50 sucks my battery very quickly ... :'( I'll try to flash the device with an other ROM ... with luck It could give me back the access to bootloader ...

the rom can't affect the bootloader in the same way that your installed operating system on your pc can't affect the bios.
even if you wipe the rom completely you can still enter bootloader.
anyway best of luck.
edit - in using same radio as you.

samsamuel said:
the rom can't affect the bootloader in the same way that your installed operating system on your pc can't affect the bios.
even if you wipe the rom completely you can still enter bootloader.
anyway best of luck.
edit - in using same radio as you.
Click to expand...
Click to collapse
Thanks for the information and after flashing I understand that the bootloader still unavailable by pressing down the volume down button ... Is it possible that this was and hardware problem even if volume keys works well in Sense?

Fl3eK said:
Thanks for the information and after flashing I understand that the bootloader still unavailable by pressing down the volume down button ... Is it possible that this was and hardware problem even if volume keys works well in Sense?
Click to expand...
Click to collapse
Its possible, but unlikely.
I dont mean to sound like i dont believe your results, but i cant help the feeling that you arent doing it right.
Every post so far where someone couldnt enter bootloader / start a hard reset has been down to the order of pressing and the length of the press.
Its usually that they are
1 - pressing and holding both power and vol
or
2 - releasing vol down when they release power
or
3 - not pressing vol hard enough (this is where the battery cover off helps, it allows the button to press more firmly.)
or
4 - pressing power before they press and hold vol.
all of which will fail to enter bootloader.
ill repeat the process, just for clarity.
power off the phone
press hold and keep holding 'vol down'
tap and release power BUT keep vol down pressed
release vol down when the three coloured screen appears.
any more than that i cant suggest, sorry.

Here you go. Give this a shot. Run the cab on your device and there will be a shortcut in your start menu to take you to bootloader

It works fine. Thank you.

zelendel said:
Here you go. Give this a shot. Run the cab on your device and there will be a shortcut in your start menu to take you to bootloader
Click to expand...
Click to collapse
Thanks a lot this work for me too !
@samsamuel : I understand the way you explain me Even if I kept the vol down touch after powering the device I just see the device booting on ROM ...

I have one more question, do you think I can perform a format (with MTTY) considering the fact that I can't access to bootloader at startup ? I hope this work but the risk is that I can't never install a ROM after formatting if I still can't access to bootloader by pressing volume down at startup ....

Thanks Zelender, the file works wonderfully. ...and yes, I'm sure I was using correct procedure to enter bootloader as I had done it before.

I have a similar situation, but I have a Nexus One. I know this is not the area for the N1, but this is the only place where someone is having the same issue of not being able to go to the bootloader. I press vol down while hitting power button. This would always give me the boot loader menu, but instead it just boots to the OS.
Any way I can regain access to the bootloader, because my os is messed up and my radio isnt operating.
Thanks

Hum ... I just process an task 29 via MTTY and the result is .... "phone sent for repair" so for those who have the problem, DO NOT EXECUTE TASK 29 or you'll have a blank phone and you'll can't install new ROM.

I can't return to winmo rom.
zelendel said:
Here you go. Give this a shot. Run the cab on your device and there will be a shortcut in your start menu to take you to bootloader
Click to expand...
Click to collapse
I've the same problem as Fl3ek : I flashed a nand android rom with magldr and I can't return to bootloader mode and I can't make a hard reset. The only thing working is magldr but only for flashing nand android roms (i tried 3 of them : they all work ).
Is there an APK like bootloader.cab ? Or a program to flash or activate bootloader in nand with magldr ?
I tried quick boot with bootloader option but it does'nt work.

Flashing WP7 without Volume Keys***STUCK NOWW!! HELP PLS

HI,
Is there a way to flash the new roms without the Volume rocker working. My phone was all good till i dropped it and the volume rocker has stopped working.
I ask tot he super minds...Is there a way to flash a rom if ones volume rocker is not working?
I looked at the ROM thread for WP7 and at one point you have to chose USB flasher via the volume key. If thats true and there is no other way then i cant instal WP7 ever..
************sigh**********
PLS help
EDIT:--- Now i am dead... installed radio....installed magldr and now cant select usb flasher mode. Damn.
Pls help

i dont think there is a way without volume down key...

