[Q] HSPL to install on 3.03? - HD2 General

hey guys, I haven't been on xda for a while and I don't know the rules so please excuse me.
Here's my problem: I sent my phone back to HTC for a repair and when I got it back, it has been updated to the current OS and radio and my SPL has been upgraded to 3.03, is there a way to install HSPL on 3.03?
Or its permanent I can't? Becuase I wanna try WP7.
Thanks guys, please tell me if I'm breaching the rules.

You can't install HSPL over 3.03. You need to flash an earlier stock ROM that downgrades to SPL 2.08. Have a look in the HD2 WM6.5 Development forum for a ROM.
http://forum.xda-developers.com/forumdisplay.php?f=534

So, how will I downgrade without HSPL?
And once I dowgrade, can i upgrade back to the recent rom while i have HSPL3 on? and radio doesnt matter right?

superjjskate said:
So, how will I downgrade without HSPL?
And once I dowgrade, can i upgrade back to the recent rom while i have HSPL3 on? and radio doesnt matter right?
Click to expand...
Click to collapse
You don't need HSPL unless you want to flash a custom ROM, so find a stock one for your device. Since you want HSPL I assume you want custom ROMs, and they won't affect your SPL.
Is it a custom WM ROM you want, or are you going for Android or WP7 instead?

yeh, Android and kinda WP7.

You can dual boot WP7 from the phone and Android from the SD card, or you can forget WP7 and put Android on the phone instead - that's the only options you have for those 2 OSs.
Either get a stock ROM from the ROM section, or get one from the HTC site (Don't get a 3.xx ROM as that will flash SPL 3.03). Once you've downloaded it, unzip the exe file - there should be a file in there called RUU_signed.nbh. Rename that file to leoimg.nbh and copy it to the root of your SD card. Then, with the card in your device, turn it off and go into bootloader mode (hold the volume down button and briefly press power).
That should flash the ROM and downgrade your SPL version at the same time.
Good luck mate

haha thanks,
not to annoy you but, would SSPL work for both OS's?
http://forum.xda-developers.com/showthread.php?t=606713

no
............. 10 character limit is ridiculous

my SPL is 3.03 also is poseble to downgrade to hspl 2.8?
i want to flash my hd2 to android (Ginger) with chinese language..

NamiscA said:
my SPL is 3.03 also is poseble to downgrade to hspl 2.8?
i want to flash my hd2 to android (Ginger) with chinese language..
Click to expand...
Click to collapse
Yes you can flash HSPL with SPL 3.03 you just have to use HSPL 4, just click the link in my sig where it says HSPL=2.08 to go to where you can download it, and click on my guide I have linked in my sig to find out how to install it.

T-Macgnolia said:
Yes you can flash HSPL with SPL 3.03 you just have to use HSPL 4, just click the link in my sig where it says HSPL=2.08 to go to where you can download it, and click on my guide I have linked in my sig to find out how to install it.
Click to expand...
Click to collapse
thanks bro..
please send me a link on how to upgrade my hd2 to android with chinese language..
im getting pain to look android with chinese language here......

NamiscA said:
thanks bro..
please send me a link on how to upgrade my hd2 to android with chinese language..
im getting pain to look android with chinese language here......
Click to expand...
Click to collapse
I use Hyperdroid it has Chinese in it but I think most of them will have Chinese in them. You just have to go to Settings/Language & keyboard/Select language and scroll down until you see Chinese. Mine has Chinese traditional and Chinese simplyfied, they are at the very bottom of the list by the way. Check my sig for a link to Hyperdroid.

T-Macgnolia said:
I use Hyperdroid it has Chinese in it but I think most of them will have Chinese in them. You just have to go to Settings/Language & keyboard/Select language and scroll down until you see Chinese. Mine has Chinese traditional and Chinese simplyfied, they are at the very bottom of the list by the way. Check my sig for a link to Hyperdroid.
Click to expand...
Click to collapse
hillow i already upgrade to android... 2.2 by Cotulla but no chinese language.. if i want to upgrade again into hyperdroid is it poseble?

NamiscA said:
hillow i already upgrade to android... 2.2 by Cotulla but no chinese language.. if i want to upgrade again into hyperdroid is it poseble?
Click to expand...
Click to collapse
Do you have CWM flashed to your HD2? and to answer your question yes you can change to Hyperdriod but it will be alot easier if you have CWM.

