Database Users

Howto boost sound volume

I have a MDA Vario. I would like to boost the sound volume. Is it possible to boost the volume in the windows register?
Thnx

I found some keys. The keys:
\\\registry\HKLM\Software\HTC\AUDIOGAIN(x)\
Speaker uplink volume
Headset uplink volume
Where (x) is nothing or 0, 1, 2
My speuker uplink volume was set at 26, I change that with 50, I think my speaker goes a bit harder, but I'm not sure..
Does anyone know if it really works, or has different techhnics?

smartphoneinfo said:
I found some keys. The keys:
\\\registry\HKLM\Software\HTC\AUDIOGAIN(x)\
Speaker uplink volume
Headset uplink volume
Where (x) is nothing or 0, 1, 2
My speuker uplink volume was set at 26, I change that with 50, I think my speaker goes a bit harder, but I'm not sure..
Does anyone know if it really works, or has different techhnics?
Click to expand...
Click to collapse
edit which one ? AUDIOGAIN or AUDIOGAIN0/1/2 ???

Any tweak available ? I have just installed the MS Voice Command, but the voice come out from the wizard is too quiet, I cannot hear clearly even I set the volume to MAX, I believe there should be some reg key can make it louder, and also the mic gain level, THanks if someone knows and post here.

rookery said:
Any tweak available ? I have just installed the MS Voice Command, but the voice come out from the wizard is too quiet, I cannot hear clearly even I set the volume to MAX, I believe there should be some reg key can make it louder, and also the mic gain level, THanks if someone knows and post here.
Click to expand...
Click to collapse
I agree. I would really be interested in learning how to make MS Voice Command louder without impacting system sound (if possible).
Thanks,
vespa

smartphoneinfo said:
I found some keys. The keys:
\\\registry\HKLM\Software\HTC\AUDIOGAIN(x)\
Speaker uplink volume
Headset uplink volume
Where (x) is nothing or 0, 1, 2
My speuker uplink volume was set at 26, I change that with 50, I think my speaker goes a bit harder, but I'm not sure..
Does anyone know if it really works, or has different techhnics?
Click to expand...
Click to collapse
i've had problems with microphone in my wizard. basically, people complained, that they can't hear me very well. i also found these registry keys, did some tests and changed RECEIVE_UPLINK_VOLUME and EARPHONE_UPLINK_VOLUME values to CC. after that change, microphone sensitivity got better and didn't receive any more complaints.

Eva_d,
What do you mean CC?
I have "0000 18" and "0000 19" repsectively.
Regards

gepol said:
What do you mean CC?
Click to expand...
Click to collapse
CCh = 204d

You still speak chinese
What do I change?
The "18" with 204d???

gepol said:
You still speak chinese
What do I change?
The "18" with 204d???
Click to expand...
Click to collapse
.....and in any case I change something it cames back without taking any changes ...

MSVC louder
to have MS Voice Command woman speak louder, edit these keys :
HKCU\ControlPanel\SoundCategories\VoiceCommand1\InitVol
and set it to 5
HKCU\ControlPanel\SoundCategories\VoiceCommand1\AttenuationCategory
and set it to 1
at least it worked for me (and for others from who I took this tweak)
good luck

gepol said:
You still speak chinese
What do I change?
The "18" with 204d???
Click to expand...
Click to collapse
no, change '18' to 'cc'. these values are hexadecimal.

eva_d said:
gepol said:
You still speak chinese
What do I change?
The "18" with 204d???
Click to expand...
Click to collapse
no, change '18' to 'cc'. these values are hexadecimal.
Click to expand...
Click to collapse
I do , but it ignores me and returns to 18 again. What am I doing wrong?

gepol said:
eva_d said:
gepol said:
You still speak chinese
What do I change?
The "18" with 204d???
Click to expand...
Click to collapse
no, change '18' to 'cc'. these values are hexadecimal.
Click to expand...
Click to collapse
I do , but it ignores me and returns to 18 again. What am I doing wrong?
Click to expand...
Click to collapse
same problem here, also I cannot get the following to work, (UPDATED) I can change the setting but using the DONE from the softkey, not the OK on the top.
HKCU\ControlPanel\SoundCategories\VoiceCommand1\InitVol
and set it to 5
On my 9100, it is already 5
HKCU\ControlPanel\SoundCategories\VoiceCommand1\AttenuationCategory
and set it to 1
changed it to 1 and softreset, cannot note any louder..... am I missing something ?
at least it worked for me (and for others from who I took this tweak)
can you post the link to the others forum so we can have more info???? Thanks a lot.
:roll:

