Hey. I have owned my Wildfire for a week now so I am still a noob. I wanted to know if it's possible to install a custom ROM on the wildfire without an SD card so basically do it through USB. I have seen some phones can do it with Amon RA recovery but I don't think it is possible for the Wildfire.
Thanks.
Dont think it is although why would you want to do it without? The wf comes with a sd card
Sent from my GT-P1000 using XDA App
Because when i put my SD card in the adapter and put it into my laptop it cant open the card and asks "do you want to format" and when i choose yes it says "unable to complete format" so im screwed with that SD card
Use paragon partition n look on YouTube 4 a video that will sort it out n will fix that error
Sent from my HTC Wildfire using XDA App
Still dont work its not even showing up on my computer now ive probably ****ed it somehow but on my phone it says 1.83gb free space. weird.
Dose paragon partitioning show ur sd at all if not erm check to make sure ur SD card reader is ok bu using a different SD card
if paragon partitioning is showing ur sd card.
is ur SD card signed as active and does it have a volume letter as these thing will stop I from formating the SD card
Sent from my HTC Wildfire using XDA App
It showed my SD card then when I tried to format it would only show my hard drive and plus the free version does not let you do anything to the card.
Try Panasonic SD Formatter:
http://panasonic.jp/support/global/cs/sd/download/index.html
E: Probably unrelated, but, make sure your card reader supports SDHC cards.
1.What happens when you connect the phone via USB and choose mount as disk drive?
2.When you use the SD card adapter, and right click on the SD card's drive letter if there's an option to "open as portable device" try that also try updating your laptops card reader drivers.
3.Use bluetooth to transfer the ROMS?
4. If you're already rooted, try formatting SD card via ROM MAnager.
As far as I know you cannot install custom firmware (a "ROM") without an SD card.
You don't have to use your SD card directly from the computer to install custom firmware. You can use file storage mode on your phone's USB connection or adb to access your SD card through your phone on your computer.
To install CyanogenMod with the help of adb, follow the steps in hxxp://wiki.cyanogenmod.com/index.php?title=HTC_Wildfire:_Full_Update_Guide and put the update.zip into the root of your SD card with this command:
Code:
adb push update-cm-6.1.0-buzz-signed.zip /sdcard/
You need to have your phone connected to your computer, have the appropriate drivers installed to do this and have USB debugging enabled on your phone. Documentation on adb is available at hxxp://developer.android.com/guide/developing/tools/adb.html
An alternative way to the above adb method is to enable USB phone storage mode when you connect your phone to your computer and transfer the update.zip file to your SD card.
Hi guys thanks for all your help I have fixed my problem. All I did was use a windows 7 laptop and it worked.
Related
I have a MyTouch 4G rooted, with Ice Glacier 1.1.6 and I was trying to remove some files from my SD card and when i eject my phone, all the files i deleted appeared back onto the sd card. I tried everything to fix this problem. When i tried to format the card using a card reader, i get an error saying format wasnt able to be complete. i tried error checking as well. i am not able to add files to the sd card too. does anybody know what is going on??
thanks!
Try formatting it thru the phone.
Settings -> Storage -> Format SD Cards
just tried that, did not work. after i click format, the sd card would get mounted again and everything is still on the sd card..
this is what i have noticed, i can delete files using astro and it will stay off until i unmount it and mount it again. thats when the files appear back on the sd card.
Hmm... can you open the files on your PC?
yeah i can open files on my PC. this is weird. when i take pics, itll save onto the sd card but will be gone when i unmount or connect my phone to the computer so i can see the files on the sd card
I've heard of this once before. Solution was to put the sd card into an adapter and format with a camera.
format with a camera? meaning to plug this sd card in a digital camera and plug the camera into the pc then format?
No, format through the cameras menu options.
whenever i tried to turn on my camera with this messed up sd card in there, the camera doesnt even want to boot up....any other suggestions??
Sorry, thats all I got.
Sounds like a bad disk. Run a CHKDSK /f from your pc.
Sent from my HTC Glacier
chkdsk didnt work. at the end of the process, it says "disk error occurred during the writing of the file allocation" ??
It appears you need to go shopping. However, the SD card should be replaceable under warranty, unless our warranties specifically exclude the card. Call your local T-Mobile dealer and see if they'll replace it.
Yeah I think its time for a larger memory card anyway. So all I have to do is copy everything from my old memory card onto the new one that I will get then stick it in my phone right?
Sent from my HTC Glacier using XDA App
hi guys, i need your help
i install in my HD2 the windows phone 7 with mango 7720 version, but now i want go again to android...
so i do the task29 install the radio and finaly the the magldr v1.13.
Afetr that i made a mistake, i enter in services in magldr and do a Erease MBR of my sdcard... now i cant see my sdcard in any device, pc, phone, in photo camera, what else..!!
i try with another card in my pc and works but the original i use in phone i cant recongnize!
i need your help to solve this please
SD Formatter V3.1
Set to:
FORMAT TYPE as "FULL" (Erase or OverWrite -- I used "Erase"), set FORMAT SIZE ADJUSTMENT to "On."
worked on 2 cards I recovered for friends, so worth a try ...
PDF user manual: HERE
Mac version & other language user manuals can be downloaded: HERE
i will try thanks...
EDIT
Nothing do... because the windows 7 dosent install the driver this card so i cant select de drive in sdformater.
but with another sdcard the drivers install correctly...
