Related
I have Xperia X8 with Eclair update. When I try to flash with X10 Flash Tool it always says Searching for Xperia... Yes I connected the phone in flash mode by holding back button and conecting with usb, I have usb drivers. Non-gui version says the same. I have tried to flash 1.6 firmware from "Going back to 1.6" thread. Please help me, fast!
please post question at general section
Flash Tool help
Try connecting the phone in flash mode, when the flash tool displays "Searching for Xperia ......"
Solved!
Solved! I just installed some drivers from some site. Yes i know i was telling that i have drivers, just i did not know i have incorrect drivers.
Now i am back to Android 1.6!
Can somebody sugest me way to root my Xperia X8?
Now, follow the Step by Step TUT.
Step by Step TUT
Now Rooted 2.1. Thanks for help.
Next time it should help: http://forum.xda-developers.com/showpost.php?p=9510216&postcount=16
How can I install the drivers?
I've downloaded the files with the i386 and amd 64 files but I don't really know what to do with them.
When the device is on the pc is ok with it but when I'm in flash mode the pc just doesn't recognize it and the flash tool says that it's searching for my xperia.
What can I do?
Thanks, Tal.
SaNTi285 said:
How can I install the drivers?
I've downloaded the files with the i386 and amd 64 files but I don't really know what to do with them.
When the device is on the pc is ok with it but when I'm in flash mode the pc just doesn't recognize it and the flash tool says that it's searching for my xperia.
What can I do?
Thanks, Tal.
Click to expand...
Click to collapse
Download automatic install from this link http://www.akshayy.com/sonyericsson/wp-content/uploads/SE_USB_Driver_installer.zip
Press the thanks button!
I've installed the drivers you gave me and it still didn't work even though the computer recognized it now but still in device manager i have it under a yellow triangle sign.
what can I do now? maybe it's my computer that make the problem?
I'm really getting frostrated about it and don't know what to do.
Full instructions.
SaNTi285 said:
I've installed the drivers you gave me and it still didn't work even though the computer recognized it now but still in device manager i have it under a yellow triangle sign.
what can I do now? maybe it's my computer that make the problem?
I'm really getting frostrated about it and don't know what to do.
Click to expand...
Click to collapse
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!
Still not succeeded with flashing.....
velnens123 said:
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!
Click to expand...
Click to collapse
I am still not succeeded with flashing my x8 to android 1.6 (now having 2.1) so i can root 2.1. I am a really noob, so i hope anyone can help me
What did you mean with yelllow triangle, and where can you download non-gui version? When i open the x10flash.bat i cannot write anything (there is nothing happened when i press 2 or Y.
I hope anyone can help me
(Sorry for my bad English)
Explain for Noobs!
thomaszq said:
I am still not succeeded with flashing my x8 to android 1.6 (now having 2.1) so i can root 2.1. I am a really noob, so i hope anyone can help me
What did you mean with yelllow triangle, and where can you download non-gui version? When i open the x10flash.bat i cannot write anything (there is nothing happened when i press 2 or Y.
I hope anyone can help me
(Sorry for my bad English)
Click to expand...
Click to collapse
Yellow trinagle is located in device manager!(just look at other thread)
You can get non-gui version in Bin4ry thread "X10 Flash Tool...and so on"
You need to open x10flash.bat in non-gui folder.(not gui)
velnens123 said:
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!
Click to expand...
Click to collapse
Im still stuck on step 1. The yellow mark still wont disappear no matter what I have tried to reinstall/update the driver.
I have let the wizard to search the internet for correct driver, and I have point it to specific folder with the driver in it, I have tried several versions of the driver that I can find on the net.
I keep getting "the hardware was not installed because the wizard cannot find the necessary software" error.
I can use Flash Tool GUI to root my X8 and to install XRecovery. Those were done successfully. And we are talking same session same day here. Just straight after I rooted the phone and installed Xrecovery, did a backup, then I wanted to flash to 2.1 but then this happened.
Only when the phone is connected to the PC in flash mode.
Can anyone help point me in the right direction?
Forgot to mention: the driver I'm talking about is SEMC signed driver. That is the driver for flashing right? Or have I totally missed this point all together?
I got it working now. It was not SEMC driver that's needed. It should be the gordon's gate driver. For some reason that driver went missing. I have installed SEUS and managed to flash my phone yesterday using SEUS. So definitely it was installed, but disappeared today or sometime after I used SEUS last.
Hoi Hoi people
i got myself a GT540 Optimus <yes total newbeee to android>
It came with a deal for free and its my 1st android :0
anyway
After USING the official way (silly me )to update I now have some odd Portuguese apps installed ? Stuff from SAPO.pt ???
I didn't do any Sync backup as i just got the phone and its basically empty
I used the Updater tool from LG connected and all went well But after I look I was able to change the language to ENG but it has quiet a few Portuguese Apps installed...
I am in Holland so i cannot see how this updater decided to give me a POR image ?
Now i could make a guess and say the IMEI is for Portuguese market(?) and the dutch INTERNET cheapo middleman I got the deal from has bought a bunch on the gray market ..
