tethering between Archos Gen 8 and Android Phone - Gen8 General

Why is it impossible to use the tethering by BT between the Archos Gen 8 and more android phone ?
fortunately on the nexus one i wil be create a hotspot
but for another phones have you a solution ?

Hy with Samsung Galaxy 9000 it works very easy. Build up a Mobile Hotspot on the SGS and Connect with to the Archos, works perfectly.
Sent from my GT-I9000 using Tapatalk

why it don't work for anothers phones
n1 by eg ?

You can get it to work on N1 too ... but I don't think it is built into the phone though.
I use CyanogenMod 6 on my N1, and there are only options to do Wifi Hotspot (which burns battery power like there is no tomorrow) or USB tehtering.
But if you use the app called Wireless Tether, you can use BT tethering between your Gen8 and your phone.
Rockstar from ArchosFans' forums made a vid on how to do that: http://www.youtube.com/watch?v=CN4hBqIyI-U

i use the same
but for many android phones it is not possible

Yeah, I've been posting this same question all over the place begging for someone to help me tether to my Moto Cliq (rooted with tethering enabled). I even asked Archos and they sent me some generic response that didn't help at all.
I know my Cliq can tether, cause my PC can connect to it. But with my Archos, all I get is the "paired, but not connected" nonsense. No matter what I do. It's the same with my N900 as well. I am starting to think that the Bluetooth module on the Archos is defective. But I don't have any other Bluetooth devices to test it out with.
This thing is almost useless to me without tethering as a possibility.

most phones (including android ones) provides ad-hoc wifi tethering only (via 3rd party software), and archos cannot detect ad hoc wifi network.

henrylim said:
most phones (including android ones) provides ad-hoc wifi tethering only (via 3rd party software), and archos cannot detect ad hoc wifi network.
Click to expand...
Click to collapse
Android does not officially support AdHoc Networks. Once we have root we can make this work easily.

I did a walk through for bluetooth pan with a Droid X: http://forum.archosfans.com/viewtopic.php?f=74&t=43001
I tried the same with my wifes inc and it didn't work.

iPhone 4 and BT Tethering
1. Remove all previous BT pairing between iPhone and Archos 70.
2. Se both BT to active and discoverable.
3. Once you see iPhone under "bluetooth devices" in Archos, get it paired.
4. At this point, you will see that status on Archos is "paired but not connected"
5. In Archos, goto "Cell phone tethering", you should be asked to set up a tethering profile for Bluetooth or USB. Select Bluetooth and a new iPhone PAN profile will be setup.
6. Select checkbox for "Tether"
7. At this point, you will see Archos device in iPhone changed to "Connected", and a blue bar at the top says "Internet Tethering".
Bear in mind if iPhone or Archos goes to sleep, my experience is that the Internet connection is gone, no matter if the connection status remains. Therefore, please do not allow iPhone or Archos to go to sleep while you are using the Internet tethering connection.
Hope this works for you.

cajl said:
i use the same
but for many android phones it is not possible
Click to expand...
Click to collapse
WiFi Tethering has been introduced with Froyo for most phones. Before that you needed root and some app doing it.
WiFi Tethering with my Desire works great, but I wasn't able to setup Bluetooth Tethering between them. Like there are profiles missing to establish a network connection.

Try the Toshiba Bluetooth Stack, there is a 30 day free trial and it give you PAN. I have a HTC Eris and bluetooth tethering is not possible, it crashes the phone.

I have an Espresso running CM 6.1 and WiFi Hotspot works... Will I be able to use it with the Archos 70?

HTC Magic with Cyanogenmod 6.1 and the app 'Wifi Tethering' in bluetooth mode works perfectly.

I thought wifi tethering was going to eat the battery too.
Was able to tether from ~90% to ~10% for over 6 hours continuously on an Evo running cm6.1.1 with the built-in mobile hotspot.

I posted a .apk in post #3 that has worked for all the rooded android phones i have tried.
http://forum.xda-developers.com/showthread.php?t=887018

use mifi or similar product, i use a product from ZTE and work well. better don't use your android phone for wifi thetering, it will drain your phone battery much faster

use you phone to search for "google wireless tether" and download the apk this is free and works great for BT tethering between my 101 and moto droid 1.

henrylim said:
1. Remove all previous BT pairing between iPhone and Archos 70.
2. Se both BT to active and discoverable.
3. Once you see iPhone under "bluetooth devices" in Archos, get it paired.
4. At this point, you will see that status on Archos is "paired but not connected"
5. In Archos, goto "Cell phone tethering", you should be asked to set up a tethering profile for Bluetooth or USB. Select Bluetooth and a new iPhone PAN profile will be setup.
6. Select checkbox for "Tether"
7. At this point, you will see Archos device in iPhone changed to "Connected", and a blue bar at the top says "Internet Tethering".
Bear in mind if iPhone or Archos goes to sleep, my experience is that the Internet connection is gone, no matter if the connection status remains. Therefore, please do not allow iPhone or Archos to go to sleep while you are using the Internet tethering connection.
Hope this works for you.
Click to expand...
Click to collapse
This does not work for us with Sprint. Sprint uses CDMA not GSM. No APN on my Sprint HTC Hero. Tethering works perfectly with my Laptop and my HTC Hero using Bluetooth. NOT with Archos 70 IT.

