[Q] DualBoot Wp7 and android? - HD2 Windows Phone 7 Q&A, Help & Troubleshooting an

Just Installed Windows Phone 7 on my HD2 and I was wondering if there's a way to Dual boot Windows phone 7 and Android Either SD builds or NAND builds.
Thanks in advance

Can you not run Haret or whatever other android loader you have from your wp7 file explorer? P.S. I haven't installed WP7 yet, I need to know if Dual Boot is possible

I can't even find a file explorer
so far I like really the looks of WinPhone 7 but I miss the Functionality

There is a guide for this under the android dev forums, its one of the stickies.

You can still run android from SD with magldr... you just have to either partition your sd card or switch sd cards used for wp7 and android. WP7 doesn't run winmo apps. And doesn't come with file explorer, but schaps made a file explorer called touchexplorer that you can install. Read around the forums, there are directions allover for this stuff. I have WP7 on my nand right now with a 16gb card, and I'm about to setup my 32gb card to run android off of.

Thanx, so I have an 8 GB card and i'm Currently runing WinPhone 7
I don't Know exactly how to partition it and the method to run android too is there a guide?
and will it be NAND or SD build?
and if both of them run will Both OS's be able to see same Music, Photos, etc.

http://forum.xda-developers.com/showthread.php?t=913815
Here's a guide.
And no, they won't be able to see same music or anything... they will be completely seperate partitions and can't read each other. WP7 will be on NAND and Android is ran from SD card.

Thank u so much
just another Question plz
Android can't be run from NAND also as a second operating system, it must be an sdcard build right?
Edit: Ignore that found the answer in the thread which is no it must be ran from SD
Thanx again

Related

[Q] [Q in need of A] Will installing NAND Android still allow me to run [SD] Android?

Title says it all
I am wondering that question as well..., how do you access the data/files on ya SD inside Android/NAND Android?
Well there's always file managing apps like Astro, but I'm not sure if it works that way, so, if someone could put kill our question!
Android is Linux based so there should be a similiar command to ls -a where you can see the files and be able to run SD Roms? Or I'm kinda hoping there is..., in SU maybe???
Thanks for the feedback bro, appreciate them.
We just need a response from actual experience; surely trying to run Android off SD wouldn't harm the device in any way.
I don't think we can boot an android build from an android build seeing as how clrcad and haret was build for winmo. >.> but looking at the magdlr notes, if i'm wrong, it has an option to boot android from SD or to boot from NAND, so guess that means you can have an android build in SD and NAND.
NEVER MIND... it failed the second time.
Yes but the build has to be built like a nand build. So you can't just boot the ones you have now.
http://forum.xda-developers.com/showpost.php?p=10202441&postcount=146
buzz killington said:
Yes but the build has to be built like a nand build. So you can't just boot the ones you have now.
http://forum.xda-developers.com/showpost.php?p=10202441&postcount=146
Click to expand...
Click to collapse
I just tried..., I done what I would normally do for an SD Build and used the NAND boot menu to try to run the SD Build. Even though there is an option which says you can run from AD SD..., it doesn't happen.
http://forum.xda-developers.com/showpost.php?p=10202441&postcount=146 <-- This makes sense ( no pun intended )
I understand that a Nand build on SD card will work the same as Nand build on phone, that makes perfect sense.
Question is, is the SD card memory used for application files or will it use up all the memory on my phone like Nand on phone does? Is it possible to use a data.img. Of course, the perfect solution would be to add the option in Magldr (Nand) to boot into recovery so the SD card could be partitioned for files and ext3 for extra application system files like we can with a normal Android phone. Then the need to add another Android rom onto the SD card just for extra storage would not be needed for us European users.
Sent from my HTC HD2 using XDA App

[Q] Can I use respectively Android and Windows Phone 7 OS on the two sd cards??

I'm wondering that if I have 2 sd cards, can I use Android and Windows phone 7 OS on each card respectively?
If I could, I would buy one more sd card for android.
Actually, I the most like Windows Phone 7 OS among Android, WP7, Meego and WM6.5.
Could anybody tell me about it pls?
The short answer is no.
You can run Android from your SD card and still have a Windows Mobile 6.5 ROM on your phone.
You can have an Android ROM flashed to your phone (NAND).
You can have WP7 flashed to your phone (NAND).
You cannot have two NAND builds flashed at the same time (e.g. Android and NAND).
Therefore the best you can do right now is to have either:
WinMo 6.5 AND Android, or
Android NAND, or
WP7
Your solution... buy another HD2
Yes, you can have WP7 on nand and attached with one sd card, and then use a different SD card to run android from. Android will not be on nand, but you can run it from sd with magldr. Thats what I'm doing so I have a lot of space for each os... I have my 16gb card for WP7, and my 32gb card I have several android builds working. Working great for me now! You have to make some changes to the init.rc file in most android builds to make them work, but there are a few that work as is. There's a couple stickied threads in the HD2 Android SD Development section.
Also, you can partition your SD card so you can have WP7 and android using the same card. Instructions also in the sd dev section.
nobnut said:
The short answer is no.
You can run Android from your SD card and still have a Windows Mobile 6.5 ROM on your phone.
You can have an Android ROM flashed to your phone (NAND).
You can have WP7 flashed to your phone (NAND).
You cannot have two NAND builds flashed at the same time (e.g. Android and NAND).
Therefore the best you can do right now is to have either:
WinMo 6.5 AND Android, or
Android NAND, or
WP7
Your solution... buy another HD2
Click to expand...
Click to collapse
You forgot WP7 AND Android from SD
Quite correct, sorry.

