Related
Hi guys, I'm one of the many people having problems connecting to the internet over wifi with a proxy. I just can't get it to work. I am using my university wifi network, and I can connect to the network fine, access the login pages, and browse the university intranet fine, but cannot connect to any outside pages.
The uni provides a PAC file (and strongly recommends it's use) but there doesn't seem to be any way to use this in 6.1. Does anyone know of an app or anything that can configure proxy using a PAC file?
(I have tried connections-connection-advanved-select networks-new and entering the proxy manually but just doesn't work.)
Cheers.
Same problem here...
Not sure about the PAC file but you can use TransProxy or AutoProxy to configure the proxies in your phone. Open the PAC file using a Notepad and it should show you the Port and IP address of your Proxy Server. Use that information while configuring the proxy software.
I know this is old, but this is an ongoing problem and I figured out how to use a .pac proxy file! After reading about proxy's and what .pac files are, I stumbled upon a little hint and after a little tinkering I was able to use my work's wifi that uses an auto-config .pac file and my phone and tablet has full internet access with browser, apps etc including Netflix for example.
Here are the steps you need:
1) Your phone has to be rooted to take advantage of the proxy apps on the market, I personally use ProxyDroid, which is free and has a feature to bind certain proxy profiles to automatically turn on when a certain wifi network is connected.
2) Usually there is an option that gives you an http proxy pac file to manually input to your browsers or what not, so whatever the link is, put it an active internet browser to download the pac file (an example of the url with the pac file would be something like http://internet.xxxxx.com/proxy.pac)
3) Where ever you download the pac file, open it with notepad or wordpad and this will reveal all the proxy info you need in order to access the proxy enable wifi. What the ProxyDroid app needs from the PAC file is the Host url and Port number. When you open a PAC file in notepad, you'll see something like this near the top along with a bunch of other things under it:
"Cisco Remote Envelope Service
if (dstHost=="internet.e-mail") {
return "PROXY internet-x-x.xxxxxx.com:9090""
- So in "Host" under Proxy Settings in the ProxyDroid app you would input: internet-x-x.xxxx.com
- For the "Port" you would put input: 9090
4) After inputting those 2 pieces of info into the ProxyDroid app, turn the wifi on for your Android Device then enable to ProxyDroid app, you should able to connect to the proxy enabled wifi!
*Some notes for the ProxyDroid app.
- It allows for Authentication, but since my work wifi does not use that, I'm not sure how it would work
- For Proxy type, I set it as an HTTP
- I binded the specific proxy profile to my work wifi so it would ProxyDroid would automatically enable when work wifi was detected
Hope this bit of info helps other that have Android devices and were unable to use a proxy enable wifi to finally access them. Hopefully in the future, Android will make using proxy and pac files a lot easier like how it's done on the ipad where they allow you to manually set up proxy settings by having the device download the PAC file.
This works on both a rooted AT&T HTC Inspire and a HP Touchpad running CM7 Alpha
If anyone is reading this, there is an easier way. Check out Autoproxy on the market. You can add a new proxy, put in the address to the proxy.pac file, and it will connect to the correct proxy everytime.
That's also useful if you're on a network where they keep changing the proxy (like the place I work). It auto-connects to the proxy when you're on that network, so it's set and forget.
Thank you, dtothesquare. I finally managed to connect my Galaxy S to my university's wi-fi, something that I couldn't do for over a year. The university doesn't officially support Android. I must have done dozens of Google searches to find this. Your advice really works, I'm so happy!
I have a stock Samsung Vibrant. It connects to my home wifi network just fine and is very fast.
At my school we have to register the mac address' of devices we have on their Clean Access servers. I have registered many devices that work fine.
I registered the mac address of my Vibrant, and it can connect to the wifi, but it will not load a web page. Does anyone have any idea of what is wrong.
I also registered my roommates Vibrant. His does not work either.
I work at the Schools Tech Support so I have access to register and edit my phone on their Clean Access servers.
Does anyone have any solutions?
are you using WPA/WPAv2 or WEP + RADIUS authentication? Does your vibrant obtain an IP address successfully? Can you ping the default router?
The wifi that works at my apartment is WPA2.
The wifi at school is an open network. I can fully connect to their wifi.
Status Connected
Speed 48Mbps
Signal Strength Good
Security Open
IP address (a real IP address)
Im going out on a limb here. I am going to say its the Clean access and your "open network". I assume on your schools computer you use your student ID and some password. Your phone would need the same thing if that is the case. I know at my school, iphones are the only phones that can access our clean access. If its not the case then i am sorry.
my school runs clean access and it works fine. but they have two networks a guest and a login. i use the guest cause i don't want to waste the time to login. but i can try it on monday. typically with linux (i.e. android) you have a web portal and have to agree to some antivirus bs by clicking a button and that's it (and login for the non guest network). one thing i have noticed, though, is that typically i have to turn wifi on, connect to the network, try to load a page, it doesn't work, then i turn wifi off then immediately back on and try to load a page and it takes me to the login/terms portal page.
