Related
I flashed my phone to JF 1.5 and in the process some how managed to screw up my sd card and lost all my apps. i did do a nandroid backup of jf 1.41 so i ahve those img files. I tried to restore to that to recover everything but it wont boot past the g1 logo. I tried downgrading firmware to 1.43 (couldnt find 1.41) and using the same restore for nandroid and still wouldnt boot. I also tried jsut applying the user data img to see if i could jsut grab that and it fialed on both firmware revisions 1.5 , 1.43.
In the end im stuck with a backup i cant use, the only thing i need off of it is the apps. I read that you can use the emulator to mount it but i couldnt figure that out. I also looked at yaffs extractor from the google code site but i wasnt quite sure how to compile/run it.
Anyone have a simple solution or a complex one i can follow to getting my apps out?
did you follow this?
http://forum.xda-developers.com/showpost.php?p=3311708&postcount=2
darkrangr said:
I also looked at yaffs extractor from the google code site but i wasnt quite sure how to compile/run it.
Click to expand...
Click to collapse
You go into the source directory, type "gcc -o unyaffs unyaffs.c", then you (create and) go to some directory where you want to extract the contents ("mkdir ~/extract") "cd ~/extract", and finally you extract the image "/path/to/unyaffs /path/to/data.img".
I tried the standard nandroid restore and it failed.
Trying the yaffs thing now and i got an error.
I placed the yaffs files all in a folder on the sdcard and put the img in that folder as well.
I open the terminal on the phone and did cd /sdcard/nan nan being the directory i made
I then tried to run that command "gcc -o unyaffs unyaffs.c" and i get gcc not found. what did i do wrong?
Unless your backup was corrupted, flashing the backup should have been fine.
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata data.img
You said it failed - what error did it give? Did it say it couldn't find the command? Be sure you're running these commands on your PC with your G1 connected via USB, the correct drivers are loaded, and you have the fastboot program.
As for using unyaffs - I don't think you understand what you have to do to use it. You have to compile it on your PC...all you get is the source code. I haven't looked on the google code site, but I would imagine there isn't a version for windows.
EDIT: After reading your original post for a second time, I have to ask: if you screwed up your SD card and lost all of your apps, does that mean you were using Apps2SD? That's a bit of an important detail to leave out, if so. Unless I'm mistaken (and someone correct me if I'm wrong), your apps wouldn't be in the backup anyway, you're wasting your time. If your backup is just restoring the symlinks to the SD card and the SD card is screwed up, then no wonder it's hanging at boot. You'd need to wipe your SD card and start from scratch. I'd recommend doing that either way - would you rather have to redownload a few apps or continue having a bricked phone for days?
it didnt fail on the restore with fastboot, it loaded up everything fine and then when i rebooted it just sat on the boot screens forever and never loaded.
I am feeling nice so darkrangr if you want to PM your image files I will unyaffs it on my ubuntu box for you.
TemporalShadows said:
EDIT: After reading your original post for a second time, I have to ask: if you screwed up your SD card and lost all of your apps, does that mean you were using Apps2SD? That's a bit of an important detail to leave out, if so. Unless I'm mistaken (and someone correct me if I'm wrong), your apps wouldn't be in the backup anyway, you're wasting your time. If your backup is just restoring the symlinks to the SD card and the SD card is screwed up, then no wonder it's hanging at boot. You'd need to wipe your SD card and start from scratch. I'd recommend doing that either way - would you rather have to redownload a few apps or continue having a bricked phone for days?
Click to expand...
Click to collapse
no, my apps were installed normally. I am running curent jf firmwar enow while i try to get my stuff back, but some of the apps i had are no longer available or have converted to pay apps, plus i forgot a lot of apps i had.
http://forum.xda-developers.com/showthread.php?t=497034
In the other tools archive on this post you can find the unyaffs tool fully compiled. Just move your image to the same folder, drag and drop it on the unyaffs.exe and watch the files appear.
How about YOU DIDN'T INSTALL GCC!!!
darkrangr said:
I tried the standard nandroid restore and it failed.
Trying the yaffs thing now and i got an error.
I placed the yaffs files all in a folder on the sdcard and put the img in that folder as well.
I open the terminal on the phone and did cd /sdcard/nan nan being the directory i made
I then tried to run that command "gcc -o unyaffs unyaffs.c" and i get gcc not found. what did i do wrong?
Click to expand...
Click to collapse
Hi everyone, this is my first thread
I recently rooted my 16gb WiFi only nexus 7. After installing 3 different roms (touchwiz, cyanogenmod 10, and xenon HD) I didn't like touch wiz or cyanogenmod, and I'm currently running xenon HD. However, when I opened my storage today, of said I had 3.6gb remaining. I thought it may have been all the apps, so I factory reset it, reset the partition, and deleted all data via recovery mode. That gave me about 1 more gigabyte. I opened ES file explorer and deleted everything there. I still have only 4.6 gigabytes usable. Anyone else have this issue?
Thanks
Sent from my Nexus 7 using xda app-developers app
Well, I deleted some old backups and now I have 7.5 gb of storage, which should do for now. But I still have that 6 GB leftover, anyone know whats wrong?
Thanks
Sent from my Nexus 7 using xda app-developers app
OK. Now I mucked around in the mounting/unmounting stuff, and now it won't boot. It's stuck at the Google screen. Someone help please???
Sent from my Nexus 7 using xda app-developers app[/QUOTE]
You are not the only person who has experienced this.
Bottom line is you need to rebuild the /data filesystem, which necessitates getting everything off of it including any nandroid backups plus anything worth saving in /sdcard
Either the "format data" option in TWRP, or using fastboot.
Code:
fastboot erase userdata
fastboot format userdata
I've had the latter create short file systems - and also not create short file systems.
Whatever causes this it seems to depend on prior state in the filesystem, even though I don't think things should behave this way. I've also had TWRP's "Format data" menu option create new, empty, & corrupted ext4 file systems. Ugh - I hope your luck is better than mine.
Note that you can run "df -k /data" in the recovery (after you have created the new filesystem by either method) to find out how big it is; better to check things are OK right away, rather than after you've put effort into restoring things or flashing ROMs.
Long boring thread, but related.
http://forum.xda-developers.com/showthread.php?t=2184486
good luck
Edit: no point in restoring the wedged /data backup. I hope you have earlier backups.
bftb0 said:
You are not the only person who has experienced this.
Bottom line is you need to rebuild the /data filesystem, which necessitates getting everything off of it including any nandroid backups plus anything worth saving in /sdcard
Either the "format data" option in TWRP, or using fastboot.
Code:
fastboot erase userdata
fastboot format userdata
I've had the latter create short file systems - and also not create short file systems.
Whatever causes this it seems to depend on prior state in the filesystem, even though I don't think things should behave this way. I've also had TWRP's "Format data" menu option create new, empty, & corrupted ext4 file systems. Ugh - I hope your luck is better than mine.
Note that you can run "df -k /data" in the recovery (after you have created the new filesystem by either method) to find out how big it is; better to check things are OK right away, rather than after you've put effort into restoring things or flashing ROMs.
Long boring thread, but related.
http://forum.xda-developers.com/showthread.php?t=2184486
good luck
Edit: no point in restoring the wedged /data backup. I hope you have earlier backups.
Click to expand...
Click to collapse
I basically have nothing I need on my tablet, so I'm fine deleting everything on it, if that's what you mean. I'll try, but thanks:good:
nicetaco said:
I basically have nothing I need on my tablet, so I'm fine deleting everything on it, if that's what you mean. I'll try, but thanks:good:
Click to expand...