Related

HSPL3 released

May i point to HSPL3 - all hd2 supported, works with spl 2.10.0000
samsamuel said:
May i point to HSPL3 - all hd2 supported, works with spl 2.10.0000
Click to expand...
Click to collapse
Sweet!
So if we already have HSPL on our HD2, would there be any benefit in loading the new one?
joe_coolish said:
Sweet!
So if we already have HSPL on our HD2, would there be any benefit in loading the new one?
Click to expand...
Click to collapse
nah, not really. its gonna give you the same 2.08.hspl whichever you use. This is more to cut out the downgrading step.
samsamuel said:
nah, not really. its gonna give you the same 2.08.hspl whichever you use. This is more to cut out the downgrading step.
Click to expand...
Click to collapse
so if we want to install hspl for example i have 2.10 rom with 2.08spl i have to use that one now.
htcp85 said:
so if we want to install hspl for example i have 2.10 rom with 2.08spl i have to use that one now.
Click to expand...
Click to collapse
no, cos you already have spl 2.08.0000 so hspl1024 already works.
this is just an update to the installer so that it works with all model hd2s, and all spl versions, with less options to go wrong.
Is this TMOUS compatible?
donalgodon said:
Is this TMOUS compatible?
Click to expand...
Click to collapse
yep. works on spl 2.08.0000 and spl 2.10.0000 so no need to downgrade.
You can only choose 2.08.hspl or stock 2.08.0000 though, cotulla decided its safest to just offer the one spl fits all.
Should work on pretty much every hd2 out there.
so for everyone that keeps asking is it needed to switch to HSPL3 if you already have HSPL_1024 the answer is no.
If you were on stock rom 2.13 ( which the phones ship with this now) your spl would be 2.10.000 so if you wanted to HSPL before you would have to downgrade your rom to 2.10 which would give you a SPL of 2.08.000 but with this you will not need to downgrade which gives you less of a chance to brick your phone.
wouldn't an HSPL 2.10.000 offer some performance benefit?
donalgodon said:
wouldn't an HSPL 2.10.000 offer some performance benefit?
Click to expand...
Click to collapse
no ones noticed anything, the telstra users have been on 1.42.hspl till the last few days and using all the roms, no issues.
Is msskip going to incorporate HSPL3 into his guide?
samsamuel said:
May i point to HSPL3 - all hd2 supported, works with spl 2.10.0000
Click to expand...
Click to collapse
so let me get this straight....this is all u need in order to install custom roms....cause i upgraded my htchd2 to 2.13 and all but i do not like it that much so with this i can hspl it blah blah blah to 2.08 and put custom roms?
PoisonWolf said:
Is msskip going to incorporate HSPL3 into his guide?
Click to expand...
Click to collapse
i think he already did.
Sylux said:
so let me get this straight....this is all u need in order to install custom roms....cause i upgraded my htchd2 to 2.13 and all but i do not like it that much so with this i can hspl it blah blah blah to 2.08 and put custom roms?
Click to expand...
Click to collapse
yep
Bump for Great Justice
HSPL3 working on Tmobile US HTC HD2 ROM 2.13.531.1
I have US Tmobile HTC HD2 with following specs:
Manilla 2.5.20121412.2
ROM version 2.13.531.1 (90963) WWE
ROM date 4/28/10
Radio version 2.10.50.26
Protocol version 15.39.50.07U
I have HSPL3 installed and working.
For How-To look up following in Google (As a Newbie, I am unable to post external link.):
[TUT] Flashing your First GSM USA 1024LEO ONLY!! (For Noobs)
Note that this Guide is only for T-Mobile USA HD2 with 1024 Mbytes ROM (1024LEO)
[TUT] Flashing your First GSM 512LEO Rom (For Noobs)
Note that this Guide is designed ONLY for HD2 with 512 Mbytes ROM. If you are unsure then goto Settings, System, Device Information, Hardware Information and look at the Flash Size.
Note that I had to download and install Windows Mobile Device Center 6.1 on my computer. Prior to that, I was getting some .dll missing error and HSPL3 installation was failing.
Thanks.
[TUT] Flashing your First GSM USA 1024LEO ONLY!! (For Noobs)
Note that this Guide is only for T-Mobile USA HD2 with 1024 Mbytes ROM (1024LEO)
[TUT] Flashing your First GSM 512LEO Rom (For Noobs)
Note that this Guide is designed ONLY for HD2 with 512 Mbytes ROM.
If you are unsure then goto Settings, System, Device Information, Hardware Information and look at the Flash Size.
Note that I had to download and install Windows Mobile Device Center 6.1 on my computer. Prior to that, I was getting some .dll missing error and HSPL3 installation was failing.
Thanks.
Click to expand...
Click to collapse
filled in the links for ya.
For some reason Im missing the dll. Is it just me or did HSPL3_PKG not come with the dynamic link library
Sorry posted too soon now I no longer have the dll error since installing the windows mobile device center 6.1. Now the usb connection times out
flyn_brian said:
For some reason Im missing the dll. Is it just me or did HSPL3_PKG not come with the dynamic link library
Click to expand...
Click to collapse
What DLL ?
"the" does not tell us much ...
Everything you need should be in the zip
timeout usually caused by using usb slot in pc casing or hub.
you should use one around back of the pc.
rlacsamana1989 said:
so for everyone that keeps asking is it needed to switch to HSPL3 if you already have HSPL_1024 the answer is no.
If you were on stock rom 2.13 ( which the phones ship with this now) your spl would be 2.10.000 so if you wanted to HSPL before you would have to downgrade your rom to 2.10 which would give you a SPL of 2.08.000 but with this you will not need to downgrade which gives you less of a chance to brick your phone.
Click to expand...
Click to collapse
This is what I needed to know (I have stock 2.13)...might want to post in first thread.

