Hi everyone,
I have a Galaxy Tab SIMlocked to Orange Spain. I tried to SIM Unlock it following the instructions at www[dot]galaxytabnews[dot]com/news/sim-unlock-galaxy-tab
I had to run the commands by hand because I'm on a Mac so I can't run .bat files, however, I was extra careful to go through all the commands.
I'm stuck in the recovery screen. If I select "reboot system now", I just get the Android with the warning sign. If I powercycle by long-pressing the power button and turning it on again, it goes back into Recovery. And if I do an adb shell and try to do an su (to recover the files) I get a Permission denied message.
Any ideas?
Thanks in advance!
adb reboot fixed it!
mcamou said:
I'm stuck in the recovery screen. If I select "reboot system now"
I just get the Android with the warning sign.
Click to expand...
Click to collapse
With the stock 3e recovery, you have to use the "Home" capacitive button, right ? (unlike other recovery mods that rely on the Power button) I noticed that activating a menu entry requires more than one press, and if I wait for too long the system returns to the root menu. I had the same "problem" today, recovery modes are sometimes just not very intuitive.
When I hit the Home button the menu disappeared and the Android with the Warning sign in the background came up to full brightness, but nothing else happened.
In the end I tried doing an "adb reboot" and that fixed the problem. Talk about missing the obvious! BTW the instructions in the article worked great, my Tab is now SIM Unlocked (at least as far as *#7465625# goes, I haven't yet had a chance to plug in another SIM)
After unlocking the N 10 and pressing start it is stuck on the "cross".
I go back to the bootloader and I see the following message :
" downloading - do not turn off the target" either connected or disconnected from the pc.
In this case there is no up or down arrows the only choice is "start"
From here to go back to the bootloader without the message I have to press power and both volume.
Then I can select recovery. Once in recovery I cannot get into the recovery menu no matter the way I press power and volume.
If I leave the N 10 on recovery after a while it goes back to the screen with the "cross".
Of course in this configuration I cannot access adb and fastboot.
I would really appreciate the help of the forum members.
gunner1937 said:
After unlocking the N 10 and pressing start it is stuck on the "cross".
I go back to the bootloader and I see the following message :
" downloading - do not turn off the target" either connected or disconnected from the pc.
In this case there is no up or down arrows the only choice is "start"
From here to go back to the bootloader without the message I have to press power and both volume.
Then I can select recovery. Once in recovery I cannot get into the recovery menu no matter the way I press power and volume.
If I leave the N 10 on recovery after a while it goes back to the screen with the "cross".
Of course in this configuration I cannot access adb and fastboot.
I would really appreciate the help of the forum members.
Click to expand...
Click to collapse
You're in a bootloop. While in recovery (without options) you need to press all 3 buttons on top at the same time. Don't hold them, just press them and release. Once or twice should be enough to pull up the recovery options. Once there, do a factory reset and you'll be all set.
Mine got pretty hosed when unlocking too. Couldn't even get into recovery. Had to use fastboot to flash recovery.img, then I could get into recovery and do a factory reset.
Sent from my Nexus 10 using XDA Premium HD app
Blueback22 said:
You're in a bootloop. While in recovery (without options) you need to press all 3 buttons on top at the same time. Don't hold them, just press them and release. Once or twice should be enough to pull up the recovery options. Once there, do a factory reset and you'll be all set.
Click to expand...
Click to collapse
Thank you very much (I also press the right button).
At first I wanted to reply that even this option did not work though I tried it more than once. Instead of replying to your post I decided to give a final try and it worked. In my previous attempts I was obviously taking a nap on the 3 buttons.
Hello everybody (please apologize for my bad english...)
I tried to hard reset my HD Mini which was running Android and now it won't boot up, the phone's displaying some error messages (in green, black screen)
here's the message:
nand id: 0x5500bcec maker=0xec device=0xbc
press VOLUME UP for RECOVERY
press VOLUME DOWN for FASTBOOT
flash_read_image: failed (319 errors)
ERROR: Cannot read recovery_header
flash_read_image: failed (3136 errors)
ERROR: Cannot read kernel image
ERROR: Could not do normal boot. Reverting to fastboot mode.