Click to collapse
Wait, is that for getting back the storage or actually letting it boot up? Because right now the storage is the least of my concerns.
What I described is for getting back lost space (by recreating from scratch the ext4 filesystem in the userdata partition).
As it doesn't touch either the boot partition or the system partition, your tablet should certainly be able to boot. If you don't do a restore of /data from a backup, the result will be like a factory reset of whatever rom you had on the tablet.
Just make sure to check the size of the data partition before you start re-customizing or restoring data from backups to make sure that you got the full size of the partition.
bftb0 said:
What I described is for getting back lost space (by recreating from scratch the ext4 filesystem in the userdata partition).
As it doesn't touch either the boot partition or the system partition, your tablet should certainly be able to boot. If you don't do a restore of /data from a backup, the result will be like a factory reset of whatever rom you had on the tablet.
Just make sure to check the size of the data partition before you start re-customizing or restoring data from backups to make sure that you got the full size of the partition.
Click to expand...
Click to collapse
Ughhh its still not turning on...
nicetaco said:
Ughhh its still not turning on...
Click to expand...
Click to collapse
Please re-read this quote from your 2nd thread in this fiasco.
Nico_60 said:
How do you want to know what's happening to your device if don't tell us which commands you have done exactly with fastboot and why ?
Click to expand...
Click to collapse
If you screwed around with your system partition and it wouldn't boot before, then with a freshly formated and empty /data filesystem, of course it still will not boot. The instructions I provided in this thread only involved the userdata partition!
But you didn't say "I did such and such and it still hangs during the initial boot phase where the X logo is flashing on the screen"; instead you said:
"Ughhh its still not turning on".
WTF? Has your problem now morphed into a dead battery problem, or is the language you are using just incredibly imprecise?
Anyway, Flash a new ROM using the custom recovery. Any ROM - you pick. Maybe not that Xenon ROM or whatever it is called. See if the new ROM boots. And then immediately after it boots, check to see what size the /data partition is.
And if you come back into this thread anymore please be specific about what you are attempting and exactly what symptoms you are observing.
good luck
bftb0 said:
Please re-read this quote from your 2nd thread in this fiasco.
If you screwed around with your system partition and it wouldn't boot before, then with a freshly formated and empty /data filesystem, of course it still will not boot. The instructions I provided in this thread only involved the userdata partition!
But you didn't say "I did such and such and it still hangs during the initial boot phase where the X logo is flashing on the screen"; instead you said:
"Ughhh its still not turning on".
WTF? Has your problem now morphed into a dead battery problem, or is the language you are using just incredibly imprecise?
Anyway, Flash a new ROM using the custom recovery. Any ROM - you pick. Maybe not that Xenon ROM or whatever it is called. See if the new ROM boots. And then immediately after it boots, check to see what size the /data partition is.
And if you come back into this thread anymore please be specific about what you are attempting and exactly what symptoms you are observing.
good luck
Click to expand...
Click to collapse
OK. I tried to install a new rom, but I can't because I have USB debugging off, which I can't turn on
bftb0 said:
You are not the only person who has experienced this.
Bottom line is you need to rebuild the /data filesystem, which necessitates getting everything off of it including any nandroid backups plus anything worth saving in /sdcard
Either the "format data" option in TWRP, or using fastboot.
Code:
fastboot erase userdata
fastboot format userdata
I've had the latter create short file systems - and also not create short file systems.
Whatever causes this it seems to depend on prior state in the filesystem, even though I don't think things should behave this way. I've also had TWRP's "Format data" menu option create new, empty, & corrupted ext4 file systems. Ugh - I hope your luck is better than mine.
Note that you can run "df -k /data" in the recovery (after you have created the new filesystem by either method) to find out how big it is; better to check things are OK right away, rather than after you've put effort into restoring things or flashing ROMs.
Long boring thread, but related.
http://forum.xda-developers.com/showthread.php?t=2184486
good luck
Edit: no point in restoring the wedged /data backup. I hope you have earlier backups.
Click to expand...
Click to collapse
Thank you, bftb0!
I was looking around for this after I discovered my lack of space. I read about it before, but couldn't dig up the post. Thanks for informing us! Enjoy the thanks!
nicetaco said:
OK. I tried to install a new rom, but I can't because I have USB debugging off, which I can't turn on
Click to expand...
Click to collapse
ADB is available in the custom recovery... so long as you have the right drivers installed on your PC. And that is NOT controlled by some setting in the most recent ROM that you flashed - it is always running in the custom recovery.
One of the quirks about ADB in the recovery with the Nexus7 is that it claims a different USB address than "ADB Composite Interface" that the regular OS does. This might mean that ADB works correctly with the regular OS booted, but not when the custom recovery is booted, depending on what drivers you have installed. Yes, you need yet another driver installed even though they are both "ADB" connections. But that is a Windows driver issue, not a problem with the N7.
You can also use an OTG cable and a USB drive with TWRP if that is easier. Put your ROM on the memory stick and then use TWRP's "external memory". To be most compatible, make sure the USB stick is formatted in a FAT format. (I don't know if TWRP can handle NTFS).
upichie said:
Thank you, bftb0!
I was looking around for this after I discovered my lack of space. I read about it before, but couldn't dig up the post. Thanks for informing us! Enjoy the thanks!
Click to expand...
Click to collapse
I wonder if I can I trade them in for some coupons or something
@bftb0, I was not able to use adb while in TWRP but i found THIS and it was the solution, what do you think about this "fix"?
bftb0 said:
ADB is available in the custom recovery... so long as you have the right drivers installed on your PC. And that is NOT controlled by some setting in the most recent ROM that you flashed - it is always running in the custom recovery.
One of the quirks about ADB in the recovery with the Nexus7 is that it claims a different USB address than "ADB Composite Interface" that the regular OS does. This might mean that ADB works correctly with the regular OS booted, but not when the custom recovery is booted, depending on what drivers you have installed. Yes, you need yet another driver installed even though they are both "ADB" connections. But that is a Windows driver issue, not a problem with the N7.
You can also use an OTG cable and a USB drive with TWRP if that is easier. Put your ROM on the memory stick and then use TWRP's "external memory". To be most compatible, make sure the USB stick is formatted in a FAT format. (I don't know if TWRP can handle NTFS).
I wonder if I can I trade them in for some coupons or something
Click to expand...
Click to collapse
Holy crap I forgot about the OTG cables. Thanks, I'll try it!
nicetaco said:
Holy crap I forgot about the OTG cables. Thanks, I'll try it!
Click to expand...
Click to collapse
Thank you so much. That did it.
First problem fixed through XDA developers
Enjoy my thanks
Nico_60 said:
@bftb0, I was not able to use adb while in TWRP but i found THIS and it was the solution, what do you think about this "fix"?
Click to expand...
Click to collapse
The ADB daemon - "adbd" is definitely sitting there running inside the custom recovery. Even if you can't communicate with it because of a lack of a driver, you should nevertheless be able to see it as an unknown device in the PC's device manager.
I have done the same hack - hand editing the .INF file - with both the Google SDK drivers and the Asus drivers, and in both cases it worked fine (one driver for everything: ADB in the OS, ADB in TWRP/CWM, and fastboot with the bootloader).
I have also used the Google SDK driver without modification plus the XDA Universal Naked driver. That means using the Google driver for fastboot and ADB when the OS is booted, and the XUN driver for custom recoveries only.
At the present time the ONLY driver I have installed is a hacked version of the Asus drivers.
Win 7 complains about signing when doing this (for the Asus drivers for sure, I can't remember if the Google driver is signed or not).