crc111 said:
This does not work for us with Sprint. Sprint uses CDMA not GSM. No APN on my Sprint HTC Hero. Tethering works perfectly with my Laptop and my HTC Hero using Bluetooth. NOT with Archos 70 IT.
Click to expand...
Click to collapse
Uhh... I'm not having problems tethering with BT, Archos 101 and Sprint (HTC) Hero. Not at all sure what makes you think CDMA vs GSM has to do with this.
2.0.5pre7 wireless tether.

Related

Tethering my A101 to my Touch HD

I seem to be having problems tethering my A101 to my HTC Touch HD.
Bluetooth seems hit and miss. Any suggestions on correct procedure.
I also have a little app on my phone for establishing it as a wifi router. The app is wmwifirouter. While my lap top see's it fine the A101 just doesnt see it. Anyone managed to ge their A101 to tether to a wifi type connection their WM phone?
i'm having problem with it as well ... the A101 to my SE x10i ... the bluetooth can "see" the mobile but when it cannot pair ... this is plain stupid!!
i've tried to contact the Archos Support but no solutions as yet.
I tether my HTC Evo to my Archos 70 IT with zero issues. My Evo is rooted and I run the "Wireless Tether" app in the market (their website). It starts an ad-hoc WiFi access point that the tablet can connect to. I've never had any issues. The app supposedly works over bluetooth as well but I've never tried it.
I'm in the exact same boat as you airnike, except the issue is tether to my BlackBerry Bold 9780. I found a thread (listed below) that seems to offer me the possibility of getting my connection up and running - since it seems that it was a problem in the Archos firmware in the first place, maybe you can solve it by following the thread.
Because I am so new I cannot just post the URL, so here it is in a conveluted fashion.
h t t p ://forum.archosfans.com/viewtopic.php?f=63&t=46116
Stock Archos devices don't support ad-hoc networking, only infrastructure. Wireless Tether from the market supports ad-hoc and infrastructure mode. Some phones support infrastructure mode and some do not. If your phone does, you are lucky and it may work. There is a list of supported devices on the Wireless Tether website. There are also several threads on here about tethering and ad-hoc networking.
Tethering Blackberry is another problem, I think I read somewhere it was resolved now, but you need to type in a script in terminal.
Tethering Windows Mobile should be very easy. I always tether bluetooth from my Samsung i8000 to my 101. I never used wifi though as I reckon bluetooth is more battery friendly and speed is acceptable. What exactly is your tethering problem? what do you mean hit or miss? I've been consistently able to tether via bluetooth on my WM phone.
I have had some trouble tethering my Touch HD to my "101" as well - but finally this seems solved.
After pairing both devices, I found that I need to activate Bluetooth on both, then establish internet connection on the "HD" - and after that my "101" will tether fine.
The only strange thing I am a little unhappy with, is the fact that the tethering seems to break down when I turn off the screen of the mobile. When it switches off by itself, the connection appears to be stable.
i have a htc ozone wm phone how did u connect to your a101
What are the pro and cons of tethering via Bluetooth? I have Wi-Fi hotspot on my phone, and it worked perfectly right away. Could the Bluetooth use less battery?
Sent from my SilverBullet "HTCDesireZ running CM7"
This thread went a bit off topic eh?
Pete, did you ever get this working? I have a A101 16GB and a Touch HD. They tethered via bluetooth off the bat for me.
Running:
A101 16GB - UrukDrod 0.7
Touch HD - EnergyRom
If you want me to post steps, let me know.
Hello.
I'm having trouble tethering an Asus Transformer (stock) to my Touch HD (also stock).
I can pair them but they don't connect.
Tried the establish data connection/turn BT on/tether suggestion but no luck.
Any suggestions?
Cheers,
E
eborremans said:
Hello.
I'm having trouble tethering an Asus Transformer (stock) to my Touch HD (also stock).
I can pair them but they don't connect.
Tried the establish data connection/turn BT on/tether suggestion but no luck.
Any suggestions?
Cheers,
E
Click to expand...
Click to collapse
No clue. Wouldn't they know more in the Asus Transformer forums?
http://forum.xda-developers.com/forumdisplay.php?f=1104

