Instaling rom without sspl mini - HD Mini General

. .

Thanks to your interesting approach ...
My phone is stuck on bootloader ..
In such circumstances, how can I use your method ..
Meanwhile, my phone belonging to a region that HTC ROM for it has not issued ...
I am waiting for your help ...

. .

it's a very good move to check the SN from HTC.
at least try to make a Hard Reset to see if your phone can bootup!
while the phone is off keep Volume UP and DOWN together and push the Power button to goto Hard Reset screen.

I've email the company HTC
Their answer was:
Your phone from Australia and so far no rom for it yet ...
What should I do now .. that my phone is useless now ..
What method can now pour on Ram ...
Gold Card With this action it is possible ...
I am waiting for friends to help ..
Thanks ...

. .

Thank you
Iam nead HxD hex editor PLEASE
Thanks friends

. .

follow you guide but nothing happed. Screen stuck in HTC logo appear 0%. This is Not solution without HSPL

this is link
Click to expand...
Click to collapse
Thank you very MUCH

Hi, I have a HD mini with s/n sh06tpz01049
I thinks its Australia ,I cant find that code for my phone please help me

help me I have mini hd from austrulia I want cid for it

. .

hey,can you fix your phone?did you found cid ?

. .

Arkadaslar htc hd mini varsa elinizde ve istediginiz bir rom yüklemeye calıştıgınızda In Viled Vendor veya buna benzer hatalar alıyorsanaız (sda_unlock) programını ndirin bir kez calıştırın ve sizden teleonunuzu reboot etmenizi isteyecek bu işlemden sonra istediginiz rom'u yükleye bilirsiniz. Aynı işlemi app yüklerken gecersiz sertifika hatası aldıgınız app yüklemek içinde yapa bilirsiniz. Kolay gelsin )

SSPL
is it possible to use this method on my phone, which have been flashed by using SSPL?
BTW, i am stuck on how to run the ROMUpdateUtility.exe after corect the nbh.
i have the corrected nbh, and what is the next step to flash my phone? creat a folder and put it and ROMUpdateUtility.exe inside and then OMUpdateUtility.exe?
plz give me a hand., i am not so familiar to programming.

I want Australia Original (Ship) ROM.
can somebody help me, pls?
If u can, pls write to me on my profile!!!
thanks a lot

Related

XDA1 and simtoolkit

i have installed cooked rom ver. 4.1.16 , everything is ok but only one problem . simtoolkit doesn`t working .... any sollution ??? thanks petr ...
RE:
can U send me ([email protected]) file stk.exe (i think that it is simtoolkit aplication) i don`t have in rom. ... thanks U
have u already had the stk.exe file since u said it isn't working...if u do have it, u have to make a link to it in the windows startup folder so that u can use the application and then soft reset the phone and give it another try..

Qtek 9000 and Spanish ROM problems with keyboard . . .

Whaasup everybody . . . I figured out (with some very kind help) how to change the language on my Universal , now im using a spanish ROM the only problem is that my QWERTY stop working like it used to . . . I mean now if i press Fn+any of the symbols I use to get , instead I get different ones , for example if I press Fn+Q , I get @ , what gives ?? how can I set my QWERTY like it use to be ??
Also im trying to install XCPUScalar 2005 (I use to have it when my device was in English) and now it does not show in the Archivos de programas folder (program files) I tried changing the name to Program Files with no luck . . . any pointers on that ?? any help will be highly appreciated it .
God Bless . . . !!
Anybody ?? any of the spanish users out there ?? I have seen some of you using spanish ROM´s , can any of you kindly help ?? Hope you guys can help . . . thanks !!

