HAPPY NEW YEAR TO ALL!!!
THIS Build has CIFFS, PPTP, VPN, MPPE, PPOE, Proxy Support, EXT4 Support, NTFS Support, Joystick/GamePad support. 3g Modem is also enabled in this kernel
The kernel will now work with Zpad ROM, TNT ROM and VEGAN ROM. WIFI fix is now included with the kernel
Thanks rothnic for guiding me with CIFFS
Thanks to pershoot and other devs..
Sleep fix and HDMI has integrated CIFFS, PPTP, VPN, MPPE, PPOE, Proxy, EXT4, NTFS, Joystick/Gamepad etc....SD-ext is fixed
------------------------------------------------------------------
UPDATE:
New kernel up with ThumbEE support, update to 10.9.9 and few minor tweaks in kernel. Please test, only for FROYO at the moment Also, please clear Dalvik-cache after installing kernel.
Kernel now dated to determine the latest (3/20/11). Latest kernel has all with more permanent sleepfix, thumbee, watchdog...etc..
Froyo version 5 kernel and Gingerbread beta 2 (Vegan gingerbread) up.
Version 6 up
Version 7 is up. I RECOMMEND YOU STAY IN VERSION 6 if it is stable. I have no Gtab to test version 7 but it works with my testers. In my opinion, version 7 has better sleep support than 6 but according to a few testers, it's a bit slower.
Version 8 is up. Bluetooth bug is fixed. Workaround for sleep built in the kernel.
Version 9 is up with better Bluetooth support and better sleep fix
Update on Version 9:
Tested with an Ubuntu laptop bluetooth and was able to receive and send a 30mb file with a transfer rate of 60-80 kb/sec
-----------------------------------------------------
-----------------------------------------------------
UPDATE: VERSION 10 is up..There are three types with different voltages settings.
Clemsyn1.5Froyoextra - 750 mv - 1250 mv
Clemsyn1.5FoyoMed - 750mv - 1200 mv
Clemsyn1.5FroyUV - 700mv - 1175 mv
I myself prefer Clemsyn1.5FryoUV for battery life but it might not work for you tegra. Just try Med and if it still don't work, try extra.
Please don't forget to wipe the Dalvik-cache then wipe the cache partition after installing kernel. Thanks!
Gingerbread version is up!
Uploaded second version of Froyo 1.5ghz with better voltage support (I think )
UPDATE: 4/22/11
Updated Overclocking code using CPajuste's.
UPDATE: 4/25
Got PimpMyCPU working by working on his APK BTW, this is pretty good
\
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
UPDATE:
******** PIMPMYGTAB AND KERNEL ON SECOND POST **********************
PIMPMYGTAB VOLTAGE CONTROL and Clemsyn Kernel Version 11
This is my latest kernel with Updated Frequency table for 1.5 ghz to support PimpMyGtab.apk
Additions are Advance Net Config
Incorporated pershoot's latest wifi drivers...Thanks Pershoot
The voltages in each frequency are the max that I will release for 1.5 ghz. Please use PimpMyGtab to undervolt it as much as your Gtab could
1500000 - 1300mv
1200000 - 1200mv
1000000 - 1100mv
912000 - 1000mv
608000 - 900mv
4560000 - 825mv
2160000 - 750mv
Remember if UV used to work for you Underclock to 1175-1200 at 1500000
If Medium Used to workk for you Underclock to 1200-1250 at 1500000
If Max Used to work for you Underclock to 1250-1300 at 1500000
Note: If you make changes to the voltage, make sure you don't go over 100mv limit by Nvidia
Eg. 1200mv - 1300mv (100mv)
You can go less but not over (actually you can go over but lets just keep it within limits )
Here is the link for instruction on how to use PimpMyGtab
http://forum.xda-developers.com/showthread.php?t=1018411
** If you get a scaling_governor error when starting PimpmyGtab...You just have to set the scaling governor by typing echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor or by installing CPU Master and choosing Powersave in Governor
BTW, if you like my work, please dont hesitate to buy me a BEER
Also if you like PimpMyGtab...Make sure you purchase PimpMyCPU (This is the source) by CPasjuste. BIG THANKS TO Cpasjuste.
-----------------------------------------------------------
-----------------------------------------------------------
UPDATE 4/27/11
System/AVP no Oc'd to 266400
GPU now overclocked to 425000
1.5ver11avpsystemOCFROYO(Gingeer).zip
When installing a new kernel, make sure you uninstall PimpMyCPU the reinstall to allow it to read the current kernel settings
If you like my work, pls buy me a beer or maybe a whiskey
5/1/11
Due to PM requests...I'm releasing 1.6 and 1.7 kernel..Please be advised that voltage settings and speeds are above nvidia recommended settings.
IF you are using 1.6ghz and 1.7ghz with my combo or Calkulin's ROM...you need to edit /system/etc/init.d/01cpufreq_screenstate_scaling to use 1700000 or 1600000 speed. All these kernels are compatible with PimpMyGtab. Make sure you uninstall PimpMyGtab and install the kernel, then reinstall PimpMyGtab and tweak it accordingly, also make sure you save the current settings as boot.
Thanks, could you help provide a change log?
From v10.9.2 kernel
$uname -a
Linux localhost 2.6.32.9-dirty #10 SMP PREEMPT Sat Jan 1 14:30:07 CST 2011 armv7l GNU/Linux
Getting 2200-2400 Quadrant scores on 10.9.2. So far no issues. Had to reinstall Flash.
lamlam01 said:
Thanks, could you help provide a change log?
Click to expand...
Click to collapse
here is the change log up to 10.9.2
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/tags/tegra-10.9.2
IPv6 is not included coz it breaks our wifi (needs a ROM with new modules to make it compatible with the kernel)
tegra bluetooth sleep not added (coz I dont use it)
HDMI not added (dont use it to)
Viewsonic's kernel was only up 10.8.2 so I put the changes to bump us up to 10.9.2. Working on 10.9.3. Once I get 10.9.3 running, I will release it for Vegan and TNT.
Working on 10.9.3 right now. Halfway through porting the fixes and working around the bugs, I have to say it is much snappier now. Will release 10.9.3 soon.
clemsyn said:
Working on 10.9.3 right now. Halfway through porting the fixes and working around the bugs, I have to say it is much snappier now. Will release 10.9.3 soon.
Click to expand...
Click to collapse
I've always treated kernel like a black box... My hat's off to you dark wizards who play there.
I'm running Vegan ß5.1, and just tried your 9.1 and 9.2 kernels. They both feel good so far, but I'm unable to connect with my file server running CIFS. Have you included CIFS/SMB support?
also, is there a magic way to turn on the external USB port for more things? I have a holux GPS mouse and would love to use it but can't find even rudimentary serial comms for our big beautiful USB. That's the last hardware hurdle I have (except the screen) to making the gtablet truly useful in my car.
