Database Users

JMC: *** Flashing Guide ***

READ BEFORE YOU FLASH: THIS FIRMWARE HAS A PROTECTED BOOTLOADER THAT WILL PREVENT YOU FROM FLASHING SAMSUNG OFFICIAL FIRMWARE.
MORE INFO HERE
I don't know if this process actually flash boot and spl because JM6 doesn't seem to have them, but you're on your own and I don't recommend you to do it.
Ok I'm going to make a detailed guide of how this worked for me because succeed depends a lot on which firmware you have in your tab. It's a good idea to start with JM6 since you can flash it completely if you have an older firmware or JMA (I guess you won't be able to flash it in the future if a new firmware is released). You won't lose your internal SD Card data but your phone will be factory reset.
1) Download JM6 from HERE
You'll get Odin 1.7 + PIT + PHONE + PDA + CSC.
2) Download JMA from here: HERE
3) Download JMC from here: HERE
4) Start Odin 1.7 and select:
*PIT P1_SMD_MAP.pit
*REPARTITION YES
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: CODE_P1000XXJM6.tar.md5
*PHONE: MODEM_P1000XXJM6.tar.md5
*CSC: CSC_P1000OXAJM6.tar.md5
5) Put your TAB in download mode: Turn it off, press POWER + VOL DOWN
6) Press start in ODIN and wait until process is completed. Your tab will REBOOT in download mode.
7) Now press POWER + VOL UP and when you see SAMSUNG logo RELEASE POWER BUT KEEP PRESSING VOL UP in order to enter recovery and let the TAB flash dbdata, it'll reboot and boot into android. (unplug your USB cable because Odin won't recognize it on some systems)
8) Open Odin 1.7 again or press RESET and select:
*PIT: NONE
*REPARTITION NO
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: JMA.tar (from JMA file obviously)
*PHONE: NONE
*CSC: NONE
9) Repeat 5), 6) and 7)
10) Open Odin 1.7 again or press RESET and select:
*PIT: NONE
*REPARTITION NO
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: P1000XXJMC_P1000OXAJMC_P1000XXJMA_HOME.tar (from JMC file obviously)
*PHONE: NONE
*CSC: NONE
11) Repeat 5), 6) and 7)
I have an AT&T TAB and this process worked for me.
If you need 850 + 1900 you only have to flash MODEM (PHONE button in ODIN) from HERE (modem_bell_i9000.zip) with No PIT, no repartition, no PDA and no CSC.
I hope this helps anybody and sorry about my english
EDIT: If for some strage reason you get the !!! --- !!! screen in your tab, don't panic. You can start the whole process again, Odin will detect your phone, it's a download mode anyway.
EDIT2: I always choose to wipe all my data. I use Titanium backup and I can get most of my data back from there. It's better to have a functional tab than a brick full of useless data. Wiping will always be safer.
EDIT3: Made some modifications to step 7. What you need to do is to enter recovery and that's it. It wasn't clear. Now I think you'll get it right. I didn't test it without step 7 but some people seems to be doing well without doing step 7. Maybe device is entering recovery automatically and flashing dbdata on its own (this is to be expected but sometimes it just doesn't happen).

What about rooting the device before you flash...?

Working great!!! However, I just didn't do step 7 in any of the 3 updates. What exactly do you mean in step 7? Which of the 4 options should I choose in Step 7?
Thanks

pt4audi said:
What about rooting the device before you flash...?
Click to expand...
Click to collapse
I could root my device with z4root or superoneclick.
lucboucim said:
Working great!!! However, I just didn't do step 7 in any of the 3 updates. What exactly do you mean in step 7? Which of the 4 options should I choose in Step 7?
Thanks
Click to expand...
Click to collapse
When flashing ends your device should install dbdata in recovery mode. Maybe with this procedure dbdata is flashed automatically when flashing JM6 at the beginning it's not necessary to do it manually.
If dbdata is not flashed you will not be able to boot android. Your device should display something like this when that happens (in recovery mode):
E:copy_dbdata_media:cant mount DBDATA: copy default media conent failed.
Click to expand...
Click to collapse
But I guess you're ok
Just ignore step 7 if your device entered recovery mode automatically after flashing ended.