How can i boot directly into boot loader without volume key??
has to be a workaround with all the smart ppl here.
XDA rulezzzzz....someone help me

if you don't have volume keys, you won't be able to change the volume in win phone :L

LOL
will do it via system sounds.....
BUT PLSSSS someone help me instal WP& without the volume rocker working

stuck badly now
Installed magldr and now ant choose the USB flasher mood.
Pls someone help me to get back or get forward...
or am i bricked?
Really worried

You need Enter boot software.
My friend Spike advised it to me long time ago so all credits go to him for finding it.
http://www.google.nl/search?sourceid=chrome&ie=UTF-8&q=htc+enter+boot+cab
Edit, but if you try WP7 you need to realise Enter boot won't work there so you can't go back.
Better to fix the volume keys.
yahya.hamid said:
How can i boot directly into boot loader without volume key??
has to be a workaround with all the smart ppl here.
XDA rulezzzzz....someone help me
Click to expand...
Click to collapse

Laurentius26 said:
You need Enter boot software.
My friend Spike advised it to me long time ago so all credits go to him for finding it.
http://www.google.nl/search?sourceid=chrome&ie=UTF-8&q=htc+enter+boot+cab
Edit, but if you try WP7 you need to realise Enter boot won't work there so you can't go back.
Better to fix the volume keys.
Click to expand...
Click to collapse
Thanks for that.
The only problem is that he's already installed magldr and AFAIK there's no way to get back to WM to run the cab, unless you know of a way back that doesn't involve using the vol keys?

You need an electronics dude (like me) or some experience on how-to de-assemble at least phones anyway if you succeed on de-assembling the phone all you have to do is using a tiny pin plug it inside the volume controls you should be able to press the pcb push button and not the outside plugin
If you cant do all of this ask a friend of yours (electronics) or take to phone shop hell do it for you in exactly 30 secs

no way ...
There no way to flash WP7 without volume key ... Many rom or tool offer you
the possibility to enter directly in bootloader but after flashed MagLdr you will be stuck because you will be unable to enter in MagLdr and unable to scroll down to choice 5 (usb flash). i know it because i have the same problem ....
yahya.hamid said:
HI,
Is there a way to flash the new roms without the Volume rocker working. My phone was all good till i dropped it and the volume rocker has stopped working.
I ask tot he super minds...Is there a way to flash a rom if ones volume rocker is not working?
I looked at the ROM thread for WP7 and at one point you have to chose USB flasher via the volume key. If thats true and there is no other way then i cant instal WP7 ever..
************sigh**********
PLS help
EDIT:--- Now i am dead... installed radio....installed magldr and now cant select usb flasher mode. Damn.
Pls help
Click to expand...
Click to collapse

Buttoms are messy / boot problems

Hello!
So the problem started today, when my phone got shutted down ( because battery was 4%.. ) and when i was able to charge it, this sh#t started.
So, some things first:
- I'm not able to get to the place ( phone off -> volume down and turn phone on ) where i could flash wp6.5 or do task29
- I couldn't enter into rom because it froze to the part where HTC is green with black background
- Rom worked with safe mode
- USB flasher doesn't work in malgdr
- Buttons are messy ( but i have now figured how they work )
- I*M NOT ABLE TO HARD RESET, when it says " press volume up to reset ", it does nothing. I have to take off the battery to get off there.
+ I'm able to go to AD recovery, and do anything there
+ I'm able to use USB MassStg
So what can I do? Or what should i do? This is really sad to me. I've flashed roms since March with great succes, but now I face a problem like this in normal use. So i'm pretty confused.
I'm able to take some video if you need it.
Not sure did i make it to the right section, but i hope i made.