Best, Bittrix.
clemsyn said:
Working on 10.9.3 right now. Halfway through porting the fixes and working around the bugs, I have to say it is much snappier now. Will release 10.9.3 soon.
Click to expand...
Click to collapse
Thanks for the hardwork! Will these kernels apply to the latest TNTLite (3.1.4) and Vegan (Beta5) releases?
bittrix said:
I've always treated kernel like a black box... My hat's off to you dark wizards who play there.
I'm running Vegan ß5.1, and just tried your 9.1 and 9.2 kernels. They both feel good so far, but I'm unable to connect with my file server running CIFS. Have you included CIFS/SMB support?
also, is there a magic way to turn on the external USB port for more things? I have a holux GPS mouse and would love to use it but can't find even rudimentary serial comms for our big beautiful USB. That's the last hardware hurdle I have (except the screen) to making the gtablet truly useful in my car.
Best, Bittrix.
Click to expand...
Click to collapse
CIFS/SMB support is not yet enabled. Would like to try to finish this 10.9.3 or maybe up to 10.9.7. Regarding the external USB port, I will have to look into that.
Building 10.9.3 at the moment and will call it quits after this. Kids will start waking up soon
samepic said:
Thanks for the hardwork! Will these kernels apply to the latest TNTLite (3.1.4) and Vegan (Beta5) releases?
Click to expand...
Click to collapse
Only Vegan at the moment. When I get 10.9.3 going, I'll make one for TNT (that is if the kids are still napping)
Update:
Just encountered another bug..Will have to figure out what's causing this before I can continue If I can get over this bug, I think we can jump to 10.9.7.
Update:
OK got it! Will post 10.9.3 and make one for TNT
UPDATE 10.9.3 is up...
Great work! Any chance the tunneling protocol is included in these newer kernels? I would love to be able to use VPN from the GTablet.
bittrix said:
I've always treated kernel like a black box... My hat's off to you dark wizards who play there.
I'm running Vegan ß5.1, and just tried your 9.1 and 9.2 kernels. They both feel good so far, but I'm unable to connect with my file server running CIFS. Have you included CIFS/SMB support?
also, is there a magic way to turn on the external USB port for more things? I have a holux GPS mouse and would love to use it but can't find even rudimentary serial comms for our big beautiful USB. That's the last hardware hurdle I have (except the screen) to making the gtablet truly useful in my car.
Best, Bittrix.
Click to expand...
Click to collapse
I have compiled a kernel that enabled serial USB for you with 10.9.3. PM me on what build you are currently using.
clemsyn said:
I have compiled a kernel that enabled serial USB for you with 10.9.3. PM me on what build you are currently using.
Click to expand...
Click to collapse
Unbelievably cool! Thank you. I appreciate it. PM sent.
Glad you are taking this on. I do think that CIFS support most people would want by default.
I'm trying your 10.9.3 versions both on my zpad build and it doesn't get past the boot.img bootscreen. I'm going to look more into it, the stock TnT boot.img booted fine with my system.img so not sure what it would be.
clemsyn said:
Only Vegan at the moment. When I get 10.9.3 going, I'll make one for TNT (that is if the kids are still napping)
Update:
Just encountered another bug..Will have to figure out what's causing this before I can continue If I can get over this bug, I think we can jump to 10.9.7.
Update:
OK got it! Will post 10.9.3 and make one for TNT
UPDATE 10.9.3 is up...
Click to expand...
Click to collapse
Thanks. Just installed it on my Gtab running Vegan Beta5. So far the following are working fine:
Bluetooth
WiFi using WPA PSK
WiFi using ad-hoc mode
External USB Connection to Flash Drive
Sound, SCARD2 work
Will let you know if I run into any issues.
Thanks!
rothnic said:
Glad you are taking this on. I do think that CIFS support most people would want by default.
I'm trying your 10.9.3 versions both on my zpad build and it doesn't get past the boot.img bootscreen. I'm going to look more into it, the stock TnT boot.img booted fine with my system.img so not sure what it would be.
Click to expand...
Click to collapse
After running/using beta vegan 5.1 with cifs support, itbis going to be very difficult to go back. I am sorry.
Sent from my PC36100 using XDA App
bittrix said:
Unbelievably cool! Thank you. I appreciate it. PM sent.
Click to expand...
Click to collapse
Try this and let me know how it goes
I assume its a CP210x family so I build a module for it.
rothnic said:
Glad you are taking this on. I do think that CIFS support most people would want by default.
I'm trying your 10.9.3 versions both on my zpad build and it doesn't get past the boot.img bootscreen. I'm going to look more into it, the stock TnT boot.img booted fine with my system.img so not sure what it would be.
Click to expand...
Click to collapse
Building CIFS support won't be an issue. I honestly don't use it so I am not familiar with it. I see options to enable CIFS and a few more options related to CIFS. If you can PM me on what options to enable to get it going I would greatly appreciate it.
clemsyn said:
Try this and let me know how it goes
I assume its a CP210x family so I build a module for it.
Click to expand...
Click to collapse
It's a GR213u... trying to connect now... (typing this using your holux 9.3 build)
bittrix said:
It's a GR213u... trying to connect now... (typing this using your holux 9.3 build)
Click to expand...
Click to collapse
Let me know how it goes
can the tnt version be used on stock 3389 with enhancement pack v3 applied?
thanks
Related
INTRODUCTION
This kernel is a developmental fork of the CM7/AOSP and Sense kernel tree built by Imoseyon (leankernel). With his permission, I have started working on an alternative kernel that offers some extra functionality.
The goal of this project is to add things to the kernel that aren't, well, necessarily lean. As development progresses, I intend to keep to the spirit of Imoseyon's work (by being careful not to make this too fat), and any major fixes or changes to code that occurs in his source tree will be ported to this kernel.
ALREADY COOKED IN BY IMOSEYON
Since most of you already know of Imoseyon's work (if you don't, see the link to his thread above), and what his kernel is about, I won't go over all the minutiae from his kernel's development, but I will highlight:
Linux Kernel v2.6.35.13 with back-ported code nearly identical to 2.6.39.
speedtweak.sh (on-the-fly frequency/voltage modification).
interactiveX, ondemandX, and smartass governors that are highly tweaked.
ramdisk enhancements (file system speed-up, init.d)
SENSE CHANGELOG - NEROZEHL'S ADDITIONS
version 2.9.0
Fix WiFi issues.
TinyRCU is now used.
Tweaks to minfree.