As I mentioned, Win 7 Pro x64. I suppose the whole "violated signing" might make life even more difficult with Win 8 though.
bftb0, did you personally experience the problem of losing space on the internal memory? I tried your advice, but it didn't work. I'm on PAC(man) ROM. I booted into TWRP, did the data wipe (not factory reset, the full wipe that wipes the everything) but I still only have 13 gb available (on my 32 gb Nexus 7). I rebooted into TWRP and did a factory reset AND wipe data, but I am still missing half of my internal memory.
Do you need to do this on the stock ROM for it to work? Any other tips would be greatly appreciated.
upichie said:
bftb0, did you personally experience the problem of losing space on the internal memory? I tried your advice, but it didn't work. I'm on PAC(man) ROM. I booted into TWRP, did the data wipe (not factory reset, the full wipe that wipes the everything) but I still only have 13 gb available (on my 32 gb Nexus 7). I rebooted into TWRP and did a factory reset AND wipe data, but I am still missing half of my internal memory.
Do you need to do this on the stock ROM for it to work? Any other tips would be greatly appreciated.
Click to expand...
Click to collapse
Yes, it really did happen to me.
After it happened I took the trouble to download 4 different versions of TWRP (2.4.1.0-2.4.4.0), and I re-created the ext4 filesystem with:
- each of the different versions of TWRP and
- fastboot format userdata
after each, I did a "e2fsck -f -n <block-device>" on the (unmounted) userdata partition to see that they were clean, and I also dumped the output of "tune2fs -l <block-device>" to a file for comparison. Other than things that I would expect to be different (e.g. partition UUID identifier strings and timestamps), I noticed no differences. And also, I couldn't reproduce the problem for the life of me.
Above you mention full "data wipe". In TWRP (v2.4.1.0), this is presented as a separate button in the "Wipe" sub-menu where it (the last button in the first column) is labeled "Format Data". I suppose this is what you mean, but thought I would be explicit to avoid any confusion. (The "factory reset" procedure in the two custom recoveries - both CWM and TWRP - can not possibly re-create the ext4 filesystem in /data, as the /data/media/0 SD card files are in there. But the "Format Data" button does destroy & recreate the whole filesystem).
If you press on this button and at the same time capture the output of the "ps" command, you will see that TWRP recovery invokes the /sbin/make_ext4fs in the following way
Code:
make_ext4fs -l -32768 /dev/block/mmcblk0p<PARTNUM>
(CWM probably uses a different external command as it does not seem to have a "make_ext4fs" command in it's ramdisk. Probably mke2fs with ext4 options on the command line)
Anyways, I can't say I have my finger on exactly how to resolve the problem as I can not re-created it. But it did happen to me.
One thing you can try rather than using TWRP's "make_ext4fs" command (underneath that button "Format Data") is to reboot into the bootloader from TWRP, and do the file system formatting in fastboot instead of TWRP, as in:
Code:
fastboot format userdata
(noobs: caution, this is a full userdata wipe)
and then bop back into the recovery and check things with "tune2fs" report
Code:
tune2fs -l /dev/block/mmcblk0p<PARTNUM>
My 32G N7 shows a total block count of 7503608 (x 4k/block = 29.3 GiB) doing this.
As I mentioned before, it's a good idea to check to see you have the right size before you start restoring stuff to avoid wasting time. You can do it above with "tune2fs -l", or because TWRP seems to want to mount /data and /sdcard when it boots, just run
adb shell df -k /data
to get a report of total and used size.
Sorry this isn't more definiitve. I would have spent more time looking at this, but it is tedious as you need to unload the whole d*mn SD card in order to experiment. Thank goodness my 30GB partition only has about 10Gigs of stuff on it.
good luck
bftb0 said:
Yes, it really did happen to me.
After it happened I took the trouble to download 4 different versions of TWRP (2.4.1.0-2.4.4.0), and I re-created the ext4 filesystem with:
- each of the different versions of TWRP and
- fastboot format userdata
after each, I did a "e2fsck -f -n <block-device>" on the (unmounted) userdata partition to see that they were clean, and I also dumped the output of "tune2fs -l <block-device>" to a file for comparison. Other than things that I would expect to be different (e.g. partition UUID identifier strings and timestamps), I noticed no differences. And also, I couldn't reproduce the problem for the life of me.
Above you mention full "data wipe". In TWRP (v2.4.1.0), this is presented as a separate button in the "Wipe" sub-menu where it (the last button in the first column) is labeled "Format Data". I suppose this is what you mean, but thought I would be explicit to avoid any confusion. (The "factory reset" procedure in the two custom recoveries - both CWM and TWRP - can not possibly re-create the ext4 filesystem in /data, as the /data/media/0 SD card files are in there. But the "Format Data" button does destroy & recreate the whole filesystem).
If you press on this button and at the same time capture the output of the "ps" command, you will see that TWRP recovery invokes the /sbin/make_ext4fs in the following way
Code:
make_ext4fs -l -32768 /dev/block/mmcblk0p<PARTNUM>
(CWM probably uses a different external command as it does not seem to have a "make_ext4fs" command in it's ramdisk. Probably mke2fs with ext4 options on the command line)
Anyways, I can't say I have my finger on exactly how to resolve the problem as I can not re-created it. But it did happen to me.
One thing you can try rather than using TWRP's "make_ext4fs" command (underneath that button "Format Data") is to reboot into the bootloader from TWRP, and do the file system formatting in fastboot instead of TWRP, as in:
Code:
fastboot format userdata
(noobs: caution, this is a full userdata wipe)
and then bop back into the recovery and check things with "tune2fs" report
Code:
tune2fs -l /dev/block/mmcblk0p<PARTNUM>
My 32G N7 shows a total block count of 7503608 (x 4k/block = 29.3 GiB) doing this.
As I mentioned before, it's a good idea to check to see you have the right size before you start restoring stuff to avoid wasting time. You can do it above with "tune2fs -l", or because TWRP seems to want to mount /data and /sdcard when it boots, just run
adb shell df -k /data
to get a report of total and used size.
Sorry this isn't more definiitve. I would have spent more time looking at this, but it is tedious as you need to unload the whole d*mn SD card in order to experiment. Thank goodness my 30GB partition only has about 10Gigs of stuff on it.
good luck
Click to expand...
Click to collapse
.
I'm a total command prompt beginner here, so could you explain where I'm doing the fastboot format command? In a terminal on the device? Using adb on my windows machine? I tried all that I could think of, but none of it worked. No form of wiping the device (yes, via "format data" in TWRP) seems to work. I'm still missing half of my storage.
EDIT: Okay, so I ran the command--I had to have the device in the bootloader, duh. Unfortunately, it still did not work. When recreating the file system, it said there was a total of ~3.5 million blocks--half what I saw reported in the other thread. Not surprising, since I'm missing half of my storage. How come this is working for other people but not me? I tried doing both at the same time, but to no avail. This is getting stupid.
upichie said:
EDIT: Okay, so I ran the command--I had to have the device in the bootloader, duh. Unfortunately, it still did not work. When recreating the file system, it said there was a total of ~3.5 million blocks--half what I saw reported in the other thread. Not surprising, since I'm missing half of my storage. How come this is working for other people but not me? I tried doing both at the same time, but to no avail. This is getting stupid.
Click to expand...
Click to collapse
Arrgh. Did you do the "fastboot erase userdata" first?
Here's what the fastboot format looked like on my device when I did this last (3/13):
Code:
$ fastboot erase userdata
******** Did you mean to fastboot format this partition?
erasing 'userdata'...