Whatever it is i don't care
I would like you guys now to point me the right way
I just flash the thing myself
I think the tool i need is called KDZ ?
Please someone point me to the right post I am looking but seem to get nowhere
just more confused
Thanks guys
B.T.W I am not too inept . I am used to flashin me HTC HD all the time ..
Follow the thread: http://forum.xda-developers.com/showthread.php?t=802895
to update to v2.1 Eclair.
or
follow
http://forum.xda-developers.com/showthread.php?t=857213
to update to Quarx's OpenSwift project v2.2.1.
Make sure you read the instructions very carefully.
Toen je de officele lg updater gebruikte, welke taal was hij toen?
Het kan zijn dat je dat aan het begin verkeerd heb ingesteld.
Joost
Thanks a lot guys
I followed the hints and now my LG is dead ..
LOL
This is rather annoying
1st I get a Crap gray import from 2call
then LG puts a Portuguese update rom on it??WTF!>?
while i choose NETHERLANDS with language english
but nevermind
buy **** buy twice thats life
My 1st and last lg phone ?/
What kind of rubbish is this
u update using the official LG tool and they play a freckin foreign rom onto my LG (SAPO.PT) then I cant update it at all anymore using the tool . So i look for alternatives but thats just made it worse ...
Really really poor this ..
Now ...I followed the guide but it didn't work ..well it did until restarted
My lg is now black. Dead ! doesn't start up at all !
Doesn't start no-matter what i try !
not even emergency mode.
And no guys I read the instruction word for word !!!!
I followed it to the letter !!!!! and the update did work ..Just now it doesn't start at all anymore.
I should of known reading around
there are too many update ways people are doing this ..Hack tool or original KDZ ..or just Black system way ..Too many loopholes for things to go wrong ..but now too late
Hmm...
Try a reflash...
This is a guide I followed from another forum, and posted elsewhere with some minor additions in case anyone had problems.
The guide is from a forum post at the android forums,it is NOT my work, the added bits are mostly what I have found from browsing here and from asking questions. While I can't be held liable if you mess your phone up having done so myself I thought this could helpa few people and save them searching various threads for answers so hope it helps
The guide
To install this ROM you need to have fastboot enabled on your phone. If you have Android 1.6/2.1 installed from LG, then fastboot is not enabled. I will explain how to enable fastboot on your phone (this involves re-flashing/replacing your currently installed firmware):
I am unable to post links yet so you will have to copy and paste the appropriate link into your browser replacing the ** with tt
KDZ Updater Carphone Warehouse Unlocked.zip can be downloaded at h**p://goo.gl/7aRTc - A link to a zip archive with all the files needed to flash to Android version 2.1 with fastboot (Carphone Warehouse Unlocked)
KDZ Updater Europe Open.zip can be downloaded at h**p://goo.gl/BOcYT - A link to a zip archive with all the files needed to flash toAndroid version 2.1 with fastboot (Europe Open)
Download the version that best applies to you, if you live in the UK, I'd recommend you download the Carphone Warehouse Unlocked version, whereas if you live in Europe, I'd recommend the Europe Open version (simple right? )
I live in the UK and used the open rom from Europe as the Carphone Warehouse rom would not install
Now, how to flash these versions; I'll explain in detail how to flash the ROM's from starting with backing up.
Instructions to install ROM with Fastboot:
1. Before you start, make sure you backup all your data by installing the z4root.1.3.0.apk file onto your phone, then open it and choose 'Permanent Root'. Your phone will root and reboot. Then go to the Market and install 'MyBackup Root', open it and do a backup of your apps and personal data (contacts, sms, call log etc.) Once this is done, go to Settings>SD Card and Phone Storage>Unmount SD Card, a notification in the notification bar should appear saying 'SD Card safe to remove'. Remove the battery cover and remove the SD card and store it in a safe place. Then continue to step 2.
2. Extract the .zip file you downloaded to your computer (e.g. your desktop). Open the folder and install MSXML 4.0 SP3 Parser (msxml.msi).
3. Once that has finished, install LGAndroidDriver_WHQL_ML_Ver1.0_All_Win7.exe which are the drivers so your computer will recognize your phone.
4. Next, open KDZ_FW_UPD.exe
(i) Change 'Type' to '3GQCT' *THIS IS A MUST, THE UPDATE WILL NOT WORK OTHERWISE AND YOU MAY BRICK YOUR PHONE*
(ii) Make sure 'PhoneMode' is set to 'DIAG'
(iii) Browse for the 'V20B_00+Fastboot.kdz' file.
5. Prepare the phone by enabling USB Debugging by going to Settings>Applications>Development>Enable USB Debugging and connect the phone to the computer via USB cable and wait for the drivers to install for the phone.
6. Click 'Launch software update' and do not use your computer until the update is complete. The update will take roughly 10-20 mins to complete.
If you have a problem with this try a different rom, this guide offers two to choose from.