GTASouthPark said:
The wifi that works at my apartment is WPA2.
The wifi at school is an open network. I can fully connect to their wifi.
Status Connected
Speed 48Mbps
Signal Strength Good
Security Open
IP address 140.209.21.68
Click to expand...
Click to collapse
You should remove the IP from post. Anyways, it seems like the handshake is good. Note down the address of redirected terms and conditions page you get when trying to go online from a laptop. Then enter the same address in vibrant's browser once you are connected through Wifi ( or set it as homepage) and see if that lets it through.
Probably an issue with Android's lack of native NTLM support. AFAIK this is still unresolved. Have you tried using Fennec rather than the stock browser? I've heard you can authenticate properly using it.
Siks said:
Probably an issue with Android's lack of native NTLM support. AFAIK this is still unresolved. Have you tried using Fennec rather than the stock browser? I've heard you can authenticate properly using it.
Click to expand...
Click to collapse
interesting. i use dolphin hd and it works for the clean access web authentication page.
Could be, if your school does not have a guest account login for devices, that you are getting on the segregated network because CA cannot verify the "cleanliness" of your device. When I setup CA it verified patch levels and such on the non-guest network, so unless CA comes out with a Android client/access list, it may not work.
watcher64 said:
Could be, if your school does not have a guest account login for devices, that you are getting on the segregated network because CA cannot verify the "cleanliness" of your device. When I setup CA it verified patch levels and such on the non-guest network, so unless CA comes out with a Android client/access list, it may not work.
Click to expand...
Click to collapse
except then it wouldn't allow osx or linux. clean access requires an app for windows to verify service pack and av and whatever, but for linux and osx it doesn't. it wouldn't be able to (at least for linux).
funeralthirst said:
except then it wouldn't allow osx or linux. clean access requires an app for windows to verify service pack and av and whatever, but for linux and osx it doesn't. it wouldn't be able to (at least for linux).
Click to expand...
Click to collapse
That is correct but it can ID the operating system and has exceptions for those flavors ...
Hey it's me again.
I don't think it's an android thing because I had my G1 on the servers.
Normally what happens if you aren't registered on Clean Access is, if you open a web browser, you will be automatically redirected to an authentication page where you put in your school ID and password. This would work fine and allow me to get on the wifi, but it never came up on the web browser, it just tries to load the page for awhile and goes to a 'Page cannot be displayed' page.
Also I have tried using different browsers, including Dolphin HD.
If I can just get to the authentication page even it will be fine, I could work with that.
Also the school does have a guest login, but you have to get to the authentication page, and I wouldnt want guest access since it limits time, bandwidth, and features.
That is exactly what I said my last reply...Try putting https infront of your authentication URL, and make sure the java-script etc. is on in your browser...Try clearing cache and hit refresh as well. Also, see what happens if you set that URL as homepage...
GTASouthPark said:
Hey it's me again.
I don't think it's an android thing because I had my G1 on the servers.
Normally what happens if you aren't registered on Clean Access is, if you open a web browser, you will be automatically redirected to an authentication page where you put in your school ID and password. This would work fine and allow me to get on the wifi, but it never came up on the web browser, it just tries to load the page for awhile and goes to a 'Page cannot be displayed' page.
Also I have tried using different browsers, including Dolphin HD.
If I can just get to the authentication page even it will be fine, I could work with that.
Also the school does have a guest login, but you have to get to the authentication page, and I wouldnt want guest access since it limits time, bandwidth, and features.
Click to expand...
Click to collapse
did you try turning on wifi, wait for it to connect, try to load a page (any page because it will redirect you), wait for it to time out, pull down the notification bar, turn wifi off, turn it back on and then reload the page? i know it sounds dumb, but this is the only way i've got it to work at my school and it works every time...
watcher64 said:
That is correct but it can ID the operating system and has exceptions for those flavors ...
Click to expand...
Click to collapse
to what flavors? i'm guessing android will show as linux since it's based off a linux kernel. more than likely it checks for windows, and if false goes to the default linux/osx page because to clean access those aren't threat os's.
VICosPhi said:
That is exactly what I said my last reply...Try putting https infront of your authentication URL, and make sure the java-script etc. is on in your browser...Try clearing cache and hit refresh as well. Also, see what happens if you set that URL as homepage...
Click to expand...