vespa said:
rookery said:
Any tweak available ? I have just installed the MS Voice Command, but the voice come out from the wizard is too quiet, I cannot hear clearly even I set the volume to MAX, I believe there should be some reg key can make it louder, and also the mic gain level, THanks if someone knows and post here.
Click to expand...
Click to collapse
I agree. I would really be interested in learning how to make MS Voice Command louder without impacting system sound (if possible).
Thanks,
vespa
Click to expand...
Click to collapse
try the attached

here is a link on buzzdev : http://buzzdev.net/component/option,com_simpleboard/Itemid,59/func,view/catid,26/id,4816/#4816

gepol said:
eva_d said:
gepol said:
You still speak chinese
What do I change?
The "18" with 204d???
Click to expand...
Click to collapse
no, change '18' to 'cc'. these values are hexadecimal.
Click to expand...
Click to collapse
I do , but it ignores me and returns to 18 again. What am I doing wrong?
Click to expand...
Click to collapse
Eva_d????? Where are you ??? :lol:

gepol said:
I do , but it ignores me and returns to 18 again. What am I doing wrong?
Click to expand...
Click to collapse
i never had problems with reghacks returning to its previous value, so i'm not sure how can i help you. maybe you should try to switch off (i mean holding power button for more than 2-3 seconds) and on device than soft-reset it with stylus? that's what i always do and maybe this is right solution?

eva_d said:
gepol said:
I do , but it ignores me and returns to 18 again. What am I doing wrong?
Click to expand...
Click to collapse
i never had problems with reghacks returning to its previous value, so i'm not sure how can i help you. maybe you should try to switch off (i mean holding power button for more than 2-3 seconds) and on device than soft-reset it with stylus? that's what i always do and maybe this is right solution?
Click to expand...
Click to collapse
Thanks I will try

eva_d said:
gepol said:
I do , but it ignores me and returns to 18 again. What am I doing wrong?
Click to expand...
Click to collapse
i never had problems with reghacks returning to its previous value, so i'm not sure how can i help you. maybe you should try to switch off (i mean holding power button for more than 2-3 seconds) and on device than soft-reset it with stylus? that's what i always do and maybe this is right solution?
Click to expand...
Click to collapse
eva_d
I found a way through this, but please tell me... which setting did you tamper with?
AUDIOGAIN ?
AUDIOGAIN0 ?
AUDIOGAIN1 ?
AUDIOGAIN2 ?
To all?
Thanks

In Call Volume cab (I will donate if someone makes one)

I have a 8125(Wizard) and my wife has a 3125 (Startrek)
I have yet to find anyone that has a fix for Windows 6.0 and 6.1 to the low level of in-call volume. I have tried different headsets and every one of them has to be maxed for normal listening. Well try using it on a train or bus then. Very hard to hear.
I am willing to donate 30.00 to someone if they make an app or cab that will boost the volume of the in call (note not mic) when using them without a headset and with a bluetooth headset.
I'll also donate 50.00 if someone makes an application that works with all windows mobile devices with sliders for speakerphone levels, incall, mic, speakerphone and such. I'm sure there are many others that will also donate to this cause as everywhere i search people have "ideas" but nothing consistent, and they all seem to have failed for me.
If someone knows of an app that will do this for both Windows Mobile Pro 6.1 and Standard 6.1, i will donate it to the developer or purchase the program
Thanks.

http://forum.xda-developers.com/showthread.php?t=395695
Hey buddy please take a look at the above link. I bound it to a hardware button and while in a call I raise the volume by that button. I tnink you owe this guy some money.

kinmont said:
http://forum.xda-developers.com/showthread.php?t=395695
Hey buddy please take a look at the above link. I bound it to a hardware button and while in a call I raise the volume by that button. I tnink you owe this guy some money.
Click to expand...
Click to collapse
I've seen it but not tested it. The discription though doesn't say it will increase the volume as in boost. I'll watch that thread though and try it.

just use neuaudio or edit the audiopara file yourself. very easy to do.

I don't have an audiopara.csv file under windows on my phone..
I also installed nueaudio but i can't find a link nor sign of it. I have a wizard though and that utiltiy was made for the titan so i'm not sure if that is why.
Good thoughts though. Maybe it's the 6.1 AMP 2.0 rom i'm using. I'll check my wifes tonight.