Instructions to install CyanogenMod:
Once the update is complete, your phone will reboot, what you need to do is power off the phone and whilst the phone is off, press and hold the 'Camera' button all the way ANDpower on the phone, make sure you hold the 'Camera' button. The phone will display the LG logo and disappear, then display a blank screen. The phone is now in fastboot mode!
Now you want to download this file: Flashing CyanogenMod.zip and extract it to a folder called 'Android' (without the quotes '') on the C: drive (you'll probably need to make this folder yourself.
1. Now open CMD with administrator privileges (Search for CMD in the start menu and right click on 'cmd' and click 'Run as Administrator' )
2. Connect the phone to your computer via USB cable and wait for the necessary drivers to install.
If when connected with a usb cable the computer says "waiting for device" and nothing else happens try installing the fastboot drivers. You can do this by going to the control panel of your pc, from the Windows start menu, opening the list of devices and where you see the one representing your phone (likely, as was the case with me, it will say android and have a yellow exclamation mark over it). Different versions of Windows do things slightly different but what you need to do is simply update the driver by choosing the icons properties box choosing UPDATE or INSTALL DRIVER and when asked pointing it to the folder where you unzipped the drivers.
3. Then go back to the cmd window and type:
Code:
cd C:\Android
(i) Then type:
Code:
fastboot.exe -w
(ii) Once that's completed, type:
Code:
fastboot.exe erase system
(iii) Once that's completed, type:
Code:
fastboot.exe flash system system.img
(iv) Once that's completed, type:
Code:
fastboot.exe flash boot boot.img
(v) Once that's completed, type:
Code:
fastboot.exe reboot
4. Your phone will now reboot with CyanogenMod 6.1.1 (Android 2.2.1). The first boot might take longer than a normal boot.
If your phone stays at a blank screen you simply forgot to do one of the above steps, in which case simply repeat them. It is likely if that happens that you simply forgot the flash boot image instruction.
5. You can now re-insert your SD card and go to Settings>SD Card and Phone Storage>Mount SD Card
Enjoy!
The instructions for flashing both the firmware with fastboot and flashing CyanogenMod are included in the zip archives called 'Readme'. I'll update the links so that you'll always have the most up to date version of CyanogenMod available for download, note that if you choose to update your phone you will loose all your data including apps etc. so backup before you update
And that, with a few comments added by myself, is the guide.
Once you have set your phone up the way you want power off your phone. Hold the HOME and POWER buttons down while the LG logo appears and you will see a menu appear on screen.
Using the volume down key to navigate the different menu choices, and the camera button to select an option choose the BACKUP OR RESTORE option and from the sub menu that it will give you choose BACKUP.
This will make a backup of your phone AND all your data, if you ever mess up an update or think you have damaged your phone in the future simply holdthe POWER and HOME buttons down and when the menu appears choose the RESTORE option
Click to expand...
Click to collapse
And...
Don;t forget to install Fastboot drivers.
Dude
thanks a lot for your lengthy post and effort .I appreciate it .
but unfortunately U seem to miss the post I wrote.
MY LG doesn't even start anymore after using the Hack tool to upgrade it ...
SO its futile ??
I cant start the phone at all ...
After following yesterdays advice Its dead ..
Great init
Oh dang. Doesn't even turn on? No LG boot logo?
Well...if it's bricked...the only three ways are:
1) Get it repaired/replaced.
2) Buy a new phone.
3) Use it as a paperweight.
=)
No my friend ..its DEAD !!!!
following the guide to the letter
Installed parser got the hack tool
run all as admin and made sure I started windows enabler
All the things in the guide
worked a charm until reboot
Not its black and dead!!!
ANY IDEAS !!!!?????
Have you tried this...
If you did it with kdz updater than:
pull out battery, sim and sd
connect phone with computer
disable lg modem in the device manager
flash a rom with fastboot
go in fastboot by camara+power
connect to computer
type 'fastboot -w' and 'fastboot reboot' in cmd
Click to expand...
Click to collapse
I cannot see why this could work
The phone is dead ! it doest charge! it doesn't connect to the pc ! USB cable in out makes no difference !
I d love to try but how ??
contact303 said:
I cannot see why this could work
The phone is dead ! it doest charge! it doesn't connect to the pc ! USB cable in out makes no difference !
I d love to try but how ??
Click to expand...
Click to collapse
You can try by pulling out your battery, SIM card and SD card...
Note to you: Try everything that is possible and don't give up. Maybe you will fix it if you try.
Yes of course man I ll try thanks for the encouragement and your effort
It doesn't power at all
I DOESN'T connect to the pc
It Makes no difference if i have battery in or out .
sd card and sim are long removed ..and I tried with and without battery as well.
It updated, then rebooted to never come back ...
update tool reported Finished at the end
but its dead !!!
I understand id have a chance if i had at least a boot but I dont It dotn boot it dont Power up
Try getting into Emergency/Download mode by holding down "Volume Down" button and plugging into PC.
After that...try reflashing.
GL man.
Nope
Tried that combination as well
contact303 said:
Nope
Tried that combination as well
Click to expand...
Click to collapse
Opps sorry..."Volume Down" + "Power BUtton" while plugging into PC.
Try a hard reset as well...