Click to collapse
they don't have the authentication URL on their homepage so I don't know what it is, it should automatically redirect me to it.
Also when I connect to wifi, try to load a page, let it time out, turn off wifi, turn it back on and connect again, and then refresh the page.. nothing happens it times out again.
Ok so I did find out the authentication page URL. Typed it into my phone. I had high hopes when a page saying "You are being redirected to the network authentication page. If you are not redirected automatically, then please click HERE".
Anyway it did redirect me, to a "Web page not available"... etc.
In the default browser it gave me the error... "Data connectivity problem. A secure connection could not be established". umm wtf?
Can you communicate with other protocols/ports? I used to be able to exploit a bug with our school's CCA servers where I could just connect unauthenticated and use SSH. (Maybe it was a feature?)
I can't use any other web protocols.
Bump. Okay. I've figured out how to do this . '
it's a t mobile vibrant either kernel or rom problem. My phone connected the very first time I tried to use it at an argosy site, then never ever ever again.
so. I used wifi manager to find out what the ip, gateway, subnet mask, and dns 1 and 2 were. I went to settings, wifi, options key to go to advanced options, from there selected static ip and entered all the info I gathered
bam! ! Connected every time.
Oh and btw, the reason I say its a tmobile vibrant rom or kernel problem is that on fusion, Eugene's and bionix final, I was able to connect right away, every time . And on my f friends att fascinate and verizon captivate, they never had to enter the static ip like I did. They connected right away every time . Yet everyone I know that had s vibrant kept having the same proble. m i did .
Tmobile. What a piece of ****. Anyway I figured nobody had this figured out so I'd jump in.
Hope this helps out some people. GL
If you're like me, then you have a data plan with T-Mobile that includes only 2.5GB of data for tethering. After you 2.5GB is up,T-Mobile begins redirecting all of your tethered traffic to a webpage prompting you to buy more tethering data.
T-Mobile does this by reading all of the headers on every HTTP request. It analyzes each one and reads the User-Agent string. This is what tells websites how to deliver their content for you and is why you only get mobile versions of webpages on your phone and not on your laptop. So, many people got around this by spoofing the user agent with a browser plugin to make it look like your laptop was requesting the mobile version of websites (so T-Mobile would think that it's a phone requesting the data, not a tethered laptop.) However this solution only works for that specific browser. Other browsers, applications, and devices that do not support User-Agent spoofing were left without a solution. Was I really the only one trying to tether my PS3 for Netflix and gaming?
So some people turned to VPNs which basically act as a secure proxy so that T-Mobile could not read the traffic and tell what the User-Agent was. But this often costs money and/or slows down your network speed. Seeing as how people who are looking for a tether workaround are trying to not spend money, and are trying to use T-Mobile's lightning fast LTE, this isn't really a practical solution.
So after spending hours and hours looking for a solution, I came to the conclusion that there was none yet.
I deduced that the obvious solution would be to modify the packets on the fly and change the user-agent string of every HTTP request as it came to the phone before forwarding it on to T-Mobile. Luckily for us, all HTTP requests that have no User-Agent string or a string of "null/null" etc. are automatically accepted! So all that needed to be done was to strip the user-agent string of all of the outgoing HTTP requests - on the fly.
My first thought was that hopefully there was an android app that could do this.
There isn't.
And I am not capable of making one but if you find one or can make one, please tell me and I will adjust this explanation because that would make things a bit simpler. However, since we don't live in a perfect world, we have to run a program on a computer and route all traffic through that program. This wonderful little program that I came across called "Fiddler" (it won't let me post the link but it's www[dot]fiddler2[dot]com) is just what we need. It's a completely free program.
Go download and install fiddler. This program will allow us to monitor and 'fiddle' with the network traffic on the fly!
First, fire up your tethering app on your phone and connect your computer. I personally use android WiFi tether but I suppose it probably doesn't matter which one you use. Once you've connected your computer. Open up fiddler, go to "Rules," "User-Agents," and select "Custom..." A window will pop up. Leave this blank and click okay. Now, all of the network traffic from that computer with have its user-agent string modified to "User-Agent:[blank]" Test this out on any browser on your computer and you should not be redirected to the upsell page.
Now for all of your other devices! I was particularly concerned with my PS3 but any device that supports proxy use will work. That's a hell of a lot more devices than the number that support UA spoofing haha. Go to "Connection Settings" on your PS3 and select "Manual"
Go through your setup as usual and connect to your phone's wifi hotspot. When you come to the page that says "Proxy Settings" select "Use"
For the IP address go back to your computer and look at Fiddler. In the top-right corner there is an image of two computers and it says "Online" next to it. Hover over that icon and it will have an IP address listed. This is the virtual proxy that Fiddler has set up for auxillary incoming traffic on the local network. Type that IP address into the PS3's proxy settings and use port 8888 (you may have to configure your computer firewall to allow incoming traffic on that address/port)
Also, in Fiddler go to the AutoResponder tab and check the box that says "Unmatched requests passthrough." This is so that HTTP requests that come in without a User-agent already defined will just be passed on. If this box is not checked you may get frequent 404 errors.