OKAY [ 4.974s]
finished. total time: 4.979s
$ fastboot format userdata
erasing 'userdata'...
OKAY [ 4.454s]
formatting 'userdata' partition...
Creating filesystem with parameters:
Size: 30734811136
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 7503616
Block groups: 229
Reserved block group size: 1024
Created filesystem with 11/1875968 inodes and 161774/7503616 blocks
sending 'userdata' (139197 KB)...
writing 'userdata'...
OKAY [ 33.733s]
finished. total time: 38.194s
As I said, I was unable to reproduce the problem even though I tried. But it almost seems like the creation of the new filesystem is inferring something from somewhere (but where?) about the userdata partition size which is incorrect. Almost like it happens because of something it sees in the prior filesystem (which is being destroyed). So it becomes irreproducible unless you can recreate the same starting condition.
There's other mysterious crap going on here too. See the output above? The part where it says "sending 'userdata' (139197 KB)" ? It will say this no matter where you run the command from, and there is no 139 MB "userdata.img" file in the folder it runs from!!! 139 MB? For a filesystem which is empty when you mount it?
I don't know. Here's one more thing to try, though. In addition to doing the "erase" & "format" commands, perhaps you could actually flash the userdata image from the stock ROM
Code:
fastboot erase userdata
fastboot format userdata
fastboot flash userdata userdata.img
and then when you boot to the custom recovery, perform a "factory reset" - or try doing the "Format Data" thing in TWRP after (or before?) the above steps.
If none of this works, I suppose you could try the equivalent sorts of things with CWM and see if you get a different result.
You don't need to permanently install CWM with a hard flash - you can just soft-boot it for a single session:
Code:
fastboot boot recovery-clockwork-touch-6.0.2.3-grouper.img
Sorry this is so vague, but you know how it goes - you stumble into a problem, start fooling around until it gets fixed - and because you weren't really expecting the problem in the first place, you haven't written down the exact conditions and steps. Like I said, I tried to re-create the problem a variety of ways - but failed at that effort.
good luck
I've been flashing N7 with no issues as recently as over the weekend. Today I tried to flash a new ROM and it failed. Tried a second, different ROM, same result. Do not know what I did. Any thoughts?
Error log would help greatly.
How do I get/generate the log? Haven't had to do it before.
Thanks,
Paul
The logs= errors displayed on the screen provided by the interface you use to flash the rom (recovery, computer...)
Does this help any?
TWRP V2.4.4.0
Updating partition details
E: Unable to open zip file
Error flashing zop
Updating partition details...
do I need to create a partition? Never get more details despite the tease.
Thanks,
First -
Try and download a different (NEWER) TWRP. Re-flash TWRP. Try again
or
Have you tried completely wiping the device? And pushing a ROM from ADB or using a USB OTG and Memory stick?
I had issues with my nexus becoming VERY unstable. Leading to issues.
I completely, and I mean completely, wiped. To the point that all that device basically had was a recovery, and a bootloader.
I proceeded to flash again, BOOM all fixed up.
Is there a new TWRP?
I did a factory restore after wiping everything thing, if that is what you mean?
It was working as expected last week, don't know what I did to screw it up
Boot recovery try the operation, choose advanced then copy log to sdcard. The paste the log results.
sent via electromagnetic radiation.
ibsk8 said:
Boot recovery try the operation, choose advanced then copy log to sdcard. The paste the log results.
sent via electromagnetic radiation.
Click to expand...
Click to collapse
Did this, and it said it copied but I am unable to locate it. It says 0\media\data But that folder structure doesn't exist, at least according to file expert
Will a complete wipe/restore create a partition?
pmgreen said:
Will a complete wipe/restore create a partition?
Click to expand...
Click to collapse
None of the instructions currently found in this forum alters the partitioning of the N7. Not fastboot & not the custom recovery, either.
You are chasing a red herring I think. That message you see is about the recovery performing a scan to check to see if there is a change in file systems (or partitioning of external devices) ... which might have occurred in preceding (custom recovery) operations, but didn't in this particular case.
pmgreen said:
Does this help any?
TWRP V2.4.4.0
Updating partition details
E: Unable to open zip file
Error flashing zop
Updating partition details...
Click to expand...
Click to collapse
Focus your efforts here; it certainly looks like a first-order problem.
bftb0 said:
None of the instructions currently found in this forum alters the partitioning of the N7. Not fastboot & not the custom recovery, either.
You are chasing a red herring I think. That message you see is about the recovery performing a scan to check to see if there is a change in file systems (or partitioning of external devices) ... which might have occurred in preceding (custom recovery) operations, but didn't in this particular case.
Focus your efforts here; it certainly looks like a first-order problem.
Click to expand...
Click to collapse
Think reinstalling TWRP would help? It was working fine so I'm a bit stumped what changed and why
pmgreen said:
Think reinstalling TWRP would help? It was working fine so I'm a bit stumped what changed and why
Click to expand...
Click to collapse
You can also soft-boot a recovery without actually flashing it, e.g.
Code:
fastboot boot custom-recovery.img
I suppose you could then poke around and see if it is having troubles mounting any of the normal partitions (/data, /system, or /cache). Look in the kernel boot log of the recovery (cat /proc/kmsg or "dmesg") to see if anything looks strange, etc.
There have been a couple of reports from folks who developed problems that looked like eMMC flash media errors - loss of partitions, failure to mount /data, et cetera. At the moment though, your symptoms are very generic and non-specific, as in "it doesn't boot".
I suppose you saw no errors at all reported on the screen during that stock-install-via-fastboot procedure?
bftb0 said:
You can also soft-boot a recovery without actually flashing it, e.g.
Code:
fastboot boot custom-recovery.img
I suppose you could then poke around and see if it is having troubles mounting any of the normal partitions (/data, /system, or /cache). Look in the kernel boot log of the recovery (cat /proc/kmsg or "dmesg") to see if anything looks strange, etc.
There have been a couple of reports from folks who developed problems that looked like eMMC flash media errors - loss of partitions, failure to mount /data, et cetera. At the moment though, your symptoms are very generic and non-specific, as in "it doesn't boot".
I suppose you saw no errors at all reported on the screen during that stock-install-via-fastboot procedure?
Click to expand...
Click to collapse
The only error is that it can't open the zip. I've tried downgraded TWRP, then upgrading back. Tried flashing the existing rom.
Nothing has worked. The N7 is functional, just will not allow me to flash
pmgreen said:
The only error is that it can't open the zip. I've tried downgraded TWRP, then upgrading back. Tried flashing the existing rom.
Nothing has worked. The N7 is functional, just will not allow me to flash
Click to expand...
Click to collapse
Well, if the source material can't be opened, then there is nothing to be flashed.
So maybe it is better to call this a "can't open files" problem instead of a "can't flash" problem.
Are there any special characters in the file name ... or spaces? If so, try renaming the file so the name only contains [a-z], [A-Z], [0-9] plus dash, underscore, and dot.
The other thing that can happen is if you drop a file in /data/media/0 as the root user, it will show up under /sdcard, but can't be read by non-privileged users via the /sdcard/ path. I'm not sure what the exact details are here - much less why this would effect the recovery (as you would expect everything to be running as root there) - but you can detect this problem by using a terminal emulator, and looking for differences in ownership or file permission:
Code:
$ su
# cd /data/media/0
# ls -ld *
use chown and chmod as appropriate to fix files as needed
bftb0 said:
Well, if the source material can't be opened, then there is nothing to be flashed.
So maybe it is better to call this a "can't open files" problem instead of a "can't flash" problem.