OP , did U enable the voice capabilities ? And what was your initial firmware ?
Do U feel confident to say that you can str8 go from whatever FW you have to JM6 as a full flash , and not anymore move your way up from JJ4 (russian FW ) ?
P

pakalrtb said:
OP , did U enable the voice capabilities ? And what was your initial firmware ?
Do U feel confident to say that you can str8 go from whatever FW you have to JM6 as a full flash , and not anymore move your way up from JJ4 (russian FW ) ?
P
Click to expand...
Click to collapse
If by voice capabilities you mean putting a sim card, yes, I tried and it works fine. I didn't test it that much, just a few calls and a lot of gprs. My initial firmware was jk5.
If I had a firmware older than JJ4 I'd just try to flash JM6 directly. I'm guessing here but I think that flashing JM6 the way I flashed it (following another guide in another forum) is like a full flash, it shouldn't matter what you had before.
Maybe someone with more knowledge could throw a light in here. What I can tell you is that I'd do it. I'm one of those guys that learn the hard way, and I've never bricked a device for good.

You're like me then. I do not even have my Tab yet but my fingers are already so much itching. In the meanwhile I am reading and learning. I am totally new to Samsung but I've had my hands busy for the past year with my Nexus One, so quite confortable playing with rom/kernel/radio world .
P_

Flashing for morons
Monrad, thanks, this is a super post.
Just for me and all the other morons in the world. Can you also please give a basic run through of what you've done. I have the following questions.
1) You have 3 waves of activities in your post: JM6, JMA, JMC. Generally, what is each wave doing?
2) Please would you also explain what the fields in Odin1.7 are for?
*PIT -does this set the partitions on Samsung tab?
*REPARTITION -if PIT file this is automatically selected
*AUTO REBOOT YES -why do I select yes
*F. RESET TIME YES -what's this one for?
*PDA: CODE_P1000XXJM6.tar.md5 -PDA is core PDA firmware?
*PHONE: MODEM_P1000XXJM6.tar.md5 -what does this do? load modem drivers?
*CSC: CSC_P1000OXAJM6.tar.md5 -I'm not sure what CSC stands for and does?
3) With regards to getting my dirty hands on the right firmware, when I go to http://www.samfirmware.com/WEBPROTECT-p1000.htm, I look at the latest firmware for Europe. At the bottom of the list are 3 downloads:
a) JM6, b) JMA, c) JMC. What are the differences between these firmwares. I understand that J = 2010, but don't know how to decrypt last two digits.
4) Which PIT should be used in Step 1 of your sequence? What are the PIT files at the bottom of the page (in Flash Tools Section) of http://www.samfirmware.com/WEBPROTECT-p1000.htm
5) I bricked my tab. I got it alive again, only by loading the JMA via Odin 1.7. Basically I put my Tab in Download Mode. Started Odin1.7. Used the Eur Pit file (referred to in my Step 4), and then loaded JMA.tar (extracted from JMA file mentioned in my Step 3). With all the check marks checked in Odin. That was it, and my Galaxy Tab rebooted and seems to work totally fine. Why would I do the other steps mentioned in your sequence? What benefit is there?
5a) Note when I do *#1234# I get:
PDA: blank
PHONE: P1000XXJMA
CSC: blank
the PDA and CSC show blank....is that why I should first load JM6 and follow your sequence? What functionality do I currently not have because of these blanks?
6) A question on rooting my Tab... what are the benefits to doing this?
Thanks for dealing with my long winded post! I really appreciate what you've done so far.

You are a good man, Monrad!
I followed steps and got my AT&T tab updated.
A word about wiping data: I had my Tab fully set up with original AT&T firmware and then I started installation I got into lots of trouble. Instead of recovery mode it went into blank screen with vertical white line (I suspect it did dbdata update behind it though), then it rebooted and my apps started crashing.
The only way to fix it was to get to setting and do factory reset. After that everything went by the book.
So you may want to clarify that data must be wiped from Android, unless you have some other way.
Thanks again

How and where do I find the Dbdata file ?
When I go for step 7 i get the "can´t mount" and "media content failed" messages.
Edit:
alexnoalex said:
So you may want to clarify that data must be wiped from Android, unless you have some other way.
Thanks again
Click to expand...
Click to collapse
I believe this can also be done from recovery.

i used roto-jmc and dont boot into recovery of flash dbdata.rfs seperately and everything is working fine.

kromosto said:
i used roto-jmc and dont boot into recovery of flash dbdata.rfs seperately and everything is working fine.
Click to expand...
Click to collapse
Where did you get the Roto-jmc?

from the link
http://forum.xda-developers.com/showpost.php?p=9989856&postcount=50

Great man. Thanks.
Edit: didn´t help. I still get the same errors.
I now seems to work. But my *#1234# says jm6 even on the jmc firmware?