The Q has a registry setting that can be modified to increase the volume. It's WM Standard and might apply to your wife's phone.

Hellou
http://pdaphonehome.com/forums/647390-post1.html
Maybe this may help

nonegiven said:
The Q has a registry setting that can be modified to increase the volume. It's WM Standard and might apply to your wife's phone.
Click to expand...
Click to collapse
and what might that be???

Legendary126 said:
and what might that be???
Click to expand...
Click to collapse
he means Moto Q

ather90 said:
he means Moto Q
Click to expand...
Click to collapse
He's asking what the registry setting might be, not the phone.

Final, Xperia volume fix?

I KNOW. there are many threads about this.
As you might agree with, the ring tone volume is one of the worst things with this phone.
I've looked everywhere for an anser to this question but they just keep complaining, not explaining.
The Xperia ringvolume is too low and i'd realy like some one to tell me how to fix this. Both in multimedia and when it rings.
I've tried the AudioPara3 and the SRS and neither worked.
please...

The volume on mine is plenty loud, you sure it's not the ringtones you are using? I have heard of people damaging the speaker with excessively loud sounds being played through it.

mtechfan said:
The volume on mine is plenty loud, you sure it's not the ringtones you are using? I have heard of people damaging the speaker with excessively loud sounds being played through it.
Click to expand...
Click to collapse
This is what half the peaple say
It depends on what you are use to.
My very old k500i is about the same as the Xperia but my last phone and the one before that (k850i, k800i) felt like more than double the volume of the xperia.
With the k850i i listend to some music once while driving the car and i had volume 7/10 and it was REALY loud and clear but now with the xperia i have it on max volume and it's barley hearble.
I know the speaker could do better because i tried converting a song with 600% volume and it realy went louder without any distortion at all.
I don't want to do this to every song i want to listen to since i have about 800 of them...

What baffles me most is the freaggin' speaker location. The handset is designed for right-handed use. However, the speaker broadcasts sounds on the left side of the handset (with slide closed). Therefore, it's easy to muffle any sound broadcast from the handset if cupped with the left hand. The scenario proves the same if trying to converse in speakerphone mode. You constantly need to re-adjust your hand in order to not muffle the sound.
I would agree that the speaker volume is softer the most SE handsets. I still have my 3 yr old P990i around which utilizes the same incoming call wave file. There is a very significant (at least 2:1) difference in volume between the two.

BigFeat said:
What baffles me most is the freaggin' speaker location. The handset is designed for right-handed use. However, the speaker broadcasts sounds on the left side of the handset (with slide closed). Therefore, it's easy to muffle any sound broadcast from the handset if cupped with the left hand. The scenario proves the same if trying to converse in speakerphone mode. You constantly need to re-adjust your hand in order to not muffle the sound.
I would agree that the speaker volume is softer the most SE handsets. I still have my 3 yr old P990i around which utilizes the same incoming call wave file. There is a very significant (at least 2:1) difference in volume between the two.
Click to expand...
Click to collapse
it really is terribly placed; that little slit is so easily completely sealed off by even a fingertip.

BigFeat said:
What baffles me most is the freaggin' speaker location. The handset is designed for right-handed use. However, the speaker broadcasts sounds on the left side of the handset (with slide closed). Therefore, it's easy to muffle any sound broadcast from the handset if cupped with the left hand. The scenario proves the same if trying to converse in speakerphone mode. You constantly need to re-adjust your hand in order to not muffle the sound.
I would agree that the speaker volume is softer the most SE handsets. I still have my 3 yr old P990i around which utilizes the same incoming call wave file. There is a very significant (at least 2:1) difference in volume between the two.
Click to expand...
Click to collapse
still doesn't help me fix the problem though.
my phone is on my desk i'm playing music and my hands are NOT in the way.

http://forum.xda-developers.com/showthread.php?t=511628&highlight=louder+speaker
You can find some useful information there. On most of the threads I have been through, most of the people recommend OPTXperiabeta02.cab.. Will try to find a link to download and post it here.. But, I haven't tried it myself yet, so don't kill me if it damages your speaker.. People who have used it said that they had to decrease the volume, so I would advice you to do the same

OPTXperiabeta02.cab here

I used this fix posted in another thread before.
IT Works GREAT, the volume is a lot higher than before!
It's called optxperia beta version 2 from http://ixperia.ru/soft/winmobile/51-opt-xperia.html
hope it helps!