Are there any special characters in the file name ... or spaces? If so, try renaming the file so the name only contains [a-z], [A-Z], [0-9] plus dash, underscore, and dot.
The other thing that can happen is if you drop a file in /data/media/0 as the root user, it will show up under /sdcard, but can't be read by non-privileged users via the /sdcard/ path. I'm not sure what the exact details are here - much less why this would effect the recovery (as you would expect everything to be running as root there) - but you can detect this problem by using a terminal emulator, and looking for differences in ownership or file permission:
Code:
$ such
# cd /data/media/0
# ls -ld *
use chown and chmod as appropriate to fix files as needed
Click to expand...
Click to collapse
Thanks bftb, you are correct it's a can't open zip. No error than fail and it can't open the zip. It says updating partition but nothing changes
The file names are from the developers, once of which I recently successfully flashed. Tried coping the log to the SD card, but unable to find /data/media/0. Do I need to recreate a partition?
(FYI there was an auto-correct typo in my prior post - "su" not "such". Derp)
pmgreen said:
Do I need to recreate a partition?
Click to expand...
Click to collapse
No. (There is no way to do that with the tools we have anyway)
Unless what you mean by "recreate" is rebuild/reinitialize a filesystem in a partition - that's a possibility.
You need to try and figure out why you can't read files.
As a workaround, you can put files on a USB key (FAT formatted, not NTFS) and using TWRP access them by putting the USB key on the other end of a OTG cable.
Your posts are a bit vague - I can't even tell if you have tried other ROM files, whether you checked them to see if they are the correct size/checksum, etc.
pmgreen said:
Tried coping the log to the SD card, but ...
Click to expand...
Click to collapse
At this point, your best approach is still to follow the initial advice of 'ibsk8'. Look in the log file for any further details about errors that occurred.
The logs are typically in /cache/recovery/ or (while the custom recovery is running) in /tmp
Use "adb pull" to get the log file to your PC and have a look at it. If you can't find anything obvious in there, then cut-n-paste the file to http://pastebin.com and provide the link to us.
bftb0 said:
At this point, your best approach is still to follow the initial advice of 'ibsk8'. Look in the log file for any further details about errors that occurred.
The logs are typically in /cache/recovery/ or (while the custom recovery is running) in /tmp
Use "adb pull" to get the log file to your PC and have a look at it. If you can't find anything obvious in there, then cut-n-paste the file to http://pastebin.com and provide the link to us.
Click to expand...
Click to collapse
I am not familiar using ADB pull. Tried using a root file manager to access the log but don't see.
Greatly appreciate your help, let me know what other info I should paste.
Thanks,
Hi,
I urgently need help for my nexus 7 that has stopped charging or recognising even the original ASUS usb cable (have tried many others as well, same result). I'm currently charging it via the method of powering it of and plugging it in without the android os running. I have even tried to connect it to my PC in bootloader mode. I have the custom trinity kernel install and want to return my device to stock kernel and os state. However I do have TWRP and need help from there to install the stock image. I have previously tried many thing such as completely wiping the system and clearing any caches in TWRP. Also I have seen that in TWRP it recognises my usb (connected via OTG cable).
So could anyone please help me with returning my nexus 7 back to stck state using TWRP.
And is there also a way of unrooting my device without using PC (using TWRP instead)?
-- Update -- I have no OS installed (tried to delete custom kernel) --
Thanks in advance.
Nexus 7 state:
- custom trinity kernel
- TWRP
- USB connection to PC not working
There should be help for you here in this sticky in this Q&A forum:
http://forum.xda-developers.com/showthread.php?t=1907796
Note 2 - Nexus 7 - Charge - Player 5.0 - Fascinate
<><><><><><><><><><>
Read twice, flash once
USB doesn't work > can't use adb
ezas said:
There should be help for you here in this sticky in this Q&A forum:
http://forum.xda-developers.com/showthread.php?t=1907796
Note 2 - Nexus 7 - Charge - Player 5.0 - Fascinate
<><><><><><><><><><>
Read twice, flash once
Click to expand...
Click to collapse
Thanks for replying, but the problem is that I can't use adb (can't connect with PC), the only thing I can do is access TWRP and usb storage (via OTG in TWRP). So I need the stock rom in a "rom" like format so I can flash it using TWRP. Could anyone please tell me another way or give the stock rom in a format that TWRP can flash (ASAP plz). Thanks in advance
The easiest thing (of course) would be if somebody put together a flashable return-to-stock ROM. I've done it before for other devices, but haven't gotten around to doing it for the N7.
You didn't really say whether you were talking about (a) "exactly stock", or whether you wanted (b) a stock recovery put back in place, or whether you were (c) also trying to get the bootloader re-locked.
Case (c) can not be done using anything except fastboot (unless you previously recorded your bootloader while it was in a locked state), so I'll just assume that you are talking about (a) and (b), and that you are going to leave the bootloader unlocked - or you had already locked your bootloader after rooting and installing a custom recovery.
I see that you are trying (in another thread) to get somebody to make you a Nandroid backup of /system from a pure stock ROM. That would be one way of doing things (making sure that you get a grouper image if you have a grouper (WiFi) or a tilapia image if you have a tilapia N7 (3G) device). And while we are on the subject, I'll throw out another way you can do just that:
- The Google "factory" system.img files are in a sparse ext4 format that can not be directly mounted (e.g. using a loopback mount) in Linux. But, the Android toolkit includes a utility (for Linux) called "simg2img" (aka Sparse IMaGe to IMaGe) which can convert the sparse ext4 "system.img" image file to a regular ext4 format image file. This could be created, mounted via a loopback (using Linux, of course), and then a "tar" backup of the whole shebang is made. The TWRP and CWM nandroid backup images are just TAR archives. So If you grok what I am telling you, you have the power to create your own "Nandroid" /system backup file directly from the factory images. (Windoze-only doods need not apply.)
If you take this route, then you only need the recovery image plus the hacked "Nandroid" backup to "restore" directly to a pure stock device using only a custom recovery. (The recovery partition can be overwritten while the recovery is running because the partition is not "in use" after the boot completes - the recovery kernel and ramdisk live entirely in memory while they are running.)
But as I noted above, this will not re-lock the bootloader. It will put stock software back on the device, though.
If you intend to save anything off the device, do it before you begin this. The stock recovery "factory reset" procedure clears the ENTIRE /data partition including the pseudo-SD card area.
good luck
how would you do the procedure
bftb0 said:
The easiest thing (of course) would be if somebody put together a flashable return-to-stock ROM. I've done it before for other devices, but haven't gotten around to doing it for the N7.
You didn't really say whether you were talking about (a) "exactly stock", or whether you wanted (b) a stock recovery put back in place, or whether you were (c) also trying to get the bootloader re-locked.
Case (c) can not be done using anything except fastboot (unless you previously recorded your bootloader while it was in a locked state), so I'll just assume that you are talking about (a) and (b), and that you are going to leave the bootloader unlocked - or you had already locked your bootloader after rooting and installing a custom recovery.
I see that you are trying (in another thread) to get somebody to make you a Nandroid backup of /system from a pure stock ROM. That would be one way of doing things (making sure that you get a grouper image if you have a grouper (WiFi) or a tilapia image if you have a tilapia N7 (3G) device). And while we are on the subject, I'll throw out another way you can do just that:
- The Google "factory" system.img files are in a sparse ext4 format that can not be directly mounted (e.g. using a loopback mount) in Linux. But, the Android toolkit includes a utility (for Linux) called "simg2img" (aka Sparse IMaGe to IMaGe) which can convert the sparse ext4 "system.img" image file to a regular ext4 format image file. This could be created, mounted via a loopback (using Linux, of course), and then a "tar" backup of the whole shebang is made. The TWRP and CWM nandroid backup images are just TAR archives. So If you grok what I am telling you, you have the power to create your own "Nandroid" /system backup file directly from the factory images. (Windoze-only doods need not apply.)