FORMAT FAIL !! during a hard reset.

hey guys thanks for being helpful alot of times..
My O2 XDA MINI S gets stuck at the startup operator logo ..
I FLASHED IT WITH THE NEW 2.21.4.1 ROM AND OS ,, but its still the same
NOW IM TRYING TO FORMAT IT WITH A HARD RESET BY PRESSING THE SEND BUTTON ,,BUT IT SAYS "FORMAT FAIL"..... Please help me as i really miss the phone..
I am afraid that usually means you have a faulty rom memory chip. Send the device back to the supplier for repair - its a hardware problem not a software problem.
Thankz for the reply ....
BUT IF ITS A hardware fault how was i able to flash it to the newer version ? 2.21 ?
Is there any thing else i can do to the phone ? to make it ? LIKE THE IMEI OR SOME KIND OF LOCK ?
help would be appreciated !!
simlockboy said:
Thankz for the reply ....
BUT IF ITS A hardware fault how was i able to flash it to the newer version ? 2.21 ?
Is there any thing else i can do to the phone ? to make it ? LIKE THE IMEI OR SOME KIND OF LOCK ?
help would be appreciated !!
Click to expand...
Click to collapse
The rom will flash but stll fails to boot - there have been other posts with exact same problem and that was the reply by summiter or faria if I remember right. (Both v experienced at flashing and putting together roms) Do a srearch - failed format will prob find those posts.
alright i will research and get back .... thankyou very much .. appreciate your help
I DID ALOT of researching and got this.. please see it im sure everyone will need it some time.... and please advise me on what to do next ..my email is
[email protected]
if you have a os dump of a O2 XDA MINI S .. please mail it to me
Regards
ive heard if I can upgrade the phone through the SD CARD then it can get back to normal ..
Please some one can be kind enough to guide me through it or mail me the dump of the os for the sd card.. O2 XDA MINI S
Me too ! The same to you !
simlockboy said:
ive heard if I can upgrade the phone through the SD CARD then it can get back to normal ..
Please some one can be kind enough to guide me through it or mail me the dump of the os for the sd card.. O2 XDA MINI S
Click to expand...
Click to collapse
I had and now I can't do anything, so hope somebody help us, try to find out how to save ourlife's !
Pls help us !
ps: My' mobile is T-Mobile MDA
Me too ! The same to you !
Pls Mod delete it for me ! Thanks !
formate failed
i have o2 1.5.4.2
ipl spl 1.05
flashed with lauch rom
steel same
whats a problem...

................

...............................................
100% solution...
search ....
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
and run.....
reply me..... mail : [email protected]
i am also in india.....
and trying rom upgrading .... replacing so many times...
want to see smile on your face...
Sachin Gawate
Karad Dist Satara [Maharashtra]
You can DO IT
abhayjeet said:
hi guys,
i m abhayjeet singh frm india and had bought orignally an o2 neo xda phone with dopod rom and accidentally installed the o2 neo update frm o2 germany site...which installed smoothly.i did'nt knew that it would be in germany......so can anybody pls help me in reverting back to the dopod or any other english rom. i had tried to install back the dopod rom but in vain. maybe due to cid lock....pls help step by step and location of the softwares......there are already many forums about this but could'nt understand a word...pls hepl me urgently and pls contact me on [email protected]....
warm regards,
abhayjeet singh(abhay)
Click to expand...
Click to collapse
hi I m from also from India...
had same problem
Solution
you can go to ftp://[email protected]/Prophet/Shipped_Complete_Updates/
if it asks you for any user name and PW use
Username: xda
Password: xda
Pls remenber to login first and than download.
Download the PROPHET>>>DOPOD>>>>NO VENDOR ID WWE As ENG.
Then go to the go to the boot up screen on phone (HOLDING RESET+ CAMERA AND COMM MANAGER BUTTON)you will come to a screen displaying only 3colours.
Now connect to your PC run the software (WWE version)remenber you choose no vendor ID or u will be stuck...
after connecting do as screen shows next>>>next .... it will install the WWE ie.,World Wide English.
pls dont download crossbow ie WM6 as there are still some issues with the ROM
Pls tell me if it solved ur problem...
Dont worry its a common problem with all beginners..

which Original radioRom is good for jasjam(back rdio-imei-gsm)

hi dears
i have same problem with jasjam model(i dont have radio-imei-protokol)'can u help me & say what model of radio rom must i install on my devic.pleas if u know send me some web linke for downlod .
i have a puestuion too.how can i install telestra roms on device by micro sd pattern becuse that file is exe file & dont have nbh(that i need to cheng hermimg)
thanks

Categories

Resources