I have darkstone SuperRAM FroYo v1 on my HD2 and it runs great with the exception of one problem. My data connection doesn't work most of the time. I usually have "H" with the up and down arrow both gray. Even if I have 5 bars of service, my data almost never works. When I'm running WinMo 6.5 however, my data connection works perfectly.
I've tried to find threads related to my problem, but I just can't seem to find an answer.
I appreciate any help from you guys!
Is it the Nand rom? I think Darkstone mentioned that it is experimental not for daily use.
just change your rom to stable one.
Well this has happened in all versions of Android that I've tried. Do you think upgrading the radio would help?
Here are some questions back at you.
Did you set up the APN with the correct settings?
Did you mess with the Kernel?
can not install the Clockwork Mod Recovery On The HD2 when i restart on the MAGLDR only on 2.Boot AD NAND what do need help!!!!!!!!!!!
I have not, is there an instructional thread that can help me do this?
I'm not sure if you can help me Life1688, but I tried installing WP7 earlier today and made another thread about a major problem I have.
This is the thread to the other problem
I reason I'm asking you is because my knowledge of all this HD2 modifying isn't great.
Response
Try the 2.15.50.14 this rocks I get a steady 3g signal with the androi-ppc-shiftpda
nand build.
@Ionowner07470
Did changing radio help you? I have the exact same problem with the same ROM
(wich besides this works perfectly so I really dont want to change ROM)
would appriciate if you could tell me what changes you made and if they helped, thanks!
Related
ok well i just put the FroyoStone with HTC Sense V2 - Release Date: 02.Sep.2010 on my HD2 and it works just fine but i do have a problem with making calls like it freezes and crashes the caller app. its not a problem with the radio i dont think so but does anyone can help me with this? i used the searched but could not find anything but problems with radios. so i would greatly appreciated
daniel18616 said:
ok well i just put the FroyoStone with HTC Sense V2 - Release Date: 02.Sep.2010 on my HD2 and it works just fine but i do have a problem with making calls like it freezes and crashes the caller app. its not a problem with the radio i dont think so but does anyone can help me with this? i used the searched but could not find anything but problems with radios. so i would greatly appreciated
Click to expand...
Click to collapse
What radio are you using and did you run CLRCAD.exe?
Radio versions are responsible for almost every problem running android on HD2. You should really upgrade to version 2.12 and compare. Also try upgrading your winmo rom to one of the other winmo rom's on the this site, since they tweak and change minor things which may have an impact. I use ChuckyROM, which is nice because it has a cool loader for launching android with the click of a button.
What are some reliable radios yall recommend to use and I have a cooked winmo Rom already but I can do everything on the Android but make a call I can receive text emails and surf but can't make calls :/
Like the above poster already suggested, use 2.12. This is the newest radio. It works great for me.
I am using radio 2.15.50.14 and cannot get android to run
I run HARET and it shows a couple of lines of code, then within 3 or 4 seconds of running it, I get lots of static horizontal white lines and the device basically bricks and I have to remove the battery.
Any ideas?
markish99 said:
I run HARET and it shows a couple of lines of code, then within 3 or 4 seconds of running it, I get lots of static horizontal white lines and the device basically bricks and I have to remove the battery.
Any ideas?
Click to expand...
Click to collapse
I had this same problem when I first started reading about droid on HD2.
Make sure you flash your phone with HSPL and make sure you format your memory card as FAT32.
problem calling, american suffix added
hi,
i have recently upgraded my hd2 with the latest winmo (oct 2010) and install Android 2.2 with sense. that works fine, but i have sometimes a problem when i'm trying to make call, the phone add automatically the usa suffix to my number :s
example if i try to call a 06xxxxxxxxhe will try to call the 00106xxxxxxxx.
can someone please help me to resolve that.
thank you very much.
hi,
i have succesfully boot android to my hd2, but when i turn my phone off and turn it on it starts with my standard rom (winmo 6.5)
can somebody help me?
thanks!
Maybe you didn't you understand that its the way it should be ?
You have installed a SD build, which means your WM 6.5 ROM has not been touched in any way, and everytime you reboot then your phone will boot in WM first.