Filesystems mounted as ext4.
version 2.3.6
Bugfixes. No more boot issues!
version 2.3.2
Latest Charging code from Imoseyon.
Wireless charging seems to work
Another try at call recording...
version 2.3.0
Charging and over-clocking modifications ported from Imoseyon's kernel.
Call Recorder has been added. It is reported to be working for someone when receiving calls. I'm tracking the issue down, but the code is there. YMMV.
version 2.2.4
Latest charging and ramdisk tweaks from Imoseyon's 3.3.6
version 2.2.2
Bluetooth patched up! (thanks Imoseyon!)
version 2.2.1
After much anticipation, a new version!
Kernel base changed to Imoseyon's latest 3.x source (as of 6/22/11), including charging and camcorder fixes!
Call recording support coming in the next version!
Various kernel performance tweaks galore!
Slightly leaner than before.
version 2.0.3
Updated speedtweak.sh and customtweak.sh scripts to latest release. New features! Bugs Fixed.
Reversed charging tweak.
Minor smartass governor tweak.
version 2.0.2
Tiny tweak to charging code.
Added twistedumbrella's "speedtweak.sh" as default script for speedtweak.
Added twistedumbrella's "customtweak.sh" to allow for setting tweaks like whether or not to have logcat on, and more!
version 2.0.1
Added SWAP support (enable by typing, in shell, "swap create" and disable by typing, in shell, "swap remove"). This wouldn't have been possible without the help of twistedumbrella's MODs!
Added in some of Imoseyon's tweaks for performance. Thanks!
version 2.0.0
All the usual refinements from my AOSP kernel, except for Sense! This kernel source has been pulled from Imoseyon's latest work (DesireHD kernel)
Brain **** Scheduler (BFS) task scheduler
Budget Fair Queue (BFQ) and V(R) I/O schedulers
SLQB slab allocation
Enabled 184MHz CPU slot (disabled by default), enable using speedtweak.sh
TUN/TAP/FUSE/NFS/CIFS support
See changelog for AOSP for the rest.
AOSP CHANGELOG - NEROZEHL'S ADDITIONS
version 2.9.0
Ramdisk updates for CM7
Minfree Tweaks
Audio driver upgrade and tweaks.
TinyRCU
version 2.6.0
Aligned to latest source - forked repository from github and updated my end.
Latest ramdisk, and audio driver tweaks.
TinyRCU for better memory management.
version 2.5.0
This wasn't ever officially released. I posted it in a reply to this thread for testing. The changes:
Reverted workquue and BlueTooth -- keeping previous backports.
New Wifi driver and charging tweaks.
version 2.4.0
New workqueue, cpufreq, and cpuidle code from 3.0 RC!
InteractiveX adjustments to help with reboots.
Backported bluetooth code (also, from 3.0 RC!)
Hacked BFS to be compatible with recent changes.
Tweaked call-recording to fix some FC issues.
version 2.3.0
Alas, a new AOSP kernel to be had!
Latest Imoseyon patches (driver code updates)
Latest ramdisk updates applied.
Re-added Incall recording support, let me know how it works!
version 2.0.3
Audio, WiFi, etc. fixed with latest Imoseyon patches. Enjoy!
version 2.0.2
Fixed the issues with WiFi, camera, bluetooth, CPU frequencies, etc.
version 2.0.1
FINALLY! It's here!
New Kernel base (Ace kernel) -- latest pull from Imoseyon's sourcetree. That means all his tweaks up to 6/15/11.
All the usual refinements (BFS, BFQ/V(R) schedulers, SLQB, etc.) are added into this kernel.
Does not have sched.sh but it will soon (wanted to get this out to you quick!)
Work on CM7 RC0.6 -- Enjoy!
version 1.3.0
Enabled 184MHz CPU slot (disabled by default), enable using speedtweak.sh
Symlinked "speedtweak.sh" -> "st" and "sched.sh" -> "sk"
Tweaked ramdisk a bit more.
version 1.2.6
Updated init files to align with slayher's settings.
Increased blue-tooth audio volume (slayher)
Set default boot CPU frequency to 1024MHz to address issues some folks were having with battery temperature.
version 1.2.4
Wifi/MMS/Settings fixed thanks to beavis9k. (init buffer sizes changed)
Minor code cleanups/optimizations.
version 1.2.2
Changed task scheduler to the latest version of Con Kolivas' Brain **** Scheduler (BFS). Should improve performance.
Added Fabio Checconi's latest Budget Fair Queue (BFQ) I/O scheduler and set it as default.
Added "sched.sh" script that will allow you to choose your I/O scheduler and set as default for each boot (Re-purposed from Imoseyon's "speedtweak.sh").
Pulled numerous tweaks from CyanogenMod's source tree.
Enabled 802.11n
version 1.1.8
Increase GPU memory allocation.
Minor speed tweaks.
version 1.1.7
Added SLQB slab allocation (ported from Adrynalyne's source, modified to work on kernel v2.6.35.13)
Added support for FUSE (Userland filesystems, can be used to create encrypted filesystems and other neat things.)
version 1.1.3
Ported new GPU code from Imoseyon.
Tweaked charging.
Added call recording support.
/data, /system, /cache are now EXT4 (and tweaked).
version 1.0.2
New I/O Scheduler (Aaron Carroll's V/R I/O Scheduler) has been added and is now the default scheduler.
Read-ahead buffer has been further increased for performance.
Death-Ray support was ported from Adrynalyne's CF kernel.
NFS (Network Filesystem) and CIFS (Common Internet File System, SAMBA replacement) support has been added.
Tunneling and TUN/TAP support have been added (required by OpenVPN)
System V IPC (SYSVIPC) has been re-enabled to address issues with broken dependencies in CM7.
WARNING
As a general disclaimer, I do not accept responsibility for what may result from you flashing something I post. While I take every precaution and thoroughly test before I release, I cannot be to blame for catastrophic failure.
DIRECTIONS
Flash in Recovery (Do NOT flash in Kernel Manager or ROM Manager).
DOWNLOAD
SENSE KERNELS
http://www.nerozehl.net/dreamkernel_sense_2_9_0.zip - MD5: cd5a03acc495c5c0def7c00b14d3d535
http://www.nerozehl.net/dreamkernel_sense_2_3_6.zip - MD5: 15985306c69cf659c96abc085b9fa3a2
AOSP/CM7 KERNELS
http://www.nerozehl.net/dreamkernel_aosp_2_9_0.zip - MD5: 785410364278d72d7059d92f1a83453b
http://www.nerozehl.net/dreamkernel_aosp_2_6_0.zip - MD5: cc2d0eda4edd3004cbe2797cb80b4dea
GEE PEE ELL (GPL) AND USAGE
My source-tree can be found here. I have permission from Imoseyon to use his source for this kernel. In turn, I've given permission for folks to use my kernel in their ROMs as well. Consequently, if you use this kernel in your ROM, please credit both Imoseyon and myself for the work, and--while not required--a heads up if you're using it in a ROM would be appreciated. If you intend to use my source-tree for your own kernel, then you must get permission from both Imoseyon and myself.