Where can you find the app after you have installed it? Can't find it either in programs, nor in settings.. And it doesn't seem like the sound have improved any..

I find that cranking up the System Volume (not just the Ring Volume!) is a must when using mp3's as ringtone... otherwise it's v. quiet.

It should have prompted you for a reset after installing the app.
It can be found in settings -> remove programs -> it's called Auanti by Davide Gialli OptXperia

I just installed this and....wow, this may be too loud..lol good find. thanks a lot.

gundamboy said:
It should have prompted you for a reset after installing the app.
It can be found in settings -> remove programs -> it's called Auanti by Davide Gialli OptXperia
Click to expand...
Click to collapse
I removed it, and downloaded it from another site, and that one prompted for a soft reset. But I was just wondering whether you can edit the options (HOW much loader, if it only works when you receive calls, or also playing music, etc.)..? I found it on the location you posted, but there I can only remove it When I woke up this morning, the alarm sounded much higher than before, I had to turn the volume down, so I think its working quite well

Be careful with that cab - it does a fair few things:
1. Replaces 3d driver
2. Adds HTCAPI.dll to Windows (used by some 3d apps)
3. Replaces audiopara3 files (controls volume amongst other things)
4. Amends the threaded SMS layout
5. Replaces MMS settings
6. Turns off SIP autodeploy
7. Amends RAM cacheing etc.
8. Amends SD read settings
9. Changes Wifi g settings.
I'm sure they're all improvements on someone's ROM, somewhere but may end up messing up yours.
Seriously, get yourself MSCEInf and analyse these before installing - it's an extremely useful program. The only part you need is the audiopara3 csv files...

akp99 said:
The only part you need is the audiopara3 csv files...
Click to expand...
Click to collapse
Is there a guide to this akp?

Ok so definately increases volume?, but does that result in noticeable lack of quality? (ie do louder tones sound bad)
Would it be possible to install this after flashing to Touch it or Touch X rom for example? or would that be incompatible?
thanks

akp99 said:
Be careful with that cab - it does a fair few things:
1. Replaces 3d driver
2. Adds HTCAPI.dll to Windows (used by some 3d apps)
3. Replaces audiopara3 files (controls volume amongst other things)
4. Amends the threaded SMS layout
5. Replaces MMS settings
6. Turns off SIP autodeploy
7. Amends RAM cacheing etc.
8. Amends SD read settings
9. Changes Wifi g settings.
I'm sure they're all improvements on someone's ROM, somewhere but may end up messing up yours.
Seriously, get yourself MSCEInf and analyse these before installing - it's an extremely useful program. The only part you need is the audiopara3 csv files...
Click to expand...
Click to collapse
Thanks so much for the info. I installed this program awhile back, and though the volume is better, I've had little problems with my phone since. Do you know if uninstalling the program will change the settings back to what they were before? If not, I need to flash a new ROM, anyway.

Gibbs said:
Thanks so much for the info. I installed this program awhile back, and though the volume is better, I've had little problems with my phone since. Do you know if uninstalling the program will change the settings back to what they were before? If not, I need to flash a new ROM, anyway.
Click to expand...
Click to collapse
SAME HERE!! akp plz get back to us... i JUST did my recent flash and got everything installed and tweaked the way i like... and i stumble across this..
frustrating indeed..
do we need to re-flash. or can we just UN-install. and then get the right audiopara3 csv files that we need?

akp99 said:
Be careful with that cab - it does a fair few things:
1. Replaces 3d driver
2. Adds HTCAPI.dll to Windows (used by some 3d apps)
3. Replaces audiopara3 files (controls volume amongst other things)
4. Amends the threaded SMS layout
5. Replaces MMS settings
6. Turns off SIP autodeploy
7. Amends RAM cacheing etc.
8. Amends SD read settings
9. Changes Wifi g settings.
I'm sure they're all improvements on someone's ROM, somewhere but may end up messing up yours.
Seriously, get yourself MSCEInf and analyse these before installing - it's an extremely useful program. The only part you need is the audiopara3 csv files...
Click to expand...
Click to collapse
So much changes?? Hmmm.... gotta reconsider whether to install it then...

[TESTED 100% WORKING]Increase ALL of your X2's volume by 200%!!