Finish up the connection settings on the PS3 and let it fly! You can watch the traffic on Fiddler in real time!
This is my first post on XDA and this workaround is brand new as far as I can tell so there may be some kinks that need to be worked out.
Let me know if you have any questions or problems!
Respectfully,
Hunter.
TexasState said:
If you're like me, then you have a data plan with T-Mobile that includes only 2.5GB of data for tethering. After you 2.5GB is up,T-Mobile begins redirecting all of your tethered traffic to a webpage prompting you to buy more tethering data.
T-Mobile does this by reading all of the headers on every HTTP request. It analyzes each one and reads the User-Agent string. This is what tells websites how to deliver their content for you and is why you only get mobile versions of webpages on your phone and not on your laptop. So, many people got around this by spoofing the user agent with a browser plugin to make it look like your laptop was requesting the mobile version of websites (so T-Mobile would think that it's a phone requesting the data, not a tethered laptop.) However this solution only works for that specific browser. Other browsers, applications, and devices that do not support User-Agent spoofing were left without a solution. Was I really the only one trying to tether my PS3 for Netflix and gaming?
So some people turned to VPNs which basically act as a secure proxy so that T-Mobile could not read the traffic and tell what the User-Agent was. But this often costs money and/or slows down your network speed. Seeing as how people who are looking for a tether workaround are trying to not spend money, and are trying to use T-Mobile's lightning fast LTE, this isn't really a practical solution.
So after spending hours and hours looking for a solution, I came to the conclusion that there was none yet.
I deduced that the obvious solution would be to modify the packets on the fly and change the user-agent string of every HTTP request as it came to the phone before forwarding it on to T-Mobile. Luckily for us, all HTTP requests that have no User-Agent string or a string of "null/null" etc. are automatically accepted! So all that needed to be done was to strip the user-agent string of all of the outgoing HTTP requests - on the fly.
My first thought was that hopefully there was an android app that could do this.
There isn't.
And I am not capable of making one but if you find one or can make one, please tell me and I will adjust this explanation because that would make things a bit simpler. However, since we don't live in a perfect world, we have to run a program on a computer and route all traffic through that program. This wonderful little program that I came across called "Fiddler" (it won't let me post the link but it's www[dot]fiddler2[dot]com) is just what we need. It's a completely free program.
Go download and install fiddler. This program will allow us to monitor and 'fiddle' with the network traffic on the fly!
First, fire up your tethering app on your phone and connect your computer. I personally use android WiFi tether but I suppose it probably doesn't matter which one you use. Once you've connected your computer. Open up fiddler, go to "Rules," "User-Agents," and select "Custom..." A window will pop up. Leave this blank and click okay. Now, all of the network traffic from that computer with have its user-agent string modified to "User-Agent:[blank]" Test this out on any browser on your computer and you should not be redirected to the upsell page.
Now for all of your other devices! I was particularly concerned with my PS3 but any device that supports proxy use will work. That's a hell of a lot more devices than the number that support UA spoofing haha. Go to "Connection Settings" on your PS3 and select "Manual"
Go through your setup as usual and connect to your phone's wifi hotspot. When you come to the page that says "Proxy Settings" select "Use"
For the IP address go back to your computer and look at Fiddler. In the top-right corner there is an image of two computers and it says "Online" next to it. Hover over that icon and it will have an IP address listed. This is the virtual proxy that Fiddler has set up for auxillary incoming traffic on the local network. Type that IP address into the PS3's proxy settings and use port 8888 (you may have to configure your computer firewall to allow incoming traffic on that address/port)
Also, in Fiddler go to the AutoResponder tab and check the box that says "Unmatched requests passthrough." This is so that HTTP requests that come in without a User-agent already defined will just be passed on. If this box is not checked you may get frequent 404 errors.
Finish up the connection settings on the PS3 and let it fly! You can watch the traffic on Fiddler in real time!
This is my first post on XDA and this workaround is brand new as far as I can tell so there may be some kinks that need to be worked out.
Let me know if you have any questions or problems!
Respectfully,
Hunter.
Click to expand...
