Database Users

[ROM]RUU_Mozart_Orange_UK_1.30.061.01_5.54.09.21_22.33b .50_RELEASE

Here new RUU for Mozart
http://www.filefactory.com/file/ca0..._1.30.061.01_5.54.09.21_22.33b.50_RELEASE.exe
Enjoy!
ROM contains NoDo update build 7355-89

Football said:
Here new RUU for Mozart
http://www.filefactory.com/file/ca0..._1.30.061.01_5.54.09.21_22.33b.50_RELEASE.exe
Enjoy!
ROM contains NoDo update build 7355-89
Click to expand...
Click to collapse
an official rom with the update included ?

The old flash junkie in me tells me to try it ... but at the same time don't want to lose all my settings and txt's etc etc ...
decisions decisions...

Has anyone told you they love you lately?

Infuriated-Germ said:
The old flash junkie in me tells me to try it ... but at the same time don't want to lose all my settings and txt's etc etc ...
decisions decisions...
Click to expand...
Click to collapse
There aren't that many settings to go re-enter anyway. I like a clean call log and text history so I am going for it. Only 15m left for download to complete and my phone needs charging

Its the loss of schaps advanced config tool (for custom theme colors) and ability to modify ringtones etc that bothers me most.

Just flashed this.
Copy/paste is there, the phone seems faster and the screen contrast higher;
OS: 7.0.7389.0
Firmware: 2250.09.13001.061
Radio: 5.54.09.21_22.33b.50.10U
Bootloader: 1.30.2250.1

Are the Orange Apps installed as well ?
Notice any issues with Zune sync ?

Спасибо))) то не было на ораж ничего то nепрь сразу с NoDo

How to
Been a long time flasher, with my touch pro 2 using energy roms so know what im doing.
But this rom seems different.
1. what is the correct process to flash this rom.
2. do i have to debrand first
3. do i need to install active sync, i have but it says drivers failed to load. I am running 64bit win 7
4. do i need to put it into boot loader
5. should i just wait for the official one.
6. i really dont want to do number 5.
please help
1. Correct process is you do need active sync, just make sure its the correct one for your system
2. No debranding needed,
3. See question 1
4.Yes bootloader is needed to flash with active sync
5. dont wait for official on as all updates are included.
and for other question on forum, yes all orange apps are included and seenm to be working
hope this helps everybody

i didnt think you needed active sync for wp7 devices only zune?
in anycase can someone who has done the upgrade please confirm:
1. You can go from old orange rom to the one above by simply running rom update or do you still need to copy over ruu signed file etc?
2. does the phone need to be unlocked?
3. you can use normal cable supplied with phone.
sorry for my ignorance. but everyones seems to be asking the same questions but no-one has of yet put up a defintive guide.

1. Yes you can flash from any Orange ROM to 1.30
2. No need to unlock the phone
3. Normal cable is fine
To flash, enter bootloader mode, close Zune and start the flashing utility. Bootloader mode can be accessed by pressing the volume down button while powering up. Make sure you are at 50% or above battery life.

Ca5c4d3 said:
1. Yes you can flash from any Orange ROM to 1.30
2. No need to unlock the phone
3. Normal cable is fine
To flash, enter bootloader mode, close Zune and start the flashing utility. Bootloader mode can be accessed by pressing the volume down button while powering up. Make sure you are at 50% or above battery life.
Click to expand...
Click to collapse
Confirmed everything works as above.
Slightly Scary moment during Flashing where it reached 9% and then rebooted the phone but continued successfully.
After such a hype about copy/paste ... wished the function worked better. Overall performance does seem much improved.

Thanks guys, will give it a try.
did you guys extract the files using winrar and then run the ruu file or did you just double click the file once downloaded?

amowolves said:
Thanks guys, will give it a try.
did you guys extract the files using winrar and then run the ruu file or did you just double click the file once downloaded?
Click to expand...
Click to collapse
After download I did the following:
Disabled File Defense on my Firewall (using Comodo FW & Windows 7)
Switched my phone off.
Restarted in Bootloader mode (While holding VOL DOWN key, Press Power button to turn on)
Connected the USB cable and waited for Windows to installs the correct driver.
Bootloader screen changes from "Serial" to "USB" (bottom of the screen)
Ran the EXE (as is, without unrar etc) as Administrator
Watched, waited, rebooted ... all is good.

nice one, cheers. will it give it a go tonight. fingers crossed.