Wifi Xoom and BT Tether

I've found several threads on the subject of Tethering a Xoom via BT and Wifi but I'm not having much luck and there's a lot of confusion about providers/Xoom versions/phones, etc. so rather than tag on to a thread I hope it's ok to start a new one.
I have the following:
Wifi Xoom (NOT the Verizon version, the one that just came out on March 27th here in the US)
HTC Hero GSM - completely unlocked (purchased in Europe). Running Android 2.1 standard update from HTC. I'm using the AT&T data plan but device is not an AT&T device at all.
I would like to see if I can Tether the Xoom to the phone and use the data connection I have on it. I understand that the Xoom's chipset doesn't allow for Ad-hoc networks. I've tried to do a Wifi Tether and although that works from my Laptop to my Phone the Xoom doesn't see the ad-hoc network. I don't believe there is any way for me to make the Wifi Tether work in Infrastructure mode so I don't think there is an option there (unless the Xoom can be modified somehow to see Ad-hoc).
So now I'm trying to use Bluetooth Tethering. I've tried both PdaNet and Wifi Tether (v2.0.7 and phone rooted via SuperOneClick). Both seem to start up fine and are running. I then pair the two devices but as many others have reported, I don't see any Tethering options on the Xoom so I'm stuck.
I've tried different orders of things... run Wifi Tether, pair, vs. pair then Wifi Tether, work with Airplane mode on vs. off, Wifi on vs. off, etc. but I never see that Tether option show up.
Anyone have this working with an HTC Hero GSM by any chance? Note that this is the Wifi-Only Xoom which seems to have different features than the Verizon 3G Xoom. Could it be that the Hero itself doesn't support this profile? Or can the Xoom be modified to force it to think the device is tetherable.
I'm not sure if rooting the Xoom would help any or maybe flashing a custom ROM like CM7 on the Hero would help any. I'd prefer not to have to do this but if someone has this working with my exact configuration I'd give it a try.
Any help would be appreciated.
From what i know, most tethering tech /apps are establishing a ad-hoc network' which the xoom isnt capable of...
I too have the Xoom wifi only version with a HTC rooted CDMA Hero.
As everyone knows now the Ad hoc will not tether with the Xoom infrastructure as of the latest.
I too get full bluetooth tethering signal from Wireless Tether, but like you the Xoom will "pair but not connect". As you, I am confused as to whether it is the Hero or the Xoom Wifi which will not connect to the bluetooth tether.
I suspect it is the Xoom Wifi, but would also like a definitive answer and better yet a viable solution.
I have no issue tethering my Xoom (Wifi model) with my Verizon Motorola Droid (1 Gen) over Bluetooth.
My Droid is full rooted with custom Gingerbread ROM (2.3.3) and Overclocked Kernel from ChevyNo1. His kernels are everything enable such as tethering and VPN. This might be the difference for some.
The one annoying thing is that everytime I enable the hotspot on my Droid, I have to go into the Xoom settings and enable tethering on the connection to my Droid. This also has to be done if either device goes not a range and brought back. I am trying to find a widget or a Tasker script to auto enable this.
Be sure to already start the wifi tether program on your phone (selecting the blutooth option on it) then bring up the blutooth settings menu on your xoom, just press and hold the little wrench you see to the right of your phone icon. it should bring up the tether option...just press that and you should see it conect via blutooth.
Just be sure to have the wifi tether app on your phone already on and set for blutooth. This works for me everytime (running the atrix) and shoujkd also work for your phone too.
Still no luck on my side with the Tethering on while I do the pairing and/or when I touch the wrench icon.
I'd like to understand more about how the Bluetooth profile is detected. Does my phone have to publish out a certain profile? Or does the Xoom have a list of device types that it knows are tetherable? I've read on another forum that it seemed like Motorola devices like the Droid worked whereas HTCs didn't seem to. I'm wondering if the Xoom detects the type of phone it's connecting to and decides whether it's tetherable or not... Anyone know? If this is the case maybe there's some file that can be tweaked on the Xoom to include additional devices or change the phone to broadcast out a different device name, etc. Maybe I should try changing my device name to 'Droid' or something.
Just guessing at this point....
I had the same issue with my droid, bluetooth tether is a pretty good alternative. I made a video of it, works with most phones with that create the Ad-Hoc. Check out video below to see the easy steps involved. Root on phone required.
Thanks for posting the video. This is exactly what I tried but does not work with my HTC Hero and my Wifi Xoom. I'm going to see if I rename my Bluetooth device name to 'Droid' to see if that makes any difference. I doubt it....
rosso said:
Thanks for posting the video. This is exactly what I tried but does not work with my HTC Hero and my Wifi Xoom. I'm going to see if I rename my Bluetooth device name to 'Droid' to see if that makes any difference. I doubt it....
Click to expand...
Click to collapse
I ran into a little bug, and it wouldn't recognize my droid. I had to unpair and turn on the bluetooth tether app. Then pair. The xoom then recognized the bluetooth tether. Hopefully this works, I apologize if it doesn't.
My wifi Xoom works perfectly paired with a CM7 Nexus One.
App: wireless tether
pd: key is the wrench
I tried renaming the bluetooth device name to 'Droid' but that didn't make a difference. I'm sure I'm following the same steps as in the video. Somehow the Xoom doesn't see the Hero as a Tetherable device...
Maybe there are some differences in Bluetooth chipsets?
Wifi tethering works with the Desire Z or the G2
I assume the network it creates is not an ad-hoc otherwise the xoom wouldn't have recognized it?
It's either not ad-hoc or you're using Bluetooth. You'd have to explicitly choose Bluetooth tethering in the Wireless Tether app so I assume you're using Wifi.
From what I understand some phones (the ones that are meant to be used as wifi hotspots) do broadcast in infrastructure mode rather than ad-hoc so I assume that's why it works for you.
Also of note is that Honeycomb only supports PAN tethering, and not DUN tethering.
Your phone also has to have "bluetooth tethering" turned on (however you do it, I don't have an android phone) so that the Xoom can discover the PAN bluetooth service.
Interesting. Something to read up more on. I'm using Wireless Tether to do the Bluetooth tethering but maybe I need something additional switched on. At least it's another direction to look at....
Seems like someone figured out how to get the Xoom to listen to Ad-hoc networks but that needs the Xoom rooted so I'll also research that. I prefer Bluetooth tethering since it uses less juice on the phone....
It does seem that "Wireless Tether" which is what I'm using on my HTC Hero, is running in PAN mode. If I look at the app's directory it has a pand executable, etc. and when I'm running the tether it is running pand in the process list.
Still, if I pair, even while it's running pand the Xoom still doesn't recognize it as tetherable. Grrr.... Wish I had another bluetooth client I could try to connect to see if it's the phone or the Xoom but I don't have anything else.
I'm wondering if it's because I have the Android 2.1 update for my Hero. Wireless Tether seems to support the 1.5 version of the Hero but doesn't mention 2.1. Maybe there is an incompatibility there...
Anyway, will continue to try to figure it out.
Rosso, your not on your own, I am still trying to figure this out on my hero running froydvillian. I have done the wifi ad hoc mod and thats working for me but BT tethering woudl be better, I will let you know If i ever find a solution.
I did see someone else loaded CM7 for the hero and then BT tether worked, but CM7 seems to have been pulled for the hero at the moment due to stability issues.
I have a droid eris (verizon's cdma hero) and I have the same exact problems but I'm on cm7and using wireless tether. I can get the to devices and connect via tethering but 5 seconds after that my phone reboots.
Just picked up a wifi-Xoom for my wife over the weekend. Tried to get it connected to my phone (HD2) as a wifi hotspot and was having problems (the ad-hoc problem). The xoom wouldn't even see the hotspot. I am running AmeriCanDroid 0413 build and it has wifi tether v. 3.0-pre11. So I switched back to winmo and still nothing, then I tried going to Darkstone SuperRam 1.5 (my fallback build). It has an older version of wifi tether, I think 2.06 or something like that and got the xoom to connect. I haven't had a lot of time to fool around with it, but it was able to get a network connection. Maybe you could try an older version of the wifi tether? I haven't experimented with the BT tethering yet. I don't want to root the xoom yet, maybe when my wife is tired of it.
/edit
Just checked the wifi-tether website and there is a new version of wifi tether and it supports softap which may help the xoom recognize the wifi hotspot.
Hi, I have just managed to get my hero bluetooth tethered to my htc hero.
The process I followed was basically what everyone has said:-
download wireless tether i am using 2.0.7
1. start bluetooth on phone and xoom (make discoverable)
2. Do not pair the devices yet
3. start up wireless tether, select bluetooth and tap to start the actual service
4. go back to bluetooth on your xoom and pair the devices
I then got an icon I had not had before and when I tapped the wrench I got the option to tether.
As for wifi tether your phone needs to put out infrastructure wifi for the xoom to see it, if its ad-hoc, you'll need to do the wifi mod so that he xoom sees adhoc
although as stated the new version of 'wifi tether' (which just seems to be the new name for the 'wireless tether' app) may fix that? but doesn't seem to support bluetooth as the 2.07 version does