Anybody knows what is the differences between JMA and JMC ?

You don't need to flash JMA. You can go straight from JM6 to JMC
You can skip oen unnecessary step

Can i do this on my euro Tab from Denmark?
Im on JM6
Sent from my GT-P1000 using XDA App

Just did the update from JMA on a euro tab, I took the firmware from samfirmware not the one on the first post. I don't know the difference but the size is not the same..
Everything works fine, even without doing a factory reset, all my applications are working fine.But I don't see any differences between JMA and JMC

Guys
Currently i have
PDA: P1000JPJJ1
PHONE: P1000JXJJ1
CSC: P1000OJPJJ3
Its currently arabic firmware. Can i use this guide & update to this Euro fimrware? I dont need arabic. I am not rooted as well. Will this guide work for me?

i have a problem, all ok till JM6
and tab after start fine
but for JMA or JMC no dbdata in recovery
help me (for now i'm back to JM6)

[Q] Dead ATT Galaxy Tab SGH-i987

Greetings,
Very respecfully I ask for advice on how can I fix my Galaxy Tab I got it in Puerto Rico US Territory,
1. I rooted the device using the available guides.
2. Then I try to unlock the device trying a European ROM using ODIN3 the instructions stated that I need to;
a. Re partition with a pit file
b. Reeboot device using power and volume down
c. Select the files as per instructions select PDA phone and csc files on the tar files i dont know how to identify each other or if I just need to select the entire tar file for all selection.
I have try JMC, JMA, JJ3 ROMs please let me know what can I do to fix my device if I can unlook it fine if not I just want to restore the default ROMs.
Please help....

d_scorpion76 said:
Greetings,
Very respecfully I ask for advice on how can I fix my Galaxy Tab I got it in Puerto Rico US Territory,
1. I rooted the device using the available guides.
2. Then I try to unlock the device trying a European ROM using ODIN3 the instructions stated that I need to;
a. Re partition with a pit file
b. Reeboot device using power and volume down
c. Select the files as per instructions select PDA phone and csc files on the tar files i dont know how to identify each other or if I just need to select the entire tar file for all selection.
I have try JMC, JMA, JJ3 ROMs please let me know what can I do to fix my device if I can unlook it fine if not I just want to restore the default ROMs.
Please help....
Click to expand...
Click to collapse
Noone could really tell what you did wrong and it seems you ahven't spent time to do your research, no offense.
Try typing in Bricked tab in the search box. It will yield several results. YOu will have to review them and try. This one looks promissing...http://forum.xda-developers.com/showthread.php?t=839469&highlight=bricked+tab

[GUIDE] How to use Odin for GT-I9070

Odin is the saviour tool for all Samsung devices. The method for flashing by Odin differs from device to device.
This thread will give step by step instructions on how to flash a stock rom from Odin on the GT-I9070/p :
A. Download Odin tools from here : http://d-h.st/3zJ
Pass : shaaan
B. Download the stock rom from www.samfirmware.com
Setting up Odin :
1. Make sure you have installed the necessary drivers for this device. The drivers can be installed from within KIES or seperately. (I will upload the drivers shortly).
2. Run Odin as administrator.
3. Setting up the files is divided in two types depending on the firmware type :
a. If the firmware is a multi package file, put the files in the corresponding sections.
ie. CSC file in CSC section, PDA file in PDA section.
b. If the firmware is a single package, add the single file in the PDA section.
4. Now that Odin is setup, put the phone in download mode. To do that, power off the phone and press 'home+power+volume down' buttons together. Keep the buttons pressed till Download mide appears.
5. Now that Odin and the phone are setup, connect the phone to the device. Odin will detect the device and show something like 'com port (1)'
6. Flash the device.
7. The flash will take 5 minutes for a full flash on average.
8. When the flashing is complete, DO NOT remove the device until Odin shows ' PASS '.
9. The device will reboot. Remove the device, go to recovery mode and do a factory/data reset.
That's it. Happy flashing peeps..!!

Awesome guide mate - messing around with our device without Odin is risky !