Hey u said that your buttons are messy and you figured out how they work. can you tell me i they started working. coz my hd2 is stuck on htc logo screen and not going to bootloader after pressing the power and volume down key . ithink their some malfuncaning in volume down key......... plz reply fast
---------- Post added at 07:26 PM ---------- Previous post was at 07:07 PM ----------
keetsy said:
Hello!
So the problem started today, when my phone got shutted down ( because battery was 4%.. ) and when i was able to charge it, this sh#t started.
So, some things first:
- I'm not able to get to the place ( phone off -> volume down and turn phone on ) where i could flash wp6.5 or do task29
- I couldn't enter into rom because it froze to the part where HTC is green with black background
- Rom worked with safe mode
- USB flasher doesn't work in malgdr
- Buttons are messy ( but i have now figured how they work )
- I*M NOT ABLE TO HARD RESET, when it says " press volume up to reset ", it does nothing. I have to take off the battery to get off there.
+ I'm able to go to AD recovery, and do anything there
+ I'm able to use USB MassStg
Hey u said that your buttons are messy and you figured out how they work. can you tell me i they started working. coz my hd2 is stuck on htc logo screen and not going to bootloader after pressing the power and volume down key . ithink their some malfuncaning in volume down key......... plz reply fast
So what can I do? Or what should i do? This is really sad to me. I've flashed roms since March with great succes, but now I face a problem like this in normal use. So i'm pretty confused.
I'm able to take some video if you need it.
Not sure did i make it to the right section, but i hope i made.
Click to expand...
Click to collapse
Hey u said that your buttons are messy and you figured out how they work. can you tell me i they started working. coz my hd2 is stuck on htc logo screen and not going to bootloader after pressing the power and volume down key . ithink their some malfuncaning in volume down key......... plz reply fast

keetsy said:
Hello!
So the problem started today, when my phone got shutted down ( because battery was 4%.. ) and when i was able to charge it, this sh#t started.
So, some things first:
Click to expand...
Click to collapse
I am going to try to explain this a little and maybe it will help you out.
keetsy said:
- I'm not able to get to the place ( phone off -> volume down and turn phone on ) where i could flash wp6.5 or do task29
Click to expand...
Click to collapse
What you are talking about is called bootloader and this is probably caused by a faulty volume down button. Unless you check the hardware for the volume down button and fix it if it is faulty there is no other fix for this issue unless you are using Windows Mobile then you can use the enterbootloader.exe.
keetsy said:
- I couldn't enter into rom because it froze to the part where HTC is green with black background
Click to expand...
Click to collapse
It froze on what is called the splash screen and this is not all in all just a major issue and can more than likely be fixed.
keetsy said:
- Rom worked with safe mode
Click to expand...
Click to collapse
Safe mode on a device is the same as safe mode on a computer, it will allow you to boot the device and hopefully find the problem or fix the problem.
keetsy said:
- USB flasher doesn't work in malgdr
Click to expand...
Click to collapse
This is probably a driver issue and is only needed to flash a Android recovery or to flash a Windows Phone ROM.
keetsy said:
- Buttons are messy ( but i have now figured how they work )
Click to expand...
Click to collapse
I would like some more info on this actually as far as what buttons you are talking about. It also plays into what I said about a faulty volume down button.
keetsy said:
- I*M NOT ABLE TO HARD RESET, when it says " press volume up to reset ", it does nothing. I have to take off the battery to get off there.
Click to expand...
Click to collapse
This is because you have MAGLDR installed, there is no software for the device to reset.
keetsy said:
+ I'm able to go to AD recovery, and do anything there
Click to expand...
Click to collapse
This is good because I think recovery just may be what you need to use to fix your issue.
keetsy said:
+ I'm able to use USB MassStg
Click to expand...
Click to collapse
This is also good because you can transfer any needed files to your SD card using this.
keetsy said:
So what can I do? Or what should i do? This is really sad to me. I've flashed roms since March with great succes, but now I face a problem like this in normal use. So i'm pretty confused.
I'm able to take some video if you need it.
Not sure did i make it to the right section, but i hope i made.
Click to expand...
Click to collapse
I assume you are using a Android ROM because you said you can still use AD recovery. I suggest you read the first couple of post in the thread for the ROM you are using to find the suggested partition size you need as you may not have the right partition size if that is the case you will need to re partition your device but without being able to use USB flasher you will not be able to flash a new recovery with your new partition size. But you you should be able to edit a recovery and use it with AD sd, look in my guide linked in my sig for more infor on using recovery from SD card.
Also you can try to do a wipe of your cache and delvik cache and see if that helps. You can also try to make a backup of your ROM and re flash the Android ROM to see if that helps.
But to be honest with you your situation is odd because it did not happen right after you flashed a ROM. This sorta leads me to beleive you may have hardware issues.