[Q] Bluetooth Tether With WM6.5

So I have searched high and low and haven't had any luck finding any information about tethering the TF to a WM6.5 device. I am currently using a stock Touch Pro 2. When I pair the two devices together, under the BT settings on the TF there are no profiles listed. When I try to set up a network with the phone using "Share Internet Connection," I get the error message saying "Failed to establish internet sharing connection to remote device as it supports only Network Access Point (NAP) mode."
If anybody could shed some light on how I could actually get the the TF to tether with my phone, that would be greatly appreciated!
I have a Tilt2 running energy rom, normally i'd run wifi-router then all is well.
Apparently the Transformer doesn't accept AD-HOC and idk when it will be supported. The only way i can tether through wifi was to install FRX06 android.
Here's a link
http://forum.xda-developers.com/showthread.php?t=951962
Once you get to run android on your TP2 go to Settings -> Wireless and Networks -> Tethering & portable hotspot -> check the portable wi-fi hotspot box. You may add a passcode if you want but it will be defaulted to Open.
I've tried it and it works! Good luck!
dogmaxi said:
I have a Tilt2 running energy rom, normally i'd run wifi-router then all is well.
Apparently the Transformer doesn't accept AD-HOC and idk when it will be supported. The only way i can tether through wifi was to install FRX06 android.
Here's a link
http://forum.xda-developers.com/showthread.php?t=951962
Once you get to run android on your TP2 go to Settings -> Wireless and Networks -> Tethering & portable hotspot -> check the portable wi-fi hotspot box. You may add a passcode if you want but it will be defaulted to Open.
I've tried it and it works! Good luck!
Click to expand...
Click to collapse
+1 This is the only way you can get it to work on the phone side that I can find. Works flawlessly.
Transformer wont see 6.5 tether unless you root it.
Sent from my Transformer TF101 using XDA Premium App
Works fine for me, but slightly counter-intuitive. Firstly I paired the Phone and Transformer:
1. Set Phone to discoverable
2. Scan for devices on TF
Secondly, run Internet Sharing App (its in the tools folder on my WM6.5)
Select Bluetooth PAN instead of USB from the top dropdown and hit Connect
Now on the TF, selecting the Phone from the bluetooth settings should tether you
No rooting or modding of the TF required. Note this is Bluetooth tethering, not WiFi which doesn't work as WM6.5 WiFi tethering is Ad-Hoc, whci TF does not support without root and mod
eeit232 said:
Works fine for me, but slightly counter-intuitive. Firstly I paired the Phone and Transformer:
1. Set Phone to discoverable
2. Scan for devices on TF
Secondly, run Internet Sharing App (its in the tools folder on my WM6.5)
Select Bluetooth PAN instead of USB from the top dropdown and hit Connect
Now on the TF, selecting the Phone from the bluetooth settings should tether you
No rooting or modding of the TF required. Note this is Bluetooth tethering, not WiFi which doesn't work as WM6.5 WiFi tethering is Ad-Hoc, whci TF does not support without root and mod
Click to expand...
Click to collapse
Hi!
What version of Energy Rom are you using? for some reason i can only see USB on the dropdown, no Bluetooth. This is the internet sharing program.
eeit232 said:
Works fine for me, but slightly counter-intuitive. Firstly I paired the Phone and Transformer:
1. Set Phone to discoverable
2. Scan for devices on TF
Secondly, run Internet Sharing App (its in the tools folder on my WM6.5)
Select Bluetooth PAN instead of USB from the top dropdown and hit Connect
Now on the TF, selecting the Phone from the bluetooth settings should tether you
No rooting or modding of the TF required. Note this is Bluetooth tethering, not WiFi which doesn't work as WM6.5 WiFi tethering is Ad-Hoc, whci TF does not support without root and mod
Click to expand...
Click to collapse
I tried this method, but for some reason it still doesn't work. On the phone it says the following.
"Failed to establish Internet Sharing connection to remote device as it supports only Network Access Point (NAP) mode"
Also on the TF it still shows no profiles available with the phone. From what I have read in the forum is that the Touch Pro 2 is using the Broadcom Bluetooth stack and it doesn't' play very nice with other devices.
eeit232 said:
Works fine for me, but slightly counter-intuitive. Firstly I paired the Phone and Transformer:
1. Set Phone to discoverable
2. Scan for devices on TF
Secondly, run Internet Sharing App (its in the tools folder on my WM6.5)
Select Bluetooth PAN instead of USB from the top dropdown and hit Connect
Now on the TF, selecting the Phone from the bluetooth settings should tether you
No rooting or modding of the TF required. Note this is Bluetooth tethering, not WiFi which doesn't work as WM6.5 WiFi tethering is Ad-Hoc, whci TF does not support without root and mod
Click to expand...
Click to collapse
Which phone do you have? I have the same exact problem asthe OP using my Sprint TP2. I dont see Bluetooth PAN option in my TP2.
I was informed that if even our 6.5 devices would have that option to have bluetooth PAN active, our Transformers doesn't support DUN. Basically, it would be pointless to get internet through this bluetooth method Only thing that will happen is that we can share files with our WM 6.5 devices with our Transformer.
I have Omnia 2 running WM 6.5 using wmwifirouter (use trial version first). Launch using 3G BT, then under options - tools - Bluetooth - Swithch mode to PAN, then switch to discoverable.
Connects great - not the fastest, but I'll wait until we can have ad-hoc work or until I learn more about rooting.
i was able to to do blue tooth tether of Treo Pro 6.5 (raiderfan rom) Ill try it again once i get home and post details (in case it helps anyone)
mt TP2 screen broke and currently on my palm centro...(yes,,go ahead and laugh..haha)
might connect my tp2 just to try the tether. that phone is on a ENergy ROm
dogmaxi said:
Hi!
What version of Energy Rom are you using? for some reason i can only see USB on the dropdown, no Bluetooth. This is the internet sharing program.
Click to expand...
Click to collapse
this is exactly what i did on the treo pro
dogmaxi said:
Hi!
What version of Energy Rom are you using? for some reason i can only see USB on the dropdown, no Bluetooth. This is the internet sharing program.
Click to expand...
Click to collapse
Not using Energy ROM, running stock HTC WM6.5 on a Touch Diamond 2. If you don't get Bluetooth PAN in your drop-down I guess your ROM does not support it
Aye, Not only the Rom, but the device itself on wmwifirouter
http://support.wmwifirouter.com/devices/
HTC Touch Pro 2
AT&T Tilt 2
HTC Rhodium
Sprint Touch Pro 2
Support from version 1.50. Sharing using Bluetooth not currently supported.
Guess i have to research more for alternatives.
Fellow TP2 owner here, I just pushed the modded file over to the TF (need root of course) and WIFI tethering works like a champ for me. Need to keep the phone screen active from what I can tell but I'm just using the built in HTC WIFI Router, 3rd party apps might have other options.
So while Bluetooth might be nice it seems like a no go for us old school TP2 owners...
http://forum.xda-developers.com/showthread.php?t=1093778&highlight=ad-hoc
I guess it all depends on what rom you use.
I'm using the 1st generation touch pro with NFSFAN's rom. Bluetooth is right there under the internet sharing application and works flawlessly with my TF.
maoren99 said:
I guess it all depends on what rom you use.
I'm using the 1st generation touch pro with NFSFAN's rom. Bluetooth is right there under the internet sharing application and works flawlessly with my TF.
Click to expand...
Click to collapse
I don't think it's so much ROM specific as it is PHONE specific. Haven't heard of any TP2's that work with bluetooth tethering looking across multiple forums on the subject.