Hold down VOLUME UP + HOME + SEARCH buttons for 5 seconds. (But phone needs to be turned on...)
MegaBubbletea said:
Opps sorry..."Volume Down" + "Power BUtton" while plugging into PC.
Click to expand...
Click to collapse
LOL yeah i knowww
I tried that as well
NO luck
hard reset i cant Its not on ...
Well...does anything happen when you press the "Power button"?
Dude LOLOL
Read again my 1st 2 posts
ITS dead ! nothing happens!
With battery or without makes no difference
NO BOOT! No power nothing
i followed the upgrade post in your 1t reply
it went all very well as i say
then it reboot and never got back
Hmm...probably give it a rest for a while...and then try again.
If all else fails..last resort.
Send back to LG for repairs or replacement.
mmh
So I gues iam screwed ..
I didn't even want to get into moddin the gt540 . Just the OFFICIAL 2.1 release really ..
And even that LG cant do without f&*kin me phone to Portuguese
So Well done LG )
I have spent Hours on this site looking for help with my phone...
I have down loaded app after app. reset factory setting. hard reset the phone. but the fact is my phone will not Root. I am with sask-tel. this all started with me wanting to unlock the phone.
What the phone will do:
down load apps
hook up to wifi
hard factory resets(up and down /power button)
usb debug
but thats it. if I try run a root program it does nothing. if I try to open the tech aids(down and power) nothing happens it says downloading for hours.
I have manually looked for the efs file and SU start commands are not reponding(jack's program for got the name).
Model number
GT-i9000m
firmware 2.3.3
baseband version I9000Ugkg3
kernel version
2.6.35.7-19000ugkg3
[email protected]#2
build number
gingerbread.gkg3
Mobile network type
Umts
yeah soo... please help sorry the post was so long I have no idea what I am doing...lol
Have you checked this thread??
http://forum.xda-developers.com/showthread.php?t=939752
Gti9
UMMM..
gcuchiha said:
Have you checked this thread??
http://forum.xda-developers.com/showthread.php?t=939752
Gti9
Click to expand...
Click to collapse
I did look at but it still does not help me as I am trying to refresh all the software in the phone because some one delete vital file Samung told me the carrier did it and they are the only ones who can fix it. I am really startiung to dislike Sasktel
but I really cant afford to by a new phone that 22 percent, or more, of my monthly income.
keepitsimpleplease said:
but the fact is my phone will not Root. I am with sask-tel. this all started with me wanting to unlock the phone.
Click to expand...
Click to collapse
Flash this rooting kernel using odin and install superuser and busybox from the market
keepitsimpleplease said:
if I try to open the tech aids(down and power) nothing happens it says downloading for hours.
Click to expand...
Click to collapse
If you are trying to get into recovery, it's volume up, power and the home button.
Volume down, power and the home button gives you download mode, so it's normal for it to say "downloading" for hours.
try the file xsenman posted. Put your phone in download mode, open Odin, choose the file under PDA, plug in your phone
(make sure you have the Samsung USB drivers installed) and that the ID:COM box is lit, then flash.
Once it is finished, download Busybox and Superuser from Google Play and you are rooted.
By the way, KG3 is a very difficult ROM to get a rooted kernel for.
Ian
I'll try that....
Thhank you very much... I do hope that it works. I am taking a couple days break from it all. spend 9 hrs yesterday trying to simply diagnose, and for some one whom knows nothing about system programs, or tech access points for the phone I think I have done well for a newbie.
So far all I have been able to do is fix every lag in the phone. lol. thank you for the File link and for the walk through
Quick questions
w98seeng said:
If you are trying to get into recovery, it's volume up, power and the home button.
Volume down, power and the home button gives you download mode, so it's normal for it to say "downloading" for hours.
try the file xsenman posted. Put your phone in download mode, open Odin, choose the file under PDA, plug in your phone
(make sure you have the Samsung USB drivers installed) and that the ID:COM box is lit, then flash.
Once it is finished, download Busybox and Superuser from Google Play and you are rooted.
By the way, KG3 is a very difficult ROM to get a rooted kernel for.
Ian
Click to expand...
Click to collapse
Ian,
How do I insure my "Samsung USB drivers" are installed?
Can you please further explain what you mean by "ID:com box is lit"
Thank you
Re
Samsung drivers are installed together with Samsung Kies. If you already have Kies installed on your computer and it connected successfully at least once before then you have the right drivers.
Now, when flashing anything onto your phone the Kies application must not be running. Make sure you stop it (e.g: by stopping any Kies service from Windows Services).
"ID:COM box is lit" means one of the upper boxes in Odin turns green.
The steps are:
1. Start Odin on your computer and select the PDA and CSC files (you should find more details about what files to flash in other posts)
2. Start your phone in Download mode : Vol. Down + Home + Power until you see Downloadin
3. Connect the USB cable to your phone.
If none of the boxes turn green in Odin you should try different USB ports on your computer. One of them will eventually work.
Yes! i have mine 16GB ROW rooted!