LOL, when i started the phone today, the buttons worked normally. In Malgdr & AD recovery.
Of course, i tried to go to bootloader and I did. After that I flashed WM6.5 succesfully.
I'm going to upload a video about this all today or tomorrow. Rendering the video just now.
Edit: Installed this rom: http://forum.xda-developers.com/showthread.php?t=1912740
Still, back and "windows" button are bugging. Sometimes when i press them, they change the volume and the real volume buttons do the same.
Edit 2: You can watch the video here: http://www.youtube.com/watch?v=mDMZQRzcZmM

keetsy said:
LOL, when i started the phone today, the buttons worked normally. In Malgdr & AD recovery.
Of course, i tried to go to bootloader and I did. After that I flashed WM6.5 succesfully.
I'm going to upload a video about this all today or tomorrow. Rendering the video just now.
Edit: Installed this rom: http://forum.xda-developers.com/showthread.php?t=1912740
Still, back and "windows" button are bugging. Sometimes when i press them, they change the volume and the real volume buttons do the same.
Edit 2: You can watch the video here: http://www.youtube.com/watch?v=mDMZQRzcZmM
Click to expand...
Click to collapse
I watched the video and I gotta say I think you have hardware issues. I would recommend you find someone to take a lookk at you volume buttons and the hardware buttons to see about fixing them. Both sets of buttons are replaceable.

I'll try to take care of that.
Thank you really much !

[Q] 3 days strait nothing works hd2 android no root <3e> recovery no usb

HI all, thank you for your time.
I recently inherited a htc hd2 that has android 2.3.4 on it, model T8585 baseband ver maui.11amd.w11.19.sp.v1, 2011/06/23 00:50. kernel 2.6.35.7. build number 10hx2p.h3.111121.ad2_3_4_v1.wvgac_cn.com_v01_3g.
I don't know what any of that means but for 3 days I have been trying to put ICS on my phone but cant get any of the apps to connect to the phone via usb, htc sync, win mod sync, no rom apps connect, moborobo will connect, and accessing the sd works but that is all.
I do not have clockwork recovery and can not install, my recovery program is <3e>.
even though android is running on the phone it will not allow root access.
I have downloaded and installed all the java and sdk stuff, could not manualy install usb connection drivers, my os is win 7 64.
I am going mad, every turn seems to be a brick wall, but not a brick phone yet, please help!

don't worry
Hi dj,
well it sounds like the most important stuff should be on your phone. However, I'm missing the following information:
Do you have magldr or CLK installed?
To find out, do the following:
Turn on your phone (with the hangup-key), right after feeling the bootup vibration press and hold the hangup-key again.
If you have a working magldr or CLK installed it should show up now.
The version is also important, my MAGLDR is version "1.13".
Tell me what your phone has installed please and I'll try to help more.
Greets

rubb3ld1ek4tz said:
Hi dj,
well it sounds like the most important stuff should be on your phone. However, I'm missing the following information:
Do you have magldr or CLK installed?
To find out, do the following:
Turn on your phone (with the hangup-key), right after feeling the bootup vibration press and hold the hangup-key again.
If you have a working magldr or CLK installed it should show up now.
The version is also important, my MAGLDR is version "1.13".
Tell me what your phone has installed please and I'll try to help more.
Greets
Click to expand...
Click to collapse
thanks for the quick reply, no I can not install that stuff, when I go into recovery mode it is <3e> recovery not clockwork, I can not install them because my phone does not seem to support native usb, I have tryed to install them from the sd card, I have tryed to install CLK from the app at the google download store, nothing works, I have red that i should roll back rom to win but cant to that without htc or other sync working, I have read roll recovery back to <2e> using the sd card but cant do that, I cant even root the phone because everything requires that a usb sync work or that CLK already be on, I;m going round in circles.