ADDITIONAL
I sincerely hope you find this kernel to your liking. If you find any bugs, or if you have questions or concerns, please feel free to let me know. Likewise, if there is a feature you would like to see added to this kernel, I will be happy to look into it.
KNOWN ISSUES
SENSE
Speedtweak is under re-construction. Bear with us!
AOSP
None reported yet, please let me know.
Tempting
Sent from my ThunderBolt using XDA App
Just saw in the CM thread that this works work the latest build so I'm giving it a go.
awesome! nerozehl, wanna add in-call reporting support? That way I don't have to build SP anymore and I can just link it here from my thread.
don't bother using it...wifi does not work at all. It attempts to connect then disconnects. Just went back to the stock slayher kernal instead.
DipRip said:
don't bother using it...wifi does not work at all. It attempts to connect then disconnects. Just went back to the stock slayher kernal instead.
Click to expand...
Click to collapse
I dont think you should really be telling people what to try. unless it breaks it permanently, then let people flash whatever they want. he never stated it fixes everything in CM7 or that it was the god of all kernels. just something new. I can see posting a warning telling people that it doesnt work, but not just telling em to not even bother using it.
just my 2 cents though.
Imoseyon said:
awesome! nerozehl, wanna add in-call reporting support? That way I don't have to build SP anymore and I can just link it here from my thread.
Click to expand...
Click to collapse
Yep! Working on that right now!
Heh I meant to type recording not reporting.
sent from my phone running leanKernel + gingerjane
Works for me? Actually it seems pretty good
DipRip said:
don't bother using it...wifi does not work at all. It attempts to connect then disconnects. Just went back to the stock slayher kernal instead.
Click to expand...
Click to collapse
DipRip said:
don't bother using it...wifi does not work at all. It attempts to connect then disconnects. Just went back to the stock slayher kernal instead.
Click to expand...
Click to collapse
I have $20 that says you flashed it with ROM Manager. Lol.
Sent from my ADR6400L using XDA App
Ok! I have 1.1.3 coming out this evening (thanks to my friends who have been test dummies!). Will support call recording and have the GPU patches and tweaks from Imoseyon and some EXT4 tweaks courtesy of yours truly. Stay tuned
Just great now I to threads to keep an eye on, JK. Thanks though I've always sworn by Imoseyon's kernels and I'm really looking forward to your 1.1.3 release.
1.1.3 Released! Enjoy.
nerozehl said:
This kernel is not a Sense kernel (coming soon!)
Click to expand...
Click to collapse
Is the Sense kernel going to be Froyo or GB? (BTW, very happy that you have a featureful version of LeanKernel - great idea to free Imo up some on the lower-level stuff!)
Jaxidian said:
Is the Sense kernel going to be Froyo or GB? (BTW, very happy that you have a featureful version of LeanKernel - great idea to free Imo up some on the lower-level stuff!)
Click to expand...
Click to collapse
Most likely GB, because the Froyo kernel playing field is pretty well saturated with great kernels.
WPA2 does not work with wifi, thats what the "wifi is broken trollololololol" guy ment
tho i wish SOMEONE could fix this, i have yet to find a kernel that doesn't have some wpa2 issues. *hint hint, please?*
DroidTh3ory said:
I have $20 that says you flashed it with ROM Manager. Lol.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
How do you want to send me the 20? I hate rom manager. Of course everything performs differently for different people, but for me it was a total failure compared to other kernels.
Sent from my ADR6400L using Tapatalk
DipRip said:
How do you want to send me the 20? I hate rom manager. Of course everything performs differently for different people, but for me it was a total failure compared to other kernels.
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
Ooooh, somebody just made twenty bucks! ;-)
WPA2 is currently at the top of my list.
Minimalist 3.2.1 ROM.
Built on custom modified Tiamat Xoom 2.1 ROM and HoneyVillain 2.5 kernel. No screenshots available. Just imagine or look up what the Xoom's UI looks like.
Download the ROM here.
Instead of doing a mega-patch, I've just decided to upload the numerous enhancements and fixes as an entire new ROM.
Kernel sources will be available here - https://github.com/anarchron/Iconia_a500_3.1
Thank you for posting a new rom, though a more detailed guide of what is included/not and some screen shots would be excellent. Thank you.
What is this based on? Stock Asus?
EDIT: But also, thankyou for putting in the effort!
Just wondering, since you didn't mention it in detail in the first post.
Did you include honeyvillain 2.5 kernel?
Stock Xoom 3.2 with modified HoneyVillain kernel.
any chance of some screen shots?
also, what apps are included/excluded?
thank you.
ROM is working very well here, thank you for the effort you've put in.
I decided to be a bit cheeky and see if it would work upgrading from HoneyVillain (3.1 Acer base) without a data wipe, and it worked fine. If I come across any issues though I'll be sure to wipe before complaining.
Downloading......seems very interesting specially the fix of the portrait mode....
Thanks
Enviado desde mi A500 usando XDA Premium App
First feedback - will it work with Richardtrip's stock 2.5 kernel without your modifications? And if not - could you enable overclocking in your kernel? You've got it set to a maximum of 1ghz it seems.
What about 3g support ?
Sent from my A500 using Tapatalk
how is the audio laud in this rom..? i like the acer one for the good audio...
thanx
themono said:
First feedback - will it work with Richardtrip's stock 2.5 kernel without your modifications? And if not - could you enable overclocking in your kernel? You've got it set to a maximum of 1ghz it seems.
Click to expand...
Click to collapse
It won't work on the stock kernel. I made a mistake earlier and left out the over clocking function. I'm currently rebuilding the kernel and preparing a patch to enable overclocking.
To fully comply with GPL stuff, I will be forking the HoneyVillain kernel source sometime later this week. I have yet to figure out the subtleties of github.
themono said:
First feedback - will it work with Richardtrip's stock 2.5 kernel without your modifications? And if not - could you enable overclocking in your kernel? You've got it set to a maximum of 1ghz it seems.
Click to expand...
Click to collapse
Patch for that is now available.
Backing up now.
Gonna take a look.
My thanks button don't work anymore
But thanks
Can someone test 3G dongle and report back ??
anstelios said:
Can someone test 3G dongle and report back ??
Click to expand...
Click to collapse
This is WiFi-only.
does rotation switch work?