By the way, this is a great advantage of SD builds, because if anything goes wrong in Android, you can quickly go back to WM.
Fortunately, you can automate the work to restart Android at each boot by installing an app like EBL (Exceller boot loader). Search here on xda, or google it for more information.
Ok thanks for the reaction,
I have one problem. When i turn on the music on my phone, it's going faster than normal. I have read some things, but it stil there.
My radio version is now: 2.10.50.26
hi plz help
hi
I have a problem when i tried to run android on sd card the problem in the voice of the call whatever the win rom is or the radio i still have the same machine like voice on the call sooooooo plz plz can any on help me
hi
i have htc hd2 windows mobile im convert it to android 2.3.2 but i have some problem with dealer and it frozen when im make call and say forced close pls help me soon thnks alot.
@castro2020
More details please (NAND or SD, kernel, radio version…). Some apps like Viber or Shazam can cause this issue after using them.
First let me take the time and express my thanks for the developers/brilliant minds who made android on the HTC HD2 possible thanks so much ...
Now onto my issues well ive installed mattc 1.8 with radio 2.14.50 and i formatted my SD card before hand and followed the guide to a teeth.. But no matter which version ive loaded so far or radio i have tryed thus far i keep having the issue with phone calls incoming and outgoing.
with my last install "mattc 1.8" i was able to make one call but had the robot voice then i get a error stating somethng phone related wont work honestly the rest of the OS performs great so if i could resolve teh calling issue id be set any help would be appreciated here is some more information i have attempted..
radios ive tryed:
2.12.50
2.8.50
installs:
froyo 2.2
shubcraft v1.5
Hyperdroid 1.6
thanks in advance and sorry this had to be my first post
I suggest you do a task29 to your device, flash a new radio, flash an android-friendly rom (chuckydroid for example) then format your sd once again and go with the most recent build available.
I believe your problem may lie with the rom. It is the one part of this equation that you did not mention in your post.
polo735 said:
I suggest you do a task29 to your device, flash a new radio, flash an android-friendly rom (chuckydroid for example) then format your sd once again and go with the most recent build available.
I believe your problem may lie with the rom. It is the one part of this equation that you did not mention in your post.
Click to expand...
Click to collapse
by rom you are you talking about WM rom if so is that what i must SPL in the phone first ill give it atry thanks any other advice or links/guides.
2jztank said:
First let me take the time and express my thanks for the developers/brilliant minds who made android on the HTC HD2 possible thanks so much ...
Now onto my issues well ive installed mattc 1.8 with radio 2.14.50 and i formatted my SD card before hand and followed the guide to a teeth.. But no matter which version ive loaded so far or radio i have tryed thus far i keep having the issue with phone calls incoming and outgoing.
with my last install "mattc 1.8" i was able to make one call but had the robot voice then i get a error stating somethng phone related wont work honestly the rest of the OS performs great so if i could resolve teh calling issue id be set any help would be appreciated here is some more information i have attempted..
radios ive tryed:
2.12.50
2.8.50
installs:
froyo 2.2
shubcraft v1.5
Hyperdroid 1.6
thanks in advance and sorry this had to be my first post
Click to expand...
Click to collapse
I used the radio 2.12 for a while. Suddenly i got problems. Tried another Winmo Rom and Android builds. Nothing helped. Then i changes to radio 2.10 and suddenly everything was working. So you can try switch to radio 2.10
Ok i have had a few versions on Android running now but seem to have the same issue with every one, which is ramdomly loosing data connection although it is showing that it has. My question is has it got anything to do with the WM ROM and Radio etc im Running or is it going to be the Android Build.
I have
ChuckyRom WWE
Radio 2.15.50.14
No android on there at the Mo as I have just formatted the card I did have Mdeejay Evo Sense v.23 Revolution
Can you help ?
TommyHD2 said:
Ok i have had a few versions on Android running now but seem to have the same issue with every one, which is ramdomly loosing data connection although it is showing that it has. My question is has it got anything to do with the WM ROM and Radio etc im Running or is it going to be the Android Build.