dj.asynchronous said:
thanks for the quick reply, no I can not install that stuff, when I go into recovery mode it is <3e> recovery not clockwork, I can not install them because my phone does not seem to support native usb, I have tryed to install them from the sd card, I have tryed to install CLK from the app at the google download store, nothing works, I have red that i should roll back rom to win but cant to that without htc or other sync working, I have read roll recovery back to <2e> using the sd card but cant do that, I cant even root the phone because everything requires that a usb sync work or that CLK already be on, I;m going round in circles.
Click to expand...
Click to collapse
okay, I don't know if I get you right? You have android on your HD2 but you don't have MAGLDR or CLK (those are bootloaders, not recoveries)?
Magldr looks like this: http://www7.pic-upload.de/17.02.11/n35i2xpo9mg.jpg
And you enter it this way (if you should have it): pull out battery -> put back in -> press and hold the power key until you see the magldr screen (takes maybe 5 seconds).
My problem is that I'm not sure how your phone is setup. Please try to clarify.
If you have or had a working android on your phone, I'm pretty sure that you also have MAGLDR or CLK installed.
However... if you don't have it yet please download the HD2-Toolkit from here: http://forum.xda-developers.com/showpost.php?p=19931919&postcount=50
Thats a good tool to install either: magldr or clk. And once you have it I'll try to help you with that.
Greets

rubb3ld1ek4tz said:
okay, I don't know if I get you right? You have android on your HD2 but you don't have MAGLDR or CLK (those are bootloaders, not recoveries)?
Magldr looks like this: http://www7.pic-upload.de/17.02.11/n35i2xpo9mg.jpg
And you enter it this way (if you should have it): pull out battery -> put back in -> press and hold the power key until you see the magldr screen (takes maybe 5 seconds).
My problem is that I'm not sure how your phone is setup. Please try to clarify.
If you have or had a working android on your phone, I'm pretty sure that you also have MAGLDR or CLK installed.
However... if you don't have it yet please download the HD2-Toolkit from here: http://forum.xda-developers.com/showpost.php?p=19931919&postcount=50
Thats a good tool to install either: magldr or clk. And once you have it I'll try to help you with that.
Greets
Click to expand...
Click to collapse
I do appreciate your help, I had already installed the toolkit but it will not connect to the phone(no pc based "phone hacking"software will connect to the phone. the usb works fine only to access the sd card, moborobo will synch with phone but nothing else.
when i hold vol down and on, the phone boots into <3e> recovery, <3e> is not an emoticon, it is the name of the recovery app the phone boots into, not any clockwork, magldr thing.
I think I could sort it all out one way or another if I could flammin ROOT! my phone, but all the methods I have found involve using a sync program that i cant use because they will not communicate with the phone.
I know it seems strange that a windows phone has android on it without being rooted or having other stuff going on, but I assure you this is the case.
I'm obviously missing something but I don't know what it is??? I's there a way to root the thing from the sd card, or is there a hidden box that i just have to check to access the root? I'm lost bro http://forum.xda-developers.com/images/smilies/eek.gif

PLEASE DON'T follow those steps. As Nigeldg pointed out: there are incorrectnesses in my post!
Follow this link instead: http://forum.xda-developers.com/showthread.php?t=1044830
Okay, I think I kinda get where you're stuck at.
Here is what I think I would do, just out of my memory:
- Install the Toolkit again. Start program and in there download the drivers (button in the right corner) and install them properly.
- Boot phone and press down the volume down key (exactly like this: click on power button, release power button, hold volume down and keep holding), to get into three color screen.
- Connect your phone via usb and wait until it says USB on the phone (instead of serial)
- if it should not switch to USB, your Windows does not connect to your phone, because of a driver problem (maybe you have to reboot your pc ​once?!)
- start your toolkit
- press Wipe (Task 29) --> this will erase everything on your phones NAND
- follow instructions
- next press install HSPL
- follow instructions
- reboot phone
- press Install MAGLDR
- follow instructions
- boot phone and keep holding the power button until you see the MAGLDR menu
- move down to "5. USB Flasher" (with volume down)
- press call button to enter
- wait until it says USB....USB
- in the Toolkit, on the left side choose your partition size (my suggestion 200mb main and 45 cache)
- press repartition
- follow instructions
- reboot phone into MAGLDR again and move down to "8. AD Recovery"
- press call button to enter
- move down to mounts and storage
- press call button to enter
- mount USB-Storage (your sd-ccard)
- your computer should show your SD-Card
- download your favorite ROM and move the .zip to the SD-Card
- back on your phone unmount USB-Storage
- go back with back button
- move down to "install ZIP from SDcard" and choose the desired zip file
- follow the installer and reboot into MAGLDR afterwards
- in MAGLDR move down to "10. Services"
- press call button to enter
- and press call button again on "1. Bootsettings"
- and again on "1. Boot Source"
- then move down to "2. Android from NAND"
- and finally press call button to finish this
- Now move cursor to "3. Boot AD NAND" and press call button.
-> Your phone should boot up android and set it up for you, give it some time, even after seeing the login screen.
Reading your last answer, I think your problem is right at the beginning of what I wrote. You can't even get into the 3 color screen?!
If this should not work please tell me at what point of my instructions you are stuck.
Greets