@dr1337
just flashed ... seems to be most stable 3.2 for now ...
will try some apps and stuff to see if it will be still stable
well ...
i have one request: can u offer a patch to bring back german language?
Google Account Sign-In
I keep getting a 'Google Account sign-in failure' when I try to set up my gmail account. I've performed a full wipe and initially I flashed the rom and then I immediately flashed the oc patch. On the second attempt I wiped again and just installed the rom and both times I get the same error. Any help would be great!
Disregard that last message, it seems to be working now. Odd...
-------- 29/08/2011 --------
UPDATE:
update.zip (19.61 MB)
update.zip (mediafire.com link)
Changelog:
- ext4 support bugfix
- BLN support
- Only use busybox in /sbin. Now, no one can break CF-Root's busybox.
- Fix some script in /system/bin reported does not work with CF-Root (am, bmgr, ime, input, monkey, pm, and svc).
With deodexed /system/app and /system/framework, USB and WiFi tethering failed to start. Restoring back /system backup, resolve the problem
Is a wise choice to make a nandroid backup before doing filesystem conversion using ext4 Manager.
-------- 26/08/2011 --------
UPDATE:
update.zip (19.94 MB)
Have a critical bug in init.rc, do not use this for ext2/3/4 fs.
Big thanks to ilarrain and koush! Using ilarrain's patch for pm2.c, now I can use my own compiled kernel for CWM4 without recovery boot loop
Changelog:
- CWM v4.0.0.9, ext4 support
- Auto install CF-Root after update, no need to delete /system/cfroot manually
Zeam Home Screen
Firmware Version
CPU Spy Info
-------- 24/08/2011 --------
UPDATE:
update.zip (12.57 MB)
Changelog:
- Using the latest smartass, interactive, and interactiveX source from erasmux
- Fix bug with cpufreq stats, now the CPU Spy can display the CPU Time In State. Possible problems associated with SOD because CPU frequency is too low. May be Sleep Of Death starting from Sleep tO Deep
NOTE:
Remove cfroot directory in /system to force reinstall CF-Root!
-------- 23/08/2011 --------
I am planning to upgrade to official Indonesia Gingerbread (2.3.4 DXKP9), so I have to flash my device to Froyo. But before go to Samsung Service Center, I tried the implementation of CF-Root in Froyo and here's the result:
update.zip (12.46 MB)
Flash it using Galaxy Ace standard recovery.
It has been tested on Froyo DXKC1 and may not be problematic in other Froyo. Everything at your own risk!
Almost same as CF-Root for Gingerbread, except:
- No tiny RCU implementation
- Have smartass and interactive CPU governer, thanks to psyke83 from http://www.madteam.co/
- Default have 32MB zram swap, thanks to psyke83
- Android Scribble 2.0 boot animation from here, thanks to GLa'DOS
- No BLN support
- The CWM part no ready yet
To enabling smartass governer:
Code:
propset persist.tweak.gov_smartass enabled
To disabling smartass governer and back to ondemand governer:
Code:
propset persist.tweak.gov_smartass disabled
Reserved for future update?
one thing caught my interest, since when u implement smartass cpu governor? any chance of it getting to cfroot for kpn/kph? as always, good job
does it support EXT4 ?
I just jizzed to this topic. 2.2 is actually much faster and lightweight compared to 2.3 and with cfroot I might give up custom roms for 2.3 for a while...
an0nym0us_ said:
one thing caught my interest, since when u implement smartass cpu governor? any chance of it getting to cfroot for kpn/kph? as always, good job
Click to expand...
Click to collapse
Of course yes.
izador said:
does it support EXT4 ?
Click to expand...
Click to collapse
Yes, but the CWM part not ready yet. Do not use ext4 Manager to convert your fs until the CWM part ready.
consegregate said:
I just jizzed to this topic. 2.2 is actually much faster and lightweight compared to 2.3 and with cfroot I might give up custom roms for 2.3 for a while...
Click to expand...
Click to collapse
I am thinking about dual booting.
Dual booting..wow..as always you come with new and fantastic ideas.
Without reflashing again and again we can have two ROMs.
I wish I could multiboot between different custom ROMs!
ketut.kumajaya said:
Of course yes.
Yes, but the CWM part not ready yet. Do not use ext4 Manager to convert your fs until the CWM part ready.
I am thinking about dual booting.
Click to expand...
Click to collapse
Will take a lot of work! I'm no developer but I sure know that.
Though cwm must first work with froyo.
Huge thanks to you, ketut.kumajaya.. You made it again!! I'm planning to make a froyo ROM, but I can't find CF-Root for froyo.. And now you made it!
ketut.kumajaya said:
I am thinking about dual booting.
Click to expand...
Click to collapse
Would be mostly appreciated (!!!!!!!!!!!!!!!!!!!!! x99)
ketut.kumajaya said:
Of course yes.
Yes, but the CWM part not ready yet. Do not use ext4 Manager to convert your fs until the CWM part ready.
I am thinking about dual booting.
Click to expand...
Click to collapse
coollll, 10x
there is CWM, maybe it can fit ?
http://forum.xda-developers.com/showpost.php?p=15639530&postcount=1
*boot animation didnt work for me.
tried to changed build.prop but still no boot animation.
*wifi dont turn on .... get error when trying to enable it
OK found the problem used DKC1
Wow.. Just flashed to Froyo to get my GB update.. Much appreciated for CF-Root adaptation.. This make it Ultimate Froyo (coincidentally a nice ROM name XD) before getting my official GB upgrade..
fla.sh said:
Huge thanks to you, ketut.kumajaya.. You made it again!! I'm planning to make a froyo ROM, but I can't find CF-Root for froyo.. And now you made it!
Click to expand...
Click to collapse
Actually I want to bring CF-Root to my wife's Galaxy 5 using psyke83's Galaxy 5 kernel for CyanogenMod.
fla.sh said:
Huge thanks to you, ketut.kumajaya.. You made it again!! I'm planning to make a froyo ROM, but I can't find CF-Root for froyo.. And now you made it!
Click to expand...
Click to collapse
WOW o.o a Froyo ROM ?!!
Post #1 updated.
ketut.kumajaya said:
I am planning to upgrade to official Indonesia Gingerbread (2.3.4 DXKP9), so I have to flash my device to Froyo.
Click to expand...
Click to collapse
hopefully you're going to dump/backup your rom and upload it.
gonna wait patiently for that rom backup
i've tried the biggest SSC in my area, no ginger upgrade yet
i cant change CPU PROFILE & SPEED in SETCPU ??
m using kc1
rockzanei said:
i cant change CPU PROFILE & SPEED in SETCPU ??
m using kc1
Click to expand...