No BT tethering?

I am having no luck tethering between my iPhone with G 10.1 over Bluetooth. I am using the stock iOS tethering function. It connected and I got the blue icon on my GT, but when I access the internet, it says no connection (see attached).
Android never supported BT tethering. What do you expect? You need wi-fi tethering but again, most iPhone tethering apps (if you jailbreak) only support ad-hoc network and Android does not support ad-hoc networking.
On the other hand, if you *upgrade* your iPhone to a new Android phone and root the phone (if you get a carrier phone. Otherwise, you don't need to root the phone), you will be able to use the native Android wi-fi AP feature that your tab can easily connects to.
I have a DROID X and tether it through bluetooth just fine to my Galaxy Tab. Neither device is rooted running the latest OTA updates. I believe the functionality is from Gingerbread.
leadbelly76 said:
I have a DROID X and tether it through bluetooth just fine to my Galaxy Tab. Neither device is rooted running the latest OTA updates. I believe the functionality is from Gingerbread.
Click to expand...
Click to collapse
I stand corrected. I seems to work with various Moto Droid phones. But a few posts I saw mentioned it didn't work for iPhones.
Yep, when I had my Droid X I used BT tethering. I recently switched to a Thunderbolt and BT tethering no longer works, so I now use wifi, which is a perfectly fine alternative for me.
both bluetooth and wifi tether work with the iphone, all you need to do is replace the wpa file on the galaxy tab. Ill post the link when i find it, itson the developers part.
Edit: http://forum.xda-developers.com/showthread.php?t=1123638
Fallow the instructions, i use both bt n wifi
capufo said:
both bluetooth and wifi tether work with the iphone, all you need to do is replace the wpa file on the galaxy tab. Ill post the link when i find it, itson the developers part.
Edit: http://forum.xda-developers.com/showthread.php?t=1123638
Fallow the instructions, i use both bt n wifi
Click to expand...
Click to collapse
I am already tethering over wifi out of the box, between GT and iPhone. It's just BT that I am having trouble with, and I wanted BT because it is better on battery consumption.
Are you sure I need to mod the wpa file for BT? They seemed to be only talking about wifi adhoc in the thread, and didn't mention BT. Once again, I am able to tether and connect, just no data going through. As for support from Android, I was already able to tether over BT and wifi between iPhone and Asus transformer. Just the GT that I'm having problem.
I am not rooted, and so can't just try the file to see easily.
That file just added ad-hoc wi-fi support to OS. Doubt it has anything to do with BT tethering at all.
In order for BT tethering to work, you will need BT PAN protocol support in the GT. I tried myself with my Samsung Captivate running 2.3 Gingerbread and there is no PAN support at all on my phone. Not sure if there is PAN support on the TAB (it needs to be supported on both side). Given that they both are Samsung devices, I suspect Samsung didn't implement PAN protocol in either side.
To check if you have PAN, when you pair your tab to your iphone, on your tab go to settings->BT settings->your iPhone icon and tap the settings icon next to it. Did you see PAN service listed there? If not, you can't tether via BT.
foxbat121 said:
That file just added ad-hoc wi-fi support to OS. Doubt it has anything to do with BT tethering at all.
In order for BT tethering to work, you will need BT PAN protocol support in the GT. I tried myself with my Samsung Captivate running 2.3 Gingerbread and there is no PAN support at all on my phone. Not sure if there is PAN support on the TAB (it needs to be supported on both side). Given that they both are Samsung devices, I suspect Samsung didn't implement PAN protocol in either side.
To check if you have PAN, when you pair your tab to your iphone, on your tab go to settings->BT settings->your iPhone icon and tap the settings icon next to it. Did you see PAN service listed there? If not, you can't tether via BT.
Click to expand...
Click to collapse
When I went into setting of my GT, I see that my iphone is connected, and I can select tether. I will show that it is tethered, and a blue icon showed up as in my screen shot. Again, everything looked like its working, but no internet.
Its silly that a Droid can tether over bt and my galaxy s2 can't. Come on samsung...
Sent from my GT-I9100 using XDA App
ikeny said:
When I went into setting of my GT, I see that my iphone is connected, and I can select tether. I will show that it is tethered, and a blue icon showed up as in my screen shot. Again, everything looked like its working, but no internet.
Click to expand...
Click to collapse
I sold my Captivate in anticipating of a new phone from AT&T and dusted off my old BlackJack 2 WM6.1 phone. Enabled tethering on it and connected to my GT 10.1 via BT. Everything works out great. No problem. You will see two icons: one BT icon and one big blue BT icon once tethering is successful.
So, your problem is on your iphone side. Not GT side.
foxbat121 said:
I sold my Captivate in anticipating of a new phone from AT&T and dusted off my old BlackJack 2 WM6.1 phone. Enabled tethering on it and connected to my GT 10.1 via BT. Everything works out great. No problem. You will see two icons: one BT icon and one big blue BT icon once tethering is successful.
So, your problem is on your iphone side. Not GT side.
Click to expand...
Click to collapse
I see the two icons you described too, but GT not receiving any data. iPhone tethered with my Asus Transformer over bluetooth without problem though.
I don't know what to say. It has no problem with my 3-yead old and really slow Windows Mobile phone. My GT is now my temporary smart phone (using my Bj2 as data connection) until I AT&T gets its act together and release the Galaxy S2