Rom Upgrade-GCC & Egypt

Dear members,
I purchased my HD2 last year in Dubai(english rom) and have just seen a new rom @HTC for GCC and Egypt(whatever that means) can i upgrade? I speak english and wouldn't what my device to be in Arabic.
Alkali said:
Dear members,
I purchased my HD2 last year in Dubai(english rom) and have just seen a new rom @HTC for GCC and Egypt(whatever that means) can i upgrade? I speak english and wouldn't what my device to be in Arabic.
Click to expand...
Click to collapse
Please help!
so, to summarize, you have a phone in english, you've seen a rom you don't want to flash, so you are asking our advice,,,,
my advice would be to hspl and then flash any english (wwe) rom you want. get the latest stock roms from the "leo official roms" thread in rom development.
samsamuel said:
so, to summarize, you have a phone in english, you've seen a rom you don't want to flash, so you are asking our advice,,,,
my advice would be to hspl and then flash any english (wwe) rom you want. get the latest stock roms from the "leo official roms" thread in rom development.
Click to expand...
Click to collapse
I do not understand!For years i wanted to try one of the ROMS in this website but for the life of me cannot understand how to go about it so i stick to ROM UPGRADES from HTC! The 0ne i am now mentioning is still @ HTC.What is your advise pls?
go to hspl thread
download hspl2
run hspl2choose 1.66.hspl
download the rom you want
if it is a stock rom run it.
if it is a custom rom put it in a folder with customruu.exe and run customruu
samsamuel said:
go to hspl thread
download hspl2
run hspl2choose 1.66.hspl
download the rom you want
if it is a stock rom run it.
if it is a custom rom put it in a folder with customruu.exe and run customruu
Click to expand...
Click to collapse
samsameul Thanks very much but i do not understand all you are saying.What is hspl and what is stock? I honestly do not understand!
stock means genuine htc released rom.
read everything this thread links to.
http://forum.xda-developers.com/showthread.php?t=713977
Thanks Sam!
In response to the original question yes you can upgrade your phone with the GCC ROM.It will be in english.There will be a value added installer package in your programmes after the upgrade.Dont install that package.That is for converting english to Arabic.