The link is in Chinese, i am for sure will have some kind soul will translate it to English.
http://cnzhx.net/blog/apx-root-thinkpad-tablet/
download link of 2 files is at hotfile. please find the link at 5th post.
enjoy rooting.
& i will say, finally i got life back on my TPT!
I had heard it was coming. Good deal. Now I can give up root to get repaired without fear.
Could someone host the two needed files somewhere? Its a pain in my ass to load these from these Chinese hosters...
coming soon! uploading to hotfile..
hope helps
https://hotfile.com/dl/169617659/de8c673/CWM.rar.html
https://hotfile.com/dl/169617791/ac3fa3c/root.rar.html
nsxt99 said:
Yes! i have mine 16GB ROW rooted!
The link is in Chinese, i am for sure will have some kind soul will translate it to English.
http://cnzhx.net/blog/apx-root-thinkpad-tablet/
download link of 2 files is at hotfile. please find the link at 5th post.
enjoy rooting.
& i will say, finally i got life back on my TPT!
Click to expand...
Click to collapse
Any steps to follow on how to root my TPT ROW on a mac?
Does not work at all for me. nvflash shows me the typical 0x4 error when it tries to injct the bootloader bin file...
This will work only on unlocked devices, because it uses nvflash and i can't find any sbk in the bat files (cwm.zip). The root.zip only contains the known exploit for devices below ICS.
nsxt99 said:
Yes! i have mine 16GB ROW rooted!
The link is in Chinese, i am for sure will have some kind soul will translate it to English.
http://cnzhx.net/blog/apx-root-thinkpad-tablet/
download link of 2 files is at hotfile. please find the link at 5th post.
enjoy rooting.
& i will say, finally i got life back on my TPT!
Click to expand...
Click to collapse
Yes, I heard this and tried it on my US 32Gb version, but i failed.
Got an write/read error/warning, then the program stopped.
As I know, this rooting method ONLY works on ROW versions, but not US version.:crying:
It did fail, but did not bring any bad effects to my TPT. I just updated to the stock OTA3.5 smoothly.
Anyway, thanks for sharing.
Hey guys, i just wanted to tell you that it worked for my OTA3 TPT ROW.
Tip: try extracting the recovery image from your rom (eg. US) and put it instead of the one provided in there rars, it might work for you.
Cheers!
Google did it's best to translate the think but I'm a little weary to try it as the steps are still a bit garbled.
EDIT: Does anyone have a stock rom? I'm looking to do what the last commenter suggested and switch out the image.
goodboynyc said:
Google did it's best to translate the think but I'm a little weary to try it as the steps are still a bit garbled.
Click to expand...
Click to collapse
I followed the translated instructions and am now running CM10 on my 16GB ROW. It's fantastic -- like having a new device.
The instructions are pretty simple to follow. I had one problem though.
To use nvflash, you need to start the tablet by holding down the rotation lock button and then install the provided driver in Windows. This works well. However, after performing a flash, Windows would no longer recognize it if you power it on while holding the rotation lock button. To gain access to the special recovery mode again, I had to uninstall the device and driver in Windows Device Manager, and the reinstall again when prompted.
Because the whole procedure requires multiple flashes with nvflash, I had to perform this uninstall-reinstall process several times.
Other than that, it worked perfectly well.
Hope this helps if anyone encounters the same issue.
Does this mean we have the key for nvflash?
Sent from my ThinkPadTablet using Tapatalk 2
My question in regards to this is can we build a flashable rom of this? And would this work with the US TPT?
Sent from my ThinkPad Tablet using XDA Premium HD app
crabnebula said:
I followed the translated instructions and am now running CM10 on my 16GB ROW. It's fantastic -- like having a new device.
The instructions are pretty simple to follow. I had one problem though.
To use nvflash, you need to start the tablet by holding down the rotation lock button and then install the provided driver in Windows. This works well. However, after performing a flash, Windows would no longer recognize it if you power it on while holding the rotation lock button. To gain access to the special recovery mode again, I had to uninstall the device and driver in Windows Device Manager, and the reinstall again when prompted.
Because the whole procedure requires multiple flashes with nvflash, I had to perform this uninstall-reinstall process several times.
Other than that, it worked perfectly well.
Hope this helps if anyone encounters the same issue.
Click to expand...
Click to collapse
I need to try this. But from what I understand this only works for ROW versions and not US versions(given the attached files from the OP). If someone could post an image of a US version I'd cross my fingers and give it a go.
I can't even get past CWM.bat.
I get an NvError 0x30011.
goodboynyc said:
I can't even get past CWM.bat.
I get an NvError 0x30011.
Click to expand...
Click to collapse
Same here and before is a hidden 0x4 hidden by a CLS command inside the script.
I'd be great if we could get some developers input. I program in C++ and Visual Basic but have no experience with Android/Linux to be able to look deeper into this :S
Moved To General
If somebody wants to write a guide and supply a proper dev section thread, fine. But this thread is not development.
Hi, I have succesfully rooted my ROW 16GB Wifi-only ICS 4.0.3 tablet following chinese guide. Excuse my english, Im not native speaker . I'll try to explain what I did:
1. make sure you can see your TPT with "adb devices" command.