ENTERING FASTBOOT MODE
udc_start()
Here's what happens when I power the phone holdind Volume - :
PB92100
SPL-1.07.0000
ENGID 0xF
PCBID 0x80
MicroP(LED) 0x05
TP SNAPTICS
Please, could anyone help me to solve the above? has anyone experienced this?
Thank you
First of all, do you want android or Windows?
for android, when you see "ENTERING FASTBOOT MODE" then you can reinstall the Recovery and go!
Thanks for replying.
I just want my phone work again, so either Windows or Android...
But with android, i already intalled LK Boot (the message appears in blue now) then i installed the recovery from SC Dard but when the phone boots, it's only showing the black screen with message (in blue). With windows I stuck with the ''Invalid vendor ID'' while installing with RUU (I can't determinate my Vendor ID). So please help
Regards
esQmo said:
Thanks for replying.
I just want my phone work again, so either Windows or Android...
But with android, i already intalled LK Boot (the message appears in blue now) then i installed the recovery from SC Dard but when the phone boots, it's only showing the black screen with message (in blue). With windows I stuck with the ''Invalid vendor ID'' while installing with RUU (I can't determinate my Vendor ID). So please help
Regards
Click to expand...
Click to collapse
You had Android before as you said, so you can come back to android easily. just be really sure you have reinstalled the Recovery correctly! (Even this happened to me, but at last you will Pass!)
have you tried to manually enter recovery by VolumeUp?
Please tell us the ROM you want to use.
I can't enter recovery manually, only with PC (with CWM LK Boot Recovery's update.bat file). when i power on the phone holding volume up, the phone displays this message (in blue = meaning that the LK Boot is installed):
nand id: 0x5500bcec maker=0xec device=0xbc
press VOLUME UP for RECOVERY
press VOLUME DOWN for FASTBOOT
flash_read_image: failed (319 errors)
ERROR: Cannot read recovery_header
flash_read_image: failed (3136 errors)
ERROR: Cannot read kernel image
ERROR: Could not do normal boot. Reverting to fastboot mode.
ENTERING FASTBOOT MODE
udc_start()
The rom i installed is Phonerty-MIUIv4-2.10.26
Thank again for replying
PS: this is what happens when i power phone holding Volume + :
nand id: 0x5500bcec maker=0xec device=0xbc
press VOLUME UP for RECOVERY
press VOLUME DOWN for FASTBOOT
ENTERING FASTBOOT MODE
udc_start()
Good,
When you can't enter Recovery manually (Volume Up), means either it hasn't been installed correctly or you button is damaged. Yes LK Boot is installed (the blue texts) but the Recovery (graphic interface) seems hasn't been installed.
if you can enter Recovery by PC, why not format and install ROM there (don't restart)? you may pass anyway!
and the last thing, did you hold both Power and Volume up? you should just power then release it, but hold Volume UP, what we see in the text you showed us, the phone hasn't detect the pressed Volume Up.
Have a nice try!
iPlasm said:
Good,
When you can't enter Recovery manually (Volume Up), means either it hasn't been installed correctly or you button is damaged. Yes LK Boot is installed (the blue texts) but the Recovery (graphic interface) seems hasn't been installed.
if you can enter Recovery by PC, why not format and install ROM there (don't restart)? you may pass anyway!
and the last thing, did you hold both Power and Volume up? you should just power then release it, but hold Volume UP, what we see in the text you showed us, the phone hasn't detect the pressed Volume Up.
Have a nice try!
Click to expand...
Click to collapse
I've also formatted before i install the ROM but no succes...
I don't think there is a problem with the volume up button 'cause i use it in the recovery and when i press both volume buttons and power button it leads me to the WP reset option (factory resset) and i use the volume up button to confim the action (restoring).
And, is there a way in can check my Vendor ID? 'cause i would like to install WP but fastboot doesn't give me the CID, the command ''fastboot getvar CID'' returns ''CID: '' then nothing. I'm so desesperate...
BR.
Going Back to WM you should have the right ROM, or contact HTC for the right one, read this http://forum.xda-developers.com/showpost.php?p=21617447&postcount=2
And at last, what OS you want to be installed on your phone?
either Android or WP
but android would be better
esQmo said:
either Android or WP
but android would be better
Click to expand...
Click to collapse
Alright then,
You said you can't enter Recovery by VolumeUp, right?
if right, connect USB to PC, Click on Update.bat, press number one, then number two, and restart phone (don't unplug phone), when entered fastboot, press number two again, you may now enter manually recovery. if you couldn't pass, press number two and on your phone you would see recovery interface, format and install the ROM, unplug USB and restart phone.....