Help installing WM7 on HTC HD 2 Leo

Hello
First of all I have to tell you all that I have read almost every page on the forum and tried to follow every step but it ends up with a new thing to install. I need a guide from the beginning.
I have a swedish HTC Leo HD2 from sweden
PB81100
SPL 3.03.000
ROM-version 3.14.413.2 SWE
Radioversion 2.15.50.14
From what i can understand i need to install.
A rom from the beginning that supports 576 MB and radio.
I need to install HSPL
I need to install MAGLDR 1.11
Then i need to install MDJs_CyanogenMod7_v.2.6_NAND_A2SD+
The problems I have from the beginning is that i cant find a rom that supports 576 MB radio. And I have such a high SPL 3.03.000 so I cant install HSPL. So the bootloader MAGLDR 1.11 wont install and I am stuck.
So please guys will you help me with a little guide how I shall do this and link to the downloads I need.
Much Appreciated Goran
You need to go to HTCs website and download an earlier version of the 3.14 ROM - 1.66 (HTC) or 1.72 (if it is branded). You will need to use your phone's serial number to download the ROM.
Flash the ROM. Now your SPL will be 1.66.0000
Now you can run HSPL2 and select 2.08.HSPL
Download the 2.15.50.14 RADIO (look in the WinMo6.5 ROM sectrion on here for it) and flash the RADIO.
It is now ready to start the WP7 flashing process.
Pay Attention!!!!
goran.mitrovic said:
Hello
First of all I have to tell you all that I have read almost every page on the forum and tried to follow every step but it ends up with a new thing to install. I need a guide from the beginning.
I have a swedish HTC Leo HD2 from sweden
PB81100
SPL 3.03.000
ROM-version 3.14.413.2 SWE
Radioversion 2.15.50.14
From what i can understand i need to install.
A rom from the beginning that supports 576 MB and radio.
I need to install HSPL
I need to install MAGLDR 1.11
Then i need to install MDJs_CyanogenMod7_v.2.6_NAND_A2SD+
The problems I have from the beginning is that i cant find a rom that supports 576 MB radio. And I have such a high SPL 3.03.000 so I cant install HSPL. So the bootloader MAGLDR 1.11 wont install and I am stuck.
So please guys will you help me with a little guide how I shall do this and link to the downloads I need.
Much Appreciated Goran
Click to expand...
Click to collapse
Hey you dont need to flash HSPL2, search for the HSPL3 and flash that one after following fred_up's instruction and magldr 1.11 dont work for wp7 you need to flash 1.12 before you can flash wp7 into your hd2 dont forget that is the only bootloader that works for windows phone 7 dude, be care, dont brick your phone, dont forget to hit the "Thanks Button" happy flashing
When i tried to download from HTC an older ROM they say that my S/N is invalid. I dont know why. Can anyone upload the rom i need?
goran.mitrovic said:
When i tried to download from HTC an older ROM they say that my S/N is invalid. I dont know why. Can anyone upload the rom i need?
Click to expand...
Click to collapse
I think the stock rom should be there in the wiki

[Q] Flashing stock WINMO with SPL3.03 possible?

Hello guys,
I have an HD2 with SPL version 3.03. I've looked around on the forums for a guide on how to downgrade it, but i can't find one. Is it even possible?
Because i've installed Android on it trough SD card method, and it's draining my battery! have to recharge twice a day now. I've read that i have to replace the original WINMO ROM with a custom one like VBNROM to save battery.
Is it possible to downgrade this SPL 3.03? or do you guys have any other suggestions on how to increase battery life?
Greetings!
brullmarco said:
Hello guys,
I have an HD2 with SPL version 3.03. I've looked around on the forums for a guide on how to downgrade it, but i can't find one. Is it even possible?
Because i've installed Android on it trough SD card method, and it's draining my battery! have to recharge twice a day now. I've read that i have to replace the original WINMO ROM with a custom one like VBNROM to save battery.
Is it possible to downgrade this SPL 3.03? or do you guys have any other suggestions on how to increase battery life?
Greetings!
Click to expand...
Click to collapse
es, just go to HTC.com, choose support, choose your phone (HD2) then find a firmware upgrade or software upgrade.. enter your s/n found on the back of ur device..
make sure its older version..
Sorry m8 but you couldn't have searched too hard as there are plenty of references to flashing with spl 3.03.0000. You basically have 2 options, the first is to flash to an older version of your stock rom (via sd card) so that you get to an spl of 2.10.0000 or lower and then you can run HSPL3 to "crack" the spl.
Alternatively you can try the GoldCard (search xda for this) method which will allow you to flash any rom. Battery drainage can also be possibly solved by trying another radio
Okay, i will give it a try.
Can you just download firmware from HTC and install a older version over a new one? or do i have to do this through this SD card method?
@ClydeB1
Im using Radio 2.15.50.14. Guess this one is allright, since many ppl including yourself are using it.
If the rom is for your phone you can just flash it to downgrade. Just be aware that the older rom might have a different radio, so be sure to check before continuing with Android.
Yes 2.15.50 is fine (any 50 series radio from 2.08.50 or higher will work)
So I can just downgrade my ROM that easily? without using GoldCard etc.?
Which version should I download then? 3.14 is the version I am using now. It has SPL 3.03. Or can I just install 1.66.xxx.x version? Guess this one has a low SPL build.
brullmarco said:
So I can just downgrade my ROM that easily? without using GoldCard etc.?
Which version should I download then? 3.14 is the version I am using now. It has SPL 3.03. Or can I just install 1.66.xxx.x version? Guess this one has a low SPL build.
Click to expand...
Click to collapse
1.66 will do just fine.
ClydeB1 said:
1.66 will do just fine.
Click to expand...
Click to collapse
So, the only thing I have to do is to connect my HD2 on my pc, and run the stock ROM for my country?
brullmarco said:
So, the only thing I have to do is to connect my HD2 on my pc, and run the stock ROM for my country?
Click to expand...
Click to collapse
Yes........
Okay, gonna try that! ^^
Thanks alot m8! =)

HTC HD2 T-Mobile Help Needed!