Nigeldg said:
@OP, Actually please don't follow that guide. Just reading a few lines shows that:
1. It says to Task29 (never a necessary step)
2. It then says 'install HSPL'. Either HSPL 2.08 is already installed (so this step isn't needed) or you've just messed up your phone by trying to flash Task29 without HSPL
3. It says to repartition with a 200MB system and 45MB cache - you actually repartition as per the ROMs requirements, and 45MB cache is just a waste of space (most ROMs recommend 5, people have flashed as low as 2MB without issue)
4. It says to transfer the ROM to your SD card via CWM, which can cause the .zips to be corrupted. Always transfer via an SD card reader if possible, or within an OS (not MAGLDR or CWM).
5. It says that you have to set the boot settings to AD NAND when you don't
Whilst it's great that you're trying to help people out and write your own guides, don't do so when you're ill-informed and don't really know what you're doing. It's best just to stick with already existing guides.
@OP, try the guide in my sig if you're looking for one which is easy to follow, has clearly outlined steps and is (most importantly) correct.
Click to expand...
Click to collapse
^The same post I wrote on the other thread

Hey Nigeldg
thanks for your advance in this. Thanks for pointing those out. Will correct that and point to the links in your signature from now on.
Greets

rubb3ld1ek4tz said:
Hey Nigeldg
thanks for your advance in this. Thanks for pointing those out. Will correct that and point to the links in your signature from now on.
Greets
Click to expand...
Click to collapse
" Boot phone and press down the volume down key (exactly like this: click on power button, release power button, hold volume down and keep holding), to get into three color screen".
when I follow this step my phone goes into <3e> recovery, not red blue green clockwork, "<3e>" is my recovery, it is a screen with "!" in a triangle and a little android dude.
my recovery does not let me install unsigned stuff so even though I can put things on the sd card, I can not install them from there.
the phone does not sync with any toolkit, install, htc, win, android, or other even though htc, and android drivers are in my device driver list.
my phone is not rooted.
I do appreciate all your help guys, I will keep looking arround the forum, I found some posts about my <3e> recovery and mods so it will allow install of non signs apps, peace.

dj.asynchronous said:
" Boot phone and press down the volume down key (exactly like this: click on power button, release power button, hold volume down and keep holding), to get into three color screen".
when I follow this step my phone goes into <3e> recovery, not red blue green clockwork, "<3e>" is my recovery, it is a screen with "!" in a triangle and a little android dude.
my recovery does not let me install unsigned stuff so even though I can put things on the sd card, I can not install them from there.
the phone does not sync with any toolkit, install, htc, win, android, or other even though htc, and android drivers are in my device driver list.
my phone is not rooted.
I do appreciate all your help guys, I will keep looking arround the forum, I found some posts about my <3e> recovery and mods so it will allow install of non signs apps, peace.
Click to expand...
Click to collapse
This may sound silly but always best to check the simple things 1st, do you have windows mobile device center installed?

I am not entirely convinced you have a HD2. you may have a clone.

I'm inclined to believe RobbieP's right. I've never heard of this recovery ever being used on an HD2. You claim that you're not rooted (all of the HD2's ROMs are rooted bar the DFT Stock Desire ROM) and you also say that when you boot up there is an ! in a triangle. None of these things should really be happening on an HD2.
Secondly, you seem to be very confused about your terms. Please read the guide in my sig about that, as if you somehow do have an HD2 then you should be aware of all of those things before flashing.
If possible, could you post some pictures of your phone and also the settings info etc.? It might help in determining if it's a fake.

swukjay said:
This may sound silly but always best to check the simple things 1st, do you have windows mobile device center installed?
Click to expand...
Click to collapse
Yeh, it's installed, but just to be certain, after your question, I reinstalled it, still no good.
Im going to try to root the phone latter, will look around on this forum for a non usb style root.
yeah I suppose it could be fake, I have only seen on forums of Samsung phones using this recovery, It was bought on eBay cheep, when I do a factory reset it goes Asian on me, it looks exactly like the hd2.
As far as getting some terms mixed up, sorry, I had put in a lot of reading and trial and error before asking for help, It's hard to gauge how long to grind away at something before asking for a tip.
I will post some pics of the phone latter
thanks again for all your help guys.

