[Q] Droid X Issue (Ext. Batt., Otterbox, Touch Screen) - Droid X General

Hello, forum!
Just to cap my recent event... I purchased the ext. batt. for my Droid X yesterday. I put it in the back of my phone with the ext. batt. door. I put the phone in my Otterbox Defender Series. I understand that the case says that it does not work with the extended battery. Obviously, I didn't realize this until this morning. I never had to "force" the Otterbox together, though. It just went together like a charm.
The first thing that I noticed this morning was a bubble that would appear near the center of my screen when pressure is applied. Everything works. Touch still works in these areas. It's not visible until it has pressure on it. I just know that some screens can have the ripple bubble and be fine... While in others, it means trouble...
Now... Will this be an issue that will become worse and cause major problems? Or will it remain the same and I will just have a bubble when I press the screen. If it stays the same as it is now, I will be fine. The bubble isn't large at all. I just don't want it to suddenly crack and explode into a world of chaos. LOL!
Thanks!
-Dustin
Also... Any suggestions, comments, and opinions are always welcomed. Tell me what you would do. I appreciate the help and input from others.

I just ordered the extended battery with cover and I already have the defender series OtterBox. I'm glad I read this and I will report back my experience as soon as it arrives. Also, I have read elsewhere that people who have problems with this combination have just left the battery cover off since it's completely protected by an OtterBox anyway and have had no problems.

Yeah... I removed the door and used the Otterbox as its back. It hasn't completely removed the bubble. However, it appears that it has improved. It is barely visible now and seems to require more pressure. I'm gonna keep tinkering with it and see what results I can gather. Maybe we can figure something out. Thanks!
Sent from my DX with Liberty 1.0!

Just to update... I placed my X in the Otterbox without the battery door a couple of hours ago. The bubble has definitely gotten better. It wasn't instant, but it progressed to a better state. The battery, door, and Otterbox were together for about 8 hours before I picked it up and found the bubble. Maybe the pressure messed it up for awhile, but now that the pressure has been lightened... Maybe it will basically "fix" itself... ???... Hopefully I can post even better news about it later today. Either way, I just want everyone to dodge this issue or at least help them with the issue.
Thanks again!
Sent from my DX with Liberty 1.0!

My gf had that dot in middle of her Droid x, she took her otterbox off lastnight, this morning the dot was gone.
She said even if she had it off for a little bit the dot would still be there. Must take a few hours for it to stretch back out.
That being said, I squeezed the side of the phone with my hand and the dot reappeared until I let go...
Sent from my Nexus One using XDA App

The good news... I have to use way above the normal pressure to get the bubble to appear. That's pretty much with any screen on any device.
The results...
The Otterbox defender series says it WILL NOT work with the extended battery. If you remove the battery door and just use the extended battery, the Otterbox and phone are fine. The added door will create too much pressure. The Otterbox holds the battery well enough and still gives it room to expand as it heats up from normal use.
The screen has fixed itself and I no longer carry a worry about it. That's a huge plus.
I hope that this has helped someone out there. If anyone has questions or comments, please feel free to throw them at me. Post it here or send me a PM. I will help as much as I can.
THANKS!
Sent from my DX with Liberty 1.0!

Pretty good summary. I just got the Moto ext battery today (cover is coming separately). I put it in and the regular cover on just to see for myself and it fit ok, but any pressure gave the screen a big ripple effect. I took the cover off and put it on my OB Defender series with no battery cover and it requires excessive pressure to get any rippling so that'll work for me.
Sent from my DROIDX using Tapatalk

My GF doesn't have the extended battery but is still getting the bubble of the middle of the screen from the otterbox. Any possible fixes, or defective case?
Sent from my Nexus One using XDA App

zwade01 said:
Pretty good summary. I just got the Moto ext battery today (cover is coming separately). I put it in and the regular cover on just to see for myself and it fit ok, but any pressure gave the screen a big ripple effect. I took the cover off and put it on my OB Defender series with no battery cover and it requires excessive pressure to get any rippling so that'll work for me.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
So far, I have had no complaints on my end. It's working great! I was worried at first, but everything is going well. So you should be fine. If you do run into anything, please let me know and I will try to help you.
Sent from my DX with Liberty 1.0!

onesavior said:
My GF doesn't have the extended battery but is still getting the bubble of the middle of the screen from the otterbox. Any possible fixes, or defective case?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I have had my case for awhile... I never had an issue with it prior to my extended battery. One suggestion... Have you tried having the case on the phone without the battery door on the back of the phone? Other than that... When you place the case on the phone, try to see if it makes any unusual contact with the phone or other half of the case. I will check my phone out when I get a better break and see if I can gather more. Let me know your results if you try anything.
Sent from my DX with Liberty 1.0!