Dear Developers, I am a noob and want to install Android on my device, have done a lot of research on this topic but can't find any suitable ROM.
I am having HD2 with the following Configuration:-
ROM Version- 1.43.110.2 (70315) WWE
ROM Date- 10/28/09
Radio Version- 2.04.50.22_2
Protocol Version- 15.26.50.07U
Manilla Version- 2.5.19202525.0
OS Version- 5.2.21864 (21864.5.0.81)
Can anybody tell me how can I port Android 4.0(In SD CARD) with HTC Sense into it. Which ROM will be suited and how can i put that ROM. Or is there any method like- getting Original HD2 ROM and then after that all ROMs support the device?
Every time I search on internet I get confused and sometimes scared about DEAD HD2s. I really love my phone, the only problem is that it doesn't support .NET3.5 Framework and because of that there are very less apps available. Once I get android, my phone will shine like a diamond.
I am really not that concerned of HTC Sense what I want is Android 4.0 or 2.3 with all functions properly working.
Regards,
Arun Wadhwa
themegastar1 said:
Dear Developers, I am a noob and want to install Android on my device, have done a lot of research on this topic but can't find any suitable ROM.
I am having HD2 with the following Configuration:-
ROM Version- 1.43.110.2 (70315) WWE
ROM Date- 10/28/09
Radio Version- 2.04.50.22_2
Protocol Version- 15.26.50.07U
Manilla Version- 2.5.19202525.0
OS Version- 5.2.21864 (21864.5.0.81)
Can anybody tell me how can I port Android 4.0(In SD CARD) with HTC Sense into it. Which ROM will be suited and how can i put that ROM. Or is there any method like- getting Original HD2 ROM and then after that all ROMs support the device?
Every time I search on internet I get confused and sometimes scared about DEAD HD2s. I really love my phone, the only problem is that it doesn't support .NET3.5 Framework and because of that there are very less apps available. Once I get android, my phone will shine like a diamond.
I am really not that concerned of HTC Sense what I want is Android 4.0 or 2.3 with all functions properly working.
Regards,
Arun Wadhwa
Click to expand...
Click to collapse
If you want to install SD Android there is no chance of bricking your phone. Just download the ROM from the thread (check the SD Development section) place the 'Android' folder on the root of your SD card then run CLRCAD and HARET. As for choosing a ROM, there is no Sense 4 ROM, but aside from that there's basically anything else you could possibly want. People can't tell you the 'best' ROM because different people like different things. Try some out, and decide for yourself.
In future please search properly, everything there ^ could be found with a forum search.
But Still?
You are saying right, but how will I find the right version? I am having a TMOBILE 1.43.110.2 (70315) WWE ROM.
Nigeldg said:
If you want to install SD Android there is no chance of bricking your phone. Just download the ROM from the thread (check the SD Development section) place the 'Android' folder on the root of your SD card then run CLRCAD and HARET. As for choosing a ROM, there is no Sense 4 ROM, but aside from that there's basically anything else you could possibly want. People can't tell you the 'best' ROM because different people like different things. Try some out, and decide for yourself.
In future please search properly, everything there ^ could be found with a forum search.
Click to expand...
Click to collapse
themegastar1 said:
You are saying right, but how will I find the right version? I am having a TMOBILE 1.43.110.2 (70315) WWE ROM.
Click to expand...
Click to collapse
What do you mean by 'right version'? WinMo doesn't affect SD Android, the right version is the one you like best. As long as you have a .50 radio (which you do) you're fine.
@Nigel, 2.04.50 radio doesn't count as a 50 radio, (at least as far as unlocking ram and not bricking tmouses) 2.05.50 and below (and perhaps 2.06.50, I forget without checking) are not tmous compatible.
@op, don't confuse your t mobile issued REGULAR hd2 with all the talk about the tmous, or t mobile USA hd2. You have a regular hd2. (Proven by the rom version)
samsamuel said:
@Nigel, 2.04.50 radio doesn't count as a 50 radio, (at least as far as unlocking ram and not bricking tmouses) 2.05.50 and below (and perhaps 2.06.50, I forget without checking) are not tmous compatible.
@op, don't confuse your t mobile issued REGULAR hd2 with all the talk about the tmous, or t mobile USA hd2. You have a regular hd2. (Proven by the rom version)