This solution increases:
MICROPHONE VOLUME
IN-CALL VOLUME
SPEAKER VOLUME
RINGTONE VOLUME
MUSIC PLAYER VOLUME
and has been tested and working 100%
I've decided to share a ONCE-AND-FOR-ALL solution for all the X2 users and the general population of windows mobile users.
Here's the solution:
First, you need totalcommander. Google it.
1) Open TotalCommander
2) Go to ftp\\registry\HKCU
3) Change ALL the following to the value specified:
HKCU/Control Panel\Phone\vol\65535 (General volume of the X2 including microphone input!)
HKCU/ControlPanel/SoundCategories/InCall/Initvol\5
HKCU/ControlPanel/SoundCategories/Ring/5
HKCU/ControlPanel/SoundCategories/System/5
HKCU/ControlPanel/SoundCategories/Attentuation\All to 5
HKCU/ControlPanel/SoundCategories/InCall/InitVol\5
HKCU/ControlPanel/SoundCategories/Ring/InitVol\5
4) Soft-reset
5) Press the volume up key and set it to the 5th indicator (Max)
6) Press volume up key 1 more time, and you will hear an additional beep 200% louder and the indicator marker remains the same at the 5th marker on the top. This means you have sucessfully tweaked your volume!
6) Do step 5 again with in-call and congrats!
Enjoy your beloved X2 =)

I am satisfied with the default volume levels and will leave it as is.
Do note people, increasing output levels beyond the specified levels can damage your speakers!

sounds good. is it possible for someone to make a registry file of this? so we can just run it and it does it all for us noobs lol. (like the sd card fix)
although im not sure i need to increase the microphone input level, is it possible to leave that out.

Couldn't get totalcomander to work!!!! Which file did you download? It says if you have a touchscreen to download the pocket pc version...Did you download the installer or just the cab files? Thanks.

macklobell said:
Couldn't get totalcomander to work!!!! Which file did you download? It says if you have a touchscreen to download the pocket pc version...Did you download the installer or just the cab files? Thanks.
Click to expand...
Click to collapse
use some other app for registry change just google it ... this is ok for me..now l can acctually hear my phone when it is in the case in the pocket...super

royalbloodvi said:
3) Change ALL the following to value 5 in decimal
Click to expand...
Click to collapse
Hi, would you mind clarifying this value/number. In the first value my default is 65535... are you saying that this value should just be '5'. Not 55555?
thanks

tokyo78 said:
Hi, would you mind clarifying this value/number. In the first value my default is 65535... are you saying that this value should just be '5'. Not 55555?
thanks
Click to expand...
Click to collapse
leave it as 65535, corrections made.

i changed all the values you said,expcept HKCU/ControlPanel/SoundCategories/System/5
because i dont have it and nothing happends,volume is still the same.

i'm sorry but can u please make a cab file as i'm a noobie i don't want to stuff up my phone and have to do a master reset.

If your capable of making a cab file for this, trust me a lot of people will be happy and appreciate it.

If your capable of making a cab file for this, trust me a lot of people will be happy and appreciate it.

macklobell said:
Couldn't get totalcomander to work!!!! Which file did you download? It says if you have a touchscreen to download the pocket pc version...Did you download the installer or just the cab files? Thanks.
Click to expand...
Click to collapse
You dont have to use totalcommander. Since it is a registry tweak, you can use a simple Registry Editor that you can download from Windows Marketplace for free

Bro.
I think if the cab file available, it more pleasure like audiopara cab file
TQ

royalbloodvi said:
This solution increases:
MICROPHONE VOLUME
IN-CALL VOLUME
SPEAKER VOLUME
RINGTONE VOLUME
MUSIC PLAYER VOLUME
and has been tested and working 100%
Enjoy your beloved X2 =)
Click to expand...
Click to collapse
Doesn't work for me and I can't find HKCU/ControlPanel/SoundCategories/System.
Sucks, this is my only complaint with X2.

hey can you make a cab file for this registry?? much appreciated

Not working on mine!
Did not change anything noticable on mine!

michaelthemage said:
Did not change anything noticable on mine!
Click to expand...
Click to collapse
Didn't find any change.

No changes to my xperia x2 either..
I've been dealing with low volume issue of WM since my O2 atom but not for my Samsung Valencia (c6625), so I just copied all samsung's ringtones and alarms from my valencia and use it in my X2, hahaha . they are sound nicer and louder! SE could have done much much better providing us lots of (nice and loud) ringtones just like samsung did.

i have found a program that increases your volume

Many Many Many thanks to HS_LuKa_ i want to tell that the application is perfect and sound is very loud and if u receive error when run it first time just restart the phone ,
thanks again HS_LuKa_

Alarm sound is too loud !!!!