I would suggest a steady hand and a dremial tool. I know that will void the warranty on your box, but by moding your box you can use the door that came with the exstended battery. The only thing is, the silicone wrap will bump out a bit. Just a suggestion
RootedDX LibertyRom

Related

HELP: Battery stuck in DHD and won't slide out!

Man is this the stupidest problem ever...
The good news: I finally got my DHD yesterday...
The bad news: The battery cover is as bad as I've been hearing. For some reason I couldn't put it back on. So I pushed the Battery as far in as I could in order to put the cover on. The phone works great, but now the battery is stuck inside and won't slide out by itself and I don't know how to take it out
Please Help...
Put your fingers flat on the table, same width as the battery door.
Rest the DHD on your fingers (so that the battery door is facing the table.
Raise the DHD an inch or two and bring it down on your fingers (not so hard that it hurts).
Keep doing this, the battery will work its way free and drop onto the table.
I'll add a pic in a sec...
Thanks James, this definitely sounds very doable; I'm giving it a try now!
The battery has moved about half an inch now!! This is working *jumping up and down with joy*
I got the battery out!! Why does everyone else's battery just seem to slide out by itself? I thought it was because I pushed it too far in, but even when the battery is half way out, I still have to pull it out with some effort...
Maybe my phone just has a lot of "friction"? When I watch those YouTube videos, everyone seems to glide their fingers smoothly across the screen, but when I do it, it feels very fricative...do you guys put on hand lotion or something...
Do not press the screen too much, only a slightest touch is needed. Also if you have moist hands, it makes swiping the screen harder.
nubicurio said:
The battery has moved about half an inch now!! This is working *jumping up and down with joy*
I got the battery out!! Why does everyone else's battery just seem to slide out by itself? I thought it was because I pushed it too far in, but even when the battery is half way out, I still have to pull it out with some effort...
Maybe my phone just has a lot of "friction"? When I watch those YouTube videos, everyone seems to glide their fingers smoothly across the screen, but when I do it, it feels very fricative...do you guys put on hand lotion or something...
Click to expand...
Click to collapse
Probably because its a new phone. You have to play with it a little bit until the oil from your skin lubes up the screen. Then its all slidey slides.
I had a similar problem with my first DHD... part of the the plastic wrapper around the battery had folded back on itself along the forward edge of the battery. That caused the battery to get wedged inside. A little trimming of the plastic wrapper with a craft knife fixed it... YMMV
Sent from my Desire HD using XDA App
you sure you didnt put it back in upside down or something?
rossysaurus said:
you sure you didnt put it back in upside down or something?
Click to expand...
Click to collapse
I'm pretty I didn't because the phone was working but seriously I could totally go without the cover; the battery really gets stuck in there when it's inside!
nubicurio said:
I'm pretty I didn't because the phone was working but seriously I could totally go without the cover; the battery really gets stuck in there when it's inside!
Click to expand...
Click to collapse
No you can't - the WiFi/BT antenna is in that cover .
would've given you some extra grip tho
Now seriously, if when u look at ur battery there's no visible flaws that u can safely and/or easily remove and if your screen keeps giving you the finger in my opinion you should return it for a replacement. There's been enough faulty hardware cases, the folks at HTC know the drill by now. If that's not an option, sell it on ebay ( or your local online market ) and grab a new one;]
tkolev said:
No you can't - the WiFi/BT antenna is in that cover .
Click to expand...
Click to collapse
And I was wondering the whole time why that piece of plastic would cost 19 Euros!
bahkata said:
would've given you some extra grip tho
Now seriously, if when u look at ur battery there's no visible flaws that u can safely and/or easily remove and if your screen keeps giving you the finger in my opinion you should return it for a replacement. There's been enough faulty hardware cases, the folks at HTC know the drill by now. If that's not an option, sell it on ebay ( or your local online market ) and grab a new one;]
Click to expand...
Click to collapse
AWWW it's just my stupid, clumsy fingers are still trying to learn how to swipe across the screen...think I'm getting a hang of it now ...luckily no major flaws with my DHD so far *knock on wood*
Join the club and stay in
I got an aftermarket battery stuck in my DHD and had basically given up on getting it out until I found this thread. Nice work! Worked a treat after tapping it for what seemed like a couple of minutes.
Slow and steady wins the race!
Cheers guys