If you take this route, then you only need the recovery image plus the hacked "Nandroid" backup to "restore" directly to a pure stock device using only a custom recovery. (The recovery partition can be overwritten while the recovery is running because the partition is not "in use" after the boot completes - the recovery kernel and ramdisk live entirely in memory while they are running.)
But as I noted above, this will not re-lock the bootloader. It will put stock software back on the device, though.
If you intend to save anything off the device, do it before you begin this. The stock recovery "factory reset" procedure clears the ENTIRE /data partition including the pseudo-SD card area.
good luck
Click to expand...
Click to collapse
Thanks for the information. I do want my device (grouper WiFi) to go back to factory state (c - get rid of superSU and busybox). However I do have some questions regarding the creating nandroid backup by your method. As I have Ubuntu 12.10 installed, how would I do the procedure? And what do you mean by "mounted via a loopback"? Also is it only "system.img", what about "boot.img", "recovery.img" and "userdata.img"?
Is it possible that you could maybe give me the nandroid backup.tar as I am not much experienced, I would really appreciate it.
Thanks in advance.
Well if a (stock) factory reset erases the /data partition, userdata.img sorta doesn't matter, right?
boot.img and recovery.img are just binary blobs, so they could be taken from the factory image and used "as is" as part of your hand-assembled "Nandroid Backup"
That only leaves system.img - previously discussed.
$ sim2img google-factory-sparse-system.img ext4.system.img
$ sudo /bin/bash
# losetup /dev/loop0 ./ext4.system.img
# mkdir /mnt/Foo
# mount -t ext4 -o ro /dev/loop0 /mnt/Foo
# cd /mnt/Foo
# tar cf /home/newb/fakenandroidsystem.tar .
# cd /home/newb
# chown newb.newb fakenandroidsystem.tar
# umount /mnt/Foo
# rmdir /mnt/Foo
# losetup -d /dev/loop0
# exit
$
You will need to either find the sim2img utility as a prebuilt or download it and build it. You might need to fool with tar command-line options during the archive creation - I notice that the TWRP nandroid tar archives (system.emmc.ext4.win) seem to have absolute pathnames rooted at "/" rather than "/system". Don't know if this is significant or not.
good luck
PS it goes without saying that you need to be extremely careful about giving up root when doing this: imagine that you restore a bad /system image along with a stock recovery - you will have an unbootable device that can not be rooted without hardware repair of the USB. You might want to initially do a test restore or two without overwriting the custom recovery
with the stock version. And keep a flashable ROM on the SDcard, too. Once you have everything working correctly, only then should you restore the recovery back to stock.
Do I load the nandroid direct to my USB device (connect via OTG and then flash in TWRP) after converting the .img and from what path in ubuntu shell am I writing those commands?
Sounds like you don't have adb set up there is a ppa to set it up for you Google for it. Then try to run adb devices and it should show up
Sent from my PG86100 using Tapatalk 2
There is no problem with adb as it did work before (when USB port did work), it doesn't even show up in device manager(windows) anymore. I cannot connect with my device to my PC via USB as the port is faulty nor does it charge with the oem wall charger when system is one. I can only charge it when the system is completely turned off and then when I plug it in PC/wall charger via USB. However I can access my USB drive via OTG only in TWRP and this is only way I can flash/restore to stock system. I want to return it to stock to send it back to google (exchange).
EDIT: If you are coming here for the first time, this guide should still work, but @PorygonZRocks has created a flashable zip that should deal with a lot of these issues automatically. You can check out his post here:
https://forum.xda-developers.com/showpost.php?p=75787067&postcount=699
This method will indirectly allow you to root the LG Gpad v410 after it has been upgraded to Lollipop 5.1.1. Yes. Rooting LG v410 Lollipop. It's through a downgrade, but it works.
It took a while to get working, but here's how I did it. The process is straightforward, but the details matter greatly. You will brick your device if you mess up. Please read everything *first* before you do anything. Be sure you understand the process. I'll try to explain what's going on along the way.
An external SD card is extremely helpful for this process. You *could* adb push everything, but that will tedious.
First, you need some files.
The 4.4.2 KDZ which is a TEST OS, but it can be rooted and it downgrades to a Bump'able bootlaoder:
http://forum.xda-developers.com/g-pad-10/general/kdz-lg-g-pad-7-0-v410-t3224867
The LG 2014 Flash Tool:
http://www.mediafire.com/download/fwrcd3pdj0svjtb/LG_Flash_Tool_2014.zip
Android LG Drivers:
https://www.androidfilehost.com/?fid=24052804347802528
Parted for Android. You can probably find it other places, but I found this file:https://dl.dropboxusercontent.com/u/84115590/LG%20G2%2016GB%20Solution/sdparted-recovery-all-files.zip
EDIT: There seems to be a lot of confusion here. My bad. All you need is the file named "parted" from this zip file - nothing else. Just put that one file in the root of your external SD card.
https://dl.dropboxusercontent.com/u/84115590/LG G2 16GB Solution/sdparted-recovery-all-files.zip linked from here: http://www.**********.com/your-32gb-lg-g2-shows-only-16gb-storage-space-heres-the-fix/
EDIT2: The dropbox link is down. I've attached the file directly.
The Candy5 ROM (This will potentially save you some manual steps. Somewhat optional, but highly recommended):
http://forum.xda-developers.com/g-pad-10/development/rom-candy5-g-pad-v410-lollipop-5-1-1-v2-t3111987
Flashify APK:
http://www.apkmirror.com/apk/christian-gollner/flashify/flashify-1-9-1-android-apk-download/
TWRP for the v410:
http://forum.xda-developers.com/g-pad-10/development/recovery-twrp2-8-5-0lgv400-410-t3049568
LG One Click Root:
http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
(You may use Purple Drake or whatever else you want. They all use the same root script as this does and the GUI is helpful for novices.)
Android SDK (specifically adb.exe. After installing go to SDK Manager and ensure that Android SDK Platform Tools is checked):
http://developer.android.com/sdk/index.html
For clarification below, when I have commands in "quotes" they are Windows commands. When they are in `backticks` they are commands that you run inside of ADB which actually run on your device....as root. Root can screw things up. Please be extra cautious. If you blame me for messing up your device I will laugh at you. But that's not gonna happen, right? Good. Let's go.
Now that you have everything, put it all into a folder where you can access it easily.
Install the LG Drivers.
Install Android SDK (or otherwise get adb.exe).
Extract all of the archives.
Move the KDZ to the LG Flash Tool 2014 folder.
Put the tablet into Download Mode by powering it off, holding VolUp, and plugging in the USB cable. Press VolUP when instructed. You must be in Download mode before continuing.
Run LGFlashTool2014.exe. Select the KDZ file. Click "CSE Flash". Click "Start". Select "English" and click OK. Do not change anything else.
WAIT for the flash to continue. If you really want to brick your device, here's a good opportunity.
The device will reboot into Android 4.4.2. You will only have 4GB of internal storage at this point. DON'T PANIC! We are fixing it.
Enable USB debugging.
Connect the device.
Install and run LG One Click Root. Wait for the device to be rooted before proceeding.
Copy the Flashify apk, TWRP image, and Candy5 ROM to your external SD card.
Install Flashify and flash TWRP to the recovery partition.
Use the Flashify menu to reboot in to recovery.