[zozi] said:
i will try thanks...
EDIT
Nothing do... because the windows 7 dosent install the driver this card so i cant select de drive in sdformater.
but with another sdcard the drivers install correctly...
Click to expand...
Click to collapse
Perhaps try putting into a USB card reader or SD card adapter, then try seeing if the computer recognizes it.
scariola said:
Perhaps try putting into a USB card reader or SD card adapter, then try seeing if the computer recognizes it.
Click to expand...
Click to collapse
Yeah get yourself a SD card adaptor to put your SD card in and then put it in the SD card slot on your computer, or if you do not have one get a USB SD card reader to put the adaptor in. They will run you something like 8 to 10th dollars USD for both to get them.
Also your card is like this bot because you erased the MBR on your SD card. It is because on the first boot of WP7 it formats your memory card with a RAID format so it can use your SD card as internal memory. You have to do a low level format of the card to remove it. Once the low level format is done you will have to do a full format of it again with Fat32
This is for others that well read this, if you flash a WP7 ROM and it boots up but you so not like it or it does not work right. Do not, I repeat do not try flashing the ROM again or try flashing another WP7 ROM before doin the low level format and then a Fat32 format on your SD card. If you do you will probably end up with a trashed SD card.
Thanks i will try that..
No, i cant do nothing... i try with a external sdcard reader over usb and the sdformater just stops working when i start or do a refresh. i try with others sd cards and the new sdcard reader works good...
Any more ideas?
Ok, I have CWM and I can access it. I cannot read from my External SD Card to install a rom. I can access my Internal SD but I do not have a rom in there.
I cannot boot into the previous ROM since I erased everything and when restarting I get boot loops. I need the tablet to get back to work tomorrow.
Any help would be greatly apreciated.
I have a ROM downloaded in my PC but when I connect the A500 to the PC (via USB) I cannot mount it to copy it there and flash.
HELP please!!!
What version of CWM do you have. I think the new one can install ROM from USB drive. Also try reformatting the SD card in a PC in FAT32, some time its just that and some time tablet is picky what SD card it can read and what it cant.
shin lucifer said:
What version of CWM do you have. I think the new one can install ROM from USB drive. Also try reformatting the SD card in a PC in FAT32, some time its just that and some time tablet is picky what SD card it can read and what it cant.
Click to expand...
Click to collapse
I was able to put the SD Card from my phone and flashed the new rom. The tablet is sill not recognizing the SD Card though. I put it on my PC and it wont detect it (cant format it that way). I put it on my printer and I am able to read from it but I cannot format it. It tells me that is right protected.
I need to find another way of formatting it.
Thanks for your help.
I suggest you get a new sd card. Clearly the one you're trying to use is not working.
I'm not even sure if you can "write protect" an SD. Maybe something on the micro SD adapter perhaps (switch)? Or an option in Windows Explorer (check the sd's "properties". If it says "write protected", then turn it off.
Hello. Plz help.my note not recognize my sd card suddenly when i power off the phone then opened again. In addition the computer also suddenly nt recognize phone but the odin recognise when put it in USB debugging mode.also when open gallary it says SD card is in USB storage mode......thanks alot
does the sd card work in a different phone?
same here, my sd card works on other phone
Yes it works....also when opening camera it says turn off usb mass storage
But in recovery mood.it can read the sd when click on install zip from sd card
In recovery mode the inbuild memory is called sdcard, some not-stock recovery can separate between the two memories.
That said, your mentioning maybe wrong.
Is the card mSDXC, or regular mSDHC?
If there's nothing important on your card, try to format it inside the Note.
If there's important stuff on it, copy it to your pc (using a USB-SDHC-Cardreader) and format it inside the Note after that.
Sometimes the connection between the sdcard and the phone gets disturbed, so manual ejection of the sdcard out of the Note, cleaning the sdcard-contacts and putting it in again (repeat for 2 to 4 times) may help, too.
Regards
basem abojomana said:
But in recovery mood.it can read the sd when click on install zip from sd card
Click to expand...
Click to collapse
first: thank u, still the same issue even with other sd cards. i tried to install new rom by odin,it started progress but at the end of the progress it stopped at the word(hidden) in the box.
I have a 32Gb card installed in my phone and the Format card bit is greyed out. Any reason for this? Thanks in advance!
Hi,
i have problem with sd card
i dont have sistem installed and i cant mount sd card
when i connect phone to computer it doesnt recognize it
i tried in download mode but the same thing happens
i have CWM v 5.0.2.8 installed
when it try to mount sd card it says: unable to write to ums lunfile (no such file or directory)
Can someone help?
first backup any data you have on your sd card
connect sd card to pc via card reader
remove all partitions with minitool (google it) and create a new partition of fat32 and format it with minitool
next boot up your phone with the sd card in
goto
settings
storage
unmount sd card
erase/format sd card
now go into cwm - you sd card will now be mountable
you can then copy any backups back to sd card
An odin connection does not require an sd card - if odin is not connected you either dont have the usb drivers installed or you have a faulty usb cable/port
I think you didnt see that i have no system on mobile
I cant go to settings
jacky__ said:
I think you didnt see that i have no system on mobile
I cant go to settings
Click to expand...
Click to collapse
flash stock rom via odin - it doesnt require an sd card
if your odin doesnt show a connection under com id then you havent installed the usb drivers
you can format your sd on a pc via a card reader with mini tool as already explained