Dust under the screen

So I have noticed a fairly large grouping of dust has collected under my screen on the top left corner. Just wondering if anyone else has run into this and how did you get it taken care of?
Sent from my PC36100 using XDA App
ajk511 said:
So I have noticed a fairly large grouping of dust has collected under my screen on the top left corner. Just wondering if anyone else has run into this and how did you get it taken care of?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Happens to a lot of people including myself. I just deal with it since I can only see it during the day in the sun. You can take it to the spring store and they might fix it for you.
jxr94 said:
Happens to a lot of people including myself. I just deal with it since I can only see it during the day in the sun. You can take it to the spring store and they might fix it for you.
Click to expand...
Click to collapse
...or so you think:
http://forum.xda-developers.com/showthread.php?t=948417
I have recently noticed the same thing in the same upper left corner. I switched from my oversized battery and cover back to the original battery and cover to see if that helps prevent it from getting worse.
brandenk said:
I have recently noticed the same thing in the same upper left corner. I switched from my oversized battery and cover back to the original battery and cover to see if that helps prevent it from getting worse.
Click to expand...
Click to collapse
I've been using a different back as well, for the powermat charger. I wonder if that is what caused it. Well, off to the sprint store I guess. We'll see what they say.
Sent from my PC36100 using XDA App
I have the same problem in the upper-left hand corner. I didn't have an extended battery until today. Completely stock, even got the dust while I had my screen protector on. I do notice that my phone has what I think is called "screen separation". Sometimes when I press down on the screen, it feels strange like it is separated. Hasn't affected the operation of the phone, but it's not too big of a deal for me to take back to Sprint yet. I only notice the dust when the screen is completely black and in direct light, too.
ajk511 said:
I've been using a different back as well, for the powermat charger. I wonder if that is what caused it. Well, off to the sprint store I guess. We'll see what they say.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I actually noticed the dust under my screen about two weeks ago and have not made it to the sprint store yet. Should I even bother going there or are they not going to do anything for me? I have the Total Equipment Protection as well.
I've noticed dust under my screen as well. What sucks is the dust is right on top of the front facing camera ....maybe this weekend I will take it to the sprint store and see what they say.
Yeah I have it too, also have a blown speaker for the 2nd time -______-. I took it in to get fixed and they gave me a new screen (awesome) but forgot to put a earpiece back in. Looks like im just ignoring the 2nd time i got dust under the screen and gonna fix the rear speaker myself, or try to at least.
If they have any displays in stock, they'll replace it on the spot. Just make sure you tell them you want a brand new component. The store I took it too put a display that was all scratched up and nicked on the edges on my phone as if I wouldn't mind. How insulting!

Phone power shuts off when tapped or bumped.