[Q] SD Card mode from NAND mode

Hello All....
I have installed android on my HD2, via NAND, and found that i suddenly ran out of space, and i cant install any apps. This is obviously due to a large rom, loaded onto the phone. I therefore started invetigating android via SD card. What should i do as precaution not to brick, or where can i find a guide to going to sd method from the NAND method.
Or alternatively, if you can help me with my partition sizes, for when i reflash android that i actually have some space. If someone can give me a breakdown of what the partitions must look like...
while this may be easy for others, i am a noob on the hd2-android..
a Speedy response would be highly appreciated...
thanks
Here is a decent walk-through on how to dual boot with Windows Phone 7 (with WP7 being on NAND and Android being on SD). He covers pretty well the partitioning processes that are needed. I haven't tried it out myself, cause my HD2 is being shipped to me currently.
http://www.youtube.com/watch?v=JTHRAUHZHlo
http://www.youtube.com/watch?v=xTMry4NEPTE
You don't have to partition your card for most SD roms. If the Rom requires partitioning it will tell you in the instructions. You can boot SD roms through magdlr as well. Just copy root folder of Rom ("Android") to root of SD, then in magdlr go to services>SD boot settings and ensure it is pointed at you Android directory. Then select ad sd boot and it should boot from there.
P.S. If you intend to keep your nand install, you will need to rename your Android sd folder to something other than Android. Be sure to change the directory in magdlr to match the new name of your folder. This worked for me. I am currently running a nand build and a sd build and both run great.
Cheers
What about apps to sd????
Sent from my HTC HD2 using XDA Premium App

[Q] Windows 7 and Android

Dear All Experts....
First of All Thanks to all.............
I have one question I have android 2.3.5 cynogenmod rom install on my htc hd2
on 16 GB card.... now i also want to taste win 7 on other card.....
Is it possible to use both Os without changing any setting while swaping the cards......
The HD2 (ATM) can't boot Windows 7.
But if you mean WP7, then no.
No because the HD2 can only hold one OS on its NAND, either WP7 or Android.
However, you can dual boot both OS's under two conditions:
1- It must not be a mango version (e.g nodo) .. because Mango locks up the SD and you can't use it for android. (AFAIK)
2- Android must be on the SD (an SD version).
Marvlesz said:
The HD2 (ATM) can't boot Windows 7.
But if you mean WP7, then no.
No because the HD2 can only hold one OS on its NAND, either WP7 or Android.
However, you can dual boot both OS's under two conditions:
1- It must not be a mango version (e.g nodo) .. because Mango locks up the SD and you can't use it for android. (AFAIK)
2- Android must be on the SD (an SD version).
Click to expand...
Click to collapse
Isn't there a SD card unlock for Mango ?
No its not possible to run both os off two sd cards
I got dual boot on my hd2 mango running as nand and android off the sd card
There is a storage unlock.cab file which partitions your sd card to whatever size you want to run android off the sd card after you flash mango..
Hi Moschino02
Can you tell me the Process for There is a storage unlock.cab file which partitions your sd card to whatever size you want to run android off the sd card after you flash mango..
Harshad3483 said:
Hi Moschino02
Can you tell me the Process for There is a storage unlock.cab file which partitions your sd card to whatever size you want to run android off the sd card after you flash mango..
Click to expand...
Click to collapse
a) Got to the back to future WP7 rom thread.
b) Read.
You just install the cab to unlock card and resize partition and then put your android files on the sdcard and boot android via magldr.
yeah but after i did that i cannot boot wp7.I use hyperdroid nand rom and yuki's mango build.Can anyone help i'm new in dual boot and i really dont know what to do but i want to fix it.If there is some way without flashing a stock rom and install the mango all the way from the beggining please share
I have clearly stated that you cannot boot Android (NAND) along with WP7, yet you tried to use HyperDroid NAND + WP7?
You need Android on your sd (refer to the SD development forum) and WP7 on NAND.

[Q] dual boot windows mobile 6.5 and android both from nand

Is it possible? I could only find threads about 6.5 from nand and android from sd, but i was thinking it should be possible to fit both to nand, and then use data2sd to send android apps and data to sd card, and install all wm apps to the sd card as well.
award982 said:
Is it possible? I could only find threads about 6.5 from nand and android from sd, but i was thinking it should be possible to fit both to nand, and then use data2sd to send android apps and data to sd card, and install all wm apps to the sd card as well.
Click to expand...
Click to collapse
Yes you can dual boot WP7 and Android, but on WP7 can be inn NAND. You have to run Android from SD card. This is the only way you can dual boot both OS's. Also you can not use apps to SD with WP7 like you can with Android. For one thing WP7 does not support removable storage at all, and two WP7 actually uses the SD card in the HD2 for the internal storage.
i know i can run wp7 and android -___- i am talking about running windows mobile 6.5 and android, both on nand, you must have misread my post
award982 said:
i know i can run wp7 and android -___- i am talking about running windows mobile 6.5 and android, both on nand, you must have misread my post
Click to expand...
Click to collapse
Sorry about that I did miss read it, actually when I read it last night your thread was right under a thread asking about dual booting WP7 and Android plus I had been up all night working on a bootanimation, must have been seeing double lol.....
Anyway though the answer is still the same pretty much. You can run Win Mo from NAND and boot Android from SD card. You can either do it the old fashion way by using the file explorer to open CLCAD and HARET, or you can install a dual boot app in Win Mo to do it with just. Do some googl searching and you will find several apps for this. Just so you know though you can only boot one OS from NAND no matter what OS that is.

Categories

Resources