2. turn off your device, make sure you have USB cable connected, hold rotation lock button + power on device to get to APX mode. Screen will not turn on, but windows will find new APX hardware unknown.
3. update software driver for APX, set CWM folder manualy. You should now have NVIDIA USB Boot-recovery drover for Mobile devices installed.
4. in APX mode run "cwm.bat", after its done, reboot device to APX mode and press any key, dont press it before you restart your device. You can see CWM_recovery.img installing to your tablet. Follow instruction...
5. After step 4 is done, reboot your device to Recovery, when you see small lenovo logo spam volume up button until you see "booting to recovery kernel mode".
6. Navigate to mount and store using vol +/- button, power button to confirm. Select mount /system
7. make sure you can still ses your device using "adb devices" command, and run root.bat, follow instruction. When all is done, select power off in recovery menu.
8. Now you have root, but you cant boot to system. You need to get to APX mode again and run "403 recovery.bat", follow same steps as with "cwm.bat".
9. reboot and you should now have rooted TPT.
Hope this help, Im not so good at giving instructions .
I lost my root after the official firmaware upgrade now i cannot root it . Please help I have tried everything in XDA please help..... frustrated as hell
bennatpjose said:
I lost my root after the official firmaware upgrade now i cannot root it . Please help I have tried everything in XDA please help..... frustrated as hell
Click to expand...
Click to collapse
have you tried to flash a pre-rooted JB?
Sabyn said:
have you tried to flash a pre-rooted JB?
Click to expand...
Click to collapse
is there a guide somewhere
bennatpjose said:
is there a guide somewhere
Click to expand...
Click to collapse
to flash a version of JB? come on my page , i can give you a link to my dropbox , there is anything you need
bennatpjose said:
is there a guide somewhere
Click to expand...
Click to collapse
i also have an e617g on 4.1.2 bell network id like to root and unlock the bootloader so i can install cwm and finally swap roms, this is a nice phone but it barely exists on the web any help would be greatly appreciated, thanks in advance
Never mind figured it out myself. I may post a guide here soon. Seeing as any help I ask for is ignored. I'd rather help than hold back
Turn your lG-e617g into an LG-e610 then root it and install cyanogenmod.
bennatpjose said:
is there a guide somewhere
Click to expand...
Click to collapse
this is my first tutorial so message me if something on here isnt clear.
step 1: download things, this is crucial, you need to download this stuff, it took me a while to find everything that ACTUALLY WORKED so i have it all in a nice little package to download.
step 2: make sure your phone is NOT plugged in the computer, install drivers if you do not have them. i have the drivers that worked for me in the package via direct download links. if they dont work for you somethings screwy with your computer and youll have to scour the internet to find drivers that'll work, google is your friend.
step 3: make sure your phone is recognised with your lappytop or computer. thats right i said lappytop, so sue me.
step 4nce all the drivers are installed and your phone is connected to the computer youll want to open up the folder labled: "LG FlashTool and Accessories" inside youll find "KDZ_FW_UPD.exe" open that right up.
step 5: next youll see a modded lg tool made by some guy on the internet, im not sure who but he/she did a good job thanks man/wo-man!!
ok youll want to leave all settings to default dont touch any thing, its good to go as is.
step 6: make sure phone is plugged in and usb debugging is enabled, use the kdz updater to browse for this file (download it via links in the package) "V10D_downgrade.kdz" then click on "Launch software update" this takes a while go make a coffee.
step 7: when its done its magic, your phone will boot up and youll see the LG logo for about 10 minutes any longer and your in a boot loop remove battery put it back in and hold both volume buttons down and power at the same time. time it carefully the lights on the soft keys will come on and a split second later the phone will slightly vibrate, the second you feel that press the home and hold it for about 10 seconds and the phone will do a hard reset, the phone will turn on now and initiate the first time use wizard, its in russian at first so just change your language to whatever, assuming english here. the phones software is now rooted just no su/superuser installed download from play store and update binary in settings of su app.
step 8: Unlocking bootloader time! after you flashed the software using kdz updater your phones ID is now technically an e610 now instead of an e617g, so unlocking the bootloader is now possible, connect your phone to computer, turn usb debugging on and drag and drop "emmc_appsboot.bin" into the root of your INTERNAL SD, also kill 2 birds with one stone here by also copying the recovery-clockwork-6.0.2.8-e610.img you downloaded via links in the txt document to the same place just rename it "recovery.img to make it easier also make sure you place the cm rom in the external sd. we need the bootloader unlocked to allow for cwm installation and good ol' rom swapping, open the folder "ADB" hold shift right click any where in the folder and select open "command window here",
type in the cmd window obviously without quotations: "adb shell" hit enter, then type "su" enter again then type "dd if=/sdcard/emmc_appsboot.bin of=/dev/block/mmcblk0p5" your bootloader is now unlocked, now type in "dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p17" this just installed clockwork mod. to boot into recovery and install cyanogen (the one im using. btw its a powerhouse compared to stock!!!) type in "reboot recovery"
step 9: factory reset, clear partition, wipe dalvik cache, install cyanogen, reboot, ENJOY.