I just noticed a moment ago that when I tap my phone hard enough it turns off. For example sliding the kb open or setting it down on a table hard enough. I have to be real gentle with it now. And I have never been very rough with it its in great condition. I dropped it once on carpet a few months ago. But that's it. I have 2 batteries and I switch them out every other day. Could that have something to do with it? I really do not want to goto the sprint store and have the look at it because ill have to flash back to stock and deal with their lines and annoying staff. Anyone know what I can do to fix this issue?
Sent from my SPH-D700 using XDA App
Is it possible that you thumped it hard enough to knock it unconscious? Just kidding, sounds like you have a short somewhere.
Sent from my SPH-D700 using XDA Premium App
screw that. flash it back to stock and take it in. i wouldnt be able to deal with that.
^^ I agree
However, take a look at your battery contacts. One of my 3 is noticeably bent "differently" but not necessarily broken than the other 2 (although it's NEVER lost contact even in a fall). Maybe it's not maintaining the tension it needs to keep the connection.
kycrop44 said:
I just noticed a moment ago that when I tap my phone hard enough it turns off. For example sliding the kb open or setting it down on a table hard enough. I have to be real gentle with it now. And I have never been very rough with it its in great condition. I dropped it once on carpet a few months ago. But that's it. I have 2 batteries and I switch them out every other day. Could that have something to do with it? I really do not want to goto the sprint store and have the look at it because ill have to flash back to stock and deal with their lines and annoying staff. Anyone know what I can do to fix this issue?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Happens to me when I close the keyboard too hard so I put a piece of thin cardboard between the cover and battery to secure it even more and no more problem.
kennyglass123 said:
Happens to me when I close the keyboard too hard so I put a piece of thin cardboard between the cover and battery to secure it even more and no more problem.
Click to expand...
Click to collapse
doesnt paper heat up the battery more? and i think the OP should place a claim on the phone (you should too). you people paid a lot for your phone and it should work (without putting cardboard)
alexnaoumi said:
doesnt paper heat up the battery more? and i think the OP should place a claim on the phone (you should too). you people paid a lot for your phone and it should work (without putting cardboard)
Click to expand...
Click to collapse
your right I did pay alot for this phone and it should work properly without ghetto rigging it. It actually stopped for now idk what did it, I tried a number of things including pressing the battery in harder and that may of solved it, but I bet it does it again one day. plus I wouldnt mind having a brand new one if thats what they would do to fix it lol
That happened to me a couple times, but it was the extended batteries and thus generic cover that doesn't fit well to begin with.
alexnaoumi said:
doesnt paper heat up the battery more? and i think the OP should place a claim on the phone (you should too). you people paid a lot for your phone and it should work (without putting cardboard)
Click to expand...
Click to collapse
Then don't cover the whole battery. Use a small strip runnin diagionaly and fasten it to back cover is it don't move around when u drop your phone again.
Try a little peice of paper in between the batt and the wall of batt hole.
Epoxy your battery in place.
Or u can stop abusing your phone.
Tell your phone your sorry..
Sent from my SPH-D700 using XDA App
alexnaoumi said:
doesnt paper heat up the battery more? and i think the OP should place a claim on the phone (you should too). you people paid a lot for your phone and it should work (without putting cardboard)
Click to expand...
Click to collapse
Not anymore than sitting on my hip. Paper is an insulator so actually would help in Florida sun. But my issue is a $21 extended battery and extended back, not stock. So a small piece of cardboard helps to keep it really tight. Also probably because I have dropped my phone a few times.
keith5039756827 said:
Then don't cover the whole battery. Use a small strip runnin diagionaly and fasten it to back cover is it don't move around when u drop your phone again.
Try a little peice of paper in between the batt and the wall of batt hole.
Epoxy your battery in place.
Or u can stop abusing your phone.
Tell your phone your sorry..
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
LMAO!!!! Nice...think I will download a flowers jpg for my phone now.
My first epic did this. It's a manufacturing problem. I took it back and sprint replaced it. (I returned it the day after I bought it, though).
I have had this happen to me and all I did was flash a different rom. It seemed to be a had flash or the rom I was using. That is assuming you are rooted and running a custom rom. Give it a try. Flash something else and see if the problem goes away. Mine did.
I was on my way into the sprint store as I was restoring a different rom and after restoring i could not reproduce the power down when bumping or sliding keyboard. That's how I figured out it had to be the rom. I have not had it happen since, that was 5 months ago.
desire s turns off
Ive had my desire s for less than 2 months and ive had to leave it back for this reason. The slightest of taps to the bottom right corner and off it goes.
Estimated return time from the car phone warehouse is 1 month. whahahahah....
Mine does the same thing, bougt mine off ebay, esy fix I just took a very small piece of electrical tape, made it so its sticky on both sides and stuc it behind the battery
Sent from my SPH-D700 using XDA App
I had this problem also. Mine was one of the three contacta on the phone broke. The brass contacts that touch the battery.
Sent from my SPH-D700 using XDA App
kennyglass123 said:
But my issue is a $21 extended battery and extended back, not stock
Click to expand...
Click to collapse
Same here! With the stock battery it works fine, but with the extended to hard of a jolt will reset it.

Desire HD battery cover.

Just to let other people know a little about my experiences so that it helps them.
Ok, normally when out and about I guard my phone quite fiercely, having lost many in the past due to theft, drunken stupidness or general carelessness. One evening last week, I was a little enebriated and on the way home had a fight with a bush. Phone came out of pocket and case, and hit the floor. I picked it up, checked for broken screen and put it back in its case and eventually got home in one piece.
Morning arrives, and I pick it up to make a call and noticed the phone battery cover was missing. I have ordered a replacement but have noticed some strange happenings since.
For example, although the battery may be in enough to keep the phone on (held with blutac right now) i noticed it wasnt charging. The led would come on and just flash green and orange, but no charge symbol. If I pushed the battery a little, it would then be ok. I also noticed when trying to use the camera, I would get a message saying something about the weather being too cold and not being able to use the flash. If I pushed the battery a little again, it would come back on.
The obvious problem I have until the cover arrives is wifi, as the cover has the wifi antenna on apparently so wifi connectivity is awful at the moment. Ive posted this in case anyone has anything similar and wondering what may be causing it.
Hope this is useful!
Thanks for making me laugh!
Are you sure you don't have a drinking problem
Thanks for the info anyway.
HAHAHA, maybe u should get yourself an otterbox for when u hit the sauce!
Order a silicon case/cover too with the batt cover .
But,to be serious, it is very much protective in case you have another fight with bush.
Sent from my Desire HD using XDA App
Trust me, it is not easy as it look to take care your phone..although your take care more than your life, eventually one day, it will drop from your hand to ground..its happen to me twice!!..first time happen, no case because i though i can protect my phone like my life, but i make mistake, I got 1 small chip near power button!!..2nd time it happen, thank god, i already buy the case, my phone is save, no chip or dented..haha..
Sent from my Desire HD using XDA App
Thanks for the laughs and the info
Sent from my Desire HD using XDA App
We need more 'developers' like you man)) thx for info anyway))