[Q] Defunct power button, can't boot into MAGLDR?

I have a busted power button (end call button) and was wondering if I could boot into MAGLDR without it directly booting straight to android. I know that I'm supposed to press the power button at the MAGLDR boot sequence to reach the menu that lets me use CM recovery but I'm not able to do that. Is there any way in which I can install a new ROM on my phone without actually using MAGLDR and CM recovery? Or any other way to make me reach the MAGLDR menu screen?

gamerprithvi said:
I have a busted power button (end call button) and was wondering if I could boot into MAGLDR without it directly booting straight to android. I know that I'm supposed to press the power button at the MAGLDR boot sequence to reach the menu that lets me use CM recovery but I'm not able to do that. Is there any way in which I can install a new ROM on my phone without actually using MAGLDR and CM recovery? Or any other way to make me reach the MAGLDR menu screen?
Click to expand...
Click to collapse
You could try getting into the bootloader then flashing everything from scratch. To get into the bootloader without the power button I think you can take off the back cover and press the small reset button near the SD slot (using a pin or toothpick) while holding volume down. From there, if that actually works, you can flash a Task 29 followed by MAGLDR, CWM and a new ROM.

Or alternatively, there is an old legend that says "reboot into recovery" & "reboot into bootloader" from within Android let you reboot into MAGLDR, do you believe in legends?
(According to the scrolls, this legend may only be true if you have Android already installed obviously)
EDIT:
Actually, you can do that without having android working (e.g. you're stuck at the ROM splash screen or in a bootloop). Just use adb to reboot into recovery/bootloader and you should be in MAGLDR.
Apparently the scrolls were wrong.

You do realize that I mentioned that my power button was busted so it wasn't possible for me to boot into recovery through the power-restart prompt menu from within the ROM after booting. Or is there any other way to get that prompt from within the ROM? Infact from what I know, telling it to boot into recovery never did work on my HD2....I had to press the end call every time I wanted it to get to the MAGLDR menu.
Sent from my NexusHD2 using xda app-developers app

And I did use adb before posting this here but it boots straight to Android. That doesn't work.
Sent from my NexusHD2 using xda app-developers app

Marvlesz said:
Or alternatively, there is an old legend that says "reboot into recovery" & "reboot into bootloader" from within Android let you reboot into MAGLDR, do you believe in legends?
(According to the scrolls, this legend may only be true if you have Android already installed obviously)
EDIT:
Actually, you can do that without having android working (e.g. you're stuck at the ROM splash screen or in a bootloop). Just use adb to reboot into recovery/bootloader and you should be in MAGLDR.
Apparently the scrolls were wrong.
Click to expand...
Click to collapse
I got it working. Thanks for your help.:good:

gamerprithvi said:
You do realize that I mentioned that my power button was busted so it wasn't possible for me to boot into recovery through the power-restart prompt menu from within the ROM after booting. Or is there any other way to get that prompt from within the ROM? Infact from what I know, telling it to boot into recovery never did work on my HD2....I had to press the end call every time I wanted it to get to the MAGLDR menu.
Sent from my NexusHD2 using xda app-developers app
Click to expand...
Click to collapse
gamerprithvi said:
I got it working. Thanks for your help.:good:
Click to expand...
Click to collapse
You know what really grinds my gears? When people say "it's not working" to what you give them before they even try it out . (j/k)
Glad you got it working.

Marvlesz said:
You know what really grinds my gears? When people say "it's not working" to what you give them before they even try it out
Glad you got it working.
Click to expand...
Click to collapse
FTFY
OP, reboot into recovery/bootloader never worked in MAGLDR. Those options only work in cLK. +1 to 'glad you got it working'.