Click to collapse
Yeah, that's a workaround indeed, however the setup is long and extensive for anyone. We're still trying to find a QUICK solution that doesn't require a mass setup of every device. I only bounce to my tethering when there's an outage at home or I'm on the road, neither are the best solutions to be spending time switching everything over when I could have just as easily opened the browser on my phone to take care of everything. I found this post from the link you posted in the other thread where we weren't discussing hard solutions, just concepts and ideas, theoretical solutions (hence why there was never a post like this there). It's great to see that the one thing we know is the catalyst has been confirmed once again (HTTP USER-AGENT) as what T-Mo and every other carrier is doing, so this is a solution for not just T-Mo, but every provider. Again, it's a hell of a setup and requires that you keep at least one computer active during the ENTIRE tethering session, also, it appears T-Mo doesn't block Playstation 3 from what I can tell, at least we were able to watch like 3-4 hours of Netflix when we had the 500mb tethering cap without a problem.
This affect nat type? If I use this program? Ps3 online game though
Sent from my SGH-T889 using XDA Premium 4 mobile app
It seems T-Mobile has caught onto using different agents. I was trying to use mobile hotspot on my laptop yesterday. It didn't matter if my UA was android handset or Googlebot, it redirected me to a hotspot upsell page.
Dr. Hax said:
It seems T-Mobile has caught onto using different agents. I was trying to use mobile hotspot on my laptop yesterday. It didn't matter if my UA was android handset or Googlebot, it redirected me to a hotspot upsell page.
Click to expand...
Click to collapse
Go into your APNs and select the tethering APN, if you can edit the hostname from epc.tmobile.com to fast.t-mobile.com or whatever your normal APN is, there are a bunch of threads talking about how to get tethering working, this is just the LAST step, don't come here thinking this is the FIRST step, you're going at it backwards.
TexasState said:
If you're like me, then you have a data plan with T-Mobile that includes only 2.5GB of data for tethering. After you 2.5GB is up,T-Mobile begins redirecting all of your tethered traffic to a webpage prompting you to buy more tethering data.
T-Mobile does this by reading all of the headers on every HTTP request. It analyzes each one and reads the User-Agent string. This is what tells websites how to deliver their content for you and is why you only get mobile versions of webpages on your phone and not on your laptop. So, many people got around this by spoofing the user agent with a browser plugin to make it look like your laptop was requesting the mobile version of websites (so T-Mobile would think that it's a phone requesting the data, not a tethered laptop.) However this solution only works for that specific browser. Other browsers, applications, and devices that do not support User-Agent spoofing were left without a solution. Was I really the only one trying to tether my PS3 for Netflix and gaming?
So some people turned to VPNs which basically act as a secure proxy so that T-Mobile could not read the traffic and tell what the User-Agent was. But this often costs money and/or slows down your network speed. Seeing as how people who are looking for a tether workaround are trying to not spend money, and are trying to use T-Mobile's lightning fast LTE, this isn't really a practical solution.
So after spending hours and hours looking for a solution, I came to the conclusion that there was none yet.
I deduced that the obvious solution would be to modify the packets on the fly and change the user-agent string of every HTTP request as it came to the phone before forwarding it on to T-Mobile. Luckily for us, all HTTP requests that have no User-Agent string or a string of "null/null" etc. are automatically accepted! So all that needed to be done was to strip the user-agent string of all of the outgoing HTTP requests - on the fly.
My first thought was that hopefully there was an android app that could do this.
There isn't.
And I am not capable of making one but if you find one or can make one, please tell me and I will adjust this explanation because that would make things a bit simpler. However, since we don't live in a perfect world, we have to run a program on a computer and route all traffic through that program. This wonderful little program that I came across called "Fiddler" (it won't let me post the link but it's www[dot]fiddler2[dot]com) is just what we need. It's a completely free program.
Go download and install fiddler. This program will allow us to monitor and 'fiddle' with the network traffic on the fly!
First, fire up your tethering app on your phone and connect your computer. I personally use android WiFi tether but I suppose it probably doesn't matter which one you use. Once you've connected your computer. Open up fiddler, go to "Rules," "User-Agents," and select "Custom..." A window will pop up. Leave this blank and click okay. Now, all of the network traffic from that computer with have its user-agent string modified to "User-Agent:[blank]" Test this out on any browser on your computer and you should not be redirected to the upsell page.