Click to collapse
Did he mention overclock?
ketut.kumajaya said:
UPDATE:
update.zip (12.57 MB)
Changelog:
- Using the latest smartass, interactive, and interactiveX source from erasmux
- Fix bug with cpufreq stats, now the CPU Spy can display the CPU Time In State. Possible problems associated with SOD because CPU frequency is too low. May be Sleep Of Death starting from Sleep tO Deep
Click to expand...
Click to collapse
This patch fix SOD then?
izzoe said:
This patch fix SOD then?
Click to expand...
Click to collapse
Using smartass governer, have set it so CPU mode only in Deep Sleep, 245MHz, and 800MHz. Jumping from Deep Sleep to 800MHz. No SOD so far Not sure about battery usage and no report since Froyo not popular here
EDIT: Use these at your own risk! These modules are built from the U8860 source, which is almost the same as the U8800pro one but not quite. In theory corruption may occur as something else may be located at a certain position in memory where the module expects something else to be there. I have yet to notice anything on my phone, but the risk is still there.
EDIT 2: My phone randomly rebooted. I haven't yet determined if these modules were the cause, but, still.
Hi,
Since the SIO IO scheduler is the one I favourite, I built the module for the B928 U8800pro firmware (tested on bronxitas' CWM variant).
1. gunzip the attached sio-iosched.ko.gz in /system/lib/modules
2. chown root.root /system/lib/modules/sio-iosched.ko && chmod 644 /system/lib/modules/sio-iosched.ko
3. Add "insmod /system/lib/modules/sio-iosched.ko" to /system/etc/install-recovery.sh
4. Reboot (or insmod now :shrug and use SetCPU or No Frills CPU to change the IO scheduler.
If you want to use SmartassV2 and/or OndemandX, insmod symsearch.ko first and then the cpufreq modules. Thanks to AnDyX, Skrilax_CZ and whirleyes.
What Is This? Give Me Brief Detail What This Thing Do?
husen4u said:
What Is This? Give Me Brief Detail What This Thing Do?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1558153
qwerty12 said:
Hi,
Since the SIO IO scheduler is the one I favourite, I built the module for the B928 U8800pro firmware (tested on bronxitas' CWM variant).
1. gunzip the attached sio-iosched.ko.gz in /system/lib/modules
2. chown root.root /system/lib/modules/sio-iosched.ko && chmod 644 /system/lib/modules/sio-iosched.ko
3. Add "insmod /system/lib/modules/sio-iosched.ko" to /system/etc/install-recovery.sh
4. Reboot (or insmod now :shrug and use SetCPU or No Frills CPU to change the IO scheduler.
If you want to use SmartassV2 and/or OndemandX, insmod symsearch.ko first and then the cpufreq modules. Thanks to AnDyX, Skrilax_CZ and whirleyes.
EDIT: These were built from the U8860 3.0.8 kernel source which isn't the same as the U8800pro kernel, but close enough. Use at your own risk.
Click to expand...
Click to collapse
Did you use the honor kernel??cos geno release a 3.0.8 kernel from honor source and the usb didnt work and also it corrupt my sdcard...if you have knowlage release a proper kernel working with sio and o/c inside...until then this isnt much help!! :/
pikachukaki said:
Did you use the honor kernel??cos geno release a 3.0.8 kernel from honor source and the usb didnt work and also it corrupt my sdcard...if you have knowlage release a proper kernel working with sio and o/c inside...until then this isnt much help!! :/
Click to expand...
Click to collapse
They're modules - not an entire kernel - built from the Honor source, but tricked into loading on our original Huawei U8800pro 3.0.8 kernel...
It is possible that something can go wrong because this isn't built from the original source (you're not meant to do this - kernel structures in memory may be located somewhere else etc.), but I haven't noticed any corruption on the internal eMMC so far on my U8800pro with OndemandX governor and SIO I/O scheduler [and logcat kernel module built from this source] & USB is working fine
qwerty12 said:
They're modules - not an entire kernel - built from the Honor source, but tricked into loading on our original Huawei U8800pro 3.0.8 kernel...
It is possible that something can go wrong because this isn't built from the original source (you're not meant to do this - kernel structures in memory may be located somewhere else etc.), but I haven't noticed any corruption on the internal eMMC so far on my U8800pro with OndemandX governor and SIO I/O scheduler [and logcat kernel module built from this source] & USB is working fine
Click to expand...
Click to collapse
so you compile the honor source...add the modules and had a working kernel??so its easier to release the boot.img and if you can add o/c but its funny that geno compile honor source and it didnt work properly!!!
pikachukaki said:
so you compile the honor source...add the modules and had a working kernel??so its easier to release the boot.img and if you can add o/c but its funny that geno compile honor source and it didnt work properly!!!
Click to expand...
Click to collapse
No, no! Genokolar actually did some proper work to try and get the Honor source working for the U8800pro but too much is missing (drivers that the U8800pro needs)
My approach was to take the Honor source and bastardize it into getting these modules built (files that let you introduce code into a running kernel after it's been built) and trick them into loading on the original kernel
This is a dangerous trick (there's a reason why the kernel checks to see if the version stored in the module matches your running kernel) because you're not meant to do this (corruption can occur) but so far everything has been working OK for me and I'd rather be using the phone with the modules as it feels a bit smoother. It is possible to add OC support through modules without having to replace the kernel (http://hex.ro/wp/blog/overclocking-an-android-phone-running-with-an-msm-core/) but it's harder to do and more dangerous to do with the Honor sources because it's not the original kernel source. Actually I should edit the first post...
qwerty12 said:
No, no! Genokolar actually did some proper work to try and get the Honor source working for the U8800pro but too much is missing (drivers that the U8800pro needs)
My approach was to take the Honor source and bastardize it into getting these modules built (files that let you introduce code into a running kernel after it's been built) and trick them into loading on the original kernel
This is a dangerous trick (there's a reason why the kernel checks to see if the version stored in the module matches your running kernel) because you're not meant to do this (corruption can occur) but so far everything has been working OK for me and I'd rather be using the phone with the modules as it feels a bit smoother. It is possible to add OC support through modules without having to replace the kernel (http://hex.ro/wp/blog/overclocking-an-android-phone-running-with-an-msm-core/) but it's harder to do and more dangerous to do with the Honor sources because it's not the original kernel source. Actually I should edit the first post...
Click to expand...
Click to collapse
I see that you have the knowlage...and also you can let us try if you want the kernel...but if you manage to o/c it this will be wonderful..and also there is a english word bastardize??? i willing to give your kernel a try although!!
pikachukaki said:
I see that you have the knowlage...
Click to expand...
Click to collapse
I wish I know only the basics - people like dzo and genokolar know what they're doing
and also you can let us try if you want the kernel
Click to expand...