seems i cant upload the programs needed so all i can do is this:
http://199.91.154.133/15ihz730pw2g/qwyqbfcp9fe7uhu/cm-10.1-20130725-UNOFFICIAL-e610.zip
this is the cyanogenmod rom.
http://199.91.154.102/r595o5bou5eg/bb2s0ohuj3jnflo/V10D_downgrade.kdz
this is the pre-rooted rom that allows su access to unlock bootloader this also
changes the phones id from e617g to e610, startup wizard is in russian at first simply change to english.
http://csmgdl.lgmobile.com/swdata/c...981MAN38AP22_ML_WHQL_Ver_3.8.1(0)_4.9.8.1.zip
this contains the correct drivers for phone.
http://dl.xda-developers.com/attach...65/51fc133a/1/7/5/6/7/5/9/CWM6_24-03-2013.rar
this is recovery image for cwm
and youll have to google search everything i quoted thats missing sorry about this but you need: 1) LG FlashTool and Accessories.
2) some form of adb for an adb shell.
3)emmc_appsboot.bin specifically for e610
4)lg drivers for e610/e617g
5)recovery.img for clockwork for e610
6)lastly the V10D_downgrade.kdz
I had already tried that but i keep getting the bloody error in KDZ
03:58:19 : Launching SW update
03:58:19 : Unpacking KDZ
03:58:21 : KDZ file extraced
03:58:21 : Extract file error
03:58:23 : ===FINISHED===
r4nd0m14m said:
this is my first tutorial so message me if something on here isnt clear.
step 1: download things, this is crucial, you need to download this stuff, it took me a while to find everything that ACTUALLY WORKED so i have it all in a nice little package to download.
step 2: make sure your phone is NOT plugged in the computer, install drivers if you do not have them. i have the drivers that worked for me in the package via direct download links. if they dont work for you somethings screwy with your computer and youll have to scour the internet to find drivers that'll work, google is your friend.
step 3: make sure your phone is recognised with your lappytop or computer. thats right i said lappytop, so sue me.
step 4nce all the drivers are installed and your phone is connected to the computer youll want to open up the folder labled: "LG FlashTool and Accessories" inside youll find "KDZ_FW_UPD.exe" open that right up.
step 5: next youll see a modded lg tool made by some guy on the internet, im not sure who but he/she did a good job thanks man/wo-man!!
ok youll want to leave all settings to default dont touch any thing, its good to go as is.
step 6: make sure phone is plugged in and usb debugging is enabled, use the kdz updater to browse for this file (download it via links in the package) "V10D_downgrade.kdz" then click on "Launch software update" this takes a while go make a coffee.
step 7: when its done its magic, your phone will boot up and youll see the LG logo for about 10 minutes any longer and your in a boot loop remove battery put it back in and hold both volume buttons down and power at the same time. time it carefully the lights on the soft keys will come on and a split second later the phone will slightly vibrate, the second you feel that press the home and hold it for about 10 seconds and the phone will do a hard reset, the phone will turn on now and initiate the first time use wizard, its in russian at first so just change your language to whatever, assuming english here. the phones software is now rooted just no su/superuser installed download from play store and update binary in settings of su app.
step 8: Unlocking bootloader time! after you flashed the software using kdz updater your phones ID is now technically an e610 now instead of an e617g, so unlocking the bootloader is now possible, connect your phone to computer, turn usb debugging on and drag and drop "emmc_appsboot.bin" into the root of your INTERNAL SD, also kill 2 birds with one stone here by also copying the recovery-clockwork-6.0.2.8-e610.img you downloaded via links in the txt document to the same place just rename it "recovery.img to make it easier also make sure you place the cm rom in the external sd. we need the bootloader unlocked to allow for cwm installation and good ol' rom swapping, open the folder "ADB" hold shift right click any where in the folder and select open "command window here",
type in the cmd window obviously without quotations: "adb shell" hit enter, then type "su" enter again then type "dd if=/sdcard/emmc_appsboot.bin of=/dev/block/mmcblk0p5" your bootloader is now unlocked, now type in "dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p17" this just installed clockwork mod. to boot into recovery and install cyanogen (the one im using. btw its a powerhouse compared to stock!!!) type in "reboot recovery"
step 9: factory reset, clear partition, wipe dalvik cache, install cyanogen, reboot, ENJOY.
seems i cant upload the programs needed so all i can do is this:
http://199.91.154.133/15ihz730pw2g/qwyqbfcp9fe7uhu/cm-10.1-20130725-UNOFFICIAL-e610.zip
this is the cyanogenmod rom.
http://199.91.154.102/r595o5bou5eg/bb2s0ohuj3jnflo/V10D_downgrade.kdz
this is the pre-rooted rom that allows su access to unlock bootloader this also
changes the phones id from e617g to e610, startup wizard is in russian at first simply change to english.
http://csmgdl.lgmobile.com/swdata/c...981MAN38AP22_ML_WHQL_Ver_3.8.1(0)_4.9.8.1.zip
this contains the correct drivers for phone.
http://dl.xda-developers.com/attach...65/51fc133a/1/7/5/6/7/5/9/CWM6_24-03-2013.rar
this is recovery image for cwm
and youll have to google search everything i quoted thats missing sorry about this but you need: 1) LG FlashTool and Accessories.