Bluetooth pairs but won't connect

I have successfully paired my nexus 7 to my evo 3d and my HP laptop. However, it will not connect to either one. There is no connect option visible either. Both the laptop and my evo 3d connect fine to each other and other Bluetooth devices. Is my nexus 7 faulty or am I missing something?
Edit: ok it connects fine to my Bluetooth headphones, so why won't it connect to my phone or my laptop?
Sent from my Nexus 7 using xda app-developers app
i used foxfi and pdanet to pair my nexus 7 to my sgs3 and tether my nexus 7!, maybe those 2 apps could help
Thank you. That does seem to allow me to tether. But why won't my tablet connect on its own though the Bluetooth setting?
Sent from my Nexus 7 using xda app-developers app
is anyone else having trouble connecting (not pairing) their nexus 7 to a laptop or a phone without using any external apps? Just native settings.
Sent from my PG86100 using Tapatalk
Not sure if this helps, but I have Verizon and it seems that they block Bluetooth tethering while on 4G LTE. I could get my phone and nexus 7 to pair, but wouldn't connect. However when I switches my phone to 3G, my tablet and phone connected no problem. Its nice BC when they are connected your tablet automatically uses your phones internet. If I just want to use 3G, I go this route. When I want to connect them while my phone is on 4G LTE, I have to use foxfi/pdanet.
In other words connecting while the phone is on 4G seems to be blocked. Switch to 3G and see if that doesn't work to connect.
Hope this helps.
Sent from my Nexus 7 using xda app-developers app
hawleyncsu said:
Not sure if this helps, but I have Verizon and it seems that they block Bluetooth tethering while on 4G LTE. I could get my phone and nexus 7 to pair, but wouldn't connect. However when I switches my phone to 3G, my tablet and phone connected no problem. Its nice BC when they are connected your tablet automatically uses your phones internet. If I just want to use 3G, I go this route. When I want to connect them while my phone is on 4G LTE, I have to use foxfi/pdanet.
In other words connecting while the phone is on 4G seems to be blocked. Switch to 3G and see if that doesn't work to connect.
Hope this helps.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I tether 4G with my stock RAZR maxx without a problem. Turn off WiFi on both devices and it will probably work perfectly.
Sent from my Nexus 7 using xda app-developers app
I've paired my Samsung Galaxy S2 with my Nexus 7 and I can't access my phone from the tablet using ES File Explorer, though I can access the tablet from the phone.
--
Sent from my Nexus 7 using Tapatalk 2
Clicking on the other device in bluetooth settings usually gets it to connect for me. If I walk away from my tablet with my phone I have to redo the process.
94SupraTT said:
Clicking on the other device in bluetooth settings usually gets it to connect for me. If I walk away from my tablet with my phone I have to redo the process.
Click to expand...
Click to collapse
This doesn't work for me. The only option I am given is to unpair. I have tried it without WiFi as well. No go.
alsocnv new
awakener777 said:
This doesn't work for me. The only option I am given is to unpair. I have tried it without WiFi as well. No go.
Click to expand...
Click to collapse
I have the same issue as you. It may be that our phone don't have the right BT Profile for "Internet Access".
Are there any other options? I've tried FoxFi and that didn't create the "Internet Access" profile either. I'm on a Samsung Stratosphere with 2.3.
Nexus 7 Xperia X10 Mini
pitchdarkice said:
I have the same issue as you. It may be that our phone don't have the right BT Profile for "Internet Access".
Are there any other options? I've tried FoxFi and that didn't create the "Internet Access" profile either. I'm on a Samsung Stratosphere with 2.3.
Click to expand...
Click to collapse
I have also been trying to tether my new Nexus 7 with my old Xperia X10 mini. I can pair but not connect. I can't access my Bluetooth settings on my Nexus. I can't pass files vie Bump either. I can't get the wifi tether to the phone working either: My phone doesn't allow me to download Foxfi, my phone says PDAnet doesn't work on my version of Android. I bought the Nexus in the UK but I'm using it in Germany. My phone is with O2 which typically requires an additional €20 charge to tether. Any advice would be appreciated.