Just run my phone next to my friends. both phones are orange but his version is 1.25.
1.30 boots faster, applications launch faster and the screen contrast is indeed higher. Also noticed a couple of new features such as automatic time sync from network and the phone now goes to vibrate during meetings automatically as windows mobile does.
I had to switch off auto time sync since orange uk was reporting 20:30 at 13:00

Just wanted to say thanks to all. I did the update last night and first impressions are good. seems smoother, faster, brighter. so far so good.
thanks for your help and thanks football for providing the rom.

How on earth do I install this on my phone?
I have Active Sync installed, Zune is installed, All drivers are installed.
Booted up in bootloader, started up the update in admin mode, and it keeps saying connection error like it doesn't pick up my phone.
What am I doing wrong?

atomfix said:
How on earth do I install this on my phone?
I have Active Sync installed, Zune is installed, All drivers are installed.
Booted up in bootloader, started up the update in admin mode, and it keeps saying connection error like it doesn't pick up my phone.
What am I doing wrong?
Click to expand...
Click to collapse
This is the steps I went through and worked first time.
1. Download Rom.
2. Download correct active sync for your system i.e. 32/64 bit.
3. Put phone into boot loader. Power off phone. power on holding the power button and volume down. this will take you to the three bar colour bootloader.
4. connect phone to pc using standard usb cable. which should say usb on the bottom bar.
5. run active sync, this should now find and connect to your phone.
6 run rom update with or without unzipping that is up to you.
7 wait for update to flash. this does take about 4 - 5 min but seems like forever.
Hope this helps anybody wanting to do this as it is well worth it.

How To Flash a Demo LG Quantum?

Heya!
I bought a demo LG Quantum for a song today and I've been trying to remove the Demo software by following these instructions:
Through work aquired a Mozart with Telstra Demo(Store) Rom. Very furstrating as it wouldnt hold settings and kept playing that damn video.....
Downloaded this rom (following the links from here and trying a few download mirrors until I found one that worked)
Turned off Phone
Held Volume Down Key while Pressing Power Button (This turns the phone on and launched Bootloader)
Connected to PC Waited about 5 minutes while Windows auto detected the drivers and installed what it needed
Right Mouse clicked on the downloaded Rom and selected "Run as Administrator"
Followed the prompts.
****NOTE**** When it got to 10% the phone rebooted - LET IT!!!!! DO NOT TOUCH IT DO NOT DISCONNECT IT - Just wait -The computer will redetect and about 10 Min later VIOLA - All sorted nice and clean WP7 HTC Mozart (with a with Telstra One Hub - which aint that bad) - Whacked the 3 Sim card in - Downloaded Connection Setup Wizard from market place and a few minutes later was sending and receiving MMS etc
Click to expand...
Click to collapse
However, I don't know if this applies to the LG Quantum since I can't seem to access the Bootloader screen and the ROM I can't find an executable ROM file like the one he refers to.
Has anyone resolved this problem on their Quantum?
Could you help me through it?
Thanks in advance,
-Aylmer

Nevermind! I was trying to flash it, but, in the LGDP2 Flashing app, I was plugging in the phone before pressing start!
Oups!

If you're still having problems, the other trick is to use the drivers from the LG Mobile Support Tool.

I got mine from eBay for $100...it is a Demo unit. This thread is very helpful and hope to remove the "Device Alive" software and enjoy my nifty windows phone!
As an avid Android and iOS user I look forward to having fun with WP7

voltagex said:
If you're still having problems, the other trick is to use the drivers from the LG Mobile Support Tool.
Click to expand...
Click to collapse
How would that trick work?