I have
ChuckyRom WWE
Radio 2.15.50.14
No android on there at the Mo as I have just formatted the card I did have Mdeejay Evo Sense v.23 Revolution
Can you help ?
Click to expand...
Click to collapse
If you have had all PPP builds (which I suspect you have), these data drops are normal. There are ways to improve stability, look around in the development section and your build thread, or switch to an RMNET build if you really want a stable (but slower) connection. If you're on RMNET already, you'll need someone more advanced to help you but your build's thread would be a good starting point.
Ok cheers, are my ROM and Radio ok as far as you know ?
The ROM and Radio is ok. In the android dev section you'll find this wrapper. Try it out. And I recommend you to use hastarin 8.5 kernel. Seems to improve the connection stability again.
Edit: Hastarin 8.5
I have installed the last Android 2.3.7 for my HTC HD2. Everything is good and it is running smooth. Expect one thing:
3G not working. I have unlimited data plan from T-Mobile and almost (90%) from the time the internet not working (3G), in addition to WiFi sometimes it disconnected and I need to reconnect it again.
I placed the power widget on the desk with 3G/2G, and I tried everything but nothing work for the 3G?
Please HELP
My device:
HTC HD2
Android Version: 2.3.7
Kernel Version: 2.6.32.15-g99641cc
Builder number: GWK74
Thank you
kingman17 said:
I have installed the last Android 2.3.7 for my HTC HD2. Everything is good and it is running smooth. Expect one thing:
3G not working. I have unlimited data plan from T-Mobile and almost (90%) from the time the internet not working (3G), in addition to WiFi sometimes it disconnected and I need to reconnect it again.
I placed the power widget on the desk with 3G/2G, and I tried everything but nothing work for the 3G?
Please HELP
My device:
HTC HD2
Android Version: 2.3.7
Kernel Version: 2.6.32.15-g99641cc
Builder number: GWK74
Thank you
Click to expand...
Click to collapse
What is your ROM version? It may be ROM problem, may even be common in your ROM. Check your ROM development thread if somebody else reported this kind of problem, if he did there is probably a solution there.
Thank you for respond
This is all info.
AmeriCanAndroid AOSP HD2 GB2.3.7 CM7.2
And no one thread this
As i searched ROM dev thread(http://forum.xda-developers.com/showthread.php?p=18900146&highlight=3g#post18900146) you can see that there was several problems with 3G. What helped is apparently returning to factory settings. What you can try is to perform factory reset by phone settings or hard reset, but with second one you'll loose all data. If you had system data backup, dont use it after reset.
My original phone is HTC HD2 Windows phone 6.5. I switched my phone to Android 2.3.7 and I cannot do a system restore or hard reset because it will return to windows phone.
My issue with 3G on ANDROID NOW.
thx
Nah. Your ROM is NAND rom, which means it is installed on internal memory of phone and WinMo 6.5 was ereased completely and it won't return. Hard reset will wipe data of current system. If You're using MAGLDR all you need to do is perform Hard Reset with it. I dont know how about CLK, im a MAGLDR user If that won't work, i'd suggest clean install.
kingman17 said:
I have installed the last Android 2.3.7 for my HTC HD2. Everything is good and it is running smooth. Expect one thing:
3G not working. I have unlimited data plan from T-Mobile and almost (90%) from the time the internet not working (3G), in addition to WiFi sometimes it disconnected and I need to reconnect it again.
I placed the power widget on the desk with 3G/2G, and I tried everything but nothing work for the 3G?
Please HELP
My device:
HTC HD2
Android Version: 2.3.7
Kernel Version: 2.6.32.15-g99641cc
Builder number: GWK74
Thank you
Click to expand...
Click to collapse
Well if youre using CLK then it most likely is that . and if you arent very good with android or setting things up i suggest you switch to MAGLDR . if you shut down your phone then reboot , and you see "GO GO GO" youre on magldr . if not , youre on CLK . also , which kernel are you using ? the stock one ? i recommend fikret's or seadersn kernels for stability .
I am using CLK and I can go all over the setting but nothing working?
The Kernel Version: 2.6.32.15.