Now for all of your other devices! I was particularly concerned with my PS3 but any device that supports proxy use will work. That's a hell of a lot more devices than the number that support UA spoofing haha. Go to "Connection Settings" on your PS3 and select "Manual"
Go through your setup as usual and connect to your phone's wifi hotspot. When you come to the page that says "Proxy Settings" select "Use"
For the IP address go back to your computer and look at Fiddler. In the top-right corner there is an image of two computers and it says "Online" next to it. Hover over that icon and it will have an IP address listed. This is the virtual proxy that Fiddler has set up for auxillary incoming traffic on the local network. Type that IP address into the PS3's proxy settings and use port 8888 (you may have to configure your computer firewall to allow incoming traffic on that address/port)
Also, in Fiddler go to the AutoResponder tab and check the box that says "Unmatched requests passthrough." This is so that HTTP requests that come in without a User-agent already defined will just be passed on. If this box is not checked you may get frequent 404 errors.
Finish up the connection settings on the PS3 and let it fly! You can watch the traffic on Fiddler in real time!
This is my first post on XDA and this workaround is brand new as far as I can tell so there may be some kinks that need to be worked out.
Let me know if you have any questions or problems!
Respectfully,
Hunter.
Click to expand...
Click to collapse
Doesn't work on ps3...obtaining ip address succeeds but internet connection fails..i added the ip and port 8888 to the fire wall and allowed connection. and when i hover over the two computers it shows two ip addresses i have tried both and same results
metro pcs upsell, lg optimus f3/JB 4.1.2
I'm on the Metro PCS network, i used to have the lg motion and that phone would hotspot my ps3 with no problems. I figured that I would upgrade my phone to the lg optimus F3 and keep hotspoting on the $60 unlimited plan. Much to my surprise I have ran into the same issue many have others have ran into, the tmobile upsell page. mine now says metro pcs upsell. so I have tried many Apps in the store with no possible way around the upsell page. After hours and days of research, its apperhant that tmobile and metro pcs are not restricting the tethering function. I can obtain an ip address but not gain internet access. As have many others. I've rooted my phone using motochopper, i installed titanium backup pro, and rom toolbox pro. I backed up all my apk's to the external and went root browsing for anything that has to do with wifi, hotspot or tether. I wasnt getting anywhere untill today. My LG Optimus F3 runs on JB 4.1.2, instead of finding tethering features i found the open source codes on sharing data and http rules. I dont have much experience with altering codes, but i do know this would be a great starting point for bypassing the upsell reroute. By using romtools pro, i finally found myself using the app manager, from there i clicked on the file networking apk, i scrolled the app display to the right to get to romtools special features, clicked on explore apk. Every rule was laid out in plain text using a notepad. Javax/servlets/resources. Every file in this folder can be read with notepad. There is tons of info regarding internet sharing, web browsing, and what runs and triggers the infamous upsell codes. I've read a few post where developers are trying to find the source of upsell, i hope this helps as a starting point. (Besides that) i was also able to enter the lg hidden menu and uninstall all metro pcs apps with one click
"(Besides that) i was also able to enter the lg hidden menu and uninstall all metro pcs apps with one click""" ????
i am in exact same boat , metropcs , rooted with all tricks tried , and still upsell page .
one interesting thing though is my lg motion can use the F3 wifi for ip camera apps . tried other apps but no go .
"IP camera viewer" has no issues accessing internet by way of a wifi tether on the F3 using my non active LG motion , strange .......the other apps report network errors or just fail to start ( netflix ) perhaps this will help in hunting a bypass on the UPsell crap
Thanks but...
Thanks for providing the most current news about this problem with Tmobile, I have been using HMA / foxfi since Aug 2013. Just a few hours ago it stopped working, couldn't even login to VPN. I lost my useragent switcher when I upgraded Chrome, and couldn't fall back on that either, so thanks for the tip about fiddler.
I am currently online because I caved to the upsell. So my question is, has Tmobile "improved" security on its upsell to the point that VPN's and UA spoofs dont work anymore, and do I have to learn the answer to this by community or by blowing my data limit again? Does anyone have a fresh strategy, or know what's going on in Tmobile business? Do they even care about people like us?
I live by this connection, since other ISP's around here are not worthwhile, and I maintain mobile business with my laptop, and I would prefer to process GB's without having to scavenge for someone else's wifi.
petedude2lu3 said:
Thanks for providing the most current news about this problem with Tmobile, I have been using HMA / foxfi since Aug 2013. Just a few hours ago it stopped working, couldn't even login to VPN. I lost my useragent switcher when I upgraded Chrome, and couldn't fall back on that either, so thanks for the tip about fiddler.
I am currently online because I caved to the upsell. So my question is, has Tmobile "improved" security on its upsell to the point that VPN's and UA spoofs dont work anymore, and do I have to learn the answer to this by community or by blowing my data limit again? Does anyone have a fresh strategy, or know what's going on in Tmobile business? Do they even care about people like us?
I live by this connection, since other ISP's around here are not worthwhile, and I maintain mobile business with my laptop, and I would prefer to process GB's without having to scavenge for someone else's wifi.