[Q] Battery cover removal/reinstall rating

Guys,
As the needs for extra juice without "downgrading" features, with preference to maintain slim profile for the handset, looks like an additional battery is a must.
Coming from Streak, the flimsy battery cover design for Note is new to me. It seems that it had exactly the same design as SGS 2, which I never owns. Streak's battery cover is made of metal, and if done carefully, battery cover removal/reinstallation in daily basis won't harm it.
Any ideas on Note's battery cover?
It's quite strong, I wouldn't worry about it:
www.youtube.com/watch?v=ErXqnQKs-tA
- Frank
not very difficult to remove. i just yank out the stylus and use the little corners there to get a few clicks off, then i just take it off from there.
the covers are very cheap anyways.
ChodTheWacko said:
It's quite strong, I wouldn't worry about it:
www.youtube.com/watch?v=ErXqnQKs-tA
- Frank
Click to expand...
Click to collapse
Omg it seems that the cover is indestructible! Thanks for the vids!
Sent from my GT-N7000 using Tapatalk
ChodTheWacko said:
It's quite strong, I wouldn't worry about it:
www.youtube.com/watch?v=ErXqnQKs-tA
- Frank
Click to expand...
Click to collapse
WHO-EVER says anything/comments about the SGS2 or Note's back cover I will just reply with that video. Just the link. Nothing more.
On a second thought I might even drop a line, like: "It might be cheap, but it's more durable than many phones as a whole."
Why do you think you need an extended battery on this phone?
I can use mine for two days of solid use without it dying.
I have both devices. The back plate will wear well.
Removal is easy on both, but reattaching is easier on the Note. You have to start at the bottom and work your way up to get all the fasteners to click properly. I've needed to remove it and restart on occasion with the SGSII. Not a huge deal but with the note, you can just put it in place and start mashing it down. No worries.
ZoinksS2k said:
I have both devices. The back plate will wear well.
Removal is easy on both, but reattaching is easier on the Note. You have to start at the bottom and work your way up to get all the fasteners to click properly. I've needed to remove it and restart on occasion with the SGSII. Not a huge deal but with the note, you can just put it in place and start mashing it down. No worries.
Click to expand...
Click to collapse
Thanks. But the fasteners, do they ever get loose or broken? On the plate or (hopefully not) the phone?
Sent from my GT-N7000 using Tapatalk
That would be very hard to do. The fasteners are on the plate, not the phone itself.
If you were to mangle something, you'd bend or crease a fastener. You could bend it back, or more severely, cut it off. There are enough fasteners where you could afford to loose one with minimal problems.
SNiiPE_DoGG said:
Why do you think you need an extended battery on this phone?
I can use mine for two days of solid use without it dying.
Click to expand...
Click to collapse
I always get the display to be the highest battery drain on my usage. It's almost 2-4 times of other components like Android OS, etc. So I'm not sure how I'm going to get longer uptime unless I stop using the screen -- which is the reason I bought it at the first place
Sent from my GT-N7000 using Tapatalk
ZoinksS2k said:
That would be very hard to do. The fasteners are on the plate, not the phone itself.
If you were to mangle something, you'd bend or crease a fastener. You could bend it back, or more severely, cut it off. There are enough fasteners where you could afford to loose one with minimal problems.
Click to expand...
Click to collapse
Perfect! Thank you!
Sent from my GT-N7000 using Tapatalk
There is a thanks button *just* a wee bit up the page
ZoinksS2k said:
There is a thanks button *just* a wee bit up the page
Click to expand...
Click to collapse
I swear there was something like thanks button on posts, but since yesterday the forum seems to change to a different theme. Not sure what happened, but thanks button or whatever it was on posts seems to be missing?
Even more curiousing it seems that image attachments are resized

Categories

Resources