Does anyone have the link for the stock rom? I can't seem to be able to download from http://depositfiles.com/en/files/tmh1fz1ed. It always says invalid param. Could anyone post it here or upload it to mediafire or something? Thnx

ok managed to download the LG c900 ROM but installing the LGDP2 gives me the Installshield error , Catastrophic Error. And my LG USB Modem doesn't wanna install

Could you give more detail about the problem?
Also, which version of Windows are you using?

[Q] Cannot change baseband

okay..got an s4 on o2. Used the unlock method, to get into the utms menu, i updated the baseband with a certain version,now it just wont change it via the odin flash? Any ideas. The handset is unlocked but for some reason, whenever i lock the phone and turn back on,the network drops. If i keep the screen on,the network remains. Ive tried a few roms and tried changing the baseband on all of them
but for some reason it wont stick...any ideas?

arknailed7754 said:
okay..got an s4 on o2. Used the unlock method, to get into the utms menu, i updated the baseband with a certain version,now it just wont change it via the odin flash? Any ideas. The handset is unlocked but for some reason, whenever i lock the phone and turn back on,the network drops. If i keep the screen on,the network remains. Ive tried a few roms and tried changing the baseband on all of them
but for some reason it wont stick...any ideas?
Click to expand...
Click to collapse
Try this one mate
Turn off your device
Boot into downloadmode
Open Odin / Select Phone/CP
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Power+Vol down)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.

That worked spot on. Phones still unlocked. Not network drops at all.
Thank you mate
Sent from my GT-I9505G using XDA Free mobile app

Hi,
I have a questions on iphone unlocking... I'm not sure if this is the correct forum for this.
I have an iphone4g japan release. I have checked the imei number 012425004224049 online.. Showed that it's not blacklisted on softbank but is blacklisted on verizon.
1. How was it possible to be blacklisted with verizon and it was a japan release iphone?
2. Is there a way to reflash iphone baseband running on ios7.1.1 from BB 4.12.09 to 1.59.00 to be able use gevey sim?
3. Is it possible to replace ios7.1.1 baseband file ice_4.12.09 in the ipsw and replace it with the unlockable BB file ice_1.59.00
Then restore the iphone with the customized ipsw?
4. Can we reverse engineer ipsw file? How?
Sent from my iPhone using Tapatalk

[Q] Help! Samsung S5 no service

For two weeks, my Samsung Galaxy S5 SM-G900F has no signals. It keeps showing No Service, I can't receive calls/messages at all.
I have used Smart Tutor to contact Samsung, their engineer reset the system (maybe), but couldn't make it work. Then I sent the phone back to UK service centre, they sent it back to me quickly with doing anything --just because my phone is not in European warranty. :crying:
The details of the phone:
IMEI is right, fireware is Country: Hong Kong, PDA: G900FZHU1BOA1,
From I have read, it seems like the Radio was turned off. But I don't know how to turn it on.
I tried to enter Service mode by dialing code *#*#4636#*#* but it didn't work for me.
I can get into ServiceMode by code *#0011# but I don't know what to do next.
Any help would be greatly appreciated!

Flash radio/modem or full firmware for the country you are in?

How to flash radio/modern?
*Detection* said:
Flash radio/modem or full firmware for the country you are in?
Click to expand...
Click to collapse
I don't know how to flash radio/ moderm, could anyone give me some guide please?

lyrruo said:
I don't know how to flash radio/ moderm, could anyone give me some guide please?
Click to expand...
Click to collapse
1 Turn off your phone
2 Download and install Samsung USB Driver
3 Connect USB cable to PC (do no connect phone)
4 Hold Volume Down + Home Button and power on phone, follow onscreen instructions to enter Download Mode
5 Download and unzip Odin
6 Connect phone to PC, wait for Windows to install the device drivers
7 Download modem
8 Run Odin and load modem in "CP", flash modem
:good:

lingowistico said:
1 Turn off your phone
2 Download and install Samsung USB Driver
3 Connect USB cable to PC (do no connect phone)
4 Hold Volume Down + Home Button and power on phone, follow onscreen instructions to enter Download Mode
5 Download and unzip Odin
6 Connect phone to PC, wait for Windows to install the device drivers
7 Download modem
8 Run Odin and load modem in "CP", flash modem
:good:
Click to expand...
Click to collapse
Hi lingowistico,
I did what you said, but it still can't work.
Is the modem not for the UK? (btw, the phone was from Hongkong, but I use it in the UK)
help......