Click to expand...
Click to collapse
VPN's no longer work for me either. I'm not getting the upsell page just no internet access at all while tethering.
Thanks TexasState, this was very valuable information that got me completely through T-Mobile's "walled garden" on their unlimited high-speed plan (for phones only) in an area where we don't have any good land-line options. :good:
What are some proactive approaches to making sure T-Mobile doesn't block my line? I'm using a phone basically as a makeshift wifi-router and all our computers run Fiddler. Is there anything else that T-Mobile might do to sniff out cheaters in the future? Is user-agent the only thing they can look at to determine if you're cheating?
Greetings first post here on XDA I have been able to tether via usb on metro/tmobile in OKC ,I am on a rooted F3 (LGMS659) I have tried just about everything a little luck with open garden but too slow for me ,downloaded foxfi wifi ap point no go ,redirected to upsell , tried usb with level one settings ,it works . but I may have done something when I entered the hidden menu 3548#*659# in settings those last two are interesting to me Upsell Url and ATS Start Property On
Took me about 8-10 hours to figure it out but i did it so heres how you get your tether back.
1.Open up your hidden menu.
2.Open Wlan test.
3. Click on UpSell and turn it off.
And turn on your tether app and have fun.
JUN10R831 said:
Took me about 8-10 hours to figure it out but i did it so heres how you get your tether back.
1.Open up your hidden menu.
2.Open Wlan test.
3. Click on UpSell and turn it off.
And turn on your tether app and have fun.
Click to expand...
Click to collapse
After half a day on the unlimited plan with Tea Mobile, this seems to have worked for me. Had to reinstall hiddenmenu.apk on my LG phone because I removed it earlier as bloatware but even after a reinstall as a user (as opposed to system) app, it worked.
Procedure was slightly different due to different model of phone/hidden menu but same basic procedure. BTW, it's unlimited but with 2.5 gb cap for hotspot. Let's just say I'm over the cap.
EDIT: So I got to almost 6 gb in one day, but then I got the redirect of death. I will troubleshoot when I have time later.
dbozam said:
After half a day on the unlimited plan with Tea Mobile, this seems to have worked for me. Had to reinstall hiddenmenu.apk on my LG phone because I removed it earlier as bloatware but even after a reinstall as a user (as opposed to system) app, it worked.
Procedure was slightly different due to different model of phone/hidden menu but same basic procedure. BTW, it's unlimited but with 2.5 gb cap for hotspot. Let's just say I'm over the cap.
Click to expand...
Click to collapse
What model did you use? Mine was in the Hidden Menu --> Settings menu.. and i chose "Upsell Try Off" with no avail.
LG G2 for Tmobile.
S4 "Hidden" Menu
I'm having the same issues as presented above but I'm unable to get into the "hidden" menu using the key code mentioned. I'm running Wicked V10 (it's great). Would love to test this out if I could access the right menu. So far I've gotten into the service menu but that's it.
This is by far the best work around I have found. Everything works. And if you are clever you can edit your user agent rules so they are automatic. Then turn fiddler into a windows service so ya never have to see it again and it just works. Excellent tutorial. The only thing I wish I could do is figure out how to get my Xbox 360 to connect to fiddlers proxy. If anyone knows please post it.
Thanks again OP
-Polluti0n
Sent from my SAMSUNG-SGH-T879 using XDA Premium 4 mobile app
Blank UA causes 403s and ASP issues.
This method works fantastic overall. I have my phone tethered to a router and run fiddler on all needed devices - no upsell message thus far (40GB+ down)
The issue I've run into is that some websites user the User Agent string to serve different content - by using a blank UA many ASP.net websites fail (on _doPostBack, in particular) and several give 403 errors (docs.WooThemes com) so I switched to a mobile UA but then sites serve mobile versions of their content (Amazon com). The next option is a desktop UA, but then I may as well not even switch it at ll?
I'm wondering - does anyone know what specifically T-Mobile looks for in the UA field, or know of a valid UA string that avoids detection but doesn't register as mobile (or give 403's)?
brn2drv99 said:
This method works fantastic overall. I have my phone tethered to a router and run fiddler on all needed devices - no upsell message thus far (40GB+ down)
The issue I've run into is that some websites user the User Agent string to serve different content - by using a blank UA many ASP.net websites fail (on _doPostBack, in particular) and several give 403 errors (docs.WooThemes com) so I switched to a mobile UA but then sites serve mobile versions of their content (Amazon com). The next option is a desktop UA, but then I may as well not even switch it at ll?
I'm wondering - does anyone know what specifically T-Mobile looks for in the UA field, or know of a valid UA string that avoids detection but doesn't register as mobile (or give 403's)?