2) some form of adb for an adb shell.
3)emmc_appsboot.bin specifically for e610
4)lg drivers for e610/e617g
5)recovery.img for clockwork for e610
6)lastly the V10D_downgrade.kdz
Click to expand...
Click to collapse
That happens when the kdz file is corrupted. Redownload the firmware and try again
its more than likely a bad connection causing a bad download also are you starting off with an e617g or e610?
Will all app data, contacts, etc. be lost using this method? Thanks in advance!
r4nd0m14m said:
this is my first tutorial so message me if something on here isnt clear.
step 1: download things, this is crucial, you need to download this stuff, it took me a while to find everything that ACTUALLY WORKED so i have it all in a nice little package to download.
step 2: make sure your phone is NOT plugged in the computer, install drivers if you do not have them. i have the drivers that worked for me in the package via direct download links. if they dont work for you somethings screwy with your computer and youll have to scour the internet to find drivers that'll work, google is your friend.
step 3: make sure your phone is recognised with your lappytop or computer. thats right i said lappytop, so sue me.
step 4nce all the drivers are installed and your phone is connected to the computer youll want to open up the folder labled: "LG FlashTool and Accessories" inside youll find "KDZ_FW_UPD.exe" open that right up.
step 5: next youll see a modded lg tool made by some guy on the internet, im not sure who but he/she did a good job thanks man/wo-man!!
ok youll want to leave all settings to default dont touch any thing, its good to go as is.
step 6: make sure phone is plugged in and usb debugging is enabled, use the kdz updater to browse for this file (download it via links in the package) "V10D_downgrade.kdz" then click on "Launch software update" this takes a while go make a coffee.
step 7: when its done its magic, your phone will boot up and youll see the LG logo for about 10 minutes any longer and your in a boot loop remove battery put it back in and hold both volume buttons down and power at the same time. time it carefully the lights on the soft keys will come on and a split second later the phone will slightly vibrate, the second you feel that press the home and hold it for about 10 seconds and the phone will do a hard reset, the phone will turn on now and initiate the first time use wizard, its in russian at first so just change your language to whatever, assuming english here. the phones software is now rooted just no su/superuser installed download from play store and update binary in settings of su app.
step 8: Unlocking bootloader time! after you flashed the software using kdz updater your phones ID is now technically an e610 now instead of an e617g, so unlocking the bootloader is now possible, connect your phone to computer, turn usb debugging on and drag and drop "emmc_appsboot.bin" into the root of your INTERNAL SD, also kill 2 birds with one stone here by also copying the recovery-clockwork-6.0.2.8-e610.img you downloaded via links in the txt document to the same place just rename it "recovery.img to make it easier also make sure you place the cm rom in the external sd. we need the bootloader unlocked to allow for cwm installation and good ol' rom swapping, open the folder "ADB" hold shift right click any where in the folder and select open "command window here",
type in the cmd window obviously without quotations: "adb shell" hit enter, then type "su" enter again then type "dd if=/sdcard/emmc_appsboot.bin of=/dev/block/mmcblk0p5" your bootloader is now unlocked, now type in "dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p17" this just installed clockwork mod. to boot into recovery and install cyanogen (the one im using. btw its a powerhouse compared to stock!!!) type in "reboot recovery"
step 9: factory reset, clear partition, wipe dalvik cache, install cyanogen, reboot, ENJOY.
seems i cant upload the programs needed so all i can do is this:
http://199.91.154.133/15ihz730pw2g/qwyqbfcp9fe7uhu/cm-10.1-20130725-UNOFFICIAL-e610.zip
this is the cyanogenmod rom.
http://199.91.154.102/r595o5bou5eg/bb2s0ohuj3jnflo/V10D_downgrade.kdz
this is the pre-rooted rom that allows su access to unlock bootloader this also
changes the phones id from e617g to e610, startup wizard is in russian at first simply change to english.
http://csmgdl.lgmobile.com/swdata/c...981MAN38AP22_ML_WHQL_Ver_3.8.1(0)_4.9.8.1.zip
this contains the correct drivers for phone.
http://dl.xda-developers.com/attach...65/51fc133a/1/7/5/6/7/5/9/CWM6_24-03-2013.rar
this is recovery image for cwm
and youll have to google search everything i quoted thats missing sorry about this but you need: 1) LG FlashTool and Accessories.
2) some form of adb for an adb shell.
3)emmc_appsboot.bin specifically for e610
4)lg drivers for e610/e617g
5)recovery.img for clockwork for e610
6)lastly the V10D_downgrade.kdz
Click to expand...
Click to collapse
yes definitely back up
r4nd0m14m said:
yes definitely back up
Click to expand...
Click to collapse
Does this method actually unlock the network too? Can I use fido sim card? would it work?