DON'T PANIC! You will get white vertical lines on the boot screen from now on. They only show up during boot animations. A small price to pay. This may be fixed at a later date. for the time being! Thanks to marcsoup's first post ever, we have a fix! Details below. PLEASE click this link and thank him!
Things get tricky here. Copy parted to your external SD card and then run "adb shell" from Windows to get a shell in TWRP.
In TWRP, unmount /data by tapping Mount > uncheck Data.
`cp /sdcard/parted /sbin/` This copies the parted binary to /sbin so it can be executed in the path. I had trouble running `/sdcard/parted`, but YMMV.
`chmod +x /sbin/parted` Make it executable.
`parted /dev/block/mmcblk0` Run parted against the internal mmc
`p` Prints the partition table.
`rm 34` Deletes partition 34 labeled "grow". This is the root of our problem. The KDZ apparently only creates a 4GB partition, I assume so the test build has maximum compatibility with all sized devices.
`rm 33` Deletes partition 33 "userdata"
`p` Print to verify
`mkpartfs` Create a partition and put a filesystem on it. If we only expand the partition it won't help us because the filesystem is still only 4 GB.
a) name: userdata
b) type: ext2 (the tool only supports ext2. This is ok for now.)
c) start: 3439MB (the end of part 32. IT MAY BE DIFFERENT FOR YOU!) Be sure you do not omit the MB part otherwise the offset will overwrite another critical partition.
d) end: 15.8GB (where "grow" ended above. IT MAY BE DIFFERENT FOR YOU!) Be sure you do not omit the GB part otherwise the offset will overwrite another critical partition.
`p` Verify. For me it did not name the partition properly. Gotta fix that.
(if necessary) `name 33 userdata` This is critical for mount to find it in /dev/block/platform/msm.sdcc.1/by-name/ on some/all ROMS.
`p`. Verify one last time. Compare it to my partition table in the attachments. If you want to brick, delete some random partitions here.
Flash Candy5 with TWRP. It's only 239 MB, so it will flash quickly. I do this because Candy5 will reformat mmcblk0p33 from ext2 to ext4 for you. It does this as part of it's system boot, apparently. If you install a different ROM that does not do this, you can reformat it by running `make_ext4fs /dev/block/mmcblk0p33`. If your ROM does not have make_ext4, it likely has some differnt method to make an EXT4 filesystem. `/system/bin/mke2fs -t ext4 /dev/block/mmcblk0p33` may work better. Just flash Candy5 and be done with it.
Tap Wipe > Swipe to Factory Reset.
Tap Reboot > System.
WAIT!!! It will take a minute for the ROM to start the first time. You will have white lines and and possibly a white screen. WAIT. It's moving the DEX files to cache, formatting a partition, creating default folders on the internal storage, and several other things. WAIT! When the screen goes dim or turns off then it's ready.
Cycle the display or turn it on. You should be at the Candy5 lock screen.
USB debugging is on by default. Run "adb shell".
`mount | grep userdata` Make sure mmcblk0p33 is mounted.
`df` Make sure /data is 11.3 GB (or whatever size it is on non-16GB devices).
HELL YEAH, you downgraded, rooted, and fixed the partition problem. Enjoy your tablet!
Thanks to dopekid313 for finding the KDZ.
Thanks to timmytim for Candy5.
Thanks to the creators of the root script, flashify, TWRP, and XDA for being so awesome.
Thanks to marcsoup for fixing a fix to the white lines.
Thanks to navin56 for the partition dumps. PLEASE thank his post!
White lines fix.
What we are going to do is flash the aboot partition with the stock image provided by navin56. I've removed the extra files from the dump, so simply download aboot.img.7z below. Unzip it using 7zip.
These commands are to be run in TWRP. Reboot to TWRP recovery and connect with "adb shell". All of the following commands will be run in ADB under TWRP. If you cannot figure out how to get here, please post in the thread and someone will help you. Onward:
If you do everything correctly then you don't have to reflash your ROM and you won't lose data. This process can be done any time after flashing the KDZ, even before you follow the steps above to resize the userdata partition. It's a completely separate process.
Unzip aboot.img.7z so you have the file named aboot.img. You should also make sure that aboot.img's MD5 sum is e97431a14d1cee3e9edba513be8e2b52. Do not flash the 7z file. Please.
Copy aboot.img to your external SD card. It should live at /sdcard/aboot.img
Boot to TWRP and run "adb shell"
`ls -al /dev/block/platform/msm_sdcc.1/by-name/` Let's make sure we are flashing the right partition. On my device "aboot" is /dev/block/mmcblk0p6. You should verify this on your device or you WILL brick your tablet.
`dd if=/dev/block/mmcblk0p6 of=/sdcard/aboot-fukt.img` Let's back up our current aboot partition before we go flashing things just in case there are unintended consequences later. Be sure you have the same partition that "aboot" referred to in the 4th step or you have just backed up the wrong partition.
`dd if=/sdcard/aboot.img of=/dev/block/mmcblk0p6` Be sure the file exists, is the correct aboot.img, and you are flashing the right partition. You have been warned!!
Reboot TWRP and enjoy your boot animations again.
If I missed anything, please let me know. As far as I know this is the very first tutorial that details what is necessary to accomplish this. Please hit the Thanks button on every thread that you visit to download files!
FAQ:
Q: Why do I only have 11.3 GB of space when my device is 16GB?
A: The entire internal SD card (eMMC) is 16 GB. Gotta have someplace to install the bootloader, recovery, android, the modem OS, the secondary bootloader, the cache, the resource and power manager, and all of the other partitions necessary for the table to operate. Please look at the second screenshot in the OP. All of those 33 partitions take up room on the internal card. Fortunately ALL of those partitions ONLY take up about 4.4 GB. Hence the 'userdata' partition is ~11.3 GB.
If anyone wants to use my work to create a flashable zip to make it easier for novices, please do so. My problem is solved and I don't have the time to create the zip. Please post any questions and I'll gladly answer them! I'm so stoked that we have a usable downgrade method now!
Thank You, Worked Great
Thanks for making this I was gonna do it but was to lazy lol and thanks for linking my thread and giving cred instead of just linking straight to the kdz thank you
grandamle91 said:
Thank You, Worked Great
Click to expand...
Click to collapse
Glad to be of help!
dopekid313 said:
Thanks for making this I was gonna do it but was to lazy lol and thanks for linking my thread and giving cred instead of just linking straight to the kdz thank you
Click to expand...
Click to collapse
Of course! If you hadn't obtained the firmware then we'd all still be looking for a solution. It pisses me off to no end when people try to take credit for other people's work. We all just need to realize and acknowledge that we are simply standing on the shoulders of those who did the work necessary for each of us to do our work.
I just noticed since we formatted the userdata it screws up TWRP. It won't mount Data and it says the settings are corrupted
grandamle91 said:
I just noticed since we formatted the userdata it screws up TWRP. It won't mount Data and it says the settings are corrupted
Click to expand...
Click to collapse
Is this after you've rebooted into Candy5 and the partition is reformatted as ext4 (or you've done so manually)? TWRP may not be able to mount an ext2 partition.
EDIT: I just tested this. Following my instructions and flashing to Candy5, TWRP sees mmcblk0p33 (userdata) as the full size and mounts it at /emmc.
For clarification, after you run the parted commands, it will mess with the partition table and TWRP will most likely not be able to see it to remount it - at least not until after a reboot. This is why you need an external SD card from which to install ROMs.
/data not mounted
Edit: nevermind. The partition 33 was still ext2. I had to run make_ext4fs /dev/block/mmcblk0p33 and now I am able to mount /data. Thanks.