Okay, will try. thanks again
iPlasm said:
Alright then,
You said you can't enter Recovery by VolumeUp, right?
if right, connect USB to PC, Click on Update.bat, press number one, then number two, and restart phone (don't unplug phone), when entered fastboot, press number two again, you may now enter manually recovery. if you couldn't pass, press number two and on your phone you would see recovery interface, format and install the ROM, unplug USB and restart phone.....
Click to expand...
Click to collapse
i see the recovery interface,,,,,,,the cmw... i can access the options using volume up and down button........ but when i select the option using power button the phone restarts......if i press and hold the power button the option is selected and next menu appears but as soon as i let go power button to select option , the phone again restarts....the main thing is that i cant go past the first menu......is my power button faulty???....or is there any other way to use cmw??......and can i install rom using that update.exe command menu??......please help me....
anshulonweb said:
i see the recovery interface,,,,,,,the cmw... i can access the options using volume up and down button........ but when i select the option using power button the phone restarts......if i press and hold the power button the option is selected and next menu appears but as soon as i let go power button to select option , the phone again restarts....the main thing is that i cant go past the first menu......is my power button faulty???....or is there any other way to use cmw??......and can i install rom using that update.exe command menu??......please help me....
Click to expand...
Click to collapse
There is nothing no need to press power!
only volume button, you saw the interface and you have to use the touch arrows to begin.
iPlasm said:
There is nothing no need to press power!
only volume button, you saw the interface and you have to use the touch arrows to begin.
Click to expand...
Click to collapse
i may sound like noob........but can you please tell me which arrows to touch....i navigate to install zip from sd option using volume keys ....now how do i select it to go to further 2nd menu....there are 4 on screen buttons......are you talking about those on screen arrows???....because i touch them and nothing happens(may be touch screen problem,i recently got it repaired).....is there any other way to install rom using pc???....
anshulonweb said:
i may sound like noob........but can you please tell me which arrows to touch....i navigate to install zip from sd option using volume keys ....now how do i select it to go to further 2nd menu....there are 4 on screen buttons......are you talking about those on screen arrows???....because i touch them and nothing happens(may be touch screen problem,i recently got it repaired).....is there any other way to install rom using pc???....
Click to expand...
Click to collapse
yeah I mean those 4 arrow buttons which you should touch them. if you touch the arrow, the selection above will move. And there is no need to move by using Volume keys in Recovery.
using PC, it should be possible through terminal ADB, which are some codes for connection. but I don't support this way.
I recommended that you do it by using touch, if the four arrow touch doesn't work, then how can you use it with Android? especially the Phone app is in the four arrow button direction.
iPlasm said:
yeah I mean those 4 arrow buttons which you should touch them. if you touch the arrow, the selection above will move. And there is no need to move by using Volume keys in Recovery.
using PC, it should be possible through terminal ADB, which are some codes for connection. but I don't support this way.
I recommended that you do it by using touch, if the four arrow touch doesn't work, then how can you use it with Android? especially the Phone app is in the four arrow button direction.
Click to expand...
Click to collapse
well my touch is not working then because i press the arrows and nothing happen....... the problem is that even if i get my touch repaired again there is no way of knowing if it is working unless i come home and install recovery again and check it by pressing arrows.... i only see blue screen now...
can you please tell me how to install rom through adb.....i can take the risk.....please i will be very thankful.....once i install rom, i can get my phone repaired because i can show the person that touch is not working and he will repair it.... please help me....
anshulonweb said:
well my touch is not working then because i press the arrows and nothing happen....... the problem is that even if i get my touch repaired again there is no way of knowing if it is working unless i come home and install recovery again and check it by pressing arrows.... i only see blue screen now...
can you please tell me how to install rom through adb.....i can take the risk.....please i will be very thankful.....once i install rom, i can get my phone repaired because i can show the person that touch is not working and he will repair it.... please help me....
Click to expand...