Click to expand...
Click to collapse
Googlebot and safari 5 for windows work great and are undetected by T-Mobile.
Sent from my SAMSUNG-SGH-T879 using XDA Premium 4 mobile app
Polluti0n said:
Googlebot and safari 5 for windows work great and are undetected by T-Mobile.
Click to expand...
Click to collapse
Seems to work perfectly. Thanks!
For anyone needing it, here's a bare-bones CustomRules js file for Fiddler.
Code:
import System;
import Fiddler;
class Handlers
{
static function OnBeforeRequest(oSession: Session) {
// User-Agent Overrides
oSession.oRequest["User-Agent"] = "Mozilla/5.0 (compatible; Googlebot/2.1; +tp://w.google.com/bot.html)";
// Add 'ht' after the + and make it 3 'w's instead of just one
}
}
I can use internet on desktop but not in Metro apps so I got the solution in the form of fiddler. What's the issue actually that I have to use fiddler to bypass my traffic ? Is there any permanent solution except it ? Which update caused the issue ??
Sounds like your Internet connection requires a proxy. Most (though by no means all) desktop apps will automatically use proxy settings, but Metro apps don't. The steps needed to make Metro apps go through Fiddler *should* also work for making it go through whatever proxy your Internet connection is using, assuming that's actually the problem.
If that's not the problem, then I have no idea what's going on. What version of Windows are you running? Are you on a local network or directly connected to the Internet? How long ago did this problem start, and did you do anything to/with your Internet connection around that time?
I use latest Windows 8.1 update 2. It was started way back in June-July after I installed some Windows Updates. I couldn't open any site through my browsers, I noticed that some proxy settings were already put automatically after installing updates. I haven't touched anything. I removed those settings and made it back to normal and I could access internet but boom...not a single metro app worked, this happened to my colleague's lappy,too. Right now without adding proxy, desktop apps work very fine, I mean even if I select option of no proxy but no metro app can access internet.
Should I try to uninstall those updates ??
Hello,
I was wondering if anyone knew of a mod (in any form/fashion) that will "revert" the certificate changes that were introduced in Android 7.0, or if this would be a possibility?
The story in the beta's was/is:
To use my Wi-Fi at my school (I literally live at school) I have to install a certificate on all devices. In Marshmallow I just enter my credentials when connecting to the Wi-Fi, and it connects, however there is no internet connection yet, I then have to open the browser and visit cert.localnetwork.zone, and install the certificate which then allows me access to the internet (well, 'restricted' access, hence the purpose of the certificate).
However, in N, there are some extra steps, when I [connect to the Wi-Fi I have to select between use system certificates and do not validate, which I then select "do not validate", as I don't have any certificates installed on the device to use, and I don't know the domain to enter for the other, and it kicks up an error if I enter cert.localnetwork.zone (the only thing I could think to use). Then when I go to Chrome just like any other time I go to cert.localnetwork.zone, and download and install the certificate like any other ROM I would do it on. It installs and grants me access to the internet, however the access is 'different'.
I can't use the Google App, which means that Google Now doesn't work at all, neither does the search bar on the GNL, going to Chrome I can't search something in the URL bar, instead I have to go to bing.com, and then search it from there (google.com returns an error). I open Sync for Reddit (Pro), and it will not load returning that I have no internet connection, however upon using the official Reddit app, everything works fine. Using the Bing app results in the same error as the Google App (no internet connection), however when using the bing website as mentioned before it works fine. Other services like Google Plus do not work either.
But I am still able to access the Play Store, Gmail, Inbox, Twitter, Tumblr and other services just as I would before, but it seems that anything using https, does not work due to an added security measure. However, when switching to another Wi-Fi network, or using my data, everything returns and works as per usual (which is quite annoying, when a heap of Google Now, Reddit etc notifications come streaming in). Every version of the N preview has been like this, however any version of 6.x has no problem. I haven't come across this error on any other devices (OnePlus One, Nexus 5, iPhone 6, Macbook Pro, Dell XPS 13, Chromebook Pixel, Nexus 7). I've basically narrowed it down to the connection not being private, as it says when I press "do not validate", however I don't know of any other way to connect to the Wi-Fi..
However, in the official 7.0 release it's even worse, now I connect to the Wi-Fi, and I can ONLY access the Play Store (which works without the certificate being installed anyway). I contacted our IT department, and they said that this is not something that they can change since they are required by the ADoE to monitor internet activity.
So I was wondering if there was some either mod/rom or ANYTHING that would allow me to revert the certificate changes in 7.0, or a root app or whatever that allowed connections on an "insecure" Wi-Fi network.