Thanks for taking the time to help us.
I followed the steps and till 33 I am good. But once I am in Candy5, I am not able to adb shell (adb not recognizing device eventhough usb debugging is on). I rebooted to recovery and adb works there. But my /data partition is not enabled in TWRP. I am not able to check it either under Mount in TWRP.
Code:
mount | grep userdata
is empty
Code:
df
does not show data
I tried this and my tablet bootlooped. I was able to get into fastboot and restore. I would GREATLY appreciate it if someone who has the time, would kindly donate their valuable time to into making an exe zip or something.
gridironbear said:
I tried this and my tablet bootlooped. I was able to get into fastboot and restore. I would GREATLY appreciate it if someone who has the time, would kindly donate their valuable time to into making an exe zip or something.
Click to expand...
Click to collapse
At what point did it bootloop? What was the last step that you took before rebooting?
Zip
I would really appreciate a zip file as I have never been savvy with adb and for whatever reason it doesn't want to work on Windows 10.
drumm3rb0y said:
I would really appreciate a zip file as I have never been savvy with adb and for whatever reason it doesn't want to work on Windows 10.
Click to expand...
Click to collapse
A zip file for what part? The only part that requires ADB directly is to fix the internal storage. You absolutely have to flash the KDZ and then root before you can do anything. If you are on 5.x then you have no possible way to root, much less flash a zip file.
If you tell me what exactly you are having issues with I will try to help.
fatbas202 said:
A zip file for what part? The only part that requires ADB directly is to fix the internal storage. You absolutely have to flash the KDZ and then root before you can do anything. If you are on 5.x then you have no possible way to root, much less flash a zip file.
If you tell me what exactly you are having issues with I will try to help.
Click to expand...
Click to collapse
The adb part is the part im having issue with. Everything else is flashed already. I was wondering if you could make a zip for the adb part so I can just flash it through twrp.
thanks for the great help. it did work perfectly to regain the lost space.
what about white lines ? is there any solution for that problem ?
I have tried flashing back stock recovery extracted from kdz, dd' but didn't help.
Now i am thinking of flashing back the aboot.bin extracted from original kdz or i can dump ".img" from another working device. (i have 4 similar devices)
what is your opinion i m not a developer and i need your advise. should i go ahead and which partition should i dd ? aboot or abootb or boot ?
regards
shahidmianoor said:
thanks for the great help. it did work perfectly to regain the lost space.
what about white lines ? is there any solution for that problem ?
I have tried flashing back stock recovery extracted from kdz, dd' but didn't help.
Now i am thinking of flashing back the aboot.bin extracted from original kdz or i can dump ".img" from another working device. (i have 4 similar devices)
what is your opinion i m not a developer and i need your advise. should i go ahead and which partition should i dd ? aboot or abootb or boot ?
regards
Click to expand...
Click to collapse
I have no solid evidence of this, but I suspect that the white lines are caused by a display driver issue where when the bootloader hands over control of the display to the kernel it doesn't get reinitialized properly. I have no ideas as to how to get rid of that at the moment but if I stumble across something I'll be sure to post here.
While I'm not an Android developer, I've been a Linux admin for 10+ years and have a lot of experience with Android devices. I'd be really hesitant to go flashing things ad hoc. While Download Mode may save you if you flash the wrong thing, I'm not entirely sure what the limitations that you may run in to with a locked bootloader are.
After having this device for months on 5.x and FINALLY being able to downgrade and run custom ROMs with root, not seeing a boot animation is a pittance to pay. But I'll keep looking.
i have same problem entered in TWRP but when ADB sheel thorough DP tools it didn't connect to my device. i m also using windows 10
Do I need to Re-mount Data ? I press format data button at TWRP and mount data. It looks work great.
After all process, it shows 16Gb total at storage, 11.04GB available. it works perfectly.
I need the stock V41010d, so I reflash the stock rom rooted at [ROM][STOCK](V410 ONLY)KOT49I.V4101d | 4.4.2 | Rooted + Busybox
Now, my Gpad is at stock V41010d, but I have a question about the boot screen, is it still with white lines and white screen? Any method to fix it?
Hello,
Thanks for the great work. unfortunately I am facing some difficulty, starting from step# 16 "Things get tricky here", how to run"adb shell in TWRP?
also can I use minimal_adb_fastboot_v1.1.3_setup.exe as mentioned in the link in the OP http://www.droidviews.com/your-32gb-lg-g2-shows-only-16gb-storage-space-heres-the-fix/ ?
also I noticed the path have been used includes 'parted' folder, but the folder I have after unzipping the parted zip called 'sdparted-recovery-all-files', do I rename the folder to 'parted' instead?
please help and excuse my broken English.
I'm also having trouble with the adb shell step. When my device is powered on normally, adb commands work. However, in TWRP mode my computer can't recognize the tablet, mount properly, and copy over parted. All the steps have been identical to this point. Any ideas?
iphone5sf said:
Do I need to Re-mount Data ? I press format data button at TWRP and mount data. It looks work great.
After all process, it shows 16Gb total at storage, 11.04GB available. it works perfectly.
I need the stock V41010d, so I reflash the stock rom rooted at [ROM][STOCK](V410 ONLY)KOT49I.V4101d | 4.4.2 | Rooted + Busybox
Now, my Gpad is at stock V41010d, but I have a question about the boot screen, is it still with white lines and white screen? Any method to fix it?
Click to expand...
Click to collapse
You shouldn't need to remount or format data. The parted command nukes the filesystem and creates a new one formatted as ext2. At this point the running kernel has the old partition table loaded and won't know that the partition has been extended. Simply flash Candy5 and reboot at this point and it will reformat the userdata partition.
See above for the white lines during the boot animation. Known issue, no fix in sight, doesn't really matter.
nmnm4alll said:
Hello,
Thanks for the great work. unfortunately I am facing some difficulty, starting from step# 16 "Things get tricky here", how to run"adb shell in TWRP?
also can I use minimal_adb_fastboot_v1.1.3_setup.exe as mentioned in the link in the OP http://www.droidviews.com/your-32gb-lg-g2-shows-only-16gb-storage-space-heres-the-fix/ ?
also I noticed the path have been used includes 'parted' folder, but the folder I have after unzipping the parted zip called 'sdparted-recovery-all-files', do I rename the folder to 'parted' instead?
please help and excuse my broken English.
Click to expand...
Click to collapse
You only need the sdparted-recover-all-files.zip from that site. "parted" is not a folder, but the binary (without a file extension) inside of that zip file. Copy that file to /sbin and you are in business.
zmali1 said:
i have same problem entered in TWRP but when ADB sheel thorough DP tools it didn't connect to my device. i m also using windows 10
Click to expand...
Click to collapse
summonholmes said:
I'm also having trouble with the adb shell step. When my device is powered on normally, adb commands work. However, in TWRP mode my computer can't recognize the tablet, mount properly, and copy over parted. All the steps have been identical to this point. Any ideas?
Click to expand...
Click to collapse
I'd recommend installing the SDK and pulling the drivers from that. Alternatively, you can try the drivers here: https://github.com/koush/UniversalAdbDriver.
Technically, when I ran the "parted" commands I was actually booted in to rooted 4.4.2 from the KDZ; I wasn't actually in TWRP. It's just not a very recommended way of going about it. I explained how to run all of this from TWRP, but there's no technical reason that you *can't* run this from Android. You just *shouldn't* because you can't cleanly unmount the filesystem and it theoretically could cause filesystem corruption. I just figured that I don't care about that partition getting corrupted since it's getting wiped out.