Click to collapse
You should follow a guide, search for (Install ROM through adb, install ROM without SDCARD, install ROM via adb)
Anyway, I found this guide may help you: http://forum.xda-developers.com/showthread.php?t=911228
Remember to enter recovery as you did it (Volume + up), So follow the link above at your risk, you may skip the Wipe/format step.
iPlasm said:
You should follow a guide, search for (Install ROM through adb, install ROM without SDCARD, install ROM via adb)
Anyway, I found this guide may help you: http://forum.xda-developers.com/showthread.php?t=911228
Remember to enter recovery as you did it (Volume + up), So follow the link above at your risk, you may skip the Wipe/format step.
Click to expand...
Click to collapse
thanks for your help man.....:good:
I've encountered the following problem with my Galaxy Note 4: I just bought it online from a guy who turned out to be a fraud and I was not able to find or contact him again via the internet market place. So that was really stupid of me...and expensive...and I regret it very much and with hind site I should have picked up the signs but...o well you got the picture...I got ripped.
Anyways after careful inspection it turned out to be a real genuine Note 4 N910F with 64 Gb but with a korean or chinese or something recovery mode (I saw it once when I got home), an imei not to be found on any stolen phone list and working correctly with an european rom that includes English and Dutch at that point.
That's when I decided to factory reset it and then I got into trouble again: For some reason it got stuck in a boot loop with just a No Command message. Normally you can reach the recovery mode by pressing Volume Up +Home +Power but now nothing happens. It's not a real brick but with just the No Command message and no access to the recovery mode I don't know how to fix this.
Can anyone help me with a clue on how to get out of a No Command loop without recovery mode? Or how to get into recovery mode if start with Key Up etc does not work? Or any other clue that could help me?
Thanks in advance!
Kind regards,
Rene (aka the guy who got ripped off but hopes to save the phone)
Can you get into download mode?
Thanks dr.mOx for responding!
I tried both volume up+home+power to get into recovery mode and also volume down+home+power to get into download mode but in both cases the device starts and shows me the android robot on it's back with a red warning triangle containing an exclamation mark and below the robot the message "No command." . The screen blinks every two or three seconds. The power button is not shutting the phone down in this state. I have to remove the battery to retry.
Battey out. Then in. Go to download mode. Flash stock rom with odin
Sent from my SM-N910F using XDA Premium 4 mobile app
Hi Ozzyblack. The thing is that, if I'm correct, when I press volume down+home+power to get into download mode I expect some sort of menu to appear asking to go into download mode or not. Am I correct? I saw same sceendump about that. And now I keep getting the No Command window. Do you think I miss something here? I do press volume down first, then home (keeping volume down pressed), and them the power button (keeping all buttons pressed). After a few seconds the display turns a bit more grey for a sec and then the android robot appears. But no message of sorts about getting into download mode.
Hi reborn67.
**Only if you have a galaxy note 4 N910F model**
If you can get into download mode your safe, and you can reflash an offical ROM, there is no menu system in Download mode so don't worry.
Don't stay in download mode forever or a long time, i.e. power off and wait till you have the ROM and Odin before you go into download mode as it sometimes times out even though it still shows in download mode.
Go to here http://samsung-updates.com/details/37086/Galaxy_Note_4_Snapdragon/SM-N910F/DBT/N910FXXU1ANK4.html download the ROM, and then download Odin here https://mega.co.nz/#!UdRRyCAT!H4FyVxYynNWvXqRNmnpMGQRCP-dG3uykgP2pT4rh8Ek
These are the instructions from sammobile on how to flash ROm with Odin.Instructions
1-Extract (unzip) the firmware file
2-Download Odin v3.09
3-Extract Odin zip-file
4-Open Odin v3.09 (make sure the extracted rom file "N910FXXU1ANK4_N910FOXA1ANK4_N910FXXU1ANK4_HOME.tar.md5" is in the same folder as Odin before opening up Odin.
5-Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6-Connect phone and wait until you get a blue/orange sign in Odin (above text top left ID:COM)
7-Add the firmware file to AP / PDA
IMPORTANT** Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
I always do a hard reset after flashing new ROM's (settings, backup and reset, factory data reset)
I have a network locked UK N910F on EE and use this German ROM with no problems, this ROM has little bloatware.
Thanks gadjet. I do have odin and a stock rom ready for use now:
1-I tested odin and the usb port plus driver setup with my 'old' galaxy s4 and within a second the ID:Com in Odin turns blue. So that seems to be working fine.