Aside from the radio/modem that you should try flashing i suggest trying a custom rom as i had a similar issue on the official one

shirogeek said:
Aside from the radio/modem that you should try flashing i suggest trying a custom rom as i had a similar issue on the official one
Click to expand...
Click to collapse
How should I do that?

lyrruo said:
How should I do that?
Click to expand...
Click to collapse
You can do that by reading the stickies like everyone else does instead of expecting that someone else will do it for you.

same here in 3 different devices...
The same happened to mine and my wife's devices. Since last Saturday I rooted them both, load 4.4.4, then ulgrade them to 5.0... downgrade them again. Tried flas modem a d flash radio. Seems nothing is working. Both are g900h. And today just realized that my cousin's g900f just have the same issue since friday. How can I know the date of the automatic installed updates... maybe some update cause this?
Also tried shortcut master to enter the secref codes with super user... no code is working...
The signal just comes and go every 5 mi utes. Sometime I can make a phone call but it crashed like 1 minute after I made it. Lazy data signal.
What else do you guys reccomend?

[Question] J500-FN Wont detect Wi-Fi after factory reset.

Hey folks, my Dad got a Sansung J500-FN (2016) from his friend and is now having a problem setting it up.
Problem:
He performed a factory reset on the device and now it wont find a network connection during the setup.
After selecting the landuage, it just sits there scanning for available connections and never finds any.
Tried:
Clearing cache and further factory resets (With and without several different SIM cards)
Connecting through WPS (It times out)
Entering the network details manually
The Wi-Fi in the house is bradcasting it's SSID and other devices are connected to it and working without issue.
Question:
Is there anything we can do to get past this stage of the setup or force it to connect?
Would flashing a stock ROM resolve the issue and can this be done via a SD card (USB debugging/Developer options are off as the PC wont detect the device).
The device is completley stock at the moment.
I'm at a bit of a loss as what to try next and seem to be going round in circles trying to find a solution, so any advice would be greatly appreciated.
I haven't played around with this stuff since my Galaxy ACE
If you need any further infor just let me know.
Cheers
Oxydin

Hi,
The problem may get solved by flashing the latest Firmware!
If you want to flash Official Samsung stock rom /firmware, you have got to use ODIN which works from a windows PC with the mobile connected through USB wire when in the Download Mode ( Recovery Mode>Boot Loader> Download Mode ) & it needs that your device is detected by the PC as an MTP device i.e. it shows in the Computer folder with a mobile icon & files can be transferred between the PC & Mobile when connected. For USB debugging some Samsung USB drivers would be needed to install on the Windows PC but developer mode is not needed on the mobile.
Don't just go ahead but to give you an idea as to what you are going to do in the near future : Update/Flash/Unbrick your device via Odin
1. I suppose you are running Windows 8 or later on the PC. Get to know what is wrong with the PC or Operating System : Try another PC, Try another Operating System, Try another USB port, Try another USB connecting wire. Check whether 'Auto Play' is selected in the Operating System settings. Is it all well in the 'Device Manager' before & after connecting the mobile ? When you connect the mobile to PC, the PC should be connected to the internet. 'Device Installation settings' should be set to automatically install drivers from windows update. ( It would be better if you can make a system image for precaution & install pending windows updates )
2. In which country you are using the device ? Which is the Internet Provider ? Did you try another Wifi services ? What is the usability of the device at the moment : Can You use the mobile data ? What is the CSC of the installed firmware on your device ? ( I am interested Just in the CSC Code! )
Let us know.
Thanks.

