I installed Euro firmware, on the second flash everything just stay'ed black, and I waited awhile till I decided to power off then power back on. First thing I saw was AT&T connect boot screen, then it went black but I can still hear Samsung's power up theme, also device has a Vertical Line running down the right side. I noticed that If I press power button twice Tab comes on, and everything looks great, so I rooted my device and installed Titanium Backup,Everything seems okay. So my question is how do I get rid of the AT&T Boot logo and to be able to see Samsung logo on boot?
\\\\\\\Exactly what happens on fresh boot/////
-fresh boot- AT&T Connected screen comes up, then screen goes black with the line on the right, then Samsung's power up theme song comes on buttons light up screen stays black line goes away, then screen still black, then to initialize the screen I press power button twice. Comes on and works fine.
****Would love to fix that part, I would be most greatfull for life! Willing to pass on info, to all who want more!****
*need help on pre-installed boot screen*
I installed Euro firmware, on the second flash everything just stay'ed black, and I waited awhile till I decided to power off then power back on. First thing I saw was AT&T connect boot screen, then it went black but I can still hear Samsung's power up theme, also device has a Vertical Line running down the right side. I noticed that If I press power button twice Tab comes on, and everything looks great, so I rooted my device and installed Titanium Backup,Everything seems okay. So my question is how do I get rid of the AT&T Boot logo and to be able to see Samsung logo on boot?
\\\\\\\Exactly what happens on fresh boot/////
-fresh boot- AT&T Connected screen comes up, then screen goes black with the line on the right, then Samsung's power up theme song comes on buttons light up screen stays black line goes away, then screen still black, then to initialize the screen I press power button twice. Comes on and works fine.
****Would love to fix that part, I would be most greatfull for life! Willing to pass on info, to all who want more!****
Install euro firmware with bootloaders. JJ4 is good one since it's bootloader is not signed. Then you can install newer euro firmware over it.
However, so far there is no known way to go back to AT&T bootloaders. So you ca't fully restore to AT&T if needed.
Sent from my GT-P1000 using XDA App
Thanks
Thank you for your reply, I will think about it! Seem's I have to make a choice. But at least there is a way to fix the problem.
Thanks!!!!!!!!!!!!!!
I got a samsung vibrant Tmobile and after flashing a custom Rom
I got AT&T bootup screen! Any answer will be appreciate !
There is a thread for this titled "How to fix at&t black screen with thin white line at boot up". I know you can find it by searching - I wrote it.
Hi guys
I am the happy owner of a hacked through Galaxy Tab 10.1 3g running the latest CM9 build from Pershoot (0419) and I had a weird experience with it today.
It has a bug where sometimes the lock screen doesn't accept touches and the screen does not go entirely black (it just dimms) when I press the power button. All I have to do to fix it is force close and reboot the tab. But this time it woke up and got seriously ****ed.
While still showing the Samsung logo the entire screen suddenly shifted 1/3 to the right and stayed like that all the way into Android, through CM9 boot animation and all. All touches registered in the right places, but everything on screen was off. I shot a little video (with my GNex) so you guys can see what I am talking about:
http://youtu.be/cAeRxt36Vuw
Has anyone else experienced this? Or is it just me?
As you see in the video, it went away after a reboot...
you dont even need to do all that.
1. plug in usb
or
2. let the screen turn off, hit power once, unlock.
kernel 0425, and kernel 0426 should sort any remaining touchscreen issues.
the shifted screen is an anomaly on your specific tab for this incident.
go to droidbasement, grab 0425 kernel (will be refreshing 0426 tonight after investigating one incident so i wouldnt flash it), flash it, and youll be ok.
During the first boot screen (the one where "Samsung galaxy S IV - I9505" is displayed) there is a vertical green line of pixel in the left of the screen who runs across the entire screen from top to bottom.
It disappears immediately after during the boot animation from my carrier and it never appears anywhere else when using the phone. Besides that everything is working fine and I haven't got any issue with the phone, no dead pixels or other problems I can think of.
I'm just wondering if it's an hardware issue and I should be worried about it and change the phone at the shop or if it's just some weird kernel bug who could easily be fixed.
I could already have checked by installing another rom but I don't really want to tinker with the phone because of warranty issues...
My phone carrier is Orange France.
So I recently got back into my s7 edge because my s8 plus screen broke and I had to order a new one. This is my issue:
I stopped using my s7 edge like 8 months ago because the battery got inflated and the cover came off. I bought a new battery today and replaced it myself. But when I conected my s7 to the charger it just shows a small blue message on the upper left corner "Recovery Booting" It flashes. I can get no commands to work. Ive tried them all. Hard reset, download mode, etc none work. I never did nothing risky on my device. I just used it for whatsapp, messenger, and youtube. My pc doesnt recognizes the phone and It wont power on. Not even to the samsung display logo. It doesnt even show the green battery charging animation (when the phone is off, and charging).
Really hope someone can help me. I really need to fix this ASAP cause of my work.
After some researching I think I might have a hard bricked s7 . I will buy a jig tomorrow. Hopefully that will help
You should think about changing the thread title.
Most people wont open a thread with "Please help" as the title...
I recently got a 2nd hands S7 Edge. It had a software issue (I'm guessing he tried to install a custom Rom but forgot to unlock the BL...). So I reinstalled stock android 8.0.0 and it went successful. Before I installed android, it already had a glitchy flickering screen. When brightness is MAX and it's on AUTO, most of it disappears. But when the phone gets a little hot, it comes back. This is very annoying since it's on the bottom of the screen and there are a lot of buttons there, so I can't really see where I'm pressing. I have tried master reset via android recovery. Nothing happened. I have also tried via safe mode, still the same. I have checked the Liquid Damage Indicator and it's still good. There aren't any major scratches on the screen. Just a some small scratches on the home button. And the glitch already appears when the Samsung logo comes up. Idk if this is useful but the glitch isn't visible in a SS.
I hope someone can help me with this.
I will post pictures in like an hour, because this is the only phone I have access to.
Thanks in advance!