Click to expand...
Click to collapse
I thought something was fishy with the ROM version, thanks for clearing that up. Either way, @OP just update your ROM to the latest version or flash a newer radio then do as above for Android.
I replied in your other post....you need latest rom with radio 2.15..(radio above 2.08 is compulsory for Android) ....install hspl4..and then put SD build on card and enjoy...I recommend trying the new native SD way...fastest rom just like nand install
Please go through stickies in the Android forum or search in xda not Google
Samsamuel has enough experience in this forums with guiding and preventing people from bricking their tmous hd2 with flashing. 51 radios...so if he says it's not tmous...it is not...happy flashing
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Radio?
You mean if I update my ROM my radio will be automatically updated? If yes, then i only have to put an android rom in sd card and then install it? I hope there is no risk of bricking my phone. Is the latest ROM (WM) available on HTC website(INDIA) suitable for this? Please reply guys! If its really that simple, my phone will shine like a diamond. Please answer while keeping my ROM in mind! Your help will be appreciated.
If it's to be done manually(Radio), then how to do it and what are the risks?
correct, stock roms include spl and radio.
get hspl4
use it to set 3.03.hspl (NOT 3.03.0000, thats stock)
run the 3.14 rom you wanna flash over usb
radio will now be 2.15.50 and rom will be 3.14
go ahead and put sd android on sd
spl?
Okay, so let's make it clear. First, I've to download a ROM from htc India's website, then I've to install it by connecting it through USB, after that I've to download any one ROM from xda developers' website(of android). Then what? What was that 'spl' thing you were saying? How to change that spl, etc... Can you please elaborate. Your help would be appreciated.
no
1/ bootloader
2/ hspl4.exe --> 3.03.hspl (this is a hacked spl, , spl = secondary program loader, , ,it starts the phone, teh hacked one allows the wrong rom to be flashed without failing, , you do NOT currently have hspl because you chose 3.03.0000 which is the factory spl)
3/ bootloader
4/ install the indian rom over usb
done.
themegastar1 said:
Okay, so let's make it clear. First, I've to download a ROM from htc India's website, then I've to install it by connecting it through USB, after that I've to download any one ROM from xda developers' website(of android). Then what? What was that 'spl' thing you were saying? How to change that spl, etc... Can you please elaborate. Your help would be appreciated.
Click to expand...
Click to collapse
Why elaborate when everything's already there for you? There's a forum search tool at the top of your page, as I stated earlier - USE IT.
What?
I am currently having SPL- 1.42.0000, I've already listed my ROM and radio. So first I need to get a new rom from HTC with SPL 3.03.0000 and a better radio. Then I've to install HSPL 3.03 via HSPL4, after that I've to put Android ROM in SD CARD formatted in FAT32, then run the CTRLPD(or whatever) and haret.exe, then I am done! Aren't I right?
themegastar1 said:
So first I need to get a new rom from HTC with SPL 3.03.0000 and a better radio.
Click to expand...
Click to collapse
no
put the androidrom.zip you wanna flash on the sd card
then
bootloader
run hspl4
choose 2.08.hspl
bootloader
flash radio 2.15.50 (see the 'various radios roms and tools' link in my sig)
bootloader
flash magldr
magldr menu - usb flasher
nand toolkit - select target partition size on left, click repartition bottom left
magldr menu - 8 - ad recovery
cwm starts
choose 'instal zip from sd - choose zip - and point it to teh zip file you wanna instal
thats it
<sarcasm>
your arse is the one with the crack, your elbow is the bendy one
eggs are sucked by making a small hole in each end and sucking
breathe in, , and now out, , and in again, and out
</sarcasm>
Thank You!
I read your comments and researched on many websites and found one with easy guides- Addictivetips or something like that. Now I know the whole procedure. Thanks to you and that website. One last thing, do u think their are any chances of getting hd2 bricked with the rom i mentioned, just last question. Is it safe?
No you don't have a tmous, only tmous risks brick from wrong radio.

Categories

Resources