My issue is only no 3G and some time there is?
Marquo
I installed the Android on the SD. It is not on the internal I am sure.
Are you using NAND? is stable and 3G working?
kingman17 said:
Marquo
I installed the Android on the SD. It is not on the internal I am sure.
Are you using NAND? is stable and 3G working?
Click to expand...
Click to collapse
Yes, with my ROM everything is working perfectly.
Marquo
Can you send me your ROM information and how I can downloaded and install it?
I am familiar with HTC HD2 Android SD, but I have never installed or tested and NAND Android?
Please provide me the links to download it!
Thanks
Do any one has any idea how to fix 3G. It is not working and the WiFi sometimes disconnected?
This version (AmeriCanAndroid AOSP HD2 GB2.3.7 CM7.2) is running smooth except 3G?
HTC HD2 Android (AmeriCanAndroid AOSP HD2 GB2.3.7 CM7.2)
SD version
kernel :6.32
kingman17 said:
Marquo
Can you send me your ROM information and how I can downloaded and install it?
I am familiar with HTC HD2 Android SD, but I have never installed or tested and NAND Android?
Please provide me the links to download it!
Thanks
Click to expand...
Click to collapse
ROM:
http://forum.xda-developers.com/showthread.php?t=1166948
I use 3.1.1, with 3.1.2 some people have some issues.
Guide:
http://www.enfeuman.com/2011/04/13/how-to-perform-a-clean-installation-on-nand-android-htc-hd2/
Good luck
No 3G or H
I found that it is not easy to install NAND for me.
I still stick on SD version, but I still have the same issue, NO 3G
Do any one has fix for that
HTC HD2
AmeriCanAndroid AOSP HD2 GB2.3.7 CM7.2
I tried maybe more than 5 vesrions of android and I found that all of them has different issues.
This version is more stable (AmeriCanAndroid AOSP HD2 GB2.3.7 CM7.2), but no 3G or H?
Please Help
Hello all! Most need help with HD2. I loaded via Recovery CLK NexusHD2 4.4, it working ok but a lot of lags and freezes and very slowly work, I think because HD2 have not enough CPU power and capacity of RAM. I loaded NexusHD2 android 2.3 and it great working, very fast and very stable, but bad mistake - not have cellular network. I does try know and it not have IMEI. I loaded android 4.4 again and have IMEI and network working ok. Now loaded 2.3 and again not have IMEI. Please, help me solve this problem, I need working network on HD2 with android 2.3.
flexx-001 said:
Hello all! Most need help with HD2. I loaded via Recovery CLK NexusHD2 4.4, it working ok but a lot of lags and freezes and very slowly work, I think because HD2 have not enough CPU power and capacity of RAM. I loaded NexusHD2 android 2.3 and it great working, very fast and very stable, but bad mistake - not have cellular network. I does try know and it not have IMEI. I loaded android 4.4 again and have IMEI and network working ok. Now loaded 2.3 and again not have IMEI. Please, help me solve this problem, I need working network on HD2 with android 2.3.
Click to expand...
Click to collapse
You mentioned that you're using cLK bootloader. When installing the 2.3 ROM, are you sure you're flashing/selecting the correct connection method? To get data on cLK, you must be using PPP protocol.
If by cellular network, you mean no signal/coverage at all (e.g. you can't even make phone calls), then I'm not sure what the cause is. You may search the ROM's thread, you might be able to find something there.
Marvlesz said:
You mentioned that you're using cLK bootloader. When installing the 2.3 ROM, are you sure you're flashing/selecting the correct connection method? To get data on cLK, you must be using PPP protocol.
If by cellular network, you mean no signal/coverage at all (e.g. you can't even make phone calls), then I'm not sure what the cause is. You may search the ROM's thread, you might be able to find something there.
Click to expand...
Click to collapse
Yes, I use PPP method in installing. But phone haven't IMEI with this rom. On rom with android 4.4 IMEI and network worked. Both rom NexusHD2. Thread of NexusHD2 version 2.3 at this time closed.
Problem solved. I installed other rom - TyphooN CyanogenMod 7 android 2.3 and all work normally.