2-So now I put in the Note 4 battery and connect to usb WITHOUT ANY KEYS PRESSED...just to test! And the usb connection bleeps from windows confirm a device is connected...so far so good.
3-Last and most important step fails: Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons), the 'no command' robot is still there, and also connect phone and wait until you get a blue/orange sign in Odin (above text top left ID:COM) never happens. And also there are no windows usb connection bleeps so apparently there's a difference when I tried to select download mode.
Please know that I'm really thankful for all the great tips. But I guess I'm still missing something here.
Kind regards,
Rene
Can you try this,.
1-press and hold Home + Power + Volume up buttons
Do you get a menu?
gadjet said:
Can you try this,.
1-press and hold Home + Power + Volume up buttons
Do you get a menu?
Click to expand...
Click to collapse
Tried it. I do not get a menu. Just the No command robot.
reborn67 said:
Tried it. I do not get a menu. Just the No command robot.
Click to expand...
Click to collapse
OK next.
1-press and hold Home + Power + Volume Down buttons, now open up samsung kies and see if it repairs your note 4
gadjet said:
OK next.
1-press and hold Home + Power + Volume Down buttons, now open up samsung kies and see if it repairs your note 4
Click to expand...
Click to collapse
Unfortunately Kies 3 (latest update) does not recognize any connected device when I try this. The No command screen is laughing at us again
This is different
Turn your phone off or make sure it’s turned off.
Press and hold the Volume Up, Home and Power buttons simultaneously.
When the phone vibrates, release the Home and Power buttons, but keep pressing Volume Up button.
gadjet said:
This is different
Turn your phone off or make sure it’s turned off.
Press and hold the Volume Up, Home and Power buttons simultaneously.
When the phone vibrates, release the Home and Power buttons, but keep pressing Volume Up button.
Click to expand...
Click to collapse
There's no vibration...just the No command window.
OK, corrupt boat-loader Samsung service centre repair job, or local phone repair job.
Requires boot chip to be reflashed at board level.
Sorry we couldn't get you going bud..:crying:
Thanks for trying guys!
I'll see if I can find a local phone repair store.
I used to have the same problem with my SM-P605 when I flashed some ROM in the summer, the only special thing I did was not giving up and after all I got to the Download mode. Hope it'll work for you without Service.
Good Luck
Today I went to visit an official Samsung store. They told me I bought a very good but fake Note 4 and it is not likely it can be recovered. The weight is incorrect...a bit to heavy. Also the serial numbers are unknown in the samsung database and some other details were not correct. Thanks again for trying to help me! I now officially have a really expensive brick that looks like a note 4.:crying:
same issue i am facing..i tried all..but it shows no command error and no menu shows up
ill be going to get my phone checked today..if i get any way out ill let u know
What you did later to recover ? I'm facing the same problem I've visited samsung service centre but they are unable to solve it.
Can you guys help me for my phone Samsung note 4 because its just keep repeating in a logo SAMSUNG...
I tried pressing volume down+home button+power then got "WARNING CUSTOM OS... and stuff and then I press volume high+home button+power then I got the logo SAMSUNG that keeps on repeating. Please help me what to do
Hi,
Out of nowhere my nexus 10 is in april bootloop. At the Google logo it restarts, so after about 5 seconds. I've tries power button + volume down, this results in the screen with android bot on back, text below: Downloading, do not power off. This is not the screen with a red exclamation Mark. I cannot get to this screen.
Then after 2 seconds in the screen, it reboot again. The buttons do not work in this screen.
The computer does not detect the tablet (because it keeps rebooting probably.
Thnx in advance for advice
Put your device in Bootloadermode by pressing all the buttons. An android without text should be in the middle. (if u wanna boot in recovery push volum up or down to navigate and with the power button you do what is written on the left side like"start" or "recovery" etc.)
For resetting it to Stock rom just follow this guide
u will need to download "Nexus Root Toolkit" for this Guide
1.Put your device in bootloader like mentioned befor but dont start anything just let it be. Plug the tablet in.
2. Open"Nexus Root Toolkit"
3. Open it up and then select "Softbricked/Bootloop" then klick on "Flash stock + Unroot"
4.If it says that your device isnt unlocked or u noticed that the Lock state of the device is on Locked then u can unlock it with the "unlock bootloader" option and then repeat step 3.
5. Follow the setup on the screen and then you are good to go.