This should be sticky. A lot of people is asking how to revert to original FW, or similiar questions that is connected to reverting. And it is almost at the end of forum, and thay cant see it.

I pmed the mods to do it. But they won't budge..
Please pm them..

Nice guide!!!
And adding images would be a nice option.
And plz add a point which tells which buttons to press like
"Re-Partition" ,"Auto Reboot","F.Reset Time" ,"Flash Lock"......
Sent from my GT-I9070 using xda premium

Very good guide,good work !
It may be better if you add some images

atishey23 said:
Nice guide!!!
And adding images would be a nice option.
And plz add a point which tells which buttons to press like
"Re-Partition" ,"Auto Reboot","F.Reset Time" ,"Flash Lock"......
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
From what I was able to find in other guides it is ONLY 'Auto Reboot' and 'F. Reset Time' to be checked.
All others to be unchecked.
There are some posts not to bother with that .pit file that is inside Odin .zip file.
Odin package from sammobile got 2 .pit files for 8GB - GT-I9070_EUR_XX_8G and GT-I9070_EUR_XX_8G_20111220_KL6 and one for 16GB
(at least paired with XEO region XXLD1) not only that one we got in link form 1st post.
I was also able to find some info that if you use .pit check also 'Re-Partition'.
Now I am curious about if It would be good idea for me to actually Re-Partition my phone - bought it used (not new) and my PC detects only 4GB of internal SD. Will it increase custom binary counter? (so far it is at 0 and I would rather keep it that way)
Is it going to fix that issue so I will be able to use all 8GB (minus system partition)?
If so how to use it and what .pit file to take?
.pit only, re-partition only and run it once, then single-package as PDA with reboot and F. Reset on another flash run?
Or maybe all at once?
BTW you guys ROCK.
Rooted SGS i9000 2 years ago with this forum and now I am very close to do it again with SGSA.

th3cr0w said:
From what I was able to find in other guides it is ONLY 'Auto Reboot' and 'F. Reset Time' to be checked.
All others to be unchecked.
There are some posts not to bother with that .pit file that is inside Odin .zip file.
Odin package from sammobile got 2 .pit files for 8GB - GT-I9070_EUR_XX_8G and GT-I9070_EUR_XX_8G_20111220_KL6 and one for 16GB
(at least paired with XEO region XXLD1) not only that one we got in link form 1st post.
I was also able to find some info that if you use .pit check also 'Re-Partition'.
Now I am curious about if It would be good idea for me to actually Re-Partition my phone - bought it used (not new) and my PC detects only 4GB of internal SD. Will it increase custom binary counter? (so far it is at 0 and I would rather keep it that way)
Is it going to fix that issue so I will be able to use all 8GB (minus system partition)?
If so how to use it and what .pit file to take?
.pit only, re-partition only and run it once, then single-package as PDA with reboot and F. Reset on another flash run?
Or maybe all at once?
BTW you guys ROCK.
Rooted SGS i9000 2 years ago with this forum and now I am very close to do it again with SGSA.
Click to expand...
Click to collapse
It is normal to have 4GB on internall SD. The rest of it goes to system partition, application partition and RAM I think...

shut_down said:
It is normal to have 4GB on internal SD. The rest of it goes to system partition, application partition and RAM I think...
Click to expand...
Click to collapse
googled a bit more and found it out too :crying:
BTW - both of those 8GB .pit files are identical (according to 'comp' tool in windows) so there is no reason to use re-partition - other than sth went totally wrong and you are trying to recover from brick or sth serious as this .pit file is already on your device.
Just flashed unbranded stock for XEO region - original one was branded.
NOTE to anyone who is still thinking about safety of this method:
After initial reboot - when it was reconfiguring in recovery mode - or however you will call it (just before odin should say 'pass' - still in that little font screen) windows started to reinstall usb drivers - odin log in bottom corner said 'disconnected' and even then my newly flashed ROM is working as it should. I would rather keep it connected till Odin confirms all went as intended but in case of similar issue - do not get heart attack

odin is used for flashing stock roms only???

Kulwinder Singh said:
odin is used for flashing stock roms only???
Click to expand...
Click to collapse
nope it can also be used to flash custom Roms and kernels though flashing custom kernels via odin will increase your bin counter !