Click to collapse
The Honor kernel is useless - I don't think it would even boot... I just take the modules
...but if you manage to o/c it this will be wonderful..and also there is a english word bastardize???
Click to expand...
Click to collapse
I would like to OC, I admit, but it's very risky to attempt when the person (me) is lacking a lot of knowledge about kernels, CPU clocks and assembly, and when the kernel source isn't the original - I'd have to attempt to guess things from the 2.6 source
And, yes, bastardize is a real word, meaning to corrupt, make illegitimate and reduce the quality of something. It's an apt word for the stuff in the first post!
qwerty12 said:
I wish I know only the basics - people like dzo and genokolar know what they're doing
The Honor kernel is useless - I don't think it would even boot... I just take the modules
I would like to OC, I admit, but it's very risky to attempt when the person (me) is lacking a lot of knowledge about kernels, CPU clocks and assembly, and when the kernel source isn't the original - I'd have to attempt to guess things from the 2.6 source
And, yes, bastardize is a real word, meaning to corrupt, make illegitimate and reduce the quality of something. It's an apt word for the stuff in the first post!
Click to expand...
Click to collapse
hmm at least you have some knowlage.. so you didnt edit the boot.img you edit sideways! hmm if you manage to play with this a bit it will be great....we also have the word basardise and i never heard of it until now...by bastardise (Bastarde) its a curse a "bad" word...we mean someone that isnt his parents child!
Honor boot.img works on our phone almost perfectly, phone boots but some diferent hardware (wifi, camera, bluetooth) doesn't work (ril OK). Cpu has clocked to 1,4GHz and works very stable. We find it moth ago, but with other hardware didn't work we dropped this work. Maybe you could find something usefull from that.
Sent from my ragelis
great job qwerty12!
Trust me what you've done needs more than just basic knowledge
I'll also tell that honor kernel boots up correctly on u8800pro(in my occasion touchscreen just didn't work, so I could only see a beautiful lockscreen there xD).
I think you should try also adding OC. Although I kinda understand you don't want to risk damaging your phone, but I'm pretty much sure that you'll manage to add OC correctly.
Anyways, keep it up!
Again great job and thanks!
Crazy talk...but we can't took rils from GB kernel...or even desire hd or some other similar phone and make our way??and geno again didnt release his honor/u8800+ source kernel code so someone can fix the sd bugs!!
also..good news everyone...(profesor furnworth) i found cm9 device tree for u8800+ dont know if its working properly but someone with linux can give it a try
https://github.com/ivan19871002/cm9_device_u8800pro
https://github.com/ivan19871002/cm9_vendor_u8800pro (Im not quite sure what this is but maybe its needed!)
@pika
great news about cm9. I hope someone is gonna give it a shot and build it. Better post it on anzhi too.The more people see it, the better.
@qwerty12
I had an idea for OC in u8800 pro. The good thing about this one, is that I think is more safe to try out.
I think you can use dzo kernel source!
boot.img from latest dzo aurora works just fine on our phone(only bt + wifi don't work at all - camera works partially)
OC on dzo kernel also works correctly on u8800pro(personally tried this).
I think with your knowledge, you can just grab dzo kernel source and build the appropriate modules.
Please give it a try if you want to.
Again thanks for your great work.
the guy is chinese and he is known in anzhi i dont know why they arent compiling it... i try last night until 8 in the morning with no success! :/
Moihack said:
I had an idea for OC in u8800 pro. The good thing about this one, is that I think is more safe to try out.
I think you can use dzo kernel source!
boot.img from latest dzo aurora works just fine on our phone(only bt + wifi don't work at all - camera works partially)
OC on dzo kernel also works correctly on u8800pro(personally tried this).
I think with your knowledge, you can just grab dzo kernel source and build the appropriate modules.
Please give it a try if you want to.
Again thanks for your great work.
Click to expand...
Click to collapse
The thing is, (I/O) schedulers can be built as modules - load them, and you're adding new functionality. However, the difference with OC support: CPU regulation (probably the wrong term) is built into the kernel - it has to be. With dzo's kernel, overclocking works because the "CPU regulation" code has been directly modified to allow the user to support higher frequencies. With a module designed to enable overclocking for phones where you can, you don't add new functionality like with the schedulers - you're patching the kernel code in memory that controls the CPU.
I will look into it (people infinitely more clever than me have done it for other phones and produced code and, believe it or not, I do actually want to OC my U8800pro and I don't mind the risk personally), but it's unlikely I'll be able to come up with anything since:
I am not a proper programmer (this is probably reason enough to stay away )
Loading modules designed for another kernel is already risky enough, but even more so since I'm dealing with a kernel designed for another model so,
I'd have to look at the 2.6 kernel source to see what the frequencies etc. assigned to the U8800pro are and hope that Huawei didn't change anything for the 3.0 kernel
There is a ics boot.img with OC to 1.8GHz already, but needs to fix sd card mounting bug, on some phones sd card mounts normaly, on other ones didn't mount my phone no maunting sd
Sent from my ragelis
bronxitas said:
There is a ics boot.img with OC to 1.8GHz already, but needs to fix sd card mounting bug, on some phones sd card mounts normaly, on other ones didn't mount my phone no maunting sd
Sent from my ragelis
Click to expand...
Click to collapse
And at mine scruew my sdcard (( it needed format after installing geno kernel
Sent from my U8800Pro using xda premium
Tomorow giris said that look at oc boot.img and will try to fix sd card mounting problem. The new OC boot.img is not geno's work we are in one step further than geno
Tommorow giris will upload to chinese developers my and kamatozko work and... i think that europeans are leaving china customers/developers behind in this situation
I can't upload here kamatozko OC boot.img because it is not finished yet and I even didn't asked his permissions to do that.
Sent from my ragelis
bronxitas said:
Tomorow giris said that look at oc boot.img and will try to fix sd card mounting problem. The new OC boot.img is not geno's work we are in one step further than geno
Tommorow giris will upload to chinese developers my and kamatozko work and... i think that europeans are leaving china customers/developers behind in this situation
I can't upload here kamatozko OC boot.img because it is not finished yet and I even didn't asked his permissions to do that.
Sent from my ragelis
Click to expand...
Click to collapse
chinese cant make nothing except for geno and geno took all the chinese he can get and make miui for them he just can't or won't work with our phone..anyway thats good news let hope more devs pop out!!for once in my life i want cm based rom!
Here is something I have been working on and thought I would share.
It is a 3.08 kernel based on DZOs source and modified with some governer settings the way I like them, a bit of tuning of the voltages and cpu freqs, and a lot of cherry picks from different sources.
Sources:
Mine:
https://github.com/PaulMilbank/kernel_huawei.git
Build off the master branch with the u8800_defconfig if you want to compile yourself.