I think you folks are missing a setting?
Hi
Aside from pairing, on the device whose connection is being shared (i.e the phone), you need to goto settings-->More-->Tethering And Portable Hotspot, and make sure that 'bluetooth tethering' is selected.
This works on my Galaxy Note. 4.04 ICS
No 3rd party apps are required to do this. Note that Bluetooth PAN only came to android in 3.0. If your phone runs 2.3x or below, you'll need the software discussed elsewhere in this thread to make BT tethering work.
Whatever internet connection the phone has is shared, whether wifi or 3g
NB: Its a bit flakey! OK once connected, but requires BT to be cycled off/on on both ends...
Nigel
awakener777 said:
This doesn't work for me. The only option I am given is to unpair. I have tried it without WiFi as well. No go.
Click to expand...
Click to collapse
Mine also "pairs" but won't connect to my Galaxy S3. Also can't get Wifi direct to work between the two (ICS on the S3)
mmarquis said:
Mine also "pairs" but won't connect to my Galaxy S3. Also can't get Wifi direct to work between the two (ICS on the S3)
Click to expand...
Click to collapse
Theres a wee bug in android where after a new pair, restart, or occasionally on bluetooth disconnections bluetooth tethering will become disabled on the host device.
Go to the device with the Internet Connection and (on ICS / JB) hit Settings -> More -> Tethering & portable hotspot -> Bluetooth tething and check it.
You'll have to redo this regularly but combined with an occasional bluetooth off/on unpair / repair this will work.
(Nexus 7 / Galaxy Nexus - both rooted stock)
Hi
If you don't have the screen below (or equiv) mentioned in my previous post, then you wont be able to tether without using 3rd party apps. I guess the BT PAN profile is missing where this option is not available.
veletron said:
Hi
If you don't have the screen below (or equiv) mentioned in my previous post, then you wont be able to tether without using 3rd party apps. I guess the BT PAN profile is missing where this option is not available.
Click to expand...
Click to collapse
I don't have the BT tethering option on my AT&T S3. Guess I'm out of luck.
veletron said:
Hi
Aside from pairing, on the device whose connection is being shared (i.e the phone), you need to goto settings-->More-->Tethering And Portable Hotspot, and make sure that 'bluetooth tethering' is selected.
This works on my Galaxy Note. 4.04 ICS
No 3rd party apps are required to do this. Note that Bluetooth PAN only came to android in 3.0. If your phone runs 2.3x or below, you'll need the software discussed elsewhere in this thread to make BT tethering work.
Whatever internet connection the phone has is shared, whether wifi or 3g
NB: Its a bit flakey! OK once connected, but requires BT to be cycled off/on on both ends...
Nigel
Click to expand...
Click to collapse
Thanks for this. All was working fine between my UK (stock European with a few Vodafone apps) Samsung Galaxy S3 (SIII) and Note 10.1 until I upgraded to 4.1.1 on my S3. It seems this option was added then or disabled by default. All working splendidly now, cheers.
Droid Razr Nexus 7 connection
All,
You can tether the 4G LTE on a nexus 7 you just have to enable bluetooth tetheriing in Setting > Tethering & Mobile Hotspot > Bluetooth tethering
Without doing this, it won't link via bluetooth tethering.As for laptop, you have to allow access point in your laptop in order to allow the Nexus 7 to fully connect to your laptop to share files.
Cheers!
This thread has the most similar problems that I have. By me the problem is opposite. I need to get internet connection on my phone (xperia U) and the only way is through tethering through my iphones hotspot. Bluetooth says paired but not connected and wifi hotspot isn't found in the list of wifi networks.
Bluetooth tethering worked fine on ICS but I downgraded to GB and now nothing. I can't install 3rd party apps yet because no internet on phone.
Is there no other option? Is it either GB, lag free phone but no tethering option or laggy ICS phone with tethering??

Categories

Resources