Does anyone else noticed this ?
The Alarm sound is too loud and cant be changed using the main volume !
Any idea why its like that or any fix for it !

Install reg editor
[HKEY_CURRENT_USER\ControlPanel\Volume]
"MaxdBAtten"=dword:2D (2D = 45)
change the value from 45 to 70

It seems ChevronWP7 doesnt work anymore for me , is there anyother way to do it ?
I cant install anything on the phone other than MarketPlace apps

ChevronWP7 works for everyone, close all your dropbox, antivirus, itunes, firefox, iplayer etc...CNTRL ALT DEL windows task manager, kill selected programs.

after installing a reg editor, im glad my wp7 looks a bit more tinkerable
also theres some sort of hiss that apparently has been around since the high volume bug, but only noticed now when level 1 is much softer
this hiss reminds me of those cheap ass logitech speakers I have when theres no sound playing lol, i hope this can be fixed in the future...

THUDUK said:
Install reg editor
[HKEY_CURRENT_USER\ControlPanel\Volume]
"MaxdBAtten"=dword:2D (2D = 45)
change the value from 45 to 70
Click to expand...
Click to collapse
I have tried this and performed a reset and the alarm volume is still a lot louder than any other system sounds. Is there something that I'm missing? or another method?

Same problem...
I have the same issue.
Out of the box the the main volume for music, ring and in call volume can be controlled via the main control but the notification and alarm volume is very high and seamingly independant from the main volume level.
After tweaking the registry value:
HKEY_CURRENT_USER\ControlPanel\Volume\MaxdBAtten
... from 6 to 80 the overall system volume decreased including system notifications but the alarm sound is still much higher than all other levels. I never sleep through it anymore - which is a plus - but dropping it slightly would be nice.

Same thing here... I'm scared out off sleep That's not very plesent.
Any registry tweak for this situation?

For me this worked (for 50% sound volume):
HKCU\ControlPanel\SoundCategories\Alarm\InitVol = 50 (integer)

cardiolan said:
For me this worked (for 50% sound volume):
HKCU\ControlPanel\SoundCategories\Alarm\InitVol = 50 (integer)
Click to expand...
Click to collapse
Great registry tweak!
The loud alarm sound was the last really annoying bug in the first release of the DFT WP7 ROM.

okay so someone guide me plaese, i lovw WP7 but im currently on andriod cuz of the volume issue & the camera.
how do i adjust the super ultra loud volume?
and how do i fix the loud alarm?

guide...
Make sure your pc has Zune 4 and .netframework 4 installed (.net is needed to run chevron and "TomXAPdeployer")
1. unlock your handset with chevron.
2. Use an "TomXAPdeployer" to install a registry editor to your handset. It's available on XDA if you serach a bit (i've attached below -just remove the ".zip" extension at the end of the filename).
3. Make the following registry chage to reduce the violume of your notifications:
[HKEY_CURRENT_USER\ControlPanel\Volume]
"MaxdBAtten"=dword:2D (2D = 45)
change the value from 45 to 70
4. Create this registry entry to reduce the volume of the alram:
[HKCU\ControlPanel\SoundCategories\Alarm]
"InitVol = 50 (integer)"
You might need to reboot your phone just to tidy everything up.
The tweaks work well.

I did it the harder way? Went to marketplace and downloaded the Media Volume setting on the free trial. Works a treat for me.
Maybe I should try the easy way, of changing reg files tweeking things?? NOT.

Hmmm
I did looked at that App, as far as i can see it just chages the registry vlaues for you to suit certain profiles.
Seems like a nice app - but changing the reg values manually saves a few pence and avoids having to install another piece of software...
What ever way works best for you.

cardiolan said:
For me this worked (for 50% sound volume):
HKCU\ControlPanel\SoundCategories\Alarm\InitVol = 50 (integer)
Click to expand...
Click to collapse
This worked great for me, although i used (InitVol = 25) that made it quieter for to my liking. Thanks for the tip!

Is there any way to edit Mango Registry and adjust that effin Alarm Volume?
It's late now, need get up early tomo and goin back to WinMo cuz of that crap...

coderiter said:
This worked great for me, although i used (InitVol = 25) that made it quieter for to my liking. Thanks for the tip!
Click to expand...
Click to collapse
it's work for me too, i'm using mango 7.5.
thanks mate.

Am I reading this right that people are complaining the alarm is too loud? It's an alarm, it's supposed to be loud.