Where I borrowed from:
https://github.com/Blefish/android_kernel_huawei_u8800: Quite a few cherry picks from the ICS_Chocolate source.
https://github.com/virtuous/htc7x30-3.0.git: Mostly KGSL fixes from here.
https://github.com/ezeteze/u8800-kernel: Gave me an idea about how much to undervolt by.
https://github.com/dzo/kernel_huawei: Pulled some old fixes from the .35 ICS source
https://github.com/TomGiordano/kernel_huawei: Pulled some changes from the .35 ICS Source
Mostly these have been cherry picks that I integrated into my kernel and some tuning by me.
Also thanks to fjsferreira for his guide on compiling DZO source: http://forum.xda-developers.com/showthread.php?t=1577876
Everything that worked on DZOs kernel should work here and it should also fix a few annoying bugs.
Notes:
First Kernel:
The battery life is largely improved. I easily get 24 hours use and could probably get up to 2 days if I turned wifi off and turned mobile data off when I was not using it.
I have not seen the random text corruption on this kernel. I did see it a few times on the original aurora kernel.
It seems at least as smooth as the original Aurora kernel, maybe a bit smoother.
It should leak slightly less memory and handle kernel events better.
It is not magic though, you may still have the odd reboot and not everything is perfect. It should be at least as good as the original and hopefully a lot better.
Not so much distortion over back speaker.
Added SIO cpu scheduler.
07/10/2012 update kernel#22:
Swap and Zram enabled, need to test.
1.8ghz is back
368mhz minimum clock.
13/10/2012 update kernel #54
Some CAF and Huawei pro wifi code for testing.
Changed readahead (may need to wipe cache, dalvic cache for this, seems to cause some apps to force close without those wipes.)
Couple more KGSL tweaks
Couple of Bluetooth tweaks.
14/10/2012 update kernel #55
Revert most wifi changes, I am still getting wifi sticking on, will likely have another revert here too.
Reduce readahead some more, please wipe cache, dalvic cache and fix permissions when flashing after this change.
fix a line of code I forgot to add
Revert a franco change.
Boost lowmwmory killer values to hold a bit more ram free and kill appps/background processes a little earlier.
SuperStock Kernel
Test kernel for those with issues. Just latest DZO config, latest DZO source fresh from his github, no CAF or Franco changes
Undervolt from 308 Kernel
368mhz minimum, might need to set this to 245 to match DZO kernel
lowmemorykiller updated
swap and zram enabled.
Hopefully this should show where issues are occurring in my other kernel.
If you get a reboot, do the following from a terminal or over adb:
Code:
su
cat /dev/block/mmcblk0p7 > /sdcard/crash.txt
Then post the crash file (if it has anything in it) here.
Get it Here:
07/10/2012 Kernel #22: http://www.mediafire.com/?o5niwi1jb73j2jn
13/10/2012 update #54: http://www.mediafire.com/?ih5iy936irt326i
14/10/2012 update #55: http://www.mediafire.com/?u29faeh4v1l0sfw
SuperStock Kernel: http://www.mediafire.com/?67o0y9kc2956fy1
Works in Aurora and Miui, I tried it in AOKP, but it did not boot so something went wrong there, not sure what yet.
Will update here and on GitHub too as I make more changes.
Cheers
Paul
PaulMilbank said:
Here is something I have been working on and thought I would share.
It is a 3.08 kernel based on DZOs source and modified with some governer settings the way I like them, a bit of tuning of the voltages and cpu freqs, and a lot of cherry picks from different sources.
Sources:
Mine:
https://github.com/PaulMilbank/kernel_huawei.git
Build off the master branch with the u8800_defconfig if you want to compile yourself.
Where I copied from:
https://github.com/Blefish/android_kernel_huawei_u8800: Quite a few cherry picks from the ICS_Chocolate source
https://github.com/virtuous/htc7x30-3.0.git
Click to expand...
Click to collapse
Please can u explain the changes in more detail? and where is download link?
Sorry, posted instead of hitting the preview button. Everything up now.
Is it possible to provide only the Kernel update?
Can we undervolt even more?
Actually just noticed... since u modified only the kernel, why you post the whole ROM?
Sent from my U8800
firstly, thank you so much!
I just want to request a tuning in camera, cause camera on aurora 4.1a is a little bit slow (it's delay like 0.3s and blurry as hell:crying
AceDroidX said:
Can we undervolt even more?
Actually just noticed... since u modified only the kernel, why you post the whole ROM?
Sent from my U8800
Click to expand...
Click to collapse
yea, why is that?
EDIT
Ive just saw this
I will sort out an anykernel updater soon, but until then I have put it into Aurora 4.1 with all the updates applied and Geno's Miui 2.9.14.
Click to expand...
Click to collapse
Thanks to you, the screen tearing problem that I had on DZO's 4.1 ICS is gone.
Thank you!
Sorry guys, as it says, will sort out a kernel updater soon, just need a little time. I just already had the roms I had been testing with.
Sent from my U8800 using xda premium
Unicorn9x said:
firstly, thank you so much!
I just want to request a tuning in camera, cause camera on aurora 4.1a is a little bit slow (it's delay like 0.3s and blurry as hell:crying
Click to expand...
Click to collapse
Is this just on my kernel or the original Aurora too? have you tried tap to focus or holding the button down until the square goes green to show it is focussed? Should not be blurry if it is focussed correctly.
Anykernel updater posted.
can you try to compile JB source from code Aurora with this kernel. it might get quite stable now.
Thanks Paul your kernel + init.d tweaks = super silky smooth ui great work mate
Glad it is helping people. What init.d tweaks did you use?
Also I won't be compiling roms from source. I don't have the hardware to do it. Kernels are about my limit.
I get random touches in the right edge of the screen with this kernel. Synaptics digitizer.
PaulMilbank said:
Glad it is helping people. What init.d tweaks did you use?
Also I won't be compiling roms from source. I don't have the hardware to do it. Kernels are about my limit.
Click to expand...
Click to collapse
I used zephyr1988's one, I only just realized he updated it to work with the latest version of aurora
Link: http://forum.xda-developers.com/showpost.php?p=27398688&postcount=1
faekplastik3s said:
I get random touches in the right edge of the screen with this kernel. Synaptics digitizer.
Click to expand...
Click to collapse
Not sure about this, have not changed anything with the synaptics driver. If it worked in DZOs kernel, it should work here.
so if u want to use on aurore i only need to download the file on the first page and your kernel is already there?
Can I use this kernel on Elora ROM?
I was waiting for any kernel!!
Already testing and tearing screen problem gone, WiFi is super fast! You have done really great job!
Huawei u8800 - Tapatalked