Hello guys...
How are you? I´m new on the i9070 threads!!! I´ve had others phones before, like SG2, xperia sola, live with walkman... so, i need the password to descompress odin... i search on thread but i don´t found it...
SORRY I found the password... shaaan

Of what I understand, can I test an unlimited number of stock firmware and the binary counter remain 0?
If I flash an unbranded firmware can I use SIM cards from other providers?
Now my phone is branded and I can not use SIM cards from other providers.
Thanks.

Kulwinder Singh said:
odin is used for flashing stock roms only???
Click to expand...
Click to collapse
Read please, sir!
http://forum.xda-developers.com/showthread.php?t=1985199
:laugh:

Someone help me? LINK

Hi i have downloaded the russian jelly bean 4.1.2 package but when i tries to flash it using odin3 v1.83 it shows me "The Parameter is incorrect" why???

sonimayurp said:
Hi i have downloaded the russian jelly bean 4.1.2 package but when i tries to flash it using odin3 v1.83 it shows me "The Parameter is incorrect" why???
Click to expand...
Click to collapse
Try to remove .md5 from filename.

shut_down said:
Try to remove .md5 from filename.
Click to expand...
Click to collapse
Hmm it worked thx..

Flash JB
Hi, I want to flash Jelly Bean , do i need to use the pit file , or just select one package and then select the rom??
Edit : flashed

This version of Odin does not work when flashing JB to my device.
I successfully used Odin3v3.07 from this post: http://forum.xda-developers.com/showthread.php?t=2086965
Please update this guide. I spent quite a lot of time trying to figure out what was wrong.
Thanks

Flashing a stock rom on my i9505

Hello, i recently purchased my galaxy s4 from online which came from Honk Kong, Because it is from there i believe it has the honk kong/chinese firmware on it (I9505ZHUAME3), I live in Australia so i want to flash it with its firmware (I9505XXUBMEA),so i have downloaded the australian firmware and kernel files, my phone is currently not rooted (i dont believe i need to root for a stock firmware?), Just wondering when i put my phone in download mode and open up odin, do i only need to put in the firmware file into pda or will i need to get a csc file or whatever the 'phone' button file is for aswell. Just making sure as i only got it the other day and dont want to screw it up. Thanks in advance!

eNormini said:
Hello, i recently purchased my galaxy s4 from online which came from Honk Kong, Because it is from there i believe it has the honk kong/chinese firmware on it (I9505ZHUAME3), I live in Australia so i want to flash it with its firmware (I9505XXUBMEA),so i have downloaded the australian firmware and kernel files, my phone is currently not rooted (i dont believe i need to root for a stock firmware?), Just wondering when i put my phone in download mode and open up odin, do i only need to put in the firmware file into pda or will i need to get a csc file or whatever the 'phone' button file is for aswell. Just making sure as i only got it the other day and dont want to screw it up. Thanks in advance!
Click to expand...
Click to collapse
This should answer all of your questions. If you are still unsure, let me know.
"How to do it:
Step 1) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button then proceed with volume up.
Step 2) Now open ODIN on your PC and connect your Galaxy S4 to your computer.
Step 3) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn blue (or yellow) and will show the COM port number.
Step 4) unzip the downlowded file (from second or third post), u will get a Home.tar file.
Step 5) click on pda (in odin) and choose the file "Home.tar"
Step 6) check "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
!!!!DO NOT CHECK "Nand Erase All" IN ANY WAY!!!!
Step 7) Click on Start button in ODIN window to start the flashing process. The process will take few minutes to complete.
DO NOT UNPLUG USB CABLE WHILE EXECUTING THE PROCESS, YOU MAY BRICK YOUR PHONE!
Step 8) When the installation is completed, you read a "Reset " then a "Pass". your phone will restart (first boot will take a longer time so don't panic)"

C.Sweat said:
This should answer all of your questions. If you are still unsure, let me know
Click to expand...
Click to collapse
I did view this before, but i was unsure if it did what i wanted, i want it so if i did buy my galaxy s4 in australia it would have all the same stuff like csc and pda etc ,

eNormini said:
I did view this before, but i was unsure if it did what i wanted, i want it so if i did buy my galaxy s4 in australia it would have all the same stuff like csc and pda etc
Click to expand...
Click to collapse
Thats fine but you need to read throughout the whole thread and use the search function to find answers to your questions. See here within the thread for your answer.
If ive been of any help, hit the "Thanks" button :good:

C.Sweat said:
Thats fine but you need to read throughout the whole thread and use the search function to find answers to your questions. See here within the thread for your answer.
If ive been of any help, hit the "Thanks" button :good:
Click to expand...
Click to collapse
Thanks heaps, one last thing, do i have to be rooted?, i am currently running the stock firmware.

eNormini said:
Thanks heaps, one last thing, do i have to be rooted?, i am currently running the stock firmware.
Click to expand...
Click to collapse
No
↙

C.Sweat said:
No
↙
Click to expand...
Click to collapse
Thankyou for the help, appreciate it

eNormini said:
Thankyou for the help, appreciate it
Click to expand...
Click to collapse
No problem. Good luck

Samsung Galaxy Y Wont turn on problem help asap

Samsung Galaxy Y, Idk what problem I have but im really confused now withh all the non sense. Idk if its looping or not cus sometimes it boots. then after a few minutes turns off again. I can go to Volume up+ home button + lock button then i tried the system recovery. it worked but then it booted up then after a few minutes same problem. Now it turns on and off and whatever. I tried the odin stuff. I downloaded usb drives then odin and the md5 thing. I tried first. it didnt show ready on the odin while i was on download. then next it showed a blue thing so i thought it was ready. I clicked the PDA with md5 in it. then clicked start. but it said FAILED. now idk what to do.
what else can I do and can someone pleaseee explain it step by step. thank you

Download the firmware files for your country from dokys thread at the top of of dev section
If you have kies installed stop it from running or Uninstall it
Install Samsung drivers http://forum.xda-developers.com/showthread.php?p=11498043
connect phone to pc
put phone in download mode (vol down home & power button)
right click on the odin icon and run as administrator
place csc file in csc
Modem in phone
Pda in pda
start flashing process
Do not repartition or use pit file

marcussmith2626 said:
Download the firmware files for your country from dokys thread at the top of of dev section
If you have kies installed stop it from running or Uninstall it
Install Samsung drivers http://forum.xda-developers.com/showthread.php?p=11498043
connect phone to pc
put phone in download mode (vol down home & power button)
right click on the odin icon and run as administrator
place csc file in csc
Modem in phone
Pda in pda
start flashing process
Do not repartition or use pit file
Click to expand...
Click to collapse
what is csc file and modem. I only have pda file named recovery.tar.md5

MeetJunx said:
what is csc file and modem. I only have pda file named recovery.tar.md5
Click to expand...
Click to collapse
Goto dokys thread in dev section!!! (sticky at top for odin firmware)
Download the firmware for your country
unzip the file & you will find modem pda & csc
Please just follow what I say - read dokys thread and you will have all your answers

his rponele
marcussmith2626 said:
Goto dokys thread in dev section!!! (sticky at top for odin firmware)
Download the firmware for your country
unzip the file & you will find modem pda & csc
Please just follow what I say - read dokys thread and you will have all your answers
Click to expand...
Click to collapse
Okay thank you I think this is what I need. but i'll do this tomorrow. But one more question. What will I download here? theres like 5? im from the Philippines. Thank you

MeetJunx said:
Okay thank you I think this is what I need. but i'll do this tomorrow. But one more question. What will I download here? theres like 5? im from the Philippines. Thank you
Click to expand...
Click to collapse
Iv no idea which is latest one for you
as a guide the first two letters represent region - xx = European then the further down alphabet next letter is the newer it is

marcussmith2626 said:
Iv no idea which is latest one for you
as a guide the first two letters represent region - xx = European then the further down alphabet next letter is the newer it is
Click to expand...
Click to collapse
so I followed everything. I have the csc modem and pda. But when it almost finishes like the green thing is almost done. The Cellphone turns off. resulting to failure. What do I do next?

already tried to flash it back/again on stock rom ? maybe it will help
im from philipines too

MeetJunx said:
so I followed everything. I have the csc modem and pda. But when it almost finishes like the green thing is almost done. The Cellphone turns off. resulting to failure. What do I do next?
Click to expand...
Click to collapse
It will turn off normally - leave it don't interrupt it or try another firmware

akosicarlo said:
already tried to flash it back/again on stock rom ? maybe it will help
im from philipines too
Click to expand...
Click to collapse
hey, Idk what flash or stock rom is. but im googling it right now. and im looking at a video. will this solve my problem with it turning off?

yeah ....
flash stock rom thru odin
note: after the process had been complete it will AUTO REBOOT (dont do anything on the phone) unless it already boot up