Thank you for the reply @LittlePro
1.
The computer is running Winows 10 Build 19043
It is connected to the internet via Wi-Fi and this is working as good as it gets in my location.
Autoplay is on (Set to 'Ask me everytime')
Samsung USB drivers are installed and Windows update set to automatically download.
* Swapping ports/cables and trying a different Wi-Fi etc will take time. I am currently confined to bed following a motorcycle accident a couple years ago (Damn Pressure Sores). Next time I'm back in the wheelchair I'll try this and update. It may be due to the port or USB extension I'm using (The PC does detect my Alcatel phone without issues)*
2.
In which country you are using the device ? Portugal
Which is the Internet Provider ? MEO
Did you try another Wifi services ? Not yet, this will take time (See * above)
What is the usability of the device at the moment ?
I can access Recovery/Download modes (Vol Up+Home+Power/Vol Down+Home+Power)
When starting the device normally, It asks me to choose a language and then moves to the 'Scanning for Wi-Fi' screen. It goes no further than this.
Can You use the mobile data ?
After a factory reset there is a popup message asking if I want to turn mobile data on/off. This is set to On, but it doesn't seem to use mobile data.
What is the CSC of the installed firmware on your device
The device was originally in the UK with an EE contract the CSC is - EVR
As soon as I can, I'll try the other suggestions and post an update.
Appreciate the the info, thank you.
Oxydin

Hi,
Oxydin said:
The device was originally in the UK with an EE contract the CSC is - EVR
Click to expand...
Click to collapse
That means it is branded. That may be locked to use with EE services. You should look for a firmware for the model : SM-J500FN & Region : TPH
TPH is unbranded firmware for Portugal. My first choice would be that. If you want latest firmware, it comes from Spain unbranded : PHE
The other option may be BTU which is unbranded from UK.
The way to download for me would be either there .That needs membership OR the tool as there.
Let me know.
Thanks. ...
EDIT : It seems MEO from Portugal, PHE from Spain & BTU from UK!

UPDATE:
Managed to get my lazy ass out of this bed, so I was able to check cables/ports.
The USB cable I was using would charge the phone (albeit very slowly) but wouldn't allow data transfer.
Swapped this with another cable and now the PC detects the phone without issue.
I've updated the firmware to the one from spain (PHE). The one from Portugal (TPH) installed the Unbranded firmware for Romania (ROM) for some reason.
Both installed without issue, but I figured if the latest version was the Spanish one, I may aswell use that.
Unfortunately I'm back to the initial problem.
I can select my language and then I'm stuck on the 'Scanning for networks' screen.
There is a new message that appears, saying - An unauthorized attempt has be made to factory reset your device. Please log into your account to verify your identity. Convinced this phone is now just laughing at me lol
I still need to get out of the house to try some other Wi-Fi networks, to see if it just doesn't like my home Wi-Fi
Will update again once this is done or I figure anything else out.
Cheers
Oxydin

Hi!
Oxydin said:
The one from Portugal (TPH) installed the Unbranded firmware for Romania (ROM) for some reason.
Click to expand...
Click to collapse
It seems TPH is a service provider in Portugal & the unbranded one from Portugal is MEO ?
Oxydin said:
There is a new message that appears, saying - An unauthorized attempt has be made to factory reset your device. Please log into your account to verify your identity. Convinced this phone is now just laughing at me lol
Click to expand...
Click to collapse
The device is connected to a particular Google Account which was previously used on this device. Try flashing CSC instead of CSC_HOME. There are also other options in the ODIN but honestly I am not sure about their consequences!
Let us know.
Thanks. ...

Yeah the unbranded one for Portugal seems to be MEO, so I've installed this one (This also happens to be my ISP)
The device still wont detect a W-Fi network.
At this point, I'm beginning to think that there may be a problem with the device itself.
So I'm currently looking around for something to test this.
All the files I downloaded only had one CSC file in them (There was no CSC_HOME). The current file is -
CSC_MEO_J500FNMEO1BQA1_CL10432640_QB12297267_REV00_user_low_ship_MULTI_CERT.tar
I figured that was what that message meant. If only I could progress to that stage.
Guess I'll keep searching. On the brightside, I'm learning a bit more about phones.
Cheers
Oxydin